Home  Administration > Monitor Administration > SiteScope Data Collector Configuration > Managing SiteScope > SiteScope Preferences > Pager Preferences > Configuring Pager Preferences Properties > Pager Connection Options



Pager Connection Options

There are four different methods for sending a message to your paging service.

The preferred method is to connect directly to a modem at your pager service. When a modem-to-modem connection is used, SiteScope is able to verify that the message was sent successfully and can receive messages describing any communication problem. The other connection options generally send messages to automated voice response systems using touch tone dialing. The touch tone dialing method is limited to numeric messages and SiteScope cannot confirm that your paging service correctly received the message.

Select the pager connection option you want SiteScope to use to send pages. Click the radio button to the left of the connection method you want to use and fill in the associated fields as indicated.

Modem-to-Modem Connection (Preferred)

Click the radio button to the left of this option if you have an alphanumeric pager and use an alphanumeric paging service. In the Modem Number text box, type the phone number to use for sending alphanumeric pages to the paging service modem. This number is provided by your paging service. Sometimes, the paging service will call this the TAP/IXO number. Some of the Modem Numbers for the larger services are:

In the PIN number text box, type the last seven digits of the PIN number for your alphanumeric pager. Then Press the Save Changes button to save these settings.

Dial and Enter Message

Click the radio button to the left of this option if you dial a direct phone number to send a page. Most local paging companies work like this. In the Phone number text box, enter the phone number exactly as you would dial it from your telephone, including other numbers you might need such as a number to get an outside line. You can use dashes to make the number easier to read, but they are not required. Use commas to separate the portions of the phone number. Each comma causes the modem script to pause for a few seconds before dialing the rest of the number.

For example, if you are dialing your pager from your office and you have to dial 9 to get an outside line, you might type:9, 555-6789.

Press the Save Changes button to save these settings.

Dial, Enter Command, and Enter Message

Click the radio button to the left of this option if you have a direct number, but need to enter a command before sending a page. Also, choose this option if your paging company uses a single phone number for all pagers and requests a PIN number before sending a page. In the Phone number text box, type the phone number exactly as you would dial it from your telephone, including other numbers you might need such as a number to get an outside line. You can use dashes to make the number easier to read, but they are not required. Use commas to separate the portions of the phone number. Each comma causes the modem script to pause for a few seconds before dialing the rest of the number.

For example, if you are dialing your pager from your office where you have to dial 9 to get an outside line, you might type:9, 123-4567

In the Send page command text box, type the page command exactly as you would dial it from your touch tone telephone.

Press the Save Changes button to save these settings.

Custom Modem Connection

Click the radio button to the left of this option if your paging company does not use any of the previous connection choices. In the Modem command text box, type the entire modem command including the phone number to dial, any additional digits, and $message. SiteScope replaces $message with the message you specified for each alert. Use commas to separate the portions of the phone number. Each comma causes the modem script to pause for a few seconds before dialing the rest of the number.

For example, if the number for the pager company is 123-4567, your pager PIN is 333-3333, and your pager company requires that you follow each command with the # key, the command might look like this:

ATDT 123-4567,,333-3333#,,$message#

Note: For SiteScope running on UNIX, enter the device path for your modem in the Modem Path box. To see a list of devices using Solaris, use the ls /dev/term/* command.




Copyright 2006 Mercury Interactive Corporation