Home  Administration > Monitor Administration > SiteScope Data Collector Configuration > Managing SiteScope > SiteScope Preferences > Pager Preferences > Configuring Pager Preferences Properties



Configuring Pager Preferences Properties

Use the following steps to configure the default Pager Preferences properties.

To configure Pager Preferences properties:

  1. Click on the Preferences container in the left menu tree. The Preferences container contents is displayed.
  2. Click on the Pager Recipients link under the applicable container in the right hand panel. If necessary, click on the Properties tab in the upper right hand corner of the right hand panel to display the Pager Preferences Properties panel.
  3. Click the Edit button at the bottom of the Properties panel. The Edit Pager Preferences page is displayed in the content panel.Alternately, you can right-click the Pager Recipients container in the left menu tree to display the container action menu and select Edit Defaults.
  4. Complete the items in the Main Settings section as described below.
  5. When the required settings are defined, click OK to save the Pager Preferences settings.

Main Settings

You use the Main Settings section of the Pager Preferences Properties page to connect to a pager service provider Pager Preferences settings. Complete the items for the Pager Preferences Properties as described below.

Modem Port

Use the drop-down list to select the communications port that your modem is connected to on the SiteScope server. For SiteScope on Solaris or Linux, enter the path and device name for the modem. On the Windows NT/2000 platform, SiteScope uses COM port numbers for both RS-232C type serial ports as well as for USB modem ports. If you are using a USB type modem, you can select the COM port associated with the USB port to have SiteScope use the USB modem. To find the COM port number for the USB modem, use the Settings->Network and Dial-up Connections menu and right-click on the modem you want to use. Select Properties to view the properties for the modem. The properties should show the COM port number that is associated to the modem.

Connection Speed

Use the drop-down list to select the modem speed used for connections to your paging service. The default of 1200 baud is likely to work with most paging systems.




Copyright 2006 Mercury Interactive Corporation