Dell OpenManage Server Update Utility Version 6.5 User's Guide
|
|
The Graphical User Interface (GUI) provides an interactive approach to perform comparisons and updates.
You can use the GUI to:
When you launch SUU by double-clicking suulauncher.exe, SUU scans your system to determine if a hardware or software update is required.
|
NOTE: If you are using SUU version 2.0.0 or later and a newer version of SUU is available, a warning message is displayed. You can either download the newer version from the support.dell.com or continue using the current version. |
If the components in your system do not meet the prerequisite conditions, SUU displays the list of hardware or software components whose prerequisite conditions are not met.
If the components in your system meet the prerequisite conditions, the Comparison Report is displayed.
The failure messages displayed due to failed components and their respective fixes are as shown below.
Prerequisite Failure Message:
Your system does not meet the required prerequisites for installing the Dell OpenManage software component. Therefore, the row for the software component is disabled in the Comparison Report. Click Continue to update the applicable hardware components.
Prerequisite Failure Message:
Your system does not meet the required prerequisites for some of the hardware component(s). Therefore, all the rows for the hardware component(s) are disabled in the Comparison Report. Click Continue to update the applicable Dell OpenManage software component.
Prerequisite Failure Message:
Your system does not meet the required prerequisites for some of the hardware component(s) and for installing the Dell OpenManage software component. Therefore, all the row(s) will be disabled in the Comparison Report.
When you launch Dell OpenManage Server Update Utility (SUU) in the GUI mode and the prerequisites check for the software component fails, you must install the Dell OpenManage component version 4.3 or later before proceeding with the upgrade, downgrade, or update of the components.
When you launch Dell OpenManage Server Update Utility (SUU) in the GUI mode and the prerequisites check for the hardware component fails, you must install the hardware prerequisites before proceeding with the upgrade, downgrade, or update of the components.
To install the hardware prerequisites:
|
NOTE: Set the boot order in your system BIOS such that the media drive is placed ahead of the system hard drive. |
Enter the result of your step here (optional).
|
NOTE: An additional reboot may be required to complete the prerequisite update. Do not remove the media until the information on the screen prompts you to do so. |
To create the prerequisites media:
This bootable media is the Prerequisites media.
SUU compares the component versions installed on your system with the component versions available in the repository and displays the results in a Comparison Report with criticality levels.
The Criticality column in the Comparison Report denotes the importance of applying the update.
For information on the criticality levels and their corresponding status, see Table 2-1.
You can view, sort or export the Comparison Report.
Table 2-2. Comparison Report Features
SUU compares the components installed on your system with the component versions available in the repository. If the system components are older than the repository version, SUU enables the Upgrade button on the upper right corner of the Comparison Report.
To upgrade repository components:
While upgrading the components, SUU displays an update report. After completion, SUU displays an Update Complete dialog box.
The status of the upgrade is reflected in the Comparison Report.
|
NOTE: When you perform an upgrade, SUU copies all the update packages into a temporary directory on the system: <%systemdrive%>:\dell\suu in case of Microsoft Windows operating system and /var/log/dell/suu in case of Linux operating systems. SUU deletes this temporary directory after the upgrade process is complete. If a reboot is required to complete the upgrade process, the directory is saved until the reboot process is complete. |
|
CAUTION: Do not remove the Dell Server Updates DVD from the DVD drive when you are running SUU. |
SUU compares the components installed on your system with the component versions available in the repository. If the system components are newer than the repository version, SUU enables the Enable Downgrade button on the upper right corner of the Comparison Report.
To downgrade repository components:
SUU disables Enable System Set Update and selects only those components that are newer than the repository version components that can be downgraded.
While downgrading the components, SUU displays an update report. After completion, SUU displays an Update Complete dialog box.
The status of the downgrade is reflected in the Comparison Report.
SUU compares the components installed on your system with the component versions available in the repository. If some system components are newer than the repository version and vice versa, SUU enables the Update button on the upper right corner of the Comparison Report.
To upgrade and downgrade components in a single session:
SUU disables Enable Downgrade and Upgrade changes to Update. All the components that can be updated are selected in the Comparison Report.
The Confirm Update dialog box with a list of components to be updated is displayed.
If you click Yes, SUU displays the Update dialog box that shows the progress of the update.
The status of the update is reflected in the Comparison Report.
While updating the system components, if a particular component fails to get updated, you can choose to continue or stop updating the other components.
If you select Stop on Update Failures, SUU does not update the other components when it encounters a failed update.
|
NOTE: Stop on Update Failures is enabled only if you have selected more than one component for an update. |
To run SUU from a network location and update components on multiple systems:
The components to be updated are displayed in the Comparison Report.
|
NOTE: To update all the components in a single session, select Enable System Set Update before clicking Update. |
If you click Yes, SUU displays the Update dialog box that shows the progress of the update/upgrade/downgrade.
The updates are reflected in the Comparison Report.