Back to Contents Page

About GUI Mode

Dell OpenManage Server Update Utility Version 6.4 User's Guide

  Performing Prerequisites Check

  Prerequisites Failure Messages

  Fixing the Software Prerequisite Failure

  Fixing the Hardware Prerequisite Failure

  Comparison Report

  Upgrading System Components

  Downgrading System Components

  Updating System Components

  Updating Failures

  Running SUU from a Network Location


The Graphical User Interface (GUI) provides an interactive approach to perform comparisons and updates.

You can use the GUI to:


Performing Prerequisites Check

When you launch SUU by double-clicking suulauncher.exe, SUU scans your system to determine if a hardware or software update is required.

NOTE: If you are using SUU version 2.0.0 or later and a newer version of SUU is available, a warning message is displayed. You can either download the newer version from the support.dell.com or continue using the current version.

If the components in your system do not meet the prerequisite conditions, SUU displays the list of hardware or software components whose prerequisite conditions are not met.

If the components in your system meet the prerequisite conditions, the Comparison Report is displayed.


Prerequisites Failure Messages

The failure messages displayed due to failed components and their respective fixes are as shown below.

Software Prerequisite Failure Message

Prerequisite Failure Message:

Your system does not meet the required prerequisites for installing the Dell OpenManage software component. Therefore, the row for the software component is disabled in the Comparison Report. Click Continue to update the applicable hardware components.

Hardware Prerequisite Failure Message

Prerequisite Failure Message:

Your system does not meet the required prerequisites for some of the hardware component(s). Therefore, all the rows for the hardware component(s) are disabled in the Comparison Report. Click Continue to update the applicable Dell OpenManage software component.

Software and Hardware Prerequisite Failure Message

Prerequisite Failure Message:

Your system does not meet the required prerequisites for some of the hardware component(s) and for installing the Dell OpenManage software component. Therefore, all the row(s) will be disabled in the Comparison Report.


Fixing the Software Prerequisite Failure

When you launch Dell OpenManage Server Update Utility (SUU) in the GUI mode and the prerequisites check for the software component fails, you must install the the Dell OpenManage component version 4.3 or later before proceeding with the upgrade, downgrade, or update of the components.


Fixing the Hardware Prerequisite Failure

When you launch Dell OpenManage Server Update Utility (SUU) in the GUI mode and the prerequisites check for the hardware component fails, you must install the hardware prerequisites before proceeding with the upgrade, downgrade, or update of the components.

To install the hardware prerequisites:

  1. Use the Prerequisites media to bring your system up to meet prerequisite levels.

NOTE: Set the boot order in your system BIOS such that the media drive is placed ahead of the system hard drive.

Enter the result of your step here (optional).

  1. Boot the system that fails to meet the prerequisites with the Prerequisites media.

NOTE: An additional reboot may be required to complete the prerequisite update. Do not remove the media until the information on the screen prompts you to do so.
  1. When prompted, replace the Prerequisites media with the Dell Server Updates media and reboot the system.

Creating a Prerequisites media

To create the prerequisites media:

  1. Go to support.dell.com.

  2. Under Support for Enterprise IT, click Start Here.

  3. Click Drivers & Downloads.

  4. In the Drivers and Downloads page, perform one of the following steps:

  5. In the Enter a service tag field, enter the service tag of your Dell system, click Go, and Proceed to step 9.

  6. From the Select Your Product Family list, select Servers, Storage, Networking.

  7. From the Select Your Product Line list, select PowerEdge Server.

  8. From the Select Your Product Model list, select your PowerEdge system, and click Confirm.

  9. From the Operating System and Driver Language drop-down lists, select the appropriate operating system and language for your system.

  10. From the Category drop-down list, select Systems Management.

  11. From the table of results displayed, click CD ISO - PowerEdge Updates Prerequisites v1.0 in the File Title(s) column.

  12. Click Download Now to save the PE Updates prereq cd.iso file on your system. Copy this file to a system that has a media-burning program and create a bootable media from the provided .iso file.

This bootable media is the Prerequisites media.


Comparison Report

SUU compares the component versions installed on your system with the component versions available in the repository and displays the results in a Comparison Report with criticality levels.

Criticality Levels

The Criticality column in the Comparison Report denotes the importance of applying the update.

For information on the criticality levels and their corresponding status, see Table 2-1.

Table 2-1. Crticality Levels

Crticality Level

Status

Urgent

The update contains changes to improve the reliability and availability of your Dell system.

It is recommended that you apply this update immediately.

Recommended

The update contains feature enhancements or changes that help keep your system software current and compatible with other system modules (firmware, BIOS, drivers, and software).

It is recommended that you apply this update during your next scheduled update cycle.

Optional

The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

It is recommended that you review the update specifications to determine if it applies to your system.

Inapplicable

The update is not applicable on your system. The component version on your system is the same as the repository version and hence, no update is required.

Comparison Report Features

You can view, sort or export the Comparison Report.

Table 2-2. Comparison Report Features

Tasks

Action

Viewing Report

To view the report, in the left pane, click your system's host name.

Sorting Columns

To sort columns, click the column names.

NOTE: The columns are sorted in the ascending or descending order.

Exporting Report

To export the report, click Export Report.

NOTE: You can save the the report in a .csv, .html, or .xml format on your system.

For a Windows operating system, ensure the name of the report or the path that you save the report does not exceed 260 characters.

For a Linux operating system, ensure the name of your report does not exceed 255 characters or the path that you save the report does not exceed 4096 characters.


Upgrading System Components

SUU compares the components installed on your system with the component versions available in the repository. If the system components are older than the repository version, SUU enables the Upgrade button on the upper right corner of the Comparison Report.

To upgrade repository components:

  1. Select the components that you want to upgrade.

  2. Click Upgrade to apply the components that you have selected.

  3. In the Confirm Update dialog box, click Yes to confirm and continue or No to cancel.

While upgrading the components, SUU displays an update report. After completion, SUU displays an Update Complete dialog box.

  1. Click OK.

The status of the upgrade is reflected in the Comparison Report.

NOTE: When you perform an upgrade, SUU copies all the update packages into a temporary directory on the system: <%systemdrive%>:\dell\suu in case of Microsoft Windows operating system and /var/log/dell/suu in case of Linux operating systems. SUU deletes this temporary directory after the upgrade process is complete. If a reboot is required to complete the upgrade process, the directory is saved until the reboot process is complete.
CAUTION: Do not remove the Dell Server Updates DVD from the DVD drive when you are running SUU.

Downgrading System Components

SUU compares the components installed on your system with the component versions available in the repository. If the system components are newer than the repository version, SUU enables the Enable Downgrade button on the upper right corner of the Comparison Report.

To downgrade repository components:

  1. Select Enable Downgrade.

SUU disables Enable System Set Update and selects only those components that are newer than the repository version components that can be downgraded.

  1. Select the components that you want to downgrade and click Downgrade.

  2. In the Confirm Update dialog box, click Yes to confirm and continue or No to cancel.

While downgrading the components, SUU displays an update report. After completion, SUU displays an Update Complete dialog box.

  1. Click OK.

The status of the downgrade is reflected in the Comparison Report.


Updating System Components

SUU compares the components installed on your system with the component versions available in the repository. If some system components are newer than the repository version and vice versa, SUU enables the Update button on the upper right corner of the Comparison Report.

To upgrade and downgrade components in a single session:

  1. Select Enable System Set Update .

SUU disables Enable Downgrade and Upgrade changes to Update. All the components that can be updated are selected in the Comparison Report.

  1. Click the Update button.

The Confirm Update dialog box with a list of components to be updated is displayed.

  1. Click Yes to proceed with the update or No to cancel the update.

If you click Yes, SUU displays the Update dialog box that shows the progress of the update.

  1. Click OK when the update is complete.

The status of the update is reflected in the Comparison Report.


Updating Failures

While updating the system components, if a particular componant fails to get updated, you can choose to continue or stop updating the other components.

If you select Stop on Update Failures, SUU does not update the other components when it encounters a failed update.

NOTE: Stop on Update Failures is enabled only if you have selected more than one component for an update.

Running SUU from a Network Location

To run SUU from a network location and update components on multiple systems:

  1. Access the system on the network on which SUU is installed.

  2. Double-click the .exe file to launch the SUU GUI.

The components to be updated are displayed in the Comparison Report.

  1. Click Update, Upgrade, or Downgrade.

NOTE: To update all the components in a single session, select Enable System Set Update before clicking Update.
  1. Click Yes to continue or No to cancel.

If you click Yes, SUU displays the Update dialog box that shows the progress of the update/upgrade/downgrade.

  1. Click OK when the update/upgrade/downgrade is complete.

The updates are reflected in the Comparison Report.


Back to Contents Page