###############################################################################
# The daemon_options file contains parameters that can be set to control
# the behavior of the various EMC Solutions Enabler daemons. Each daemon reads 
# this file as it starts and applies any settings within it that apply.
#
#
# CAUTION: These parameters are intended for experienced users.  In
# most scenarios, the default values used by the daemons will be sufficient.
#
# CAUTION: This file should be protected so that only authorized users can
# make changes to it.
#
# Lines in this file are allowed to have one of the following formats:
#
#    NAME           = VALUE             Set the parameter 'NAME' for all 
#                                       daemons that understand this parameter.
#
#    stororad:NAME  = VALUE             Set the parameter 'NAME' for only the
#                                       stororad daemon.
#
#    storora*:NAME  = VALUE             Set the parameter 'NAME' for all 
#                                       daemons whose name begins with 
#                                       storora. The asterisk (*) character is 
#                                       a wildcard, matching the remainder of 
#                                       a daemon's name.
#
# Option values that are very long can extend to the next line by placing
# a backslash at the very end of the line. For example:
#    stororad:NAME  = VALUE1 : VALUE2 : VALUE3 : \ 
#       VALUE4 : VALUE5
#
###############################################################################

###############################################################################
### Common daemon parameters
###
###     These common parameters apply to the core Solutions Enabler daemons:
###       storapid      [Base Daemon]
###       storgnsd      [GNS Daemon]
###       storrdfd      [RDF Daemon]
###       storevntd     [Event Daemon]
###       storstpd      [STP Daemon]
###       storwatchd    [Watchdog Daemon, UNIX only]
###       storsrvd      [SYMAPI Server Daemon]
###############################################################################
#
# Parameter:            AUTORESTART
#
# Allowed values:       enable | disable
#
# Default value:        enable 
#
# Description:          Specifies whether a watchdog mechanism 
#                       (UNIX: storwatchd daemon) should be used to 
#                       automatically restart a daemon if it crashes.
#
# stor????:AUTORESTART = disable
#------------------------------------------------------------------------------
#
# Parameter:            LOG_LEVEL 
#                                   
# Allowed values:       error | info | debug | verbose | warning 
#
# Default value:        warning
#
# Description:          Specifies a severity-based control over logging 
#                       volume. Messages that are issued with a severity 
#                       equal to or exceeding the level specified will be 
#                       recorded in the log file. Do not use debug or verbose 
#                       without direction from EMC Customer Support. 
#
# stor????:LOG_LEVEL = error 
#------------------------------------------------------------------------------
# Parameter:            LOGFILE_TYPE
#
# Allowed values:       dated | wrap 
#
# Default value:        wrap
#
# Description:          Specifies which style of log file the daemon will use.
#                       Two styles are supported:
#                       wrap: Two log files are maintained: stor????.log0 and
#                       and stor????.log1. Logging alternates between
#                       these--switching to the other file each time
#                       the maximum size specified by the LOGFILE_SIZE
#                       parameter is reached. The modified time on the
#                       files can be used to determine the current one.
#
#                       dated: A separate log file is used for each day:
#                       stor????-YYYYMMDD.log. (e.g.: storapid-20041130.log).
#                       There are no size limits on these files.
#
#                       Log files are written to the following directory:
#                       UNIX:     /var/symapi/log
#                       Windows:  c:\\Program Files\\EMC\\SYMAPI\\log
#
#                       The dated LOGFILE_TYPE is recommended for storstpd.
#
# stor????:LOGFILE_TYPE = dated
#------------------------------------------------------------------------------
#
# Parameter:            LOGFILE_SIZE
#
# Allowed values:       A number, in KB units
#
# Default value:        1000 (1000-KB)
#
# Description:          For LOGFILE_TYPE=wrap style log files, how large each
#                       log file is allowed to grow before wrapping to the
#                       alternate file.
#
# stor????:LOGFILE_SIZE = 5000
#------------------------------------------------------------------------------
#
# Parameter:            LOGFILE_RETENTION
#
# Allowed values:       A number of days, greater than zero.
#
# Default value:        3 (days)
#
# Description:          For LOGFILE_TYPE=dated style log files, log files
#                       more than this many days old will be automatically
#                       deleted.
#
# stor????:LOGFILE_RETENTION = 5
#------------------------------------------------------------------------------
#
# Parameter:            LOGFILE_PERMS
#
# Allowed values:       r | n | rw
#
# Default value:        rw
#
# Description:          By default, daemon log files allow anyone to read or 
#                       write them (UNIX mode of rwxrwxrwx). This option can 
#                       be set to override that behavior, as follows:
#
#                       rw: Anyone can read or write (default).
#                       r: The owner (root) can read/write, others can read.
#                       n: The owner can read/write, no one else can access.
#
# stor????:LOGFILE_PERMS = r
#------------------------------------------------------------------------------
#
# Parameter:            SECURE_DIRECTORY_PATH
#
# Allowed values:       One or more semicolon (On non-Window platforms a
#                       colon can be used instead) separated directories.   
#  
# Default value:        None
#
# Description:          Controls which directories the daemon is permitted
#                       to read from, write arbitrary files to, or execute a
#                       script from as directed to by SE applications.
#                       
#                       For example, this applies to backup/restore and script
#                       files that storsrvd can be asked to read, write or
#                       execute.
#
#                       On Windows, this is a list of directories separated by
#                       a semicolon, ';'.  Also, either forward or back slashes
#                       ('/','\') can be used when specifying the directory
#                        name. For example:
#
#                       storsrvd:secure_directory_path = c:\Temp\dir1;c:/Users/SE
#
#                       On non-Windows platforms, this is a list of directories
#                       separated by a semicolon, ';', or colon, ':'. Also,
#                       only a forward slash ('/') can be used when specifying
#                       the directory name. For example:
#                       
#                       storsrvd:secure_directory_path = /tmp/dir1;/opt/dir2;/users/se
#                       If this parameter is not set any directory can be used.
#
# stor????:SECURE_DIRECTORY_PATH  = /tmp/dir1;/opt/dir2;/users/se
#
#------------------------------------------------------------------------------
#
# Parameter:            IBMI_JOBQ_NAME
#                                   
# Allowed values:       Any name of 10 characters long.
#
# Default value:        *JOBD
#
# Description:          Specifies the job queue in which this job is placed.
#                       
#                       *JOBD: The submitted job is placed on the job queue named
#                              in the specified job description.
#                       name : Specify the name of the job queue
#
#
# stor????:IBMI_JOBQ_NAME
#------------------------------------------------------------------------------
#
# Parameter:            IBMI_JOBQ_LIB_NAME
#                                   
# Allowed values:       Any name of 10 characters long.
#
# Default value:        *LIBL
#
# Description:          Specifies the library in which the job queue is located.
#
#                       *LIBL  : All libraries in the library list for the current 
#                                thread are searched until the first match is found.
#                       *CURLIB: The current library for the thread is used to 
#                                locate the job, queue.  If no library is specified
#                                as the current library for the thread, the QGPL 
#                                library is used.,
#                       name   : Specify the name of the library where the job queue
#                                is located.
#
# stor????:IBMI_JOBQ_LIB_NAME
#------------------------------------------------------------------------------
#
# Parameter:            IBMI_ALLOW_SUBSYSTEM_START
#                                   
# Allowed values:       yes | no
#
# Default value:        yes
#
# Description:          Specifies whether or not it is allowed to automatically start 
#                       the subsystem specified in the jobq that defined by the 
#                       daemon options IBMI_JOBQ_NAME and IBMI_JOBQ-LIB_NAME.
#                       When set to yes the subsystem defined in jobq above will be 
#                       started. When the jobq name is set to *libl the subsystem and
#                       jobq will need to be located in a library that is in the library 
#                       list or otherwise the subsystem cannot be started.
#
# stor????:IBMI_ALLOW_SUBSYTEM_START = yes
###############################################################################

###############################################################################
### storsrvd [SYMAPI server daemon] parameters
###
###     This daemon handles remote SYMAPI client connections over TCP/IP 
###     to storage arrays.  Storsrvd provides the same services as the former
###     symapisrv command. 
###     Refer to the storsrvd(3) man page for additional details.
###############################################################################
#
# Parameter:            LOG_FILTER
#
# Allowed values:       SERVER | CONTROLS | SESSION | APIREQ
#
# Default value:        None
#
# Description:          Specifies category-based control over logging volume, 
#                       by selecting which types of storsrvd numbered log 
#                       messages are recorded in the storsrvd log files. 
#                       Each log message issued by storsrvd is associated with
#                       a category, expressed by the filter names shown below. 
#  
#                       The numbered messages will appear in the storsrvd log
#                       files and on a terminal if one is available. Numbered 
#                       messages issued by storsrvd use a message identifier 
#                       that precedes the message text: 
#
#                       ANR0001I SYMAPI server ready to accept SECURE 
#                       connections.
# 
#                       The value to be specified for LOG_FILTER consists of a 
#                       series of keywords separated by a commas (,) or 
#                       plus signs {+). 
#
#                       SERVER: Records high level events of the server:
#                               initialization, termination, and other 
#                               events not directly related to a SYMAPI 
#                               session. 
#                       SESSION: Records arrival and termination of SYMAPI 
#                                sessions. 
#                       APIREQ:  Records arrival and completion  of SYMAPI
#                                function requests. 
#                       CONTROLS: Records activity during execution of  
#                                management requests from stordaemon or the 
#                                system console in the z/OS environment. 
# 
#                       If LOG_FILTER specifies either SESSION or APIREQ
#                       it is most useful to set LOG_LEVEL to info. 
#
# storsrvd:LOG_FILTER = SESSION+APIREQ 
#------------------------------------------------------------------------------
#
# Parameter:            LOG_SHOW_MSGID 
#
# Allowed values:       disable | enable
#
# Default value:        enable 
#
# Description:          Displays message identifiers in the log messages 
#                       issued by storsrvd. 
#
# storsrvd:LOG_SHOW_MSGID = enable 
#------------------------------------------------------------------------------
#
# Parameter:            LOG_SHOW_CATEGORY 
#
# Allowed values:       enable | disable
#
# Default value:        disable 
#
# Description:          Displays the category (see LOG_FILTER above) in the
#                       output log messages, preceding the message identifier. 
#
# storsrvd:LOG_SHOW_CATEGORY = disable 
#------------------------------------------------------------------------------
#
# Parameter:            PORT 
#
# Allowed values:       1 - 65534 | 2707 
#
# Default value:        2707
#
# Description:          Specifies the TCP/IP port on which storsrvd will
#                       listen for connections from remote SYMAPI clients.
#                       Generally, numbers less than 1000 are reserved for 
#                       well known daemon servers such as telnet, ftp, and 
#                       http. 
#                                   
#                       If this parameter is changed, the storsrvd must be
#                       restarted for the new value to take effect.
#
# storsrvd:PORT  = 2707
#------------------------------------------------------------------------------
#
# Parameter:            SECURITY_ALT_CERT_FILE
#
# Allowed values:       Any valid simple file name.
# 
# Default value:        symapisrv_cert.pem
# 
# Description:          Specifies the name of an alternate certificate file
#                       to be used by the server instead of the certificate
#                       generated at installation, and will be paired with
#                       the file specified in the SECURITY_ALT_KEY_FILE option.
#
#                       If this option is used, the SECURITY_ALT_KEY_FILE
#                       option must also be used to specify an alternate key 
#                       file.  
# 
#                       The certificate file must be located in the 
#                       /var/symapi/config/cert directory. Do not specify
#                       the directory in the value. 
#
#                       If this parameter is changed, the storsrvd must be
#                       restarted for the new value to take effect.
#
# storsrvd:SECURITY_ALT_CERT_FILE  = symapisrv_cert_v8.0.pem
#------------------------------------------------------------------------------
#
# Parameter:            SECURITY_ALT_KEY_FILE
#
# Allowed values:       Any valid simple file name.
# 
# Default value:        symapisrv_key.pem
#
# Description:          Alternate key file.
#                                   
#                       Specifies the name of an alternate private key file
#                       to be used by the server instead of the key
#                       generated at installation, and will be paired with the
#                       file specified in the SECURITY_ALT_CERT_FILE option.
#
#                       If this option is used, the SECURITY_ALT_CERT_FILE
#                       option must also be used to specify an alternate 
#                       certificate file.  
# 
#                       The key file  must be located in the
#                       /var/symapi/config/cert directory. Do not specify
#                       the directory in the value. 
#
#                       If this parameter is changed, the storsrvd must be
#                       restarted for the new value to take effect.
#
# storsrvd:SECURITY_ALT_KEY_FILE  = symapisrv_key_v8.0.pem
#------------------------------------------------------------------------------
#
# Parameter:            SECURITY_CLT_SECURE_LVL
#
# Allowed values:       MUSTVERIFY | NOVERIFY | VERIFY 
#  
# Default value:        VERIFY
#
# Description:          Client certificate verification level.
#                       (This feature is not available on z/OS).
#
#                       This option controls the verification 
#                       of the client certificate by the server. 
#                       The following values may be specified:
#
#                       MUSTVERIFY: Indicates that the server
#                       will only accept communications from a
#                       version of the client that can send a
#                       certificate to be verified.
#
#                       NOVERIFY: Indicates that the server
#                       will not verify the client certificate.
#
#                       VERIFY: Indicates that the server will
#                       verify a client certificate if the version
#                       of the client can send a certificate.
#
#                       THIS OPTION IS IGNORED IF SECURE
#                       COMMUNICATIONS ARE NOT ESTABLISHED.
#
# storsrvd:SECURITY_CLT_SECURE_LVL  = VERIFY
#------------------------------------------------------------------------------
#
# Parameter:            MAX_SESSIONS
#
# Allowed values:       0 - 100
#  
# Default value:        100
#
# Description:          Maximum SYMAPI sessions to the server
#
#                       This option will take precedence over the options file
#                       option SYMAPI_MAX_CLIENTS.  This specifies the global
#                       high-water mark of all sessions allowed by the server,
#                       without respect to source host or user.  When the next
#                       new session will cause the current number of sessions
#                       to exceed this number, it will be refused.
#
#                       This parameter can be changed and reloaded while the 
#                       server is running with the CLI 
#                       stordaemon action storsrvd -cmd reload.
#
# storsrvd:MAX_SESSIONS  = 100
#------------------------------------------------------------------------------
#
# Parameter:            MAX_SESSIONS_PER_HOST
#
# Allowed values:       A positive number | NOLIMIT
#  
# Default value:        NOLIMIT
#
# Description:          Maximum SYMAPI sessions per host to the server
#
#                       This option specifies the high-water mark for 
#                       concurrent sessions from any specific host.  When the
#                       next new session from the source host will cause the
#                       current number of sessions from that host to exceed
#                       this number, the session will be refused.  
#                     
#                       When setting a numeric value, it should be <= the
#                       MAX_SESSIONS value. If it is set greater than 
#                       MAX_SESSIONS, then the maximum number of sessions for
#                       any specific host will be restricted to MAX_SESSIONS.
#
#                       If the value is set to NOLIMIT, then host sessions are
#                       only restricted by the MAX_SESSIONS value.
#
#                       This parameter can be changed and reloaded while the 
#                       server is running with the CLI 
#                       stordaemon action storsrvd -cmd reload.
#
# storsrvd:MAX_SESSIONS_PER_HOST  = NOLIMIT
#------------------------------------------------------------------------------
#
# Parameter:            MAX_SESSIONS_PER_USER
#
# Allowed values:       A positive number | NOLIMIT
#  
# Default value:        NOLIMIT
#
# Description:          Maximum SYMAPI sessions per user to the server
#
#                       This option specifies the high-water mark for 
#                       concurrent sessions from any specific user.  When the
#                       next new session from the source user will cause the
#                       current number of sessions from that user to exceed
#                       this number, the session will be refused.  
#                     
#                       When setting a numeric value, it should be <= the
#                       MAX_SESSIONS value. If it is set greater than 
#                       MAX_SESSIONS, then the maximum number of sessions for
#                       any specific user will be restricted to MAX_SESSIONS.
#
#                       If the value is set to NOLIMIT, then user sessions are
#                       only restricted by the MAX_SESSIONS value.
#
#                       This parameter can be changed and reloaded while the 
#                       server is running with the CLI 
#                       stordaemon action storsrvd -cmd reload.
#
# storsrvd:MAX_SESSIONS_PER_USER  = NOLIMIT
#------------------------------------------------------------------------------
#
# Parameter:           PERMIT_SYMAPI_DEBUG
#
# Meaning:             control whether SYMAPI debug logs can be created by
#                      clients, server, or not at all.
#                      When the value is 'none', debug logging is suspended,
#                      regardless of the settings of commonly used debug flags
#                      configuration.
#                      When the value is 'server', the server's debugging 
#                      configuration will be in effect, but settings from
#                      clients are ignored.
#                      When the value is 'client', settings sent to the server
#                      from the client are respected. 
#
# Allowed Values:      none | client | server
#
# Default Value        server
#
# storsrvd:PERMIT_SYMAPI_DEBUG = server 
#------------------------------------------------------------------------------
#
# Parameter:           SECURITY_CERT_ALLOW_WILDCARDS
#
#
# Allowed values:       ENABLE | DISABLE
#
# Default value:        DISABLE
#
# Description:          Specifies if wildcards are allowed in the Common Name
#                       of a client certificate.
#                       The following values may be specified:
#
#                       ENABLE: Indicates that the server will accept wildcards
#                       in the Common Name of a client certificate.
#
#                       DISABLE: Indicates that the server will reject any host
#                       with wildcards in the Common Name of a client
#                       certificate.
#
# storsrvd:SECURITY_CERT_ALLOW_WILDCARDS  = disable
###############################################################################

###############################################################################
### storapid [Base Daemon] parameters
###
###     This daemon facilitates I/O accesses to Symmetrix storage arrays.
###     Refer to the storapid(3) man page for additional details.
###############################################################################
#
# Parameter:            USE_ALL_GKS
#
# Allowed values:       disable | enable
#
# Default value:        enable
#
# Description:          Specifies whether or not the storapid is free to use
#                       all available gatekeepers, if the syscall volume is
#                       high enough. When disabled, the storapid restricts 
#                       itself to using no more than 75% of the available
#                       gatekeepers. 
#
#                       If this parameter is changed, the storapid must be
#                       restarted for the new value to take effect.
#
# storapid:USE_ALL_GKS = disable
#------------------------------------------------------------------------------
#
# Parameter:            GK_USE
#
# Allowed values:       dedicated_only | legacy
#
# Default value:        legacy
#
# Description:          
#                       If set to 'dedicated_only', then the base daemon
#                       restricts itself to using only dedicated gatekeepers. 
#                       This ensures that data devices will never be used as 
#                       gatekeepers without the need to maintain the gkselect
#                       or gkavoid file. Note, even though VCM/ACLX devices 
#                       can be used as gatekeepers, they are not classified
#                       as dedicated gatekeepers.
# 
#                       If set to 'legacy', then the base daemon may 
#                       temporarily use a data device as a gatekeeper if the 
#                       syscall load is high enough.
#
#                       This parameter can be changed and reloaded while the 
#                       base daemon is running with the CLI stordaemon
#                       action storapid -cmd reload.
#
# storapid:GK_USE = dedicated_only
#------------------------------------------------------------------------------
#
# Parameter:            INQUIRY_TIMEOUT
#
# Allowed values:       A number of seconds.
#
# Default value:        900
#
# Description:          Specifies how long priority inquiry results are to   
#                       remain in memory before expiring, and new data is  
#                       retrieved from the host and arrays. 
#
#                       A value of -1 indicates the data never expires. 
#                       A value of zero indicates the data always expires.
#
# storapid:INQUIRY_TIMEOUT  = 900
#------------------------------------------------------------------------------
#
# Parameter:            BACKGROUND_AUDIT_LOG
#
# Allowed values:       disable | enable
#
# Default value:        disable 
#
# Description:          Writes audit log entries on behalf of the requesting 
#                       client, and returns control back to the client while 
#                       the entry is being written.
#                                   
#                       An audit log entry is preserved on disk until the
#                       entry is written to the Symmetrix array. This ensures
#                       no entries are lost if the base daemon is stopped and
#                       restarted before all entries are written.
#
#                       This parameter can be changed and reloaded while the 
#                       base daemon is running with the CLI stordaemon
#                       action storapid -cmd reload.
#
# storapid:BACKGROUND_AUDIT_LOG = enable
#------------------------------------------------------------------------------
#
# Parameter:            SINGLE_GK_POLICY
#
# Allowed values:       pool | close
#
# Default value:        close
#
# Description:          If the base daemon only has one gatekeeper device,
#                       this parameter tells the base daemon what to do 
#                       with the device after each use.
#
#                       A value of pool tells the daemon to put it back
#                       into the gatekeeper pool.
#
#                       A value of close tells the daemon to close the 
#                       device after each use.
#                       This parameter is useful for device masking on
#                       hosts that only see a single device. Setting
#                       the value to close will slow down all commands,
#                       so it is recommended that this setting only be
#                       used for as short a time as possible.
#
#                       An example of how to use this setting follows:
#
#                       1.  Edit the daemon_options file and add:
#                           storapid:SINGLE_GK_POLICY = close
#
#                       2.  Reload storapid settings with this command:
#                           stordaemon action storapid -cmd reload
#
#                       3.  Perform all the device masking commands.
#
#                       4.  Edit the daemon_options file and set:
#                           storapid:SINGLE_GK_POLICY = pool
#
#                       5.  Reload the storapid settings.
#
#                       6.  Verify that the setting is back to pool:
#                           stordaemon action storapid -cmd show_gk_stats
#
# storapid:SINGLE_GK_POLICY = pool
#------------------------------------------------------------------------------
#
# Parameter:            INTERNODE_LOCK_INFORMATION_EXPORT
#
# Allowed values:       disable | enable
#
# Default value:        enable 
#
# Description:          Makes SEL and DEL lock information available for all  
#                       base daemon hosts attached to the Symmetrix array for  
#                       use with available LockShow API functions.
#
#                       This parameter can be changed and reloaded  
#                       while the base daemon is running with the
#                       CLI stordaemon action storapid -cmd reload.
#
# storapid:INTERNODE_LOCK_INFORMATION_EXPORT = enable
#------------------------------------------------------------------------------
# Parameter:            PARALLEL_INQUIRY_SIZE
#
# Allowed Values:       0, multiples of 2
#
# Default Value:        6
#
# Description:          Indicates the number of threads to use when the base
#                       daemon is performing an inquiry. The device list is
#                       scattered across those threads to potentially improve
#                       performance. Devices that fail to respond within the
#                       DEVICE_INQUIRY_TIMEOUT period get abandoned, with
#                       inquiry data not provided to the requesting API client
#                       for those devices. 
#                                   
#                       A value of zero keeps the inquiry process as a
#                       single list, executed on the calling client's thread.
# 
#                       To help determine the optimal setting for the host use
#                       the CLI stordaemon action storapid -cmd scan -inquiry
#
#                       This parameter can be changed and reloaded  
#                       while the base daemon is running, with the
#                       CLI stordaemon action storapid -cmd reload.
#                                   
#                       This value can be viewed and set with the CLI
#                       stordaemon getvar and setvar commands.
#
# storapid:PARALLEL_INQUIRY_SIZE  = 6
#------------------------------------------------------------------------------
#
# Parameter:            DEVICE_INQUIRY_TIMEOUT
#
# Allowed values:       A number of seconds, >= 1
#
# Default value         60
#
# Description:          Specifies how long a thread in the parallel inquiry 
#                       feature waits for a device to respond before abandoning
#                       it during the inquiry process. The thread may or may 
#                       not complete, depending on why the device is not 
#                       responding. If a device is eventually made to respond 
#                       by other means and the nature of the OS does not 
#                       provide any indication to the waiting request in the 
#                       base daemon, the base daemon will need to be restarted.
#                                   
#                       This parameter can be changed and reloaded  
#                       while the base daemon is running, with the
#                       CLI stordaemon action storapid -cmd reload.
#                                   
#                       This value can be viewed and set with the CLI
#                       stordaemon getvar and setvar commands.
#
# storapid:DEVICE_INQUIRY_TIMEOUT = 60
#------------------------------------------------------------------------------
#
# Parameter:            BACKGROUND_DISCOVERY
#
# Allowed values:       disable | enable
#
# Default value:        enable 
#
# Description:          Performs a discovery of select syscall data on behalf
#                       of the requesting API client that initiated a 
#                       discovery. These syscalls are issued in parallel with 
#                       other syscalls being issued by the client.
#                                   
#                       Syscall data is kept in cache until the client requests
#                       the data, and then is discarded.
#
#                       This parameter can be changed and reloaded  
#                       while the base daemon is running, with the
#                       CLI stordaemon action storapid -cmd reload.
#
# storapid:BACKGROUND_DISCOVERY = disable
#
###############################################################################
#
###############################################################################
### storgnsd [Group Name Service (GNS) Daemon] notes
###
###     This daemon supports GNS (Group Name Services) on a host.
###     Refer to the storgnsd(3) man page for additional details.
###############################################################################
#
# Parameter:            AUTORESTART
#
# Allowed values:       disable | enable 
#
# Default value:        enable  
#
# Description:          Specifies whether to use a watchdog mechanism to 
#                       monitor and automatically restart storgnsd if it 
#                       crashes.
#
# storgnsd:AUTORESTART = disable
#------------------------------------------------------------------------------
#
# Parameter:            GNS_DEVICE_POLL_INTERVAL
#
# Allowed values:       A number, in seconds.
#
# Default value:        15
#
# Description:          Specifies how frequently storgnsd polls for changes
#                       made to groups from other hosts. The smaller this
#                       value is, the more quickly a host will recognize
#                       group changes made from other hosts.
#
# storgnsd:GNS_DEVICE_POLL_INTERVAL  = 60
#------------------------------------------------------------------------------
#
# Parameter:            GNS_PPATH_POLL_INTERVAL
#
# Allowed values:       A number, in seconds.
#
# Default value:        60
#
# Description:          Specifies how frequently storgnsd checks to see whether
#                       PowerPath or RDF consistency group updates are 
#                       necessary.
#
# storgnsd:GNS_PPATH_POLL_INTERVAL  = 30
#------------------------------------------------------------------------------
#
# Parameter:            GNS_REMOTE_MIRROR
#
# Allowed values:       enable | disable
#
# Default value:        disable  
#
# Description:          Specifies whether storgnsd should automatically mirror 
#                       RDF1 and RDF2 type DG and CG group definitions for
#                       use on remote (SRDF) Symmetrix arrays.
#
#                       Limitations include:
#                       - REGULAR type and type ANY groups are not mirrored.
#                       - Mirrors will not be created if the remote
#                         Symmetrix array is also directly attached to
#                         the local host. (Refer to the GNS_SYMAVOID_LOCAL
#                         option below.)
#                       - For CG groups, BCV type devices are not mirrored.
#
# storgnsd:GNS_REMOTE_MIRROR  = enable
#------------------------------------------------------------------------------
#
# Parameter:            GNS_RMTARR_UPDATE_INTERVAL
#
# Allowed values:       A number, in seconds.
#
# Default value:        60
#
# Description:          Specifies how frequently storgnsd should attempt to 
#                       propagate device groups over to remote (SRDF)  
#                       Symmetrix arrays.  This is only relevant if the 
#                       GNS_REMOTE_MIRROR option is set to enable.   
#
# storgnsd:GNS_RMTARR_UPDATE_INTERVAL  = 30
#------------------------------------------------------------------------------
#
# Parameter:            GNS_DB_BACKUP
#                 
# Allowed values:       enable | disable
#
# Default value:        enable  
#
# Description:          Specifies whether storgnsd should automatically backup 
#                       both GNS databases for local and global groups.  
#                       These backups, maintained on the local disk, can be used 
#                       to restore local GNS group repository and GNS group repository on a 
#                       Symmetrix array.
#
#                       It is recommended that this option be enabled on a 
#                       subset of hosts running GNS daemons. Because of its 
#                       effect on performance, it usually does not make sense 
#                       to have more than 2-4 GNS daemons managing these 
#                       backup copies--assuming that they can see all the 
#                       relevant Symmetrix arrays.
#                 
# storgnsd:GNS_DB_BACKUP  = enable
#------------------------------------------------------------------------------
#
# Parameter:            GNS_DB_BACKUP_INTERVAL
#
# Allowed values:       A number, in hours.
#
# Default value:        24
#
# Description:          Specifies how frequently storgnsd should attempt to 
#                       perform GNS databases backup for both local and global groups.  
#                       This is only relevant if the 
#                       GNS_DB_BACKUP option is set to enable.   
#
# storgnsd:GNS_DB_BACKUP_INTERVAL  = 24
#------------------------------------------------------------------------------
#
# Parameter:            GNS_SYMAVOID
#
# Allowed values:       A comma separated list of Symmetrix IDs.  Note that
#                       full IDs are required - shortcuts are not supported.
#
# Default value:        None
#
# Description:          Specifies a set of Symmetrix arrays, both local and
#                       (SRDF) remote, that GNS should NOT manage.  
#                       Specifically, GNS will not examine these
#                       arrays for group definitions and will fail if an
#                       attempt is made to define a group containing devices
#                       on one of these.  Also, mirroring of groups will not
#                       occur to remote Symmetrix arrays if they are in this
#                       list.
#
# storgnsd:GNS_SYMAVOID = 000012345678,000012345679
#------------------------------------------------------------------------------
#
# Parameter:            GNS_SYMINCLUDE
#
# Allowed values:       A comma separated list of Symmetrix IDs.  Note that
#                       full IDs are required; shortcuts are not supported.
#
# Default value:        None
#
# Description:          Specifies the only Symmetrix arrays, both local and 
#                       (SRDF) remote, that GNS will manage. Specifically,
#                       GNS will only examine these arrays (and no others)
#                       for group definitions and will only allow groups
#                       to be defined that contain devices on one of these.
#                       Also, mirroring of groups will not occur to remote 
#                       Symmetrix arrays if they are NOT in this list.
#                                   
#                       If both GNS_SYMAVOID and GNS_SYMINCLUDE are supplied, 
#                       the effect is cumulative. Only arrays specified by 
#                       GNS_SYMINCLUDE but not in GNS_SYMAVOID will be managed.
# 
# storgnsd:GNS_SYMINCLUDE = 000012345678,000012345679
#------------------------------------------------------------------------------
#
# Parameter:            GNS_SYMAVOID_LOCAL
#
# Allowed values:       A comma separated list of Symmetrix IDs. Note that
#                       full IDs are required; shortcuts are not supported.
#
# Default value:        None
#
# Description:          Specifies a set of local Symmetrix arrays that GNS
#                       should NOT manage. Specifically, if an array listed
#                       here can be accessed both locally and remotely
#                       (by RDF) from this host, the local connection will be
#                       ignored. This can be used to enable automatic group
#                       mirroring where the remote array is also local to the
#                       host (refer to the gns_remote_mirror option above).
#
# storgnsd:GNS_SYMAVOID_LOCAL  = 000012345678,000012345679
#
###############################################################################
#
###############################################################################
### storrdfd [RDF Daemon] notes
###
###     This daemon provides consistency for SRDF/A MSC and RDF-ECA CGs in
###     multi-Symmetrix array environments.
###     Refer to the storrdfd(3) man page for additional details.
###############################################################################
#
###############################################################################
### storevntd [Event Daemon] notes
###
###     This daemon acts as the clearing house for Solutions Enabler events
###     on a host.
###     Refer to the storevntd(3) man page for additional details.
###############################################################################
#
# Parameter:            SYMM_POLL_INTERVAL
#
# Allowed values:       A number of seconds.
#
# Default value:        60
#
# Description:          Specifies how often, in seconds, to poll Symmetrix 
#                       arrays for events that need to be delivered.
#
# storevntd:SYMM_POLL_INTERVAL = 300
#------------------------------------------------------------------------------
#
# Parameter:            EVENT_LISTEN_PORT
#
# Allowed values:       An IP port number.
#
# Default value:        0 - means to let the OS pick an unused port
# 
# Description:          Which IP port to use when listening for events being
#                       forwarded from remote hosts. By default, an unused
#                       port picked by the OS is used. This option might
#                       be needed if the presence of a firewall requires
#                       the use of a particular port.
#
# storevntd:EVENT_LISTEN_PORT = 2222
#------------------------------------------------------------------------------
#
# Parameter:            LOG_EVENT_TARGETS
#                                   
# Allowed values:       One or more (space separated) of: snmp, file, system, 
#                       syslog
#
# Default value:        none
#
# Description:          Controls whether events should be automatically logged.
#                       One or more of the following may be supplied:
#                       file: Events are written to a file on disk.
#                       snmp: Events are mapped into SNMP traps.
#                       system: Events are written to the Event Log (Windows) 
#                               or the local syslog service (otherwise).
#                       syslog: Events are sent directly to a remote syslog
#                               server, bypassing any local syslog service.
#
#                       Some of these possible targets can be configured by
#                       options that are described below.
#
# storevntd:LOG_EVENT_TARGETS = snmp file
#------------------------------------------------------------------------------
#
# Parameter:            LOG_SYMMETRIX_EVENTS
#
# Allowed values:       see above
#
# Default value:        No events are logged.
#
# Description:          Specifies events that are to be automatically logged.
#                       Refer to the LOG_EVENT_TARGETS option above.
#                       This option consists of a records separated by a 
#                       semicolon. Typically, each record will be placed on a 
#                       line by itself. Each of these records in turn consists 
#                       of a number of comma-separated fields.
#
#                       [sid=nnnnn,] CAT[, ...] [,ignore] [,tgt=xxx]
#
#                       sid=nnnnnnnnnnnn
#                       Specifies a Symmetrix ID. By default, all known
#                       Symmetrix arrays will be monitored.
#                       
#                       CAT          
#                       Specifies the event(s) to be monitored. This can
#                       be either the name of an event category or a
#                       numerical event ID. This is the only field that is
#                       required. One or more values (comma separated)
#                       may be present.
#
#                       Supported categories are:
#                       status
#                       events
#                       array subsystem
#                       checksum
#                       diagnostic
#                       environmental
#                       device pool
#                       service processor
#                       srdf system
#                       srdf link
#                       srdfa session
#                       srdf consistency group
#                       director
#                       device
#                       disk
#
#                       comp=xxxx
#                       "comp=aaa,bbb,ccc"
#                       Certain events apply to specific sub-components
#                       within the array: a device (5 digit hexadecimal),
#                       disk, pool. This field specifies that only
#                       events for the specified component (or components)
#                       should be delivered. If more than one component
#                       is being present, the entire field must be enclosed
#                       in double quotes. e.g., "comp=00004,00010,00100"
#
#                       thresh_critical=nn
#                       thresh_major=nn (equivalent to:  thresh=nn)
#                       thresh_warn=nn
#                       thresh_info=nn
#                       Certain events correspond to numerical quantities
#                       of some sort. A threshold is associated with
#                       each severity level, and an event is generated
#                       at that severity when the event's value exceeds
#                       the associated threshold. These fields can be
#                       used to override the default threshold values
#                       controlling when an event is delivered.
#
#                       One example of this is the event that indicates the 
#                       percentage of space used for a pool. These fields
#                       can be set to control when events are to be generated.
#                       e.g.: thresh_critical=96, thresh_major=80, 
#                       thresh_warn=60
# 
#                       ignore
#                       If present, these event(s) are not to be logged, 
#                       even if they are matched by a different record.
#                       tgt=xxx
#                       If present, these event(s) are sent to only the
#                       specified target, which must be one of:
#                       snmp, file, system, syslog.
#                       The specified target must also be present in the
#                       default target list given by the LOG_EVENT_TARGETS
#                       option.
#
# storevntd:LOG_SYMMETRIX_EVENTS = sid=111111111111, disk, device ;\
#                       sid=222222222222, device pool ;\
#                       sid=333333333333, device, "comp=00101,00102,00104" ;\
#                       array subsystem , tgt=file
#------------------------------------------------------------------------------
#
# Parameter:            LOG_EVENT_FILE_NAME
#
# Allowed values:       file name, without any suffix
#
# Default value:        events
#
# Description:          For event logging to a file (LOG_EVENT_TARGETS 
#                       contains 'file'): the base name of the file that is 
#                       used. This file is created within the standard log 
#                       file directory.
#                       UNIX:     /var/symapi/log
#                       Windows:  c:\\Program Files\\EMC\\SYMAPI\\log
#                       Depending on the setting of the LOG_EVENT_FILE_TYPE 
#                       option, a suffix will added to this name.
#
# storevntd:LOG_EVENT_FILE_NAME = my_event_file
#------------------------------------------------------------------------------
#
# Parameter:            LOG_EVENT_FILE_TYPE
#
# Allowed values:       dated | wrap 
#
# Default value:         wrap
#
# Description:          For event logging to a file 
#                       (LOG_EVENT_TARGETS contains 'file'):
#                       the type of log file that is used.  
#                       Two styles are supported:
#
#                       wrap: Two log files are maintained: ????.log0 and
#                       and ????.log1. Logging alternates between
#                       these--switching to the other file each time
#                       the maximum size specified by the LOG_EVENT_FILE_SIZE
#                       parameter is reached. The modified time on the
#                       files can be used to determine the "current" one.
#
#                       dated: A separate log file is used for each day:
#                       ????-YYYYMMDD.log. (e.g., events-200411)
#                       There are no limits on how large these files
#                       can become.
#
# storevntd:LOG_EVENT_FILE_TYPE = dated
#------------------------------------------------------------------------------
#
# Parameter:            LOG_EVENT_FILE_SIZE
#
# Allowed values:       A number, in KB 
#
# Default value:        1000 (1000-KB)
#
# Description:          Specifies how large each log file is allowed to grow
#                       before wrapping to the alternate file.
#                       This option is for event logging to a file 
#                       (LOG_EVENT_TARGETS contains 'file'): 
#                       if LOG_EVENT_FILE_TYPE == wrap.
#
# storevntd:LOG_EVENT_FILE_SIZE = 5000
#------------------------------------------------------------------------------
#
# Parameter:            LOG_EVENT_FILE_RETENTION
#
# Allowed values:       A number of days, greater than zero.
#
# Default value:        3 (days)
#
# Description:          Indicates that log files more than this many days old
#                       will be automatically deleted.
#                       This option is for event logging to a file 
#                       (LOG_EVENT_TARGETS contains 'file'): 
#                       if LOG_EVENT_FILE_TYPE == dated. 
#
# storevntd:LOG_EVENT_FILE_RETENTION = 5
#------------------------------------------------------------------------------
#
# Parameter:            LOG_EVENT_FILE_PERMS
#
# Allowed values:       n | rw | r
#
# Default value:        r
#
# Description:          Specifies the permissions to be applied to 
#                       new log files that are created. 
#                       This option is for event logging to a file  
#                       (LOG_EVENT_TARGETS contains 'file'). Possible values:  
#
#                       rw: Anyone can read or write.
#                        r: The owner (root) can read/write, others can read.
#                        n: The owner can read/write, no one else can access.
#
# storevntd:LOG_EVENT_FILE_PERMS = r
#------------------------------------------------------------------------------
#
# Parameter:            LOG_EVENT_SYSLOG_HOST
# 
# Allowed values:       A host name or IP address.
#
# Default value:        None - a value is required.
#
# Description:          Specifies the host on which the remote syslog server 
#                       is running. This option is for event logging to syslog
#                       (LOG_EVENT_TARGETS contains 'syslog').
#
# storevntd:LOG_EVENT_SYSLOG_HOST = jupiter or 10.4.12.34
#------------------------------------------------------------------------------
#
# Parameter:            LOG_EVENT_SYSLOG_PORT
#
# Allowed values:       A decimal port number.
#
# Default value:        514
#
# Description:          Specifies the port to which the remote syslog 
#                       server is listening. This option is for event logging 
#                       to syslog (LOG_EVENT_TARGETS contains 'syslog').
#                       
#
# storevntd:LOG_EVENT_SYSLOG_PORT = 1234
#------------------------------------------------------------------------------
#
# Parameter:            SNMP_TRAP_CLIENT_REGISTRATION
#
# Allowed values:       IP,port,filter,state - with no spaces
#
# Default value:        none
#
# Description:          Provides a list of target IPs and ports to send
#                       SNMP traps to, when the LOG_EVENT_TARGETS option
#                       specifies snmp.
#
#                       Format is: IP,port,filter,state, where filter
#                       represents the trap sending filtering levels
#                       as defined in the fcmgmt MIB, and state
#                       represents the start up row state in the 
#                       trap_client_registration table in the fcmgmt MIB.
#
#                       Multiple entries should be on their own line,
#                       delineated with a backslash (\) character
#                       on the preceding line. 
#
#                       This parameter can be changed and reloaded  
#                       while the event daemon is running, with the
#                       CLI stordaemon action storevntd -cmd reload.
#
# storevntd:SNMP_TRAP_CLIENT_REGISTRATION =  11.22.33.44,162,10,ACTIVE \
#                                            55.66.77.88,162,10,ACTIVE 
#------------------------------------------------------------------------------
#
# Parameter:            SNMP_MANAGEMENT_URL
#
# Allowed values:       <ip|DNS host name><:port>
#
# Default value:        none
#
# Description:          Provides launch capability of a management application,
#                       such as SMC or ECC, from within a third party
#                       management framework. 
#
#                       This parameter can be changed and reloaded  
#                       while the event daemon is running, with the
#                       CLI stordaemon action storevntd -cmd reload.
#
# storevntd:SNMP_MANAGEMENT_URL=local:7070
#------------------------------------------------------------------------------
#
# Parameter:            TEST_MODE
#
# Allowed values:       disable | enable
#
# Default value:        disable
#
# Description:          Provides the capability to run storevntd in test mode.
#                       In this mode, faults can be artificially injected to
#                       generate events without stressing the Symmetrix.
#
# storevntd:TEST_MODE = enable
#
###############################################################################
#
###############################################################################
### storstpd [Statistics Collection (STP) Daemon] notes
###
###     This daemon supports STP Statistics collection.
###     Refer to the storstpd(3) man page for additional details.
###############################################################################
#
###############################################################################
#
###############################################################################
### storstpd daemon level options
###
###     These options control how the daemon behaves.
###############################################################################
#------------------------------------------------------------------------------
#
# Parameter:            DMN_RUN_SPA
#
# Allowed values:       disable | enable
#
# Default value:        enable
#
# Description:          Determines if storstpd starts the necessary
#                       components for supporting the SPA application.
#
#                       Note: SPA support is not available on the service
#                       processor and the setting of this option is ignored.
#
# storstpd:DMN_RUN_SPA  = disable
#------------------------------------------------------------------------------
#
# Parameter:            DMN_RUN_RTC
#
# Allowed values:       disable | enable
#
# Default value:        enable
#
# Description:          Determines if storstpd starts the necessary
#                       components for real-time metrics collection.
#
# storstpd:DMN_RUN_RTC  = disable
#
#------------------------------------------------------------------------------
#
# Parameter:            DMN_ROOT_LOCATION
#
# Allowed values:       Full file path specification.
#
# Default value:        UNIX: /var/symapi/stp
#                       Windows:  c:\\Program Files\\EMC\\SYMAPI\\stp
#
# Description:          Specifies a full file/path location that storstpd 
#                       will use as its root directory for file creation.
#
#                       Note: This location MUST exist or will revert to 
#                       default location.  
#
#                       Note: If storstpd runs as a privileged user, the 
#                       directory named here must also be specified in the 
#                       storstpd:secure_directory_path option. If storstpd is
#                       not run as a privileged user, there is no harm in 
#                       specifying it in the secure_directory_path, but it is
#                       not validated when running as a non-privileged user. 
#
#                       Note: if storstpd runs as non-root in Unix (stordaemon 
#                       setuser is used to change ownership) and this option is 
#                       changed, the stordaemon setuser command must be reissued
#                       to set permissions properly after this change. 
#
# storstpd:DMN_ROOT_LOCATION  = c:\\Program Files\\EMC\\SYMAPI\\stp
#------------------------------------------------------------------------------
#
# Parameter:            DMN_SYMMIDS
#
# Allowed values:       A comma-separated list of Symmetrix IDs; shortcuts 
#                       are supported.
#
# Default value:        None (all SymmIDs)
#
# Description:          Specifies a set of Symmetrix arrays for which the 
#                       storstpd should collect statistics. 
#                       If not present, storstpd will collect statistics
#                       for all local SymmIDs found.
#
# storstpd:DMN_SYMMIDS  = 6204,000000001234
#------------------------------------------------------------------------------
#
# Parameter:            DMN_REMOTE_MODE
#
# Allowed values:       enable | disable
#
# Default value:        disable
#
# Description:          Indicates that storstpd will establish a remote 
#                       connection, instead of operating locally. A valid 
#                       DMN_REMOTE_ADDRESS and DMN_REMOTE_PORT  must be 
#                       provided. This setting is ignored when running on a 
#                       service processor.
#
# storstpd:DMN_REMOTE_MODE = enable
#------------------------------------------------------------------------------
#
# Parameter:            DMN_REMOTE_ADDRESS
#
# Allowed values:       A valid IP address.
#
# Default value:        None
#
# Description:          Specifies a valid IP address used to establish a remote
#                       SYMAPI connection. This setting is ignored if 
#                       DMN_REMOTE_MODE is disabled.
#
# storstpd:DMN_REMOTE_ADDRESS  = 127.0.0.1
#------------------------------------------------------------------------------
#
# Parameter:            DMN_REMOTE_PORT
#
# Allowed values:       A valid IP port.
#
# Default value:        2707
#
# Description:          Specifies a valid IP port used to establish a remote 
#                       SYMAPI connection. This setting is ignored if 
#                       DMN_REMOTE_MODE is disabled.
#
# storstpd:DMN_REMOTE_PORT  = 2707
#
#------------------------------------------------------------------------------
#
# Parameter:            DMN_RETENTION_DAYS
#
# Allowed values:       0-365
#     
# Default value:        30
#
# Description:          Sets the current retention policy, in days.
#
# storstpd:DMN_RETENTION_DAYS  = 7
#------------------------------------------------------------------------------
#
# Parameter:            DMN_DISK_SPACE_THRESHOLD
#
# Allowed values:       1 - 99
#
# Default value:        80
#
# Description:          Tells storstpd not to allow disk space consumption
#                       to rise above the threshold. Must be an integer from
#                       1 (percent) to 99 (percent).
#
# storstpd:DMN_DISK_SPACE_THRESHOLD = 80
#------------------------------------------------------------------------------
#
# Parameter:            DMN_ARCHIVE_INTERVAL 
#
# Allowed values:       Number of hours, HH, from 0-24.
#
# Default value:        1
#
# Description:          Tells storstpd to archive every HH hours.
#                       A setting of 1 will tell storstpd to archive
#                       every hour. 
#
# storstpd:DMN_ARCHIVE_INTERVAL = 1
#------------------------------------------------------------------------------
#
###############################################################################
#
###############################################################################
### Database Daemon parameters
###
###     These daemons are used by the EMC Solutions Enabler SRM component to 
###     communicate with various Database products (Oracle, Sybase, etc.).
###     Refer to their man pages.
###     Daemon names can be one of the following:
###            stororad         One of the Oracle DB Daemons
###            storsqld         One of the SQL-Server DB Daemons
###            storsybsd        One of the Sybase DB Daemons
###            storudb          One of the UDB DB Daemons
###            storifmxd        One of the Informix DB Daemons
###
###         If a Database SID (Instance) is being used, that is appended
###         to the daemon name as follows:
###            stororadInst1        Instance (SID) 'Inst1' of Oracle DB Daemon
###
###         As previously noted, wildcarding on the daemon name is possible:
###            stororad         Applies to the default (no SID) daemon.
###            stororadInst1    Applies to the 'Inst1' instance of the daemon.
###            stororad*        Applies to any instance of the daemon -
###                               including the default (no SID) one.
###############################################################################


