#!/bin/bash

#/*******************************************************************
# * This file is part of the Emulex HBA Manager remote              *
# * management configuration application for Emulex Fibre           *
# * Channel Host Bus Adapters.                                      *
# * Copyright (c) 2025 Broadcom. All Rights Reserved.               *
# * The term "Broadcom" refers to Broadcom Inc. and/or              *
# * its subsidiaries.                                               *
# *                                                                 *
# * www.broadcom.com                                                *
# *                                                                 *
# * Description:                                                    *
# * Invoked from RMAPI after setting linux driver parameter         *
# * (adding entry to elx-lpfc.conf) to recreate the linux system    *
# * initial ram disk.                                               *
# *                                                                 *
# * The lpfc driver loads so early in the machine boot cycle,       *
# * that it will not receive the new parameter value unless the     *
# * updated elx-lpfc.conf is reinserted into the ram disk.          *
# *                                                                 *
#/*******************************************************************
#

exec_command()
{
	local TEMPFILE
	RETURNVALUE=0
	if [ "$2" = background ]; then
		TEMPFILE=`mktemp /tmp/elx-lpfc-install.XXXXXX`
		(eval $1; echo "RETURNVALUE=$?" >> ${TEMPFILE}) &
		while [ -e ${TEMPFILE} ] && [ ! -s ${TEMPFILE} ]; do
			sleep 3
			echo -en "."
		done
		. ${TEMPFILE}
		rm -f ${TEMPFILE}
	else
		eval $1
		RETURNVALUE=$?
	fi
	echo -en "\n"
	return ${RETURNVALUE}
}

# Function:  backup_files_to_elx()
#
# Description:
#   Copy each file passed as a parameter to filename.elx.
#
# Parameters:
#   A list of filenames to back up.
#
# Returns:
#   Nothing.
backup_files_to_elx()
{
	for i in $@ ; do
	if [ -e $i ] ; then
		cp -f $i $i.elx
		if [ $? -ne 0 ] ; then
			echo "Error $? copying $i to $i.elx"
		else
			echo "Original ramdisk image $i saved as $i.elx"
		fi
	fi
	done
}

# Function:  create_ramdisk()
#
# Description:
#   Creates a ramdisk image for the currently running kernel.
#
# Parameters:
#   none.
#
# Returns:
#   Nothing.
create_ramdisk()
{
	UNAME=$(uname -r)
	ARCH=$(uname -m)

	if [ ${DISTRIBUTION} = "redhat" ] || [ ${DISTRIBUTION} = "asianux" ] || [ ${DISTRIBUTION} = "powerkvm" ]; then
		# Configure ramdisk for Red Hat Linux, Asian Linux, or PowerKVM
		if [ ${DISTRIBUTION} = "redhat" ]; then
			RH_VERSION_MAJOR=$(cat /etc/redhat-release | sed "s/[^0-9\.]//g" | awk -F. '{print $1}')
		elif [ ${DISTRIBUTION} = "asianux" ]; then
			RH_VERSION_MAJOR=$(cat /etc/asianux-release | sed "s/[^0-9\.]//g" | awk -F. '{print $1}')
		else
			#Treat powerkvm like RHEL7
			RH_VERSION_MAJOR=7
		fi
		
		INITRDFILE="/boot/initramfs-${UNAME}.img"
		
		if [ -f /usr/bin/dracut ]; then
			DRACUT_BIN="/usr/bin/dracut"
		elif [ -f /sbin/dracut ]; then
			DRACUT_BIN="/sbin/dracut"
		else
			DRACUT_BIN="dracut"
		fi
		
		backup_files_to_elx ${INITRDFILE}
		echo -n "Creating ramdisk ."
		
		exec_command "${DRACUT_BIN} -f ${INITRDFILE} ${UNAME}" background
		if [ $? -ne 0 ]; then
			echo "Could not create ramdisk image.  Restoring original ramdisk..."
			cp -f ${INITRDFILE}.elx ${INITRDFILE}
			CP_STATUS=$?
			
			if [ $CP_STATUS -eq 0 ] ; then
				echo "Original ramdisk restored."
			else
				echo "Original ramdisk could not be restored - error $CP_STATUS"
			fi
			exit 1
		fi
	elif [ ${DISTRIBUTION} = "suse" ]; then
		# Configure ramdisk configuration file for SuSE Linux Enterprise Server.
		INITRDFILE="/boot/initrd-${UNAME}"
		
		# SLES 15 SP0/SP1, SLES 12 SP4/SP5
		if [ -f /usr/bin/dracut ]; then
			DRACUT_BIN="/usr/bin/dracut"
		elif [ -f /sbin/dracut ]; then
			DRACUT_BIN="/sbin/dracut"
		else
			DRACUT_BIN="dracut"
		fi
		
		backup_files_to_elx ${INITRDFILE}
		
		echo -n "Creating ramdisk ."
		
		exec_command "${DRACUT_BIN} -qf ${INITRDFILE} ${UNAME}" background
		if [ $? -ne 0 ]; then
			echo "Could not create ramdisk image.  Restoring original ramdisk..."
			cp -f ${INITRDFILE}.elx ${INITRDFILE}
			CP_STATUS=$?
			
			if [ $CP_STATUS -eq 0 ] ; then
				echo "Original ramdisk restored."
			else
				echo "Original ramdisk could not be restored - error $CP_STATUS"
			fi
			exit 1
		fi
	elif [ ${DISTRIBUTION} = "debian" ]; then
		# Configure ramdisk for Debian.
		INITRDFILE="/boot/initrd.img-${UNAME}"
		backup_files_to_elx ${INITRDFILE}
		echo -n "Creating ramdisk ."
		exec_command "${DRACUT_BIN} -qf ${INITRDFILE} ${UNAME}" background
		#exec_command "sudo update-initramfs -u -k ${UNAME}" background
		if [ $? -ne 0 ]; then
			echo "Could not create ramdisk image.  Restoring original ramdisk ..."
			cp -f ${INITRDFILE}.elx ${INITRDFILE}
			echo "Original ramdisk restored."
			echo ""
			echo "Please run uninstall to remove any partially"
			echo "installed components of the Emulex driver and utility applications."
			exit 1
		fi
	elif [ ${DISTRIBUTION} = "xenserver" ]; then
		XS_VERSION_MAJOR=$(cat /etc/redhat-release | sed "s/[^0-9\.]//g" | awk -F. '{print $1}')
		INITRDFILE="/boot/initrd-${UNAME}.img"
		
		backup_files_to_elx ${INITRDFILE}
		echo -n "Creating ramdisk ."
		if [ -x /bin/mkinitrd ]; then
			MKINITRD_CMD="/bin/mkinitrd"
		elif [ -x /sbin/mkinitrd ]; then
			MKINITRD_CMD="/sbin/mkinitrd"
		else
			MKINITRD_CMD="mkinitrd"
		fi
		
		exec_command "${MKINITRD_CMD} --allow-missing -f ${INITRDFILE} ${UNAME}" background
		
		if [ $? -ne 0 ] ; then
			echo "Could not create ramdisk image.  Restoring original ramdisk ..."
			cp -f ${INITRDFILE}.elx ${INITRDFILE}
			echo "Original ramdisk restored."
			echo ""
			echo "Please run uninstall to remove any partially"
			echo "installed components of the Emulex driver and utility applications."
			exit 1
		fi
	elif [[ ${DISTRIBUTION} == "openEuler" ]]; then       
		INITRDFILE="/boot/initramfs-${UNAME}.img"

		if [[ -f /usr/bin/dracut ]]; then
			DRACUT_BIN="/usr/bin/dracut"
		else
			DRACUT_BIN="dracut"
		fi

		backup_files_to_elx ${INITRDFILE}
		echo -n "Creating ramdisk ."

		exec_command "${DRACUT_BIN} -f ${INITRDFILE} ${UNAME}" background
		if [[ $? -ne 0 ]]; then
			echo "Could not create ramdisk image.  Restoring original ramdisk..."
			cp -f ${INITRDFILE}.elx ${INITRDFILE}
			CP_STATUS=$?

			if [[ $CP_STATUS -eq 0 ]]; then
				echo "Original ramdisk restored."
			else
				echo "Original ramdisk could not be restored - error $CP_STATUS"
			fi
			exit 1
		fi
	fi

	return 0
}

print_help()
{
	echo ""
	echo "  The following option must be used:"
	echo ""
	echo "   --createramdisk   - Create a new ramdisk image.  Use this option after"
	echo "                        you have modified driver parameters in the"
	echo "                        /etc/modprobe.conf file."
	echo ""
}

if [ $# -eq 0 ] ; then
	print_help
	exit 1
fi

echo "Determining distribution type..."

# Check for XenServer before checking for Red Hat
if [ -f /etc/xensource-inventory ]; then
	DISTRIBUTION=xenserver
elif [ -f /etc/asianux-release ]; then
	DISTRIBUTION=asianux
elif [ -f /etc/redhat-release ]; then
	DISTRIBUTION=redhat
elif [ -f /etc/ibm_powerkvm-release ]; then
	DISTRIBUTION=powerkvm
elif [[ -f /etc/SuSE-release || -f /etc/SUSE-brand ]]; then
	DISTRIBUTION=suse
elif [ -f /etc/debian_version ]; then
	DISTRIBUTION=debian
elif [[ -f /etc/openEuler-release ]]; then
	DISTRIBUTION=openEuler
elif [[ -f /etc/UnionTech-release ]]; then
	DISTRIBUTION=openEuler
elif [[ -f /etc/kylin-release ]] && grep -q Kylin /etc/kylin-release; then
	DISTRIBUTION=openEuler
elif [[ -f /etc/os-release ]] && grep -q Fusion /etc/os-release; then
	DISTRIBUTION=openEuler
elif [[ -f /etc/os-release ]] && grep -q UOS /etc/os-release; then
	DISTRIBUTION=openEuler
else
	echo ""
	echo "Unable to determine distribution type"
	exit 1
fi

if [ "$1" = "--createramdisk" ]; then
	create_ramdisk
else
	print_help
	exit 1
fi
 
exit 0
