banner motd # ****************************************************************************** * NetApp Reference Configuration File (RCF) * * Switch : Cisco Nexus 3132Q-V * Filename : Nexus_3132QV_RCF_v1.6-Cluster-HA-Breakout.txt * Date : Nov-02-2020 * Version : v1.6 * * Port Usage : Breakout configuration * Ports 1- 6: Breakout mode (4x10GbE) Intra-Cluster Ports, int e1/1/1-4, * e1/2/1-4, e1/3/1-4,int e1/4/1-4, e1/5/1-4, e1/6/1-4 * Ports 7-30: 40GbE Intra-Cluster/HA Ports, int e1/7-30 * Ports 31-32: Intra-Cluster ISL Ports, int e1/31-32 * * IMPORTANT NOTES * - Load Nexus_3132QV_RCF_v1.6-Cluster-HA.txt for non breakout config * * - This RCF utilizes QoS and requires speific TCAM configuration, requiring * cluster switch to be rebooted before the cluster becomes operational. * * - Perform the following steps to ensure proper RCF installation: * * (1) Apply RCF, expect following messages: * - Please save config and reload the system... * - Edge port type (portfast) should only be enabled on ports... * - TCAM region is not configured for feature QoS class IPv4... * * (2) Save running-configuration and reboot Cluster Switch * ****************************************************************************** # interface breakout module 1 port 1-6 map 10g-4x feature lacp feature ssh feature scp-server feature sftp-server vlan 17,18 exit cdp enable cdp advertise v1 cdp timer 5 system default switchport no system default switchport shutdown snmp-server community cshm1! group network-operator errdisable recovery interval 30 port-channel load-balance src-dst ip-l4port-vlan ip domain-lookup hardware access-list tcam region racl 256 hardware access-list tcam region e-racl 256 hardware access-list tcam region span 0 hardware access-list tcam region qos 256 interface port-channel1 switchport mode trunk spanning-tree port type network mtu 9216 no shutdown #********** PFC/QoS/ECN ********** class-map type qos match-all HA match cos 5 policy-map type qos HA class HA set qos-group 5 class class-default set qos-group 0 policy-map type queuing HA_EGRESS class type queuing c-out-8q-q7 priority level 1 class type queuing c-out-8q-q6 bandwidth remaining percent 0 class type queuing c-out-8q-q5 bandwidth remaining percent 60 random-detect threshold burst-optimized ecn class type queuing c-out-8q-q4 bandwidth remaining percent 0 class type queuing c-out-8q-q3 bandwidth remaining percent 0 class type queuing c-out-8q-q2 bandwidth remaining percent 0 class type queuing c-out-8q-q1 bandwidth remaining percent 0 class type queuing c-out-8q-q-default bandwidth remaining percent 40 random-detect threshold burst-optimized ecn policy-map type network-qos NETQOS class type network-qos c-8q-nq5 pause pfc-cos 5 mtu 9216 class type network-qos c-8q-nq-default mtu 9216 system qos service-policy type network-qos NETQOS service-policy type queuing output HA_EGRESS copp profile strict #********** Port Profiles ********** port-profile type ethernet 10G description 10GbE Intra-Cluster Node switchport mode trunk spanning-tree port type edge trunk spanning-tree bpduguard enable mtu 9216 state enabled exit port-profile type ethernet 40G description 40GbE Intra-Cluster/HA Node switchport mode trunk spanning-tree port type edge trunk spanning-tree bpduguard enable mtu 9216 state enabled exit #********** Interfaces ********** interface e1/1/1-4, e1/2/1-4, e1/3/1-4, e1/4/1-4, e1/5/1-4, e1/6/1-4 inherit port-profile 10G priority-flow-control mode auto service-policy type qos input HA exit interface Ethernet 1/7-30 inherit port-profile 40G priority-flow-control mode auto service-policy type qos input HA exit #********** Intra-Cluster ISL ports ********** interface Ethernet1/31 description Intra-Cluster Switch ISL Port 1/31 (port channel) switchport mode trunk spanning-tree port type edge trunk mtu 9216 channel-group 1 mode active no shutdown interface Ethernet1/32 description Intra-Cluster Switch ISL Port 1/32 (port channel) switchport mode trunk spanning-tree port type edge trunk mtu 9216 channel-group 1 mode active no shutdown end