antivirus true 8.0.0 Protect user data against viruses. Provide on-access and on-demand scanning. Disable antivirus engine using "antivirus engine disable" then unschedule all the on-demand jobs using "antivirus on-demand unschedule" false true true av_trend true 8.2.0 Enable Trend Micro antivirus. Disable antivirus engine and set vendor to "none" using the commands "antivirus engine disable" and "antivirus engine modify -vendor none". false false true false volume.snapmirror_physical true 8.1.0 Asynchronous physical volume mirroring. Delete all snapmirror relationships using "snapmirror delete" and then delete all mirror volumes using "volume delete" false true false volume.snapmirror_v2 true 8.2.0 Asynchronous volume mirroring Version 2. Break all SnapMirror relationships whose capability is "8.2 and above" using the "snapmirror break" command; Delete all SnapMirror relationships whose capability is "8.2 and above" using the "snapmirror delete" command on the destination Vserver and the "snapmirror release" command on the source Vserver; Delete all SnapMirror Policies using the "snapmirror policy delete" command; false true false volume.stripe_format_full true 8.0.0 Striped volumes where directories and files are striped. Delete all striped volumes with format full using "volume delete" false true false cluster_peer true 8.1.0 A management relationship between two clusters that allows the clusters to exchange data and request remote operations. Delete all cluster peer relationships using the "cluster peer delete" command and remove all intercluster LIFs using the "network interface delete" command. false false false cluster_peer_authentication true 8.3.0 Authentication of the management relationship between two clusters that allows the clusters to exchange data and request remote operations. No action required. true false false cluster_peer_reciprocal true 9.3.0 A management relationship between two clusters that can be automatically established based on permission for the puspose of exchanging data and request remote operations. No action required. true false false unauthenticated_cluster_peer true 8.3.0 Permission to create unauthenticated cluster peering arrangements (ways for clusters to exchange data and perform operations) even though both clusters are capable of authenticated ones. No action required. false true false false expose_authenticated_cluster_peer false 8.3.0 Permission to enable cluster peer authentication, which at the moment is otherwise dark content. No action required. true false false false true volume.quotas.user_group_quotas true 8.1.0 Support for user and group quotas on regular flexvols. Delete all user and group quota rules from the replicated database using "volume quota policy rule delete". In addition, turn off quotas for all volumes in the cluster that are currently enforcing user or group quotas. To identify these volumes, use "volume quota show -fields is-user-quota-enforced, is-group-quota-enforced". On these volumes, use the "volume quota off" command to turn off quotas. Tree quota rules and volumes that are only enforcing tree quota rules will not be affected by this revert. false true false config.backup_restore false 8.1.0 Configuration backup and restore feature. No action required false false false volume.nvfail true 8.1.0 Support for NVFAIL feature on cluster-mode volumes. Disable NVFAIL feature on all cluster-mode volumes using "volume modify -nvfail off" false true false flexcache true 8.1.0 Cache user data for performance acceleration. Delete all flexcache volumes in the cluster. View the flexcache volumes using "flexcache show". Then delete them with "flexcache delete" false true false false jobmgr.library_v1 true 8.1.0 Job Manager Library v.1. No action required true true false true web.rsa_7mode_compatibility true 8.1.0 Provides node infrastructure for the Remote Support Agent (RSA) which runs on the RLM or Service Processor. Disable the Service Processor Infrastructure on all nodes in the cluster with the "vserver services web" command and then remove role access for it in the "vserver services web access" command. false false false web.package_versions true 8.1.1 Auto-activate the highest version of each web service that exists cluster-wide. No action required. true false false web.support_infrastructure true 8.1.0 Provides web-based support tools. Disable the Support Diagnostics on all nodes in the cluster with the "vserver services web" command and then remove role access for it in the "vserver services web access" command. false false false security.certificate_management true 8.1.0 Provides encryption certificate management features. Remove the certificates from all of the Vservers in the cluster with the "security certificate" command. false false false volume.sis true 8.1.0 Volume deduplication, compression, and file/LUN clones. Undo sis volumes. To view sis volumes use "volume show -is-sis-volume true". To undo sis volumes use "volume efficiency undo". false false true SAN 8.1.0 SAN support in Data ONTAP Cluster-Mode. Delete all SAN objects via the following commands: "lun unmap", "lun delete", "igroup delete", "portset delete", "iscsi tpgroup delete", "network interface delete", "iscsi security delete", "fcp wwpn-alias remove", "fcp delete", "iscsi delete" true false true web.ssl_encryption true 8.1.0 Provides SSL encryption for HTTP protocols. Disable SSL on all Vservers using the "security ssl" command. false false false web.ssl_enforcement true 8.1.0 Enforces the use of SSL for web services. Set the ssl-only flag on all services in the "vserver services web" command to false. false false false vserver.management true 8.1.0 Vserver Management functionality No action required true false cifs.smb2 8.1.0 CIFS SMB2.0/2.1 protocol. You must disable the SMB 2.0/2.1 protocols on all Vservers. The following advanced privilege command will disable these protocols on all Vservers: "vserver cifs options modify -vserver * -smb2-enabled false" false true cifs.mp 8.1.0 CIFS MP Support Only 8 CIFS servers are allowed. You can delete CIFS servers using "cifs delete" command. false true cifs.lug 8.2.0 CIFS Local Users and Groups You must disable the CIFS local users and groups feature on all Vservers. The following advanced privilege command will disable this feature on all Vservers: "vserver cifs options modify -vserver * -is-local-users-and-groups-enabled false" false true cifs.aes 8.3.0 CIFS AES capability You must disable the CIFS AES feature on all Vservers. The following command will disable this feature on all Vservers: "vserver cifs security modify -vserver * -is-aes-encryption-enabled false" false true false cifs.trustedDomainLookup true true 8.2.1 Search for Windows users in trusted domains that map to UNIX users Disable enumeration of trusted domains and search capability feature on all Vservers. The following advanced privilege command will disable this feature on all Vservers: "vserver cifs options modify -vserver * -is-trusted-domain-enum-search-enabled false" false false true cifs.reparse_point 8.2.0 CIFS Reparse Point. You must disable the CIFS Reparse Point feature on all Vservers. The following advanced privilege command will disable this feature on all Vservers: "vserver cifs options modify -vserver * -is-use-junctions-as-reparse-points-enabled false" false true cifs.password.change.schedule 8.3.0 true CIFS Password Change Schedule You must disable the CIFS password change schedule feature on all Vservers. The following command will disable this feature on all Vservers: "vserver cifs domain password schedule modify -vserver * -is-schedule-enabled false" false false false false true volume.snapshot.policy.prefixes true 8.1.0 Addition of snapshot name prefixes to snapshot schedules. Disable the feature by setting prefix name equal to the schedule name. Use the command "volume snapshot policy reset-prefix" to reset the prefixes to schedule names false false volume.transition 8.1.0 Support for transitioning volumes from 7-mode to cluster-mode. Delete all volumes that have been transitioned from 7-mode false true kcs.1.0 true 8.1.0 Kernel Cluster Services No action required true true true false volume.flexclone true 8.1.0 Volume FlexClone Delete or split all flexclone volumes in the cluster. Use "volume clone show" to view all flexclone volumes. Then delete each volume with "volume delete" or split it with "volume clone split start", and wait for completion of the split operation. false false false true nfs.rquota.nfsv4x true 8.1.0 RQUOTA and Network File System Version 4.0, Version 4.1 Support Disable NFSv4.0, NFSv4.1 version, vStorage and RQUOTA related options for all Vservers in the cluster. View the state of NFS related options using the "vserver nfs show -instance" command. Disable the concerned options with the "vserver nfs modify" command. false true false false nfs.ejukebox.nfsv3 true 8.1.3 Support for making the default value for the EJUKEBOX option "true". No Action Required. true true true false nfs.8.2.0 true 8.2.0 Nfsv4 1024 ACES, Audit Aces, v4.1 Delegations, Inter-vserver vStorage and IPV6 Support Set Maximum Number of ACES per ACL less than or equal to 400. Disable Audit ACEs, v4.1 delegations, Inter-vserver vStorage, IPv6 related options and v4.x Session related options for all Vservers in the cluster. View the state of NFS related options using the "vserver nfs show -instance" command. Disable the concerned options with the "vserver nfs modify" command. false true false false nfs.8.2.1 true 8.2.1 Nfsv4.1 Exchange ID scope update for VMware No Action Required. true true false false volume.move_bre false 8.1.0 Volume Move Support No Action Required false false false false cm.aggregator false 8.1.0 Aggregator for Counter Manager No Action Required false false false isns_v1 8.1.1 iSNS Support for C-Mode SAN Stop and delete iSNS service on all vservers using "vserver iscsi isns stop" and "vserver iscsi isns delete" commands. true false false SAN_AIX_SUPPORT 8.1.1 true Capability for SCSI ACA support Unmap all the luns mapped to all the AIX igroups and delete all AIX igroups via the following commands: "lun unmap", "igroup delete". Then disable the SAN_AIX_SUPPORT capability using the advanced privilege level command "lun igroup disable-aix-support" true false false aggregate.syncmirror true 8.3.0 Mirroring feature for aggregates Delete the mirrored plex from all mirrored aggregates in the cluster using the command "storage aggregate plex delete" false false true false nfs.tcplargeread.nfsv3 true 8.1.0 Support separate fields for NFS TCP read and write size fields, including larger reads No Action Required false false false volume.more_flexvols true 8.2.0 Panamax support for more flexvols. You must delete the unsupported number of volumes by using "volume delete" false true true false flexcache.delegations true 8.2.0 Delegations allow caches to serve read data without verifying staleness. No action required false true false false flexcache.extended_delegations true 8.3.0 Extended delegations allow caches to serve reads on directories, ACLs, streams, symlinks, device files and junctions without verifying staleness. No action required false true false false volume.move.status true 8.1.1 Volume Move Status Command No Action Required false false true san.vvol true 8.2.0 Cluster-Mode SAN support of VMware vvol provisioning Delete all vvol bindings via the NetApp VMware VASA plugin or the "lun bind destroy" command. true false true volume.move_ndo true 8.2.0 Volume move enhancements for NDO No volume moves can be in progress during revert. Either wait until they are complete or stop them using "volume move abort". false false true false volume.snapshot.policy.vserverization true 8.2.0 Snapshot policies are vserverized and snapshot policy operations can be delegated to Vserver admin. Delete all policies created by the Vserver admin and disable all policies created by the cluster admin. true true false false vserver.snmp.user true 8.1.1 Data Vserver snmp support Remove all the SNMP users in Cluster Vservers using the "security login delete" command true false false false cluster.uuid.enhancement true 8.2.0 This capability provides a cluster UUID, separate from the RDB, that is stable for the life of the cluster. No Action Required false false false vserver_peer true 8.2.0 A management relationship between two Vserver that allows inter-vserver relationships and delegation of application relationships. Delete all Vserver peer relationships by using the "vserver peer delete" command. You must delete the applications before deleting the Vserver peer relationship. false true true false repository 8.1.1 Repository base support Remove all of the Vservers with Infinite Volume false true repository.8.2.0 true 8.2.0 Support for CIFS, NFSv4.x, and unified security style for the Infinite Volume No Action Required true true false false repository.8.3.0 true 8.3.0 Support for post create policy, on-disk unified security style, on-disk constituent role and WAFL_FLAG_IV_METATYPE for the Infinite Volume No Action Required true true false false security.login.role.enhancements true 8.1.3 Support for new RBAC characteristics. Reset new role options to their default values by using "security login role config reset" command. false true false security.login.domain_tunnel true 8.1.1 Domain Authentication support for administrative Vserver. Delete authentication tunnel Vserver for administrative Vserver by using the command "security login domain-tunnel delete" command. false true false vserver.sn_management true 8.2.0 This capability provides external UUID and Vserver metadata support. No action required. false true true false vserver.nameservices true 8.2.0 This capability is for the new Name Services features which are being added in SN.0. Features which will be using this capability are, 1.Secure Multi-tenancy for load-balancer, 2.Vserverized LDAP client No Action Required true true false false false nameservices.netgroup.byhost true 8.2.3 This capability is for the new Name Service feature to query the netgroup.byhost map No Action Required true true false false false nameservices.usergrouplimits true 8.2.3 User Group Limits support No action required. false false true false nameservices.fileonlysupport true 9.1.0 File-only Configuration support Disable the file-only option for all Vservers in the cluster before downgrading using the (privilege: diagnostic) "vserver services name-service unix-user file-only modify -is-enabled false -vserver *" and "vserver services name-service unix-group file-only modify -is-enabled false -vserver *. false false false net.ipv6 true 8.2.0 IPv6 Support in the cluster Disable IPv6 in the cluster using command 'network options ipv6 modify -enabled false' false false false false net.ipv6.ra.proc true 8.3.0 Capability to enable/disable IPv6 Router Advertisement (RA) processing in the cluster No action required true true false false qos.15k_workloads_provisioning true 8.2.0 QoS support in the cluster Remove existing QoS workloads and QoS policy groups by using the following command sequence: "qos workload delete *" (privilege: diagnostic), "qos policy-group delete *". false false false false security.client_certificate_management true 8.2.0 Provides encryption certificate management features for client authentication. Delete all non-server type of certificates from all of the Vservers in the cluster using "security certificate delete" command. false false false security.server_ca_certificate_management true 8.2.1 Provides certificate management features for server-ca type certificate. Delete all "server-ca" certificates for all of the Vservers in the cluster using the "security certificate delete -type server-ca -vserver *" command. false false true false security.chain_certificate_management true 8.2.0 Provides the ability to include the chain certificate for server authentication. Delete all server type of certificates that has the certificate chain from all of the Vservers in the cluster using "security certificate delete" command. false false false security.ssl.client_certificate_management true 8.3.0 Provides encryption certificate management features for client authentication. No Action Required true true false false web.ssl_client_auth true 8.2.0 Provides SSL encryption for HTTP protocols during client authentication. Disable SSL client authentication on all the Vservers using "ssl modify { -client-enabled true } -client-enabled false" command. false false false web.ssl_serverca_chain true 8.2.0 Provides certificate chain for server certificate during SSL encryption. Disable SSL server certificate chain for the server certificate on all the Vservers using "security ssl modify" command. false false false rsh_enable true 8.2.0 Enabling RSH on Admin Vserver. Delete all RSH users using "security login delete -application rsh" command. false false true false ndmp.vserver_aware true 8.2.0 Ndmp service that allows vserver scoped access to volumes Disable NDMP vserver awareness by turning on the node-scope behavior using "system services ndmp node-scope-mode on" true false false false ndmp.ext.0x2050.v1_v11 true 8.3.0 Capability to enable NDMP extension 0x2050 versions 1 to 11 No action required true true false false license.policy.use_v2 true 8.2.0 Provides use of licensing v2 infrastructure No action required. true true false false statistics.snapshot.use_v1 true 8.2.0 Statistics start / stop / sample commands No action required. true true false false statistics.tables true 8.2.0 Statistics enhancements for 8.2.0 No action required. true true false false statistics.catalog.use_v1 true 8.2.0 Statistics catalog commands No action required. true true false false statistics.smf.fields.use_8.2.0 true 8.2.0 CM SMF fields added in version 8.2.0 No action required. true true false false statistics.key_counters true 8.2.0 Key counters flag in perf-object-counter-list-info No action required. true true false false statistics.extra_object_info true 8.2.0 Additional information is returned from the perf-object-list-info ZAPI No action required. true true false false statistics.preset true 8.2.0 Performance Preset configuration support No action required. true true false false statistics.archive true 8.2.0 Clustered Performance Archive functionality No action required. true true false false statistics.archive.perfstatd true 8.3.0 Clustered Performance Archive PerfStatD functionality No action required. true true false false statistics.archive.opm_config true 8.3.1 Clustered Performance Archive OPM configuration ability Disable this cluster-wide capability by running the following diagnostic command: "statistics archive config modify -disable-opm-config" false false false false statistics.archive.asup_store true 9.2.0 Clustered Performance Archive ASUP datastore functionality No action required. true true false false statistics.views true 8.3.0 Statistics Views commands No action required. true true false false statistics.system.aggregation.enable true 8.3.0 System object auto aggregation support No action required. true true false false statistics.metadata true 9.0.0 Performance Metadata cache No action required. true true false false statistics.archive.perfstatd.autodisablepostduration true 9.1.0 Clustered Performance Archive PerfStatD auto-disables after a given duration when PerfStatD is enabled. Prepare the system for a downgrade by executing the (privilege: advanced) 'statistics settings prepare-to-downgrade' command. true false false false timekeeping.cluster_wide_management true 8.3.0 Provides cluster-scoped external Network Time Protocol (NTP) management instead of node-scoped. No Action Required. true false false false node_mgmt_lif_failover 8.2.0 Support for failover of node-mgmt LIFs between network ports on the same node No Action Required false false cifs.shadowcopy true 8.2.0 Shadow Copy a.k.a. Volume Shadow Copy Service a.k.a. VSS Disable this capability on all vservers by using the following advanced privilege command: "vserver cifs options modify -vserver * -shadowcopy-enabled false". true false true false cifs.branchcache true 8.2.0 CIFS BranchCache support Disable the BranchCache capability on all Vservers using the command "vserver cifs branchcache delete -vserver * -flush-hashes true". false false true false antivirus.policy true 8.2.0 Vserverization of antivirus on-access policies and on-demand commands. One or more vserver scoped on_demand report exist. Command to delete the report - antivirus on-demand report delete. false true false cifs.smb3 true 8.2.0 CIFS SMB3 protocol You must disable the SMB 3 protocol on all Vservers. The following advanced privilege command will disable these protocols on all Vservers: "vserver cifs options modify -vserver * -smb3-enabled false". true false true false vserver.ad true 8.2.1 Active Directory authentication You must remove the Active Directory accounts on all Vservers using the command "vserver active-directory delete -vserver *" false false true volume.vm_align true 8.1.1 Provides for support of the vm-align option during volume create. Delete all volumes with the vm-align option set. false false true false nameservices.dnslb.gm true 8.1.4 This capability is for the change in DNS load balancing algorithm. Disable the lb-geometric option using "network options lb-geometric modify -enable false" command true true false false false cmode.smtape true 8.2.0 Cmode SMTape. No SMTape backup/restore can be in progress during revert. Either wait until they are complete or stop them using "smtape abort". false false false false aggregate.mixed.raid.type true 8.2.0 Mixed RAID type feature for aggregates Remove all mixed RAID type aggregates in the cluster using "storage aggregate delete" or "storage aggregate modify -raidtype" command false false false false flexcache.policy_v2 true 8.2.0 The default TTL values for cache-policies changed in this version. Existing defaults should only change when every node has upgraded. Revert to RR false true false sn.vldb true 8.2.0 Enables VLDB enhancements No Action Required false false false false security.certificate_management_serial true 8.2.0 Provides the serial number information of the certificate. No Action Required true true false false cserver.metadata.volume.audit true 8.2.0 Provides cluster-scoped system volumes to support Vserver multi-protocol auditing. Fully disable Vserver multi-protocol auditing before continuing. Use "vserver audit disable -vserver *" command to disable audit for all the Vservers followed by "vserver audit delete *" command to delete audit config for all the Vservers. false false false multiproto.audit.evtxlog.support true 8.2.1 EVTX log format support in Auditing for Data ONTAP Cluster-Mode. Set the audit config log format to XML for all the Vservers in the cluster. Use the command: "vserver audit modify -vserver * -format xml." false false true false multiproto.audit.cifslogonlogoff.support true 8.3.0 Auditing of CIFS Logon/Logoff events for Clustered Data ONTAP. Set the events audited to 'file-ops' for all the Vservers in the cluster. Use the command: vserver audit modify -vserver * -events file-ops false false true false multiproto.audit.capstaging.support true 8.3.0 Auditing of Central Access Policy Staging events for Clustered Data ONTAP. Set the events audited to 'file-ops' for all the Vservers in the cluster. Use the command: vserver audit modify -vserver * -events file-ops false false true false cserver.metadata.volume.crs true 8.3.0 Provides cluster-scoped system volumes to support the Configuration Replication Service (CRS). Fully disable Vserver Disaster Recovery (DR), and MetroCluster failover before continuing. false false false multiproto.audit true 8.2.0 Multiprotocol Audit support in Data ONTAP Cluster-Mode. You must delete Audit config from all the Vservers in the cluster before reverting. Use "vserver audit delete -vserver *" command to delete audit config from all the vservers. false false true false fpolicy true 8.2.0 FPolicy adds support for FPolicy server to plug into in-band protocol request processing and alter the execution to add functionality to Data ONTAP You must disable all the policies before revert using command "fpolicy disable *". false false true false fpolicy.replication.mcc true 8.3.0 This capability is for the fPolicy feature which are being added in FS.0. No Action Required true true false false false network.options.switchless_cluster.v1 true 8.2.0 Two-node switchless cluster Disable using "network options switchless-cluster modify -enabled false" command. false false false false web.cluster_proxy true 8.2.0 Apache cluster proxy load distribution No action required. true false false web.disco.cluster true 8.2.0 Data ONTAP discovery web service on cluster mgmt LIFs. No action required. true false false snapdiff.zapi.v1 true 8.2.0 Cluster-Mode Snapdiff Zapi No action required false false false false cluster_limits_8_2_0 true 8.2.0 Cluster limits for Data ONTAP version 8.2.0 No action required. true true false false security.trace true 8.2.0 Security Trace support in Data ONTAP Cluster Mode. You must delete security trace configurations from all the Vservers in the cluster before reverting. Use the command 'vserver security trace filter delete *' to delete the security trace filters from all the Vservers. false false true false vifmgr.synchronous_lif_migration true 8.2.0 Support for synchronous lif migration between two nodes No Action Required false false volume.snapshot.snapmirror.labels true 8.2.0 SnapMirror Label operations are allowed in all snapshot and snapshot policy subset of commands Clear the SnapMirror Label from all the schedules belonging to all snapshot policies true true false false DATA_ONTAP.8.2.0 true 8.2.0 Cluster Effective Version is Data ONTAP version 8.2.0 No action required. true true false false DATA_ONTAP.8.2.1 true 8.2.1 Cluster Effective Version is Data ONTAP version 8.2.1 No action required. true true false false cifs.share.offline.caching true 8.2.0 Offline file Caching support in Data ONTAP Cluster mode You must disable Offline Caching on all the CIFS shares in the cluster before reverting. Use the command "cifs share modify { -offline-files !none } -offline-files none" to disable Offline Caching in the CIFS shares. false false true false ha_mode true 8.2.0 Support for HA and non-HA nodes No action required false false false false rdb.qm.fastbreak true 8.2.0 Enable Quorum Manager (QM) fast election and fast quorum breakdown No action required true true false false cifs.share.abe true 8.2.0 Access Based Enumeration support in Data ONTAP Cluster Mode. You must disable access based enumeration(ABE) on all the cifs shares in the cluster before reverting. Use the command "vserver cifs share properties remove -vserver * -share-name * -share-properties access-based-enumeration" to remove the access-based-enumeration share property from the cifs shares. false false true false ldap.client.use_start_tls true 8.2.1 ldap client use_start_tls feature You must disable the ldap client use_start_tls feature on all vservers. The following command will disable this feature on all vservers: "vserver services ldap client modify -vserver * -client-config * -use-start-tls false" false false false false cifs.security.use_start_tls_for_ad_ldap true 8.2.1 cifs security use_start_tls_for_ad_ldap feature You must disable the cifs security use_start_tls feature on all vservers. The following command will disable this feature on all vservers: "vserver cifs security modify -vserver * -use-start-tls-for-ad-ldap false" false false false true security.file_directory.policy true 8.2.0 FSecurity support in Data ONTAP Cluster mode You must disable file-directory security in the cluster by deleting all the file-directory polices before reverting. Use the command "vserver security file-directory policy delete" to delete policies. false false true false vserver.multiple.languages true 8.2.0 Support for Vservers to host multiple language volumes No action required true true true false offbox_vscan true 8.2.1 Offbox-vscan support in Data ONTAP Cluster mode You must disable vscan for all the data vservers in the cluster using the command "vserver vscan disable *". false false true false vscan.replication.mcc true 8.3.0 Configuration replication support for vscan feature. No Action Required true true false false san.fli.offline true 8.3.0 Support for Foreign LUN Import in Data ONTAP Cluster Mode SAN. Delete all Foreign-disk import relationships via the following commands: "lun import stop", "lun import delete", "storage disk modify -is-foreign false" false true true false san.fli.online true 8.3.1 Support for Foreign LUN Import (online) in Data ONTAP Cluster Mode SAN. Offline all LUNs in import relationship via following commands: "lun offline" false true true false volume.recovery_queue true 8.3.0 Support for recovering deleted volumes Volume recovery queue is not empty. Volumes must be purged from the queue or recovered. Contact technical support for assistance. false true true false kadmin.ipv6 true 8.3.0 Support for IPV6 support for kadmin service Delete all IPv6 addresses in NFS Kerberos realm configuration using the command "vserver nfs kerberos realm modify " or "vserver nfs kerberos realm delete" false true true false nameservices.disablesoa true 8.3.0 This capability is for the disablement of Send SOA No action required true true false false false file.operations true 8.3.0 Support for file move, file copy operations Complete or remove all pending file operations. Use the commands "file move show", "file copy show" to view pending file operations false true false false league true 8.3.0 Group management and authentication for cluster peering. Remove all league memberships using the "league delete" command. false false true false false crs.agent_v1 true 8.3.0 CRS Agent v.1. No action required false false true false false cps.configuration_v1 true 8.3.0 CPS Configuration Version 1. No action required false true false false false volume.sis.system_managed.capability true 8.3.0 Capability for the system to manage deduplication operations. Delete all policies that are not supported in the previous ONTAP version. false false false network.vserver.update true 8.3.0 Direct support for responding to vserver start and stop in the Logical Interface Manager (VifMgr). No action required. false false false false cluster_reboot_detection true 8.3.0 Cluster Reboot Detection No action required false false true false DATA_ONTAP.8.3.0 true 8.3.0 Cluster Effective Version is Data ONTAP version 8.3.0 No action required. true true false false volume.snapshot.policy.replication true 8.3.0 Capability to replicate the snapshot policies No action required. true true false false vserver.dr.object_replication true 8.3.0 Capability to replicate objects No action required. true true false false volume.flexclone.across_vservers true 9.0.0 Capability to create FlexClones across Vservers No action required. false true false false vserver.nameservices.nis true 8.3.0 Vserverized NIS No Action Required true true false false false vserver.libc.nameservices true 8.3.0 This capability is for the new Name Services features which are being added in FS.0. Features using this capability is libc nameservices. No Action Required true true false false false ndu_EaseOfUse true 8.3.0 Non-disruptive Upgrade automation Complete any upgrade in progress and then no longer use "cluster_image" commands. true true false false vldb.fs.enhancements true 8.3.0 The capability enables VLDB enhancements for Data ONTAP 8.3.0 No Action Required true true false false volume.move_fs true 8.3.0 Volume move enhancements for Fullsteam No volume moves can be in progress during revert. Either wait until they are complete or stop them using "volume move abort". false false true false volume.move_lb true 9.0.0 Volume move enhancements for Longboard No volume moves can be in progress during revert. Either wait until they are complete or stop them using "volume move abort". false false true false spatial_disk_naming true 8.3.0 Capability for spatial disk naming No Action Required true true false false DATA_ONTAP.8.2.4 true 8.2.4 Cluster Effective Version is Data ONTAP version 8.2.4 No action required. false true false false vserver.fs_management true 8.3.0 Vserver Mgmt FS Capability. No action required. false true true false vserver.fs1_management true 8.3.1 Vserver Mgmt FS.1 Capability. No action required. false true true false vserver.fs2_management true 8.3.2 Vserver Mgmt FS.2 Capability. Update role configurations so that they are compatible with releases earlier than Data ONTAP 8.3.2 using the (privilege: advanced) security login role prepare-to-downgrade command false false true false ipspaces true 8.3.0 IPspaces functionality Delete all the admin-created IPspaces in the cluster using "network ipspace delete" command. true true false false qtree.exports true 8.2.1 Capability for Qtree Exports No Action Required true true false false cshm.support_NX5596_CN1601_CN1610 true 8.2.1 Support for new switch models are added. Use the "system cluster-switch prepare-to-downgrade" command (privilege advanced). false true true false raid.shared_disk true 8.3.0 Yosemite Disk Sharing Feature Unjoin all nodes with root aggregate hosted on shared disks. Delete all data aggregates using shared disks in the cluster using the command "storage aggregate delete". Delete all shared storage pools in the cluster using the command "storage pool delete". true true false false cpeer.ipv6 true 8.3.0 Cluster Peering with IPv6. Delete all IPv6 peering relationships. false false false false volume.snapmirror_v3 true 8.3.0 The capability enables multiple SnapMirror features for 8.3.0 Remove all clone mirroring relationships, disable back-to-back updates, disable compression and remove all non-default throughput values from set-options. true false true false security.ssh true 8.2.1 OpenSSH server key exchange algorithms configuration. Change the SSH configurations of all Vservers and the cluster to the default settings for releases earlier than Data ONTAP 8.2.1 using the "security ssh prepare-to-downgrade" (privilege advanced) command. false false true false snmp.snmpv3.engineid_algorithm.uuid true 8.2.1 UUID-based Engine ID Generation Algorithm Use the "system snmp prepare-to-downgrade" command (privilege advanced). After downgrade or revert, delete and re-add all SNMPv3 users. Use the "security login delete -vserver * -username * -application snmp -authmethod usm" command to delete all SNMPv3 users. Use the "security login create -vserver <vserver-name> -username <user-name> -application snmp -authmethod usm -role <role-name>" command to re-add an SNMPv3 user. true true false false ssh.8.4.0 ssh.9.0.0 true 9.0.0 This capability is for the SSH config resiliency feature which are being added in LB.0. No action required. true true false false qos.autovolume true 8.3.0 Enable QoS AutoVolume workloads No Action Required false true false false qos.iops_and_throughput true 9.0.0 Enable specification of IOPS and throughput for max-throughput parameter in QoS policy-groups Modify existing QoS policy-groups for which both IOPS and throughput are defined for max-throughput parameter to specify either IOPS or throughput. Alternately, such policy-groups can be deleted. To list such policy-groups, run the command "qos policy-group show -max-throughput *{,}* ". To delete such policy-groups, run the (privilege: advanced) "qos policy-group delete { -max-throughput *{,}*} -force true" command. false true false false qos.min_throughput true 9.2.0 Enable min_throughput setting in QoS policy-groups Remove the min-throughput setting from all QoS policy-groups. Use "qos policy-group show -min-throughput >0" command to list the policy-groups with min-throughput set. Use "qos policy-group modify -min-throughput none -policy-group *" command to remove the min-throughput setting from all policy-groups. false true false false dnslb.ipv6 true 8.3.0 DNS load balancing for IPv6. No Action Required false true false false gpo true 8.3.0 Enable GPO. None. false false true false cifs.security.dac true 8.3 cifs security Dynamic Access Control (DAC) feature You must disable the CIFS DAC feature on all Vservers. The following command will disable this feature on all vservers: "vserver cifs options modify -vserver * -is-dac-enabled false." false false false false nfs.extended_groups true 8.3.0 More than 32 auxillary groups over AUTH_SYS and RPCSEC_GSS Disable the support for extended groups over AUTH_SYS on all Vservers using the command "nfs modify -vserver * -auth-sys-extended-groups disabled". Also, set the value for the maximum number of auxillary GIDs over all Vservers to 32 using the command "nfs modify -vserver * -extended-groups-limit 32". false false false false cifs.options 8.3.0 CIFS options added in FS. No Action Required true false cifs.restrict_anonymous true 8.2.2 Support for Restrict Anonymous option. Set CIFS options to values compatible with the downgrade version of Data ONTAP using the "vserver cifs options prepare-to-downgrade" command. false true true false cifs.directCopy true 8.3 cifs Direct-Copy Copy Offload feature You must disable the CIFS Direct-Copy feature on all Vservers using the following (privilege: advanced) command: "vserver cifs options modify -vserver * -is-copy-offload-direct-copy-enabled false". false true false true security.file_directory.fs.capability true 8.3.0 Enable file-directory FS capability. There 2 addition in policy task one is list of ntfs-sd can be applied and another is access-control used to control the behaviour of policy task, which is meant for storage-level access guard (SLAG) or file-directory level. No Action Required true true false false network.broadcast_domain_and_subnet true 8.3.0 Broadcast domain and subnet functionality No action required true true true false false cifs.character_mapping true 8.3.0 Enable cifs character mapping. Delete all the cifs character mapping configuration in the cluster using "cifs character-mapping delete -vserver * -volume *" command true true true false feature.usage.collection true 8.3.0 Enables feature usage collection No action required. true true false false nfs.port_modification true 8.3.0 Ports can be modified from their default values Revert all modified ports to their default values. Run these commands "nfs modify -vserver * -access false" then "nfs modify -vserver * -mountd-port 635 -nlm-port 4045 -nsm-port 4046 -rquotad-port 4049". false false false false snmp.option.enable.control_listeners true 8.3.0 Support snmp.enable option by turning off or turning on SNMP agent UDP listener. No Action Required. false true true false nfs.krb5i true 8.3.0 krb5i as a security flavor for export policy rules. None of the rorule, rwrule, and supervalue values within export-policy rules should contain krb5i as a supported security flavor. Display the rorule, rwrule, and superuser values for all the export policy rules across all Vservers using "vserver export-policy rule show -fields rorule,rwrule,superuser". Replace krb5i with krb5 as a security flavor for the rorule, rwrule, and superuser fields in the export policy rules across all Vservers with the "vserver export-policy rule modify" command. false false true false format_32bit true 8.2.1 Supports 32-bit volumes, aggregates and snapshots You must remove all 32-bit data from the cluster and disable the 32-bit aggregate support using "storage aggregate 64bit-upgrade 32bit-disable" command (privilege advanced) true false true true nfs.kerberos.realm.vserverization true 8.3.0 Capability to Vserverize NFS Kerberos Realms Kerberos realms on all Vservers must be deleted using the following command: "vserver nfs kerberos realm delete -vserver * -realm *". true true false false cifs.workgroup false 8.3.0 Unused capability Disable the capability using "capability disable -capabilities cifs.workgroup" command (privilege test). false false true true static_ll_route true 8.3.0 create static linklayer routes Delete all the admin-created static linklayer routes in the cluster using "network arp delete" and "network ndp static-neighbor delete" command. true true false false fpolicy.passthrough_read true 8.3.0 FPolicy passthrough-read adds support for reading the offline files without the FPolicy server restoring the files to primary storage. You must disable passthrough-read in all fpolicy policies before revert using the command "fpolicy policy modify * -is-passthrough-read-enabled false". false false true false fabric.data.collector.storage_device_monitoring true 8.3.0 Fabric Data Collector monitors storage devices (switches and bridges) by collecting fabric data over SNMP network. Remove all the storage devices that have been added for monitoring by using the "storage switch remove *" and "storage bridge remove *" commands. false false false false netbios.alias true 8.3.0 Support NetBIOS Aliases. You must delete all the NetBIOS aliases on all the Vservers using the command: vserver cifs server netbios-alias prepare-to-downgrade false false false false volume.move.sn1 true 8.2.1 Volume Move functionality enhancements. No volume moves can be in progress during revert. Either wait until they are complete or stop them using "volume move abort". false false true false web.ssl.fips.enable true 8.2.2 Option to enable FIPS 140-2 compliance in the web server. Disable FIPS. "system services web modify -ssl-fips-enabled false" false true false DATA_ONTAP.8.4.0 DATA_ONTAP.9.0.0 true 9.0.0 Cluster Effective Version is Data ONTAP version 9.0.0 No action required. true true false false DATA_ONTAP.8.4.1 DATA_ONTAP.9.1.0 true 9.1.0 Cluster Effective Version is Data ONTAP version 9.1.0 No action required. true true false false vserver.mds_capability true 9.0.0 Vserver MetaData Storage No action required. true true false false cifs.share.namespace.caching true 8.3.0 Namespace Caching support. You must disable namespace caching on all the cifs shares in the cluster before reverting. Use the command "vserver cifs share properties remove -share-properties namespace-caching -share-name *" to remove the namespace-caching share property from the cifs shares. false false true false cifs.search.short.names true 8.2.3 Search Short Names support You must disable the CIFS search short names option on all Vservers. To disable this feature on all Vservers use the (privilege: advanced) "vserver cifs options modify -vserver * -is-search-short-names-enabled false" command. false false true false cifs.fake.open true 8.3.0 CIFS Fake Open Support You must disable the CIFS fake open option on all Vservers. To disable this feature on all Vservers use the (privilege: advanced) "vserver cifs options modify -vserver * -is-fake-open-enabled false" command. false false true false web.system_manager true 8.3.0 The OnCommand System Manager web service No action required. true true false false DATA_ONTAP.8.2.2 true 8.2.2 Cluster Effective Version is Data ONTAP version 8.2.2 No action required. true true false false DATA_ONTAP.8.2.3 true 8.2.3 Cluster Effective Version is Data ONTAP version 8.2.3 No action required. true true false false vserver.operational.enabled true 8.3.0 To determine Vserver Operational State. No action required. false true false false volume.snapmirror_v4 true 9.0.0 The capability enables multiple SnapMirror features for 9.0.0 Remove all SnapMirror consistency group relationships. true false true false cifs.symlink.mapping.limit true 8.2.3 CIFS Max Symlink Mapping Limit There are more than 2048 symbol link mappings defined in the system. You must reduce the symlink count to 2048 or less, in order to perform the revert. Use the "vserver cifs symlink delete -vserver <vserver-name> -unix-path <unix-path>" command to delete unneeded symlinks. true false true false security.certificate.subtype true 8.3.1 Support for certificate subtype in security certificate management. Remove certificates with certificate subtype or system internal certificate of all Vservers and the cluster to the default settings for releases earlier than Data ONTAP 8.3.1 using the "security certificate prepare-to-downgrade" (privilege advanced) command. false false true false cluster_peer_ipspaces true 8.3.1 The capability allows cluster peering to work with multiple IPspaces. All cluster peer relationships must use only the Default IPspace. To move all cluster peer relationships to the Default IPspace, use the "cluster peer modify * -ipspace Default" command. false false true false DATA_ONTAP.8.3.0I1 true 8.3.0 Cluster Effective Version is Data ONTAP version 8.3.0 Internal Patch 1 No action required. true true false false cluster.quorum.warnings true 8.2.3 The capability allows cluster quorum resiliency services. Disable cluster quorum warnings using the (privilege: advanced) "cluster quorum-service options modify -ignore-quorum-warning-confirmations true" command true false true false DATA_ONTAP.8.3.1 true 8.3.1 Cluster Effective Version is Data ONTAP version 8.3.1 No action required. true false false raid.tec true 9.0.0 RAID TEC allows using three parity disks to protect from three disk failures in a RAID group. This node contains aggregates having RAID groups of RAID type raid_tec. To continue reverting, modify aggregates having RAID groups of RAID type raid_tec in the system or delete them. RAID type raid_tec is supported only on Data ONTAP 9.0.0 or later. Command to list aggregates: storage aggregate show-status Command to modify the RAID type of raid_tec aggregates to raid_dp: storage aggregate modify {-raidtype raid_tec} -raidtype raid_dp Command to modify the RAID type of mixed_raid_type aggregates with raid_tec HDD tier to raid_dp: storage aggregate modify -aggregate <aggregate_name> -raidtype raid_dp -disktype <HDD disk type> Command to modify the RAID type of mixed_raid_type aggregates with raid_tec SSD tier to raid_dp: storage aggregate modify -aggregate <aggregate_name> -raidtype raid_dp -disktype SSD; Note: If converting a RAID-TEC aggregate to RAID-DP exceeds the maximum RAID group size of the RAID-DP, override the limit by setting the raid.raid_dp.raidsize.override option to "on" under nodeshell. Use that option only when the revert is temporary. Command to turn on the raid.raid_dp.raidsize.override option: run local "options raid.raid_dp.raidsize.override on" Command to delete aggregates: storage aggregate delete true true false false cifs.ontap.8.3.1 true 8.3.1 CIFS 8.3.1 related features Disable CIFS features introduced in Data ONTAP 8.3.1 using the command (privilege: advanced) "vserver cifs prepare-to-downgrade -disable-feature-set 8.3.1". true false true false cifs.8.3.2 true 8.3.2 CIFS 8.3.2 related features Disable CIFS features introduced in Data ONTAP 8.3.2 using the command (privilege: advanced) "vserver cifs prepare-to-downgrade -disable-feature-set 8.3.2". true false true false http.ontap.8.3.2 true 8.3.2 HTTP feature Disable HTTP feature introduced in Data ONTAP 8.3.2 using the command (privilege: diagnostic) "vserver http prepare-to-downgrade". false false true false cifs.8.4.0 9.0.0 CIFS 9.0.0 related features Disable CIFS features introduced in Data ONTAP 9.0.0 using the (privilege: advanced) "vserver cifs prepare-to-downgrade -disable-feature-set 9.0.0" command. cifs.9.0.0 true false true false cifs.8.4.1 9.1.0 CIFS 9.1.0 related features Disable CIFS features introduced in Data ONTAP 9.1.0 using the (privilege: advanced) "vserver cifs prepare-to-downgrade -disable-feature-set 9.1.0" command. cifs.9.1.0 true false true false cifs.9.2.0 9.2.0 CIFS 9.2.0 related features Disable CIFS features introduced in Data ONTAP 9.2.0 using the command (privilege: advanced) "vserver cifs prepare-to-downgrade -disable-feature-set 9.2.0". true false true false cifs.lugV2 9.0.0 CIFS LUG schema changes As of now no action required. true false true false vserver.dr true 8.3.1 SVMDR feature Delete all the Vserver DR relationships using the "snapmirror delete" command or release all the Vserver DR relationships using the "snapmirror release" command. Also, convert all the dp-destination Vservers to default using the "snapmirror break" command or delete the dp-destination Vservers using "vserver delete" command. false false true false nameservices.ddns true 8.3.1 This capability is for the Name Service feature to support Dynamic DNS Update You must disable the Dynamic DNS Update feature in the cluster before downgrading using the (privilege: advanced) "vserver services name-service dns dynamic-update prepare-to-downgrade" command. false false true false security.login.password.enhancements true 8.3.1 This capability is for the password infrastructure support to display unsuccessful login attempts using MOTD Disable the MOTD feature that prints unsuccessful login attempts using the (privilege: advanced) "security login password-prepare-to-downgrade -disable-feature-set 8.3.1" command. false true true false remote.admin.authentication true 8.3.1 Remote authentication for cluster admin through LDAP or NIS Disable the remote admin authentication feature before downgrading by using the (privilege: advanced) "vserver services name-service remote-admin-auth prepare-to-downgrade" command. true false false false peered.lun.copy true 8.3.1 The capability allows a vserver administrator to copy LUNs over from peered Vservers. Remove "lun-copy" application from all the Vserver peer relationships using "vserver peer delete" or "vserver peer modify" command. false false false false san.mcc.lif.offline.on.drpartner true 8.3.1 Support for marking SAN LIF "offline" if placed on the DR auxiliary partner as part of LIF placement in a MetroCluster environment. You must disable the MetroCluster feature where a SAN LIF can be marked "offline" on a DR auxiliary partner as part of LIF placement in the cluster. Run the "vserver san prepare-to-downgrade -feature-set 8.3.1" command. false false true false nfsv3.dos.support true 8.2.3 NFSv3 MS-DOS client support Disable NFSv3 MS-DOS Client Support on all Vservers using (privilege: advanced) "vserver nfs prepare-for-v3-ms-dos-client-downgrade" false true false true aggregate.encryption true 8.3.1 Aggregate encryption Remove all encrypted aggregates in the cluster using the "storage aggregate delete { -is-encrypted true }" command. false false true false volume.transition.active true 8.3.2 Support mapped LUNs in actively transitioning volumes. Verify that there is not an active transition from 7-Mode to clustered Data ONTAP by using the (privilege: advanced) "volume transition-prepare-to-downgrade" command. true false false false mhost.cft.precommit.active true 8.3.2 Prevent downgrade if Copy-Free Transition is in pre-commit phase. Cluster either contain HA pair nodes in Copy-Free Transition pre-commit phase or contain Copy-Free Transition aggregates which are either not committed or rolled back. Use Copy-Free Transition pre-commit command set to determine and end active pre-commit session, if any. Use "storage transition aggregates show-status" diagnostic command to determine transition state of the aggregates in the cluster. If there are aggregates which are either not committed or rolled back, follow appropriate Copy-Free Transition workflow to progress. false false true false volume.sched_style true 9.0.0 Scheduled Snapshot copy ordinal naming feature for clustered Data ONTAP. Disable the scheduled Snapshot copy ordinal naming style feature using the (privilege: advanced) "volume schedule-style prepare-to-downgrade" command. false false false false dense_adaptive_compression_cluster true 8.3.1 Capability to enable adaptive compression at the cluster level. Before downgrading, run the "volume efficiency prepare-to-downgrade -disable-feature-set 8.3.1" command. This command also needs to be executed on any peer clusters being used for MetroCluster or Vserver DR. false false false dense_inline_dedupe_cluster true 8.3.2 Capability to enable inline dedupe at the cluster level. Before downgrading, run the "volume efficiency prepare-to-downgrade -disable-feature-set 8.3.2" command. This command also needs to be executed on any peer clusters being used for MetroCluster or Vserver DR. false false false fpolicy.ontap.8.4.0 fpolicy.ontap.9.0.0 true 9.0.0 FPolicy 9.0.0 related features. Disable FPolicy features introduced in Data ONTAP 9.0.0 using the (privilege: advanced) "vserver fpolicy prepare-to-downgrade -disable-feature-set 9.0.0" command. true false false false DATA_ONTAP.8.3.2 true 8.3.2 Cluster Effective Version is Data ONTAP version 8.3.2. No action required. true false false security.login.password.sha2_support true 9.0.0 Support for password encryption compatible with releases earlier than Data ONTAP 9.0.0 Reset the system administrator password with encryption type supported by releases earlier than Data ONTAP 9.0.0 using the (privilege: advanced) "security login password-prepare-to-downgrade -disable-feature-set 9.0.0" command. false true false security.openssh.version true 9.0.0 OpenSSH server ciphers, key exchange algorithms, and MAC algorithms configuration. Change the SSH configurations of all Vservers and the cluster to the default settings for releases earlier than ONTAP 9.0 using the (privilege advanced) "security ssh prepare-to-downgrade" command. true false true false security.login.publickey true 9.0.0 OpenSSH server new digital key formats. Remove the new public key formats "ecdsa" and "ed25519" and the users using them for releases earlier than Data ONTAP 9.0.0 using "security login publickey prepare-to-downgrade" (privilege advanced) command. If you do not want the users to be deleted, change their public key formats to "rsa" or "dsa" using "security login publickey modify" command. true false true false cluster_peer_encryption true 9.0.0 Ability to encrypt data flowing between two clusters. No action required. true false false nsswitch.group.auth true 9.0.0 Capability for ns-switch group authentication. Delete all ns-switch groups and disable nsswitch group authentication feature before downgrading using the (privilege: advanced) "security login ns-switch group-authentication prepare-to-downgrade" command. true false true false vserver.dr.msid_preserve true 8.3.2 SVMDR feature Delete all MSID preserving Vserver DR relationships using the "snapmirror delete" command. Use the command "snapmirror show -msid-preserve true" to identify such relationships. false false true false nameservice.dns.tld true 8.2.4 Enable DNS option to stop TLD (shortname) lookup You must disable the DNS TLD option on all Vservers. To disable this feature on all Vservers use the (privilege: advanced) "vserver services dns modify -vserver * -is-tld-query-enabled true" command false false true false nameservice.dns.insecure true 9.0.0 DNS options to match source address on the reply packet with the name-server address to which the reqest was sent and to match query sections of query and response packets. You must enable the DNS compare source IP address and DNS compare queries options on all Vservers. To enable this feature on all Vservers use the (privilege: advanced) "vserver services dns modify -vserver * -require-source-address-match true -require-packet-query-match true" command false false true false security.config.fips true 9.0.0 The capability supports enabling/disabling FIPS security mode in the cluster. No action required. false true true false cpeer.local.name true 9.0.0 Ability to create a local name for a remote cluster. No action required. false true false false security.login.password_policies true 9.0.0 Ability to configure password policies and offer protection of user accounts. No action required true true false false qos.12k_policy_groups_provisioning true 8.3.2 Capability to enable QoS to scale up to 12000 user-defined policy groups and 12000 user-defined workloads. Ensure there are no more than 3500 qos policy-groups and 10000 workloads. To remove qos policy-groups and assigned workloads run the (privilege: advanced) "qos policy-group delete -policy-group <name> -force true" command. false false false false DATA_ONTAP.8.3.3 true 8.3.3 Cluster Effective Version is Data ONTAP version 8.3.3 No action required. true true false false vpeer.local.name true 9.0.0 Ability to create a local name for a peer Vserver No action required. false true false false filerep.fips_compliant_hash true 9.0.0 Ability to use an advanced hashing algorithm to verify file transfers within the cluster No action required true true false false DATA_ONTAP.9.0.0 true 9.0.0 Cluster Effective Version is Data ONTAP version 9.0.0 No action required. false false false false DATA_ONTAP.9.2.0 true 9.2.0 Cluster Effective Version is Data ONTAP version 9.2.0 No action required. false false false false flexgroup 9.1.0 FlexGroup support Delete all of the FlexGroups from the cluster. View FlexGroups using the "volume show -is-flexgroup true" command. Remove FlexGroups using the "set advanced ; volume offline -vserver <name> -volume <name> ; volume delete -vserver <name> -volume <name> -force true" command. false true aps.provision true 9.2.0 Ability to automatically provision storage using the automatic provisioning service Application provisioning jobs are in progress. Wait for these jobs to complete and wait for their results to be cleaned up. The progress of application provisioning jobs can be seen using the "job show -category APS" command. false false false false appdm.rdb true 9.2.0 Application Granular Data Management Feature Delete all applications from the cluster by removing all of the volumes from each application. The volumes and the data they contain will not be affected, but they can no longer be managed as applications. View applications using the "application show" command. Remove applications using the (privilege: advanced) "application volume remove -volume *" command. false false false false jobmgr.schedule_data_vserver true 9.2.0 Vserverize the schedule_data table. No action required true true false false composite_aggregate FabricPool true 9.2.0 This capability enables the use of FabricPools in a cluster. Move all volumes in all FabricPools to other aggregates. Delete all FabricPools using the "storage aggregate delete" command and then delete all the object store configuration using "storage aggregate object-store config delete" command. true false false false volume.encryption 9.1.0 Volume encryption feature Disable the volume encryption feature using the (privilege: advanced) "volume encryption prepare-to-downgrade" command. false false true false onboard.keymanager.v2.capability true 9.1.0 Onboard keymanager 9.1.0 related features Disable Onboard keymanager features introduced in DATA ONTAP 9.1.0 using the (privilege: advanced) "security key-manager prepare-to-downgrade" command. true false true false volume.snapmirror_v5 true 9.1.0 The capability enables multiple SnapMirror features for 9.1.0 Remove all FlexGroup relationships and relationships between Data ONTAP and AltaVault. Then disable the volume.snapmirror_V5 capability using the (privilege: advanced) "snapmirror prepare-to-downgrade -disable-feature-set 9.1.0" command. true false true false volume.snapmirror_v6 true 9.2.0 The capability enables multiple SnapMirror features for 9.2.0 No action required. true false true false volume.snapmirror_v7 true 9.3.0 The capability enables multiple SnapMirror features for 9.3.0 Remove all relationships between Data ONTAP and SolidFire, and restore relationships between Data ONTAP and AltaVault. One or more FlexGroups which are part of a SnapMirror relationship are replicated with Logical Directory Mode enabled. For all such FlexGroups, run a snapshot restore to a snapshot that was created prior to Data ONTAP 9.3.0 release. true false true false vserver.migrate true 9.2.0 The capability enables SVM Migrate feature. Abort and cleanup all ongoing SVM Migrate operations in the cluster. false false true false iscsi.lif.simple.configuration true 9.2.0 The capability enables a simpler configuration model for iSCSI LIFs. No action required. true true true false unsupported.cluster.switches true 9.1.0 The capability enables proper cluster switch support for 9.1.0 Remove all unsupported cluster switches by using the command "system cluster-switch prepare-to-downgrade" true false true false snaplock_v2 9.1.0 The capability enables SnapLock support on AFF and Hybrid aggregates for Data ONTAP 9.1.0 Disable SnapLock features introduced in DATA ONTAP 9.1.0 using the (privilege: advanced) "snaplock prepare-to-downgrade" command. false false true false nfs.ontap.9.2.0 true 9.2.0 NFS configurations added in Data ONTAP 9.2.0 Remove NFS configurations added in Data ONTAP 9.2.0 using the (privilege: advanced) "vserver nfs prepare-to-downgrade -disable-feature-set 9.2.0" command. true false false false snmp.snmpv3.stronger.ciphers true 9.2.0 Cluster Effective Version is Data ONTAP version 9.2.0 No action required. false false false false security.certificate.default.bundle.load true 9.2.0 The capability enables applications to use the default root certificates bundle for TLS communications No action required. true true true false DATA_ONTAP.9.1.0.RC2 DATA_ONTAP.9.1.0.RC2 true 9.1.0.RC2 Cluster Effective Version is Data ONTAP version 9.1.0 RC2 No action required. true true false false jobmgr.temp.nightly.schedule_data_owner true 9.2.0 This capability will be used temporarily for vsim nightly updates. Populate the owner column on the schedule_data table. No action required true true false false snaplock.volume.append.mode true 9.3.0 The capability enables support for SnapLock volume append mode Disable SnapLock volume append mode feature using the (privilege: advanced) "volume snaplock prepare-to-downgrade" command. false false true false DATA_ONTAP.9.3.0 true 9.3.0 Cluster Effective Version is Data ONTAP version 9.3.0 No action required. true true false false san.iscsi.endpoint_isolation true 9.3.0 iSCSI Endpoint Isolation Disable iSCSI endpoint isolation functionality by using the (privilege: advanced) "vserver iscsi security prepare-to-downgrade" command. true false false false legacy.kmip.client true 9.2.0 Legacy KMIP client which will become obsolete post Data ONTAP version 9.2.0 You must un-configure external key management on the cluster using the (privilege: advanced) "security key-manager delete-kmip-config" command before upgrade to Data ONTAP 9.3.0. You can re-configure external key management by using "security key-manager setup" command after successful upgrade of all nodes to Data ONTAP 9.3.0. true true true false NsCache.FT true 9.3.0 This capability enables Name Service Caching feature. No action required. false false true false qos.adaptive true 9.3.0 Enable QoS adaptive-policy-groups Remove existing adaptive QoS configuration by using the following command sequence: "volume modify { -type RW,DP } -qos-adaptive-policy-group none", "qos adaptive-policy-group delete -policy-group !extreme,!performance,!value” false true false false fgconversion_flexvol true 9.3.0 This capability enables the FlexGroup conversion feature. No action required false false false false Cache_Mirror true 9.3.0 This capability enables Cache Mirror. No action required. true true false false aps.provision_v2 true 9.3.0 Ability to automatically provision storage using the automatic provisioning service version 2 Convert Adaptive QoS policies associated with application volumes to traditional QoS policies by running the (advanced) "application provisioning revert-volume-qos -vserver * -volume *" command. true true false appdm_mcc true 9.3.0 Application Granular Data Management Feature using remote sync aggerates Delete all remote sync applications from the cluster by first removing all volumes from the applications. The volumes and the data they contain will not be affected. However, they will not be able to be managed as applications. To identify the remote sync applications, use the "application show-detail -remote-RPO zero" command. Finally, remove the remote sync applications using the (privilege: advanced) "application volume remove -application <name> -volume *" command. false false false false dense_auto_policy_cluster true 9.3.0 Capability to enable auto policy by default on volumes during upgrade at the cluster level. Run the "volume efficiency prepare-to-downgrade -disable-feature-set 9.3.0" command. This command also needs to be executed on any peer clusters being used for MetroCluster or Vserver DR. If there are active sis operations on one or more volumes then run the "volume efficiency stop -all true -vserver * -volume *" command first to stop storage efficiency operations on all volumes in the cluster, otherwise this command will fail. false true false false