Copyright (c)  2012 Brocade Communications Systems, Inc.
All rights reserved
-------------------------------------------------------

Brocade Driver/Installation/Uninstallation Procedure on ESXi
-----------------------------------------------------------------------
The brocade driver package comes as a tar gz archive:
brocade_driver_esx50_v3-2-1-0.tar.gz

PREREQUISITES (ESXi 4.1)
-------------
-   vSphere Management Assistant (vMA), can be downloaded from VMware site.
    Once vMA is downloaded please refer to "vSphere Management Assistant Guide"
    on how to  deploy vMA.
-	Put the ESXi server (where the driver is to be installed) in maintenance
    mode using vSphere client. Using the vSphere Client, right click ESXi and
    choose the option Enter Maintenance Mode.
-   vMA commands should be run on as root
    # sudo -s
-	Add the ESXi server IP Address where driver needs to be installed to vMA
    # vifp addserver <ESXi server's IP Address>
-	Run the command "vifp listservers" to make sure that the added ESXi server listed in the vMA
-	In the vMA terminal, execute the following commands:
    # vifpinit <ESXi server's IP Address>

INSTALL SOFTWARE (ESXi 4.1)
----------------
-   Copy the Brocade driver package to the vMA and untar it
    tar zxf brocade_driver_esx50_v3-2-1-0.tar.gz
-   Run the install script
    # ./brocade_install_esxi.sh
-	After host updates successfully, exit from maintenance mode. 
    Using the vSphere Client, right click ESXi and choose the option Exit Maintenance Mode.
-   Reboot ESXi server.
-   After ESXi server reboot is done, run the following command to make sure
    the drivers are installed. The Brocade drivers should show up in the list
    # vihostupdate -q

UNINSTALL SOFTWARE (4.1)
------------------
-   With the ESXi server in maintenance mode, run the install script from vMA
    # ./brocade_install_esxi.sh -u
-   After host updates successfully, exit from maintenance mode.
    Using the vSphere Client, right click ESXi and choose the option Exit Maintenance Mode.
-   Reboot ESXi server.
-   After ESXi server reboot is done, run the following command to make sure
    the drivers are not installed. The Brocade drivers should not show up in the list
    # vihostupdate -q

INSTALL SOFTWARE (ESXi 5.0)
----------------
-   Copy the Brocade driver package to the server/host and untar it
    tar zxf brocade_driver_esx50_v3-2-1-0.tar.gz
-   Run the install script
    # ./brocade_install_esxi.sh
-   Reboot ESXi server.
-   After ESXi server reboot is done, run the following command to make sure
    the drivers are installed. The Brocade drivers should show up in the list
    # vmkload_mod -l | grep bfa
    # vmkload_mod -l | grep bna

UNINSTALL SOFTWARE (ESXi 5.0)
------------------
-   Run the following script from the host/server
    # ./brocade_install_esxi.sh -u
-   Reboot ESXi server.
-   After the server reboots, please make sure that the Brocade drivers
    are not loaded using the following commands:
    # vmkload_mod -l | grep bfa
    # vmkload_mod -l | grep bna
