###################################################################### DELL(TM) UPDATE PACKAGES for Microsoft(R) Windows(R) Readme ###################################################################### NOTE: This readme provides information about Dell Update Packages. This file contains updated information for your "Dell Update Packages for Microsoft Windows Operating System User's Guide" and any other technical documentation included with the Dell Update Packages for Windows operating systems. Dell Update Packages offer new levels of ease and flexibility for updating the system software on Dell PowerEdge(TM) systems. Update Packages are available for the following software components: * System BIOS * System firmware, also known as the Embedded Systems Management (ESM) firmware * Dell Remote Access Controller (DRAC) firmware, which also include Embedded Remote Access (ERA) firmware * PowerEdge Expandable RAID Controller (PERC) firmware and driver * Cost-Effective RAID Controller (CERC) firmware and driver * Dell PowerVault(TM) 220S/221S firmware * IDE Controller drivers * Baseboard Management Controller (BMC) firmware * SCSI Backplane (BP) firmware ###################################################################### CONTENTS ###################################################################### * CRITICALITY * MINIMUM REQUIREMENTS * UPDATE PACKAGES: SUPPORTED COMPONENTS * KNOWN ISSUES ###################################################################### CRITICALITY ###################################################################### 2 — Recommended Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers, and software). ###################################################################### MINIMUM REQUIREMENTS ###################################################################### The Update Packages support Dell systems running the following Windows operating systems: * Windows 2000 Server (includes Windows 2000 Server, Windows 2000 Advanced Server) SP1 or later, and Windows Small Business Server [SBS] 2000, SP1 or later * Windows Server(TM) 2003 (includes Web, Standard, and Enterprise Editions) and Windows SBS 2003 ###################################################################### UPDATE PACKAGES: SUPPORTED COMPONENTS ###################################################################### This release of Update Packages supports updates to the devices listed in the following table. Component Type Supported Components ---------------------------------------------------------------------- BIOS BIOS ---------------------------------------------------------------------- ESM firmware ESM2, ESM3, ESM4 ---------------------------------------------------------------------- DRAC firmware DRAC 4, DRAC II, DRAC III, DRAC III/XT, ERA, ERA/O ---------------------------------------------------------------------- RAID firmware PERC 2, PERC 2/Si, PERC 3/Di, PERC 4/Di, PERC 4e/Di, PERC 3/DC, PERC 3/DCL, PERC 3/SC, PERC 3/Si, PERC 4e/DC, PERC 4e/Si, PERC 3/QC, PERC 4/DC, PERC 4/SC, CERC/SATA 6 channel ---------------------------------------------------------------------- RAID drivers PERC 2, PERC 2/DC, PERC 2/SC, PERC 2/Si, PERC 3/Si, PERC 4e/Si, PERC 3/Di, PERC 4e/Di, PERC 3/DC, PERC 3/DCL, PERC 3/SC, PERC 3/QC, PERC 4/DC, PERC 4/im, PERC 4/SC, PERC 4e/DC, PERC 4/DI CERC/SATA 6 channel ---------------------------------------------------------------------- IDE controllers CERC ATA 100 (firmware and drivers) and SI680A drivers, CERC/SATA 2S ---------------------------------------------------------------------- BMC firmware BMC ---------------------------------------------------------------------- Backplane firmware BP ---------------------------------------------------------------------- ###################################################################### KNOWN ISSUES ###################################################################### * If you copy Update Packages from Dell OpenManage Server Update Utility (SUU) to a pathname that contains spaces, the Update Packages may fail. To resolve this issue, remove the spaces from the pathname and rerun the update. (143985) * If you install Dell OpenManage software while the RAC firmware update is running, the Update Package or SUU will not upgrade the firmware. (144013) * The PowerVault update procedure requires the RAID controller to be in a known good state. If a problem occurs with the RAID controller during the update procedure, the Update Packages cannot communicate with the PowerVault system, inventory its firmware version, or perform the update. (138462) * Do not run PERC update packages if the controller is in use by other applications. The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade. * Adaptec PERC firmware update packages may fail to update to version 2.8 and 2.7 in certain cases. It may not be possible to flash some ROMB controllers to version 2.8 firmware by using the operating system—specific Dell Update Packages. If this issue arises, the only solution is to reflash the ROMB through the bootable floppy diskette. NOTE: If this issue is present, you will also be unable to back- flash to version 2.7.x using an Adaptec firmware update package after you upgrade to version 2.8x using a floppy diskette. * PERC update packages may fail if other activities, such as a consistency check or background initialization, are running on the controller. Ensure that such activities are not in progress before you run the update package. * BIOS update requires the BIOS image to be present in a contiguous physical memory in the lower 1MB physical RAM space. If there is not sufficient contiguous physical memory available to fit the BIOS image because of physical memory fragmentation done by the memory manager in the operating system, the Dell Update Package for BIOS update may fail. In this case, BIOS could be updated using a floppy diskette, by running the Dell Update Package after adding more memory, or by running the Dell Update Package immediately after a reboot. * Stop all input/output to the PowerVault 220S/221S before running the PowerVault 220S/221S firmware update package. * Before performing the update on the PowerVault 220S/221S enclosure, note that the PowerVault 220S/221S firmware update packages will stop the Dell OpenManage(TM) Array Manager and the Dell OpenManage Server Administrator Storage Management Service applications if they are running. The cancellation prevents these services from sending SCSI commands to the PowerVault 220S/221S systems during the firmware update. After the update is performed, these services are restored to their original status before running the package. * If the PowerVault 220S/221S firmware update is interrupted before successful completion, it will show the PowerVault 220S/221S Kernel version as a PowerVault 220S/221S Firmware version the next time the PowerVault 220S/221S firmware update package is run. * When both cluster nodes are in active mode, the PowerVault 220S/221S firmware download is not supported and may cause unknown effects. The PowerVault 220S/221S firmware update should be run only from the active node of an Active/Passive cluster. * The remote access controller firmware update uses FTP protocol to perform the update commands. If a firewall is installed in the system, it may cause the firmware update to fail. * Adaptec firmware update packages may fail if they are run remotely through terminal services. * If you have a PowerEdge server with 4GB of system memory installed and attempt to update the BIOS, the system might hang on the BIOS post screen[mlb]. The system must be manually rebooted. Note that the BIOS will not be upgraded. To perform the BIOS update, use the diskette flash method or temporarily remove or add some memory. * Dell Update Packages for the DRAC III, ERA, ERA/O, and DRAC III/XT remote access controller devices require the following services to successfully inventory and update: Telephony Remote Access Connection Manager The message, "Inventory Collection Failed", will be displayed and the update package will exit if these services are not running. * The IPMI driver of the Hardware Management component of Windows Server 2003 R2 is not supported by BMC, BP and ESM Dell Update Packages. If this component is installed, uninstall the component before executing the Dell Update Package. If the Intel "IMB Driver" device is installed, uninstall that device from the Device Manager before executing the Dell Update Package. ###################################################################### Information in this document is subject to change without notice. (C) 2005 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: "Dell", "Dell OpenManage", "PowerVault", and "PowerEdge" are trademarks of Dell Inc.; "Windows Server" is a trademark and "Microsoft" and "Windows" are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. August 2005