###################################################################### DELL(TM) UPDATE PACKAGES FOR RED HAT(R) ENTERPRISE LINUX README ###################################################################### NOTE: This readme provides information about Dell Update Packages. This document contains updated information for your "Dell Update Packages for Red Hat Linux User's Guide" and any other technical documentation included with the Dell Update Packages for Red Hat Enterprise Linux. Dell Update Packages offer new levels of ease and flexibility for updating the system software on Dell PowerEdge(TM) systems. Update Packages are available for the following software components: * System BIOS * System firmware, also known as the Embedded Systems Management (ESM) firmware * PowerEdge Expandable RAID Controller (PERC) firmware * Dell PowerVault(TM) 220S/221S firmware * Dell Remote Access Controller (DRAC) firmware, which also include Embedded Remote Access (ERA) firmware * Baseboard Management Controller (BMC) firmware * SCSI Backplane (BP) firmware ###################################################################### TABLE OF CONTENTS ###################################################################### This document contains the following sections: * Criticality * Minimum Requirements * Update Packages Component and System Compatibility * Known Issues ###################################################################### CRITICALITY ###################################################################### 2 — Recommended Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers, and software). ###################################################################### MINIMUM REQUIREMENTS ###################################################################### Operating System Software Requirements: * Red Hat Enterprise Linux version 2.1 (AS, ES) for Intel(R) x86 with a Red Hat officially supported kernel in the 2.4.9 series * Red Hat Enterprise Linux version 3 (AS, ES, WS) for Intel x86 with a Red Hat officially supported kernel in the 2.4.21 series * Red Hat Enterprise Linux version 3 (AS, ES, WS) for Intel Extended Memory 64 Technology (EM64T) with a Red Hat officially supported kernel * Red Hat Enterprise Linux version 4 (AS, ES, WS) for Intel x86 with a Red Hat officially supported kernel * Red Hat Enterprise Linux version 4 (AS, ES, WS) for Intel EM64T with a Red Hat officially supported kernel ###################################################################### UPDATE PACKAGES COMPONENT AND SYSTEM COMPATIBILITY ###################################################################### Update Packages currently do not support every system component type. Dell will continue to make Update Packages available on additional devices in future releases. This release of Update Packages supports updates to the devices listed in the following table. Component Type Supported Components ---------------------------------------------------------------------- BIOS BIOS ---------------------------------------------------------------------- ESM firmware ESM3, ESM4 ---------------------------------------------------------------------- DRAC firmware DRAC 4, DRAC III, DRAC III/XT, ERA, ERA/O ---------------------------------------------------------------------- RAID firmware PERC 2, PERC 2/Si, PERC 3/Di, PERC 4/Di, PERC 4e/Di, PERC 3/DC, PERC 3/DCL, PERC 3/SC, PERC 3/Si, PERC 4e/Si, PERC 3/QC, PERC 4/DC, PERC 4/SC, CERC/SATA 6 channel ---------------------------------------------------------------------- BMC firmware BMC ---------------------------------------------------------------------- Backplane firmware BP ---------------------------------------------------------------------- ###################################################################### KNOWN ISSUES ###################################################################### * If you copy Update Packages to a pathname that contains spaces, the Update Packages may fail. To resolve this issue, remove the spaces from the pathname and rerun the Update Package. (143985) * If you install Dell OpenManage software while the RAC firmware update is running, the Update Package will not upgrade the firmware. (144013) * The PowerVault update procedure requires the RAID controller to be in a known good state. If a problem occurs with the RAID controller during the update procedure, the Update Packages cannot communicate with the PowerVault system, inventory its firmware version, or perform the update. (138462) * Do not run PERC update packages if the controller is in use by other applications. The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade. * Before performing the update on the RAID controller, note that the Adaptec PERC update packages stop the Dell OpenManage(TM) Array Manager and Dell OpenManage Server Administrator Storage Management Service applications if they are running. Since these services reserve the controller, the update would fail if they were running. After the update is performed, these services are restored to their original status. * Adaptec PERC firmware update packages may fail to update to version 2.8 and 2.7 in certain cases. It may not be possible to flash some ROMB controllers to version 2.8 firmware by using the operating system—specific Dell Update Packages. If this issue arises, the only solution is to reflash the ROMB through the bootable floppy diskette. NOTE: If this issue is present, you will also be unable to back- flash to version 2.7.1, after you upgrade to version 2.8. * PERC update packages may fail if other activities, such as a consistency check or background initialization, are running on the controller. Ensure that such activities are not in progress before running the update package. * PERC 4 update packages may fail if the system has an older version of the Megaraid controller driver installed. To correct the problem, update the Megaraid controller driver to version 2.20.4.5 or later. * BIOS update requires the BIOS image to be present in a contiguous physical memory in the lower 1MB physical RAM space. If there is insufficient contiguous physical memory available to fit the BIOS image due to physical memory fragmentation by the memory manager in the operating system, the Dell Update Package for BIOS update may fail. In this instance, the BIOS can be updated by the floppy diskette method, by running the Dell Update Package after adding more memory, or by running the Dell Update Package immediately after a reboot. * BIOS update may issue the following kernel messages on the console and in "/var/log/messages": dcd***: disagrees about version of symbol struct_module dcd***: Unknown symbol get_user_size dcd***: Unknown symbol put_user_size Ignore these messages because they do not refer to errors in BIOS update. * Red Hat Enterprise Linux version 2.1/3.0 servers running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running the PERC firmware update packages. To stop the Server Administrator service, run "omconfig system webserver action=stop" To start the Server Administrator service, run "omconfig system webserver action=start" To stop the Server Administrator Storage Management Service, run "/etc/init.d/dataeng stop" To start the Server Administrator Storage Management Service, run "/etc/init.d/dataeng start" * Server Administrator does not support enabling IPMI services while its services are active. If a system is put into this state, followed by de-activation of the IPMI services and execution of an ESM Dell Update Package, the Update Package will fail to update. To recover from this scenario, stop the IPMI services, restart the Server Administrator services (as documented in the Server Administrator documentation), then re-execute the Update Package. * If the following error occurs,: "Error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory" you must install the compatibility libraries from "www.redhat.com" or from the Red Hat CD. To install the compatibility libraries, use the following command: "RPM -ih compat-libstdc++-296-2.96-132.7.2" * The PowerVault 220S/221S update package on Red Hat Enterprise Linux may display some of the debug messages generated by the operating system. * Stop all input/output to the PowerVault 220S/221S before running the PowerVault 220S/221S firmware update package. * Before performing the update on the PowerVault 220S/221S enclosure, note that the PowerVault 220S/221S firmware update packages stop the Array Manager and Server Administrator Storage Management Service applications if they are running. The cancellation prevents these services from sending SCSI commands to the PowerVault 220S/221S systems during the firmware update. After the update is performed, these services are restored to their original status before running the package. * When both cluster nodes are in active mode, the PowerVault 220S/221S firmware download is not supported and may cause unknown effects. The PowerVault 220S/221S firmware update should be run only from the active node of an Active/Passive cluster. * The remote access controller firmware update uses FTP protocol to perform the update commands. If a firewall is installed in the system, it may cause the firmware update to fail. * If you have a PowerEdge server with 4GB of system memory installed and attempt to update the BIOS, the system might hang on the BIOS post screen[mlb]. The system must be manually rebooted. Note that the BIOS will not be upgraded. To perform the BIOS update, use the diskette flash method or temporarily remove or add some memory. * Dell Update Packages for BMC, BP, and ESM are not compatible with the OpenIPMI driver or the Intel IMB driver. If the OpenIPMI driver or Linux Intel IMB driver is loaded on your system, unload the driver before executing the Dell Update Package. ###################################################################### Information in this document is subject to change without notice. (C) 2005 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: "Dell," "Dell OpenManage," "PowerVault," and "PowerEdge" are trademarks of Dell Inc.; "Red Hat" is a registered trademark of Red Hat, Inc; "Intel" is a registered trademark of Intel Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. August 2005