<!--          RIBCL Sample Script for Integrated Lights-Out          -->
<!--   Copyright (c) 2003 Hewlett-Packard Development Company, L.P.  -->

<!-- Description:  This is a sample XML script to update the         -->
<!--               firmware of the Integrated Lights-Out (iLO)       -->
<!--               management processor.                             -->

<!-- NOTE:  You will need to replace the USER_LOGIN and PASSWORD     -->
<!--        values with values that are appropriate for your         -->
<!--        environment and you will need to change the value of the -->
<!--        IMAGE_LOCATION to point to the new binary firmware image -->
<!--        you wish to use for the firmware update.                 -->

<!--        The Unit ID light flashes when the server is engaged in  -->
<!--        an activity that can not or should not be interrupted    -->
<!--        (such as updating iLO firmware or an active Remote       -->
<!--        Console session).  The Unit ID light should flash while  -->
<!--        this script is updating the iLO firmware.                -->
<!--        The iLO will automatically reset itself to have the new  -->
<!--        firmware take effect at the end of the firmware flash.   -->

<!--        Use CPQLOCFG.EXE ver 2.10 or greater with this script    -->
<!--        This script was written for iLO firmware ver 1.10 or     -->
<!--        higher.                                                  -->
<!--        See the iLO User Guide for more information on scripting -->
<!--        and the syntax of the RIBCL XML.                         -->

<RIBCL VERSION="2.0">
  <LOGIN USER_LOGIN="adminname" PASSWORD="password">
    <RIB_INFO MODE="write">
      <UPDATE_RIB_FIRMWARE IMAGE_LOCATION="C:\ILO110.bin"/>
    </RIB_INFO>
  </LOGIN>
</RIBCL>
