<!--          RIBCL Sample Script for Integrated Lights-Out          -->
<!--   Copyright (c) 2003 Hewlett-Packard Development Company, L.P.  -->

<!-- Description:  This is a sample XML script to toggle the UID     -->
<!--               on the host server in which the iLO is executing. -->

<!-- NOTE:  You will need to replace the USER_LOGIN and PASSWORD     -->
<!--        values with values that are appropriate for your         -->
<!--        environment.                                             -->

<!--        The Unit ID light will be flashing if the server is      -->
<!--        engaged in an activity that can not or should not be     -->
<!--        interrupted (such as updating iLO firmware or an active  -->
<!--        Remote Console session).  This script will not change    -->
<!--        the status of a flashing Unit ID light until the activity-->
<!--        causing the flashing status is completed.                -->

<!--        Use CPQLOCFG.EXE ver 2.10 or greater with this script    -->
<!--        This script was written for iLO firmware ver 1.10 or     -->
<!--        higher.                                                  -->
<!--        See the iLO User Guide for more information on scripting -->
<!--        and the syntax of the RIBCL XML.                         -->

<RIBCL VERSION="2.0">
  <LOGIN USER_LOGIN="adminname" PASSWORD="password">
  <SERVER_INFO MODE="write">
    <!-- Modify the UID attribute to toggle UID on the host server -->
    <!-- UID="No"   (Turns host server UID off) -->
    <!-- UID="Yes"  (Turns host server UID on) -->
    <UID_CONTROL UID="Yes"/>
  </SERVER_INFO>
  </LOGIN>
</RIBCL>
