<!--          RIBCL Sample Script for Integrated Lights-Out          -->
<!--   Copyright (c) 2003 Hewlett-Packard Development Company, L.P.  -->

<!-- Description:  This is a sample XML script to power cycle (off   -->
<!--               and then back on) the host server in which the    -->
<!--               Integrated Lights-Out (iLO) management processor  -->
<!--               is executing.                                     -->

<!-- NOTE:  You will need to replace the USER_LOGIN and PASSWORD     -->
<!--        values with values that are appropriate for your         -->
<!--        environment.                                             -->

<!--        This script will NOT attempt to gracefully shutdown the  -->
<!--        host operating system before it powers off the server.   -->

<!--        If graceful shutdown is needed (if your OS supports it), -->
<!--        then use the Set_Host_Power_Off.xml script to attempt a  -->
<!--        graceful shutdown of the OS (if your OS supports it)     -->
<!--        before powering off the server and then use the          -->
<!--        Set_Host_Power_On.xml script to turn the server back on. -->

<!--        Use CPQLOCFG.EXE ver 2.10 or greater with this script    -->
<!--        This script was written for iLO firmware ver 1.10 or     -->
<!--        higher.                                                  -->
<!--        See the iLO User Guide for more information on scripting -->
<!--        and the syntax of the RIBCL XML.                         -->

<RIBCL VERSION="2.0">
  <LOGIN USER_LOGIN="adminname" PASSWORD="password">
  <SERVER_INFO MODE="write">
    <RESET_SERVER/>
  </SERVER_INFO>
  </LOGIN>
</RIBCL>
