<!--          RIBCL Sample Script for Integrated Lights-Out          -->
<!--   Copyright (c) 2003 Hewlett-Packard Development Company, L.P.  -->

<!-- Description:  This is a sample XML script to configure the      -->
<!--               Global Settings for an Integrated Lights-Out (iLO)-->

<!-- NOTE:  You will need to replace the USER_LOGIN and PASSWORD     -->
<!--        and other values inside the quotation marks with values  -->
<!--        that are appropriate for your environment.               -->
<!--        marks with values that are appropriate for your          -->
<!--        environment.                                             -->

<!--        Double check your values before executing this script.   -->
<!--        Incorrect or mismatched port settings may cause you      -->
<!--        to lose the ability to connect to your iLO device.       -->

<!--        The iLO management processor (not the server) will reset --> 
<!--        automatically to make changes to port settings effective -->

<!--        Setting the ILO_FUNCT_ENABLED to No will disable the     -->
<!--        management functions of iLO.  If disabled, you must use  -->
<!--        the iLO Security Override Switch on your server's system -->
<!--        board and the iLO ROM-Based Setup Utility (F8) to        -->
<!--        re-enable iLO.                                           -->

<!--        Use CPQLOCFG.EXE ver 2.10 or greater with this script    -->
<!--        This script was written for iLO firmware ver 1.50 or     -->
<!--        higher.                                                  -->
<!--        See the iLO User Guide for more information on scripting -->
<!--        and the syntax of the RIBCL XML.                         -->

<RIBCL VERSION="2.0">
  <LOGIN USER_LOGIN="adminname" PASSWORD="password">
  <RIB_INFO MODE="write">
    <MOD_GLOBAL_SETTINGS>
      <SESSION_TIMEOUT value="60"/>
      <ILO_FUNCT_ENABLED value="Yes"/>
      <F8_PROMPT_ENABLED value="Yes"/>
      <REMOTE_CONSOLE_ENCRYPTION value="Yes"/>
      <HTTP_PORT value="80"/>
      <HTTPS_PORT value="443"/>
      <VIRTUAL_MEDIA_PORT value="17988"/>
      <REMOTE_CONSOLE_PORT value="23"/>
      <MIN_PASSWORD value="8"/>
      <!-- New features in iLO ver 1.50 and later -->
      <PASSTHROUGH_CONFIG value="1"/>
      <F8_LOGIN_REQUIRED value="No"/>
      <REMOTE_CONSOLE_PORT_STATUS value="2"/>
      <TERMINAL_SERVICES_PORT value="3389"/>
      <REMOTE_KEYBOARD_MODEL value="US"/>
    </MOD_GLOBAL_SETTINGS>
  </RIB_INFO>
  </LOGIN>
</RIBCL>
