<!--          RIBCL Sample Script for Integrated Lights-Out          -->
<!--   Copyright (c) 2003 Hewlett-Packard Development Company, L.P.  -->

<!-- Description:  This is a sample XML script to configure the      -->
<!--               front iLO Diagnostic Port settings for a          -->
<!--               BL p-Class server blade                           -->

<!-- NOTE:  You will need to replace the USER_LOGIN and PASSWORD     -->
<!--        and other values inside the quotation marks with values  -->
<!--        that are appropriate for your environment.               -->

<!--        Double check your values before executing this script.   -->
<!--        Incorrect or mismatched network settings may cause you   -->
<!--        to lose the ability to connect to your iLO device.       -->            

<!--        Use CPQLOCFG.EXE ver 2.10 or greater with this script    -->
<!--        This script was written for iLO firmware ver 1.10 or     -->
<!--        higher.                                                  -->
<!--        See the iLO User Guide for more information on scripting -->
<!--        and the syntax of the RIBCL XML.                         -->

<RIBCL VERSION="2.0">
  <LOGIN USER_LOGIN="adminname" PASSWORD="password">
  <RACK_INFO MODE="write">
    <MOD_DIAGPORT_SETTINGS>
      <DP_SPEED_AUTOSELECT value="No"/>
      <DP_NIC_SPEED value="100"/>
      <DP_FULL_DUPLEX value="Yes"/>
      <DP_IP_ADDRESS value="192.168.142.56"/>
      <DP_SUBNET_MASK value="255.255.0.0"/>
    </MOD_DIAGPORT_SETTINGS>
  </RACK_INFO>
  </LOGIN>
</RIBCL>
