Home  Administration > Monitor Administration > SiteScope Data Collector Configuration > Managing SiteScope > SiteScope Preferences > SNMP Trap Preferences > SNMP Trap Profile Settings



SNMP Trap Profile Settings

The following describes the settings used for SNMP Trap Profiles.

Main Settings

You use the Main Settings section to enter information that defines the SNMP Trap Profile. Complete the Main Settings section for the SNMP Trap Profile as described below.

Name

Enter a text description for this SNMP Trap Profile definition. This name will be used to identify this SNMP Trap Profile definition in the product display.

Send to Host

Enter the host name of the machine to which this trap should be sent. For example, snmp.thiscompany.com. This machine must be running an SNMP console.

SNMP Community

Enter the SNMP community name used for this trap - usually this is "public".

SNMP Trap ID

The type of trap to send. There are several predefined ID types for common conditions. You use the Generic SNMP Trap ID drop-down menu to select a generic SNMP type. To use an enterprise specific SNMP ID type, select the "Other" option in the Generic SNMP Trap ID drop-down menu and then enter the number of the specific trap type in the Enterprise-Specific SNMP Trap ID field.

SNMP Trap Version

Select the SNMP protocol version number to use. SNMP v1 and v2c are currently supported.

SNMP Object ID

Indicate the SNMP object that is sending the trap. For example .1.3.6.1.2.1.1 is the "system" object from MIB-II (RFC 1213).

Advanced Settings

You use the Advanced Settings section to customize the SNMP Trap Profile. Complete the entries as needed and click the Add or OK button to save the settings.

Description

Enter an optional description text to further describe this SNMP Trap Profile. For example, you may enter some text describing the purpose or conditions relating to the use of this SNMP Trap Profile.




Copyright 2006 Mercury Interactive Corporation