Administration > Monitor Administration > SiteScope Data Collector Configuration > Managing SiteScope > SiteScope Preferences > Pager Preferences > Pager Recipient Profile Settings
Pager Recipient Profile Settings
The following describes the settings used for Pager Recipient Profiles.
Main Settings
You use the Main Settings section to enter information that defines the Pager Recipient Profile. Complete the Main Settings section for the Pager Recipient Profile as described below.
Name
Enter a text description for this Pager Recipient Profile definition. This name will be used to identify this Pager Recipient Profile definition in the product display.
Pager Connection Options
As with the default pager settings, there are four methods for sending a message to your paging service. Select the pager connection option you want SiteScope to use to send pages. Click the radio button to the left of the connection method you need to use and fill in the associated fields as indicated.
Modem-to-Modem Connection (Preferred)
Click the radio button to the left of this option if you have an alphanumeric pager and use an alphanumeric paging service. In the Modem Number text box, type the phone number to use for sending alphanumeric pages to the paging service modem.
In the PIN number text box, type the last seven digits of the PIN number for your alphanumeric pager.
Dial and Enter Message
Click the radio button to the left of this option if you dial a direct phone number to send a page. In the Phone number text box, enter the phone number exactly as you would dial it from your telephone, including other numbers you might need such as a number to get an outside line. Use commas to separate the portions of the phone number. Be sure to include any extra digits needed to get an outside line from your location.
Dial, Enter Command, and Enter Message
Click the radio button to the left of this option if you have a direct number, but need to enter a command before sending a page. Also, choose this option if your paging company uses a single phone number for all pagers and requests a PIN number before sending a page. In the Phone number text box, type the phone number exactly as you would dial it from your telephone, including other numbers you might need such as a number to get an outside line. Use commas to separate the portions of the phone number. Be sure to include any extra digits needed to get an outside line from your location.
In the Send page command text box, type the page command exactly as you would dial it from your touch tone telephone.
Custom Modem Connection
Click the radio button to the left of this option if your paging company does not use any of the previous connection option choices. In the Modem command text box, type the entire modem command including the phone number to dial, any additional digits, and $message. SiteScope replaces $message with the message you specified for each alert. Use commas to separate the portions of the phone number, command strings, and alert message strings.
Note: For SiteScope running on UNIX, enter the device path for your modem in the Modem Path box. To see a list of devices using Solaris, use the ls /dev/term/* command.
Disabled
Click this button to stop pages from being sent to this pager. You use this option to temporarily disable a particular pager without editing every alert that contains this persons pager. For example, when Joe goes on vacation you will want to disable his pager setting. Of course, you will also want to make sure that there is another pager specified for each alert that Joe is selected on so that someone will receive a page if there is a problem.
Advanced Settings
You use the Advanced Settings section to customize the Pager Recipient Profile. Complete the entries as needed and click the Add or OK button to save the settings.
Description
Enter an optional description text to further describe this Pager Recipient Profile. For example, you may enter some text describing the purpose or conditions relating to the use of this Pager Recipient Profile.
Schedule
You use this option to specify when these pager settings should be enabled. By default, they are enabled every day of the week. You may select a more restricted schedule from the names schedules in the drop-down menu.
Category Settings
The Category settings are used to filter items in the Monitor Administration views. For details, see Working with Categories in Working with Monitor Administration.
| Copyright 2006 Mercury Interactive Corporation |