#!/bin/sh #!/bin/shell-v1%-######################################################### # # install_native.sh # #-%emc-cr-shell%-############################################################ #-%emc-cr-shell-v1%-######################################################### # # Copyright (c) 2008, EMC Corporation. All rights reserved. # # # This software is furnished under a license and may be used and copied # only in accordance with the terms of such license and with the # inclusion of the above copyright notice. This software or any other # copies thereof may not be provided or otherwise made available to any # other person. No title to and ownership of the software is hereby # transferred. # # The information in this software is subject to change without notice # and should not be construed as a commitment by EMC Corporation. # # EMC Corporation assumes no responsibility for the use or reliability # of this software. # # EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE # SUITABILITY OF THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING # BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. # EMC CORPORATION SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY # LICENSEE AS A RESULT OF USING, MODIFYING OR DISTRIBUTING THIS # SOFTWARE OR ITS DERIVATIVES. # ############################################################################# ############################################################################## # Functions #----------------------------------------------------------------------------- backup_file() { FILE_ORIG=$1 FILE_BACK=$2 if [ -f $FILE_ORIG ] ; then cp ${FILE_ORIG} ${FILE_BACK} else echo "File ${FILE_ORIG} does not exist" fi } #------------------------------------------------------------------------------ clean_rmfile() { RM_FILENAME=$1 if [ -f $RM_FILENAME ] ; then rm ${RM_FILENAME} fi } #------------------------------------------------------------------------------ logrot() { BASEFILE=$1 maxNum=5 # max kept archive files iterNum=$maxNum # start iterator value nextNum=0 # next value; just initialize # check size of log if [ -f $BASEFILE ] ; then BASESIZE=`du -sk ${BASEFILE} | awk '{print $1}'` #echo File size is currently at $BASESIZE if [ $BASESIZE -lt 1 ]; then return fi fi while [ $iterNum -ne 0 ] do nextNum=`expr $iterNum + 1` if [ -f "${BASEFILE}.${maxNum}" ] && [ "$iterNum" -eq "$maxNum" ] ; then #echo "Removing last archived ${BASEFILE}" rm -f "${BASEFILE}.${maxNum}" fi if [ -f "${BASEFILE}.$iterNum" ]; then #echo "Incrementing to ${BASEFILE}.${nextNum}" mv "${BASEFILE}.$iterNum" "${BASEFILE}.$nextNum" fi iterNum=`expr $iterNum - 1` done #-- update the first if [ -f ${BASEFILE} ] ; then mv $BASEFILE ${BASEFILE}.1 fi } #------------------------------------------------------------------------------ stop_all_subagents() { TOOLS_PATH=$1 STOPALL_MAXLOOP=4 STOPALL_SLEEP=30 subrtn=`ps -ef | grep $TOOLS_PATH | grep -v grep | grep -v $0 2> /dev/null` if [ -n "$subrtn" ] ; then echo "EMC ControlCenter Sub Agents stopping ..." ps -ef | grep $TOOLS_PATH | grep -v grep | grep -v $0 | awk '{print $2}' | xargs kill continue_loop=1 loop_count=1; while [ "$continue_loop" = 1 ] do sleep $STOPALL_SLEEP subrtn=`ps -ef | grep $TOOLS_PATH | grep -vc grep 2> /dev/null` if [ "$subrtn" -gt 0 ] ; then echo " Agents still running ..." ps -ef | grep $TOOLS_PATH | grep -v grep | awk '{printf("\t%s\n",$8)}' else continue_loop=0 fi loop_count=`expr $loop_count + 1` if [ "$loop_count" -gt $STOPALL_MAXLOOP ] ; then continue_loop=0; fi done subrtn=`ps -ef | grep $TOOLS_PATH | grep -v grep 2> /dev/null` if [ -n "$subrtn" ] ; then echo "EMC ControlCenter Sub Agents did not all stop within given time." echo "Aborting." echo "EMC ControlCenter Sub Agents did not all stop within given time." >> $LOG_FILE exit 1 else echo "EMC ControlCenter Sub Agents stopped." fi else echo "EMC ControlCenter Sub Agents already stopped." fi } ############################################################################## echo " " echo " " echo " ########################################################## " echo " # # " echo " # EMC Control Center Tools Installation Script # " echo " # # " echo " ########################################################## " echo " " grep "Copyright" $0 | head -1 > /dev/null 2>&1 echo " " echo " The terms of your use of this software are governed by the " echo " applicable contract. " echo " " ANSWERS_FILE=/tmp/install.txt #--------------------------------------------------------------------------- # Parse Command Line Arguments # Arg 1 must be absolute path name of the CD/nfs mountpoint. #--------------------------------------------------------------------------- CD_ROOT=$1 usage_ok=0 this_script=`basename $0` if [ -n "$CD_ROOT" ] ; then # first, we need an argument if [ -d "$CD_ROOT" ] ; then # it must be a valid directory if [ -f "$CD_ROOT/$this_script" ] ; then # it must contain our script char1=`echo $CD_ROOT | cut -c1` if [ "$char1" = "/" ] ; then usage_ok=1 else echo "ERROR: \"${CD_ROOT}\" is not an absolute path name" fi else echo "ERROR: Cannot find file \"${this_script}\" in directory \"${CD_ROOT}\"." fi else echo "ERROR: \"${CD_ROOT}\" is not a valid directory." fi fi IS_SILENT=0 export IS_SILENT SILENT_OPTIONS="" if [ "-s" = "$2" ] ; then # test for optional second argument, "-s" if [ -n "$3" ] ; then # test for silent install file argument if [ -f "$3" ] ; then # test for existence of silent install file SILENT_INSTALL_FILE=$3 echo "Silent Install File = $SILENT_INSTALL_FILE" echo "" # Set agent default to no ECC_HOST_AGENT="" ECC_ORACLE_AGENT="" ECC_CMA_AGENT="" ECC_SYM_AGENT="" ECC_SDM_AGENT="" # Source-in silent install file and set all "ECC_" variables . $SILENT_INSTALL_FILE SILENT_OPTIONS="-s $SILENT_INSTALL_FILE" IS_SILENT=1 else usage_ok=0 echo "ERROR: Silent install file does not exist." fi else usage_ok=0 echo "ERROR: Silent install file not specified." fi fi if [ $usage_ok -ne 1 ] ; then echo "" echo "usage: $this_script [-s ]" echo "" echo " must be the absolute path of the media's mount point." echo "" echo " [-s ] : must specify" echo " absolute path to silent install file." echo "" exit 255 fi #------------------------------------------------------------------------- # On Linux, because it's BSD, echo "blah blah blah: \c" won't work # We need to set up the echo cmd for user input. #------------------------------------------------------------------------- if [ "`echo -n`" = "-n" ]; then C='\c' N= else C= N='-n' fi #--------------------------------------------------------------------------- # Global Variables #--------------------------------------------------------------------------- OS_TYPE=`/usr/bin/uname 2> /dev/null` OS_MAJOR=`/usr/bin/uname -v 2> /dev/null` OS_MINOR=`/usr/bin/uname -r 2> /dev/null` #--------------------------------------------------------------------------- # On Linux, /usr/bin/uname may not be there #--------------------------------------------------------------------------- if [ "$OS_TYPE" = "" ]; then OS_TYPE=`/bin/uname`; fi #--------------------------------------------------------------------------- #--------------------------------------------------------------------------- # Quick check for OS that's not supported. #--------------------------------------------------------------------------- OS_SUPPORTED=0 MA_PACKAGE="" HOST_PACKAGE="" ORACLE_PACKAGE="" CMA_PACKAGE="" SYM_PACKAGE="" SDM_PACKAGE="" OraAgent="false" CmaAgent="false" HostAgent="false" SymAgent="false" SdmAgent="false" if [ "$OS_TYPE" = "SunOS" ] ; then OS_SUPPORTED=1 NATIVE_DIR="SunOS" MA_PACKAGE="ECCMAGT" HOST_PACKAGE="ECCHAGT" ORACLE_PACKAGE="ECCOAGT" CMA_PACKAGE="ECCCAGT" SYM_PACKAGE="ECCSAGT" SDM_PACKAGE="ECCDAGT" HostAgent="true" CmaAgent="true" OraAgent="true" SymAgent="true" SdmAgent="true" ORACLE_DIR="EGO" HOST_DIR="MSR" CMA_DIR="EGZ" SYM_DIR="EGS" SDM_DIR="EGF" fi if [ "$OS_TYPE" = "HP-UX" ] ; then OS_SUPPORTED=1 NATIVE_DIR="HP-UX" MA_PACKAGE="ECCMAGT" HOST_PACKAGE="ECCHAGT" ORACLE_PACKAGE="ECCOAGT" SYM_PACKAGE="ECCSAGT" SDM_PACKAGE="ECCDAGT" OraAgent="true" HostAgent="true" SymAgent="true" SdmAgent="true" ORACLE_DIR="EGO" HOST_DIR="MHR" SYM_DIR="EGS" SDM_DIR="EGF" fi if [ "$OS_TYPE" = "Linux" ] ; then OS_SUPPORTED=1 NATIVE_DIR="Linux" MA_PACKAGE="magent.rpm" HOST_PACKAGE="hagent.rpm" HostAgent="true" HOST_DIR="MLR" fi if [ "$OS_TYPE" = "AIX" ] ; then OS_SUPPORTED=1 NATIVE_DIR="AIX" MA_PACKAGE="ECCAGENTS.bff" HOST_PACKAGE="ECCAGENTS.bff" ORACLE_PACKAGE="ECCAGENTS.bff" SYM_PACKAGE="ECCAGENTS.bff" SDM_PACKAGE="ECCAGENTS.bff" HostAgent="true" OraAgent="true" SymAgent="true" SdmAgent="true" HOST_DIR="MAR" ORACLE_DIR="EGO" SYM_DIR="EGS" SDM_DIR="EGF" fi if [ $OS_SUPPORTED -ne 1 ] ; then echo "" echo "ERROR: OS $OS_TYPE $OS_MAJOR $OS_MINOR is not supported." echo "" exit 1 fi #--------------------------------------------------------------------------- # Safety check - avoid overwrite of existing MA! # Check for upgrade #--------------------------------------------------------------------------- IS_UPGRADE=0 IS_MAINT=0 ECCRC=/var/emc/.eccrc if [ -f $ECCRC ] ; then if [ $IS_SILENT -eq 1 ] ; then echo "Setup detected a previously installed Master Agent. A silent install file was also detected. If an upgrade, setup will use the Server Host from the silent file. Otherwise, setup will continue with the information from the previously installed Master Agent." echo "" fi . $ECCRC ECC_PATH=$tools_path LOG_FILE=$ECC_PATH/install_native.log echo "" echo "Log File is located at $LOG_FILE" echo "" logrot $LOG_FILE clean_rmfile $LOG_FILE if [ -d $ECC_PATH/exec/MGA610 ] ; then echo "A 6.1 Master Agent is already installed" echo "Install mode is Maintenance." >> $LOG_FILE echo "" IS_MAINT=1 else if [ -d $ECC_PATH/exec/MGA600 ] ; then echo "A 6.0 Master Agent was found. Setting upgrade mode." echo "Install mode is Upgrade." >> $LOG_FILE echo "" IS_UPGRADE=1 else if [ -d $ECC_PATH/exec/MGA520 ] ; then echo "A 5.2 Master Agent was found. Setting upgrade mode." echo "Install mode is Upgrade." >> $LOG_FILE echo "" IS_UPGRADE=1 else echo "An unsupported version of Master Agent was found. Please uninstall from $ECC_PATH to continue." echo "ERROR: An unsupported version of Master Agent was found. Please uninstall from $ECC_PATH to continue." >> $LOG_FILE exit 1 fi fi fi fi if [ $IS_SILENT -eq 1 ] ; then if [ $IS_UPGRADE -eq 0 ] && [ $IS_MAINT -eq 0 ] ; then # Ensure that all required values have been set if [ -n "$ECC_PATH" ] && [ -n "$ECC_SERVER_HOST" ] && [ -n "$ECC_SERVER_HOSTIP" ] && [ -n "$ECC_SERVER_PORT" ] && [ -n "$ECC_SECURE_PORT" ] &&[ -n "$ECC_MASTER_PORT" ] && [ -n "$ECC_MASTER_STARTUP" ] ; then echo "Silent Install Parameters:" echo "ECC_PATH = $ECC_PATH" echo "ECC_SERVER_HOSTIP = $ECC_SERVER_HOSTIP" echo "ECC_SERVER_HOST = $ECC_SERVER_HOST" echo "ECC_SERVER_PORT = $ECC_SERVER_PORT" echo "ECC_SECURE_PORT = $ECC_SECURE_PORT" echo "ECC_MASTER_PORT = $ECC_MASTER_PORT" echo "ECC_MASTER_STARTUP = $ECC_MASTER_STARTUP" if [ "$ECC_HOST_AGENT" != "" ] ; then echo "ECC_HOST_AGENT = $ECC_HOST_AGENT" fi if [ "$ECC_ORACLE_AGENT" != "" ] ; then echo "ECC_ORACLE_AGENT = $ECC_ORACLE_AGENT" fi if [ "$ECC_CMA_AGENT" != "" ] ; then echo "ECC_CMA_AGENT = $ECC_CMA_AGENT" fi if [ "$ECC_SYM_AGENT" != "" ] ; then echo "ECC_SYM_AGENT = $ECC_SYM_AGENT" fi if [ "$ECC_SDM_AGENT" != "" ] ; then echo "ECC_SDM_AGENT = $ECC_SDM_AGENT" fi echo "" else echo "" echo "ERROR: Required install values are missing from the silent install file." echo " The file should contain values similar to the example below:" echo " ECC_PATH=/usr/ecc" echo " ECC_SERVER_HOSTIP=123.456.789.10" echo " ECC_SERVER_HOST=foo" echo " ECC_SERVER_PORT=5799" echo " ECC_SECURE_PORT=10799" echo " ECC_MASTER_PORT=5798" echo " ECC_MASTER_STARTUP=Y" echo " [Optional Agents]" echo " ECC_HOST_AGENT=Y" echo " ECC_ORACLE_AGENT=Y" echo " ECC_CMA_AGENT=Y" echo " ECC_SYM_AGENT=Y" echo " ECC_SDM_AGENT=Y" echo "" exit 1 fi fi if [ $IS_UPGRADE -eq 1 ] ; then if [ -n "$ECC_SERVER_HOST" ] && [ -n "$ECC_SERVER_HOSTIP" ] ; then echo "Silent Install Parameters:" echo "ECC_SERVER_HOSTIP = $ECC_SERVER_HOSTIP" echo "ECC_SERVER_HOST = $ECC_SERVER_HOST" if [ "$ECC_HOST_AGENT" != "" ] ; then echo "ECC_HOST_AGENT = $ECC_HOST_AGENT" fi if [ "$ECC_ORACLE_AGENT" != "" ] ; then echo "ECC_ORACLE_AGENT = $ECC_ORACLE_AGENT" fi if [ "$ECC_CMA_AGENT" != "" ] ; then echo "ECC_CMA_AGENT = $ECC_CMA_AGENT" fi if [ "$ECC_SYM_AGENT" != "" ] ; then echo "ECC_SYM_AGENT = $ECC_SYM_AGENT" fi if [ "$ECC_SDM_AGENT" != "" ] ; then echo "ECC_SDM_AGENT = $ECC_SDM_AGENT" fi echo "" else echo "ERROR: The silent file is only used during upgrade to change the Server Host or add additional agents. The required install values are missing from the silent install file." echo "" echo " The file should contain values similar to the example below:" echo " ECC_SERVER_HOSTIP=123.456.789.10" echo " ECC_SERVER_HOST=foo" echo " [Optional Agents]" echo " ECC_HOST_AGENT=Y" echo " ECC_ORACLE_AGENT=Y" echo " ECC_CMA_AGENT=Y" echo " ECC_SYM_AGENT=Y" echo " ECC_SDM_AGENT=Y" echo "" exit 1 fi fi fi #Check to make sure all packages are present. Uses relative DIR. if [ ! -f $CD_ROOT/$NATIVE_DIR/$MA_PACKAGE ] ; then echo "The Master Agent package ($MA_PACKAGE) does not exist in $CD_ROOT/$NATIVE_DIR." exit 1 else if [ "$HOST_PACKAGE" != "" ] ; then if [ ! -f $CD_ROOT/$NATIVE_DIR/$HOST_PACKAGE ] ; then echo "The Host Agent package ($HOST_PACKAGE) does not exist in $CD_ROOT/$NATIVE_DIR. All agent packages must exist in the same directory." exit 1 fi fi if [ "$ORACLE_PACKAGE" != "" ] ; then if [ ! -f $CD_ROOT/$NATIVE_DIR/$ORACLE_PACKAGE ] ; then echo "The Oracle Agent package ($ORACLE_PACKAGE) does not exist in $CD_ROOT/$NATIVE_DIR. All agent packages must exist in the same directory." exit 1 fi fi if [ "$CMA_PACKAGE" != "" ] ; then if [ ! -f $CD_ROOT/$NATIVE_DIR/$CMA_PACKAGE ] ; then echo "The Common Mapping Agent package ($CMA_PACKAGE) does not exist in $CD_ROOT/$NATIVE_DIR. All agent packages must exist in the same directory." exit 1 fi fi if [ "$SYM_PACKAGE" != "" ] ; then if [ ! -f $CD_ROOT/$NATIVE_DIR/$SYM_PACKAGE ] ; then echo "The Symmetrix Agent package ($SYM_PACKAGE) does not exist in $CD_ROOT/$NATIVE_DIR. All agent packages must exist in the same directory." exit 1 fi fi if [ "$SDM_PACKAGE" != "" ] ; then if [ ! -f $CD_ROOT/$NATIVE_DIR/$SDM_PACKAGE ] ; then echo "The Symmetrix SDM Agent package ($SDM_PACKAGE) does not exist in $CD_ROOT/$NATIVE_DIR. All agent packages must exist in the same directory." exit 1 fi fi fi #--------------------------------------------------------------------------- # Ask for Target Installation Root #--------------------------------------------------------------------------- if [ $IS_SILENT -eq 0 ] && [ $IS_UPGRADE -eq 0 ] && [ $IS_MAINT -eq 0 ]; then ECC_PATH=/usr/ecc if [ "$OS_TYPE" = "AIX" ] ; then echo "AIX native installation does not support custom install locations." echo "Agents will be installed to ${ECC_PATH}" else echo $N "Please enter ECC root directory[${ECC_PATH}]: $C" read temp if [ "${temp}" != "" ] then temp1=`echo ${temp} | awk '{print $1}' ` ECC_PATH=${temp1} fi fi fi #-- AIX only allowed to be installed in default location for native installs if [ "$OS_TYPE" = "AIX" ] && [ "${ECC_PATH}" != "/usr/ecc" ]; then echo "ERROR: Native installs on AIX does not support custom install locations." echo " Only /usr/ecc is allowed on AIX." echo "Exiting ..." echo "ERROR: Native installs on AIX does not support custom install locations." >> $LOG_FILE exit 1 fi # Create ECC_HOME directory in case it doesn't exist if [ $IS_UPGRADE -eq 0 ] && [ $IS_MAINT -eq 0 ] ; then if [ ! -d $ECC_PATH ] ; then mkdir -p $ECC_PATH fi LOG_FILE=$ECC_PATH/install_native.log echo "" echo "Log File is located at $LOG_FILE" echo "" echo "Install mode is Install." >> $LOG_FILE fi ## set env variable for Japanese inhibition for UNIX master agent install #setenv LC_ALL C #------------------------------------------------------------------------------ # For some reason, HPUX 11.23 IA64 does not run properly without this line. # This is most notable when doing a Native install which requires more # arguments to be passed in. #------------------------------------------------------------------------------ echo " " #------------------------------------------------------------------------------ MGAVER="MGA610" os_name=`uname -s` min_port=0 max_port=65536 VAR_EMC_DIR="/var/emc" VAR_EMC_FILE="/var/emc/.eccrc" if [ $IS_SILENT = 1 ] ; then # IS_SILENT and all vars prefixed with "ECC_" are set in "install_setup.sh" SERVER_HOST=$ECC_SERVER_HOSTIP SERVER_COMPONENT=$ECC_SERVER_HOST SERVER_PORT=$ECC_SERVER_PORT SECURE_PORT=$ECC_SECURE_PORT MASTER_PORT=$ECC_MASTER_PORT ADDMA2RC=$ECC_MASTER_STARTUP else if [ $IS_UPGRADE -eq 0 ] && [ $IS_MAINT -eq 0 ] ; then ############################################################################ # #Ask all questions up-front in a loop. Prompt user for confirmation # Make sure the appearance is the same between Unix and Windows. # Reset the default after each prompted entry (so that it remembers them on # the next iteration) ############################################################################ Q_SERVER_HOST_OR_IP="ECC Server's Hostname or IP address" Q_SERVER_HOST_ONLY="ECC Server's Hostname" Q_SERVER_PORT="ECC Server's Port" Q_SECURE_PORT="ECC Secure Server Port" Q_MASTER_PORT="Master Agent's Listening Port" V_SERVER_HOST="ECC Server Host Name " V_SERVER_PORT="ECC Server Port " V_SECURE_PORT="ECC Secure Server Port " V_MASTER_PORT="Master Agent's Listening Port " D_SERVER_HOST="" D_SERVER_PORT=5799 D_SECURE_PORT=10799 D_MASTER_PORT=5798 stay_in_loop=1 while [ $stay_in_loop = 1 ] do echo "" echo "" #========================================================================= # Ask For Server Address (IP or hostname) #========================================================================= question="$Q_SERVER_HOST_OR_IP" default=$D_SERVER_HOST answer="" while [ "$answer" = "" ] do echo $N " ${question} [${default}]: $C" read answer if [ "$answer" = "" ] ; then answer="$default" fi done SERVER_HOST=$answer SERVER_COMPONENT=$answer D_SERVER_HOST=$answer #========================================================================= # If it's an IP, prompt for host name (so we can generate component name) # It's an IP if it's got 3 dots, 4 fields that are only digits #========================================================================= nfields=`echo $SERVER_HOST | awk -F. '{print NF}'` nothing=`echo $SERVER_HOST | tr -d '.' | tr -d '[0-9]'` if [ "$nothing" = "" ] && [ $nfields = 4 ] ; then question="$Q_SERVER_HOST_ONLY" default="" answer="" while [ "$answer" = "" ] do echo $N " ${question} [${default}]: $C" read answer if [ "$answer" = "" ] ; then answer="$default" fi done SERVER_COMPONENT=$answer fi #=========================================================================== # If it's an IPV6, prompt for host name (so we can generate component name) # It's an IPV6 if it's got 7 ":", 8 fields that are hex values # User must enter full address, no short cuts for groups of zeros etc. #========================================================================== nfields=`echo $SERVER_HOST | awk -F: '{print NF}'` nothing=`echo $SERVER_HOST | tr -d ':' | tr -d '[0-9]' | tr -d '[a-f]' | tr -d '[A-F]'` if [ "$nothing" = "" ] && [ $nfields = 8 ] ; then question="$Q_SERVER_HOST_ONLY" default="" answer="" while [ "$answer" = "" ] do echo $N " ${question} [${default}]: $C" read answer if [ "$answer" = "" ] ; then answer="$default" fi done SERVER_COMPONENT=$answer fi #========================================================================= # Ask For Server Port Number #========================================================================= question="$Q_SERVER_PORT" default=$D_SERVER_PORT answer="" while [ "$answer" = "" ] do echo $N " ${question} [${default}]: $C" read answer if [ "$answer" = "" ] ; then answer=$default fi filter=`echo $answer | tr -d '[0-9]'` if [ "$filter" != "" ] ; then answer=0 fi if [ $answer -le $min_port ] || [ $answer -ge $max_port ] ; then echo "Please enter a number between $min_port and $max_port." answer="" fi done SERVER_PORT=$answer D_SERVER_PORT=$answer #========================================================================== # Ask For Secure Server Port Number #========================================================================== question="$Q_SECURE_PORT" default=$D_SECURE_PORT answer="" while [ "$answer" = "" ] do echo $N " ${question} [${default}]: $C" read answer if [ "$answer" = "" ] ; then answer="$default" fi filter=`echo $answer | tr -d '[0-9]'` if [ "$filter" != "" ] ; then answer=0 fi if [ "$answer" -le "$min_port" ] || [ "$answer" -ge "$max_port" ] ; then echo "Please enter a number between $min_port and $max_port." answer="" fi done SECURE_PORT=$answer D_SECURE_PORT=$answer #========================================================================= # Ask For Master Port Number #========================================================================= question="$Q_MASTER_PORT" default=$D_MASTER_PORT answer="" while [ "$answer" = "" ] do echo $N " ${question}: [${default}] $C" read answer if [ "$answer" = "" ] ; then answer="$default" fi filter=`echo $answer | tr -d '[0-9]'` if [ "$filter" != "" ] ; then answer=0 fi if [ $answer -le $min_port ] || [ $answer -ge $max_port ] ; then echo "Please enter a number between $min_port and $max_port." answer="" fi done MASTER_PORT=$answer D_MASTER_PORT=$answer #========================================================================= # End of questions. Prompt user if all inputs are acceptable #========================================================================= echo "" echo "" echo "" echo "###################################################################" echo "# Input Verification" echo "###################################################################" echo "" echo $N "$V_SERVER_HOST $SERVER_HOST" if [ "$SERVER_HOST" = "$SERVER_COMPONENT" ] ; then echo "" else echo " (${SERVER_COMPONENT})" fi echo "$V_SERVER_PORT $SERVER_PORT" echo "$V_SECURE_PORT $SECURE_PORT" echo "$V_MASTER_PORT $MASTER_PORT" echo "" answer="" while [ "$answer" = "" ] do echo $N "Are all inputs above acceptable [Y|N|Q]: $C" read answer case "${answer}" in y) stay_in_loop=0 ;; Y) stay_in_loop=0 ;; n) stay_in_loop=1 ;; N) stay_in_loop=1 ;; q) echo "" echo "Installation aborted" echo "" echo "Installation aborted by user" >> $LOG_FILE exit 1 ;; Q) echo "" echo "Installation aborted" echo "" echo "Installation aborted by user" >> $LOG_FILE exit 1 ;; x) echo "" echo "Installation aborted" echo "" echo "Installation aborted by user" >> $LOG_FILE exit 1 ;; X) echo "" echo "Installation aborted" echo "" echo "Installation aborted by user" >> $LOG_FILE exit 1 ;; *) answer="" ;; esac done # end # end of the big input loop! done fi # end of Install Questions fi # end of IS_SILENT ############################################################################### # Add Master Agent to /etc/rc.d files (or equivalent) # Since AIX's implementation of rc.d entries does not behave as defined by # its man-page, we are currently not supporting this feature for AIX ############################################################################### if [ $IS_UPGRADE -eq 0 ] && [ $IS_MAINT -eq 0 ] ; then STARTUP="" if [ $OS_TYPE = "AIX" ] ; then STARTUP="NO" fi echo "" while [ "$STARTUP" = "" ] do if [ $IS_SILENT = 0 ] ; then echo $N "Do you want EMC ControlCenter MasterAgent to start on reboot [Y|N]: $C" read ADDMA2RC fi case "${ADDMA2RC}" in y) STARTUP="YES" ;; Y) STARTUP="YES" ;; n) STARTUP="NO" ;; N) STARTUP="NO" ;; *) if [ $IS_SILENT = 0 ] ; then STARTUP="" else STARTUP="NO" fi ;; esac echo "STARTUP = $STARTUP" >> $LOG_FILE done fi #Ask for additional agents #Host Agent INSTALLHOST="NO" if [ $HostAgent = "true" ] ; then INSTALLHOST="" if [ $IS_UPGRADE -eq 1 ] ; then if [ -f $ECC_PATH/exec/$HOST_DIR"600"/$HOST_DIR".ini" ] || [ -f $ECC_PATH/exec/$HOST_DIR"520"/$HOST_DIR".ini" ] ; then INSTALLHOST="YES" fi fi if [ $IS_MAINT -eq 1 ] ; then if [ -f $ECC_PATH/exec/$HOST_DIR"610"/$HOST_DIR".ini" ] ; then INSTALLHOST="YES" fi fi fi echo "" while [ "$INSTALLHOST" = "" ] do if [ $IS_SILENT = 0 ] ; then echo $N "Do you want to install EMC ControlCenter Host Agent [Y|N]: $C" read ECC_HOST_AGENT fi case "${ECC_HOST_AGENT}" in y) INSTALLHOST="YES" ;; Y) INSTALLHOST="YES" ;; n) INSTALLHOST="NO" ;; N) INSTALLHOST="NO" ;; *) if [ $IS_SILENT = 0 ] ; then INSTALLHOST="" else INSTALLHOST="NO" fi ;; esac echo "INSTALLHOST = $INSTALLHOST" >> $LOG_FILE done #Oracle Agent INSTALLORACLE="NO" if [ $OraAgent = "true" ] ; then INSTALLORACLE="" if [ $IS_UPGRADE -eq 1 ] ; then if [ -f $ECC_PATH/exec/$ORACLE_DIR"600"/$ORACLE_DIR".ini" ] || [ -f $ECC_PATH/exec/$ORACLE_DIR"520"/$ORACLE_DIR".ini" ] ; then INSTALLORACLE="YES" fi fi if [ $IS_MAINT -eq 1 ] ; then if [ -f $ECC_PATH/exec/$ORACLE_DIR"610"/$ORACLE_DIR".ini" ] ; then INSTALLORACLE="YES" fi fi fi echo "" while [ "$INSTALLORACLE" = "" ] do if [ $IS_SILENT = 0 ] ; then echo $N "Do you want to install EMC ControlCenter Oracle Agent [Y|N]: $C" read ECC_ORACLE_AGENT fi case "${ECC_ORACLE_AGENT}" in y) INSTALLORACLE="YES" ;; Y) INSTALLORACLE="YES" ;; n) INSTALLORACLE="NO" ;; N) INSTALLORACLE="NO" ;; *) if [ $IS_SILENT = 0 ] ; then INSTALLORACLE="" else INSTALLORACLE="NO" fi ;; esac echo "INSTALLORACLE = $INSTALLORACLE" >> $LOG_FILE done #Common Mapping Agent INSTALLCMA="NO" if [ $CmaAgent = "true" ] ; then INSTALLCMA="" if [ $IS_UPGRADE -eq 1 ] ; then if [ -f $ECC_PATH/exec/$CMA_DIR"600"/$CMA_DIR".ini" ] || [ -f $ECC_PATH/exec/$CMA_DIR"520"/$CMA_DIR".ini" ] ; then INSTALLCMA="YES" fi fi if [ $IS_MAINT -eq 1 ] ; then if [ -f $ECC_PATH/exec/$CMA_DIR"610"/$CMA_DIR".ini" ] ; then INSTALLCMA="YES" fi fi fi echo "" while [ "$INSTALLCMA" = "" ] do if [ $IS_SILENT = 0 ] ; then echo $N "Do you want to install EMC ControlCenter Common Mapping Agent [Y|N]: $C" read ECC_CMA_AGENT fi case "${ECC_CMA_AGENT}" in y) INSTALLCMA="YES" ;; Y) INSTALLCMA="YES" ;; n) INSTALLCMA="NO" ;; N) INSTALLCMA="NO" ;; *) if [ $IS_SILENT = 0 ] ; then INSTALLCMA="" else INSTALLCMA="NO" fi ;; esac echo "INSTALLCMA = $INSTALLCMA" >> $LOG_FILE done #Symmetrix Agent INSTALLSYM="NO" if [ $SymAgent = "true" ] ; then INSTALLSYM="" if [ $IS_UPGRADE -eq 1 ] ; then if [ -f $ECC_PATH/exec/$SYM_DIR"600"/$SYM_DIR".ini" ] || [ -f $ECC_PATH/exec/$SYM_DIR"520"/$SYM_DIR".ini" ] ; then INSTALLSYM="YES" fi fi if [ $IS_MAINT -eq 1 ] ; then if [ -f $ECC_PATH/exec/$SYM_DIR"610"/$SYM_DIR".ini" ] ; then INSTALLSYM="YES" fi fi fi echo "" while [ "$INSTALLSYM" = "" ] do if [ $IS_SILENT = 0 ] ; then echo $N "Do you want to install EMC ControlCenter Symmetrix Agent [Y|N]: $C" read ECC_SYM_AGENT fi case "${ECC_SYM_AGENT}" in y) INSTALLSYM="YES" ;; Y) INSTALLSYM="YES" ;; n) INSTALLSYM="NO" ;; N) INSTALLSYM="NO" ;; *) if [ $IS_SILENT = 0 ] ; then INSTALLSYM="" else INSTALLSYM="NO" fi ;; esac echo "INSTALLSYM = $INSTALLSYM" >> $LOG_FILE done #SDM Agent INSTALLSDM="NO" if [ $SdmAgent = "true" ] ; then INSTALLSDM="" if [ $IS_UPGRADE -eq 1 ] ; then if [ -f $ECC_PATH/exec/$SDM_DIR"600"/$SDM_DIR".ini" ] || [ -f $ECC_PATH/exec/$SDM_DIR"520"/$SDM_DIR".ini" ] ; then INSTALLSDM="YES" fi fi if [ $IS_MAINT -eq 1 ] ; then if [ -f $ECC_PATH/exec/$SDM_DIR"610"/$SDM_DIR".ini" ] ; then INSTALLSDM="YES" fi fi fi echo "" while [ "$INSTALLSDM" = "" ] do if [ $IS_SILENT = 0 ] ; then echo $N "Do you want to install EMC ControlCenter Symmetrix SDM Agent [Y|N]: $C" read ECC_SDM_AGENT fi case "${ECC_SDM_AGENT}" in y) INSTALLSDM="YES" ;; Y) INSTALLSDM="YES" ;; n) INSTALLSDM="NO" ;; N) INSTALLSDM="NO" ;; *) if [ $IS_SILENT = 0 ] ; then INSTALLSDM="" else INSTALLSDM="NO" fi ;; esac echo "INSTALLSDM = $INSTALLSDM" >> $LOG_FILE done #////////////////////////////////////////////////////////////////////////////// #--------------------------------------------------------------------------- # Check for disk space # Variable Name Convention: kb__a # is the product that needs the space # is the spot where the space is needed #--------------------------------------------------------------------------- kb_logs=25600 # 25 megabytes kb_percent=10 # 10% padding case "${OS_TYPE}" in SunOS) kb_host=`expr 50000 + $kb_logs` kb_mstr=`expr 48175 + $kb_logs` kb_cmap=`expr 5000 + $kb_logs` kb_orac=`expr 108000 + $kb_logs` kb_sym=`expr 13000 + $kb_logs` kb_sdm=`expr 5000 + $kb_logs` ;; HP-UX) kb_host=`expr 50000 + $kb_logs` kb_mstr=`expr 42993 + $kb_logs` kb_cmap=0 kb_orac=`expr 112000 + $kb_logs` kb_sym=`expr 22000 + $kb_logs` kb_sdm=`expr 9000 + $kb_logs` ;; AIX) kb_host=`expr 50000 + $kb_logs` kb_mstr=`expr 61219 + $kb_logs` kb_cmap=0 kb_orac=`expr 110000 + $kb_logs` kb_sym=`expr 20000 + $kb_logs` kb_sdm=`expr 9000 + $kb_logs` ;; Linux) kb_host=`expr 50000 + $kb_logs` kb_mstr=`expr 51732 + $kb_logs` kb_cmap=0 kb_orac=0 kb_sym=0 kb_sdm=0 ;; esac # How much space is needed in each mountpoint? MIN_KB_NA=$kb_mstr if [ "$INSTALLHOST" = "YES" ] ; then MIN_KB_NA=`expr $MIN_KB_NA + $kb_host` fi if [ "$INSTALLORACLE" = "YES" ] ; then MIN_KB_NA=`expr $MIN_KB_NA + $kb_orac` fi if [ "$INSTALLCMA" = "YES" ] ; then MIN_KB_NA=`expr $MIN_KB_NA + $kb_cmap` fi if [ "$INSTALLSYM" = "YES" ] ; then MIN_KB_NA=`expr $MIN_KB_NA + $kb_sym` fi if [ "$INSTALLSDM" = "YES" ] ; then MIN_KB_NA=`expr $MIN_KB_NA + $kb_sdm` fi PAD_KB_NA=`expr $MIN_KB_NA / $kb_percent` MIN_KB_NA=`expr $MIN_KB_NA + $PAD_KB_NA` # Check both dirs (potentially same mount point) for space case "${OS_TYPE}" in SunOS) SPACEKB=`df -k $ECC_PATH | awk '{print $4}' | tail -1` MNTPT=`df -k $ECC_PATH | awk '{print $6}' | tail -1` echo $SPACEKB | grep '%' > /dev/null 2>&1 if [ $? -eq 0 ] ; then # df -k must have line-wrapped! SPACEKB=`df -k $ECC_PATH | awk '{print $3}' | tail -1` MNTPT=`df -k $ECC_PATH | awk '{print $5}' | tail -1` fi ;; HP-UX) SPACEKB=`bdf $ECC_PATH | awk '{print $4}' | tail -1` MNTPT=`bdf $ECC_PATH | awk '{print $6}' | tail -1` echo $SPACEKB | grep '%' > /dev/null 2>&1 if [ $? -eq 0 ] ; then # bdf must have line-wrapped! SPACEKB=`bdf $ECC_PATH | awk '{print $3}' | tail -1` MNTPT=`bdf $ECC_PATH | awk '{print $5}' | tail -1` fi ;; AIX) # Note, AIX's implementation of "df" never line-wraps SPACEKB=`df -k $ECC_PATH | awk '{print $3}' | tail -1` MNTPT=`df -k $ECC_PATH | awk '{print $7}' | tail -1` ;; Linux) SPACEKB=`df -k $ECC_PATH | awk '{print $4}' | tail -1` MNTPT=`df -k $ECC_PATH | awk '{print $6}' | tail -1` echo $SPACEKB | grep '%' > /dev/null 2>&1 if [ $? -eq 0 ] ; then # df -k must have line-wrapped! SPACEKB=`df -k $ECC_PATH | awk '{print $3}' | tail -1` MNTPT=`df -k $ECC_PATH | awk '{print $5}' | tail -1` fi ;; esac MA_MNTPT=$MNTPT MA_SPACE=$SPACEKB #////////////////////////////////////////////////////////////////////////////// if [ $IS_UPGRADE -eq 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "" echo "NativeAgent Target FileSystem ..... $MA_MNTPT" echo " Disk Space Detected ............. $MA_SPACE kb" echo " Disk Space Required (minimum) ... $MIN_KB_NA kb" if [ $MIN_KB_NA -gt $MA_SPACE ] ; then echo "ERROR: There is insufficent disk space to install selected agents" echo " under $MA_MNTPT" echo "Exiting ..." echo "ERROR: There is insufficent disk space to install agents under $MA_MNTPT" >> $LOG_FILE exit 1 fi if [ ! -d /tmp ] ; then mkdir /tmp fi fi if [ $IS_UPGRADE -eq 0 ] && [ $IS_MAINT -eq 0 ] ; then #Store variables in install.txt file echo "ECC_SERVER_HOST=$SERVER_COMPONENT" > $ANSWERS_FILE echo "ECC_SERVER_HOSTIP=$SERVER_HOST" >> $ANSWERS_FILE echo "ECC_SERVER_PORT=$SERVER_PORT" >> $ANSWERS_FILE echo "ECC_SECURE_SERVER_PORT=$SECURE_PORT" >> $ANSWERS_FILE echo "ECC_MASTER_PORT=$MASTER_PORT" >> $ANSWERS_FILE echo "ECC_PATH=$ECC_PATH" >> $ANSWERS_FILE echo "ECC_MASTER_STARTUP=$STARTUP" >> $ANSWERS_FILE echo "ECC PATH = $ECC_PATH" >> $LOG_FILE echo "ECC SERVER HOST = $SERVER_COMPONENT" >> $LOG_FILE echo "ECC SERVER HOSTIP = $SERVER_HOST" >> $LOG_FILE echo "ECC SERVER PORT = $SERVER_PORT" >> $LOG_FILE echo "ECC SECURE SERVER PORT = $SECURE_PORT" >> $LOG_FILE echo "ECC MASTER PORT = $MASTER_PORT" >> $LOG_FILE fi if [ $IS_UPGRADE -eq 1 ] && [ $IS_SILENT -eq 1 ] ; then echo "ECC_SERVER_HOST=$SERVER_COMPONENT" > $ANSWERS_FILE echo "ECC_SERVER_HOSTIP=$SERVER_HOST" >> $ANSWERS_FILE echo "Upgrading with a silent file. New Server Host will be $SERVER_HOST" >> $LOG_FILE echo "ECC SERVER HOST = $SERVER_COMPONENT" >> $LOG_FILE echo "ECC SERVER HOSTIP = $SERVER_HOST" >> $LOG_FILE fi # Set installation/upgrade text for logs if [ $IS_UPGRADE -eq 0 ] ; then INSTALLLOGMODE="Installation" INSTALLPKGLOGMODE="Installing" else INSTALLLOGMODE="Upgrade" INSTALLPKGLOGMODE="Upgrading" fi #LINUX if [ $OS_TYPE = "Linux" ] ; then RETV=0 echo "$INSTALLPKGLOGMODE Master Agent..." echo "$INSTALLPKGLOGMODE $MA_PACKAGE..." >> $LOG_FILE rpm -Uvh $CD_ROOT/$NATIVE_DIR/$MA_PACKAGE --prefix=$ECC_PATH >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE of Master Agent failed." echo "$INSTALLLOGMODE of Master Agent failed." >> $LOG_FILE echo "Please refer to $LOG_FILE" exit 1 fi if [ $INSTALLHOST = "YES" ] ; then echo "$INSTALLPKGLOGMODE Host Agent..." echo "$INSTALLPKGLOGMODE $HOST_PACKAGE..." >> $LOG_FILE rpm -Uvh $CD_ROOT/$NATIVE_DIR/$HOST_PACKAGE --prefix=$ECC_PATH >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE of Host Agent failed." echo "$INSTALLLOGMODE of Host Agent failed." >> $LOG_FILE fi fi if [ -f /etc/init.d/eccmad ] ; then if [ -f /etc/redhat-release ] ; then initdir="/etc/rc.d/init.d" rcsdir="/etc/rc.d/rc3.d" else initdir="/etc/init.d" rcsdir="/etc/init.d/rc3.d" fi if [ ! -f $rcsdir/S99eccmad ] ; then echo "Setting up startup scripts." echo "Setting up startup scripts." >> $LOG_FILE ln -s $initdir/eccmad $rcsdir/S99eccmad ln -s $initdir/eccmad $rcsdir/K00eccmad fi fi echo "$INSTALLLOGMODE is complete." echo "$INSTALLLOGMODE is complete." >> $LOG_FILE fi #HP-UX if [ $OS_TYPE = "HP-UX" ] ; then RETV=0 echo "$INSTALLPKGLOGMODE Master Agent..." echo "$INSTALLPKGLOGMODE $MA_PACKAGE..." >> $LOG_FILE swinstall -s $CD_ROOT/$NATIVE_DIR/$MA_PACKAGE ECC_MAGENT,l=$ECC_PATH >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE of Master Agent failed." echo "$INSTALLLOGMODE of Master Agent failed." >> $LOG_FILE echo "Please refer to $LOG_FILE" exit 1 fi if [ $INSTALLHOST = "YES" ] ; then echo "$INSTALLPKGLOGMODE Host Agent..." echo "$INSTALLPKGLOGMODE $HOST_PACKAGE..." >> $LOG_FILE swinstall -s $CD_ROOT/$NATIVE_DIR/$HOST_PACKAGE ECC_HAGENT,l=$ECC_PATH >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE of Host Agent failed." echo "$INSTALLLOGMODE of Host Agent failed." >> $LOG_FILE fi fi if [ $INSTALLORACLE = "YES" ] ; then echo "$INSTALLPKGLOGMODE Oracle Agent..." echo "$INSTALLPKGLOGMODE $ORACLE_PACKAGE..." >> $LOG_FILE swinstall -s $CD_ROOT/$NATIVE_DIR/$ORACLE_PACKAGE ECC_OAGENT,l=$ECC_PATH >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE of Oracle Agent failed." echo "$INSTALLLOGMODE of Oracle Agent failed." >> $LOG_FILE fi fi if [ $INSTALLSYM = "YES" ] ; then echo "$INSTALLPKGLOGMODE Symmetrix Agent..." echo "$INSTALLPKGLOGMODE $SYM_PACKAGE..." >> $LOG_FILE swinstall -s $CD_ROOT/$NATIVE_DIR/$SYM_PACKAGE ECC_SAGENT,l=$ECC_PATH >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE of Symmetrix Agent failed." echo "$INSTALLLOGMODE of Symmetrix Agent failed." >> $LOG_FILE fi fi if [ $INSTALLSDM = "YES" ] ; then echo "$INSTALLPKGLOGMODE Symmetrix SDM Agent..." echo "$INSTALLPKGLOGMODE $SDM_PACKAGE..." >> $LOG_FILE swinstall -s $CD_ROOT/$NATIVE_DIR/$SDM_PACKAGE ECC_DAGENT,l=$ECC_PATH >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE of Symmetrix SDM Agent failed." echo "$INSTALLLOGMODE of Symmetrix SDM Agent failed." >> $LOG_FILE fi fi echo "$INSTALLLOGMODE is complete." echo "$INSTALLLOGMODE is complete." >> $LOG_FILE fi #//////////////////////////////////////////////////////////////////////////////////////// #AIX if [ $OS_TYPE = "AIX" ] ; then RETV=0 clean_rmfile /tmp/installnima.log clean_rmfile /tmp/installnihost.log clean_rmfile /tmp/installniora.log clean_rmfile /tmp/installnisym.log clean_rmfile /tmp/installnisdm.log if [ $IS_UPGRADE -eq 1 ] || [ $IS_MAINT -eq 1 ] ; then stop_all_subagents $ECC_PATH fi # if [ $IS_MAINT -eq 0 ] ; then if [ $IS_UPGRADE -eq 0 ] ; then echo "$INSTALLPKGLOGMODE Master Agent..." #echo "Installing $MA_PACKAGE..." >> $LOG_FILE installp -a -X -q -e /tmp/installnima.log -d $CD_ROOT/$NATIVE_DIR/$MA_PACKAGE ECCAGENTS.MASTER >> $LOG_FILE 2>&1 RETV=$? else if [ $IS_UPGRADE -eq 1 ] ; then echo "$INSTALLPKGLOGMODE Master Agent..." #echo "Upgrading $MA_PACKAGE..." installp -a -X -q -e /tmp/installnima.log -d $CD_ROOT/$NATIVE_DIR/$MA_PACKAGE ECCAGENTS.MASTER >> $LOG_FILE 2>&1 RETV=$? fi fi if [ $RETV -ne 0 ] ; then echo "$INSTALLLOGMODE for Master Agent failed." echo "$INSTALLLOGMODE for Master Agent failed." >> $LOG_FILE exit 1 fi # fi #-------------------------------------------------------------------------------------- if [ $INSTALLHOST = "YES" ] ; then echo "$INSTALLPKGLOGMODE Host Agent..." #echo "Installing $HOST_PACKAGE..." >> $LOG_FILE installp -a -X -q -e /tmp/installnihost.log -d $CD_ROOT/$NATIVE_DIR/$HOST_PACKAGE ECCAGENTS.HOST >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] ; then echo "$INSTALLLOGMODE for Host Agent failed." echo "$INSTALLLOGMODE for Host Agent failed." >> $LOG_FILE fi fi #-------------------------------------------------------------------------------------- if [ $INSTALLORACLE = "YES" ] ; then echo "$INSTALLPKGLOGMODE Oracle Agent..." #echo "Installing $ORACLE_PACKAGE..." >> $LOG_FILE installp -a -X -q -e /tmp/installniora.log -d $CD_ROOT/$NATIVE_DIR/$ORACLE_PACKAGE ECCAGENTS.ORACLE >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] ; then echo "$INSTALLLOGMODE for Oracle Agent failed." echo "$INSTALLLOGMODE for Oracle Agent failed." >> $LOG_FILE fi fi #-------------------------------------------------------------------------------------- if [ $INSTALLSYM = "YES" ] ; then echo "$INSTALLPKGLOGMODE Symmetrix Agent..." #echo "Installing $SYM_PACKAGE..." >> $LOG_FILE installp -a -X -q -e /tmp/installnisym.log -d $CD_ROOT/$NATIVE_DIR/$SYM_PACKAGE ECCAGENTS.SYMMETRIX >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] ; then echo "$INSTALLLOGMODE for Symmetrix Agent failed." echo "$INSTALLLOGMODE for Symmetrix Agent failed." >> $LOG_FILE fi fi #-------------------------------------------------------------------------------------- if [ $INSTALLSDM = "YES" ] ; then echo "$INSTALLPKGLOGMODE Symmetrix SDM Agent..." #echo "Installing $SDM_PACKAGE..." >> $LOG_FILE installp -a -X -q -e /tmp/installnisdm.log -d $CD_ROOT/$NATIVE_DIR/$SDM_PACKAGE ECCAGENTS.SDM >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] ; then echo "$INSTALLLOGMODE for Symmetrix SDM Agent failed." echo "$INSTALLLOGMODE for Symmetrix SDM Agent failed." >> $LOG_FILE fi fi #-------------------------------------------------------------------------------------- echo "$INSTALLLOGMODE is complete." echo "$INSTALLLOGMODE is complete." >> $LOG_FILE fi #//////////////////////////////////////////////////////////////////////////////////////// #SunOS if [ $OS_TYPE = "SunOS" ] ; then RETV=0 if [ $IS_UPGRADE -eq 1 ] || [ $IS_MAINT -eq 1 ] ; then stop_all_subagents $ECC_PATH fi # Create admin file for SunOS silent install and uninstall. echo "Creating admin file..." echo "Creating admin file..." >> $LOG_FILE sunosAdminfile="/tmp/sunosAdminfile" cat /var/sadm/install/admin/default | sed -e 's/ask/nocheck/' >> $sunosAdminfile mv $sunosAdminfile $sunosAdminfile".bak" sed -e "s/unique/overwrite/g" $sunosAdminfile".bak" > $sunosAdminfile mv $sunosAdminfile $sunosAdminfile".bak" sed -e "s%default%$ECC_PATH%g" $sunosAdminfile".bak" > $sunosAdminfile installOptions="-n -a $sunosAdminfile" echo "$INSTALLPKGLOGMODE Master Agent..." echo "$INSTALLPKGLOGMODE $MA_PACKAGE..." >> $LOG_FILE pkgadd -d $NATIVE_DIR/$MA_PACKAGE $installOptions all >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE of Master Agent failed." echo "$INSTALLLOGMODE of Master Agent failed." >> $LOG_FILE echo "Please refer to $LOG_FILE" exit 1 fi if [ $INSTALLHOST = "YES" ] ; then echo "$INSTALLPKGLOGMODE Host Agent..." echo "$INSTALLPKGLOGMODE $HOST_PACKAGE..." >> $LOG_FILE pkgadd -d $NATIVE_DIR/$HOST_PACKAGE $installOptions all >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE for Host Agent failed." echo "$INSTALLLOGMODE for Host Agent failed." >> $LOG_FILE fi fi if [ $INSTALLORACLE = "YES" ] ; then echo "$INSTALLPKGLOGMODE Oracle Agent..." echo "$INSTALLPKGLOGMODE $ORACLE_PACKAGE..." >> $LOG_FILE pkgadd -d $NATIVE_DIR/$ORACLE_PACKAGE $installOptions all >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE for Oracle Agent failed." echo "$INSTALLLOGMODE for Oracle Agent failed." >> $LOG_FILE fi fi if [ $INSTALLCMA = "YES" ] ; then echo "$INSTALLPKGLOGMODE Common Mapping Agent..." echo "$INSTALLPKGLOGMODE $CMA_PACKAGE..." >> $LOG_FILE pkgadd -d $NATIVE_DIR/$CMA_PACKAGE $installOptions all >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE for Common Mapping Agent failed." echo "$INSTALLLOGMODE for Common Mapping Agent failed." >> $LOG_FILE fi fi if [ $INSTALLSYM = "YES" ] ; then echo "$INSTALLPKGLOGMODE Symmetrix Agent..." echo "$INSTALLPKGLOGMODE $SYM_PACKAGE..." >> $LOG_FILE pkgadd -d $NATIVE_DIR/$SYM_PACKAGE $installOptions all >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE for Symmetrix Agent failed." echo "$INSTALLLOGMODE for Symmetrix Agent failed." >> $LOG_FILE fi fi if [ $INSTALLSDM = "YES" ] ; then echo "$INSTALLPKGLOGMODE Symmetrix SDM Agent..." echo "$INSTALLPKGLOGMODE $SDM_PACKAGE..." >> $LOG_FILE pkgadd -d $NATIVE_DIR/$SDM_PACKAGE $installOptions all >> $LOG_FILE 2>&1 RETV=$? if [ $RETV -ne 0 ] && [ $IS_MAINT -eq 0 ] ; then echo "$INSTALLLOGMODE for Symmetrix SDM Agent failed." echo "$INSTALLLOGMODE for Symmetrix SDM Agent failed." >> $LOG_FILE fi fi if [ -f $sunosAdminfile ] ; then rm -f $sunosAdminfile 2>/dev/null fi echo "$INSTALLLOGMODE is complete." echo "$INSTALLLOGMODE is complete." >> $LOG_FILE fi if [ -f $ANSWERS_FILE ] ; then rm -f $ANSWERS_FILE 2>/dev/null fi echo "Please refer to $LOG_FILE for any issues with the $INSTALLLOGMODE."