####################################################################### Dell PowerVault MD3000 Firmware ####################################################################### ====================================================================== Contents ====================================================================== 1. Files included in this package 2. Fixes / Enhancements 3. Important Information 4. Firmware upgrade instructions 5. MD1000 Firmware upgrade instructions ====================================================================== 1. Files included in this package ====================================================================== Included in your firmware package are the following files: N133X-670890-701.dlp Single Port MS Cluster NVSRAM N133X-670890-001.dlp All other applications NVSRAM RC_06701760_133x.dlp RAID Controller Firmware MD1000_A04.bin MD1000 Firmware readme.txt Readme/upgrade instructions ====================================================================== 2. Fixes / Enhancements ====================================================================== - BBU Charge Timer Expiration fix. - support for windows 2008 Please refer to the Dell™ PowerVault™ MD3000 RAID Enclosure Hardware Owner's Manual for removal and installation instructions. ====================================================================== 3. Important Information ====================================================================== NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures being connected to the MD3000 are updated to the latest Dell PowerVault MD1000 EMM Firmware from support.dell.com. Dell PowerVault MD1000 EMM Firmware version A03 is the minimum required firmware level to support connection to the MD3000 array; attaching an MD1000 with unsupported firmware causes an uncertified condition to exist on the array. See the updated Hardware Owner's Manual on support.dell.com for more information. NOTICE: Ensure to check the MD3000 system support matrix on support.dell.com prior to connecting MD1000 enclosures to an MD3000 to ensure supported drives and firmware versions are used. ====================================================================== 4. Firmware upgrade instructions ====================================================================== NOTICE: You must stop I/O prior performing the following steps in a configuration with non redundant paths to the MD3000. You must either stop I/O or ensure your multipathing driver is installed properly prior to performing the following steps with redundant paths to the MD3000. If Upgrading for the first time to include SATA support, please follow the instructions described in the "Upgrading Storage Arrays to Support SATA Physical Disks" document on http://support.dell.com. 1. Launch Dell Modular Disk Storage Manager 2. Select your storage array from the drop down box in the upper left hand corner. 3. Click the Support tab 4. Click "Download Firmware" If upgrading both the RAID Controller firmware and the NVSRAM: 5. Click "Download RAID Controller Module Firmware" 6. Click "Select File". Choose the RAID Controller Firmware file from the directory that you extracted it to. Click OK. 7. Select "Transfer NVSRAM file with RAID controller module firmware". 8. Click "Select File". Choose the RAID controller module NVSRAM file from the directory that you extracted it in. Click OK. 9. Click "Transfer" to initiate the upgrade. If upgrading only the RAID Controller firmware: 5. Click "Download RAID Controller Module Firmware" 6. Click "Select File". Choose the RAID Controller Firmware file from the directory that you extracted it to. Click OK. 7. Click "Transfer" to initiate the upgrade. If upgrading only the NVSRAM: 5. Click "Download RAID Controller Module NVSRAM" 6. Click "Select File". Choose the RAID Controller NVSRAM file from the directory that you extracted it to. Click OK. 7. Click "Transfer" to initiate the upgrade. ====================================================================== 5. MD1000 Firmware upgrade instructions ====================================================================== Note: This interface is supported for Dell PowerVault MD1000 enclosures that have a minumum EMM Firmware version A03. Dell PowerVault MD1000 enclosures that connect to PERC 5 controllers may have a previous version and must be updated to a minimum version A03 prior to connecting the MD1000 enclosure to the MD3000. 1. Launch Dell Modular Disk Storage Manager 2. Select your storage array from the drop down box in the upper left hand corner. 3. Click the Support tab 4. Click "Download Firmware" 5. From the Download firmware display, click the Download Environmental (EMM) Card Firmware link. 6. Select where to download the EMM firmware by clicking an individual expansion enclosure to highlight it or by clicking the Select All checkbox to highlight all the expansion trays. 7. Click the Select File button to locate the directory in which the EMM firmware file to download resides. Select the file to download by double-clicking the file, and then click Start to start the download. ###################################################################### Information in this document is subject to change without notice. (c) 2005-2008 Dell Inc. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: "Dell," "Dell PowerVault," the DELL logo, "PowerEdge," and "PowerVault" are trademarks of Dell Inc.; "Microsoft," "Windows," "Windows NT," and "Windows 2000" are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than their own. July 24th 2008 Dell PowerVault MD3000 firmware, VERSION A04 README ********************************************************************** **********************************************************************