Broadcom NetXtreme Family of Adapters software 6.6a Release Notes 10/10/03 ================================================================= These notes provide release information for this release, and last minute corrections (if any) to the HTML user guide, which could be found in your product package and Dell website http://www.support.dell.com. Contents ======== - Viewing the user guide - Issue addressed in this release - Major changes in this release - Updating BACS on Windows 2000 and Windows Server 2003 - Updating BASP driver on Windows 2000 and Windows Server 2003 - Windows 2000: Windows friendly name - BASP: Avoiding fail-over issues - Dell Server support of Multi-Vendor Network Interface Card teaming - File and driver versions in this release Viewing the user guide ======================= Additional information can be found in the User's Guide. You can download it from Dell website http://www.support.dell.com Issue addressed in this release =============================== In a Microsoft Cluster environment, if Broadcom NICs are configured in a SLB team on each clustered server, during a cluster failover, the clients might not able to resolve the server MAC address to IP address properly, then the client cannot access to the network resource. You have to update the BASP intermediate driver and BACS in order to correct this issue. Major changes in this release ============================= The Broadcom NetXtreme Family of Adapters software 6.6a Release updates the following components of the 6.6 release: Product 6.6a Version 6.6 version. BASP Windows 2000 6.0.5* 6.0.1* BASP Windows Server 2003 6.0.5* 6.0.1* BACS 6.03.1 6.03 A silent teaming/VLAN configuration utility (BaspSCfg.exe) is released in this package, in the BASP_Unattend directory. The utility is a Win32 Console Mode executable that takes parameters as teaming configuration options to construct a team and no user interaction is required. Users can wrap the utility into their own configuration software to achieve their deployment purposes. Note: BASP (BROADCOM Advanced Server Program): BASP is for Microsoft Windows 2000, and Windows 2003 Server In this release. BASP is a intermediate driver, which is required for adapter teaming and VLAN. The team types supported by BASP are: Smart Load Balancing (SLB), Link Aggregation (802.3ad Dynamic), Generic Link Aggregation (Trunking). All team types provide failover Teaming. Failover Teaming provides redundant adapter operation in the event that a network connection fails. Broadcom Smart Load Balance (SLB) supports failover among BCM570x Adapters independent of transport protocols(TCP/ip, IPX, Netbeui). BACS (BROADCOM Advanced Control Suite): BACS is an integrated GUI application that allows you to view information of all NICs in the system, configure the load balance and failover team, view statistics per VLAN, and do Cable diagnostic. This application should be installed by running setup from the \MgmtApps\ folder. The BACS Systray is bundled in BACS for easy access to the control suite. This utility is installed when installing BACS. Updating BACS on Windows 2000 and Windows Server 2003 ===================================================== Following the instruction in your BACS.htm page of HTML manual to update BACS. The description is under subsection "Updating the Broadcom Advanced Control Suite" Note: BACS upgrade method described incorrectly in the bacs.htm page. It mentions you must choose the "Modify" button of the InstallShield Wizard to upgrade the BACS. The correct method is to choose "Repair/Upgrade" to upgrade BACS. Updating BASP on Windows 2000 and Windows Server 2003 ===================================================== Following the instruction in your BACS.htm page of HTML manual to update BASP(Broadcom Advanced Server Program). The description is under subsection "Updating the Broadcom Advanced Server Program" Note: To update the BASP, you must first uninstall the existing driver. Removing the existing BASP will uninstall your configured adapter team/VLAN. If you want to restore your team/VLAN later, consult your HTML manual and follow the instructions to save and restore your team/VLAN configuration before you removing the existing BASP. Windows 2000: Windows friendly name =================================== Due to a change in the Windows friendly name from "Broadcom Gigabit Ethernet Controller" to "Broadcom NetXtreme Gigabit Controller" additional steps will be required when upgrading versions of the driver prior to 1.30 in Windows 2000. Under My Computer -> Manage -> Device Manager -> Network Adapter Double click on the adapter you would like to upgrade. Select - Driver tab Select - Update Driver button The "Upgrade Device Driver Wizard" window should appear Click - Next Select - Search for a suitable driver for my device Click - Next Select - CD or Floppy depending on the media Select - Install one of the other drivers Click - Next The "Driver Files Found" window should appear Select - Broadcom NetXtreme Gigabit Controller Click - Next Click - Finish At this point the latest version of the driver will be installed. BASP: Avoiding fail-over issues =============================== To avoid fail-over issues when using BASP make sure that spanning tree is disabled on the switch that the network adapter is connected to. Dell Server support of Multi-Vendor Network Interface Card teaming ================================================================== Dell Server's Network Drivers support the use of an intermediate driver to provide advanced services such as Teaming and IEEE 802.1Q VLANS. Both Intel and Broadcom provide intermediate drivers specific to their network controllers and drivers, both vendor's intermediate driver allow for the inclusion of other brands of NICs in teaming configurations. Although both intermediate drivers can exist on a system at the same time, both should not be used at the same time. One intermediate driver should be utilized for all teams in a system. Using both intermediate drivers at the same time can produce unpredictable results, even if they are each used on different physical network controllers. Dell does not support the use of multiple intermediate network drivers at the same time in a system under any operating system. When teaming with either brand of intermediate driver, at least one network controller of the same brand of the intermediate driver must be used in that team, but a single card can not be used in more than one team at a time. Consult the documentation provided with the network driver software for specific details and an overview of provided Advanced Services. When using drivers from Broadcom Family of Adapter Driver version 6.6a for teaming, make sure to use drivers from Broadcom NetXtreme Gigabit Family Adapter Driver version 6.6a. Refer to "File and driver versions in this release" subsection for version information. File and driver versions in this release ========================================= Product 6.6a Version 6.6 version. Windows 2000 Driver 6.34.4* 6.34.4* Windows Server 2003 Driver 6.34.4* 6.34.4* DOS NDIS2 Driver 6.34 6.34 BASP Windows 2000 6.0.5* 6.0.1* BASP Windows Server 2003 6.0.5* 6.0.1* BACS 6.03.1 6.03 BMAPI 6.1.1 6.1.1 SNMP-BASP 1.0.7 1.0.7 CIM Provider 6.0.4 6.0.4 Note: An asterisk (*) following a version number represents a certified driver. This release contains the following software programs: BCM570x Miniport Driver for Microsoft Windows 2000 - b57w2k.sys This driver supports offloading with: - Onchip checksum IP, UDP, TCP - Jumbo frames - VLAN BCM570x Miniport Driver for Microsoft Windows Server 2003 - b57xp32.sys BCM570x DOS NDIS2 Driver - b57.dos BASP (BROADCOM Advanced Server Program): BASP is for Microsoft Windows 2000, and Windows 2003 Server In this release. BASP is a intermediate driver, which is required for adapter teaming and VLAN. The team types supported by BASP are: Smart Load Balancing (SLB), Link Aggregation (802.3ad Dynamic), Generic Link Aggregation (Trunking). All team types provide failover Teaming. Failover Teaming provides redundant adapter operation in the event that a network connection fails. Broadcom Smart Load Balance (SLB) supports failover among BCM570x Adapters independent of transport protocols(TCP/ip, IPX, Netbeui). BACS (BROADCOM Advanced Control Suite):This is an integrated GUI application that allows you to view information of all NICs in the system, configure the load balance and failover team, view statistics per VLAN, and do Cable diagnostic. This application should be installed by running setup from the \MgmtApps\ folder. The BACS Systray is bundled in BACS for easy access to the control suite. This utility is installed when installing BACS. BROADCOM Management Application Programming Interface (BMAPI) This DLL provides a common interface to BROADCOM Advanced Server Program, SNMP agents,DMI and Broadcom Advanced Server Control Suite. SNMP - Broadcom Advanced Server Program SNMP sub-agents - baspmgmnt.dll SNMP - Broadcom NetXtreme Gigabit Ethernet Controller SNMP sub-agents - bcmif.dll. CIM Provider - Broadcom CIM Providers for Windows 2000 - BCMGroup.dll Refer to the RELEASE.TXT file on the installation CD in the \MgmtApps\IA32\ReleaseNotes\cim for latest changes. Note: CIM - Failover events indication under Windows 2000 are supported within the intermediate drivers (baspw2k.dll). ===================================================================================================== * Third-party trademarks and copyrights are the property of their respective owners. Broadcom, Broadcom Advanced Server Program, Broadcom Advanced Server Control Suite, and Smart Load Balance are registered trademarks of Broadcom Corporation.