Broadcom Corporation 10/100/1000 NetXtreme Ethernet DOS/OS2 NDIS2 driver. CUSTOM KEYWORDS in driver in protocol.ini: BUSNUM DEVNUM FUNCNUM or PORTNUM The first two keywords are used concurrently and have been included for manufacturing purposes. Do not use them unless you are familiar with PCI device configuration. These two keywords are needed if multiple NetXtreme boards are on a system and (a) specific NetXtreme adapter/s need to be loaded in specific order. BUSNUM specifies the PCI bus number and DEVNUM specifies the device number given to the board when configured by the PCI BIOS. A PCI device scan utility is needed to find this info. The values are in decimal. Example of the use of these key words in the protocol.ini: [B57] DriverName = "B57$" BusNum = 3 DevNum = 14 PortNum = 2 To add more adapter(up to 4) repeat the below entry, where n can be from 1 to 3. [B57_n] DriverName = "B57$" BusNum = DevNum = Example of using addition entries to load more than one adapter in the protocol.ini: [B57] DriverName = "B57$" BusNum = 3 DevNum = 10 [B57_1] DriverName = "B57$" BusNum = 3 DevNum = 11 [B57_2] DriverName = "B57$" BusNum = 3 DevNum = 12 [B57_3] DriverName = "B57$" BusNum = 3 DevNum = 13