<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<HelpItems xmlns="http://msh" schema="maml">
<!-- Product Build Version: 15.00.0995.021 -->
<!-- Doc Build Version: 15.0.14209.2101 -->
<!-- Date/Time Created (UTC): 2014-07-29 16:51:05.435-->
0233fee8-f61b-4ccd-9793-ecf6743abc3e
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-ResubmitRequest</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-ResubmitRequest cmdlet to view requests to replay redundant copies of messages from Safety Net after a mailbox database recovery.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>ResubmitRequest</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-ResubmitRequest</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ResubmitRequestIdentityParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the resubmit request you want to view. Each resubmit request is identified by an incremented integer value.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ResubmitRequestIdentityParameter</command:parameterValue>
      <dev:type>
        <maml:name>ResubmitRequestIdentityParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns the details of all resubmit requests.</maml:para>
        <maml:para />
        <maml:para>Get-ResubmitRequest</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns details about the resubmit request with the identity 1.</maml:para>
        <maml:para />
        <maml:para>Get-ResubmitRequest 1</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/0233fee8-f61b-4ccd-9793-ecf6743abc3e(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>05615b24-f9c6-4e52-926b-6ecee810d115
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-DlpPolicyTemplate</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-DlpPolicyTemplate cmdlet to view existing data loss prevention (DLP) policy templates in your Exchange organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>DlpPolicyTemplate</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-DlpPolicyTemplate</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the DLP policy template you want to view. You can use any value that uniquely identifies the DLP policy template. For example, you can specify the name, GUID, or distinguished name (DN) of the DLP policy template.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DlpPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a summary list of all DLP policy templates.</maml:para>
        <maml:para />
        <maml:para>Get-DlpPolicyTemplate</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns detailed information about the DLP policy template named GLBA. The command is piped to the Format-List cmdlet to display the detailed configuration of the specified DLP policy template.</maml:para>
        <maml:para />
        <maml:para>Get-DlpPolicyTemplate GLBA | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para />
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/05615b24-f9c6-4e52-926b-6ecee810d115(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>0882bc55-0297-4d22-a141-1eb7187f5ea2
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-PolicyTipConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-PolicyTipConfig cmdlet to create custom Policy Tips in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>PolicyTipConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-PolicyTipConfig</maml:name>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Value</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the custom Policy Tip you want to modify. Valid input for this parameter is one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>&lt;Locale&gt;\&lt;Action&gt;: Locale is a supported locale code. For example, en for English or fr for French. For more information about supported locales, see Supported languages for system messages. Action is one of the following Policy Tip actions: NotifyOnly, RejectOverride or Reject.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Url</maml:para>
        </command:listItem></command:list>
        <maml:para>There can be only one custom Policy Tip with the value Url for the Name parameter. For the remaining Policy Tip actions, there can be only one custom Policy Tip for each combination of locale and action. For example, there can be only one custom Policy Tip with the Name value en\NotifyOnly, but you can create additional custom Policy Tips with the values de\NotifyOnly and fr\NotifyOnly for the Name parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Value</maml:name>
      <maml:description>
        <maml:para>The Value parameter specifies the text that's displayed by the Policy Tip. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a custom Policy Tip with the following settings:</maml:para>
        <maml:para />
        <maml:para>Locale: English</maml:para>
        <maml:para>Action: NotifyOnly</maml:para>
        <maml:para>Policy Tip text: "This message contains content that is restricted by Contoso company policy."</maml:para>
        <maml:para>New-PolicyTipConfig -Name en\NotifyOnly -Value "This message contains content that is restricted by Contoso company policy."</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the informational URL in Policy Tips to the value http://www.contoso.com/PolicyTipInformation.</maml:para>
        <maml:para />
        <maml:para>New-PolicyTipConfig Url -Value "http://www.contoso.com/PolicyTipInformation"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/0882bc55-0297-4d22-a141-1eb7187f5ea2(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>08834e46-f181-4d9d-95f4-0d5157e75f2a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-OutboundConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Remove-OutboundConnector cmdlet to delete an Outbound connector from your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>OutboundConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-OutboundConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OutboundConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the connector you want to remove.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OutboundConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OutboundConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example deletes the Outbound connector named Contoso Outbound Connector.</maml:para>
        <maml:para />
        <maml:para>Remove-OutboundConnector "Contoso Outbound Connector"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Outbound connectors send email messages to remote domains that require specific configuration options.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbound and Outbound connectors" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/08834e46-f181-4d9d-95f4-0d5157e75f2a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>0e3fcbd0-8f76-44e0-91ce-788a224e1e82
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-AgentLog</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-AgentLog cmdlet to parse log files that you specify as parameters and collect raw statistics from the filtering that anti-spam agents apply during a time period that you specify.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>AgentLog</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-AgentLog</maml:name>
      <command:parameter required="False">
        <maml:name>EndDate</maml:name>
        <command:parameterValue required="True">DateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Location</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>StartDate</maml:name>
        <command:parameterValue required="True">DateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportService</maml:name>
        <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndDate</maml:name>
      <maml:description>
        <maml:para>The EndDate parameter specifies the date and time that you want to stop collecting statistics. The default time is the current time. When you enter a specific date, use the short date format defined in the Regional Options settings configured on the local computer. For example, if your computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, for example, 10/05/2010. Or you can enter the date and time of day. If you enter a time of day and date, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00:00 PM".</maml:para>
      </maml:description>
      <command:parameterValue required="True">DateTime</command:parameterValue>
      <dev:type>
        <maml:name>DateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Location</maml:name>
      <maml:description>
        <maml:para>The Location parameter specifies the directory that contains the log files that you can use to build usage reports. The default path is %ExchangeInstallPath%TransportRoles\Logs\AgentLog. You must enclose the file path in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>StartDate</maml:name>
      <maml:description>
        <maml:para>The StartDate parameter specifies the date and time that the collection of statistics starts. The default time is the current time. When you enter a specific date, use the short date format defined in the Regional Options settings configured on the local computer. For example, if your computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, for example, 10/05/2010, or you can enter the date and time of day. If you enter a time of day and date, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00:00 PM".</maml:para>
      </maml:description>
      <command:parameterValue required="True">DateTime</command:parameterValue>
      <dev:type>
        <maml:name>DateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportService</maml:name>
      <maml:description>
        <maml:para>The TransportService parameter specifies the transport service that you want to view or modify. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Hub for the Transport service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxSubmission for the Mailbox Transport Submission service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxDelivery for the Mailbox Transport Delivery service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FrontEnd for the Front End Transport service on Client Access servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Edge on Edge Transport servers.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      <dev:type>
        <maml:name>Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a report that has statistics collected between 09:00 (9 A.M.), January 4, 2010 and 18:00 (6 P.M.), January 8, 2010 in the Front End Transport service on a Client Access server.</maml:para>
        <maml:para />
        <maml:para>Get-AgentLog -StartDate "01/04/2010 9:00:00 AM" -EndDate "01/08/2010 6:00:00 PM" -TransportService FrontEnd</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam features" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/0e3fcbd0-8f76-44e0-91ce-788a224e1e82(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>103ad92b-d56d-4568-9b30-35aea82cf0eb
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-PolicyTipConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-PolicyTipConfig cmdlet to view the data loss prevention (DLP) Policy Tips in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>PolicyTipConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-PolicyTipConfig</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">PolicyTipConfigIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-PolicyTipConfig</maml:name>
      <command:parameter required="False">
        <maml:name>Action</maml:name>
        <command:parameterValue required="True">NotifyOnly | RejectOverride | Reject | Url</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Locale</maml:name>
        <command:parameterValue required="True">CultureInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Original</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Action</maml:name>
      <maml:description>
        <maml:para>The Action parameter filters the Policy Tips by action. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>NotifyOnly</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RejectOverride</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Reject</maml:para>
        </command:listItem></command:list>
        <maml:para>You can't use the value Url with the Action parameter. Instead, use command: Get-PolicyTipConfig Url.</maml:para>
        <maml:para>You can't use the Action parameter with the Identity parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">NotifyOnly | RejectOverride | Reject | Url</command:parameterValue>
      <dev:type>
        <maml:name>NotifyOnly | RejectOverride | Reject | Url</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the custom Policy Tip you want to view. You can use any value that uniquely identifies the custom Policy Tip. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>&lt;Locale&gt;\&lt;Action&gt;: Locale is a supported locale code. For example, en for English or fr for French. For more information about supported locales, see Supported languages for system messages. Action is one of the following Policy Tip actions: NotifyOnly, RejectOverride or Reject.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The value Url</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem></command:list>
        <maml:para>You can't use the Identity parameter with the Action, Locale, or Original parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">PolicyTipConfigIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>PolicyTipConfigIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Locale</maml:name>
      <maml:description>
        <maml:para>The Locale parameter specifies a locale-specific version of the Policy Tip.</maml:para>
        <maml:para>Valid values for this parameter are supported locale codes. For example, en for English or fr for French. For more information about supported locales, see Supported languages for system messages.</maml:para>
        <maml:para>You can't use the Locale parameter with the Identity parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">CultureInfo</command:parameterValue>
      <dev:type>
        <maml:name>CultureInfo</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Original</maml:name>
      <maml:description>
        <maml:para>The Original switch includes built-in Policy Tips in the results. You don't specify a value with the Original switch. You can't use the Original switch with the Identity parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a summary list of the custom Policy Tips in all languages that have the action value NotifyOnly.</maml:para>
        <maml:para />
        <maml:para>Get-PolicyTipConfig -Action NotifyOnly</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a summary list of all built-in French Policy Tips.</maml:para>
        <maml:para />
        <maml:para>Get-PolicyTipConfig -Original -Locale fr</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns details about the custom English Policy Tip for the action value RejectOverride.</maml:para>
        <maml:para />
        <maml:para>Get-PolicyTipConfig en\RejectOverride | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/103ad92b-d56d-4568-9b30-35aea82cf0eb(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>12908079-b1ef-4a8b-82ba-fc92a342032e
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-FrontendTransportService</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-FrontEndTransportService cmdlet to view the transport configuration information for the Front End Transport service on Client Access servers.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>FrontendTransportService</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-FrontendTransportService</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">FrontendTransportServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server that you want to view.</maml:para>
      </maml:description>
      <command:parameterValue required="True">FrontendTransportServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>FrontendTransportServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays a list of all Client Access servers in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-FrontEndTransportService</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves the detailed configuration information for the Front End Transport service on the Client Access server named CAS01.</maml:para>
        <maml:para />
        <maml:para>Get-FrontEndTransportService CAS01 | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Front End Transport service runs on all Client Access servers and acts as a stateless proxy for all inbound and outbound external SMTP traffic for the Exchange organization. The Front End Transport service only communicates with the Transport service on a Mailbox server, and doesn't queue any messages locally.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Front End Transport service" entries in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/12908079-b1ef-4a8b-82ba-fc92a342032e(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>1310fac0-7451-4b74-bca2-3398d6dd1e73
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Enable-MalwareFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Enable-MalwareFilterRule cmdlet to enable malware filter rules in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Enable</command:verb>
    <command:noun>MalwareFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Enable-MalwareFilterRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the malware filter rule that you want to enable. You can use any value that uniquely identifies the rule. For example, you can use the name, GUID or distinguished name (DN) of the malware filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables the disabled malware filter rule named Contoso Recipients.</maml:para>
        <maml:para />
        <maml:para>Enable-MalwareFilterRule "Contoso Recipients"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/1310fac0-7451-4b74-bca2-3398d6dd1e73(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>1566222b-407a-4e78-a0df-5190b23d53da
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-SystemMessage</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-SystemMessage cmdlet to delete customized delivery status notification (DSN) or quota messages on Mailbox servers or Edge Transport servers.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>SystemMessage</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-SystemMessage</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">SystemMessageIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the DSN or quota message you want to remove.</maml:para>
        <maml:para>You can also identify a customized DSN message by using the following format: language\internal | external\system code. For more information about the syntax of the DSN message identity, see DSN message identity.</maml:para>
        <maml:para>You can identify a customized quota message by using the following format: Language\QuotaMessageType. Language is expressed as the two-character locale code. QuotaMessageType accepts the following values:</maml:para>
        <maml:para>Quota message types related to mailbox size:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitSendReceiveMailBox Issued when a mailbox exceeds its ProhibitSendReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProhibitSendMailbox Issued when a mailbox exceeds its ProhibitSendQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailbox Issued when a mailbox that has a ProhibitSendQuota limit or a ProhibitSendReceiveQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxUnlimitedSize Issued when a mailbox that doesn't have a ProhibitSendQuota limit or a ProhibitSendReceiveQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to public folder size:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitPostPublicFolder Issued when a public folder exceeds its ProhibitPostQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningPublicFolder Issued when a public folder that has a ProhibitPostQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningPublicFolderUnlimitedSize Issued when a public folder that doesn't have a ProhibitPostQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of messages allowed in a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveMailboxMessagesPerFolderCount Issued when a mailbox exceeds its MailboxMessagesPerFolderCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxMessagesPerFolderCount Issued when a mailbox that has a MailboxMessagesPerFolderCountReceiveQuota limit configured exceeds its MailboxMessagesPerFolderCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxMessagesPerFolderUnlimitedCount Issued when a mailbox that doesn't have a MailboxMessagesPerFolderCountReceiveQuota limit configured exceeds its MailboxMessagesPerFolderCountWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of subfolders that can be created in a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveFolderHierarchyChildrenCountCount Issued when a mailbox exceeds its FolderHierarchyChildrenCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyChildrenCount Issued when a mailbox that has a FolderHierarchyChildrenCountReceiveQuota limit configured exceeds its FolderHierarchyChildrenCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyChildrenUnlimitedCount Issued when a mailbox that doesn't have a FolderHierarchyChildrenCountReceiveQuota limit configured exceeds its FolderHierarchyChildrenCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFoldersCount Issued when the number of folders in the hierarchy exceeds the FoldersCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProhibitReceiveFoldersCount Issued when new public folder creation fails because the public folder hierarchy is too big and has reached the FoldersCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFoldersCountUnlimited Issued when the public folder hierarchy is getting too big and does not have the FoldersCountReceiveQuota limit configured.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of levels allowed in the folder hierarchy of a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveFolderHierarchyDepth Issued when a mailbox exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyDepth Issued when a mailbox that has a FolderHierarchyDepthReceiveQuota limit configured exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyDepthUnlimited Issued when a mailbox that doesn't have a FolderHierarchyDepthReceiveQuota limit configured exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">SystemMessageIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>SystemMessageIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes a customized DSN message for the DSN code 5.7.9.</maml:para>
        <maml:para />
        <maml:para>Remove-SystemMessage En\Internal\5.7.9</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes a customized quota message for a mailbox size warning.</maml:para>
        <maml:para />
        <maml:para>Remove-SystemMessage En\WarningMailbox</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>DSN messages are issued to the sender of email messages that haven't reached their intended recipients. Quota messages are issued to users whose mailboxes or public folders have reached the specific warning, prohibit send, or prohibit receive quotas. Customized DSN and quota messages replace the built-in DSN or quota messages included with Exchange.</maml:para>
    <maml:para>Only customized DSN and quota messages can be removed from the server. Built-in DSN and quota messages can't be removed. When a customized DSN or quota message is removed, the message text reverts to the built-in text included with Exchange.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "DSNs" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/1566222b-407a-4e78-a0df-5190b23d53da(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>15d5987b-bedd-437e-b86a-6b0e80619fde
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-Message</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-Message cmdlet to delete a message from a queue on a Mailbox server or an Edge Transport server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>Message</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-Message</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MessageIdentity</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithNDR</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Remove-Message</maml:name>
      <command:parameter required="True">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithNDR</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter specifies one or more messages by using OPath filter syntax. The OPath filter includes a message property name followed by a comparison operator and value, for example, {FromAddress -like "*@contoso.com"}. For details about filterable message properties and comparison operators, see Message filters and Use the Exchange Management Shell to manage queues.</maml:para>
        <maml:para>You can specify multiple criteria by using the and comparison operator. Property values that aren't expressed as an integer must be enclosed in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the message. Valid input for this parameter uses the syntax Server\Queue\MessageInteger or Queue\MessageInteger or MessageInteger, for example, Mailbox01\contoso.com\5 or 10. For details about message identity, see the "Message identity" section in Use the Exchange Management Shell to manage queues.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageIdentity</command:parameterValue>
      <dev:type>
        <maml:name>MessageIdentity</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
        <maml:para>You can use the Server parameter and the Filter parameter in the same command. You can't use the Server parameter and the Identity parameter in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WithNDR</maml:name>
      <maml:description>
        <maml:para>The WithNDR parameter specifies whether a non-delivery report (NDR) is returned to the sender of a message. The default value is $true. This parameter can be used with both the Identity parameter and Filter parameter sets.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes all messages that meet the following criteria without generating NDRs:</maml:para>
        <maml:para />
        <maml:para>The messages are sent by the sender Kweku@contoso.com.</maml:para>
        <maml:para>The messages are queued on the server Server1.</maml:para>
        <maml:para>Remove-Message -Server Server1 -Filter {FromAddress -eq "Kweku@contoso.com"} -WithNDR $false</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>A message being transmitted to multiple recipients might be located in multiple queues. If you specify an Identity parameter, the message is removed from a single queue if that identity matches only a single message. If the identity matches more than one message, you receive an error. To remove a message from more than one queue in a single operation, you must use the Filter parameter. If you try to remove a message currently being delivered, the message status changes to PendingDelete. Message delivery isn't interrupted, but if the delivery fails and causes the message to re-enter the queue, it's then removed.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/15d5987b-bedd-437e-b86a-6b0e80619fde(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>1c643de6-e485-4f42-a202-40960764faeb
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-PolicyTipConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-PolicyTipConfig cmdlet to modify custom Policy Tips in your organization. You can't modify built-in Policy Tips.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>PolicyTipConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-PolicyTipConfig</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">PolicyTipConfigIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Value</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the custom Policy Tip you want to modify. You can use any value that uniquely identifies the custom Policy Tip. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>&lt;Locale&gt;\&lt;Action&gt;: Locale is a supported locale code. For example, en for English or fr for French. For more information about supported locales, see Supported languages for system messages. Action is one of the following Policy Tip actions: NotifyOnly, RejectOverride or Reject.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The value Url</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">PolicyTipConfigIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>PolicyTipConfigIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the custom Policy Tip you want to modify. Valid input for this parameter is one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>&lt;Locale&gt;\&lt;Action&gt;: Locale is a supported locale code. For example, en for English or fr for French. For more information about supported locales, see Supported languages for system messages. Action is one of the following Policy Tip actions: NotifyOnly, RejectOverride or Reject.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The value Url</maml:para>
        </command:listItem></command:list>
        <maml:para>There can be only one custom Policy Tip with the value Url for the Name parameter. For the remaining Policy Tip actions, there can be only one custom Policy Tip for each combination of locale and action. For example, there can be only one custom Policy Tip with the Name value en\NotifyOnly, but you can create additional custom Policy Tips with the values de\NotifyOnly and fr\NotifyOnly for the Name parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Value</maml:name>
      <maml:description>
        <maml:para>The Value parameter specifies the text that's displayed by the Policy Tip. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the custom English Policy Tip with the action value NotifyOnly. The text of this custom Policy Tip is changed to the following value: "This message contains content that is restricted by Contoso company policy."</maml:para>
        <maml:para />
        <maml:para>Set-PolicyTipConfig en\NotifyOnly "This message contains content that is restricted by Contoso company policy."</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example replaces the text of all custom Spanish Policy Tips with the value, "Este mensaje contiene contenido que está restringida por la política de Contoso."</maml:para>
        <maml:para />
        <maml:para>Get-PolicyTipConfig -Locale es | Set-PolicyTipConfig -Value "Este mensaje contiene contenido que está restringida por la política de Contoso."</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/1c643de6-e485-4f42-a202-40960764faeb(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>1e508447-a322-4a31-a80c-ab0471422fe2
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Import-DlpPolicyTemplate</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Import-DlpPolicyTemplate cmdlet to import a data loss prevention (DLP) policy template file into your Exchange organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Import</command:verb>
    <command:noun>DlpPolicyTemplate</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Import-DlpPolicyTemplate</maml:name>
      <command:parameter required="True">
        <maml:name>FileData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="True" position="1">
      <maml:name>FileData</maml:name>
      <maml:description>
        <maml:para>The FileData parameter specifies the DLP policy template file you want to import.</maml:para>
        <maml:para>For more information about the syntax required to use this parameter, see Syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example imports the DLP policy template file C:\My Documents\External DLP Policy Template.xml.</maml:para>
        <maml:para />
        <maml:para>Import-DlpPolicyTemplate -FileData ([Byte[]]$(Get-Content -Path "C:\My Documents\External DLP Policy Template.xml" -Encoding Byte -ReadCount 0))</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/1e508447-a322-4a31-a80c-ab0471422fe2(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>203d2fa8-83fe-4643-bbc2-db746ffd76a7
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Enable-TransportRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Enable-TransportRule cmdlet to enable a specific transport rule for messages that pass through the Transport service on a Mailbox server.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Enable</command:verb>
    <command:noun>TransportRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Enable-TransportRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mode</maml:name>
        <command:parameterValue required="True">Audit | AuditAndNotify | Enforce</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the rule you want to turn on. Enter either the name or the GUID of the rule. You can omit this parameter label.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mode</maml:name>
      <maml:description>
        <maml:para>The Mode parameter specifies in which mode this rule will operate after it's turned on. Valid values for this parameter include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Audit The rule is turned on, and what would have happened if the rule was enforced is logged in message tracking logs. Exchange doesn't take any action that impacts the delivery of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AuditAndNotify The rule is turned on, and it operates the same way it would in Audit mode, but notifications are also enabled.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Enforce The rule is turned on, and all actions specified in the rule are taken.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is Enforce.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Audit | AuditAndNotify | Enforce</command:parameterValue>
      <dev:type>
        <maml:name>Audit | AuditAndNotify | Enforce</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables the transport rule Disclaimer-Finance.</maml:para>
        <maml:para />
        <maml:para>Enable-TransportRule "Disclaimer-Finance"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables the transport rule Require approval of messages to contoso.com in audit mode, so you can see how the rule would function by analyzing the related entries in message tracking logs.</maml:para>
        <maml:para />
        <maml:para>Enable-TransportRule "Require approval of messages to contoso.com" -Mode Audit</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can turn specific transport rules on or off in your organization at any time using the Enable-TransportRule and Disable-TransportRule cmdlets. To learn more about transport rules, see Transport rules.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport rules" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/203d2fa8-83fe-4643-bbc2-db746ffd76a7(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>248138e5-6da4-4652-9cde-f8060c4a854c
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Redirect-Message</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Redirect-Message cmdlet to drain the active messages from all the delivery queues on a Mailbox server, and transfer those messages to another Mailbox server.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Redirect</command:verb>
    <command:noun>Message</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Redirect-Message</maml:name>
      <command:parameter required="True">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Target</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para />
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Target</maml:name>
      <maml:description>
        <maml:para>The Target parameter specifies the target Mailbox server where you want to transfer the messages from the drained delivery queues. Enter the server name as a fully qualified domain name (FQDN).</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example drains the active messages from the delivery queues on the Mailbox server named Mailbox01, and transfers the messages to the server named Mailbox02.</maml:para>
        <maml:para />
        <maml:para>Redirect-Message -Server Mailbox01 -Target Mailbox02</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>When a message queue is drained, the active messages in the queues on the source Mailbox server are routed to the target Mailbox server. After the messages are received and queued by the target Mailbox server, the messages are made redundant. Other considerations include the following:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>Only active messages are drained. Shadow queues aren't drained.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Messages in the poison message queue aren't drained.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>The source server won't accept new messages while the queues are drained.</maml:para>
    </command:listItem></command:list>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/248138e5-6da4-4652-9cde-f8060c4a854c(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>2c6b8ee8-1ff0-4353-845c-f3ea9778abc3
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-InboxRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the New-InboxRule cmdlet to create an Inbox rule for a mailbox. Inbox rules are used to process messages in the Inbox based on conditions specified and take actions such as moving a message to a specified folder or deleting a message.</maml:para>
      <maml:para>You must have adequate permissions on the mailbox to create an Inbox rule.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>InboxRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-InboxRule</maml:name>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyCategory</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BodyContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CopyToFolder</maml:name>
        <command:parameterValue required="True">MailboxFolderIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeleteMessage</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfBodyContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFlaggedForAction</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFrom</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromAddressContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHasAttachment</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHasClassification</maml:name>
        <command:parameterValue required="True">MessageClassificationIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHeaderContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMessageTypeMatches</maml:name>
        <command:parameterValue required="True">AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMyNameInCcBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMyNameInToBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMyNameInToOrCcBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMyNameNotInToBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfReceivedAfterDate</maml:name>
        <command:parameterValue required="True">ExDateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfReceivedBeforeDate</maml:name>
        <command:parameterValue required="True">ExDateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentOnlyToMe</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectOrBodyContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfWithImportance</maml:name>
        <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfWithinSizeRangeMaximum</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfWithinSizeRangeMinimum</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfWithSensitivity</maml:name>
        <command:parameterValue required="True">Normal | Personal | Private | CompanyConfidential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlaggedForAction</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForwardAsAttachmentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForwardTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>From</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromAddressContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HasAttachment</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HasClassification</maml:name>
        <command:parameterValue required="True">MessageClassificationIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HeaderContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsRead</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkImportance</maml:name>
        <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTypeMatches</maml:name>
        <command:parameterValue required="True">AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MoveToFolder</maml:name>
        <command:parameterValue required="True">MailboxFolderIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MyNameInCcBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MyNameInToBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MyNameInToOrCcBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MyNameNotInToBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Priority</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceivedAfterDate</maml:name>
        <command:parameterValue required="True">ExDateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceivedBeforeDate</maml:name>
        <command:parameterValue required="True">ExDateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RedirectTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendTextMessageNotificationTo</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentOnlyToMe</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>StopProcessingRules</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectOrBodyContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithImportance</maml:name>
        <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithinSizeRangeMaximum</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithinSizeRangeMinimum</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithSensitivity</maml:name>
        <command:parameterValue required="True">Normal | Personal | Private | CompanyConfidential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AlwaysDeleteOutlookRulesBlob</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromSubscription</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdentity[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromSubscription</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdentity[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>New-InboxRule</maml:name>
      <command:parameter required="True">
        <maml:name>FromMessageId</maml:name>
        <command:parameterValue required="True">MailboxStoreObjectIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>ValidateOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AlwaysDeleteOutlookRulesBlob</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromSubscription</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdentity[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromSubscription</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdentity[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromMessageId</maml:name>
      <maml:description>
        <maml:para>The FromMessageId parameter specifies a message ID to create an Inbox rule based on the properties of that message. You must specify the Base64-encoded StoreObjectId of the message. Valid values include one of the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>MailboxId\StoreObjectId</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>StoreObjectId</maml:para>
        </command:listItem></command:list>
        <maml:para>When you create an Inbox rule by specifying the FromMessageId parameter, the following properties of that message are used to create the rule:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Subject The message subject is added to the SubjectContainsWords property of the rule.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>From The message sender is added to the From property of the rule.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>To and Ccrecipients Recipients in the To and Cc fields of the message are added to the SentTo property of the rule.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxStoreObjectIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxStoreObjectIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a name for the Inbox rule being created.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ValidateOnly</maml:name>
      <maml:description>
        <maml:para>The ValidateOnly switch tells the cmdlet to evaluate the conditions and requirements necessary to perform the operation and then reports whether the operation will succeed or fail. No changes are made when the ValidateOnly switch is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AlwaysDeleteOutlookRulesBlob</maml:name>
      <maml:description>
        <maml:para>The AlwaysDeleteOutlookRulesBlob parameter suppresses a warning that end users or administrators get if they use Outlook Web App or Windows PowerShell to modify Inbox rules.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyCategory</maml:name>
      <maml:description>
        <maml:para>The ApplyCategory parameter specifies one or more categories to apply to a message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The BodyContainsWords parameter specifies one or more words or phrases to check the message body for. If phrases contain a space, you must enclose it in quotation marks ("). Use a comma to separate phrases.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CopyToFolder</maml:name>
      <maml:description>
        <maml:para>The CopyToFolder parameter specifies the name of an existing mailbox folder to copy the message to.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxFolderIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxFolderIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeleteMessage</maml:name>
      <maml:description>
        <maml:para>The DeleteMessage parameter specifies whether the message is sent to the Deleted Items folder. If set to $true, the message is sent to the Deleted Items folder.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfBodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfBodyContainsWords parameter specifies one or more words or phrases to check the message body for. If the message body contains the specified words or phrases, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFlaggedForAction</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFlaggedForAction parameter specifies one or more message flags for which to check. You can use the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Any</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Call</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DoNotForward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FollowUp</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ForYourInformation</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Forward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NoResponseNecessary</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Read</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Reply</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReplyToAll</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Review</maml:para>
        </command:listItem></command:list>
        <maml:para>If the requested action in the message matches the requested action specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFrom</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFrom parameter specifies a recipient to check in the From field of the message. If the message sender matches the senders specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFromAddressContainsWords parameter specifies one or more words to check in the sender's address. If the sender's address contains the specified words, the Inbox rule action isn't applied to the message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromSubscription</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The ExceptIfFromSubscription parameter specifies an exception when a message is received from a POP, IMAP, or Hotmail subscription.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdentity[]</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdentity[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHasAttachment</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHasAttachment parameter specifies whether the rule should apply to messages with attachments. Valid values include $true and $false. We recommend that you set the value to $true.</maml:para>
        <maml:para>If the ExceptIfHasAttachment parameter is set to $true and the message has an attachment, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHasClassification</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHasClassification parameter checks the message for the specified classification name. Use the Get-MessageClassification cmdlet to retrieve a list of classifications defined in the organization.</maml:para>
        <maml:para>If the message classification matches the classification specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageClassificationIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>MessageClassificationIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHeaderContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHeaderContainsWords parameter specifies one or more words to check for in the specified message header.</maml:para>
        <maml:para>If the message header contains the words specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMessageTypeMatches</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMessageTypeMatches parameter specifies a message type. You can use the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AutomaticReply</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AutomaticForward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Encrypted</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Calendaring</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CalendaringResponse</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PermissionControlled</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Voicemail</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Signed</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ApprovalRequest</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReadReceipt</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NonDeliveryReport</maml:para>
        </command:listItem></command:list>
        <maml:para>If the message type equals one of the preceding values, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</command:parameterValue>
      <dev:type>
        <maml:name>AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMyNameInCcBox</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMyNameInCcBox parameter specifies that the Cc field of messages be checked for the mailbox owner's address.</maml:para>
        <maml:para>This parameter accepts $true or $false.</maml:para>
        <maml:para>If the name of the recipient whose Inbox is being edited is in the Cc box, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMyNameInToBox</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMyNameInToBox parameter specifies that the To field of messages be checked for the mailbox owner's address.</maml:para>
        <maml:para>If the name of the recipient whose Inbox is being edited is in the To box, the Inbox rule action isn't applied.</maml:para>
        <maml:para>This parameter accepts $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMyNameInToOrCcBox</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMyNameInToOrCcBox parameter specifies that the To or Cc fields of messages be checked for the mailbox owner's address.</maml:para>
        <maml:para>If the name of the recipient whose Inbox is being edited is in the To or Cc box, the Inbox rule action isn't applied.</maml:para>
        <maml:para>This parameter accepts $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMyNameNotInToBox</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMyNameNotInToBox parameter matches messages where the mailbox owner isn't addressed in the To field of the message.</maml:para>
        <maml:para>If the name of the recipient whose Inbox is being edited is not in the To box, the Inbox rule action isn't applied.</maml:para>
        <maml:para>This parameter accepts $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfReceivedAfterDate</maml:name>
      <maml:description>
        <maml:para>The ExceptIfReceivedAfterDate parameter specifies to check for messages received after the specified date.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
        <maml:para>If the message was received after the date specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExDateTime</command:parameterValue>
      <dev:type>
        <maml:name>ExDateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfReceivedBeforeDate</maml:name>
      <maml:description>
        <maml:para>The ExceptIfReceivedBeforeDate parameter specifies to check for messages received before the specified date.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
        <maml:para>If the message was received before the time specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExDateTime</command:parameterValue>
      <dev:type>
        <maml:name>ExDateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientAddressContainsWords parameter specifies one or more words to check in the message recipient's address.</maml:para>
        <maml:para>If the recipient address contains one or more words specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentOnlyToMe</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentOnlyToMe parameter specifies to check for messages where the mailbox owner is the only recipient.</maml:para>
        <maml:para>This parameter accepts $true or $false.</maml:para>
        <maml:para>If the message is only sent to the recipient whose Inbox rule is being edited, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentTo</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentTo parameter specifies to check message recipients for the recipient specified.</maml:para>
        <maml:para>If the message was sent to the recipient specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectContainsWords parameter specifies one or more words or phrases to check in the message subject.</maml:para>
        <maml:para>If the message subject contains one or more words or phrases specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectOrBodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectOrBodyContainsWords parameter specifies one or more words or phrases to check in the message subject or body.</maml:para>
        <maml:para>If the message subject or body contains one or more of the words or phrases specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfWithImportance</maml:name>
      <maml:description>
        <maml:para>The ExceptIfWithImportance parameter specifies a message importance level. Valid values include one of the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Low</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>High</maml:para>
        </command:listItem></command:list>
        <maml:para>If the message importance matches the importance specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Normal | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfWithinSizeRangeMaximum</maml:name>
      <maml:description>
        <maml:para>The ExceptIfWithinSizeRangeMaximum parameter specifies the maximum message size. When using this parameter, you must also specify the minimum message size value using the ExceptIfWithinSizeRangeMinimum parameter.</maml:para>
        <maml:para>If the message size exceeds the maximum value specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfWithinSizeRangeMinimum</maml:name>
      <maml:description>
        <maml:para>The ExceptIfWithinSizeRangeMinimum parameter specifies the minimum message size. When using this parameter, you must also specify a maximum message size value using the ExceptIfWithinSizeRangeMaximum parameter.</maml:para>
        <maml:para>If the message size is smaller than the minimum value specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfWithSensitivity</maml:name>
      <maml:description>
        <maml:para>The ExceptIfWithSensitivity parameter specifies a message sensitivity level. You can use the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Personal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Private</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CompanyConfidential</maml:para>
        </command:listItem></command:list>
        <maml:para>If the sensitivity matches the sensitivity value specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Normal | Personal | Private | CompanyConfidential</command:parameterValue>
      <dev:type>
        <maml:name>Normal | Personal | Private | CompanyConfidential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlaggedForAction</maml:name>
      <maml:description>
        <maml:para>The FlaggedForAction parameter specifies one or more message flags for which to check. Values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Any</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Call</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DoNotForward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FollowUp</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ForYourInformation</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Forward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NoResponseNecessary</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Read</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Reply</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReplyToAll</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Review</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether the command suppresses the confirmation prompt produced if rules created by Microsoft Outlook exist on the mailbox. When taking an action using Inbox rules on Exchange 2013, any client-side rules are removed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ForwardAsAttachmentTo</maml:name>
      <maml:description>
        <maml:para>The ForwardAsAttachmentTo parameter specifies a recipient to forward the message to as an attachment.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ForwardTo</maml:name>
      <maml:description>
        <maml:para>The ForwardTo parameter specifies a recipient to forward the message to.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>From</maml:name>
      <maml:description>
        <maml:para>The From parameter specifies the identity of the sender as a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The FromAddressContainsWords parameter specifies one or more words to check in the From field of the message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromSubscription</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The FromSubscription parameter specifies the condition when a message is received from a POP, IMAP, or Hotmail subscription.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdentity[]</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdentity[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HasAttachment</maml:name>
      <maml:description>
        <maml:para>The HasAttachment parameter specifies whether to check for messages with attachments.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HasClassification</maml:name>
      <maml:description>
        <maml:para>The HasClassification parameter checks messages for the specified message classification.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageClassificationIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>MessageClassificationIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HeaderContainsWords</maml:name>
      <maml:description>
        <maml:para>The HeaderContainsWords parameter specifies one or more words to match in the specified message header.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the identity of the mailbox for which the rule is being created. The following values can be used:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Domain\Account</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User principal name (UPN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SmtpAddress</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsRead</maml:name>
      <maml:description>
        <maml:para>The MarkAsRead parameter specifies whether to mark the message as read. When set to $true, the MarkAsRead parameter marks the message as read.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkImportance</maml:name>
      <maml:description>
        <maml:para>The MarkImportance parameter specifies that the message importance be marked with one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Low</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>High</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Normal | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTypeMatches</maml:name>
      <maml:description>
        <maml:para>The MessageTypeMatches parameter specifies a message type. You can use the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AutomaticReply</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AutomaticForward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Encrypted</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Calendaring</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CalendaringResponse</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PermissionControlled</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Voicemail</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Signed</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ApprovalRequest</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReadReceipt</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NonDeliveryReport</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</command:parameterValue>
      <dev:type>
        <maml:name>AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MoveToFolder</maml:name>
      <maml:description>
        <maml:para>The MoveToFolder parameter specifies an existing mailbox folder to which the message is copied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxFolderIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxFolderIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MyNameInCcBox</maml:name>
      <maml:description>
        <maml:para>The MyNameInCcBox parameter specifies that the mailbox for which the rule is being created should appear in the Cc field of the message. To use this predicate, set the value to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MyNameInToBox</maml:name>
      <maml:description>
        <maml:para>The MyNameInToBox parameter specifies that the mailbox for which the rule is being created should appear in the To field of the message. To use this predicate, set the value to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MyNameInToOrCcBox</maml:name>
      <maml:description>
        <maml:para>The MyNameInToOrCcBox parameter specifies that the mailbox for which the rule is being created should appear in the To or Cc fields of the message. To add this condition, set the value to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MyNameNotInToBox</maml:name>
      <maml:description>
        <maml:para>The MyNameNotInToBox parameter checks that the mailbox owner's name isn't in the To box. We recommend that you set the value to $true to use this predicate.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Priority</maml:name>
      <maml:description>
        <maml:para>The Priority parameter sets a priority for the Inbox rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceivedAfterDate</maml:name>
      <maml:description>
        <maml:para>The ReceivedAfterDate parameter specifies a date. The rule is applied to messages received after the specified date.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExDateTime</command:parameterValue>
      <dev:type>
        <maml:name>ExDateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceivedBeforeDate</maml:name>
      <maml:description>
        <maml:para>The ReceivedBeforeDate parameter specifies a date. The rule is applied only to messages received before the specified date.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExDateTime</command:parameterValue>
      <dev:type>
        <maml:name>ExDateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The RecipientAddressContainsWords parameter specifies one or more words to check for in a recipient address.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RedirectTo</maml:name>
      <maml:description>
        <maml:para>The RedirectTo parameter specifies a recipient to redirect the message to.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendTextMessageNotificationTo</maml:name>
      <maml:description>
        <maml:para>The SendTextMessageNotificationTo parameter specifies one or more text message recipients to send a notification to.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentOnlyToMe</maml:name>
      <maml:description>
        <maml:para>The SentOnlyToMe parameter specifies whether the mailbox owner is specified as the only recipient. You can use the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>$true</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>$false</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentTo</maml:name>
      <maml:description>
        <maml:para>The SentTo parameter specifies the identity of a recipient as a condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>StopProcessingRules</maml:name>
      <maml:description>
        <maml:para>The StopProcessingRules parameter specifies that Exchange stop processing additional rules if the conditions of this Inbox rule are met.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectContainsWords</maml:name>
      <maml:description>
        <maml:para>The SubjectContainsWords parameter specifies one or more keywords to be matched in the subject field of a message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectOrBodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The SubjectOrBodyContainsWords parameter specifies one or more words to be matched in the message subject or body.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WithImportance</maml:name>
      <maml:description>
        <maml:para>The WithImportance parameter checks messages with the specified importance level. You can use the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>High</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Low</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Normal | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WithinSizeRangeMaximum</maml:name>
      <maml:description>
        <maml:para>The WithinSizeRangeMaximum parameter specifies the maximum message size. When using this parameter, you must also specify a minimum message size value using the WithinSizeRangeMinimum parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WithinSizeRangeMinimum</maml:name>
      <maml:description>
        <maml:para>The WithinSizeRangeMinimum parameter specifies the minimum message size. When using this parameter, you must also specify a maximum message size value using the WithinSizeRangeMaximum parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WithSensitivity</maml:name>
      <maml:description>
        <maml:para>The WithSensitivity parameter specifies a message sensitivity level. Valid values include one of the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Personal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Private</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CompanyConfidential</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Normal | Personal | Private | CompanyConfidential</command:parameterValue>
      <dev:type>
        <maml:name>Normal | Personal | Private | CompanyConfidential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example raises the message importance to High if the mailbox owner is in the To field. In addition, the message is flagged for action.</maml:para>
        <maml:para />
        <maml:para>New-InboxRule "CheckActionRequired" -MyNameInToBox $true -FlaggedForAction Any -MarkImportance "High"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The New-InboxRule cmdlet exposes rule predicates and actions, in addition to the parameters such as a rule name and the mailbox identity, required to create an Inbox rule.</maml:para>
    <maml:para>When you create, modify, remove, enable, or disable an Inbox rule on Microsoft Exchange Server 2013, any client-side rules created by Microsoft Outlook are removed.</maml:para>
    <maml:para>Predicate parameters used for conditions, such as SubjectOrBodyContainsWords, also have an exception parameter. When conditions specified in an exception are matched, the rule isn't applied to the message. Exception parameters begin with ExceptIf. For example, the exception parameter for SubjectOrBodyContainsWords is ExceptIfSubjectOrBodyContainsWords.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbox rules" entry in the Recipients Permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/2c6b8ee8-1ff0-4353-845c-f3ea9778abc3(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>2df13ba9-1eb0-4da3-bd72-a79d5fa15e26
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-HostedContentFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the New-HostedContentFilterRule cmdlet to create content filter rules in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>HostedContentFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-HostedContentFilterRule</maml:name>
      <command:parameter required="True">
        <maml:name>HostedContentFilterPolicy</maml:name>
        <command:parameterValue required="True">HostedContentFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comments</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Priority</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HostedContentFilterPolicy</maml:name>
      <maml:description>
        <maml:para>The HostedContentFilterPolicy parameter specifies the content filter policy to apply to messages that match the conditions defined by this content filter rule.</maml:para>
        <maml:para>You can use any value that uniquely identifies the policy. For example, you can specify the name, GUID, or distinguished name (DN) of the content filter policy.</maml:para>
        <maml:para>You can't specify the default content filter policy. And, you can't specify a content filter policy that's already associated with another content filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HostedContentFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>HostedContentFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the content filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comments</maml:name>
      <maml:description>
        <maml:para>The Comments parameter specifies informative comments for the rule, such as what the rule is used for or how it has changed over time. The length of the comment can't exceed 1024 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter enables or disables the rule. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientDomainIs parameter specifies the recipient's domain. The rule isn't applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentTo</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentTo parameter specifies a recipient. The rule isn't applied to messages sent to the specified recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentToMemberOf parameter specifies a distribution group. The rule isn't applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no exception is made.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Priority</maml:name>
      <maml:description>
        <maml:para>The Priority parameter specifies the priority for this rule. Rules with a lower priority value are processed first. If you modify the priority of the rule, the position of the rule in the rule list changes to match the priority that you specified.</maml:para>
        <maml:para>The value of this parameter must be greater than or equal to 0, and must be one less than the total number of rules in your organization. For example, if you configured 8 rules, you can set this parameter to any value from 0 through 7.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The RecipientDomainIs parameter specifies the recipient's domain. The rule is applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentTo</maml:name>
      <maml:description>
        <maml:para>The SentTo parameter specifies a recipient. The rule is applied to messages sent to the specified recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The SentToMemberOf parameter specifies a distribution group. The rule is applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no action is taken.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a new content filter rule named Contoso Recipients with the following settings: If the recipient is in the domain contoso.com, apply the content filter policy named Contoso Content Filter Policy.</maml:para>
        <maml:para />
        <maml:para>New-HostedContentFilterRule -Name "Contoso Recipients" -HostedContentFilterPolicy "Contoso Content Filter Policy" -RecipientDomainIs contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/2df13ba9-1eb0-4da3-bd72-a79d5fa15e26(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3054220d-0973-4832-840e-b9ef9e7c9064
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-TransportRulePredicate</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-TransportRulePredicate cmdlet to retrieve a list of all available rule conditions (predicates) that can be used when creating a transport rule.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>TransportRulePredicate</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-TransportRulePredicate</maml:name>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the condition to display. For a list of values that can be used with this parameter on the server role that you're administering, see Transport rule conditions (predicates).</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns all available conditions for transport rules.</maml:para>
        <maml:para />
        <maml:para>Get-TransportRulePredicate</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves the single condition SubjectMatches. The command is piped to the Format-List command to display detailed transport rule condition information.</maml:para>
        <maml:para />
        <maml:para>Get-TransportRulePredicate -Name SubjectMatches | Format-List</maml:para>
        <maml:para>For more information about pipelining, see Pipelining. For more information about how to work with the output of a command, see Working with command output.</maml:para>
        <maml:para />
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns the list of all transport rule conditions related to message attachments by filtering the output..</maml:para>
        <maml:para />
        <maml:para>Get-TransportRulePredicate | Where {$_.Name -like '*Attachment*'}</maml:para>
        <maml:para>For more information about how to work with the output of a command, see Working with command output</maml:para>
        <maml:para />
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-TransportRulePredicate cmdlet displays a list of available rule conditions that you can use in transport rules.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport rules" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3054220d-0973-4832-840e-b9ef9e7c9064(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>337ad811-fbae-4dff-9608-3abf5e1cc431
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-MalwareFilteringServer</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-MalwareFilteringServer cmdlet to view the Malware agent settings in the Transport service on a Mailbox server.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>MalwareFilteringServer</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-MalwareFilteringServer</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MalwareFilteringServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server where you want to view the anti-malware settings. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MalwareFilteringServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MalwareFilteringServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays a summary of the Exchange Malware agent settings on all Mailbox servers in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-MalwareFilteringServer</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns the detailed Exchange Malware agent settings on a Mailbox server named Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Get-MalwareFilteringServer Mailbox01 | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/337ad811-fbae-4dff-9608-3abf5e1cc431(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>34036966-9014-4096-9e2d-82a01889dbe4
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Export-Message</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Export-Message cmdlet to copy a message from a queue on a Mailbox server or an Edge Transport server to a specified file path in your organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Export</command:verb>
    <command:noun>Message</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Export-Message</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MessageIdentity</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the message. Valid input for this parameter uses the syntax Server\Queue\MessageInteger or Queue\MessageInteger or MessageInteger, for example, Mailbox01\contoso.com\5 or 10. For details about message identity, see the "Message identity" section in Use the Exchange Management Shell to manage queues.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageIdentity</command:parameterValue>
      <dev:type>
        <maml:name>MessageIdentity</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example exports a single message to the specified file path. Because the Export-Message cmdlet returns a binary object, you must use the AssembleMessage filter to be able to save the message content into a specified location.</maml:para>
        <maml:para />
        <maml:para>Export-Message ExchSrv1\contoso.com\1234 | AssembleMessage -Path "c:\exportfolder\filename.eml"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves all messages from the specified queue. The query results are then piped to the Export-Message command, and all the messages are copied to individual .eml files. The Internet Message IDs of each message are used as the file names. To accomplish this, the command does the following:</maml:para>
        <maml:para />
        <maml:para>Retrieves all messages in a specific queue using the Get-Message cmdlet.</maml:para>
        <maml:para>The result is pipelined into the ForEach-Object cmdlet, which prepares a file name including full path using the temporary variable $Temp that consists of the Internet Message ID with .eml extension. The Internet Message ID field contains angled brackets ("&gt;" and "&lt;") which need to be removed as they are invalid file names. This is done using the Replace method of the temporary variable.</maml:para>
        <maml:para>The ForEach-Object cmdlet also exports the message using the file name prepared.</maml:para>
        <maml:para>Get-Message -Queue "Server1\contoso.com" | ForEach-Object {$Temp="C:\ExportFolder\"+$_.InternetMessageID+".eml";$Temp=$Temp.Replace("&lt;","_");$Temp=$Temp.Replace("&gt;","_");Export-Message $_.Identity | AssembleMessage -Path $Temp}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Export-Message cmdlet copies messages from the Delivery queue, the Unreachable queue, or the poison message queue on Mailbox server or an Edge Transport server to a specified file path. Before you export a message, you must first suspend the message. Messages in the poison message queue are already suspended. You can use the Export-Message cmdlet to copy messages to the Replay directory of another Mailbox server for delivery.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/34036966-9014-4096-9e2d-82a01889dbe4(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>34ef07d4-b055-4f33-bb88-15e41e0386db
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-PerimeterConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-PerimeterConfig cmdlet to view the list of gateway server and internal mail server IP addresses that have been added to the cloud-based safelists.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>PerimeterConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-PerimeterConfig</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns the list of gateway servers and internal mail servers in your organization that have been added to cloud-based safelists.</maml:para>
        <maml:para />
        <maml:para>Get-PerimeterConfig</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>If you have an on-premises messaging system, you can add the IP addresses of your mail servers to cloud-based safelists. Safelists are also known as whitelists. You add IP addresses to cloud-based safelists to make sure that e-mail that originates in your on-premises messaging system isn't treated as spam.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/34ef07d4-b055-4f33-bb88-15e41e0386db(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>354ece28-dcde-4b5f-88ed-475115e7ea78
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Enable-HostedContentFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Enable-HostedContentFilterRule cmdlet to enable content filter rules in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Enable</command:verb>
    <command:noun>HostedContentFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Enable-HostedContentFilterRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the content filter rule that you want to enable. You can use any value that uniquely identifies the rule. For example, you can specify the name, GUID, or distinguished name (DN) of the content filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables the disabled content filter rule named Contoso Recipients.</maml:para>
        <maml:para />
        <maml:para>Enable-HostedContentFilterRule "Contoso Recipients"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/354ece28-dcde-4b5f-88ed-475115e7ea78(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3631df19-fe68-44f6-9e91-4363e608263b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-DlpPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Remove-DlpPolicy cmdlet to remove an existing data loss prevention (DLP) policy.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>DlpPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-DlpPolicy</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the DLP policy you want to remove. You can use any value that uniquely identifies the DLP policy. For example, you can specify the name, GUID, or distinguished name (DN) of the DLP policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DlpPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the existing DLP policy named Contoso PII.</maml:para>
        <maml:para />
        <maml:para>Remove-DlpPolicy "Contoso PII"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3631df19-fe68-44f6-9e91-4363e608263b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3c35583b-8691-4ec8-83e3-daa3090a4185
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Suspend-Message</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Suspend-Message cmdlet to prevent delivery of a particular message in a queue on a Mailbox server or an Edge Transport server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Suspend</command:verb>
    <command:noun>Message</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Suspend-Message</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MessageIdentity</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Suspend-Message</maml:name>
      <command:parameter required="True">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter specifies one or more messages by using OPath filter syntax. The OPath filter includes a message property name followed by a comparison operator and value, for example, {FromAddress -like "*@contoso.com"}. For details about filterable message properties and comparison operators, see Message filters and Use the Exchange Management Shell to manage queues.</maml:para>
        <maml:para>You can specify multiple criteria by using the and comparison operator. Property values that aren't expressed as an integer must be enclosed in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the message. Valid input for this parameter uses the syntax Server\Queue\MessageInteger or Queue\MessageInteger or MessageInteger, for example, Mailbox01\contoso.com\5 or 10. For details about message identity, see the "Message identity" section in Use the Exchange Management Shell to manage queues.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageIdentity</command:parameterValue>
      <dev:type>
        <maml:name>MessageIdentity</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
        <maml:para>You can use the Server parameter and the Filter parameter in the same command. You can't use the Server parameter and the Identity parameter in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example prevents delivery of all messages for which the following conditions are true:</maml:para>
        <maml:para />
        <maml:para>The messages are sent by the sender kweku@contoso.com.</maml:para>
        <maml:para>The messages are queued on the server Server1.</maml:para>
        <maml:para>Suspend-Message -Server Server1 -Filter {FromAddress -eq "kweku@contoso.com"}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>A message already in delivery won't be suspended. Delivery will continue and the message status will be PendingSuspend. If the delivery fails, the message will re-enter the queue and it will then be suspended. You can't suspend a message that's in the Submission queue or poison message queue.</maml:para>
    <maml:para>A message being sent to multiple recipients might be located in multiple queues. If you specify an Identity parameter, the message is suspended in a single queue if that identity matches only a single message. If the identity matches more than one message, you receive an error. To suspend a message in more than one queue in a single operation, you must use the Filter parameter.</maml:para>
    <maml:para>For instructions on how to resume a suspended message, see Resume-Message.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3c35583b-8691-4ec8-83e3-daa3090a4185(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3e0e270a-ba0b-4231-a289-9a940bb63761
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-MessageTrackingLog</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-MessageTrackingLog cmdlet to search for message delivery information stored in the message tracking log.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>MessageTrackingLog</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-MessageTrackingLog</maml:name>
      <command:parameter required="False">
        <maml:name>EventId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalMessageId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageSubject</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Recipients</maml:name>
        <command:parameterValue required="True">String[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Reference</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Sender</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>End</maml:name>
        <command:parameterValue required="True">DateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Start</maml:name>
        <command:parameterValue required="True">DateTime</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>End</maml:name>
      <maml:description>
        <maml:para>The End parameter specifies the end date and time of the date range. Message delivery information is returned up to, but not including, the specified date and time.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
      </maml:description>
      <command:parameterValue required="True">DateTime</command:parameterValue>
      <dev:type>
        <maml:name>DateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EventId</maml:name>
      <maml:description>
        <maml:para>The EventId parameter filters the message tracking log entries by the value of the EventId field. The EventId value classifies classify each message event. Example values include DSN, Defer, Deliver, Send, or Receive.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalMessageId</maml:name>
      <maml:description>
        <maml:para>The InternalMessageId parameter filters the message tracking log entries by the value of the InternalMessageId field. The InternalMessageId value is a message identifier that's assigned by the Exchange server that's currently processing the message.</maml:para>
        <maml:para>The value of the internal-message-id for a specific message is different in the message tracking log of every Exchange server that's involved in the delivery of the message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageId</maml:name>
      <maml:description>
        <maml:para>The MessageId parameter filters the message tracking log entries by the value of the MessageId field. The value of MessageId corresponds to the value of the Message-Id: header field in the message. If the Message-ID header field is blank or doesn't exist, an arbitrary value is assigned.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageSubject</maml:name>
      <maml:description>
        <maml:para>The MessageSubject parameter filters the message tracking log entries by the value of the message subject. The value of the MessageSubject parameter automatically supports partial matches without using wildcards or special characters. For example, if you specify the MessageSubject value sea, the results include messages with Seattle in the subject. By default, message subjects are stored in the message tracking logs.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Recipients</maml:name>
      <maml:description>
        <maml:para>The Recipients parameter filters the message tracking log entries by the SMTP email address of the message recipients. Multiple recipients in a single message are logged in a single message tracking log entry. Unexpanded distribution group recipients are logged by using the group's SMTP email address. You can specify multiple recipient email addresses separated by commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String[]</command:parameterValue>
      <dev:type>
        <maml:name>String[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Reference</maml:name>
      <maml:description>
        <maml:para>The Reference parameter filters the message tracking log entries by the value of the Reference field. The Reference field contains additional information for specific types of events. For example, the Reference field value for a DSN message tracking entry contains the InternalMessageId value of the message that caused the DSN. For many types of events, the value of Reference is blank.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the maximum number of results to return. If you want to return all requests that match the query, use unlimited for the value of this parameter. The default value is 1000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Sender</maml:name>
      <maml:description>
        <maml:para>The Sender parameter filters the message tracking log entries by the sender's SMTP email address.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Start</maml:name>
      <maml:description>
        <maml:para>The Start parameter specifies the start date and time of the date range.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
      </maml:description>
      <command:parameterValue required="True">DateTime</command:parameterValue>
      <dev:type>
        <maml:name>DateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example searches the message tracking logs on the Mailbox server named Mailbox01 for information about all messages sent from March 13, 2013, 09:00 to March 15, 2013, 17:00 by the sender john@contoso.com.</maml:para>
        <maml:para />
        <maml:para>Get-MessageTrackingLog -Server Mailbox01 -Start "03/13/2013 09:00:00" -End "03/15/2013 17:00:00" -Sender "john@contoso.com"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>A unique message tracking log exists for the Transport service on a Mailbox server, for the Mailbox Transport service on a Mailbox server, and on an Edge Transport server. The message tracking log is a comma-separated value (CSV) file that contains detailed information about the history of each email message as it travels through an Exchange server.</maml:para>
    <maml:para>The field names displayed in the results from the Get-MessageTrackingLog cmdlet are similar to the actual field names used in the message tracking logs. The differences are:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>The dashes are removed from the field names. For example internal-message-id is displayed as InternalMessageId.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>The date-time field is displayed as Timestamp.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>The recipient-address field is displayed as Recipients.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>The sender-address field is displayed as Sender.</maml:para>
    </command:listItem></command:list>
    <maml:para>For more information about the message tracking log files, see Message tracking.</maml:para>
    <maml:para>The Get-MessageTrackingLog results are displayed on-screen. You can write the results to a file by piping the output to ConvertTo-Html or ConvertTo-Csv and adding "&gt; &lt;filename&gt;" to the command. For example:</maml:para>
    <maml:para>Get-MessageTrackingLog -Start "03/13/2014 09:00:00" -End "03/13/2014 09:10:00" | ConvertTo-Html &gt; "C:\My Documents\message track.html"</maml:para>
    <dev:code />
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Message tracking" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3e0e270a-ba0b-4231-a289-9a940bb63761(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3f2cf682-e2c9-41e3-8f30-88f6cccf7c57
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-MalwareFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the New-MalwareFilterPolicy cmdlet to create malware filter policies in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>MalwareFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-MalwareFilterPolicy</maml:name>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Action</maml:name>
        <command:parameterValue required="True">DeleteMessage | DeleteAttachmentAndUseDefaultAlertText | DeleteAttachmentAndUseCustomAlertText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdminDisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassInboundMessages</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassOutboundMessages</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomAlertText</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomExternalBody</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomExternalSubject</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomFromAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomFromName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomInternalBody</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomInternalSubject</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableExternalSenderAdminNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableExternalSenderNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableInternalSenderAdminNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableInternalSenderNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalSenderAdminAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalSenderAdminAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a name for the malware filter policy. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Action</maml:name>
      <maml:description>
        <maml:para>The Action parameter specifies the action to take when malware is detected in a message. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>BlockMessage: blocks the message when malware is detected.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReplaceWithDefaultAlert: delivers the message, but replaces the message contents with the default alert text when malware is detected.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReplaceWithCustomAlert: delivers the message, but replaces the message contents with the custom alert text specified by the AlertText parameter when malware is detected.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is BlockMessage.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DeleteMessage | DeleteAttachmentAndUseDefaultAlertText | DeleteAttachmentAndUseCustomAlertText</command:parameterValue>
      <dev:type>
        <maml:name>DeleteMessage | DeleteAttachmentAndUseDefaultAlertText | DeleteAttachmentAndUseCustomAlertText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdminDisplayName</maml:name>
      <maml:description>
        <maml:para>The AdminDisplayName parameter specifies a description for the malware filter policy. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BypassInboundMessages</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The BypassInboundMessages parameter skips or enforces malware scanning on incoming messages. Valid input for this parameter is $true or $false. The default value is $false. This means malware scanning occurs on incoming messages by default.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BypassOutboundMessages</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The BypassOutboundMessages parameter skips or enforces malware scanning on outgoing messages. Valid input for this parameter is $true or $false. The default value is $false. This means malware scanning occurs on outgoing messages by default.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomAlertText</maml:name>
      <maml:description>
        <maml:para>The CustomAlertText parameter specifies the custom alert text to insert in the message when malware is detected and the value of the Action parameter is set to ReplaceWithCustomAlert. This parameter is required when the CustomNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomExternalBody</maml:name>
      <maml:description>
        <maml:para>The CustomExternalBody parameter specifies the body of the custom notification message that's sent to an external sender when a message contains malware. This parameter is required when the CustomNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomExternalSubject</maml:name>
      <maml:description>
        <maml:para>The CustomExternalSubject parameter specifies the subject of the custom notification message that's sent to an external sender when a message contains malware. This parameter is required when the CustomNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomFromAddress</maml:name>
      <maml:description>
        <maml:para>The CustomFromAddress parameter specifies the From address of the custom notification message that's sent to an internal or external sender when a message contains malware. This parameter is required when the CustomNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomFromName</maml:name>
      <maml:description>
        <maml:para>The CustomExternalFromName parameter specifies the From name of the custom notification message that's sent to internal or external senders when a message contains malware. This parameter is required when the CustomNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomInternalBody</maml:name>
      <maml:description>
        <maml:para>The CustomInternalBody parameter specifies the body of the custom notification message that's sent to an internal sender when a message contains malware. This parameter is required when the CustomNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomInternalSubject</maml:name>
      <maml:description>
        <maml:para>The CustomInternalSubject parameter specifies the subject of the custom notification message that's sent to an internal sender when a message contains malware. This parameter is required when the CustomNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomNotifications</maml:name>
      <maml:description>
        <maml:para>The CustomNotifications parameter enables or disables the custom notification message to the sender when the message contains malware. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>If you enable custom notification messages by setting this parameter to $true, you specify the details of the custom notification message using the CustomFromAddress,CustomFromName, CustomExternalSubject, CustomExternalBody, CustomInternalSubject, and CustomInternalBody parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableExternalSenderAdminNotifications</maml:name>
      <maml:description>
        <maml:para>The EnableExternalSenderAdminNotifications parameter enables or disables sending notification messages to an administrator when malware is detected in messages from external senders. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>Specify the administrator to receive the notification messages by using the ExternalSenderAdminAddress parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableExternalSenderNotifications</maml:name>
      <maml:description>
        <maml:para>The EnableExternalSenderNotifications parameter enables or disables sending notification messages to senders when malware is detected in messages from external senders. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableInternalSenderAdminNotifications</maml:name>
      <maml:description>
        <maml:para>The EnableExternalSenderAdminNotifications parameter enables or disables sending notification messages to an administrator when malware is detected in messages from internal senders. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>Specify the administrator to receive the notification messages by using the InternalSenderAdminAddress parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableInternalSenderNotifications</maml:name>
      <maml:description>
        <maml:para>The EnableExternalSenderAdminNotifications parameter enables or disables sending notification messages to senders when malware is detected in messages from internal senders. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalSenderAdminAddress</maml:name>
      <maml:description>
        <maml:para>The ExternalSenderAdminAddress parameter specifies the email address of the administrator who will receive notifications messages when messages from external senders contain malware. Notification messages are sent to the specified email address only if the EnableExternalSenderAdminNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalSenderAdminAddress</maml:name>
      <maml:description>
        <maml:para>The InternalSenderAdminAddress parameter specifies the email address of the administrator who will receive notifications messages when messages from external senders contain malware. Notification messages are sent to the specified email address only if the EnableInternalSenderAdminNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a new malware filter policy named Contoso Malware Filter Policy with the following settings:</maml:para>
        <maml:para />
        <maml:para>Block messages that contain malware.</maml:para>
        <maml:para>Don't notify the message sender when malware is detected in the message.</maml:para>
        <maml:para>Notify the administrator admin@contoso.com when malware is detected in a message from an internal sender.</maml:para>
        <maml:para>New-MalwareFilterPolicy -Name "Contoso Malware Filter Policy" -EnableInternalSenderAdminNotifications $true -InternalSenderAdminAddress admin@contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3f2cf682-e2c9-41e3-8f30-88f6cccf7c57(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>42fb2dce-2300-45c6-ac8f-d7647ecf6d2c
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-TransportService</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-TransportService cmdlet to set the transport configuration options for the Transport service on Mailbox servers or for Edge Transport servers.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>TransportService</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-TransportService</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveUserStatisticsLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveUserStatisticsLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveUserStatisticsLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveUserStatisticsLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AntispamAgentsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ContentConversionTracingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DelayNotificationTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeltaSyncClientCertificateThumbprint</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSAdapterEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSAdapterGuid</maml:name>
        <command:parameterValue required="True">Guid</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSProtocolOption</maml:name>
        <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalIPAddress</maml:name>
        <command:parameterValue required="True">IPAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlowControlLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlowControlLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlowControlLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlowControlLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlowControlLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogFilePath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpTransportSyncProxyServer</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSAdapterEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSAdapterGuid</maml:name>
        <command:parameterValue required="True">Guid</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSProtocolOption</maml:name>
        <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IntraOrgConnectorProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IntraOrgConnectorSmtpMaxMessagesPerConnection</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IrmLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IrmLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IrmLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IrmLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IrmLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxActiveTransportSyncJobsPerProcessor</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConcurrentMailboxDeliveries</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConcurrentMailboxSubmissions</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConnectionRatePerMinute</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxNumberOfTransportSyncAttempts</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxOutboundConnections</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxPerDomainOutboundConnections</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageExpirationTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRetryInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogSubjectLoggingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OutboundConnectionFailureRetryInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PickupDirectoryMaxHeaderSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PickupDirectoryMaxMessagesPerMinute</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PickupDirectoryMaxRecipientsPerMessage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PickupDirectoryPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipelineTracingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipelineTracingPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipelineTracingSenderAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PoisonMessageDetectionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PoisonThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProcessingSchedulerLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProcessingSchedulerLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProcessingSchedulerLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProcessingSchedulerLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProcessingSchedulerLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QueueLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QueueLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QueueLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QueueLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QueueMaxIdleTime</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientValidationCacheEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReplayDirectoryPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RootDropDirectoryPath</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RoutingTableLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RoutingTableLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RoutingTableLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServerStatisticsLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServerStatisticsLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServerStatisticsLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServerStatisticsLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmtpEnableAllTlsVersions</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransientFailureRetryCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransientFailureRetryInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportMaintenanceLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportMaintenanceLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportMaintenanceLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportMaintenanceLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportMaintenanceLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncAccountsPoisonAccountThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncAccountsPoisonDetectionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncAccountsPoisonItemThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncAccountsSuccessivePoisonItemThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncExchangeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncFacebookEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncHubHealthLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncHubHealthLogFilePath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncHubHealthLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncHubHealthLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncHubHealthLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncImapEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLinkedInEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogFilePath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Error | Information | Verbose | RawData | Debugging</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncMaxDownloadItemsPerConnection</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncMaxDownloadSizePerConnection</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncMaxDownloadSizePerItem</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncPopEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncRemoteConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UseDowngradedExchangeServerAuth</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WindowsLiveHotmailTransportSyncEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WlmLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WlmLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WlmLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WlmLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server that you want to modify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActiveUserStatisticsLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ActiveUserStatisticsLogMaxAge parameter specifies the maximum duration that the per user activity statistics log files are kept. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 10 days for this parameter, use 10.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of this parameter to 00:00:00 prevents the automatic removal of server statistics log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActiveUserStatisticsLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ActiveUserStatisticsLogMaxDirectorySize parameter specifies the cap on the size of the per user activity statistics log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The minimum value is 1 megabyte (MB). The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ActiveUserStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ActiveUserStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActiveUserStatisticsLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ActiveUserStatisticsLogMaxFileSize parameter specifies the maximum file size for the per user activity statistics log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ActiveUserStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ActiveUserStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActiveUserStatisticsLogPath</maml:name>
      <maml:description>
        <maml:para>The ActiveUserStatisticsLogPath parameter specifies the location of per user activity statistics log storage. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ActiveUsersStats. Setting the value of this parameter to $null disables server statistics logging.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogEnabled</maml:name>
      <maml:description>
        <maml:para>The AgentLogEnabled parameter specifies whether the agent log is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The AgentLogMaxAge parameter specifies the maximum age for the agent log file. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Setting the value of the AgentLogMaxAge parameter to 00:00:00 prevents the automatic removal of agent log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The AgentLogMaxDirectorySize parameter specifies the maximum size of all agent logs in the agent log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the AgentLogMaxFileSize parameter must be less than or equal to the value of the AgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The AgentLogMaxFileSize parameter specifies the maximum size of each agent log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the AgentLogMaxFileSize parameter must be less than or equal to the value of the AgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogPath</maml:name>
      <maml:description>
        <maml:para>The AgentLogPath parameter specifies the default agent log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\AgentLog. Setting the value of this parameter to $null disables agent logging. However, setting this parameter to $null when the value of the AgentLogEnabled attribute is $true generates event log errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AntispamAgentsEnabled</maml:name>
      <maml:description>
        <maml:para>The AntispamAgentsEnabled parameter specifies whether anti-spam agents are installed on the server specified with the Identity parameter. The default value is $false for the Transport service on Mailbox servers and $true on Edge Transport servers.</maml:para>
        <maml:para>You set this parameter by using a script. You shouldn't modify this parameter manually.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogEnabled</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogEnabled parameter specifies whether the connectivity log is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxAge parameter specifies the maximum age for the connectivity log file. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 25 days for this parameter, use 25.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the ConnectivityLogMaxAge parameter to 00:00:00 prevents the automatic removal of connectivity log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxDirectorySize parameter specifies the maximum size of all connectivity logs in the connectivity log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 1000 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxFileSize parameter specifies the maximum size of each connectivity log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogPath</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogPath parameter specifies the default connectivity log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\Connectivity. Setting the value of this parameter to $null disables connectivity logging. However, setting this parameter to $null when the value of the ConnectivityLogEnabled attribute is $true generates event log errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ContentConversionTracingEnabled</maml:name>
      <maml:description>
        <maml:para>The ContentConversionTracingEnabled parameter specifies whether content conversion tracing is enabled. Content conversion tracing captures content conversion failures that occur in the Transport service on a Mailbox server or on the Edge Transport server. The default value is $false. Content conversion tracing captures a maximum of 128 MB of content conversion failures. When the 128 MB limit is reached, no more content conversion failures are captured. Content conversion tracing captures the complete contents of email messages to the path specified by the PipelineTracingPath parameter. Make sure that you restrict access to this directory. The permissions required on the directory specified by the PipelineTracingPath parameter are as follows:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Administrators: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Network Service: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>System: Full Control</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DelayNotificationTimeout</maml:name>
      <maml:description>
        <maml:para>The DelayNotificationTimeout parameter specifies how long the server waits before it generates a delayed delivery status notification (DSN) message. The default value is 4 hours.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 3.5 hours for this parameter, use 03:30:00. The valid input range for this parameter is from 00:00:01 through 30.00:00:00. The value of the DelayNotificationTimeout parameter should always be greater than the value of the TransientFailureRetryCount parameter multiplied by the value of the TransientFailureRetryInterval parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeltaSyncClientCertificateThumbprint</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogEnabled</maml:name>
      <maml:description>
        <maml:para>The DnsLogEnabled parameter specifies whether the DNS log is enabled. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The DnsLogMaxAge parameter specifies the maximum age for the DNS log file. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Setting the value of the DnsLogMaxAge parameter to 00:00:00 prevents the automatic removal of DNS log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The DnsLogMaxDirectorySize parameter specifies the maximum size of all DNS logs in the DNS log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 100 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the DnsLogMaxFileSize parameter must be less than or equal to the value of the DnsLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the DNS log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The DnsLogMaxFileSize parameter specifies the maximum size of each DNS log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the DnsLogMaxFileSize parameter must be less than or equal to the value of the DnsLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the DNS log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogPath</maml:name>
      <maml:description>
        <maml:para>The DnsLogPath parameter specifies the DNS log directory location. The default value is blank ($null), which indicates no location is configured. If you enable DNS logging, you need to specify a local file path for the DNS log files by using this parameter. If the path contains spaces, enclose the entire path value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSAdapterEnabled</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSAdapterEnabled parameter specifies one or more Domain Name System (DNS) servers that Exchange uses for external DNS lookups. When the ExternalDNSAdapterEnabled parameter is set to $true, DNS lookups of destinations outside the Exchange organization are performed by using the DNS settings of the external network adapter specified by the value of the ExternalDNSAdapterGuid parameter. If you want to specify a custom list of DNS servers used for external Exchange DNS lookups only, you must specify the DNS servers by using the ExternalDNSServers parameter, and you must also set the value of the ExternalDNSAdapterEnabled parameter to $false. The default value of the ExternalDNSAdapterEnabled parameter is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSAdapterGuid</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSAdapterGuid parameter specifies the network adapter that has the DNS settings used for DNS lookups of destinations that exist outside the Exchange organization. The concept of an external network adapter and an internal network adapter is only applicable in a multi-homed Exchange server environment. When no particular network adapter is specified as the network adapter for external DNS lookups, the value of the ExternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000, and external DNS lookups are performed by using the DNS settings of any available network adapter. You may enter the GUID of a specific network adapter to use for external DNS lookups. The default value of the ExternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000.</maml:para>
        <maml:para>If the value of the ExternalDNSAdapterEnabled parameter is set to $false, the value of the ExternalDNSAdapterGuid parameter is ignored, and the list of DNS servers from the ExternalDNSServers parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Guid</command:parameterValue>
      <dev:type>
        <maml:name>Guid</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSProtocolOption</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSProtocolOption parameter specifies which protocol to use when querying external DNS servers. The valid options for this parameter are Any, UseTcpOnly, and UseUdpOnly. The default value is Any.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      <dev:type>
        <maml:name>Any | UseUdpOnly | UseTcpOnly</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSServers</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSServers parameter specifies the list of external DNS servers that the server queries when resolving a remote domain. DNS servers are specified by IP address. The default value is an empty list ({}).</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
        <maml:para>If the value of the ExternalDNSAdapterEnabled parameter is set to $true, the ExternalDNSServers parameter and its list of DNS servers isn't used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalIPAddress</maml:name>
      <maml:description>
        <maml:para>The ExternalIPAddress parameter specifies the IP address used in the Received message header field for every message that travels through the Edge Transport server or the Transport service on a Mailbox server. The IP address in the Received header field is used for hop count and routing loop detection. The IP address specified by the ExternalIPAddress parameter overrides the external network adapter's actual IP address. Typically, you would want to set the value of the ExternalIPAddress parameter to match the value of your domain's public MX record. The default value of the ExternalIPAddress parameter is blank. This means the actual IP address of the external network adapter is used in the Received header field.</maml:para>
      </maml:description>
      <command:parameterValue required="True">IPAddress</command:parameterValue>
      <dev:type>
        <maml:name>IPAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlowControlLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlowControlLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlowControlLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlowControlLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlowControlLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogFilePath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogLoggingLevel</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>None | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpTransportSyncProxyServer</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSAdapterEnabled</maml:name>
      <maml:description>
        <maml:para>The InternalDNSAdapterEnabled parameter specifies one or more DNS servers that Exchange uses for internal DNS lookups. When the InternalDNSAdapterEnabled parameter is set to $true, DNS lookups of destinations inside the Exchange organization are performed by using the DNS settings of the internal network adapter specified by the value of the InternalDNSAdapterGuid parameter. If you want to specify a custom list of DNS servers used for internal Exchange DNS lookups only, you must specify the DNS servers by using the InternalDNSServers parameter, and you must also set the value of the InternalDNSAdapterEnabled parameter to $false. The default value of the InternalDNSAdapterEnabled parameter is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSAdapterGuid</maml:name>
      <maml:description>
        <maml:para>The InternalDNSAdapterGuid parameter specifies the network adapter that has the DNS settings used for DNS lookups of servers that exist inside the Exchange organization. The concept of an internal network adapter and an external network adapter is only applicable in a multi-homed Exchange server environment. When no particular network adapter is specified as the network adapter for external DNS lookups, the value of the InternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000, and internal DNS lookups are performed by using the DNS settings of any available network adapter. You may enter the GUID of a specific network adapter to use for internal DNS lookups. The default value of the InternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000.</maml:para>
        <maml:para>If the value of the InternalDNSAdapterEnabled parameter is set to $false, the value of the InternalDNSAdapterGuid parameter is ignored, and the list of DNS servers from the InternalDNSServers parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Guid</command:parameterValue>
      <dev:type>
        <maml:name>Guid</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSProtocolOption</maml:name>
      <maml:description>
        <maml:para>The InternalDNSProtocolOption parameter specifies which protocol to use when you query internal DNS servers. Valid options for this parameter are Any, UseTcpOnly, or UseUdpOnly.The default value is Any.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      <dev:type>
        <maml:name>Any | UseUdpOnly | UseTcpOnly</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSServers</maml:name>
      <maml:description>
        <maml:para>The InternalDNSServers parameter specifies the list of DNS servers that should be used when resolving a domain name. DNS servers are specified by IP address. The default value is any empty list ({}).</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
        <maml:para>If the InternalDNSAdapterGuid parameter is set, and the value of the InternalDNSAdapterEnabled parameter is set to $true, the InternalDNSServers parameter and its list of DNS servers isn't used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IntraOrgConnectorProtocolLoggingLevel</maml:name>
      <maml:description>
        <maml:para>The IntraOrgConnectorProtocolLoggingLevel parameter enables or disables SMTP protocol logging on the implicit and invisible intra-organization Send connectors that are used to transmit messages between Exchange servers in the Exchange organization.</maml:para>
        <maml:para>Valid values for this parameter are None or Verbose. The value Verbose enables protocol logging for the connector. The value None disables protocol logging for the connector. The default value is None. When the IntraOrgConnectorProtocolLoggingLevel parameter is set to Verbose, the information is written to the Send connector protocol log specified by the SendProtocolLog parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>None | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IntraOrgConnectorSmtpMaxMessagesPerConnection</maml:name>
      <maml:description>
        <maml:para>The IntraOrgConnectorSmtpMaxMessagesPerConnection parameter specifies the maximum number of messages per connection limit on the implicit and invisible intra-organization Send connectors that are used to transmit messages between Exchange servers in the Exchange organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IrmLogEnabled</maml:name>
      <maml:description>
        <maml:para>The IrmLogEnabled parameter enables logging of Information Rights Management (IRM) transactions. IRM logging is enabled by default. Values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>$true Enable IRM logging</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>$false Disable IRM logging</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IrmLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The IrmLogMaxAge parameter specifies the maximum age for the IRM log file. Log files that are older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>The valid input range for this parameter is 00:00:00 to 24855.03:14:07. Setting the value of the IrmLogMaxAge parameter to 00:00:00 prevents the automatic removal of connectivity log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IrmLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This IrmLogMaxDirectorySize parameter specifies the maximum size of all IRM logs in the connectivity log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the IrmLogMaxFileSize parameter must be less than or equal to the value of the IrmLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the IRM log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IrmLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This IrmLogMaxFileSize parameter specifies the maximum size of each IRM log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the IrmLogMaxFileSize parameter must be less than or equal to the value of the IrmLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the IRM log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IrmLogPath</maml:name>
      <maml:description>
        <maml:para>The IrmLogPath parameter specifies the default IRM log directory location. The default location is %ExchangeInstallPath%Logging\IRMLogs. If you set the value of the IrmLogPath parameter to $null, you effectively disable IRM logging. However, if you set the value of the IrmLogPath parameter to $null when the value of the IrmLogEnabled attribute is $true, Exchange will log errors in the Application event log. The preferred way for disabling IRM logging is to set the IrmLogEnabled to $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxActiveTransportSyncJobsPerProcessor</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConcurrentMailboxDeliveries</maml:name>
      <maml:description>
        <maml:para>The MaxConcurrentMailboxDeliveries parameter specifies the maximum number of delivery threads that the transport service can have open at the same time to deliver messages to mailboxes. The default value is 20. The valid input range for this parameter is from 1 through 256. We recommend that you don't modify the default value unless Microsoft Customer Service and Support advises you to do this.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConcurrentMailboxSubmissions</maml:name>
      <maml:description>
        <maml:para>The MaxConcurrentMailboxSubmissions parameter specifies the maximum number of submission threads that the transport service can have open at the same time to send messages from mailboxes. The default value is 20. The valid input range for this parameter is from 1 through 256.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConnectionRatePerMinute</maml:name>
      <maml:description>
        <maml:para>The MaxConnectionRatePerMinute parameter specifies the maximum rate that connections are allowed to be opened with the transport service. If many connections are attempted with the transport service at the same time, the MaxConnectionRatePerMinute parameter limits the rate that the connections are opened so that the server's resources aren't overwhelmed. The default value is 1200 connections per minute. The valid input range for this parameter is from 1 through 2147483647.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxNumberOfTransportSyncAttempts</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxOutboundConnections</maml:name>
      <maml:description>
        <maml:para>The MaxOutboundConnections parameter specifies the maximum number of outbound connections that can be open at a time. The default value is 1000. The valid input range for this parameter is from 1 through 2147483647. If you enter a value of unlimited, no limit is imposed on the number of outbound connections. The value of the MaxOutboundConnections parameter must be greater than or equal to the value of the MaxPerDomainOutboundConnections parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxPerDomainOutboundConnections</maml:name>
      <maml:description>
        <maml:para>The MaxPerDomainOutboundConnections parameter specifies the maximum number of concurrent connections to any single domain. The default value is 20. The valid input range for this parameter is from 1 through 2147483647. If you enter a value of unlimited, no limit is imposed on the number of outbound connections per domain. The value of the MaxPerDomainOutboundConnections parameter must be less than or equal to the value of the MaxOutboundConnections parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageExpirationTimeout</maml:name>
      <maml:description>
        <maml:para>The MessageExpirationTimeout parameter specifies the maximum time that a particular message can remain in a queue. If a message remains in the queue for longer than this period of time, the message is returned to the sender as a permanent failure. The default value is 2 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 3 days for this parameter, use 3.00:00:00. The valid input range for this parameter is from 00:00:05 through 90.00:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageRetryInterval</maml:name>
      <maml:description>
        <maml:para>The MessageRetryInterval parameter specifies the retry interval for individual messages after a connection failure with a remote server. The default value is 1 minute.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 2 minutes for this parameter, use 00:02:00. The valid input range for this parameter is from 00:00:01 through 1.00:00:00. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogEnabled</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogEnabled parameter specifies whether message tracking is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogMaxAge parameter specifies the message tracking log maximum file age. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 20 days for this parameter, use 20.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the MessageTrackingLogMaxAge parameter to 00:00:00 prevents the automatic removal of message tracking log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogMaxDirectorySize parameter specifies the maximum size of the message tracking log directory. When the maximum directory size is reached, the server deletes the oldest log files first.</maml:para>
        <maml:para>The maximum size of the message tracking log directory is calculated as the total size of all log files that have the same name prefix. Other files that don't follow the name prefix convention aren't counted in the total directory size calculation. Renaming old log files or copying other files into the message tracking log directory could cause the directory to exceed its specified maximum size.</maml:para>
        <maml:para>For Mailbox servers, the maximum size of the message tracking log directory isn't the specified maximum size because the message tracking log files generated by the Transport service and the Mailbox Transport service have different name prefixes. Message tracking log files for the Transport service or for Edge Transport servers begin with the name prefix MSGTRK. Message tracking log files for the Mailbox Transport service begin with the name prefix MSGTRKM. For Mailbox servers, the maximum size of the message tracking log directory is two times the specified value.</maml:para>
        <maml:para>The default value is 1000 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the MessageTrackingLogMaxFileSize parameter must be less than or equal to the value of the MessageTrackingLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the message tracking log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogMaxFileSize parameter specifies the maximum size of the message tracking log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the MessageTrackingLogMaxFileSize parameter must be less than or equal to the value of the MessageTrackingLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 4294967296 bytes (4 GB). If you enter a value of unlimited, no size limit is imposed on the message tracking log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogPath</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogPath parameter specifies the location of the message tracking logs. The default location is %ExchangeInstallPath%TransportRoles\Logs\MessageTracking. Setting the value of this parameter to $null disables message tracking. However, setting this parameter to $null when the value of the MessageTrackingLogEnabled attribute is $true generates event log errors. The preferred method to disable message tracking is to use the MessageTrackingLogEnabled parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogSubjectLoggingEnabled</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogSubjectLoggingEnabled parameter specifies whether the message subject should be included in the message tracking log. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OutboundConnectionFailureRetryInterval</maml:name>
      <maml:description>
        <maml:para>The OutboundConnectionFailureRetryInterval parameter specifies the retry interval for subsequent connection attempts to a remote server where previous connection attempts have failed. The previously failed connection attempts are controlled by the TransientFailureRetryCount and TransientFailureRetryInterval parameters. For the Transport service on a Mailbox server, the default value of the OutboundConnectionFailureRetryInterval parameter is 10 minutes. On an Edge Transport server, the default value is 30 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 15 minutes for this parameter, use 00:15:00. The valid input range for this parameter is from 00:00:01 through 20.00:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PickupDirectoryMaxHeaderSize</maml:name>
      <maml:description>
        <maml:para>The PickupDirectoryMaxHeaderSize parameter specifies the maximum message header size that can be submitted to the Pickup directory. The default value is 64 KB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 32768 through 2147483647 bytes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PickupDirectoryMaxMessagesPerMinute</maml:name>
      <maml:description>
        <maml:para>The PickupDirectoryMaxMessagesPerMinute parameter specifies the maximum number of messages processed per minute by the Pickup directory and by the Replay directory. Each directory can independently process message files at the rate specified by the PickupDirectoryMaxMessagesPerMinute parameter. The default value is 100. The valid input range for this parameter is from 1 through 20000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PickupDirectoryMaxRecipientsPerMessage</maml:name>
      <maml:description>
        <maml:para>The PickupDirectoryMaxRecipientsPerMessage parameter specifies the maximum number of recipients that can be included on an email message. The default value is 100. The valid input range for this parameter is from 1 through 10000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PickupDirectoryPath</maml:name>
      <maml:description>
        <maml:para>The PickupDirectoryPath parameter specifies the location of the Pickup directory. The Pickup directory is used by administrators and third-party applications to create and submit messages. The default location is %ExchangeInstallPath%TransportRoles\Pickup. If the value of the PickupDirectoryPath parameter is set to $null, the Pickup directory is disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PipelineTracingEnabled</maml:name>
      <maml:description>
        <maml:para>The PipelineTracingEnabled parameter specifies whether to enable pipeline tracing. Pipeline tracing captures message snapshot files that record the changes made to the message by each transport agent configured in the transport service on the server. Pipeline tracing creates verbose log files that accumulate quickly. Pipeline tracing should only be enabled for a short time to provide in-depth diagnostic information that enables you to troubleshoot problems. In addition to troubleshooting, you can use pipeline tracing to validate changes that you make to the configuration of the transport service where you enable pipeline tracing. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PipelineTracingPath</maml:name>
      <maml:description>
        <maml:para>The PipelineTracingPath parameter specifies the location of the pipeline tracing logs. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\PipelineTracing. The path must be local to the Exchange computer. Setting the value of this parameter to $null disables pipeline tracing. However, setting this parameter to $null when the value of the PipelineTracingEnabled attribute is $true generates event log errors. The preferred method to disable pipeline tracing is to use the PipelineTracingEnabled parameter. Pipeline tracing captures the complete contents of email messages to the path specified by the PipelineTracingPath parameter. Make sure that you restrict access to this directory. The permissions required on the directory specified by the PipelineTracingPath parameter are as follows:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Administrators: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Network Service: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>System: Full Control</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PipelineTracingSenderAddress</maml:name>
      <maml:description>
        <maml:para>The PipelineTracingSenderAddress parameter specifies the sender email address that invokes pipeline tracing. Only messages from this address generate pipeline tracing output. The address can be either inside or outside the Exchange organization. Depending on your requirements, you may have to set this parameter to different sender addresses and send new messages to start the transport agents or routes that you want to test. The default value of this parameter is $null.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PoisonMessageDetectionEnabled</maml:name>
      <maml:description>
        <maml:para>The PoisonMessageDetectionEnabled parameter specifies whether poison messages should be detected. The default value is $true. Poison messages are messages determined to be potentially harmful to the Exchange system after a server failure. Poison messages are put in the poison message queue. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PoisonThreshold</maml:name>
      <maml:description>
        <maml:para>The PoisonThreshold parameter specifies the number of times a message can be rejected before it's classified as a poison message. The default value is 2. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this. The valid input range for this parameter is from 1 through 10.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProcessingSchedulerLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProcessingSchedulerLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProcessingSchedulerLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProcessingSchedulerLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProcessingSchedulerLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QueueLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The QueueLogMaxAge parameter specifies the maximum age of the queue log files. Log files that are older than the specified value are deleted. The default value is 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 10 days for this parameter, use 10.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the QueueLogMaxAge parameter to 00:00:00 prevents the automatic removal of queue log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QueueLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The QueueLogMaxDirectorySize parameter specifies the maximum size of the queue log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The default value is 200 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the QueueLogMaxFileSize parameter must be less than or equal to the value of the QueueLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the queue log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QueueLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The QueueLogMaxFileSize parameter specifies the maximum size of the queue log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the QueueLogMaxFileSize parameter must be less than or equal to the value of the QueueLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the queue log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QueueLogPath</maml:name>
      <maml:description>
        <maml:para>The QueueLogPath parameter specifies the path of the queue log directory. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\QueueViewer. Setting the value of this parameter to $null disables queue logging.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QueueMaxIdleTime</maml:name>
      <maml:description>
        <maml:para>The QueueMaxIdleTime parameter specifies the period of time an empty delivery queue can exist before the queue is removed. The default value is 3 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 5 minutes for this parameter, use 00:05:00. The valid input range for this parameter is from 00:00:05 through 01:00:00. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxAge parameter specifies the maximum age of the Receive connector protocol log file. Log files that are older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 20 days for this parameter, use 20.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the ReceiveProtocolLogMaxAge parameter to 00:00:00 prevents the automatic removal of Receive connector protocol log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxDirectorySize parameter specifies the maximum size of the Receive connector protocol log directory shared by all the Receive connectors that exist on the server. When the maximum directory size is reached, the server deletes the oldest log files first. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ReceiveProtocolLogMaxFileSize parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Receive connector protocol log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxFileSize parameter specifies the maximum size of the Receive connector protocol log files shared by all the Receive connectors that exist on the server. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ReceiveProtocolLogMaxFileSize parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Receive connector protocol log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogPath</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogPath parameter specifies the path of the protocol log directory for all the Receive connectors that exist on the server. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ProtocolLog\SmtpReceive. Setting the value of this parameter to $null disables protocol logging for all Receive connectors on the server. However, setting this parameter to $null when the value of the ProtocolLoggingLevel attribute for any Receive connector on the server is Verbose generates event log errors. The preferred method of disabling protocol logging is to use the Set-ReceiveConnector cmdlet to set the ProtocolLoggingLevel to None on each Receive connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientValidationCacheEnabled</maml:name>
      <maml:description>
        <maml:para>The RecipientValidationCacheEnabled parameter specifies whether the recipient addresses used by transport agents, such as the Recipient Filtering agent, are cached. The default value is $true on Edge Transport servers and $false for the Transport service on Mailbox servers.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReplayDirectoryPath</maml:name>
      <maml:description>
        <maml:para>The ReplayDirectoryPath parameter specifies the path of the Replay directory. The Replay directory is used to resubmit exported messages and to receive messages from foreign gateway servers. The default location is %ExchangeInstallPath%TransportRoles\Replay. If the value of the ReplayDirectoryPath parameter is set to $null, the Replay directory is disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RootDropDirectoryPath</maml:name>
      <maml:description>
        <maml:para>The RootDropDirectoryPath parameter specifies the top-level location of the Drop directory used by all Foreign connectors defined in the Transport service on a Mailbox server. The value of the RootDropDirectoryPath parameter may be a local path, or a Universal Naming Convention (UNC) path to a remote server. By default, the RootDropDirectoryPath parameter is blank. This indicates the value of RootDropDirectoryPath is the Exchange installation folder. The RootDropDirectoryPath parameter is used with the DropDirectory parameter in the Set-ForeignConnector cmdlet to specify the location for outgoing messages going to the address spaces defined on the Foreign connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RoutingTableLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The RoutingTableLogMaxAge parameter specifies the maximum routing table log age. Log files older than the specified value are deleted. The default value is 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 5 days for this parameter, use 5.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the RoutingTableLogMaxAge parameter to 00:00:00 prevents the automatic removal of routing table log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RoutingTableLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The RoutingTableLogMaxDirectorySize parameter specifies the maximum size of the routing table log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The default value is 50 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the routing table log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RoutingTableLogPath</maml:name>
      <maml:description>
        <maml:para>The RoutingTableLogPath parameter specifies the directory location where routing table log files should be stored. The default location is %ExchangeInstallPath%TransportRoles\Logs\Routing. Setting the value of the RoutingTableLogPath parameter to $null disables routing table logging.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxAge parameter specifies the Send connector protocol log file maximum age. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 25 days for this parameter, use 25.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the SendProtocolLogMaxAge parameter to 00:00:00 prevents the automatic removal of Send connector protocol log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxDirectorySize parameter specifies the maximum size of the Send connector protocol log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The minimum value is 1 MB. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the SendProtocolLogMaxFileSize parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Send connector protocol log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxFileSize parameter specifies the maximum size of the Send connector protocol log files shared by all the Send connectors that exist on a server. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the SendProtocolLogMaxFileSize parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Send connector protocol log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogPath</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogPath parameter specifies the location of protocol log storage for the Send connectors. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ProtocolLog\SmtpSend. Setting the value of this parameter to $null disables protocol logging for all Send connectors on the server. However, setting this parameter to $null when the value of the ProtocolLoggingLevel or IntraOrgConnectorProtocolLoggingLevel attribute for any Send connector on the server is Verbose generates event log errors. The preferred method of disabling protocol logging is to use the Set-SendConnector cmdlet to set the ProtocolLoggingLevel parameter to None on each Send connector and to set the IntraOrgConnectorProtocolLoggingLevel parameter to None.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ServerStatisticsLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ServerStatisticsLogMaxAge parameter specifies the maximum duration that the server statistics log files are kept. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 60 days for this parameter, use 60.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of this parameter to 00:00:00 prevents the automatic removal of server statistics log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ServerStatisticsLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ServerStatisticsLogMaxDirectorySize parameter specifies the cap on the size of the server statistics log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The minimum value is 1 MB. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ServerStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ServerStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ServerStatisticsLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ServerStatisticsLogMaxFileSize parameter specifies the maximum file size for the server statistics log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ServerStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ServerStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ServerStatisticsLogPath</maml:name>
      <maml:description>
        <maml:para>The ServerStatisticsLogPath parameter specifies the location of server statistics log storage. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ServerStats. Setting the value of this parameter to $null disables server statistics logging.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmtpEnableAllTlsVersions</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransientFailureRetryCount</maml:name>
      <maml:description>
        <maml:para>The TransientFailureRetryCount parameter specifies the maximum number of immediate connection retries attempted when the server encounters a connection failure with a remote server. The default value is 6. The valid input range for this parameter is from 0 through 15. When the value of this parameter is set to 0, the server doesn't immediately attempt to retry an unsuccessful connection, and the next connection attempt is controlled by the OutboundConnectionFailureRetryInterval parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransientFailureRetryInterval</maml:name>
      <maml:description>
        <maml:para>The TransientFailureRetryInterval parameter controls the connection interval between each connection attempt specified by the TransientFailureRetryCount parameter. For the Transport service on a Mailbox server, the default value of the TransientFailureRetryInterval parameter is 5 minutes. On an Edge Transport server, the default value is 10 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 8 minutes for this parameter, use 00:08:00. The valid input range for this parameter is from 00:00:01 through 12:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportMaintenanceLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportMaintenanceLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportMaintenanceLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportMaintenanceLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportMaintenanceLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncAccountsPoisonAccountThreshold</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncAccountsPoisonDetectionEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncAccountsPoisonItemThreshold</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncAccountsSuccessivePoisonItemThreshold</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncExchangeEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncFacebookEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncHubHealthLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncHubHealthLogFilePath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncHubHealthLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncHubHealthLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncHubHealthLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncImapEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLinkedInEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogFilePath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogLoggingLevel</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Error | Information | Verbose | RawData | Debugging</command:parameterValue>
      <dev:type>
        <maml:name>None | Error | Information | Verbose | RawData | Debugging</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncMaxDownloadItemsPerConnection</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncMaxDownloadSizePerConnection</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncMaxDownloadSizePerItem</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncPopEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncRemoteConnectionTimeout</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UseDowngradedExchangeServerAuth</maml:name>
      <maml:description>
        <maml:para>The UseDowngradedExchangeServerAuth parameter specifies whether the Generic Security Services application programming interface (GSSAPI) authentication method is used on connections where Transport Layer Security (TLS) is disabled.</maml:para>
        <maml:para>Normally, TLS is required for connections between the Transport services on Mailbox servers in your organization. On TLS secured connections, Kerberos authentication is used by default. However, there may be scenarios where you need to disable TLS between specific Transport services in your organization. When you do that, you need to set this parameter to $true to provide an alternative authentication method. The default value is $false. You shouldn't set this value to $true unless it's absolutely required.</maml:para>
        <maml:para>If you set this parameter to $true, you also need to create a specific Receive connector to service the non-TLS connections. This Receive connector must have remote IP address ranges specified to ensure that it's only used for non-TLS connections. You also must set the SuppressXAnonymousTls attribute of the Receive connector to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WindowsLiveHotmailTransportSyncEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WlmLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WlmLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WlmLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WlmLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the DelayNotificationTimeout parameter to 13 hours for the Transport service on a Mailbox server named Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Set-TransportService Mailbox01 -DelayNotificationTimeout 13:00:00</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the TransientFailureRetryCount parameter to 3 and sets the TransientFailureRetryInterval parameter to 30 seconds for the Transport service on a Mailbox server named Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Set-TransportService Mailbox01 -TransientFailureRetryCount 3 -TransientFailureRetryInterval 00:00:30</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the ReceiveProtocolLogPath parameter to C:\SMTP Protocol Logs\Receive.log for the Transport service on a Mailbox server named Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Set-TransportService Mailbox01 -ReceiveProtocolLogPath "C:\SMTP Protocol Logs\Receive.log"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport service" and "Edge Transport server" entries in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/42fb2dce-2300-45c6-ac8f-d7647ecf6d2c(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>4487f346-1e42-41d9-9fd1-c741cc54ea41
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-PolicyTipConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Remove-PolicyTipConfig cmdlet to remove custom data loss prevention (DLP) Policy Tips from your organization. You can't remove built-in Policy Tips.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>PolicyTipConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-PolicyTipConfig</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">PolicyTipConfigIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the custom Policy Tip you want to remove. You can use any value that uniquely identifies the custom Policy Tip. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>&lt;Locale&gt;\&lt;Action&gt;: Locale is a supported locale code. For example, en for English or fr for French. For more information about supported locales, see Supported languages for system messages. Action is one of the following Policy Tip actions: NotifyOnly, RejectOverride or Reject.</maml:para>
          <maml:para>The value Url</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">PolicyTipConfigIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>PolicyTipConfigIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the custom English Policy Tip for the action value NotifyOnly.</maml:para>
        <maml:para />
        <maml:para>Remove-PolicyTipConfig en\NotifyOnly</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes all the custom Russian Policy Tips.</maml:para>
        <maml:para />
        <maml:para>Get-PolicyTipConfig -Locale ru | Remove-PolicyTipConfig</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para />
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/4487f346-1e42-41d9-9fd1-c741cc54ea41(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>467ee0fb-b418-4b91-9115-2c96d97a1c55
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-TransportAgent</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-TransportAgent cmdlet to modify a transport agent.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>TransportAgent</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-TransportAgent</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">TransportAgentObjectId</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Priority</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportService</maml:name>
        <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the display name of the transport agent to be modified. The length of the name can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TransportAgentObjectId</command:parameterValue>
      <dev:type>
        <maml:name>TransportAgentObjectId</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Priority</maml:name>
      <maml:description>
        <maml:para>The Priority parameter specifies the priority of the transport agent. The priority of the transport agent controls the order in which the transport agents process email messages. The priority must be a value between 0 and the maximum number of transport agents. The default behavior is to append a new transport agent to the end of the priority list. Transport agents with a priority closest to 0 process email messages first.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportService</maml:name>
      <maml:description>
        <maml:para>The TransportService parameter specifies the transport service that you want to view or modify. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Hub for the Transport service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxSubmission for the Mailbox Transport Submission service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxDelivery for the Mailbox Transport Delivery service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FrontEnd for the Front End Transport service on Client Access servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Edge on Edge Transport servers.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      <dev:type>
        <maml:name>Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the priority of a fictitious agent named Test App in the Front End Transport service on a Client Access server.</maml:para>
        <maml:para />
        <maml:para>Set-TransportAgent "Test App" -Priority 3 -TransportService -FrontEnd</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport agents" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/467ee0fb-b418-4b91-9115-2c96d97a1c55(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>48929018-619f-4b7a-aecc-af284df14125
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Disable-TransportAgent</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Disable-TransportAgent cmdlet to disable a transport agent.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Disable</command:verb>
    <command:noun>TransportAgent</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Disable-TransportAgent</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">TransportAgentObjectId</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportService</maml:name>
        <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the display name of the transport agent to be disabled. The length of the name can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TransportAgentObjectId</command:parameterValue>
      <dev:type>
        <maml:name>TransportAgentObjectId</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportService</maml:name>
      <maml:description>
        <maml:para>The TransportService parameter specifies the transport service that you want to view or modify. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Hub for the Transport service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxSubmission for the Mailbox Transport Submission service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxDelivery for the Mailbox Transport Delivery service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FrontEnd for the Front End Transport service on Client Access servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Edge on Edge Transport servers.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      <dev:type>
        <maml:name>Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows how a fictitious application named Test App is disabled in the Transport service on a Mailbox server.</maml:para>
        <maml:para />
        <maml:para>Disable-TransportAgent "Test App" -TransportService Hub</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport agents" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/48929018-619f-4b7a-aecc-af284df14125(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>4d15128d-9e16-42a1-8ac5-36f07d4bbbf0
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-HostedContentFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the New-HostedContentFilterPolicy cmdlet to create content filter policies in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>HostedContentFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-HostedContentFilterPolicy</maml:name>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AddXHeaderValue</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdminDisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DownloadLink</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableEndUserSpamNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableLanguageBlockList</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableRegionBlockList</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationCustomFromAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationCustomFromName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationCustomSubject</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationFrequency</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationLanguage</maml:name>
        <command:parameterValue required="True">Default | English | French | German | Italian | Japanese | Spanish | Korean | Portuguese | Russian | ChineseSimplified | ChineseTraditional | Amharic | Arabic | Bulgarian | BengaliIndia | Catalan | Czech | Cyrillic | Danish | Greek | Estonian | Basque | Farsi | Finnish | Filipino | Galician | Gujarati | Hebrew | Hindi | Croatian | Hungarian | Indonesian | Icelandic | Kazakh | Kannada | Lithuanian | Latvian | Malayalam | Marathi | Malay | Dutch | NorwegianNynorsk | Norwegian | Oriya | Polish | PortuguesePortugal | Romanian | Slovak | Slovenian | SerbianCyrillic | Serbian | Swedish | Swahili | Tamil | Telugu | Thai | Turkish | Ukrainian | Urdu | Vietnamese</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationLimit</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FalsePositiveAdditionalRecipients</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HighConfidenceSpamAction</maml:name>
        <command:parameterValue required="True">MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncreaseScoreWithBizOrInfoUrls</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncreaseScoreWithImageLinks</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncreaseScoreWithNumericIps</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncreaseScoreWithRedirectToOtherPort</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LanguageBlockList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamBulkMail</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamEmbedTagsInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamEmptyMessages</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamFormTagsInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamFramesInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamFromAddressAuthFail</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamJavaScriptInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamNdrBackscatter</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamObjectTagsInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamSensitiveWordList</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamSpfRecordHardFail</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamWebBugsInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ModifySubjectValue</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QuarantineRetentionPeriod</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RedirectToRecipients</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RegionBlockList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SpamAction</maml:name>
        <command:parameterValue required="True">MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TestModeAction</maml:name>
        <command:parameterValue required="True">None | AddXHeader | BccMessage</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TestModeBccToRecipients</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the content filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddXHeaderValue</maml:name>
      <maml:description>
        <maml:para>The AddXHeaderValue parameter specifies the X-header value to add to spam messages when an action parameter is set to the value AddXHeader. The action parameters that use the value of AddXHeaderValue are HighConfidenceSpamAction, and SpamAction. Note that when the TestModeAction parameter is set to AddXHeader, the X-header value X-CustomSpam: This message was filtered by the custom spam filter option is added to the message.</maml:para>
        <maml:para>An X-header is a user-defined, unofficial header field that exists in the message header. X-headers aren't specifically mentioned in RFC 2822, but the use of an undefined header field starting with X- has become an accepted way to add unofficial header fields to a message. The value you specify must contain less than 256 characters, and it can't contain spaces.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdminDisplayName</maml:name>
      <maml:description>
        <maml:para>The AdminDisplayName parameter specifies a description for the content filter policy. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DownloadLink</maml:name>
      <maml:description>
        <maml:para>The DownloadLink parameter shows or hides a link in end-user spam notification messages to download the Junk E-mail Reporting Tool plugin for Microsoft Outlook. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>This parameter is only useful if the EnableEndUserSpamNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableEndUserSpamNotifications</maml:name>
      <maml:description>
        <maml:para>The EnableEndUserSpamNotification parameter enables for disables sending end-user spam quarantine notification messages. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>End-user spam notification messages periodically alert users when they have messages in the quarantine. When you enable end-user spam notifications, you may also specify values for the EndUserSpamNotificationCustomFromAddress, EndUserSpamNotificationCustomFromName, and EndUserSpamNotificationCustomSubject parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableLanguageBlockList</maml:name>
      <maml:description>
        <maml:para>The EnableLanguageBlockList parameter enables or disables blocking email messages that are written in specific languages, regardless of the message contents. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>When you enable the language block list, you may specify one or more languages by using the LanguageBlockList parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableRegionBlockList</maml:name>
      <maml:description>
        <maml:para>The EnableRegionBlockList parameter enables or disables blocking email messages that are sent from specific countries or regions, regardless of the message contents. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>When you enable the region block list, you may specify one or more regions by using the RegionBlockList parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationCustomFromAddress</maml:name>
      <maml:description>
        <maml:para>The EndUserSpamNotificationCustomFromAddress parameter specifies a custom From address for end-user spam notification messages. Valid input for this parameter is an SMTP email address.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationCustomFromName</maml:name>
      <maml:description>
        <maml:para>The EndUserSpamNotificationCustomFromName parameter specifies a custom display name in the From field for end-user spam notification messages. If the value includes spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationCustomSubject</maml:name>
      <maml:description>
        <maml:para>The EndUserSpamNotificationCustomSubject parameter specifies a custom subject for end-user spam notification messages. If the value includes spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationFrequency</maml:name>
      <maml:description>
        <maml:para>The EndUserSpamNotificationFrequency parameter specifies the repeat interval in days that end-user spam notification messages are sent. Valid input for this parameter is an integer between 1 and 15. The default value is 3.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationLanguage</maml:name>
      <maml:description>
        <maml:para>The EndUserSpamNotificationLanguage parameter specifies the language of end-user spam notification messages. The default value is Default. This means the default language of end-user spam notification messages is the default language of the cloud-based organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Default | English | French | German | Italian | Japanese | Spanish | Korean | Portuguese | Russian | ChineseSimplified | ChineseTraditional | Amharic | Arabic | Bulgarian | BengaliIndia | Catalan | Czech | Cyrillic | Danish | Greek | Estonian | Basque | Farsi | Finnish | Filipino | Galician | Gujarati | Hebrew | Hindi | Croatian | Hungarian | Indonesian | Icelandic | Kazakh | Kannada | Lithuanian | Latvian | Malayalam | Marathi | Malay | Dutch | NorwegianNynorsk | Norwegian | Oriya | Polish | PortuguesePortugal | Romanian | Slovak | Slovenian | SerbianCyrillic | Serbian | Swedish | Swahili | Tamil | Telugu | Thai | Turkish | Ukrainian | Urdu | Vietnamese</command:parameterValue>
      <dev:type>
        <maml:name>Default | English | French | German | Italian | Japanese | Spanish | Korean | Portuguese | Russian | ChineseSimplified | ChineseTraditional | Amharic | Arabic | Bulgarian | BengaliIndia | Catalan | Czech | Cyrillic | Danish | Greek | Estonian | Basque | Farsi | Finnish | Filipino | Galician | Gujarati | Hebrew | Hindi | Croatian | Hungarian | Indonesian | Icelandic | Kazakh | Kannada | Lithuanian | Latvian | Malayalam | Marathi | Malay | Dutch | NorwegianNynorsk | Norwegian | Oriya | Polish | PortuguesePortugal | Romanian | Slovak | Slovenian | SerbianCyrillic | Serbian | Swedish | Swahili | Tamil | Telugu | Thai | Turkish | Ukrainian | Urdu | Vietnamese</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationLimit</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FalsePositiveAdditionalRecipients</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HighConfidenceSpamAction</maml:name>
      <maml:description>
        <maml:para>The HighConfidenceSpamAction parameter specifies the action to take when a message is very likely to be spam. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AddXHeader: The value specified by the AddXHeaderValue parameter is added to the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Delete</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ModifySubject: The value specified by the ModifySubjectValue parameter is prepended to the subject of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MoveToJmf: Move the message to the user's Junk E-mail Folder.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Quarantine: Move the message to the quarantine.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Redirect: Redirect the message to the recipients specified by the RedirectToRecipients parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is Quarantine.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</command:parameterValue>
      <dev:type>
        <maml:name>MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncreaseScoreWithBizOrInfoUrls</maml:name>
      <maml:description>
        <maml:para>The IncreaseScoreWithBizOrInfoUrls parameter increases the spam score of messages that contain links to .biz or .info domains. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncreaseScoreWithImageLinks</maml:name>
      <maml:description>
        <maml:para>The IncreaseScoreWithImageLinks parameter increases the spam score of messages that contain image links to remote websites. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncreaseScoreWithNumericIps</maml:name>
      <maml:description>
        <maml:para>The IncreaseScoreWithNumericIps parameter increases the spam score of messages that contain links to IP addresses. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncreaseScoreWithRedirectToOtherPort</maml:name>
      <maml:description>
        <maml:para>The IncreaseScoreWithRedirectToOtherPort parameter increases the spam score of messages that contain links that redirect to other TCP ports. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LanguageBlockList</maml:name>
      <maml:description>
        <maml:para>The LanguageBlockList parameter specifies the languages to block when messages are blocked based on their language. Valid input for this parameter is a supported ISO 639-1 lowercase two-letter language code. You can specify multiple values separated by commas. This parameter is only use when the EnableRegionBlockList parameter is set to $true.</maml:para>
        <maml:para>A reference for two-letter language codes is available at the Library of Congress website: ISO 639-2 Code (http://www.loc.gov/standards/iso639-2/php/code_list.php). Note that not all possible language codes are available as input for this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamBulkMail</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamBulkMail parameter classifies the message as spam when the message is identified as a bulk email message. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamEmbedTagsInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamEmbedTagsInHtml parameter classifies the message as spam when the message contains HTML &lt;embed&gt; tags. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamEmptyMessages</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamEmptyMessages parameter classifies the message as spam when the message is empty. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamFormTagsInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamFormTagsInHtml parameter classifies the message as spam when the message contains HTML &lt;form&gt; tags. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamFramesInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamFramesInHtml parameter classifies the message as spam when the message contains HTML &lt;frame&gt; or &lt;iframe&gt; tags. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamFromAddressAuthFail</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamFromAddressAuthFail parameter classifies the message as spam when Sender ID filtering encounters a hard fail. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamJavaScriptInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamJavaScriptInHtml parameter classifies the message as spam when the message contains JavaScript or VBScript. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamNdrBackscatter</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamNdrBackscatter parameter classifies the message as spam when the message is a non-delivery report (NDR) to a forged sender. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamObjectTagsInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamObjectTagsInHtml parameter classifies the message as spam when the message contains HTML &lt;object&gt; tags. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamSensitiveWordList</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamSensitiveWordList parameter classifies the message as spam when the message contains words from the sensitive words list. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamSpfRecordHardFail</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamFromAddressAuthFail parameter classifies the message as spam when Sender Policy Framework (SPF) record checking encounters a hard fail. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamWebBugsInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamWebBugsInHtml parameter classifies the message as spam when the message contains web bugs. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ModifySubjectValue</maml:name>
      <maml:description>
        <maml:para>The ModifySubjectValue parameter specifies the text to prepend to the existing subject of spam messages when an action parameter is set to the value ModifySubject. The action parameters that use the value of ModifySubjectValue are HighConfidenceSpamAction and SpamAction.</maml:para>
        <maml:para>The value you specify must contain less than 256 characters If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QuarantineRetentionPeriod</maml:name>
      <maml:description>
        <maml:para>The QuarantineRetentionPeriod parameter specifies the length of time in days that spam messages remain in the quarantine. Valid input for this parameter is an integer between 1 and 15. The default value is 15.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RedirectToRecipients</maml:name>
      <maml:description>
        <maml:para>The RedirectToRecipients parameter specifies the replacement recipients in spam messages when an action parameter is set to the value Redirect. The action parameters that use the value of RedirectToRecipients are HighConfidenceSpamAction and SpamAction.</maml:para>
        <maml:para>Valid input for this parameter is an email address. Separate multiple email addresses with commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RegionBlockList</maml:name>
      <maml:description>
        <maml:para>The RegionBlockList parameter specifies the region to block when messages are blocked based on their source region. Valid input for this parameter is a supported ISO 3166-1 uppercase two-letter country code. You can specify multiple values separated by commas. This parameter is only used when the EnableRegionBlockList parameter is set to $true.</maml:para>
        <maml:para>A reference for two-letter country codes is available at the International Organization for Standardization (ISO) website: ISO 3166-1 decoding table (http://www.iso.org/iso/country_codes/iso-3166-1_decoding_table.htm). Note that not all possible country codes are available as input for this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SpamAction</maml:name>
      <maml:description>
        <maml:para>The SpamAction parameter specifies the action to take on messages that may be spam. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AddXHeader: The value specified by the AddXHeaderValue parameter is added to the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Delete</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ModifySubject: The value specified by the ModifySubjectValue parameter is prepended to the subject of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MoveToJmf: Move the message to the user's Junk E-mail Folder.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Quarantine</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Redirect: Redirect the message to the recipients specified by the RedirectToRecipients parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is Quarantine.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</command:parameterValue>
      <dev:type>
        <maml:name>MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TestModeAction</maml:name>
      <maml:description>
        <maml:para>The TestModeAction parameter specifies the additional action to take on messages that match any of the IncreaseScoreWith or MarkAsSpam parameters that are set to the value Test. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AddXHeader: The X-header value X-CustomSpam: This message was filtered by the custom spam filter option is added to the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>BccMessage: Redirect the message to the recipients specified by the TestModeBccToRecipients parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is None.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | AddXHeader | BccMessage</command:parameterValue>
      <dev:type>
        <maml:name>None | AddXHeader | BccMessage</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TestModeBccToRecipients</maml:name>
      <maml:description>
        <maml:para>The TestModeBccToRecipients parameter specifies the blind carbon copy recipients to add to spam messages when the TestModeAction action parameter is set to the value BccMessage.</maml:para>
        <maml:para>Valid input for this parameter is an email address. Separate multiple email addresses with commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a content filter policy named Contoso Content Filter Policy with the following settings:</maml:para>
        <maml:para />
        <maml:para>Redirect messages that are definitely spam or that may be spam to chris@contoso.com.</maml:para>
        <maml:para>Send copies of spam quarantine false positive submissions to michelle@contoso.com.</maml:para>
        <maml:para>New-HostedContentFilterPolicy -Name "Contoso Content Filter Policy" -HighConfidenceSpamAction Redirect -SpamAction Redirect -RedirectToRecipients chris@contoso.com -FalsePositiveAdditionalRecipients michelle@contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/4d15128d-9e16-42a1-8ac5-36f07d4bbbf0(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>4f40a5fc-3275-42a0-b12f-a199bd42c8d5
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-PerimeterConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-PerimeterConfig cmdlet to modify the list of gateway server IP addresses that have been added to the cloud-based safelists.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>PerimeterConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-PerimeterConfig</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EheDecryptEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EheEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EhfAdminAccountSyncEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EhfConfigSyncEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GatewayIPAddresses</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalServerIPAddresses</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IPSafelistingSyncEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IPSkiplistingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailFlowPartner</maml:name>
        <command:parameterValue required="True">MailFlowPartnerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MigrationInProgress</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PartnerConnectorDomain</maml:name>
        <command:parameterValue required="True">SmtpDomain</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PartnerRoutingDomain</maml:name>
        <command:parameterValue required="True">SmtpDomain</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PerimeterOrgId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RMSOFwdSyncEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RouteOutboundViaEhfEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RouteOutboundViaFfoFrontendEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SafelistingUIMode</maml:name>
        <command:parameterValue required="True">None | Smp | Ecp | EhfAC</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SyncToHotmailEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EheDecryptEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EheEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EhfAdminAccountSyncEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EhfConfigSyncEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GatewayIPAddresses</maml:name>
      <maml:description>
        <maml:para>Use the GatewayIPAddresses parameter to create or modify a list of gateway server IP addresses to add to IP safelists. IP addresses are specified in IPv4 format, for example, 10.1.1.1. If you list more than one IP address, separate each entry with a comma.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalServerIPAddresses</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IPSafelistingSyncEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IPSkiplistingEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailFlowPartner</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailFlowPartnerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailFlowPartnerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MigrationInProgress</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PartnerConnectorDomain</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpDomain</command:parameterValue>
      <dev:type>
        <maml:name>SmtpDomain</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PartnerRoutingDomain</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpDomain</command:parameterValue>
      <dev:type>
        <maml:name>SmtpDomain</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PerimeterOrgId</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RMSOFwdSyncEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RouteOutboundViaEhfEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RouteOutboundViaFfoFrontendEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SafelistingUIMode</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Smp | Ecp | EhfAC</command:parameterValue>
      <dev:type>
        <maml:name>None | Smp | Ecp | EhfAC</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SyncToHotmailEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows how to add an IP address to cloud-based safelists where the gateway server relays email to the cloud-based service from internal email servers only.</maml:para>
        <maml:para />
        <maml:para>Set-PerimeterConfig -GatewayIPAddresses 123.0.0.1</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>If you have an on-premises messaging system, you can add the IP addresses of your gateway servers to cloud-based safelists. Safelists are also known as whitelists. You add IP addresses to cloud-based safelists to make sure that e-mail that originates in your on-premises messaging system isn't treated as spam.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/4f40a5fc-3275-42a0-b12f-a199bd42c8d5(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>520bfa38-f51a-400c-9ff3-46fa50222092
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Install-TransportAgent</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Install-TransportAgent cmdlet to register a transport agent in the Transport service on a Mailbox server, in the Front End Transport service on a Client Access server, or on an Edge Transport server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Install</command:verb>
    <command:noun>TransportAgent</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Install-TransportAgent</maml:name>
      <command:parameter required="True">
        <maml:name>AssemblyPath</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>TransportAgentFactory</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportService</maml:name>
        <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AssemblyPath</maml:name>
      <maml:description>
        <maml:para>The AssemblyPath parameter specifies the location of the transport agent Microsoft .NET assembly. Universal Naming Convention (UNC) file paths can't be used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the display name of the transport agent to be installed. The length of the name can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportAgentFactory</maml:name>
      <maml:description>
        <maml:para>The TransportAgentFactory parameter specifies the Microsoft .NET class type of the transport agent factory. The developer of the transport agent being installed provides the transport agent factory and related information. For more information, see the documentation provided by the developer of the transport agent.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportService</maml:name>
      <maml:description>
        <maml:para>The TransportService parameter specifies the transport service that you want to view or modify. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Hub for the Transport service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxSubmission for the Mailbox Transport Submission service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxDelivery for the Mailbox Transport Delivery service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FrontEnd for the Front End Transport service on Client Access servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Edge on Edge Transport servers.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      <dev:type>
        <maml:name>Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows how a fictitious application named Test App is installed in the Transport service on a Mailbox server.</maml:para>
        <maml:para />
        <maml:para>Install-TransportAgent -Name "Test App" -TransportAgentFactory "vendor.exchange.avTransportAgentfactory" -AssemblyPath "c:\Program Files\Vendor\TransportAgent\AvTransportAgentFactory.dll" -TransportService Hub</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Transport agents have full access to all email messages that they encounter. Exchange puts no restrictions on a transport agent's behavior. Transport agents that are unstable or contain security flaws may affect the stability and security of Exchange. Therefore, you must only install transport agents that you fully trust and that have been fully tested in a test environment.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport agents" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/520bfa38-f51a-400c-9ff3-46fa50222092(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>52d1ecdd-56fc-456a-8de7-4b31521ce2a5
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-MalwareFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-MalwareFilterPolicy cmdlet to modify malware filter policies in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>MalwareFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-MalwareFilterPolicy</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MalwareFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Action</maml:name>
        <command:parameterValue required="True">DeleteMessage | DeleteAttachmentAndUseDefaultAlertText | DeleteAttachmentAndUseCustomAlertText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdminDisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassInboundMessages</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassOutboundMessages</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomAlertText</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomExternalBody</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomExternalSubject</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomFromAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomFromName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomInternalBody</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomInternalSubject</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableExternalSenderAdminNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableExternalSenderNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableInternalSenderAdminNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableInternalSenderNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalSenderAdminAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalSenderAdminAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MakeDefault</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the malware filter policy you want to modify. You can use any value that uniquely identifies the policy. For example, you can use the name, GUID or distinguished name (DN) of the malware filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MalwareFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MalwareFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Action</maml:name>
      <maml:description>
        <maml:para>The Action parameter specifies the action to take when malware is detected in a message. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DeleteMessage: deletes the message when malware is detected.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReplaceWithDefaultAlert: delivers the message, but replaces the message contents with the default alert text when malware is detected.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReplaceWithCustomAlert: delivers the message, but replaces the message contents with the custom alert text specified by the AlertText parameter when malware is detected.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is DeleteMessage.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DeleteMessage | DeleteAttachmentAndUseDefaultAlertText | DeleteAttachmentAndUseCustomAlertText</command:parameterValue>
      <dev:type>
        <maml:name>DeleteMessage | DeleteAttachmentAndUseDefaultAlertText | DeleteAttachmentAndUseCustomAlertText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdminDisplayName</maml:name>
      <maml:description>
        <maml:para>The AdminDisplayName parameter specifies a description for the malware filter policy. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BypassInboundMessages</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The BypassInboundMessages parameter skips or enforces malware scanning on incoming messages. Valid input for this parameter is $true or $false. The default value is $false. This means malware scanning occurs on incoming messages by default.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BypassOutboundMessages</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The BypassOutboundMessages parameter skips or enforces malware scanning on outgoing messages. Valid input for this parameter is $true or $false. The default value is $false. This means malware scanning occurs on outgoing messages by default.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomAlertText</maml:name>
      <maml:description>
        <maml:para>The CustomAlertText parameter specifies the custom alert text to insert in the message when malware is detected and the value of the Action parameter is set to ReplaceWithCustomAlert. This parameter is required when the CustomNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomExternalBody</maml:name>
      <maml:description>
        <maml:para>The CustomExternalBody parameter specifies the body of the custom notification message that's sent to an external sender when a message contains malware. This parameter is required when any of the following parameters are set to $true:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>CustomNotifications</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>EnableExternalSenderAdminNotifications</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>EnableExternalSenderNotifications</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomExternalSubject</maml:name>
      <maml:description>
        <maml:para>The CustomExternalSubject parameter specifies the subject of the custom notification message that's sent to an external sender when a message contains malware. This parameter is required when any of the following parameters are set to $true:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>CustomNotifications</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>EnableExternalSenderAdminNotifications</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>EnableExternalSenderNotifications</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomFromAddress</maml:name>
      <maml:description>
        <maml:para>The CustomFromAddress parameter specifies the From address of the custom notification message that's sent to an internal or external sender when a message contains malware. This parameter is required when the CustomNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomFromName</maml:name>
      <maml:description>
        <maml:para>The CustomFromName parameter specifies the From name of the custom notification message that's sent to internal or external senders when a message contains malware. This parameter is required when the CustomNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomInternalBody</maml:name>
      <maml:description>
        <maml:para>The CustomInternalBody parameter specifies the body of the custom notification message that's sent to an internal sender when a message contains malware. This parameter is required when any of the following parameters are set to $true:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>CustomNotifications</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>EnableExternalSenderAdminNotifications</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>EnableExternalSenderNotifications</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomInternalSubject</maml:name>
      <maml:description>
        <maml:para>The CustomInternalSubject parameter specifies the subject of the custom notification message that's sent to an internal sender when a message contains malware. This parameter is required when any of the following parameters are set to $true:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>CustomNotifications</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>EnableExternalSenderAdminNotifications</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>EnableExternalSenderNotifications</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomNotifications</maml:name>
      <maml:description>
        <maml:para>The CustomNotifications parameter enables or disables the custom notification message to the sender when the message contains malware. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>If you enable custom notification messages by setting this parameter to $true, you specify the details of the custom notification message using the CustomFromAddress,CustomFromName, CustomExternalSubject, CustomExternalBody, CustomInternalSubject, and CustomInternalBody parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableExternalSenderAdminNotifications</maml:name>
      <maml:description>
        <maml:para>The EnableExternalSenderAdminNotifications parameter enables or disables sending notification messages to an administrator when malware is detected in messages from external senders. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>Specify the administrator to receive the notification messages by using the ExternalSenderAdminAddress parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableExternalSenderNotifications</maml:name>
      <maml:description>
        <maml:para>The EnableExternalSenderNotifications parameter enables or disables sending notification messages to senders when malware is detected in messages from external senders. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableInternalSenderAdminNotifications</maml:name>
      <maml:description>
        <maml:para>The EnableExternalSenderAdminNotifications parameter enables or disables sending notification messages to an administrator when malware is detected in messages from internal senders. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>Specify the administrator to receive the notification messages by using the InternalSenderAdminAddress parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableInternalSenderNotifications</maml:name>
      <maml:description>
        <maml:para>The EnableExternalSenderAdminNotifications parameter enables or disables sending notification messages to senders when malware is detected in messages from internal senders. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalSenderAdminAddress</maml:name>
      <maml:description>
        <maml:para>The ExternalSenderAdminAddress parameter specifies the email address of the administrator who will receive notifications messages when messages from external senders contain malware. Notification messages are sent to the specified email address only if the EnableExternalSenderAdminNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalSenderAdminAddress</maml:name>
      <maml:description>
        <maml:para>The InternalSenderAdminAddress parameter specifies the email address of the administrator who will receive notifications messages when messages from external senders contain malware. Notification messages are sent to the specified email address only if the EnableInternalSenderAdminNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MakeDefault</maml:name>
      <maml:description>
        <maml:para>The MakeDefault switch makes this the default malware filter policy. You don't have to specify a value with this switch.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the malware filter policy named Contoso Malware Filter Policy with the following settings:</maml:para>
        <maml:para />
        <maml:para>Delete messages that contain malware.</maml:para>
        <maml:para>Don't notify the message sender when malware is detected in the message.</maml:para>
        <maml:para>Notify the administrator admin@contoso.com when malware is detected in a message from an internal sender.</maml:para>
        <maml:para>Set-MalwareFilterPolicy -Identity "Contoso Malware Filter Policy" -Action DeleteMessage -EnableInternalSenderAdminNotifications $true -InternalSenderAdminAddress admin@contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/52d1ecdd-56fc-456a-8de7-4b31521ce2a5(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>53b76641-d341-42a8-b281-018a91af6a36
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-SystemMessage</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-SystemMessage cmdlet to modify existing customized delivery status notification (DSN) or quota messages.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>SystemMessage</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-SystemMessage</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">SystemMessageIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Original</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Text</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>TheIdentity parameter specifies the identity of the DSN or quota message to modify.</maml:para>
        <maml:para>To modify a DSN message, use the following format: language\internal | external\system code. For more information about the syntax of the DSN message identity, see DSN message identity.</maml:para>
        <maml:para>To modify a customized quota message, use the following format: language\QuotaMessageType. Language is expressed as the two-character locale code. The QuotaMessageType parameter accepts the following values:</maml:para>
        <maml:para>Quota message types related to mailbox size:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitSendReceiveMailBox Issued when a mailbox exceeds its ProhibitSendReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProhibitSendMailbox Issued when a mailbox exceeds its ProhibitSendQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailbox Issued when a mailbox that has a ProhibitSendQuota limit or a ProhibitSendReceiveQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxUnlimitedSize Issued when a mailbox that doesn't have a ProhibitSendQuota limit or a ProhibitSendReceiveQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to public folder size:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitPostPublicFolder Issued when a public folder exceeds its ProhibitPostQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningPublicFolder Issued when a public folder that has a ProhibitPostQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningPublicFolderUnlimitedSize Issued when a public folder that doesn't have a ProhibitPostQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of messages allowed in a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveMailboxMessagesPerFolderCount Issued when a mailbox exceeds its MailboxMessagesPerFolderCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxMessagesPerFolderCount Issued when a mailbox that has a MailboxMessagesPerFolderCountReceiveQuota limit configured exceeds its MailboxMessagesPerFolderCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxMessagesPerFolderUnlimitedCount Issued when a mailbox that doesn't have a MailboxMessagesPerFolderCountReceiveQuota limit configured exceeds its MailboxMessagesPerFolderCountWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of subfolders that can be created in a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveFolderHierarchyChildrenCountCount Issued when a mailbox exceeds its FolderHierarchyChildrenCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyChildrenCount Issued when a mailbox that has a FolderHierarchyChildrenCountReceiveQuota limit configured exceeds its FolderHierarchyChildrenCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyChildrenUnlimitedCount Issued when a mailbox that doesn't have a FolderHierarchyChildrenCountReceiveQuota limit configured exceeds its FolderHierarchyChildrenCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFoldersCount Issued when the number of folders in the hierarchy exceeds the FoldersCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProhibitReceiveFoldersCount Issued when new public folder creation fails because the public folder hierarchy is too big and has reached the FoldersCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFoldersCountUnlimited Issued when the public folder hierarchy is getting too big and does not have the FoldersCountReceiveQuota limit configured.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of levels allowed in the folder hierarchy of a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveFolderHierarchyDepth Issued when a mailbox exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyDepth Issued when a mailbox that has a FolderHierarchyDepthReceiveQuota limit configured exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyDepthUnlimited Issued when a mailbox that doesn't have a FolderHierarchyDepthReceiveQuota limit configured exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">SystemMessageIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>SystemMessageIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a name that you can use to describe the DSN or quota message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Original</maml:name>
      <maml:description>
        <maml:para>The Original parameter reverts the DSN or quota message text back to the original shipped text. This parameter is useful when you don't want to remove the customized DSN or quota entry but want to revert to the original text.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Text</maml:name>
      <maml:description>
        <maml:para>The Text parameter specifies the text of the message displayed to senders or mailbox owners. The text should explain why the message was created and what actions the sender or mailbox owner should take, if any.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the English text of an existing customized DSN message that has the DSN code 5.3.5.</maml:para>
        <maml:para />
        <maml:para>Set-SystemMessage En\Internal\5.3.5 -Text "The recipient e-mail system can't process this e-mail message. Please contact your system administrator for more information."</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the English text of an existing customized WarningMailbox quota message.</maml:para>
        <maml:para />
        <maml:para>Set-SystemMessage En\WarningMailbox -Text "Your mailbox has exceeded the warning limit specified by your e-mail administrator. Please reduce the size of your mailbox."</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>DSN messages are issued to the sender of e-mail messages that haven't reached their intended recipients. Quota messages are issued to users whose mailboxes or public folders have reached the specific warning, prohibit send, or prohibit receive quotas. Customized DSN and quota messages replace the built-in DSN or quota messages included with Exchange.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "DSNs" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/53b76641-d341-42a8-b281-018a91af6a36(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>54154f8c-3567-4d81-abc0-235f35f7ada8
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-MalwareFilteringServer</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-MalwareFilteringServer cmdlet to configure the Malware agent settings in the Transport service on a Mailbox server.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>MalwareFilteringServer</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-MalwareFilteringServer</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MalwareFilteringServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassFiltering</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeferAttempts</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeferWaitTime</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForceRescan</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MinimumSuccessfulEngineScans</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PrimaryUpdatePath</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ScanErrorAction</maml:name>
        <command:parameterValue required="True">Block | Allow</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ScanTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SecondaryUpdatePath</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UpdateFrequency</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UpdateTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server where you want to configure the anti-malware settings. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MalwareFilteringServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MalwareFilteringServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BypassFiltering</maml:name>
      <maml:description>
        <maml:para>The BypassFiltering parameter temporarily bypasses malware filtering without disabling the Malware agent on the server. The Malware agent is still active, and the agent is still called for every message, but no malware filtering is actually performed. This allows you to temporarily disable and then enable malware filtering on the server without disrupting mail flow by restarting the Microsoft Exchange Transport service. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeferAttempts</maml:name>
      <maml:description>
        <maml:para>The DeferAttempts parameter specifies the maximum number of times to defer a message that can't be scanned by the Malware agent. Valid input for this parameter is an integer between 1 and 5. The default value is 3.</maml:para>
        <maml:para>After the maximum number of deferrals is reached, the action taken by the Malware agent depends on the error. For scan timeouts and engine errors, the action is to fail the message and return a non-delivery report (NDR) to the sender immediately after the last defer attempt. For all other errors, the message is retried for up to 48 hours, with each retry attempt taking place one hour longer than the last one. For example, starting after the last defer attempt, the first retry attempt will occur in 1 hour, the next retry attempt will occur 2 hours after that, the next retry attempt will occur 3 hours after the second retry attempt, and so on for up to 48 hours. After 48 hours have elapsed, the action is to fail the message and return a non-delivery report (NDR) to the sender.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeferWaitTime</maml:name>
      <maml:description>
        <maml:para>The DeferWaitTime parameter specifies the time period in minutes to increase the interval to resubmit messages for malware filtering in an effort to reduce the workload on the server.</maml:para>
        <maml:para>For example, the first retry after the original failed scan occurs after the interval specified by the DeferWaitTime parameter. The second retry after the first retry occurs after two times the value of the DeferWaitTime parameter. The third retry after the second retry occurs after three times the value of the DeferWaitTime parameter, and so on. The maximum number of retries is controlled by the DeferAttempts parameter.</maml:para>
        <maml:para>Valid input for this parameter is an integer between 0 and 15. The default value is 5. This means the first resubmit occurs 5 minutes after the original failed scan, the second retry occurs 10 minutes after the first retry, the third retry occurs 15 minutes after the second retry, and so on. The value 0 means messages are resubmitted for malware filtering after any failed scanning attempts without any delay.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ForceRescan</maml:name>
      <maml:description>
        <maml:para>The ForceRescan parameter specifies that messages should be scanned by the malware agent, even if the message was already scanned by Exchange Online Protection. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MinimumSuccessfulEngineScans</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PrimaryUpdatePath</maml:name>
      <maml:description>
        <maml:para>The PrimaryUpdatePath parameter specifies where to download malware scanning engine updates. The default value is http://forefrontdl.microsoft.com/server/scanengineupdate. The location specified by the PrimaryUpdatePath parameter is always tried first.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ScanErrorAction</maml:name>
      <maml:description>
        <maml:para>The ScanErrorAction parameter specifies the action to take when a message can't be scanned by the malware filter. Valid values for this parameter are Block or Allow. The default value is Block.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Block | Allow</command:parameterValue>
      <dev:type>
        <maml:name>Block | Allow</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ScanTimeout</maml:name>
      <maml:description>
        <maml:para>The ScanTimeout parameter specifies the timeout interval in seconds for messages that can't be scanned by the malware filter. Valid input for this parameter is an integer between 10 and 900. The default value is 300 (5 minutes).</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SecondaryUpdatePath</maml:name>
      <maml:description>
        <maml:para>The SecondaryUpdatePath parameter specifies an alternate download location for malware scanning engine updates. The default values is blank ($null). This means no alternate download location is specified.</maml:para>
        <maml:para>The alternate download location is used when the location specified by the PrimaryUpdatePath parameter is unavailable for the time period specified by the UpdateTimeout parameter. On the next malware scanning engine update, the location specified by the PrimaryUpdate path parameter is tried first.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UpdateFrequency</maml:name>
      <maml:description>
        <maml:para>The UpdateFrequency parameter specifies the frequency interval in minutes to check for malware scanning engine updates. Valid input for this parameter is an integer between 1 and 38880 (27 days). The default value is 60 (one hour). The locations to check for updates are specified by the PrimaryUpdatePath and SecondaryUpdatePath parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UpdateTimeout</maml:name>
      <maml:description>
        <maml:para>The UpdateTimeout parameter specifies the timeout interval in seconds to use when checking for malware scanning engine updates. Valid input for this parameter is an integer between 60 and 300. The default value is 150 seconds (2.5 minutes).</maml:para>
        <maml:para>If the location specified by the PrimaryUpdatePath parameter is unavailable for the time period specified by the UpdateTimeout parameter value, the location specified by the SecondaryUpdatePath parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the following Malware agent settings on the Mailbox server named Mailbox01:</maml:para>
        <maml:para />
        <maml:para>Sets the update frequency interval to 2 hours</maml:para>
        <maml:para>Sets the time to wait between resubmit attempts to 10 minutes</maml:para>
        <maml:para>Set-MalwareFilteringServer Mailbox01 -UpdateFrequency 120 -DeferWaitTime 10</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/54154f8c-3567-4d81-abc0-235f35f7ada8(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>54d3650c-fd80-43c0-a64f-41d57673ff8b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-SystemMessage</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-SystemMessage cmdlet to view the delivery status notification (DSN) or quota messages on Mailbox servers or Edge Transport servers.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>SystemMessage</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-SystemMessage</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">SystemMessageIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-SystemMessage</maml:name>
      <command:parameter required="False">
        <maml:name>Original</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the DSN or quota message you want to view.</maml:para>
        <maml:para>You can also retrieve a customized DSN message by using the following format: language\internal | external\system code. For more information about the syntax of the DSN message identity, see DSN message identity.</maml:para>
        <maml:para>You can also retrieve a customized quota message by using the following format: language\QuotaMessageType. Language is expressed as the two-character locale code. QuotaMessageType accepts the following values:</maml:para>
        <maml:para>Quota message types related to mailbox size:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitSendReceiveMailBox Issued when a mailbox exceeds its ProhibitSendReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProhibitSendMailbox Issued when a mailbox exceeds its ProhibitSendQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailbox Issued when a mailbox that has a ProhibitSendQuota limit or a ProhibitSendReceiveQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxUnlimitedSize Issued when a mailbox that doesn't have a ProhibitSendQuota limit or a ProhibitSendReceiveQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to public folder size:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitPostPublicFolder Issued when a public folder exceeds its ProhibitPostQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningPublicFolder Issued when a public folder that has a ProhibitPostQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningPublicFolderUnlimitedSize Issued when a public folder that doesn't have a ProhibitPostQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of messages allowed in a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveMailboxMessagesPerFolderCount Issued when a mailbox exceeds its MailboxMessagesPerFolderCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxMessagesPerFolderCount Issued when a mailbox that has a MailboxMessagesPerFolderCountReceiveQuota limit configured exceeds its MailboxMessagesPerFolderCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxMessagesPerFolderUnlimitedCount Issued when a mailbox that doesn't have a MailboxMessagesPerFolderCountReceiveQuota limit configured exceeds its MailboxMessagesPerFolderCountWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of subfolders that can be created in a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveFolderHierarchyChildrenCountCount Issued when a mailbox exceeds its FolderHierarchyChildrenCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyChildrenCount Issued when a mailbox that has a FolderHierarchyChildrenCountReceiveQuota limit configured exceeds its FolderHierarchyChildrenCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyChildrenUnlimitedCount Issued when a mailbox that doesn't have a FolderHierarchyChildrenCountReceiveQuota limit configured exceeds its FolderHierarchyChildrenCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFoldersCount Issued when the number of folders in the hierarchy exceeds the FoldersCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProhibitReceiveFoldersCount Issued when new public folder creation fails because the public folder hierarchy is too big and has reached the FoldersCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFoldersCountUnlimited Issued when the public folder hierarchy is getting too big and does not have the FoldersCountReceiveQuota limit configured.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of levels allowed in the folder hierarchy of a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveFolderHierarchyDepth Issued when a mailbox exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyDepth Issued when a mailbox that has a FolderHierarchyDepthReceiveQuota limit configured exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyDepthUnlimited Issued when a mailbox that doesn't have a FolderHierarchyDepthReceiveQuota limit configured exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">SystemMessageIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>SystemMessageIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Original</maml:name>
      <maml:description>
        <maml:para>The Original parameter specifies whether to retrieve the list of default DSN or quota messages that were included with Exchange when you installed Exchange.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays a list of all customized DSN and quota messages configured in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-SystemMessage</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed configuration information of the specific customized DSN message for DSN code 5.3.2.</maml:para>
        <maml:para />
        <maml:para>Get-SystemMessage En\Internal\5.3.2 | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed configuration information of the specific customized quota message for mailbox size warning.</maml:para>
        <maml:para />
        <maml:para>Get-SystemMessage En\WarningMailbox | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 4 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays a list of all built-in DSN and quota messages.</maml:para>
        <maml:para />
        <maml:para>Get-SystemMessage -Original</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-SystemMessage cmdlet displays default and customized DSN and quota messages. You can retrieve a customized DSN or quota message by specifying the identity of the message by using the Identity parameter. You can retrieve a list of built-in DSN or quota messages by using the Original parameter.</maml:para>
    <maml:para>DSN messages are issued to the sender of e-mail messages that haven't reached their intended recipients. Quota messages are issued to users whose mailboxes or public folders have reached the specific warning, prohibit send, or prohibit receive quotas. Customized DSN and quota messages replace the built-in DSN or quota messages included with Exchange.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "DSNs" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/54d3650c-fd80-43c0-a64f-41d57673ff8b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>54f1d3b1-a1d6-4438-900b-c77e94f1f6d7
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-MailboxTransportService</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-MailboxTransportService cmdlet to view the transport configuration information for the Mailbox Transport service on Mailbox servers.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>MailboxTransportService</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-MailboxTransportService</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxTransportServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server that you want to view.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxTransportServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxTransportServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays a list of all Mailbox servers in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-MailboxTransportService</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves the detailed transport configuration information for the Mailbox Transport service on the Mailbox server named Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Get-MailboxTransportService Mailbox01 | Format-List</maml:para>
        <maml:para />
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Mailbox Transport service runs on all Mailbox servers and is responsible for delivering messages to and accepting messages from local mailbox databases using remote procedure calls (RPC). The Mailbox Transport service also uses SMTP to send messages to and from the Transport service that runs on all Mailbox servers for routing their ultimate destinations.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Mailbox Transport service" entries in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/54f1d3b1-a1d6-4438-900b-c77e94f1f6d7(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>560a6958-c940-4c26-9a54-3f78965df32a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-MalwareFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-MalwareFilterPolicy cmdlet to view the malware filter policies in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>MalwareFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-MalwareFilterPolicy</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MalwareFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeInvalidPolicies</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the malware filter policy that you want to view. You can use any value that uniquely identifies the policy. For example, you can use the name, GUID or distinguished name (DN) of the malware filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MalwareFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MalwareFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeInvalidPolicies</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves a summary list of all malware filter policies in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-MalwareFilterPolicy</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves detailed configuration information for the malware filter policy named Default.</maml:para>
        <maml:para />
        <maml:para>Get-MalwareFilterPolicy Default | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Malware filter policies contain the malware settings and a list of domains to which those settings apply. A domain can't belong to more than one malware filter policy.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/560a6958-c940-4c26-9a54-3f78965df32a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>593be8fd-ae2d-4cd2-a98a-88c2e8c36ddd
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-FrontendTransportService</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-FrontEndTransportService cmdlet to set the transport configuration options for the Front End Transport service on Client Access servers.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>FrontendTransportService</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-FrontendTransportService</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">FrontendTransportServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AntispamAgentsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttributionLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttributionLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttributionLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttributionLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttributionLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSAdapterEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSAdapterGuid</maml:name>
        <command:parameterValue required="True">Guid</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSProtocolOption</maml:name>
        <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalIPAddress</maml:name>
        <command:parameterValue required="True">IPAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSAdapterEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSAdapterGuid</maml:name>
        <command:parameterValue required="True">Guid</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSProtocolOption</maml:name>
        <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IntraOrgConnectorProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConnectionRatePerMinute</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxReceiveTlsRatePerMinute</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmtpEnableAllTlsVersions</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransientFailureRetryCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransientFailureRetryInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server that you want to modify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">FrontendTransportServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>FrontendTransportServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogEnabled</maml:name>
      <maml:description>
        <maml:para>The AgentLogEnabled parameter specifies whether the agent log is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The AgentLogMaxAge parameter specifies the maximum age for the agent log file. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Setting the value of the AgentLogMaxAge parameter to 00:00:00 prevents the automatic removal of agent log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The AgentLogMaxDirectorySize parameter specifies the maximum size of all agent logs in the agent log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the AgentLogMaxFileSize parameter must be less than or equal to the value of the AgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The AgentLogMaxFileSize parameter specifies the maximum size of each agent log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the AgentLogMaxFileSize parameter must be less than or equal to the value of the AgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogPath</maml:name>
      <maml:description>
        <maml:para>The AgentLogPath parameter specifies the default agent log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\FrontEnd\AgentLog. Setting the value of this parameter to $null disables agent logging. However, setting this parameter to $null when the value of the AgentLogEnabled attribute is $true generates event log errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AntispamAgentsEnabled</maml:name>
      <maml:description>
        <maml:para>The AntispamAgentsEnabled parameter specifies whether anti-spam agents are installed on the server specified with the Identity parameter. The default value is $false for the Front End Transport service on Client Access servers.</maml:para>
        <maml:para>You set this parameter by using a script. You shouldn't modify this parameter manually.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttributionLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttributionLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttributionLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttributionLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttributionLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogEnabled</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogEnabled parameter specifies whether the connectivity log is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxAge parameter specifies the maximum age for the connectivity log file. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 25 days for this parameter, use 25.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the ConnectivityLogMaxAge parameter to 00:00:00 prevents the automatic removal of connectivity log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxDirectorySize parameter specifies the maximum size of all connectivity logs in the connectivity log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 1000 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxFileSize parameter specifies the maximum size of each connectivity log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogPath</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogPath parameter specifies the default connectivity log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\FrontEnd\Connectivity. Setting the value of this parameter to $null disables connectivity logging. However, setting this parameter to $null when the value of the ConnectivityLogEnabled attribute is $true generates event log errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogEnabled</maml:name>
      <maml:description>
        <maml:para>The DnsLogEnabled parameter specifies whether the DNS log is enabled. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The DnsLogMaxAge parameter specifies the maximum age for the DNS log file. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Setting the value of the DnsLogMaxAge parameter to 00:00:00 prevents the automatic removal of DNS log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The DnsLogMaxDirectorySize parameter specifies the maximum size of all DNS logs in the DNS log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 100 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the DnsLogMaxFileSize parameter must be less than or equal to the value of the DnsLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the DNS log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The DnsLogMaxFileSize parameter specifies the maximum size of each DNS log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the DnsLogMaxFileSize parameter must be less than or equal to the value of the DnsLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the DNS log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogPath</maml:name>
      <maml:description>
        <maml:para>The DnsLogPath parameter specifies the DNS log directory location. The default value is blank ($null), which indicates no location is configured. If you enable DNS logging, you need to specify a local file path for the DNS log files by using this parameter. If the path contains spaces, enclose the entire path value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSAdapterEnabled</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSAdapterEnabled parameter specifies one or more Domain Name System (DNS) servers that Exchange uses for external DNS lookups. When the ExternalDNSAdapterEnabled parameter is set to $true, DNS lookups of destinations outside the Exchange organization are performed by using the DNS settings of the external network adapter specified by the value of the ExternalDNSAdapterGuid parameter. If you want to specify a custom list of DNS servers used for external Exchange DNS lookups only, you must specify the DNS servers by using the ExternalDNSServers parameter, and you must also set the value of the ExternalDNSAdapterEnabled parameter to $false. The default value of the ExternalDNSAdapterEnabled parameter is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSAdapterGuid</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSAdapterGuid parameter specifies the network adapter that has the DNS settings used for DNS lookups of destinations that exist outside the Exchange organization. The concept of an external network adapter and an internal network adapter is only applicable in a multi-homed Exchange server environment. When no particular network adapter is specified as the network adapter for external DNS lookups, the value of the ExternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000, and external DNS lookups are performed by using the DNS settings of any available network adapter. You may enter the GUID of a specific network adapter to use for external DNS lookups. The default value of the ExternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000.</maml:para>
        <maml:para>If the value of the ExternalDNSAdapterEnabled parameter is set to $false, the value of the ExternalDNSAdapterGuid parameter is ignored, and the list of DNS servers from the ExternalDNSServers parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Guid</command:parameterValue>
      <dev:type>
        <maml:name>Guid</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSProtocolOption</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSProtocolOption parameter specifies which protocol to use when querying external DNS servers. The valid options for this parameter are Any, UseTcpOnly, and UseUdpOnly. The default value is Any.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      <dev:type>
        <maml:name>Any | UseUdpOnly | UseTcpOnly</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSServers</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSServers parameter specifies the list of external DNS servers that the server queries when resolving a remote domain. You must separate IP addresses by using commas. The default value is an empty list ({}).</maml:para>
        <maml:para>If the value of the ExternalDNSAdapterEnabled parameter is set to $true, the ExternalDNSServers parameter and its list of DNS servers isn't used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalIPAddress</maml:name>
      <maml:description>
        <maml:para>The ExternalIPAddress parameter specifies the IP address used in the Received message header field for every message that travels through the Front End Transport service on a Client Access server. The IP address in the Received header field is used for hop count and routing loop detection. The IP address specified by the ExternalIPAddress parameter overrides the external network adapter's actual IP address. Typically, you would want to set the value of the ExternalIPAddress parameter to match the value of your domain's public MX record. The default value of the ExternalIPAddress parameter is blank. This means the actual IP address of the external network adapter is used in the Received header field.</maml:para>
      </maml:description>
      <command:parameterValue required="True">IPAddress</command:parameterValue>
      <dev:type>
        <maml:name>IPAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSAdapterEnabled</maml:name>
      <maml:description>
        <maml:para>The InternalDNSAdapterEnabled parameter specifies one or more DNS servers that Exchange uses for internal DNS lookups. When the InternalDNSAdapterEnabled parameter is set to $true, DNS lookups of destinations inside the Exchange organization are performed by using the DNS settings of the internal network adapter specified by the value of the InternalDNSAdapterGuid parameter. If you want to specify a custom list of DNS servers used for internal Exchange DNS lookups only, you must specify the DNS servers by using the InternalDNSServers parameter, and you must also set the value of the InternalDNSAdapterEnabled parameter to $false. The default value of the InternalDNSAdapterEnabled parameter is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSAdapterGuid</maml:name>
      <maml:description>
        <maml:para>The InternalDNSAdapterGuid parameter specifies the network adapter that has the DNS settings used for DNS lookups of servers that exist inside the Exchange organization. The concept of an internal network adapter and an external network adapter is only applicable in a multi-homed Exchange server environment. When no particular network adapter is specified as the network adapter for external DNS lookups, the value of the InternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000, and internal DNS lookups are performed by using the DNS settings of any available network adapter. You may enter the GUID of a specific network adapter to use for internal DNS lookups. The default value of the InternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000.</maml:para>
        <maml:para>If the value of the InternalDNSAdapterEnabled parameter is set to $false, the value of the InternalDNSAdapterGuid parameter is ignored, and the list of DNS servers from the InternalDNSServers parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Guid</command:parameterValue>
      <dev:type>
        <maml:name>Guid</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSProtocolOption</maml:name>
      <maml:description>
        <maml:para>The InternalDNSProtocolOption parameter specifies which protocol to use when you query internal DNS servers. Valid options for this parameter are Any, UseTcpOnly, or UseUdpOnly.</maml:para>
        <maml:para>The default value is Any.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      <dev:type>
        <maml:name>Any | UseUdpOnly | UseTcpOnly</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSServers</maml:name>
      <maml:description>
        <maml:para>The InternalDNSServers parameter specifies the list of DNS servers that should be used when resolving a domain name. DNS servers are specified by IP address and are separated by commas. The default value is any empty list ({}).</maml:para>
        <maml:para>If the InternalDNSAdapterGuid parameter is set, and the value of the InternalDNSAdapterEnabled parameter is set to $true, the InternalDNSServers parameter and its list of DNS servers isn't used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IntraOrgConnectorProtocolLoggingLevel</maml:name>
      <maml:description>
        <maml:para>The IntraOrgConnectorProtocolLoggingLevel parameter enables or disables SMTP protocol logging on the implicit and invisible intra-organization Send connectors that are used to transmit messages between Exchange servers in the Exchange organization.</maml:para>
        <maml:para>Valid values for this parameter are None or Verbose. The value Verbose enables protocol logging for the connector. The value None disables protocol logging for the connector. The default value is None. When the IntraOrgConnectorProtocolLoggingLevel parameter is set to Verbose, the information is written to the Send connector protocol log specified by the SendProtocolLog parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>None | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConnectionRatePerMinute</maml:name>
      <maml:description>
        <maml:para>The MaxConnectionRatePerMinute parameter specifies the maximum rate that connections are allowed to be opened with the transport service. If many connections are attempted with the transport service at the same time, the MaxConnectionRatePerMinute parameter limits the rate that the connections are opened so that the server's resources aren't overwhelmed. The default value is 1200 connections per minute. The valid input range for this parameter is from 1 through 2147483647.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxReceiveTlsRatePerMinute</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxAge parameter specifies the maximum age of the Receive connector protocol log file. Log files that are older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 20 days for this parameter, use 20.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the ReceiveProtocolLogMaxAge parameter to 00:00:00 prevents the automatic removal of Receive connector protocol log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxDirectorySize parameter specifies the maximum size of the Receive connector protocol log directory shared by all the Receive connectors that exist on the server. When the maximum directory size is reached, the server deletes the oldest log files first. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ReceiveProtocolLogMaxFileSize parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Receive connector protocol log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxFileSize parameter specifies the maximum size of the Receive connector protocol log files shared by all the Receive connectors that exist on the server. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ReceiveProtocolLogMaxFileSize parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Receive connector protocol log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogPath</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogPath parameter specifies the path of the protocol log directory for all the Receive connectors that exist on the server. The default location is %ExchangeInstallPath%TransportRoles\Logs\FrontEnd\ProtocolLog\SmtpReceive. Setting the value of this parameter to $null disables protocol logging for all Receive connectors on the server. However, setting this parameter to $null when the value of the ProtocolLoggingLevel attribute for any Receive connector on the server is Verbose generates event log errors. The preferred method of disabling protocol logging is to use the Set-ReceiveConnector cmdlet to set the ProtocolLoggingLevel to None on each Receive connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxAge parameter specifies the Send connector protocol log file maximum age. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 25 days for this parameter, use 25.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the SendProtocolLogMaxAge parameter to 00:00:00 prevents the automatic removal of Send connector protocol log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxDirectorySize parameter specifies the maximum size of the Send connector protocol log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The minimum value is 1 MB. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the SendProtocolLogMaxFileSize parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Send connector protocol log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxFileSize parameter specifies the maximum size of the Send connector protocol log files shared by all the Send connectors that exist on a server. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the SendProtocolLogMaxFileSize parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Send connector protocol log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogPath</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogPath parameter specifies the location of protocol log storage for the Send connectors. The default location is %ExchangeInstallPath%TransportRoles\Logs\FrontEnd\ProtocolLog\SmtpSend. Setting the value of this parameter to $null disables protocol logging for all Send connectors on the server. However, setting this parameter to $null when the value of the ProtocolLoggingLevel or IntraOrgConnectorProtocolLoggingLevel attribute for any Send connector on the server is Verbose generates event log errors. The preferred method of disabling protocol logging is to use the Set-SendConnector cmdlet to set the ProtocolLoggingLevel parameter to None on each Send connector and to set the IntraOrgConnectorProtocolLoggingLevel parameter to None.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmtpEnableAllTlsVersions</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransientFailureRetryCount</maml:name>
      <maml:description>
        <maml:para>The TransientFailureRetryCount parameter specifies the maximum number of immediate connection retries attempted when the server encounters a connection failure with a remote server. The default value is 6. The valid input range for this parameter is from 0 through 15. When the value of this parameter is set to 0, the server doesn't immediately attempt to retry an unsuccessful connection.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransientFailureRetryInterval</maml:name>
      <maml:description>
        <maml:para>The TransientFailureRetryInterval parameter controls the connection interval between each connection attempt specified by the TransientFailureRetryCount parameter. For the Front End Transport service on a Client Access server, the default value of the TransientFailureRetryInterval parameter is 5 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 8 minutes for this parameter, use 00:08:00. The valid input range for this parameter is from 00:00:01 through 12:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the TransientFailureRetryCount parameter to 3 and sets the TransientFailureRetryInterval parameter to 30 seconds for the Front End Transport service on the Client Access server named CAS01.</maml:para>
        <maml:para />
        <maml:para>Set-FrontEndTransportService CAS01 -TransientFailureRetryCount 3 -TransientFailureRetryInterval 00:00:30</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the ReceiveProtocolLogPath parameter to C:\SMTP Protocol Logs\Receive.log for the Front End Transport service on the Client Access server named CAS01.</maml:para>
        <maml:para />
        <maml:para>Set-FrontEndTransportService CAS01 -ReceiveProtocolLogPath "C:\SMTP Protocol Logs\Receive.log"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Front End Transport service runs on all Client Access servers and acts as a stateless proxy for all inbound and outbound external SMTP traffic for the Exchange organization. The Front End Transport service only communicates with the Transport service on a Mailbox server, and doesn't queue any messages locally.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Front End Transport service" entries in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/593be8fd-ae2d-4cd2-a98a-88c2e8c36ddd(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>5a110133-35f3-4d45-8437-b8fed1218ac2
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Import-DlpPolicyCollection</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Import-DlpPolicyCollection cmdlet to import data loss prevention (DLP) policy collections into your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Import</command:verb>
    <command:noun>DlpPolicyCollection</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Import-DlpPolicyCollection</maml:name>
      <command:parameter required="True">
        <maml:name>FileData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="1">
      <maml:name>FileData</maml:name>
      <maml:description>
        <maml:para>The FileData parameter specifies the DLP policy collection file you want to import.</maml:para>
        <maml:para>For more information about the syntax required to use this parameter, see Syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress warning or confirmation messages. This switch can be used when the task is run programmatically and prompting for administrative input is inappropriate. If the Force switch isn't provided in the command, you're prompted for administrative input. You don't have to specify a value with this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the DLP policy you want to import. The DLP policy must exist in the XML file you specify with the FileData parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DlpPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example imports the DLP policy collection in the file C:\My Documents\DLP Backup.xml.</maml:para>
        <maml:para />
        <maml:para>Import-DlpPolicyCollection -FileData ([Byte[]]$(Get-Content -Path " C:\My Documents\DLP Backup.xml " -Encoding Byte -ReadCount 0))</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Import-DlpPolicyCollection cmdlet imports all the settings of the DLP policies and the associated transport rules. You use the Export-DlpPolicyCollection cmdlet to export the DLP policy collection.</maml:para>
    <maml:para>Importing a DLP policy collection from an XML file removes or overwrites all pre-existing DLP policies that were defined in your organization. Make sure that you have a backup of your current DLP policy collection before you import and overwrite your current DLP policies.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/5a110133-35f3-4d45-8437-b8fed1218ac2(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>60829f04-94a0-4228-a66c-f467aaca438b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-TransportRuleAction</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-TransportRuleAction cmdlet to retrieve a list of all available transport rule actions that can be used when creating a transport rule.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>TransportRuleAction</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-TransportRuleAction</maml:name>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the rule action to display. For a list of values that can be used with this parameter on the server role that you're administering, see Transport rule actions.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns all available transport rule actions.</maml:para>
        <maml:para />
        <maml:para>Get-TransportRuleAction</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves detailed information about a single transport rule action. The command is piped to the Format-List command to display all properties of the transport rule action.</maml:para>
        <maml:para />
        <maml:para>Get-TransportRuleAction -Name DeleteMessage | Format-List</maml:para>
        <maml:para>For more information about pipelining, see Pipelining. For more information about how to work with the output of a command, see Working with command output.</maml:para>
        <maml:para />
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-TransportRuleAction cmdlet displays a list of available actions you can use in transport.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport rules" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/60829f04-94a0-4228-a66c-f467aaca438b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>6097959b-7504-48b2-b8ef-c1237b29a94a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-MalwareFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the New-MalwareFilterRule cmdlet to create malware filter rules in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>MalwareFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-MalwareFilterRule</maml:name>
      <command:parameter required="True">
        <maml:name>MalwareFilterPolicy</maml:name>
        <command:parameterValue required="True">MalwareFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comments</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Priority</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MalwareFilterPolicy</maml:name>
      <maml:description>
        <maml:para>The MalwareFilterPolicy parameter specifies the malware filter policy to apply to messages that match the conditions defined by this malware filter rule.</maml:para>
        <maml:para>You can use any value that uniquely identifies the policy. For example, you can specify the name, GUID, or distinguished name (DN) of the content filter policy.</maml:para>
        <maml:para>You can't specify the default malware filter policy. And, you can't specify a malware filter policy that's already associated with another malware filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MalwareFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MalwareFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the malware filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comments</maml:name>
      <maml:description>
        <maml:para>The Comments parameter specifies informative comments for the rule, such as what the rule is used for or how it has changed over time. The length of the comment can't exceed 1024 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter enables or disables the malware filter rule. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientDomainIs parameter specifies the recipient's domain. The rule isn't applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentTo</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentTo parameter specifies a recipient. The rule isn't applied to messages sent to the specified recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentToMemberOf parameter specifies a distribution group. The rule isn't applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no exception is made.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Priority</maml:name>
      <maml:description>
        <maml:para>The Priority parameter specifies the priority for this rule. Rules with a lower priority value are processed first. If you modify the priority of the rule, the position of the rule in the rule list changes to match the priority that you specified.</maml:para>
        <maml:para>The value of this parameter must be greater than or equal to 0, and must be one less than the total number of rules in your organization. For example, if you configured 8 rules, you can set this parameter to any value from 0 through 7.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The RecipientDomainIs parameter specifies the recipient's domain. The rule is applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentTo</maml:name>
      <maml:description>
        <maml:para>The SentTo parameter specifies a recipient. The rule is applied to messages sent to the specified recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The SentToMemberOf parameter specifies a distribution group. The rule is applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no action is taken.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a new malware filter rule named Contoso Recipients with the following settings: If the recipient is in the domain contoso.com, apply the malware filter policy named Contoso Malware Filter Policy.</maml:para>
        <maml:para />
        <maml:para>New-MalwareFilterRule -Name "Contoso Recipients" -MalwareFilterPolicy "Contoso Malware Filter Policy" -RecipientDomainIs contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/6097959b-7504-48b2-b8ef-c1237b29a94a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>62d403c8-d1cf-4507-a0d7-342bdfb17a9a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-MessageCategory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-MessageCategory cmdlet to retrieve a message category from the specified mailbox.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>MessageCategory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-MessageCategory</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MessageCategoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the message category to be retrieved.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageCategoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MessageCategoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the identity of a mailbox user to retrieve the message category from.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves message categories from the mailbox User1.</maml:para>
        <maml:para />
        <maml:para>Get-MessageCategory -Mailbox "User1"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-MessageCategory cmdlet is used by the web management interface in Microsoft Exchange to populate fields that display message category information.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Message categories" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/62d403c8-d1cf-4507-a0d7-342bdfb17a9a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>63a14c30-331d-458b-91d1-71d28a6e3d5a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-TransportRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-TransportRule cmdlet to view transport rules configured in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>TransportRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-TransportRule</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DlpPolicy</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>State</maml:name>
        <command:parameterValue required="True">Enabled | Disabled</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DlpPolicy</maml:name>
      <maml:description>
        <maml:para>The DlpPolicy parameter specifies the data loss prevention (DLP) policy when you want to view the rules associated with a specific DLP policy. DLP policies in your organization allow you to prevent unintentional disclosure of sensitive information. Each DLP policy is enforced using a set of transport rules. If you want to view the rules that are used to support a specific DLP policy, use this parameter to specify the name of that policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter specifies an OPath filter that returns all transport rules that match the specified search criteria. This parameter searches the Description property, which includes the conditions, exceptions, actions and the associated values of a transport rule.</maml:para>
        <maml:para>This parameter uses the syntax -Filter "Description -like '*&lt;text&gt;*'". For example, -Filter "Description -like *192.168.1.1*'".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the transport rule you want to view. Enter either the name or GUID of the rule. You can omit this parameter label.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the maximum number of results to return. If you want to return all requests that match the query, use unlimited for the value of this parameter. The default value is 1000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>State</maml:name>
      <maml:description>
        <maml:para>The State parameter specifies whether to return only the rules that are enabled or the ones that are disabled. The following values are valid for this parameter:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Enabled The command returns only the rules that are currently enabled.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Disabled The command returns only the rules that are currently disabled.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use this parameter, the command returns all rules, both enabled and disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Enabled | Disabled</command:parameterValue>
      <dev:type>
        <maml:name>Enabled | Disabled</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns all transport rules configured in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-TransportRule</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns only the rule that matches the name "Block email messages between Sales and Brokerage Groups". The command is piped to the Format-List cmdlet to display the detailed configuration of the specified transport rule.</maml:para>
        <maml:para />
        <maml:para>Get-TransportRule "Block email messages between Sales and Brokerage Groups" | Format-List</maml:para>
        <maml:para>For more information about pipelining, see Pipelining. For more information about how to work with the output of a command, see Working with command output.</maml:para>
        <maml:para />
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns the rules that are used to enforce the DLP policy PII (U.S.) in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-TransportRule -DlpPolicy "PII (U.S.)"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 4 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns all rules in your organization that are used to enforce DLP policies in your organization. The command output is filtered to display only those rules that have a value for their DlpPolicy attribute.</maml:para>
        <maml:para />
        <maml:para>Get-TransportRule | Where {$_.DlpPolicy -ne $null}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-TransportRule cmdlet lets you view the configuration of transport rules that are defined in your organization.</maml:para>
    <maml:para>For information about how to configure transport rules in your organization, see Set-TransportRule. To learn more about transport rules, see Transport rules.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport rules" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/63a14c30-331d-458b-91d1-71d28a6e3d5a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>64a6d710-0297-453b-aa35-3ae0a65bd81e
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-QueueDigest</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-QueueDigest cmdlet to view information about message delivery queues across database availability groups (DAGs) Active Directory sites, or Active Directory forests in your organization.</maml:para>
      <maml:para>By default, the Get-QueueDigest cmdlet displays delivery queues that contain ten or more messages, and the results are between one and two minutes old. For instructions on how to change these default values, see Configure Get-QueueDigest.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>QueueDigest</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-QueueDigest</maml:name>
      <command:parameter required="True">
        <maml:name>Dag</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DetailsLevel</maml:name>
        <command:parameterValue required="True">None | Normal | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GroupBy</maml:name>
        <command:parameterValue required="True">NextHopDomain | NextHopCategory | NextHopKey | DeliveryType | Status | RiskLevel | LastError | ServerName | OutboundIPPool</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeE14Servers</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mtrt</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Timeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-QueueDigest</maml:name>
      <command:parameter required="True">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DetailsLevel</maml:name>
        <command:parameterValue required="True">None | Normal | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GroupBy</maml:name>
        <command:parameterValue required="True">NextHopDomain | NextHopCategory | NextHopKey | DeliveryType | Status | RiskLevel | LastError | ServerName | OutboundIPPool</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeE14Servers</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mtrt</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Timeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-QueueDigest</maml:name>
      <command:parameter required="True">
        <maml:name>Site</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DetailsLevel</maml:name>
        <command:parameterValue required="True">None | Normal | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GroupBy</maml:name>
        <command:parameterValue required="True">NextHopDomain | NextHopCategory | NextHopKey | DeliveryType | Status | RiskLevel | LastError | ServerName | OutboundIPPool</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeE14Servers</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mtrt</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Timeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-QueueDigest</maml:name>
      <command:parameter required="True">
        <maml:name>Forest</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DetailsLevel</maml:name>
        <command:parameterValue required="True">None | Normal | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GroupBy</maml:name>
        <command:parameterValue required="True">NextHopDomain | NextHopCategory | NextHopKey | DeliveryType | Status | RiskLevel | LastError | ServerName | OutboundIPPool</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeE14Servers</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mtrt</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Timeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Dag</maml:name>
      <maml:description>
        <maml:para>The Dag parameter filters the delivery queue results by DAG. You can specify any value that uniquely identifies the DAG. You can specify multiple values separated by commas. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
        <maml:para>You can't use the Dag parameter with the Server, Site or Forest parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Forest</maml:name>
      <maml:description>
        <maml:para>The Forest switch filters the delivery queue results by Active Directory forest. You don't need to specify a value with the Forest switch.</maml:para>
        <maml:para>You can't use the Forest switch with the Server, Site or Dag parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter filters the delivery queue results by Exchange server. You can specify any value that uniquely identifies the server. You can specify multiple values separated by commas. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
        <maml:para>You can't use the Server parameter with the Dag, Site or Forest parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Site</maml:name>
      <maml:description>
        <maml:para>The Site parameter filters the delivery queue results by Active Directory site. You can specify any value that uniquely identifies the site. You can specify multiple sites separated by commas.</maml:para>
        <maml:para>You can't use the Site parameter with the Server, Dag or Forest parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DetailsLevel</maml:name>
      <maml:description>
        <maml:para>The DetailsLevel parameter specifies the level of detail to display in the results. Valid values for this parameter are None, Normal and Verbose. The default value is Normal.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Normal | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>None | Normal | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter specifies one or more queues by using OPath filter syntax. The OPath filter includes a queue property name followed by a comparison operator and value, for example, {NextHopDomain -eq "contoso.com"}. For details about filterable queue properties and comparison operators, see Queue filters and Use the Exchange Management Shell to manage queues.</maml:para>
        <maml:para>You can specify multiple criteria by using the and comparison operator. Property values that aren't expressed as an integer must be enclosed in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GroupBy</maml:name>
      <maml:description>
        <maml:para>The GroupedBy parameter sorts the messages in the delivery queue results. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DeliveryType</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastError</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NextHopCategory</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NextHopDomain</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NextHopKey</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RiskLevel</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Status</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ServerName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OutboundIPPool</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is NextHopDomain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">NextHopDomain | NextHopCategory | NextHopKey | DeliveryType | Status | RiskLevel | LastError | ServerName | OutboundIPPool</command:parameterValue>
      <dev:type>
        <maml:name>NextHopDomain | NextHopCategory | NextHopKey | DeliveryType | Status | RiskLevel | LastError | ServerName | OutboundIPPool</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeE14Servers</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mtrt</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter filters the delivery queue results by the number of messages in the queue. Valid input for this parameter is an integer. The default value is 1000. For example, if you specify the value 50, the command displays the 50 queues that contain the most messages.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Timeout</maml:name>
      <maml:description>
        <maml:para>The Timeout parameter specifies the number of seconds before the operation times out. The default value is 10 seconds.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns information about all queues in the Active Directory forest.</maml:para>
        <maml:para />
        <maml:para>Get-QueueDigest -Forest</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns information about all queues in the DAG named DAG01.</maml:para>
        <maml:para />
        <maml:para>Get-QueueDigest -Dag DAG01</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/64a6d710-0297-453b-aa35-3ae0a65bd81e(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>665d1b04-d4b5-4a0e-811a-4e37096ccbfd
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-HostedOutboundSpamFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-HostedOutboundSpamFilterPolicy cmdlet to modify the settings of the outbound spam filter policy in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>HostedOutboundSpamFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-HostedOutboundSpamFilterPolicy</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">HostedOutboundSpamFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdminDisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BccSuspiciousOutboundAdditionalRecipients</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BccSuspiciousOutboundMail</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>NotifyOutboundSpam</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>NotifyOutboundSpamRecipients</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the outbound spam filter policy you want to modify. You can use any value that uniquely identifies the policy. For example, you can specify the name, GUID, or distinguished name (DN) of the outbound spam filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HostedOutboundSpamFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>HostedOutboundSpamFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdminDisplayName</maml:name>
      <maml:description>
        <maml:para>The AdminDisplayName parameter specifies a description for the outbound spam filter policy. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BccSuspiciousOutboundAdditionalRecipients</maml:name>
      <maml:description>
        <maml:para>The BccSuspiciousOutboundAdditionalRecipients parameter specifies the recipients to add to the Bcc field of outgoing spam messages. Valid input for this parameter is an email address. Separate multiple email addresses with commas.</maml:para>
        <maml:para>The specified recipients are added to the Bcc field of outgoing spam messages when the value of the BccSuspiciousOutboundMail parameter is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BccSuspiciousOutboundMail</maml:name>
      <maml:description>
        <maml:para>The BccSuspiciousOutboundMail parameter enables or disables adding recipients to the Bcc field of outgoing spam messages. Valid input for this parameter is $true or $false. The default value is $false. You specify the additional recipients using the BccSuspiciousOutboundAdditionalRecipients parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>NotifyOutboundSpam</maml:name>
      <maml:description>
        <maml:para>The NotifyOutboundSpam parameter enables or disables sending notification messages to administrators when an outgoing message is determined to be spam. Valid input for this parameter is $true or $false. The default value is $false. You specify the administrators to notify by using the NotifyOutboundSpamRecipients parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>NotifyOutboundSpamRecipients</maml:name>
      <maml:description>
        <maml:para>The NotifyOutboundSpamRecipients parameter specifies the administrators to notify when an outgoing message is determined to be spam. Valid input for this parameter is an email address. Separate multiple email addresses with commas.</maml:para>
        <maml:para>The specified recipients receive notifications when the value of the NotifyOutboundSpamRecipients parameter is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example configures the following settings in the outbound spam filter policy named Default:</maml:para>
        <maml:para />
        <maml:para>Notification messages are sent when an outgoing message is determined to be spam.</maml:para>
        <maml:para>Notification messages are sent to chris@contoso.com.</maml:para>
        <maml:para>Set-HostedOutboundSpamFilterPolicy Default -NotifyOutboundSpam $true -NotifyOutboundSpamRecipients chris@contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/665d1b04-d4b5-4a0e-811a-4e37096ccbfd(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>6d21f091-def4-49a8-ab44-d36b9a12499d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-InboundConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-InboundConnector cmdlet to change an existing Inbound connector in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>InboundConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-InboundConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">InboundConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AssociatedAcceptedDomains</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassValidation</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CloudServicesMailEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectorSource</maml:name>
        <command:parameterValue required="True">Default | Migrated | HybridWizard</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectorType</maml:name>
        <command:parameterValue required="True">OnPremises | Partner</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireTls</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RestrictDomainsToCertificate</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RestrictDomainsToIPAddresses</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderDomains</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderIPAddresses</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsSenderCertificateName</maml:name>
        <command:parameterValue required="True">TlsCertificate</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the Inbound connector you want to change.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InboundConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>InboundConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AssociatedAcceptedDomains</maml:name>
      <maml:description>
        <maml:para>The AssociatedAcceptedDomains parameter specifies the accepted domains that the connector applies to, thereby limiting its scope. For example, you can apply the connector to a specific accepted domain in your organization, such as contoso.com.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BypassValidation</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CloudServicesMailEnabled</maml:name>
      <maml:description>
        <maml:para>Set to $true to enable this connector to receive messages from the cloud service.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comment</maml:name>
      <maml:description>
        <maml:para>The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectorSource</maml:name>
      <maml:description>
        <maml:para>The ConnectorSource parameter specifies how the connector was created. Valid input for this parameter includes the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Default The connector is manually created.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HybridWizard The connector is created automatically by the Hybrid Configuration Wizard.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Migrated The connector was originally created in Microsoft Forefront Online Protection for Exchange.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value for connectors you create is Default. It isn't recommended that you change this value.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Default | Migrated | HybridWizard</command:parameterValue>
      <dev:type>
        <maml:name>Default | Migrated | HybridWizard</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectorType</maml:name>
      <maml:description>
        <maml:para>The ConnectorType parameter specifies a category for the domains that are serviced by the connector. Valid input for this parameter includes the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Partner The connector services domains that are external to your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OnPremises The connector services domains that are used by your on-premises organization. Use this value for accepted domains in your cloud-based organization that are also specified by the SenderDomains parameter.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">OnPremises | Partner</command:parameterValue>
      <dev:type>
        <maml:name>OnPremises | Partner</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter enables or disables the connector. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a descriptive name for the connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequireTls</maml:name>
      <maml:description>
        <maml:para>The RequireTLS parameter specifies that all messages received by this connector require TLS transmission. Valid values for this parameter are $true or $false. The default value is $false. When the RequireTLS parameter is set to $true, all messages received by this connector require TLS transmission.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RestrictDomainsToCertificate</maml:name>
      <maml:description>
        <maml:para>The RestrictDomainsToCertificate parameter, when set to $true, causes the connector to reject mail that originates from a namespace not specified by the TlsSenderCertificateName parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RestrictDomainsToIPAddresses</maml:name>
      <maml:description>
        <maml:para>The RestrictDomainsToIPAddresses parameter, when set to $true, automatically rejects mail from the domains specified by the SenderDomains parameter if the mail originates from an IP address that isn't specified by the SenderIPAddresses parameter.</maml:para>
        <maml:para>Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderDomains</maml:name>
      <maml:description>
        <maml:para>The SenderDomains parameter specifies the remote domains from which this connector accepts messages, thereby limiting its scope. You can use a wildcard character to specify all subdomains of a specified domain, as shown in the following example: *.contoso.com. However, you can't embed a wildcard character, as shown in the following example: domain.*.contoso.com.</maml:para>
        <maml:para>You can specify multiple domains separated by commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderIPAddresses</maml:name>
      <maml:description>
        <maml:para>The SenderIPAddresses parameter specifies the remote IP addresses from which this connector accepts messages. You enter the IP addresses using the following syntax:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Single IP For example, 192.168.1.1.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CIDR IP You can use Classless InterDomain Routing (CIDR). For example, 192.168.0.1/25.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can specify multiple IP addresses separated by commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsSenderCertificateName</maml:name>
      <maml:description>
        <maml:para>The TlsSenderCertificateName parameter specifies the certificate used by the sender's domain when the RequireTls parameter is set to $true. Valid input for the TlsSenderCertificateName parameter is an SMTP domain. You can use a wildcard character to specify all subdomains of a specified domain, as shown in the following example: *.contoso.com.</maml:para>
        <maml:para>You can't embed a wildcard character, as shown in the following example: domain.*.contoso.com.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TlsCertificate</command:parameterValue>
      <dev:type>
        <maml:name>TlsCertificate</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example makes the following configuration changes to the existing Inbound connector named Contoso.com Inbound Connector.</maml:para>
        <maml:para />
        <maml:para>Require TLS transmission for all incoming messages on the connector.</maml:para>
        <maml:para>Require that the TLS certificate that is used to encrypt communications contain the domain name contoso.com</maml:para>
        <maml:para>Set-InboundConnector "Contoso Inbound Connector" -RequireTls $true -TlsSenderCertificateName contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Inbound connectors accept email messages from remote domains that require specific configuration options.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbound and Outbound connectors" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/6d21f091-def4-49a8-ab44-d36b9a12499d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>6fac5dca-be09-4296-aebf-b12bb55ce4d3
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-DlpPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the New-DlpPolicy cmdlet to create data loss prevention (DLP) policies in your Exchange organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>DlpPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-DlpPolicy</maml:name>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Description</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mode</maml:name>
        <command:parameterValue required="True">Audit | AuditAndNotify | Enforce</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Parameters</maml:name>
        <command:parameterValue required="True">Hashtable</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>State</maml:name>
        <command:parameterValue required="True">Enabled | Disabled</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Template</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TemplateData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Description</maml:name>
      <maml:description>
        <maml:para>The Description parameter specifies an optional description for the DLP policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mode</maml:name>
      <maml:description>
        <maml:para>The Mode parameter specifies the action and notification level of the DLP policy. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Audit: The actions specified by the DLP policy aren't enforced when a message matches the conditions specified by the policy, and the Policy Tip isn't displayed to the user.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AuditAndNotify: The actions specified by the DLP policy aren't enforced when a message matches the conditions specified by the policy, but the Policy Tip is displayed to the user in a supported email client.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Enforce: The actions specified by the DLP policy are enforced when a message matches the conditions specified by the policy, and the Policy Tip is displayed to the user in a supported email client.</maml:para>
        </command:listItem></command:list>
        <maml:para>By default, the value of this parameter is set to Audit when you create a new DLP policy. If the State parameter is set to Disabled, the value of the Mode parameter is irrelevant.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Audit | AuditAndNotify | Enforce</command:parameterValue>
      <dev:type>
        <maml:name>Audit | AuditAndNotify | Enforce</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a descriptive name for the DLP policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Parameters</maml:name>
      <maml:description>
        <maml:para>The Parameters parameter specifies the parameter values that are required by the DLP policy template that you specify using the Template or TemplateData parameters. DLP policy templates may contain parameters that need to be populated with values from your organization. For example, a DLP policy template may include an exception group that defines users who are exempt from the DLP policy.</maml:para>
        <maml:para>Valid input for this parameter is in the format: @{&lt;parameter1&gt;="&lt;value1&gt;";&lt;parameter2&gt;="&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Hashtable</command:parameterValue>
      <dev:type>
        <maml:name>Hashtable</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>State</maml:name>
      <maml:description>
        <maml:para>The State parameter enables or disables the DLP policy. Valid input for this parameter is Enabled or Disabled. By default, a new DLP policy that you create is enabled. If you want to create a disabled DLP policy, specify the value Disabled for this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Enabled | Disabled</command:parameterValue>
      <dev:type>
        <maml:name>Enabled | Disabled</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Template</maml:name>
      <maml:description>
        <maml:para>The Template parameter specifies the existing DLP policy template from which you can create a new DLP policy. You can't use the Template and TemplateData parameters in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TemplateData</maml:name>
      <maml:description>
        <maml:para>The TemplateData parameter specifies an external DLP policy template file from which you can create a new DLP policy. You can't use the TemplateData and Template parameters in the same command.</maml:para>
        <maml:para>For more information about the syntax required to use this parameter, see Syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a new DLP policy named Contoso PII with the following values:</maml:para>
        <maml:para />
        <maml:para>The DLP policy is enabled and set to audit only.</maml:para>
        <maml:para>The DLP policy is based on the existing "U.S. Personally Identifiable Information (PII) Data" DLP policy template.</maml:para>
        <maml:para>New-DlpPolicy -Name "Contoso PII" -Template "U.S. Personally Identifiable Information (PII) Data"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/6fac5dca-be09-4296-aebf-b12bb55ce4d3(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>7036d1ac-e9ef-437d-9035-79449e6572d6
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-MalwareFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Enable-MalwareFilterRule cmdlet to view malware filter rules in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>MalwareFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-MalwareFilterRule</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>State</maml:name>
        <command:parameterValue required="True">Enabled | Disabled</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the malware filter rule that you want to view. You can use any value that uniquely identifies the rule. For example, you can use the name, GUID or distinguished name (DN) of the malware filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>State</maml:name>
      <maml:description>
        <maml:para>The State parameter filters the results by enabled or disabled malware filter rules. Valid input for this parameter is Enabled or Disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Enabled | Disabled</command:parameterValue>
      <dev:type>
        <maml:name>Enabled | Disabled</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves a summary list of all malware filter rules in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-MalwareFilterRule</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves detailed configuration information for the malware filter rule named Contoso Recipients.</maml:para>
        <maml:para />
        <maml:para>Get-MalwareFilterRule "Contoso Recipients" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/7036d1ac-e9ef-437d-9035-79449e6572d6(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>72b8e608-1c1a-4e6f-a2db-27a812f185f3
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-NetworkConnectionInfo</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-NetworkConnectionInfo cmdlet to view the network configuration information for all network adapters configured on the local server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>NetworkConnectionInfo</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-NetworkConnectionInfo</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server you want to query. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Identity parameter, the command is run on the local server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves network configuration information for all network adapters on the server named Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Get-NetworkConnectionInfo Mailbox01</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>This cmdlet retrieves the following configuration information for each network adapter configured on the server:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>Name: This field displays the name of the network adapter. This name indicates the manufacturer and model of the network adapter, or the administrator-specified name of the network adapter.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>DnsServers: This field displays the DNS servers used by the network adapter. The server names are separated by commas.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>IPAddresses: This field displays the IP addresses used by the network adapter. The IP addresses are separated by commas.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>AdapterGuid: This field displays the GUID assigned to the network adapter by Windows.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>MacAddress: This field displays the media access control (MAC) address of the network adapter.</maml:para>
    </command:listItem></command:list>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport service" and "Edge Transport server" entries in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/72b8e608-1c1a-4e6f-a2db-27a812f185f3(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>72ed234d-cd25-4070-a5b2-ae5f056cc6a0
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-MailboxTransportService</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-MailboxTransportService cmdlet to view the transport configuration information for the Mailbox Transport service on Mailbox servers.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>MailboxTransportService</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-MailboxTransportService</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxTransportServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ContentConversionTracingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryAgentLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryAgentLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryAgentLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryAgentLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryAgentLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryConnectorProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryConnectorSmtpUtf8Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryThrottlingLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryThrottlingLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryThrottlingLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryThrottlingLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxDeliveryThrottlingLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxSubmissionAgentLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxSubmissionAgentLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxSubmissionAgentLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxSubmissionAgentLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxSubmissionAgentLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConcurrentMailboxDeliveries</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConcurrentMailboxSubmissions</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipelineTracingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipelineTracingPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipelineTracingSenderAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmtpEnableAllTlsVersions</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server that you want to modify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxTransportServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxTransportServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogEnabled</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogEnabled parameter specifies whether the connectivity log is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxAge parameter specifies the maximum age for the connectivity log file. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 25 days for this parameter, use 25.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the ConnectivityLogMaxAge parameter to 00:00:00 prevents the automatic removal of connectivity log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxDirectorySize parameter specifies the maximum size of all connectivity logs in the connectivity log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 1000 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxFileSize parameter specifies the maximum size of each connectivity log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogPath</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogPath parameter specifies the default connectivity log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\Mailbox\Connectivity. Setting the value of this parameter to $null disables connectivity logging. However, setting this parameter to $null when the value of the ConnectivityLogEnabled attribute is $true generates event log errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ContentConversionTracingEnabled</maml:name>
      <maml:description>
        <maml:para>The ContentConversionTracingEnabled parameter specifies whether content conversion tracing is enabled. Content conversion tracing captures content conversion failures that occur in the Transport service or in the Mailbox Transport service on the Mailbox server. The default value is $false. Content conversion tracing captures a maximum of 128 MB of content conversion failures. When the 128 MB limit is reached, no more content conversion failures are captured. Content conversion tracing captures the complete contents of email messages to the path specified by the PipelineTracingPath parameter. Make sure that you restrict access to this directory. The permissions required on the directory specified by the PipelineTracingPath parameter are as follows:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Administrators: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Network Service: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>System: Full Control</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryAgentLogEnabled</maml:name>
      <maml:description>
        <maml:para>The MailboxDeliveryAgentLogEnabled parameter specifies whether the agent log for the Mailbox Transport Delivery service is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryAgentLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The MailboxDeliveryAgentLogMaxAge parameter specifies the maximum age for the agent log file of the Mailbox Transport Delivery service. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Setting the value of the MailboxDeliveryAgentLogMaxAge parameter to 00:00:00 prevents the automatic removal of agent log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryAgentLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The MailboxDeliveryAgentLogMaxDirectorySize parameter specifies the maximum size of all Mailbox Transport Delivery service agent logs in the agent log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the MailboxDeliveryAgentLogMaxFileSize parameter must be less than or equal to the value of the MailboxDeliveryAgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryAgentLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The MailboxDeliveryAgentLogMaxFileSize parameter specifies the maximum size of each agent log file for the Mailbox Transport Delivery service. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the MailboxDeliveryAgentLogMaxFileSize parameter must be less than or equal to the value of the MailboxDeliveryAgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryAgentLogPath</maml:name>
      <maml:description>
        <maml:para>The MailboxDeliveryAgentLogPath parameter specifies the default agent log directory location for the Mailbox Transport Delivery service. The default location is %ExchangeInstallPath%TransportRoles\Logs\Mailbox\AgentLog\Delivery. Setting the value of this parameter to $null disables agent logging. However, setting this parameter to $null when the value of the MailboxDeliveryAgentLogEnabled attribute is $true generates event log errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryConnectorProtocolLoggingLevel</maml:name>
      <maml:description>
        <maml:para>The MailboxDeliveryConnectorProtocolLoggingLevel parameter sets the protocol logging level for messages transferred from the Transport service to the Mailbox Transport Delivery service on Mailbox servers using SMTP. Valid values for this parameter are None and Verbose. The default value is None.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>None | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryConnectorSmtpUtf8Enabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryThrottlingLogEnabled</maml:name>
      <maml:description>
        <maml:para>The MailboxDeliveryThrottlingLogEnabled parameter specifies whether the mailbox delivery throttling log is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryThrottlingLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The MailboxDeliveryThrottlingLogMaxAge parameter specifies the maximum age for the mailbox delivery throttling log file. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Setting the value of the MailboxDeliveryThrottlingLogMaxAge parameter to 00:00:00 prevents the automatic removal of mailbox delivery throttling log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryThrottlingLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The MailboxDeliveryThrottlingLogMaxDirectorySize parameter specifies the maximum size of all mailbox delivery throttling logs in the mailbox delivery throttling log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 200 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the MailboxDeliveryThrottlingLogMaxFileSize parameter must be less than or equal to the value of the MailboxDeliveryThrottlingLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the mailbox delivery throttling log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryThrottlingLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The MailboxDeliveryThrottlingLogMaxFileSize parameter specifies the maximum size of each mailbox delivery throttling log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the MailboxDeliveryThrottlingLogMaxFileSize parameter must be less than or equal to the value of the MailboxDeliveryThrottlingLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the mailbox delivery throttling log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxDeliveryThrottlingLogPath</maml:name>
      <maml:description>
        <maml:para>The MailboxDeliveryThrottlingLogPath parameter specifies the default mailbox delivery throttling log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\Throttling\Delivery. Setting the value of this parameter to $null disables mailbox delivery throttling logging. However, setting this parameter to $null when the value of the MailboxDeliveryThrottlingLogEnabled attribute is $true generates event log errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxSubmissionAgentLogEnabled</maml:name>
      <maml:description>
        <maml:para>The MailboxSubmissionAgentLogEnabled parameter specifies whether the agent log is enabled for the Mailbox Transport Submission service. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxSubmissionAgentLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The MailboxSubmissionAgentLogMaxAge parameter specifies the maximum age for the agent log file of the Mailbox Transport Submission service. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Setting the value of the MailboxSubmissionAgentLogMaxAge parameter to 00:00:00 prevents the automatic removal of agent log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxSubmissionAgentLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The MailboxSubmissionAgentLogMaxDirectorySize parameter specifies the maximum size of all Mailbox Transport Submission service agent logs in the agent log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the MailboxSubmissionAgentLogMaxFileSize parameter must be less than or equal to the value of the MailboxSubmissionAgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxSubmissionAgentLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The MailboxSubmissionAgentLogMaxFileSize parameter specifies the maximum size of each agent log file for the Mailbox Transport Submission service. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the MailboxSubmissionAgentLogMaxFileSize parameter must be less than or equal to the value of the MailboxSubmissionAgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxSubmissionAgentLogPath</maml:name>
      <maml:description>
        <maml:para>The MailboxSubmissionAgentLogPath parameter specifies the default agent log directory location for the Mailbox Transport Submission service. The default location is %ExchangeInstallPath%TransportRoles\Logs\Mailbox\AgentLog\Submission. Setting the value of this parameter to $null disables agent logging. However, setting this parameter to $null when the value of the MailboxSubmissionAgentLogEnabled attribute is $true generates event log errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConcurrentMailboxDeliveries</maml:name>
      <maml:description>
        <maml:para>The MaxConcurrentMailboxDeliveries parameter specifies the maximum number of delivery threads that the transport service can have open at the same time to deliver messages to mailboxes. The default value is 20. The valid input range for this parameter is from 1 through 256. We recommend that you don't modify the default value unless Microsoft Customer Service and Support advises you to do this.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConcurrentMailboxSubmissions</maml:name>
      <maml:description>
        <maml:para>The MaxConcurrentMailboxSubmissions parameter specifies the maximum number of submission threads that the transport service can have open at the same time to send messages from mailboxes. The default value is 20. The valid input range for this parameter is from 1 through 256.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PipelineTracingEnabled</maml:name>
      <maml:description>
        <maml:para>The PipelineTracingEnabled parameter specifies whether to enable pipeline tracing. Pipeline tracing captures message snapshot files that record the changes made to the message by each transport agent configured in the transport service on the server. Pipeline tracing creates verbose log files that accumulate quickly. Pipeline tracing should only be enabled for a short time to provide in-depth diagnostic information that enables you to troubleshoot problems. In addition to troubleshooting, you can use pipeline tracing to validate changes that you make to the configuration of the transport service where you enable pipeline tracing. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PipelineTracingPath</maml:name>
      <maml:description>
        <maml:para>The PipelineTracingPath parameter specifies the location of the pipeline tracing logs. The default location is %ExchangeInstallPath%TransportRoles\Mailbox\Hub\PipelineTracing. The path must be local to the Exchange computer. Setting the value of this parameter to $null disables pipeline tracing. However, setting this parameter to $null when the value of the PipelineTracingEnabled attribute is $true generates event log errors. The preferred method to disable pipeline tracing is to use the PipelineTracingEnabled parameter. Pipeline tracing captures the complete contents of email messages to the path specified by the PipelineTracingPath parameter. Make sure that you restrict access to this directory. The permissions required on the directory specified by the PipelineTracingPath parameter are as follows:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Administrators: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Network Service: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>System: Full Control</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PipelineTracingSenderAddress</maml:name>
      <maml:description>
        <maml:para>The PipelineTracingSenderAddress parameter specifies the sender email address that invokes pipeline tracing. Only messages from this address generate pipeline tracing output. The address can be either inside or outside the Exchange organization. Depending on your requirements, you may have to set this parameter to different sender addresses and send new messages to start the transport agents or routes that you want to test. The default value of this parameter is $null.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxAge parameter specifies the maximum age of the Receive connector protocol log file. Log files that are older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 20 days for this parameter, use 20.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the ReceiveProtocolLogMaxAge parameter to 00:00:00 prevents the automatic removal of Receive connector protocol log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxDirectorySize parameter specifies the maximum size of the Receive connector protocol log directory shared by all the Receive connectors that exist on the server. When the maximum directory size is reached, the server deletes the oldest log files first. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ReceiveProtocolLogMaxFileSize parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Receive connector protocol log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxFileSize parameter specifies the maximum size of the Receive connector protocol log files shared by all the Receive connectors that exist on the server. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ReceiveProtocolLogMaxFileSize parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Receive connector protocol log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogPath</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogPath parameter specifies the path of the protocol log directory for all the Receive connectors that exist on the server. The default location is %ExchangeInstallPath%TransportRoles\Logs\Mailbox\ProtocolLog\SmtpReceive. Setting the value of this parameter to $null disables protocol logging for all Receive connectors on the server. However, setting this parameter to $null when the value of the ProtocolLoggingLevel attribute for any Receive connector on the server is Verbose generates event log errors. The preferred method of disabling protocol logging is to use the Set-ReceiveConnector cmdlet to set the ProtocolLoggingLevel to None on each Receive connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxAge parameter specifies the Send connector protocol log file maximum age. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 25 days for this parameter, use 25.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the SendProtocolLogMaxAge parameter to 00:00:00 prevents the automatic removal of Send connector protocol log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxDirectorySize parameter specifies the maximum size of the Send connector protocol log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The minimum value is 1 MB. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the SendProtocolLogMaxFileSize parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Send connector protocol log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxFileSize parameter specifies the maximum size of the Send connector protocol log files shared by all the Send connectors that exist on a server. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB. When you enter a value, qualify the value with one of the following:</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the SendProtocolLogMaxFileSize parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Send connector protocol log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogPath</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogPath parameter specifies the location of protocol log storage for the Send connectors. The default location is %ExchangeInstallPath%TransportRoles\Logs\Mailbox\ProtocolLog\SmtpSend. Setting the value of this parameter to $null disables protocol logging for all Send connectors on the server. However, setting this parameter to $null when the value of the ProtocolLoggingLevel or IntraOrgConnectorProtocolLoggingLevel attribute for any Send connector on the server is Verbose generates event log errors. The preferred method of disabling protocol logging is to use the Set-SendConnector cmdlet to set the ProtocolLoggingLevel parameter to None on each Send connector and to set the IntraOrgConnectorProtocolLoggingLevel parameter to None.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmtpEnableAllTlsVersions</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the ReceiveProtocolLogPath parameter to C:\SMTP Protocol Logs\Receive.log for the Mailbox Transport service on server Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Set-MailboxTransportService Mailbox01 -ReceiveProtocolLogPath "C:\SMTP Protocol Logs\Receive.log"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Mailbox Transport service runs on all Mailbox servers and is responsible for delivering messages to and accepting messages from local mailbox databases using a remote procedure call (RPC). The Mailbox Transport service also uses SMTP to send messages to and from the Transport service that runs on all Mailbox servers for routing messages to their ultimate destinations.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Mailbox Transport service" entries in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/72ed234d-cd25-4070-a5b2-ae5f056cc6a0(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>77b06405-076d-43cf-89b1-aa62b6565d8d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-SystemMessage</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-SystemMessage cmdlet to create customized delivery status notification (DSN) or quota messages, in the specified language, on Mailbox servers or Edge Transport servers.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>SystemMessage</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-SystemMessage</maml:name>
      <command:parameter required="True">
        <maml:name>DsnCode</maml:name>
        <command:parameterValue required="True">EnhancedStatusCode</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Internal</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Language</maml:name>
        <command:parameterValue required="True">CultureInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Text</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>New-SystemMessage</maml:name>
      <command:parameter required="True">
        <maml:name>Language</maml:name>
        <command:parameterValue required="True">CultureInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>QuotaMessageType</maml:name>
        <command:parameterValue required="True">WarningMailboxUnlimitedSize | WarningPublicFolderUnlimitedSize | WarningMailbox | WarningPublicFolder | ProhibitSendMailbox | ProhibitPostPublicFolder | ProhibitSendReceiveMailBox | WarningMailboxMessagesPerFolderCount | ProhibitReceiveMailboxMessagesPerFolderCount | WarningFolderHierarchyChildrenCount | ProhibitReceiveFolderHierarchyChildrenCountCount | WarningMailboxMessagesPerFolderUnlimitedCount | WarningFolderHierarchyChildrenUnlimitedCount | WarningFolderHierarchyDepth | ProhibitReceiveFolderHierarchyDepth | WarningFolderHierarchyDepthUnlimited | WarningFoldersCount | ProhibitReceiveFoldersCount | WarningFoldersCountUnlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Text</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DsnCode</maml:name>
      <maml:description>
        <maml:para>The DsnCode parameter specifies which DSN code the DSN message applies to. This parameter can be a built-in code, or it can be a customized administrator-defined code.</maml:para>
        <maml:para>This parameter can't be used when the QuotaMessageType parameter is specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedStatusCode</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedStatusCode</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Internal</maml:name>
      <maml:description>
        <maml:para>The Internal parameter specifies whether the message is displayed to users inside the Exchange organization. For messages that are only displayed internally, set this parameter to $true. For messages that are only displayed to external users, set this parameter to $false.</maml:para>
        <maml:para>This parameter can't be used when the QuotaMessageType parameter is specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Language</maml:name>
      <maml:description>
        <maml:para>The Language parameter specifies the language of the message. The message can be created in any Exchange-supported language. Languages are specified by using their locale name. For example, the locale name for English is en and the locale name for Japanese is ja. For a complete list of locales, see Supported languages for system messages.</maml:para>
      </maml:description>
      <command:parameterValue required="True">CultureInfo</command:parameterValue>
      <dev:type>
        <maml:name>CultureInfo</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QuotaMessageType</maml:name>
      <maml:description>
        <maml:para>The QuotaMessageType parameter selects the type of quota message to create.</maml:para>
        <maml:para>The QuotaMessageType parameter accepts the following values:</maml:para>
        <maml:para>Quota message types related to mailbox size:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitSendReceiveMailBox Issued when a mailbox exceeds its ProhibitSendReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProhibitSendMailbox Issued when a mailbox exceeds its ProhibitSendQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailbox Issued when a mailbox that has a ProhibitSendQuota limit or a ProhibitSendReceiveQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxUnlimitedSize Issued when a mailbox that doesn't have a ProhibitSendQuota limit or a ProhibitSendReceiveQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to public folder size:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitPostPublicFolder Issued when a public folder exceeds its ProhibitPostQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningPublicFolder Issued when a public folder that has a ProhibitPostQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningPublicFolderUnlimitedSize Issued when a public folder that doesn't have a ProhibitPostQuota limit configured exceeds its IssueWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of messages allowed in a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveMailboxMessagesPerFolderCount Issued when a mailbox exceeds its MailboxMessagesPerFolderCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxMessagesPerFolderCount Issued when a mailbox that has a MailboxMessagesPerFolderCountReceiveQuota limit configured exceeds its MailboxMessagesPerFolderCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningMailboxMessagesPerFolderUnlimitedCount Issued when a mailbox that doesn't have a MailboxMessagesPerFolderCountReceiveQuota limit configured exceeds its MailboxMessagesPerFolderCountWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of subfolders that can be created in a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveFolderHierarchyChildrenCountCount Issued when a mailbox exceeds its FolderHierarchyChildrenCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyChildrenCount Issued when a mailbox that has a FolderHierarchyChildrenCountReceiveQuota limit configured exceeds its FolderHierarchyChildrenCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyChildrenUnlimitedCount Issued when a mailbox that doesn't have a FolderHierarchyChildrenCountReceiveQuota limit configured exceeds its FolderHierarchyChildrenCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFoldersCount Issued when the number of folders in the hierarchy exceeds the FoldersCountWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProhibitReceiveFoldersCount Issued when new public folder creation fails because the public folder hierarchy is too big and has reached the FoldersCountReceiveQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFoldersCountUnlimited Issued when the public folder hierarchy is getting too big and does not have the FoldersCountReceiveQuota limit configured.</maml:para>
        </command:listItem></command:list>
        <maml:para>Quota message types related to the number of levels allowed in the folder hierarchy of a mailbox folder:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>ProhibitReceiveFolderHierarchyDepth Issued when a mailbox exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyDepth Issued when a mailbox that has a FolderHierarchyDepthReceiveQuota limit configured exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>WarningFolderHierarchyDepthUnlimited Issued when a mailbox that doesn't have a FolderHierarchyDepthReceiveQuota limit configured exceeds its FolderHierarchyDepthWarningQuota limit.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter can't be used when the DsnCode parameter is specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">WarningMailboxUnlimitedSize | WarningPublicFolderUnlimitedSize | WarningMailbox | WarningPublicFolder | ProhibitSendMailbox | ProhibitPostPublicFolder | ProhibitSendReceiveMailBox | WarningMailboxMessagesPerFolderCount | ProhibitReceiveMailboxMessagesPerFolderCount | WarningFolderHierarchyChildrenCount | ProhibitReceiveFolderHierarchyChildrenCountCount | WarningMailboxMessagesPerFolderUnlimitedCount | WarningFolderHierarchyChildrenUnlimitedCount | WarningFolderHierarchyDepth | ProhibitReceiveFolderHierarchyDepth | WarningFolderHierarchyDepthUnlimited | WarningFoldersCount | ProhibitReceiveFoldersCount | WarningFoldersCountUnlimited</command:parameterValue>
      <dev:type>
        <maml:name>WarningMailboxUnlimitedSize | WarningPublicFolderUnlimitedSize | WarningMailbox | WarningPublicFolder | ProhibitSendMailbox | ProhibitPostPublicFolder | ProhibitSendReceiveMailBox | WarningMailboxMessagesPerFolderCount | ProhibitReceiveMailboxMessagesPerFolderCount | WarningFolderHierarchyChildrenCount | ProhibitReceiveFolderHierarchyChildrenCountCount | WarningMailboxMessagesPerFolderUnlimitedCount | WarningFolderHierarchyChildrenUnlimitedCount | WarningFolderHierarchyDepth | ProhibitReceiveFolderHierarchyDepth | WarningFolderHierarchyDepthUnlimited | WarningFoldersCount | ProhibitReceiveFoldersCount | WarningFoldersCountUnlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Text</maml:name>
      <maml:description>
        <maml:para>The Text parameter specifies the text of the message displayed to senders or mailbox owners. The text should explain why the message was created and what actions the sender or mailbox owner should take, if any.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a customized DSN message for the DSN code 5.3.5 with the following settings:</maml:para>
        <maml:para />
        <maml:para>This DSN message is only displayed to external users.</maml:para>
        <maml:para>The text for the DSN message is provided for the English locale.</maml:para>
        <maml:para>New-SystemMessage -DsnCode 5.3.5 -Language en -Internal $false -Text "The recipient e-mail system can't process this e-mail message. Please contact your system administrator for more information."</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a customized WarningMailbox quota message. This message is displayed to users who meet the following criteria:</maml:para>
        <maml:para />
        <maml:para>The mailbox has exceeded the warning mailbox limit configured on the mailbox.</maml:para>
        <maml:para>The mailbox is located on a server that uses the English locale.</maml:para>
        <maml:para>New-SystemMessage -QuotaMessageType WarningMailbox -Language en -Text "Your mailbox has exceeded the warning limit specified by your e-mail administrator. Please reduce the size of your mailbox."</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>DSN messages are issued to the sender of e-mail messages that haven't reached their intended recipients. Quota messages are issued to users whose mailboxes or public folders have reached the specific warning, prohibit send, or prohibit receive quotas. Customized DSN and quota messages replace the built-in DSN or quota messages included with Exchange.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "DSNs" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/77b06405-076d-43cf-89b1-aa62b6565d8d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>7d6f8a28-2f23-4139-b44f-2a6d57ee912a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Add-ResubmitRequest</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Add-ResubmitRequest cmdlet to add requests to replay redundant copies of messages from Safety Net after a mailbox database recovery.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Add</command:verb>
    <command:noun>ResubmitRequest</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Add-ResubmitRequest</maml:name>
      <command:parameter required="True">
        <maml:name>Destination</maml:name>
        <command:parameterValue required="True">Guid</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>EndTime</maml:name>
        <command:parameterValue required="True">DateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>StartTime</maml:name>
        <command:parameterValue required="True">DateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CorrelationId</maml:name>
        <command:parameterValue required="True">Guid</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TestOnly</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UnresponsivePrimaryServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Destination</maml:name>
      <maml:description>
        <maml:para>The Destination parameter specifies the GUID of the destination mailbox database. To find the GUID of the mailbox database, run the command: Get-MailboxDatabase -Server &lt;servername&gt; | Format-List Name,GUID.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Guid</command:parameterValue>
      <dev:type>
        <maml:name>Guid</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndTime</maml:name>
      <maml:description>
        <maml:para>The EndTime parameter specifies the delivery time of the latest messages that need to be resubmitted from Safety Net.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
        <maml:para>The date and time specified by the EndTime parameter must be later than the date and time specified by the StartTime parameter. The date and time specified by both parameters must be in the past.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DateTime</command:parameterValue>
      <dev:type>
        <maml:name>DateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>StartTime</maml:name>
      <maml:description>
        <maml:para>The StartTime parameter specifies the delivery time of the oldest messages that need to be resubmitted from Safety Net.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
        <maml:para>The date and time specified by the StartTime parameter must be earlier than the date and time specified by the EndTime parameter. The date and time specified by both parameters must be in the past.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DateTime</command:parameterValue>
      <dev:type>
        <maml:name>DateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CorrelationId</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Guid</command:parameterValue>
      <dev:type>
        <maml:name>Guid</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TestOnly</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UnresponsivePrimaryServers</maml:name>
      <maml:description>
        <maml:para>The UnresponsivePrimaryServers parameter identifies the primary servers that should resubmit the messages from Safety Net as being unavailable so other servers can resubmit the messages. If the primary servers are unavailable, you can designate other servers that hold redundant copies of the messages in Safety Net to resubmit their copies of the messages. However, you must identify the unresponsive primary servers to the other servers using this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example replays the redundant copies of messages delivered from 6:00 PM June 1, 2012 to 5:00 AM June 2 2012 to the recovered mailbox database 5364aeea-6e6b-4055-8258-229b2c6ac9a2.</maml:para>
        <maml:para />
        <maml:para>Add-ResubmitRequest -Destination 5364aeea-6e6b-4055-8258-229b2c6ac9a2 -StartTime "06/01/2012 6:00 PM" -EndTime "06/02/2012 5:00 AM"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/7d6f8a28-2f23-4139-b44f-2a6d57ee912a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>7dca48c4-69a1-4157-a50e-88907dd32d04
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Suspend-Queue</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Suspend-Queue cmdlet to stop processing for a queue on a Mailbox server or an Edge Transport server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Suspend</command:verb>
    <command:noun>Queue</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Suspend-Queue</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">QueueIdentity</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Suspend-Queue</maml:name>
      <command:parameter required="True">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter specifies one or more queues by using OPath filter syntax. The OPath filter includes a queue property name followed by a comparison operator and value, for example, {NextHopDomain -eq "contoso.com"}. For details about filterable queue properties and comparison operators, see Queue filters and Use the Exchange Management Shell to manage queues.</maml:para>
        <maml:para>You can specify multiple criteria by using the and comparison operator. Property values that aren't expressed as an integer must be enclosed in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the queue. Valid input for this parameter uses the syntax Server\Queue or Queue, for example, Mailbox01\contoso.com or Unreachable. For details about queue identity, see the "Queue identity" section in Use the Exchange Management Shell to manage queues.</maml:para>
      </maml:description>
      <command:parameterValue required="True">QueueIdentity</command:parameterValue>
      <dev:type>
        <maml:name>QueueIdentity</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
        <maml:para>You can use the Server parameter and the Filter parameter in the same command. You can't use the Server parameter and the Identity parameter in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example suspends processing on all queues holding messages for delivery to the domain contoso.com and that currently have a status of Retry.</maml:para>
        <maml:para />
        <maml:para>Suspend-Queue -Filter {NextHopDomain -eq "contoso.com" -and Status -eq "Retry"}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example suspends processing on all queues on the server Server1.contoso.com that have more than 100 messages in the queue.</maml:para>
        <maml:para />
        <maml:para>Suspend-Queue -Server Server1.contoso.com -Filter {MessageCount -gt 100}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Suspend-Queue cmdlet stops processing on a queue that has a status of Active or Retry. Messages being processed are delivered, but no additional messages leave the queue. When you use the Identity parameter, the queue is suspended only if the identity matches a single queue. If the identity matches more than one queue, you receive an error. To suspend more than one queue in a single operation, you must use the Filter parameter.</maml:para>
    <maml:para>For instructions on how to resume suspended queues, see Resume-Queue.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/7dca48c4-69a1-4157-a50e-88907dd32d04(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>82d1d389-8d19-4b3c-9e4d-de84b67396b7
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-HostedContentFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Remove-HostedContentFilterRule cmdlet to remove content filter rules in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>HostedContentFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-HostedContentFilterRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the content filter rule that you want to remove. You can use any value that uniquely identifies the rule. For example, you can specify the name, GUID, or distinguished name (DN) of the content filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the content filter rule named Contoso Recipients.</maml:para>
        <maml:para />
        <maml:para>Remove-HostedConnectionFilterRule "Contoso Recipients"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/82d1d389-8d19-4b3c-9e4d-de84b67396b7(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>8328125b-e166-436f-95e6-1afafdbdb89a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-TransportRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-TransportRule cmdlet to modify existing transport rules in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>TransportRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-TransportRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActivationDate</maml:name>
        <command:parameterValue required="True">DateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADComparisonAttribute</maml:name>
        <command:parameterValue required="True">DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADComparisonOperator</maml:name>
        <command:parameterValue required="True">Equal | NotEqual</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AddManagerAsRecipientType</maml:name>
        <command:parameterValue required="True">To | Cc | Bcc | Redirect</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AddToRecipients</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfCcHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfCcHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfRecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfRecipientAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfToCcHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfToCcHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfToHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfToHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyClassification</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyHtmlDisclaimerFallbackAction</maml:name>
        <command:parameterValue required="True">Wrap | Ignore | Reject</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyHtmlDisclaimerLocation</maml:name>
        <command:parameterValue required="True">Append | Prepend</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyHtmlDisclaimerText</maml:name>
        <command:parameterValue required="True">DisclaimerText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyOME</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyRightsProtectionTemplate</maml:name>
        <command:parameterValue required="True">RmsTemplateIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentExtensionMatchesWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentHasExecutableContent</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentIsPasswordProtected</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentIsUnsupported</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentNameMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentProcessingLimitExceeded</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentPropertyContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentSizeOver</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BetweenMemberOf1</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BetweenMemberOf2</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BlindCopyTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comments</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ContentCharacterSetContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CopyTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeleteMessage</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Disconnect</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DlpPolicy</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfADComparisonAttribute</maml:name>
        <command:parameterValue required="True">DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfADComparisonOperator</maml:name>
        <command:parameterValue required="True">Equal | NotEqual</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfCcHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfCcHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfRecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfRecipientAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfToCcHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfToCcHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfToHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfToHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentExtensionMatchesWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentHasExecutableContent</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentIsPasswordProtected</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentIsUnsupported</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentNameMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentProcessingLimitExceeded</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentPropertyContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentSizeOver</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfBetweenMemberOf1</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfBetweenMemberOf2</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfContentCharacterSetContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFrom</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromScope</maml:name>
        <command:parameterValue required="True">InOrganization | NotInOrganization</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHasClassification</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHasNoClassification</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHasSenderOverride</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHeaderContainsMessageHeader</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHeaderContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHeaderMatchesMessageHeader</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHeaderMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfManagerAddresses</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfManagerForEvaluatedUser</maml:name>
        <command:parameterValue required="True">Sender | Recipient</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMessageContainsDataClassifications</maml:name>
        <command:parameterValue required="True">Hashtable[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMessageSizeOver</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMessageTypeMatches</maml:name>
        <command:parameterValue required="True">OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientADAttributeContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientADAttributeMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientInSenderList</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSCLOver</maml:name>
        <command:parameterValue required="True">SclValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderADAttributeContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderADAttributeMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderInRecipientList</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderIpRanges</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderManagementRelationship</maml:name>
        <command:parameterValue required="True">Manager | DirectReport</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentToScope</maml:name>
        <command:parameterValue required="True">InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectOrBodyContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectOrBodyMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfWithImportance</maml:name>
        <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExpiryDate</maml:name>
        <command:parameterValue required="True">DateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>From</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromScope</maml:name>
        <command:parameterValue required="True">InOrganization | NotInOrganization</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GenerateIncidentReport</maml:name>
        <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GenerateNotification</maml:name>
        <command:parameterValue required="True">DisclaimerText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HasClassification</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HasNoClassification</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HasSenderOverride</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HeaderContainsMessageHeader</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HeaderContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HeaderMatchesMessageHeader</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HeaderMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncidentReportContent</maml:name>
        <command:parameterValue required="True">IncidentReportContent[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncidentReportOriginalMail</maml:name>
        <command:parameterValue required="True">IncludeOriginalMail | DoNotIncludeOriginalMail</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogEventText</maml:name>
        <command:parameterValue required="True">EventLogText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ManagerAddresses</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ManagerForEvaluatedUser</maml:name>
        <command:parameterValue required="True">Sender | Recipient</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageContainsDataClassifications</maml:name>
        <command:parameterValue required="True">Hashtable[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageSizeOver</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTypeMatches</maml:name>
        <command:parameterValue required="True">OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mode</maml:name>
        <command:parameterValue required="True">Audit | AuditAndNotify | Enforce</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ModerateMessageByManager</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ModerateMessageByUser</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>NotifySender</maml:name>
        <command:parameterValue required="True">NotifyOnly | RejectMessage | RejectUnlessFalsePositiveOverride | RejectUnlessSilentOverride | RejectUnlessExplicitOverride</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PrependSubject</maml:name>
        <command:parameterValue required="True">SubjectPrefix</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Priority</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Quarantine</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientADAttributeContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientADAttributeMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientInSenderList</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RedirectMessageTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RejectMessageEnhancedStatusCode</maml:name>
        <command:parameterValue required="True">RejectEnhancedStatus</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RejectMessageReasonText</maml:name>
        <command:parameterValue required="True">DsnText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RemoveHeader</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RemoveOME</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RouteMessageOutboundConnector</maml:name>
        <command:parameterValue required="True">OutboundConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RouteMessageOutboundRequireTls</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RuleErrorAction</maml:name>
        <command:parameterValue required="True">Ignore | Defer</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RuleSubType</maml:name>
        <command:parameterValue required="True">None | Dlp</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SCLOver</maml:name>
        <command:parameterValue required="True">SclValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderADAttributeContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderADAttributeMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderAddressLocation</maml:name>
        <command:parameterValue required="True">Header | Envelope | HeaderOrEnvelope</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderInRecipientList</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderIpRanges</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderManagementRelationship</maml:name>
        <command:parameterValue required="True">Manager | DirectReport</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentToScope</maml:name>
        <command:parameterValue required="True">InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SetAuditSeverity</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SetHeaderName</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SetHeaderValue</maml:name>
        <command:parameterValue required="True">HeaderValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SetSCL</maml:name>
        <command:parameterValue required="True">SclValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmtpRejectMessageRejectStatusCode</maml:name>
        <command:parameterValue required="True">RejectStatusCode</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmtpRejectMessageRejectText</maml:name>
        <command:parameterValue required="True">RejectText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>StopRuleProcessing</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectOrBodyContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectOrBodyMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithImportance</maml:name>
        <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the transport rule you want to modify. Use the name or GUID of the transport rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActivationDate</maml:name>
      <maml:description>
        <maml:para>The ActivationDate parameter specifies the date when this rule will become effective. The rule won't take any action on messages until the day you specify for this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DateTime</command:parameterValue>
      <dev:type>
        <maml:name>DateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ADComparisonAttribute</maml:name>
      <maml:description>
        <maml:para>The ADComparisonAttribute parameter specifies an Active Directory attribute to compare between the sender and recipients. When you use this parameter, the specified Active Directory attribute of the sender is compared to the same Active Directory attribute of all the recipients of the message. You can use one of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>When specifying the ADComparisonAttribute parameter, if you don't specify a value for the ADComparisonOperator parameter, the default comparison operator Equal is used.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</command:parameterValue>
      <dev:type>
        <maml:name>DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ADComparisonOperator</maml:name>
      <maml:description>
        <maml:para>The ADComparisonOperator parameter specifies a comparison operator for the ADComparisonAttribute parameter. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Equal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotEqual</maml:para>
        </command:listItem></command:list>
        <maml:para>If you use the ADComparisonOperator parameter, you must also use the ADComparisonAttribute parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Equal | NotEqual</command:parameterValue>
      <dev:type>
        <maml:name>Equal | NotEqual</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddManagerAsRecipientType</maml:name>
      <maml:description>
        <maml:para>The AddManagerAsRecipientType parameter specifies how the message is relayed to the manager of the sender or recipient. You can use any of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>To The manager is added to the recipients in the To line of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Cc The manager is added to the recipients in the carbon copy (Cc) line of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Bcc The manager is added to the recipients in the blind carbon copy (Bcc) line of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Redirect The message is redirected to the manager instead of being delivered to the original recipients.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">To | Cc | Bcc | Redirect</command:parameterValue>
      <dev:type>
        <maml:name>To | Cc | Bcc | Redirect</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddToRecipients</maml:name>
      <maml:description>
        <maml:para>The AddToRecipients parameter specifies one or more additional recipients for the message. Separate multiple recipients with commas. The specified recipients are added as To recipients.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfCcHeader</maml:name>
      <maml:description>
        <maml:para>The AnyOfCcHeader parameter specifies one or more recipients. The rule is applied if any of these recipients are present as a Cc recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfCcHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The AnyOfCcHeaderMemberOf parameter specifies a distribution group. The rule is applied if a member of the specified distribution group is present as a Cc recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfRecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The AnyOfRecipientAddressContainsWords parameter specifies one or more words to check in a recipient address. The rule is applied if a recipient's address includes any of these words.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfRecipientAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The AnyOfRecipientAddressMatchesPatterns parameter specifies one or more regular expressions to match in a recipient address. The rule is applied if any of the recipients' addresses matches the pattern you specify.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfToCcHeader</maml:name>
      <maml:description>
        <maml:para>The AnyOfToCcHeader parameter specifies one or more recipients. The rule is applied if any of the recipients specified are present as a To or Cc recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfToCcHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The AnyOfToCcHeaderMemberOf parameter specifies a distribution group. The rule is applied if a member of the specified distribution group is present as a To or Cc recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfToHeader</maml:name>
      <maml:description>
        <maml:para>The AnyOfToHeader parameter specifies one or more recipients. The rule is applied if any of the specified recipients are present as a To recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfToHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The AnyOfToHeaderMemberOf parameter specifies a distribution group. The rule is applied if a member of the specified distribution group is present as a To recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyClassification</maml:name>
      <maml:description>
        <maml:para>The ApplyClassification parameter specifies a message classification to apply to the message.</maml:para>
        <maml:para>The message classification referred to in this parameter is the custom message classification that you can create in your organization. It isn't related to the data loss prevention (DLP) classification.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyHtmlDisclaimerFallbackAction</maml:name>
      <maml:description>
        <maml:para>The ApplyHtmlDisclaimerFallbackAction parameter specifies an action to fall back to if the HTML disclaimer can't be applied to a message. Valid fallback actions include the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Wrap The original message is wrapped as an attachment in a new message, and the disclaimer is used as the message body for the new message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Ignore The rule is ignored, and the message is delivered without the disclaimer.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Reject The message is rejected.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used with the ApplyHtmlDisclaimerText parameter. If you use the ApplyHtmlDisclaimerText parameter without specifying a value for this parameter, the default fallback action, Wrap, is used.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Wrap | Ignore | Reject</command:parameterValue>
      <dev:type>
        <maml:name>Wrap | Ignore | Reject</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyHtmlDisclaimerLocation</maml:name>
      <maml:description>
        <maml:para>The ApplyHtmlDisclaimerLocation parameter specifies the location within the message where the HTML disclaimer text is inserted. You can use either of the following two values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Append The disclaimer is added to the end of the message body.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Prepend The disclaimer is inserted to the beginning of the message body.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used with the ApplyHtmlDisclaimerText parameter. If you use the ApplyHtmlDisclaimerText parameter without specifying a value for this parameter, the default value, Append, is used.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Append | Prepend</command:parameterValue>
      <dev:type>
        <maml:name>Append | Prepend</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyHtmlDisclaimerText</maml:name>
      <maml:description>
        <maml:para>The ApplyHtmlDisclaimerText parameter specifies disclaimer text to be inserted in the message. Disclaimer text can include HTML tags and inline cascading style sheet (CSS) tags. You can add images using the IMG tag.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DisclaimerText</command:parameterValue>
      <dev:type>
        <maml:name>DisclaimerText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyOME</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The ApplyOME parameter specifies that a message and its attachments will be encrypted if the message matches the conditions of this rule.</maml:para>
        <maml:para>Valid input for this parameter is $true or $false. The default is $false.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyRightsProtectionTemplate</maml:name>
      <maml:description>
        <maml:para>The ApplyRightsProtectionTemplate parameter specifies the name of a rights management service (RMS) template to apply to the message. This action adds rights protection to the messages that meet the conditions of this rule. To use this action, an Active Directory Rights Management Services (AD RMS) server should exist in the topology or the organization should be configured to use the ILS service.</maml:para>
        <maml:para>For more information, see Transport protection rules.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RmsTemplateIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RmsTemplateIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentContainsWords</maml:name>
      <maml:description>
        <maml:para>The AttachmentContainsWords parameter specifies one or more words to check in attachments. Only supported attachment types are checked. The rule is applied if any of the attachments contain any of the words you specify.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentExtensionMatchesWords</maml:name>
      <maml:description>
        <maml:para>The AttachmentExtensionMatchesWords parameter specifies one or more word patterns to check in attachment extensions. The rule is applied if the extensions of any of the attachments match the word patterns you specify.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentHasExecutableContent</maml:name>
      <maml:description>
        <maml:para>The AttachmentHasExecutableContent parameter specifies whether the rule is applied when any attachments in the message contain executable content. If you set this parameter to $true, the rule is applied if any of the attachments contains executable content.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentIsPasswordProtected</maml:name>
      <maml:description>
        <maml:para>The AttachmentIsPasswordProtected parameter specifies whether the attachment is a password protected file whose contents can't be inspected. For example, if a password protected ZIP file is in a message, this condition will be met. The rule is applied if any attachment is password protected.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentIsUnsupported</maml:name>
      <maml:description>
        <maml:para>The AttachmentIsUnsupported parameter specifies whether the rule is applied when any attachments in the message are of an unsupported type. Unsupported attachments are attachments for which an IFilter isn't installed on the servers. If you set this parameter to $true, the rule is applied if any of the attachments is an unsupported type.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The AttachmentMatchesPatterns parameter specifies one or more regular expressions to match in message attachment content. Only supported attachment types are checked for the specified pattern.</maml:para>
        <maml:para>Only the first 150 kilobytes (KB) of the attachment is scanned when trying to match a pattern.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentNameMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The AttachmentNameMatchesPatterns parameter specifies one or more word patterns to check in attachment names. The rule is applied if the name of any attachment matches the patterns you specify.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentProcessingLimitExceeded</maml:name>
      <maml:description>
        <maml:para>The AttachmentProcessingLimitExceeded parameter specifies whether the scanning of attachments in the message didn't complete because the processing exceeded built-in limits. This condition is used to create rules that work together with other attachment processing rules and gives you the ability to handle messages whose content couldn't be fully scanned.</maml:para>
        <maml:para>Valid values are $true and $false.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentPropertyContainsWords</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentSizeOver</maml:name>
      <maml:description>
        <maml:para>The AttachmentSizeOver parameter specifies an attachment size. The rule is applied if the size of any of the attachments exceeds the specified size.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BetweenMemberOf1</maml:name>
      <maml:description>
        <maml:para>The BetweenMemberOf1 parameter specifies a distribution group and must be used together with the BetweenMemberOf2 parameter. The rule is applied if the message is sent between members of the distribution groups specified in these parameters.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BetweenMemberOf2</maml:name>
      <maml:description>
        <maml:para>The BetweenMemberOf2 parameter specifies a distribution group and must be used together with the BetweenMemberOf1 parameter. The rule is applied if the message is sent between members of the distribution groups specified in these parameters.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BlindCopyTo</maml:name>
      <maml:description>
        <maml:para>The BlindCopyTo parameter specifies one or more recipients to add to the message as Bcc recipients.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comments</maml:name>
      <maml:description>
        <maml:para>The Comments parameter specifies informative comments for the transport rule, such as what the rule is used for or how it has changed over time. The length of the comment can't exceed 1024 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ContentCharacterSetContainsWords</maml:name>
      <maml:description>
        <maml:para>The ContentCharacterSetContainsWords parameter specifies one or more character set names to check for in the message. The rule is applied if the message contains any of the character sets specified.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CopyTo</maml:name>
      <maml:description>
        <maml:para>The CopyTo parameter specifies one or more recipients to add to the message as Cc recipients.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeleteMessage</maml:name>
      <maml:description>
        <maml:para>The DeleteMessage parameter specifies that the rule deletes any message that matches the conditions specified.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Disconnect</maml:name>
      <maml:description>
        <maml:para>The Disconnect parameter specifies whether the rules agent disconnects the SMTP session.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DlpPolicy</maml:name>
      <maml:description>
        <maml:para>The DlpPolicy parameter specifies the data loss prevention (DLP) policy associated with this rule. Each DLP policy is enforced using a set of transport rules. To learn more about DLP, see Data loss prevention.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfADComparisonAttribute</maml:name>
      <maml:description>
        <maml:para>The ExceptIfADComparisonAttribute parameter specifies an Active Directory attribute to compare between the sender and recipients. When you use this parameter, the specified Active Directory attribute of the sender is compared to the same Active Directory attribute of all the recipients of the message. You can use one of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>When specifying the ExceptIfADComparisonAttribute parameter, if you don't specify a value for the ExceptIfADComparisonOperator parameter, the default comparison operator Equal is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</command:parameterValue>
      <dev:type>
        <maml:name>DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfADComparisonOperator</maml:name>
      <maml:description>
        <maml:para>The ExceptIfADComparisonOperator parameter specifies a comparison operator for the ExceptIfADComparisonAttribute parameter. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Equal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotEqual</maml:para>
        </command:listItem></command:list>
        <maml:para>If you use the ExceptIfADComparisonOperator parameter, you must also use the ExceptIfADComparisonAttribute parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Equal | NotEqual</command:parameterValue>
      <dev:type>
        <maml:name>Equal | NotEqual</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfCcHeader</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfCcHeader parameter specifies one or more recipients. The rule isn't applied if any of these recipients are present as a Cc recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfCcHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfCcHeaderMemberOf parameter specifies a distribution group. The rule isn't applied if a member of the specified distribution group is present as a Cc recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfRecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfRecipientAddressContainsWords parameter specifies one or more words to check in a recipient address. The rule isn't applied if a recipient's address includes any of these words.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfRecipientAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfRecipientAddressMatchesPatterns parameter specifies one or more regular expressions to match in a recipient address. The rule isn't applied if any of the recipient addresses matches the pattern you specify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfToCcHeader</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfToCcHeader parameter specifies one or more recipients. The rule isn't applied if any of the recipients specified are present as a To or Cc recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfToCcHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfToCcHeaderMemberOf parameter specifies a distribution group. The rule isn't applied if a member of the specified distribution group is present as a To or Cc recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfToHeader</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfToHeader parameter specifies one or more recipients. The rule isn't applied if any of the specified recipients are present as a To recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfToHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfToHeaderMemberOf parameter specifies a distribution group. The rule isn't applied if a member of the specified distribution group is present as a To recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentContainsWords parameter specifies one or more words to check in attachments. Only supported attachment types are checked. The rule isn't applied if any of the attachments contain any of the words you specify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentExtensionMatchesWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentExtensionMatchesWords parameter specifies one or more word patterns to check in attachment extensions. The rule isn't applied if the extensions of any of the attachments match the word patterns you specify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentHasExecutableContent</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentHasExecutableContent parameter specifies whether the rule is applied when any attachments in the message contain executable content. If you set this parameter to $true, the rule isn't applied if any of the attachments contains executable content.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentIsPasswordProtected</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentIsPasswordProtected parameter specifies whether the attachment is a password protected file whose contents can't be inspected. For example, if a password protected ZIP file is in a message, this exception will be met. The rule isn't applied if any attachment is password protected.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentIsUnsupported</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentIsUnsupported parameter specifies whether the rule is applied when any attachments in the message are of an unsupported type. Unsupported attachments are attachments for which an IFilter isn't installed on your servers. If you set this parameter to $true the rule isn't applied if any of the attachments is an unsupported type.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentMatchesPatterns parameter specifies one or more regular expressions to match in message attachment content. Only supported attachment types are checked for the specified pattern.</maml:para>
        <maml:para>Only the first 150 KB of the attachment is scanned when trying to match a pattern.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentNameMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentNameMatchesPatterns parameter specifies one or more word patterns to check in attachment names. The rule isn't applied if the name of any attachment matches the patterns you specify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentProcessingLimitExceeded</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentProcessingLimitExceeded parameter specifies whether the scanning of attachments in the message didn't complete because the processing exceeded built-in limits. This condition is used to create rules that work together with other attachment processing rules and gives you the ability to handle messages whose content couldn't be fully scanned.</maml:para>
        <maml:para>Valid values are $true and $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentPropertyContainsWords</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentSizeOver</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentSizeOver parameter specifies an attachment size. The rule isn't applied if the size of any of the attachments exceeds the specified size.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfBetweenMemberOf1</maml:name>
      <maml:description>
        <maml:para>The ExceptIfBetweenMemberOf1 parameter specifies a distribution group and must be used together with the ExceptIfBetweenMemberOf2 parameter. The rule isn't applied if the message is sent between members of the distribution groups specified in these parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfBetweenMemberOf2</maml:name>
      <maml:description>
        <maml:para>The ExceptIfBetweenMemberOf2 parameter specifies a distribution group and must be used together with the ExceptIfBetweenMemberOf1 parameter. The rule isn't applied if the message is sent between members of the distribution groups specified in these parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfContentCharacterSetContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfContentCharacterSetContainsWords parameter specifies one or more character set names to check for in the message. The rule isn't applied if the message contains any of the character sets specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFrom</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFrom parameter specifies the sender. The rule isn't applied to messages received from this sender.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFromAddressContainsWords parameters specifies one or more words to check for in the From address. The rule isn't applied if the sender's address includes any of these words.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFromAddressMatchesPatterns parameter specifies one or more regular expressions to match in the sender's address. The rule isn't applied if the sender's address matches the pattern you specify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFromMemberOf parameter specifies a distribution group. The rule isn't applied if the sender of the message is a member of this distribution group.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromScope</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFromScope parameter specifies whether the sender is inside or outside your organization. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>InOrganization</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotInOrganization</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">InOrganization | NotInOrganization</command:parameterValue>
      <dev:type>
        <maml:name>InOrganization | NotInOrganization</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHasClassification</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHasClassification parameter specifies a message classification. The rule isn't applied to messages that have the specified classification.</maml:para>
        <maml:para>The message classification referred to in this parameter is the custom message classification that you can create in your organization. It isn't related to the DLP classification.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHasNoClassification</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHasNoClassification parameter specifies that the rule isn't applied to messages that don't have a message classification.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHasSenderOverride</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHasSenderOverride parameter specifies the rule to check if the sender has chosen to override a DLP policy. Set this parameter to $true to prevent this rule from applying to messages where the sender took action to override a DLP policy restriction.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHeaderContainsMessageHeader</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHeaderContainsMessageHeader parameter specifies the SMTP message header to inspect for specific words or patterns. This parameter is used together with the ExceptIfHeaderContainsWords parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHeaderContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHeaderContainsWords parameter specifies one or more words to look for in the message header specified in the ExceptIfHeaderContainsMessageHeader parameter. The rule isn't applied to messages where the header value of the specified header matches any of the words specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHeaderMatchesMessageHeader</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHeaderMatchesMessageHeader parameter specifies an SMTP message header to inspect. This parameter is used together with the ExceptIfHeaderMatchesPatterns parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHeaderMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHeaderMatchesPatterns parameter specifies a pattern to match in the header specified in the ExceptIfHeaderMatchesMessageHeader parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfManagerAddresses</maml:name>
      <maml:description>
        <maml:para>The ExceptIfManagerAddresses parameter specifies a recipient. The rule isn't applied to messages where the specified recipient is the manager of the sender or the recipient. Whether it's the manager for the sender or the recipient is defined in the ExceptIfManagerForEvaluatedUser parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfManagerForEvaluatedUser</maml:name>
      <maml:description>
        <maml:para>The ExceptIfManagerForEvaluatedUser parameter specifies whether the sender or the recipient's manager should be evaluated. The specified user's manager attribute is compared with users specified in the ExceptIfManagerAddresses parameter. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Recipient</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Sender</maml:para>
        </command:listItem></command:list>
        <maml:para>Use this parameter together with the ExceptIfManagerAddresses parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Sender | Recipient</command:parameterValue>
      <dev:type>
        <maml:name>Sender | Recipient</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMessageContainsDataClassifications</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMessageContainsDataClassifications parameter specifies the sensitive information types to look for in the message body and any of the attachments. For a list of sensitive information types available, see Sensitive Information Types Inventory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Hashtable[]</command:parameterValue>
      <dev:type>
        <maml:name>Hashtable[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMessageSizeOver</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMessageSizeOver parameter specifies a message size. The rule isn't applied to any messages that exceed the message size you specify for this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMessageTypeMatches</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMessageTypeMatches parameter specifies a message type. The rule isn't applied to any messages that match the message type you specify. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>OOF Auto-reply messages configured by the user</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AutoForward Messages automatically forwarded to an alternative recipient</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Encrypted Encrypted messages</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Calendaring Meeting requests and responses</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PermissionControlled Messages that have specific permissions configured</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Voicemail Voice mail messages forwarded by Unified Messaging service</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Signed Digitally signed messages</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ApprovalRequest Moderation request messages sent to moderators</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReadReceipt Read receipts</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</command:parameterValue>
      <dev:type>
        <maml:name>OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientADAttributeContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientADAttributeContainsWords parameter specifies one or more words to check for in specific Active Directory attributes of the recipient. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the words. For example, to look for the word Sales in the Department attribute, set this parameter to Department:Sales. If you want to specify multiple values for multiple attributes, separate them with commas. The rule isn't applied if any of the specified attributes have the value specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientADAttributeMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientADAttributeMatchesPatterns parameter specifies one or more patterns to check for in the specified Active Directory attribute of the recipient. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the pattern. If you want to specify multiple patterns for multiple attributes, separate them with commas. The rule isn't applied if the values of any of the specified attributes match the specified patterns for that attribute.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientAddressContainsWords parameter specifies words to check for in the recipient address.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientAddressMatchesPatterns parameter specifies one or more text patterns to match in the recipient address.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientDomainIs parameter specifies the recipient's domain. The rule isn't applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientInSenderList</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The ExceptIfRecipientInSenderList parameter specifies an exception when a recipient is defined in a supervision list entry on the sender's mailbox. Supervision list entries perform the following functions:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>They specify individual exceptions for the user in the closed campus supervision policy.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>They identify the user as a victim in the anti-bullying policy.</maml:para>
        </command:listItem></command:list>
        <maml:para>To view the supervision list entries that are configured on a user's mailbox, run the Get-SupervisionListEntry command and specify the user's mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSCLOver</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSCLOver parameter specifies a spam confidence level (SCL) value. The rule isn't applied to messages with an SCL equal to or higher than the value specified. Valid SCL values are integers from 0 through 9, and -1. The value -1 specifies that the message is from a trusted source.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SclValue</command:parameterValue>
      <dev:type>
        <maml:name>SclValue</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderADAttributeContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSenderADAttributeContainsWords parameter specifies one or more words to check for in specific Active Directory attributes of the sender. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the words. For example, to look for the word Sales in the Department attribute, set this parameter to Department:Sales. If you want to specify multiple values for multiple attributes, separate them with commas. The rule isn't applied if any of the specified attributes have the value specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderADAttributeMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSenderADAttributeMatchesPatterns parameter specifies one or more patterns to check for in the specified Active Directory attribute of the sender. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the pattern. If you want to specify multiple patterns for multiple attributes, separate them with commas. The rule isn't applied if the values of any of the specified attributes match the specified patterns for that attribute.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderDomainIs</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSenderDomainIs parameter specifies the sender's domain. The rule isn't applied to messages received from senders whose email addresses are in the specified domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderInRecipientList</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The ExceptIfSenderInRecipientList parameter specifies an exception when the sender is defined in a supervision list entry on a recipient's mailbox. Supervision list entries perform the following functions:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>They specify individual exceptions for the user in the closed campus supervision policy.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>They identify the user as a victim in the anti-bullying policy.</maml:para>
        </command:listItem></command:list>
        <maml:para>To view the supervision list entries that are configured on a user's mailbox, run the Get-SupervisionListEntry command and specify the user's mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderIpRanges</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSenderIpRanges parameter specifies the IP ranges to compare with the sender's IP address. The rule isn't applied if the IP address of the sender falls within one of the IP ranges specified in this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderManagementRelationship</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSenderManagementRelationship parameter specifies a relationship between the sender and the recipient. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Manager The rule isn't applied if the sender is the manager of the recipient.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DirectReport The rule isn't applied if the sender is a direct report of the recipient.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Manager | DirectReport</command:parameterValue>
      <dev:type>
        <maml:name>Manager | DirectReport</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentTo</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentTo parameter specifies a recipient. The rule isn't applied to messages sent to the specified recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentToMemberOf parameter specifies a distribution group. The rule isn't applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no exception is made.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentToScope</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentToScope parameter specifies whether the message is sent to internal, external, or partner recipients. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>InOrganization The recipients are internal to your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotInOrganization The recipients are outside your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ExternalPartner The recipients are in a partner organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ExternalNonPartner The recipients are external to your organization which isn't a partner organization.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</command:parameterValue>
      <dev:type>
        <maml:name>InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectContainsWords parameter specifies words to look for in the message subject.</maml:para>
        <maml:para>You can specify one or more words or phrases. When specifying more than one word or phrase, each word or phrase should be separated by a comma (,). When specifying a phrase that contains one or more spaces, you must enclose the phrase in quotation marks ("), for example:</maml:para>
        <maml:para>Word1,"Phrase with spaces",word2.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectMatchesPatterns parameter specifies text patterns to check the message subject for.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectOrBodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectOrBodyContainsWords parameter specifies words to look for in the message subject and body. The rule isn't applied if any of the words or phrases specified is found in the message subject or body.</maml:para>
        <maml:para>You can specify one or more words or phrases. When specifying more than one word or phrase, each word or phrase should be separated by a comma (,). When specifying a phrase with one or more spaces, you must enclose the phrase in quotation marks ("), for example:</maml:para>
        <maml:para>Word1,"Phrase with spaces",word2.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectOrBodyMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectOrBodyMatchesPatterns parameter specifies text patterns to look for in the message subject and body. The rule isn't applied if the word specified is found in the message subject or body.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfWithImportance</maml:name>
      <maml:description>
        <maml:para>The ExceptIfWithImportance parameter specifies message importance. The rule isn't applied to messages matching the specified importance. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>High</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Low</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Normal | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExpiryDate</maml:name>
      <maml:description>
        <maml:para>The ExpiryDate parameter specifies the date when this rule will stop processing. The rule won't take any action on messages past the date you specify for this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DateTime</command:parameterValue>
      <dev:type>
        <maml:name>DateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>From</maml:name>
      <maml:description>
        <maml:para>The From parameter specifies the sender. The rule is applied to messages received from this sender.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The FromAddressContainsWords parameter specifies one or more words to check for in the From address. The rule is applied if the sender's address includes any of these words.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The FromAddressMatchesPatterns parameter specifies one or more regular expressions to match in the sender's address. The rule is applied if the sender's address matches the pattern you specify.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromMemberOf</maml:name>
      <maml:description>
        <maml:para>The FromMemberOf parameter specifies a distribution group. The rule is applied if the sender of the message is a member of this distribution group.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromScope</maml:name>
      <maml:description>
        <maml:para>The FromScope parameter specifies whether the sender is inside or outside your organization. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>InOrganization</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotInOrganization</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InOrganization | NotInOrganization</command:parameterValue>
      <dev:type>
        <maml:name>InOrganization | NotInOrganization</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GenerateIncidentReport</maml:name>
      <maml:description>
        <maml:para>The GenerateIncidentReport parameter specifies the recipient to whom incident reports will be sent. An incident report is generated for messages that violate a DLP policy in your organization.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GenerateNotification</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DisclaimerText</command:parameterValue>
      <dev:type>
        <maml:name>DisclaimerText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HasClassification</maml:name>
      <maml:description>
        <maml:para>The HasClassification parameter specifies a message classification. The rule is applied to messages that have the specified classification.</maml:para>
        <maml:para>The message classification referred to in this parameter is the custom message classification that you can create in your organization. It isn't related to the DLP classification.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HasNoClassification</maml:name>
      <maml:description>
        <maml:para>The HasNoClassification parameter specifies whether the rule is applied to messages that don't have a message classification.</maml:para>
        <maml:para>If you set this parameter to $true, the rule is applied to all messages that don't have a message classification.</maml:para>
        <maml:para>If you set this parameter to $false, the rule is applied to all messages that have one or more message classifications.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HasSenderOverride</maml:name>
      <maml:description>
        <maml:para>The HasSenderOverride parameter specifies the rule to check if the sender has chosen to override a DLP policy. Set this parameter to $true to apply this rule to messages where the sender took action to override a DLP policy restriction.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HeaderContainsMessageHeader</maml:name>
      <maml:description>
        <maml:para>The HeaderContainsMessageHeader parameter specifies the SMTP message header to inspect for specific words or patterns. This parameter is used together with the HeaderContainsWords parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HeaderContainsWords</maml:name>
      <maml:description>
        <maml:para>The HeaderContainsWords parameter specifies one or more words to look for in the message header specified in the HeaderContainsMessageHeader parameter. The rule is applied to messages where the header value of the specified header matches any of the words specified.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HeaderMatchesMessageHeader</maml:name>
      <maml:description>
        <maml:para>The HeaderMatchesMessageHeader parameter specifies an SMTP message header to inspect. This parameter is used together with the HeaderMatchesPatterns parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HeaderMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The HeaderMatchesPatterns parameter specifies a pattern to match in the header specified in the HeaderMatchesMessageHeader parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncidentReportContent</maml:name>
      <maml:description>
        <maml:para>The IncidentReportContent parameter specifies the message properties that are included in incident reports. This parameter is used together with the GenerateIncidentReport parameter.</maml:para>
        <maml:para>The valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Sender Includes the sender of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Recipients Includes the recipients in the To: box of the message. Only the first 10 recipients are displayed in the incident report. If there are more than 10 recipients, the remaining number of recipients will be displayed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Subject Includes the message subject.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CC Includes the recipients in the Cc: box of the message. Only the first 10 recipients are displayed in the incident report. If there are more than 10 recipients, the remaining number of recipients will be displayed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>BCC Includes the recipients in the Bcc: box of the message. Only the first 10 recipients are displayed in the incident report. If there are more than 10 recipients, the remaining number of recipients will be displayed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Severity Includes the audit severity of the rule that was triggered. If the message was processed by more than one rule, the highest severity is displayed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Override Includes the override if the sender has chosen to override a PolicyTip. If the sender has provided a justification, the first 100 characters of the justification is also included.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RuleDetections Includes the list of rules that the message triggered.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FalsePositive Includes the false positive if the sender marked the message as a false positive for a PolicyTip.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DataClassifications Includes the list of sensitive information types detected in the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>IdMatch Includes the sensitive information type that is detected, the exact matched content from the message, and the 150 characters before and after the matched sensitive information.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AttachOriginalMail Includes the entire original message.</maml:para>
        </command:listItem></command:list>
        <maml:para>The message ID is always included in the incident report.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">IncidentReportContent[]</command:parameterValue>
      <dev:type>
        <maml:name>IncidentReportContent[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncidentReportOriginalMail</maml:name>
      <maml:description>
        <maml:para>The IncidentReportOriginalMail parameter specifies whether to include the original message with the incident report. This parameter is used together with the GenerateIncidentReport parameter. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>IncludeOriginalMail</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DoNotIncludeOriginalMail</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is DoNotIncludeOriginalMail.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
        <maml:para>The functionality of this parameter is now managed by the IncidentReportContent parameter, and this parameter will be deprecated in the future. Adding the value AttachOriginalMail to the IncidentReportContent parameter is equivalent to setting this parameter to IncludeOriginalMail value. Even though this parameter is still functional, we recommend you use the IncidentReportContent parameter instead.</maml:para>
      </maml:description>
      <command:parameterValue required="True">IncludeOriginalMail | DoNotIncludeOriginalMail</command:parameterValue>
      <dev:type>
        <maml:name>IncludeOriginalMail | DoNotIncludeOriginalMail</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogEventText</maml:name>
      <maml:description>
        <maml:para>The LogEventText parameter specifies a message string to add to the event log entry for this rule.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EventLogText</command:parameterValue>
      <dev:type>
        <maml:name>EventLogText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ManagerAddresses</maml:name>
      <maml:description>
        <maml:para>The ManagerAddresses parameter specifies a recipient. The rule is applied to messages where the specified recipient is the manager of the sender or the recipient. Whether it's the manager for the sender or the recipient is defined in the ManagerForEvaluatedUser parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ManagerForEvaluatedUser</maml:name>
      <maml:description>
        <maml:para>The ManagerForEvaluatedUser parameter specifies whether the sender or the recipient's manager should be evaluated. The specified user's manager attribute is compared with users specified in the ManagerAddresses parameter. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Recipient</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Sender</maml:para>
        </command:listItem></command:list>
        <maml:para>Use this parameter together with the ManagerAddresses parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Sender | Recipient</command:parameterValue>
      <dev:type>
        <maml:name>Sender | Recipient</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageContainsDataClassifications</maml:name>
      <maml:description>
        <maml:para>The MessageContainsDataClassifications parameter specifies the sensitive information types to look for in the message body and any of the attachments. For a list of sensitive information types available, see Sensitive Information Types Inventory.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Hashtable[]</command:parameterValue>
      <dev:type>
        <maml:name>Hashtable[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageSizeOver</maml:name>
      <maml:description>
        <maml:para>The MessageSizeOver parameter specifies a message size. The rule is applied to all messages that exceed the message size you specify for this parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTypeMatches</maml:name>
      <maml:description>
        <maml:para>The MessageTypeMatches parameter specifies a message type. The rule is applied to all messages that match the message type you specify. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>OOF Auto-reply messages configured by the user</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AutoForward Messages automatically forwarded to an alternative recipient</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Encrypted Encrypted messages</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Calendaring Meeting requests and responses</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PermissionControlled Messages that have specific permissions configured</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Voicemail Voice mail messages forwarded by Unified Messaging service</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Signed Digitally signed messages</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ApprovalRequest Moderation request messages sent to moderators</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReadReceipt Read receipts</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</command:parameterValue>
      <dev:type>
        <maml:name>OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mode</maml:name>
      <maml:description>
        <maml:para>The Mode parameter specifies in which mode this rule will operate. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Audit The rule is turned on, and what would have happened if the rule was enforced is logged in message tracking logs. Exchange doesn't take any action that impacts the delivery of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AuditAndNotify The rule is turned on, and it operates the same way it would in Audit mode, but notifications are also enabled.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Enforce The rule is turned on, and all actions specified in the rule are taken.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is Enforce.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Audit | AuditAndNotify | Enforce</command:parameterValue>
      <dev:type>
        <maml:name>Audit | AuditAndNotify | Enforce</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ModerateMessageByManager</maml:name>
      <maml:description>
        <maml:para>The ModerateMessageByManager parameter specifies whether the message should be forwarded to the sender's manager for approval. To enable moderation by the sender's manager, set the value to $true.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ModerateMessageByUser</maml:name>
      <maml:description>
        <maml:para>The ModerateMessageByUser parameter specifies a recipient to forward the message to for approval.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the display name of the transport rule to be created. The length of the name can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>NotifySender</maml:name>
      <maml:description>
        <maml:para>The NotifySender parameter specifies how the sender of a message that goes against a DLP policy is notified. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>NotifyOnly Sender is notified, but the message is delivered normally.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RejectMessage Message is rejected, and the sender is notified.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RejectUnlessFalsePositiveOverride Message is rejected unless it's marked as a false positive by the sender.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RejectUnlessSilentOverride Message is rejected unless the sender has chosen to override the policy restriction.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RejectUnlessExplicitOverride This is the same as RejectUnlessSilentOverride, but the sender can also provide a justification for overriding the policy restriction.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify any value other than NotifyOnly, you can provide a specific rejection status code and reason using the RejectMessageEnhancedStatusCode and RejectMessageReasonText parameters.</maml:para>
        <maml:para>This action is used together with the MessageContainsDataClassifications condition. If you use this parameter, you must also specify the sensitive information types you want to check against using the MessageContainsDataClassifications parameter.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">NotifyOnly | RejectMessage | RejectUnlessFalsePositiveOverride | RejectUnlessSilentOverride | RejectUnlessExplicitOverride</command:parameterValue>
      <dev:type>
        <maml:name>NotifyOnly | RejectMessage | RejectUnlessFalsePositiveOverride | RejectUnlessSilentOverride | RejectUnlessExplicitOverride</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PrependSubject</maml:name>
      <maml:description>
        <maml:para>The PrependSubject parameter specifies a word or phrase to add to the beginning of the message subject.</maml:para>
        <maml:para>The rule will add the text as you specify in this parameter without adding spaces or other characters to separate it from the original subject. Consider ending the value you specify in this parameter with a colon (:) and a space, or at least a space, to separate it from the original subject.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SubjectPrefix</command:parameterValue>
      <dev:type>
        <maml:name>SubjectPrefix</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Priority</maml:name>
      <maml:description>
        <maml:para>The Priority parameter specifies the priority for this transport rule. Rules with a lower priority value are processed first. If you modify the priority of the rule, the position of the rule in the rule list changes to match the priority that you specified, and the Transport Rules agent increments all rules with a higher priority value. The value of this parameter must be greater than or equal to 0, and must be one less than the total number of transport rules in your organization. For example, if you configured 8 transport rules, you can set this parameter to any value from 0 through 7.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Quarantine</maml:name>
      <maml:description>
        <maml:para>The Quarantine parameter specifies whether the rules agent delivers the message to the quarantine mailbox specified in the Content Filtering configuration.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientADAttributeContainsWords</maml:name>
      <maml:description>
        <maml:para>The RecipientADAttributeContainsWords parameter specifies one or more words to check for in specific Active Directory attributes of the recipient. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the words. For example, to look for the word Sales in the Department attribute, set this parameter to Department:Sales. If you want to specify multiple values for multiple attributes, separate them with commas. The rule will be applied if any of the specified attributes have the value specified.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientADAttributeMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The RecipientADAttributeMatchesPatterns parameter specifies one or more patterns to check for in the specified Active Directory attribute of the recipient. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the pattern. If you want to specify multiple patterns for multiple attributes, separate them with commas. The rule will be applied if the values of any of the specified attributes match the specified patterns for that attribute.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The RecipientAddressContainsWords parameter specifies one or more words to check for in the recipient's email address.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The RecipientAddressMatchesPatterns parameter specifies a pattern to check the recipient address for.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The RecipientDomainIs parameter specifies the recipient's domain. The rule is applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientInSenderList</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The RecipientInSenderList parameter specifies the condition when a recipient is defined in a supervision list entry on the sender's mailbox. Supervision list entries perform the following functions:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>They specify individual exceptions for the user in the closed campus supervision policy.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>They identify the user as a victim in the anti-bullying policy.</maml:para>
        </command:listItem></command:list>
        <maml:para>To view the supervision list entries that are configured on a user's mailbox, run the Get-SupervisionListEntry command and specify the user's mailbox.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RedirectMessageTo</maml:name>
      <maml:description>
        <maml:para>The RedirectMessageTo parameter specifies that the rule redirects the message to the specified recipient.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RejectMessageEnhancedStatusCode</maml:name>
      <maml:description>
        <maml:para>The RejectMessageEnhancedStatusCode parameter specifies an enhanced status code to provide when rejecting messages. Valid values are 5.7.1 or between 5.7.10 and 5.7.999.</maml:para>
        <maml:para>The transport rule can add a custom rejection message. To further customize the delivery status notification (DSN), you need to create a custom DSN message using the New-SystemMessage cmdlet.</maml:para>
        <maml:para>If an enhanced status code isn't specified, and only the RejectMessageReasonText parameter is used, the enhanced status code 5.7.1 is used.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RejectEnhancedStatus</command:parameterValue>
      <dev:type>
        <maml:name>RejectEnhancedStatus</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RejectMessageReasonText</maml:name>
      <maml:description>
        <maml:para>The RejectMessageReasonText parameter specifies a reason that explains why the message was rejected.</maml:para>
        <maml:para>The transport rule can add a custom rejection message. To further customize the DSN, you need to create a custom DSN message using the New-SystemMessage cmdlet.</maml:para>
        <maml:para>If a RejectMessageReasonText parameter value isn't specified, and an enhanced status code is specified by using the RejectMessageEnhancedStatusCode parameter, the default reason text "Delivery not authorized, message refused" is used.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DsnText</command:parameterValue>
      <dev:type>
        <maml:name>DsnText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RemoveHeader</maml:name>
      <maml:description>
        <maml:para>The RemoveHeader parameter specifies an SMTP header name to be removed from the message.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RemoveOME</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The RemoveOME parameter specifies that a message and its attachments will be decrypted if they match the identified transport rule.</maml:para>
        <maml:para>The default is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RouteMessageOutboundConnector</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The RouteMessageOutboundConnector parameter specifies the connector to use for routing this message.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OutboundConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OutboundConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RouteMessageOutboundRequireTls</maml:name>
      <maml:description>
        <maml:para>The RouteMessageOutboundRequireTls parameter specifies that Transport Layer Security (TLS) encryption is required when routing this message outside your organization. Set this parameter to $true to require TLS.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RuleErrorAction</maml:name>
      <maml:description>
        <maml:para>The RuleErrorAction parameter specifies how the message should be handled if the rule processing can't be completed. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Ignore The message is sent without completing the rule processing.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Defer The message is deferred so the rules engine can attempt to process the message again.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is Ignore.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Ignore | Defer</command:parameterValue>
      <dev:type>
        <maml:name>Ignore | Defer</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RuleSubType</maml:name>
      <maml:description>
        <maml:para>The RuleSubType parameter specifies the type of this transport rule. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Dlp Specifies that this rule is associated with a DLP policy.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>None Specifies that this is a regular transport rule.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">None | Dlp</command:parameterValue>
      <dev:type>
        <maml:name>None | Dlp</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SCLOver</maml:name>
      <maml:description>
        <maml:para>The SCLOver parameter specifies an SCL value. The rule is applied to messages with an SCL equal to or higher than the value specified. Valid SCL values are integers from 0 through 9, and -1. The value -1 specifies that the message is from a trusted source.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SclValue</command:parameterValue>
      <dev:type>
        <maml:name>SclValue</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderADAttributeContainsWords</maml:name>
      <maml:description>
        <maml:para>The SenderADAttributeContainsWords parameter specifies one or more words to check for in specific Active Directory attributes of the sender. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the words. For example, to look for the word Sales in the Department attribute, set this parameter to Department:Sales. If you want to specify multiple values for multiple attributes, separate them with commas. The rule will be applied if any of the specified attributes have the value specified.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderADAttributeMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The SenderADAttributeMatchesPatterns parameter specifies one or more patterns to check for in the specified Active Directory attribute of the sender. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the pattern. If you want to specify multiple patterns for multiple attributes, separate them with commas. The rule will be applied if the values of any of the specified attributes match the specified patterns for that attribute.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderAddressLocation</maml:name>
      <maml:description>
        <maml:para>The SenderAddressLocation parameter specifies the fields to look in when evaluating sender addresses. Prior to Exchange Server 2013 Cumulative Update 1, transport rules only processed message headers when evaluating senders. With the addition of the SenderAddressLocation parameter, you can configure the rules to also examine the message envelope (the sender information sent with the MAIL FROM command in the SMTP transmission) when evaluating senders.</maml:para>
        <maml:para>Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Header Only message headers are examined when evaluating senders.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Envelope Only the message envelope is examined when evaluating senders.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HeaderOrEnvelope Both message headers and the message envelope are examined when evaluating senders.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is Header.</maml:para>
        <maml:para>By configuring this parameter, you can evaluate the message envelope for the following conditions and exceptions):</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>From</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FromAddressContainsWords</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FromAddressMatchesPatterns</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FromMemberOf</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SenderDomainIs</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Header | Envelope | HeaderOrEnvelope</command:parameterValue>
      <dev:type>
        <maml:name>Header | Envelope | HeaderOrEnvelope</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderDomainIs</maml:name>
      <maml:description>
        <maml:para>The SenderDomainIs parameter specifies the sender's domain. The rule is applied to messages received from senders whose email addresses are in the specified domain.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderInRecipientList</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The SenderInRecipientList parameter specifies the condition when the sender is defined in a supervision list entry on a recipient's mailbox. Supervision list entries perform the following functions:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>They specify individual exceptions for the user in the closed campus supervision policy.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>They identify the user as a victim in the anti-bullying policy.</maml:para>
        </command:listItem></command:list>
        <maml:para>To view the supervision list entries that are configured on a user's mailbox, run the Get-SupervisionListEntry command and specify the user's mailbox.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderIpRanges</maml:name>
      <maml:description>
        <maml:para>The SenderIpRanges parameter specifies the IP ranges to compare with the sender's IP address. The rule is applied if the IP address of the sender falls within one of the IP ranges specified in this parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderManagementRelationship</maml:name>
      <maml:description>
        <maml:para>The SenderManagementRelationship parameter specifies a relationship between the sender and the recipient. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Manager The rule is applied if the sender is the manager of the recipient.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DirectReport The rule is applied if the sender is a direct report of the recipient.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Manager | DirectReport</command:parameterValue>
      <dev:type>
        <maml:name>Manager | DirectReport</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentTo</maml:name>
      <maml:description>
        <maml:para>The SentTo parameter specifies a recipient. The rule is applied to messages sent to the specified recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The SentToMemberOf parameter specifies a distribution group. The rule is applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no action is taken.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentToScope</maml:name>
      <maml:description>
        <maml:para>The SentToScope parameter specifies whether the message is sent to internal, external, or partner recipients. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>InOrganization The recipients are internal to your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotInOrganization The recipients are outside your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ExternalPartner The recipients are in a partner organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ExternalNonPartner The recipients are external to your organization, which isn't a partner organization.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</command:parameterValue>
      <dev:type>
        <maml:name>InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SetAuditSeverity</maml:name>
      <maml:description>
        <maml:para>The SetAuditSeverity parameter specifies the severity level assigned to an incident report that's generated and the corresponding entry logged in the message tracking logs. You can specify one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DoNotAudit No audit entry is logged.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Low The audit entry is assigned low severity.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Medium The audit entry is assigned medium severity.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>High The audit entry is assigned high severity.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SetHeaderName</maml:name>
      <maml:description>
        <maml:para>The SetHeaderName parameter specifies the SMTP header name to add or modify when the rule is applied. When the SetHeaderName parameter is used, you must also use the SetHeaderValue parameter to specify a value for the header.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SetHeaderValue</maml:name>
      <maml:description>
        <maml:para>The SetHeaderValue parameter specifies a value for the header specified in the SetHeaderName parameter.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderValue</command:parameterValue>
      <dev:type>
        <maml:name>HeaderValue</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SetSCL</maml:name>
      <maml:description>
        <maml:para>The SetSCL parameter modifies the SCL value of the message to the value specified. The SCL value can be a number from 0 through 9, or -1. The value -1 specifies that the message is from a trusted source.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SclValue</command:parameterValue>
      <dev:type>
        <maml:name>SclValue</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmtpRejectMessageRejectStatusCode</maml:name>
      <maml:description>
        <maml:para>The SmtpRejectMessageRejectStatusCode parameter specifies an enhanced status code to provide when rejecting a message.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RejectStatusCode</command:parameterValue>
      <dev:type>
        <maml:name>RejectStatusCode</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmtpRejectMessageRejectText</maml:name>
      <maml:description>
        <maml:para>The SmtpRejectMessageRejectText parameter specifies a text string to add to the rejection message. You must use this parameter with the SmtpRejectMessageRejectStatusCode parameter.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RejectText</command:parameterValue>
      <dev:type>
        <maml:name>RejectText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>StopRuleProcessing</maml:name>
      <maml:description>
        <maml:para>The StopRuleProcessing parameter specifies whether the processing of subsequent rules should be stopped for this message.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectContainsWords</maml:name>
      <maml:description>
        <maml:para>The SubjectContainsWords parameter specifies words to look for in the message subject.</maml:para>
        <maml:para>You can specify one or more words or phrases. When specifying more than one word or phrase, each word or phrase should be separated by a comma (,). When specifying a phrase that contains one or more spaces, you must enclose the phrase in quotation marks ("), for example:</maml:para>
        <maml:para>Word1,"Phrase with spaces",word2.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The SubjectMatchesPatterns parameter specifies text patterns to check for in the message subject.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectOrBodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The SubjectOrBodyContainsWords parameter specifies words to look for in the message subject or body. The rule is applied if any of the words or phrases specified is found in the message subject or body.</maml:para>
        <maml:para>You can specify one or more words or phrases. When specifying more than one word or phrase, each word or phrase should be separated by a comma (,). When specifying a phrase with one or more spaces, you must enclose the phrase in quotation marks ("), for example:</maml:para>
        <maml:para>Word1,"Phrase with spaces",word2.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectOrBodyMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The SubjectOrBodyMatchesPatterns parameter specifies text patterns to look for in the message subject or body. The rule is applied if the word specified is found in the message subject or body.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WithImportance</maml:name>
      <maml:description>
        <maml:para>The WithImportance parameter specifies message importance. The rule is applied to messages matching the specified importance. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>High</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Low</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Normal | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the Sales Team Disclaimer transport rule. Modifying the value of one condition doesn't affect other conditions, exceptions, or actions used in the rule.</maml:para>
        <maml:para />
        <maml:para>This example sets the FromMemberOf parameter to a value of Sales-Group, which specifies that the rule is applied if the sender of the message is a member of the Sales-Group distribution group.</maml:para>
        <maml:para />
        <maml:para>Set-TransportRule "Sales Team Disclaimer" -FromMemberOf "Sales-Group"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Transport rule conditions and exceptions include corresponding values to test for. For a list of supported transport rule conditions, see Transport rule conditions (predicates).</maml:para>
    <maml:para>Transport rules apply actions to messages, some with corresponding action values. For a list of supported transport rule actions, see Transport rule actions.</maml:para>
    <maml:para>For detailed information about how to create a transport rule, see Manage Transport Rules. To learn more about transport rules, see Transport rules.</maml:para>
    <maml:para>In on-premises Exchange organizations, Transport rules created on Mailbox servers are stored in Active Directory. All Mailbox servers in the organization have access to the same set of transport rules. On Edge Transport servers, transport rules are saved in the local copy of Active Directory Lightweight Directory Services (AD LDS). Transport rules aren't shared or replicated between Edge Transport servers or between Mailbox servers and Edge Transport servers. Also, Mailbox servers and Edge Transport servers share a set of common conditions and actions, but some conditions and actions are exclusive to each server role.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport rules" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/8328125b-e166-436f-95e6-1afafdbdb89a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>83376568-d37f-41b7-aea3-bd08333ce07e
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Disable-MalwareFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Disable-MalwareFilterRule cmdlet to disable malware filter rules in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Disable</command:verb>
    <command:noun>MalwareFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Disable-MalwareFilterRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the malware filter rule that you want to disable. You can use any value that uniquely identifies the rule. For example, you can use the name, GUID, or distinguished name (DN) of the malware filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example disables the enabled malware filter rule named Contoso Recipients.</maml:para>
        <maml:para />
        <maml:para>Disable-MalwareFilterRule "Contoso Recipients"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/83376568-d37f-41b7-aea3-bd08333ce07e(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>83417504-5d52-43b2-8cf5-e48acae72e3a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-TransportAgent</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-TransportAgent cmdlet to view the configuration of a transport agent.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>TransportAgent</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-TransportAgent</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">TransportAgentObjectId</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportService</maml:name>
        <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the display name of the transport agent to be displayed. The length of the name can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TransportAgentObjectId</command:parameterValue>
      <dev:type>
        <maml:name>TransportAgentObjectId</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportService</maml:name>
      <maml:description>
        <maml:para>The TransportService parameter specifies the transport service that you want to view or modify. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Hub for the Transport service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxSubmission for the Mailbox Transport Submission service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxDelivery for the Mailbox Transport Delivery service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FrontEnd for the Front End Transport service on Client Access servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Edge on Edge Transport servers.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      <dev:type>
        <maml:name>Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays a summary list of all transport agents installed on all Exchange servers in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-TransportAgent</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed information about the Transport Rule agent that's installed in the Transport service on a Mailbox server. The output of the Get-TransportAgent command is piped to the Format-List command to display the detailed configuration of the transport agent.</maml:para>
        <maml:para />
        <maml:para>Get-TransportAgent "Transport Rule Agent" -TransportService Hub | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport agents" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/83417504-5d52-43b2-8cf5-e48acae72e3a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>880b3124-76c5-4212-a8b9-8f4523f8cbe6
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Import-TransportRuleCollection</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Import-TransportRuleCollection cmdlet to import a transport rule collection. You can import a rule collection you previously exported as a backup, or import rules that you've exported from an older version of Exchange.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Import</command:verb>
    <command:noun>TransportRuleCollection</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Import-TransportRuleCollection</maml:name>
      <command:parameter required="True">
        <maml:name>FileData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MigrationSource</maml:name>
        <command:parameterValue required="True">None | Fope | Ehe</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="1">
      <maml:name>FileData</maml:name>
      <maml:description>
        <maml:para>The FileData parameter specifies the variable name that contains the content of the XML file. The content is retrieved using the Get-Content cmdlet.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force parameter specifies that the command will override any errors or warnings encountered during the import operation.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter is no longer used and will be deprecated.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MigrationSource</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Fope | Ehe</command:parameterValue>
      <dev:type>
        <maml:name>None | Fope | Ehe</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example imports a transport rule collection from the XML file ExportedRules.xml.</maml:para>
        <maml:para />
        <maml:para>[Byte[]]$Data = Get-Content -Path "C:\TransportRules\ExportedRules.xml" -Encoding Byte -ReadCount 0</maml:para>
        <maml:para>Import-TransportRuleCollection -FileData $Data</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Importing a transport rule collection from an XML file removes or overwrites all pre-existing transport rules that were defined in your organization. Make sure that you have a backup of your current transport rule collection before you import and overwrite your current transport rules.</maml:para>
    <maml:para>Importing file data is a two-step process. First you must load the data to a variable using the Get-Content cmdlet, and then use that variable to transmit the data to the cmdlet.</maml:para>
    <maml:para>For information about how to export a transport rule collection to an XML file, see Export-TransportRuleCollection.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport rules" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/880b3124-76c5-4212-a8b9-8f4523f8cbe6(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>89ac946b-575e-460c-8a9f-a775d22c87e9
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Disable-InboxRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Disable-InboxRule cmdlet to disable an Inbox rule.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Disable</command:verb>
    <command:noun>InboxRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Disable-InboxRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">InboxRuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AlwaysDeleteOutlookRulesBlob</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the identity of the Inbox rule to be disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InboxRuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>InboxRuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AlwaysDeleteOutlookRulesBlob</maml:name>
      <maml:description>
        <maml:para>The AlwaysDeleteOutlookRulesBlob parameter suppresses a warning that end users or administrators get if they use Outlook Web App or Windows PowerShell to modify Inbox rules.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress the confirmation prompt produced if rules created by Outlook exist on the mailbox. When taking an action using Inbox rules on Exchange 2013, any client-side rules are removed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the identity of the mailbox to which the Inbox rule belongs.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example disables the Inbox rule MoveAnnoncements in the mailbox Joe@Contoso.com.</maml:para>
        <maml:para />
        <maml:para>Disable-InboxRule -Identity "MoveAnnouncements" -Mailbox "Joe@Contoso.com"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>When you create, modify, remove, enable, or disable an Inbox rule on Microsoft Exchange Server 2013, any client-side rules created by Microsoft Outlook are removed.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbox rules" entry in the Recipients Permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/89ac946b-575e-460c-8a9f-a775d22c87e9(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>8f15c83c-c10a-4d9d-b135-35321430bdc2
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-HostedOutboundSpamFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-HostedOutboundSpamFilterPolicy cmdlet to view the settings of the outbound spam filter policy in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>HostedOutboundSpamFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-HostedOutboundSpamFilterPolicy</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">HostedOutboundSpamFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the outbound spam filter policy you want to view. You can use any value that uniquely identifies the policy. For example, you can specify the name, GUID, or distinguished name (DN) of the outbound spam filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HostedOutboundSpamFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>HostedOutboundSpamFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves details about the outbound spam filter policy named Default.</maml:para>
        <maml:para />
        <maml:para>Get-HostedOutboundSpamFilterPolicy Default | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/8f15c83c-c10a-4d9d-b135-35321430bdc2(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>969cd73d-05b2-4fc9-8a07-282d4108dae2
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-HostedContentFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-HostedContentFilterRule cmdlet to view content filter rules in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>HostedContentFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-HostedContentFilterRule</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>State</maml:name>
        <command:parameterValue required="True">Enabled | Disabled</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the content filter rule that you want to view. You can use any value that uniquely identifies the rule. For example, you can specify the name, GUID, or distinguished name (DN) of the content filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>State</maml:name>
      <maml:description>
        <maml:para>The State parameter filters the results by enabled or disabled content filter rules. Valid input for this parameter is Enabled or Disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Enabled | Disabled</command:parameterValue>
      <dev:type>
        <maml:name>Enabled | Disabled</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows a summary list of all the content filter rules in your cloud-based organization.</maml:para>
        <maml:para />
        <maml:para>Get-HostedContentFilterRule</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves details about the content filter rule named Contoso Recipients.</maml:para>
        <maml:para />
        <maml:para>Get-HostedContentFilterRule "Contoso Recipients" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/969cd73d-05b2-4fc9-8a07-282d4108dae2(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>9b3f460b-3853-4fa2-8d1f-4f60bb82a908
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-ResubmitRequest</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-ResubmitRequest cmdlet to remove requests to replay redundant copies of messages from Safety Net after a mailbox database recovery.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>ResubmitRequest</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-ResubmitRequest</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ResubmitRequestIdentityParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the resubmit request you want to remove. Each resubmit request is identified by an incremented integer value.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ResubmitRequestIdentityParameter</command:parameterValue>
      <dev:type>
        <maml:name>ResubmitRequestIdentityParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the resubmit request with the identity 5.</maml:para>
        <maml:para />
        <maml:para>Remove-ResubmitRequest 5</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes all resubmit requests.</maml:para>
        <maml:para />
        <maml:para>Get-ResubmitRequest | Remove-ResubmitRequest</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/9b3f460b-3853-4fa2-8d1f-4f60bb82a908(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>9fe1fe03-8f83-41e3-9bf5-084a392784d6
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-HostedContentFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Remove-HostedContentFilterPolicy cmdlet to remove content filter policies from your cloud-based organization.</maml:para>
      <maml:para>When a policy is removed and there are rules associated with it, the rules are not removed when the policy is removed. This is by design. If you want to remove the associated rules, you need to do this separately via the Remove-HostedContentFilterRule cmdlet.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>HostedContentFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-HostedContentFilterPolicy</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">HostedContentFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the content filter policy you want to remove. You can use any value that uniquely identifies the policy, For example, you can use the name, GUID or distinguished name (DN) of the content filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HostedContentFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>HostedContentFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress warning or confirmation messages. This switch can be used when the task is run programmatically and prompting for administrative input is inappropriate. If the Force switch isn't provided in the command, you're prompted for administrative input. You don't have to specify a value with this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the content filter policy named Contoso Content Filter Policy.</maml:para>
        <maml:para />
        <maml:para>Remove-HostedContentFilterPolicy "Contoso Content Filter Policy"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/9fe1fe03-8f83-41e3-9bf5-084a392784d6(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>a75a524b-2491-47b2-83e6-922cd0887c6d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Retry-Queue</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Retry-Queue cmdlet to force a connection attempt for a queue on a Mailbox server or an Edge Transport server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Retry</command:verb>
    <command:noun>Queue</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Retry-Queue</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">QueueIdentity</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Resubmit</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Retry-Queue</maml:name>
      <command:parameter required="True">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Resubmit</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter specifies one or more queues by using OPath filter syntax. The OPath filter includes a queue property name followed by a comparison operator and value, for example, {NextHopDomain -eq "contoso.com"}. For details about filterable queue properties and comparison operators, see Queue filters and Use the Exchange Management Shell to manage queues.</maml:para>
        <maml:para>You can specify multiple criteria by using the and comparison operator. Property values that aren't expressed as an integer must be enclosed in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the queue. Valid input for this parameter uses the syntax Server\Queue or Queue, for example, Mailbox01\contoso.com or Unreachable. For details about queue identity, see the "Queue identity" section in Use the Exchange Management Shell to manage queues.</maml:para>
      </maml:description>
      <command:parameterValue required="True">QueueIdentity</command:parameterValue>
      <dev:type>
        <maml:name>QueueIdentity</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Resubmit</maml:name>
      <maml:description>
        <maml:para>The Resubmit parameter specifies whether the queue contents should be resubmitted to the categorizer before a connection is established. Valid input for this parameter is $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
        <maml:para>You can use the Server parameter and the Filter parameter in the same command. You can't use the Server parameter and the Identity parameter in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example forces a connection attempt for all queues that meet the following criteria:</maml:para>
        <maml:para />
        <maml:para>The queues are holding messages for the domain contoso.com.</maml:para>
        <maml:para>The queues have a status of Retry.</maml:para>
        <maml:para>The queues are located on the server on which the command is executed.</maml:para>
        <maml:para>Retry-Queue -Filter {NextHopDomain -eq "contoso.com" -and Status -eq "Retry"}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Retry-Queue cmdlet forces a connection attempt for a queue that has a status of Retry. The cmdlet establishes a connection to the next hop if possible. If a connection isn't established, a new retry time is set. To use this command to retry delivery of messages in the Unreachable queue, you must include the Resubmit parameter.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/a75a524b-2491-47b2-83e6-922cd0887c6d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>ad72a9d6-4bac-4dd5-ae22-3246e05aac4e
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-InboundConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-InboundConnector cmdlet to view the settings for an Inbound connector in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>InboundConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-InboundConnector</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">InboundConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name, or GUID of the Inbound connector. If the Identity name contains spaces, enclose the name in quotation marks ("). You can omit the Identity parameter label.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InboundConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>InboundConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed configuration information for the Inbound connector named Inbound Connector for Contoso.com.</maml:para>
        <maml:para />
        <maml:para>Get-InboundConnector "Inbound Connector for Contoso.com" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all the Inbound connectors configured in your cloud-based organization.</maml:para>
        <maml:para />
        <maml:para>Get-InboundConnector</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Inbound connectors accept email messages from remote domains that require specific configuration options.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbound and Outbound connectors" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/ad72a9d6-4bac-4dd5-ae22-3246e05aac4e(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>af25a915-79d7-4797-bac1-3ccd7f65129a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-TransportServer</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-TransportServer cmdlet to set the transport configuration options for the Transport service on Mailbox servers or for Edge Transport servers.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>TransportServer</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-TransportServer</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveUserStatisticsLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveUserStatisticsLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveUserStatisticsLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveUserStatisticsLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AntispamAgentsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectivityLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ContentConversionTracingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DelayNotificationTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeltaSyncClientCertificateThumbprint</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DnsLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSAdapterEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSAdapterGuid</maml:name>
        <command:parameterValue required="True">Guid</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSProtocolOption</maml:name>
        <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDNSServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalIPAddress</maml:name>
        <command:parameterValue required="True">IPAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlowControlLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlowControlLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlowControlLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlowControlLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlowControlLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogFilePath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpProtocolLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HttpTransportSyncProxyServer</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSAdapterEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSAdapterGuid</maml:name>
        <command:parameterValue required="True">Guid</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSProtocolOption</maml:name>
        <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDNSServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IntraOrgConnectorProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IntraOrgConnectorSmtpMaxMessagesPerConnection</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IrmLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IrmLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IrmLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IrmLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IrmLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxActiveTransportSyncJobsPerProcessor</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConcurrentMailboxDeliveries</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConcurrentMailboxSubmissions</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConnectionRatePerMinute</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxNumberOfTransportSyncAttempts</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxOutboundConnections</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxPerDomainOutboundConnections</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageExpirationTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRetryInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTrackingLogSubjectLoggingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OutboundConnectionFailureRetryInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PickupDirectoryMaxHeaderSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PickupDirectoryMaxMessagesPerMinute</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PickupDirectoryMaxRecipientsPerMessage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PickupDirectoryPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipelineTracingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipelineTracingPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipelineTracingSenderAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PoisonMessageDetectionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PoisonThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProcessingSchedulerLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProcessingSchedulerLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProcessingSchedulerLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProcessingSchedulerLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProcessingSchedulerLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QueueLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QueueLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QueueLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QueueLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QueueMaxIdleTime</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceiveProtocolLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientValidationCacheEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReplayDirectoryPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResourceLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RootDropDirectoryPath</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RoutingTableLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RoutingTableLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RoutingTableLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendProtocolLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServerStatisticsLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServerStatisticsLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServerStatisticsLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServerStatisticsLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmtpEnableAllTlsVersions</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransientFailureRetryCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransientFailureRetryInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportMaintenanceLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportMaintenanceLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportMaintenanceLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportMaintenanceLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportMaintenanceLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncAccountsPoisonAccountThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncAccountsPoisonDetectionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncAccountsPoisonItemThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncAccountsSuccessivePoisonItemThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncExchangeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncFacebookEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncHubHealthLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncHubHealthLogFilePath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncHubHealthLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncHubHealthLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncHubHealthLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncImapEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLinkedInEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogFilePath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Error | Information | Verbose | RawData | Debugging</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncLogMaxFileSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncMaxDownloadItemsPerConnection</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncMaxDownloadSizePerConnection</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncMaxDownloadSizePerItem</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncPopEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportSyncRemoteConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UseDowngradedExchangeServerAuth</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WindowsLiveHotmailTransportSyncEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WlmLogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WlmLogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WlmLogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WlmLogPath</maml:name>
        <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server that you want to modify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActiveUserStatisticsLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ActiveUserStatisticsLogMaxAge parameter specifies the maximum duration that the per user activity statistics log files are kept. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 10 days for this parameter, use 10.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of this parameter to 00:00:00 prevents the automatic removal of server statistics log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActiveUserStatisticsLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ActiveUserStatisticsLogMaxDirectorySize parameter specifies the cap on the size of the per user activity statistics log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The minimum value is 1 megabyte (MB). The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ActiveUserStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ActiveUserStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActiveUserStatisticsLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ActiveUserStatisticsLogMaxFileSize parameter specifies the maximum file size for the per user activity statistics log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ActiveUserStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ActiveUserStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActiveUserStatisticsLogPath</maml:name>
      <maml:description>
        <maml:para>The ActiveUserStatisticsLogPath parameter specifies the location of per user activity statistics log storage. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ActiveUsersStats. Setting the value of this parameter to $null disables server statistics logging.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogEnabled</maml:name>
      <maml:description>
        <maml:para>The AgentLogEnabled parameter specifies whether the agent log is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The AgentLogMaxAge parameter specifies the maximum age for the agent log file. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Setting the value of the AgentLogMaxAge parameter to 00:00:00 prevents the automatic removal of agent log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The AgentLogMaxDirectorySize parameter specifies the maximum size of all agent logs in the agent log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the AgentLogMaxFileSize parameter must be less than or equal to the value of the AgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The AgentLogMaxFileSize parameter specifies the maximum size of each agent log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the AgentLogMaxFileSize parameter must be less than or equal to the value of the AgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentLogPath</maml:name>
      <maml:description>
        <maml:para>The AgentLogPath parameter specifies the default agent log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\AgentLog. Setting the value of this parameter to $null disables agent logging. However, setting this parameter to $null when the value of the AgentLogEnabled attribute is $true generates event log errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AntispamAgentsEnabled</maml:name>
      <maml:description>
        <maml:para>The AntispamAgentsEnabled parameter specifies whether anti-spam agents are installed on the server specified with the Identity parameter. The default value is $false for the Transport service on Mailbox servers and $true on Edge servers.</maml:para>
        <maml:para>You set this parameter by using a script. You shouldn't modify this parameter manually.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogEnabled</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogEnabled parameter specifies whether the connectivity log is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxAge parameter specifies the maximum age for the connectivity log file. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 25 days for this parameter, use 25.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the ConnectivityLogMaxAge parameter to 00:00:00 prevents the automatic removal of connectivity log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxDirectorySize parameter specifies the maximum size of all connectivity logs in the connectivity log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 1000 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogMaxFileSize parameter specifies the maximum size of each connectivity log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectivityLogPath</maml:name>
      <maml:description>
        <maml:para>The ConnectivityLogPath parameter specifies the default connectivity log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\Connectivity. Setting the value of this parameter to $null disables connectivity logging. However, setting this parameter to $null when the value of the ConnectivityLogEnabled attribute is $true generates event log errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ContentConversionTracingEnabled</maml:name>
      <maml:description>
        <maml:para>The ContentConversionTracingEnabled parameter specifies whether content conversion tracing is enabled. Content conversion tracing captures content conversion failures that occur in the Transport service on a Mailbox server or on the Edge server. The default value is $false. Content conversion tracing captures a maximum of 128 MB of content conversion failures. When the 128 MB limit is reached, no more content conversion failures are captured. Content conversion tracing captures the complete contents of e-mail messages to the path specified by the PipelineTracingPath parameter. Make sure that you restrict access to this directory. The permissions required on the directory specified by the PipelineTracingPath parameter are as follows:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Administrators: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Network Service: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>System: Full Control</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DelayNotificationTimeout</maml:name>
      <maml:description>
        <maml:para>The DelayNotificationTimeout parameter specifies how long the server waits before it generates a delayed delivery status notification (DSN) message. The default value is 4 hours.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 3.5 hours for this parameter, use 03:30:00. The valid input range for this parameter is from 00:00:01 through 30.00:00:00. The value of the DelayNotificationTimeout parameter should always be greater than the value of the TransientFailureRetryCount parameter multiplied by the value of the TransientFailureRetryInterval parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeltaSyncClientCertificateThumbprint</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogEnabled</maml:name>
      <maml:description>
        <maml:para>The DnsLogEnabled parameter specifies whether the DNS log is enabled. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The DnsLogMaxAge parameter specifies the maximum age for the DNS log file. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Setting the value of the DnsLogMaxAge parameter to 00:00:00 prevents the automatic removal of DNS log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The DnsLogMaxDirectorySize parameter specifies the maximum size of all DNS logs in the DNS log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 100 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the DnsLogMaxFileSize parameter must be less than or equal to the value of the DnsLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the DNS log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The DnsLogMaxFileSize parameter specifies the maximum size of each DNS log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the DnsLogMaxFileSize parameter must be less than or equal to the value of the DnsLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the DNS log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DnsLogPath</maml:name>
      <maml:description>
        <maml:para>The DnsLogPath parameter specifies the DNS log directory location. The default value is blank ($null), which indicates no location is configured. If you enable DNS logging, you need to specify a local file path for the DNS log files by using this parameter. If the path contains spaces, enclose the entire path value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSAdapterEnabled</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSAdapterEnabled parameter specifies one or more Domain Name System (DNS) servers that Exchange uses for external DNS lookups. When the ExternalDNSAdapterEnabled parameter is set to $true, DNS lookups of destinations outside the Exchange organization are performed by using the DNS settings of the external network adapter specified by the value of the ExternalDNSAdapterGuid parameter. If you want to specify a custom list of DNS servers used for external Exchange DNS lookups only, you must specify the DNS servers by using the ExternalDNSServers parameter, and you must also set the value of the ExternalDNSAdapterEnabled parameter to $false. The default value of the ExternalDNSAdapterEnabled parameter is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSAdapterGuid</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSAdapterGuid parameter specifies the network adapter that has the DNS settings used for DNS lookups of destinations that exist outside the Exchange organization. The concept of an external network adapter and an internal network adapter is only applicable in a multi-homed Exchange server environment. When no particular network adapter is specified as the network adapter for external DNS lookups, the value of the ExternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000, and external DNS lookups are performed by using the DNS settings of any available network adapter. You may enter the GUID of a specific network adapter to use for external DNS lookups. The default value of the ExternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000.</maml:para>
        <maml:para>If the value of the ExternalDNSAdapterEnabled parameter is set to $false, the value of the ExternalDNSAdapterGuid parameter is ignored, and the list of DNS servers from the ExternalDNSServers parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Guid</command:parameterValue>
      <dev:type>
        <maml:name>Guid</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSProtocolOption</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSProtocolOption parameter specifies which protocol to use when querying external DNS servers. The valid options for this parameter are Any, UseTcpOnly, and UseUdpOnly. The default value is Any.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      <dev:type>
        <maml:name>Any | UseUdpOnly | UseTcpOnly</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDNSServers</maml:name>
      <maml:description>
        <maml:para>The ExternalDNSServers parameter specifies the list of external DNS servers that the server queries when resolving a remote domain. DNS servers are specified by IP address. The default value is an empty list ({}).</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
        <maml:para>If the value of the ExternalDNSAdapterEnabled parameter is set to $true, the ExternalDNSServers parameter and its list of DNS servers isn't used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalIPAddress</maml:name>
      <maml:description>
        <maml:para>The ExternalIPAddress parameter specifies the IP address used in the Received message header field for every message that travels through the Edge server or the Transport service on a Mailbox server. The IP address in the Received header field is used for hop count and routing loop detection. The IP address specified by the ExternalIPAddress parameter overrides the external network adapter's actual IP address. Typically, you would want to set the value of the ExternalIPAddress parameter to match the value of your domain's public MX record. The default value of the ExternalIPAddress parameter is blank. This means the actual IP address of the external network adapter is used in the Received header field.</maml:para>
      </maml:description>
      <command:parameterValue required="True">IPAddress</command:parameterValue>
      <dev:type>
        <maml:name>IPAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlowControlLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlowControlLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlowControlLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlowControlLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlowControlLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogFilePath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogLoggingLevel</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>None | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpProtocolLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HttpTransportSyncProxyServer</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSAdapterEnabled</maml:name>
      <maml:description>
        <maml:para>The InternalDNSAdapterEnabled parameter specifies one or more DNS servers that Exchange uses for internal DNS lookups. When the InternalDNSAdapterEnabled parameter is set to $true, DNS lookups of destinations inside the Exchange organization are performed by using the DNS settings of the internal network adapter specified by the value of the InternalDNSAdapterGuid parameter. If you want to specify a custom list of DNS servers used for internal Exchange DNS lookups only, you must specify the DNS servers by using the InternalDNSServers parameter, and you must also set the value of the InternalDNSAdapterEnabled parameter to $false. The default value of the InternalDNSAdapterEnabled parameter is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSAdapterGuid</maml:name>
      <maml:description>
        <maml:para>The InternalDNSAdapterGuid parameter specifies the network adapter that has the DNS settings used for DNS lookups of servers that exist inside the Exchange organization. The concept of an internal network adapter and an external network adapter is only applicable in a multi-homed Exchange server environment. When no particular network adapter is specified as the network adapter for external DNS lookups, the value of the InternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000, and internal DNS lookups are performed by using the DNS settings of any available network adapter. You may enter the GUID of a specific network adapter to use for internal DNS lookups. The default value of the InternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000.</maml:para>
        <maml:para>If the value of the InternalDNSAdapterEnabled parameter is set to $false, the value of the InternalDNSAdapterGuid parameter is ignored, and the list of DNS servers from the InternalDNSServers parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Guid</command:parameterValue>
      <dev:type>
        <maml:name>Guid</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSProtocolOption</maml:name>
      <maml:description>
        <maml:para>The InternalDNSProtocolOption parameter specifies which protocol to use when you query internal DNS servers. Valid options for this parameter are Any, UseTcpOnly, or UseUdpOnly.</maml:para>
        <maml:para>The default value is Any.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Any | UseUdpOnly | UseTcpOnly</command:parameterValue>
      <dev:type>
        <maml:name>Any | UseUdpOnly | UseTcpOnly</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDNSServers</maml:name>
      <maml:description>
        <maml:para>The InternalDNSServers parameter specifies the list of DNS servers that should be used when resolving a domain name. DNS servers are specified by IP address. The default value is any empty list ({}).</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
        <maml:para>If the InternalDNSAdapterGuid parameter is set, and the value of the InternalDNSAdapterEnabled parameter is set to $true, the InternalDNSServers parameter and its list of DNS servers isn't used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IntraOrgConnectorProtocolLoggingLevel</maml:name>
      <maml:description>
        <maml:para>The IntraOrgConnectorProtocolLoggingLevel parameter enables or disables SMTP protocol logging on the implicit and invisible intra-organization Send connectors that are used to transmit messages between Exchange servers in the Exchange organization.</maml:para>
        <maml:para>Valid values for this parameter are None or Verbose. The value Verbose enables protocol logging for the connector. The value None disables protocol logging for the connector. The default value is None. When the IntraOrgConnectorProtocolLoggingLevel parameter is set to Verbose, the information is written to the Send connector protocol log specified by the SendProtocolLog parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>None | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IntraOrgConnectorSmtpMaxMessagesPerConnection</maml:name>
      <maml:description>
        <maml:para>The IntraOrgConnectorSmtpMaxMessagesPerConnection parameter specifies the maximum number of messages per connection limit on the implicit and invisible intra-organization Send connectors that are used to transmit messages between Exchange servers in the Exchange organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IrmLogEnabled</maml:name>
      <maml:description>
        <maml:para>The IrmLogEnabled parameter enables logging of Information Rights Management (IRM) transactions. IRM logging is enabled by default. Values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>$true Enable IRM logging</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>$false Disable IRM logging</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IrmLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The IrmLogMaxAge parameter specifies the maximum age for the IRM log file. Log files that are older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>The valid input range for this parameter is 00:00:00 to 24855.03:14:07. Setting the value of the IrmLogMaxAge parameter to 00:00:00 prevents the automatic removal of connectivity log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IrmLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This IrmLogMaxDirectorySize parameter specifies the maximum size of all IRM logs in the connectivity log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the IrmLogMaxFileSize parameter must be less than or equal to the value of the IrmLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the IRM log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IrmLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This IrmLogMaxFileSize parameter specifies the maximum size of each IRM log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the IrmLogMaxFileSize parameter must be less than or equal to the value of the IrmLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the IRM log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IrmLogPath</maml:name>
      <maml:description>
        <maml:para>The IrmLogPath parameter specifies the default IRM log directory location. The default location is %ExchangeInstallPath%Logging\IRMLogs. If you set the value of the IrmLogPath parameter to $null, you effectively disable IRM logging. However, if you set the value of the IrmLogPath parameter to $null when the value of the IrmLogEnabled attribute is $true, Exchange will log errors in the Application event log. The preferred way for disabling IRM logging is to set the IrmLogEnabled to $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxActiveTransportSyncJobsPerProcessor</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConcurrentMailboxDeliveries</maml:name>
      <maml:description>
        <maml:para>The MaxConcurrentMailboxDeliveries parameter specifies the maximum number of delivery threads that the transport service can have open at the same time to deliver messages to mailboxes. The default value is 20. The valid input range for this parameter is from 1 through 256. We recommend that you don't modify the default value unless Microsoft Customer Service and Support advises you to do this.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConcurrentMailboxSubmissions</maml:name>
      <maml:description>
        <maml:para>The MaxConcurrentMailboxSubmissions parameter specifies the maximum number of submission threads that the transport service can have open at the same time to send messages from mailboxes. The default value is 20. The valid input range for this parameter is from 1 through 256.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConnectionRatePerMinute</maml:name>
      <maml:description>
        <maml:para>The MaxConnectionRatePerMinute parameter specifies the maximum rate that connections are allowed to be opened with the transport service. If many connections are attempted with the transport service at the same time, the MaxConnectionRatePerMinute parameter limits the rate that the connections are opened so that the server's resources aren't overwhelmed. The default value is 1200 connections per minute. The valid input range for this parameter is from 1 through 2147483647.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxNumberOfTransportSyncAttempts</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxOutboundConnections</maml:name>
      <maml:description>
        <maml:para>The MaxOutboundConnections parameter specifies the maximum number of outbound connections that can be open at a time. The default value is 1000. The valid input range for this parameter is from 1 through 2147483647. If you enter a value of unlimited, no limit is imposed on the number of outbound connections. The value of the MaxOutboundConnections parameter must be greater than or equal to the value of the MaxPerDomainOutboundConnections parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxPerDomainOutboundConnections</maml:name>
      <maml:description>
        <maml:para>The MaxPerDomainOutboundConnections parameter specifies the maximum number of concurrent connections to any single domain. The default value is 20. The valid input range for this parameter is from 1 through 2147483647. If you enter a value of unlimited, no limit is imposed on the number of outbound connections per domain. The value of the MaxPerDomainOutboundConnections parameter must be less than or equal to the value of the MaxOutboundConnections parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageExpirationTimeout</maml:name>
      <maml:description>
        <maml:para>The MessageExpirationTimeout parameter specifies the maximum time that a particular message can remain in a queue. If a message remains in the queue for longer than this period of time, the message is returned to the sender as a permanent failure. The default value is 2 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 3 days for this parameter, use 3.00:00:00. The valid input range for this parameter is from 00:00:05 through 90.00:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageRetryInterval</maml:name>
      <maml:description>
        <maml:para>The MessageRetryInterval parameter specifies the retry interval for individual messages after a connection failure with a remote server. The default value is 1 minute.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 2 minutes for this parameter, use 00:02:00. The valid input range for this parameter is from 00:00:01 through 1.00:00:00. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogEnabled</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogEnabled parameter specifies whether message tracking is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogMaxAge parameter specifies the message tracking log maximum file age. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 20 days for this parameter, use 20.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the MessageTrackingLogMaxAge parameter to 00:00:00 prevents the automatic removal of message tracking log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogMaxDirectorySize parameter specifies the maximum size of the message tracking log directory. When the maximum directory size is reached, the server deletes the oldest log files first.</maml:para>
        <maml:para>The maximum size of the message tracking log directory is calculated as the total size of all log files that have the same name prefix. Other files that don't follow the name prefix convention aren't counted in the total directory size calculation. Renaming old log files or copying other files into the message tracking log directory could cause the directory to exceed its specified maximum size.</maml:para>
        <maml:para>For Mailbox servers, the maximum size of the message tracking log directory isn't the specified maximum size because the message tracking log files generated by the Transport service and the Mailbox Transport service have different name prefixes. Message tracking log files for the Transport service or for Edge servers begin with the name prefix MSGTRK. Message tracking log files for the Mailbox Transport service begin with the name prefix MSGTRKM. For Mailbox servers, the maximum size of the message tracking log directory is two times the specified value.</maml:para>
        <maml:para>The default value is 1000 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the MessageTrackingLogMaxFileSize parameter must be less than or equal to the value of the MessageTrackingLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the message tracking log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogMaxFileSize parameter specifies the maximum size of the message tracking log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the MessageTrackingLogMaxFileSize parameter must be less than or equal to the value of the MessageTrackingLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 4294967296 bytes (4 GB). If you enter a value of unlimited, no size limit is imposed on the message tracking log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogPath</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogPath parameter specifies the location of the message tracking logs. The default location is %ExchangeInstallPath%TransportRoles\Logs\MessageTracking. Setting the value of this parameter to $null disables message tracking. However, setting this parameter to $null when the value of the MessageTrackingLogEnabled attribute is $true generates event log errors. The preferred method to disable message tracking is to use the MessageTrackingLogEnabled parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTrackingLogSubjectLoggingEnabled</maml:name>
      <maml:description>
        <maml:para>The MessageTrackingLogSubjectLoggingEnabled parameter specifies whether the message subject should be included in the message tracking log. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OutboundConnectionFailureRetryInterval</maml:name>
      <maml:description>
        <maml:para>The OutboundConnectionFailureRetryInterval parameter specifies the retry interval for subsequent connection attempts to a remote server where previous connection attempts have failed. The previously failed connection attempts are controlled by the TransientFailureRetryCount and TransientFailureRetryInterval parameters. For the Transport service on a Mailbox server, the default value of the OutboundConnectionFailureRetryInterval parameter is 10 minutes. On an Edge server, the default value is 30 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 15 minutes for this parameter, use 00:15:00. The valid input range for this parameter is from 00:00:01 through 20.00:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PickupDirectoryMaxHeaderSize</maml:name>
      <maml:description>
        <maml:para>The PickupDirectoryMaxHeaderSize parameter specifies the maximum message header size that can be submitted to the Pickup directory. The default value is 64 KB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 32768 through 2147483647 bytes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PickupDirectoryMaxMessagesPerMinute</maml:name>
      <maml:description>
        <maml:para>The PickupDirectoryMaxMessagesPerMinute parameter specifies the maximum number of messages processed per minute by the Pickup directory and by the Replay directory. Each directory can independently process message files at the rate specified by the PickupDirectoryMaxMessagesPerMinute parameter. The default value is 100. The valid input range for this parameter is from 1 through 20000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PickupDirectoryMaxRecipientsPerMessage</maml:name>
      <maml:description>
        <maml:para>The PickupDirectoryMaxRecipientsPerMessage parameter specifies the maximum number of recipients that can be included on an e-mail message. The default value is 100. The valid input range for this parameter is from 1 through 10000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PickupDirectoryPath</maml:name>
      <maml:description>
        <maml:para>The PickupDirectoryPath parameter specifies the location of the Pickup directory. The Pickup directory is used by administrators and third-party applications to create and submit messages. The default location is %ExchangeInstallPath%TransportRoles\Pickup. If the value of the PickupDirectoryPath parameter is set to $null, the Pickup directory is disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PipelineTracingEnabled</maml:name>
      <maml:description>
        <maml:para>The PipelineTracingEnabled parameter specifies whether to enable pipeline tracing. Pipeline tracing captures message snapshot files that record the changes made to the message by each transport agent configured in the transport service on the server. Pipeline tracing creates verbose log files that accumulate quickly. Pipeline tracing should only be enabled for a short time to provide in-depth diagnostic information that enables you to troubleshoot problems. In addition to troubleshooting, you can use pipeline tracing to validate changes that you make to the configuration of the transport service where you enable pipeline tracing. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PipelineTracingPath</maml:name>
      <maml:description>
        <maml:para>The PipelineTracingPath parameter specifies the location of the pipeline tracing logs. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\PipelineTracing. The path must be local to the Exchange computer. Setting the value of this parameter to $null disables pipeline tracing. However, setting this parameter to $null when the value of the PipelineTracingEnabled attribute is $true generates event log errors. The preferred method to disable pipeline tracing is to use the PipelineTracingEnabled parameter. Pipeline tracing captures the complete contents of e-mail messages to the path specified by the PipelineTracingPath parameter. Make sure that you restrict access to this directory. The permissions required on the directory specified by the PipelineTracingPath parameter are as follows:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Administrators: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Network Service: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>System: Full Control</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PipelineTracingSenderAddress</maml:name>
      <maml:description>
        <maml:para>The PipelineTracingSenderAddress parameter specifies the sender e-mail address that invokes pipeline tracing. Only messages from this address generate pipeline tracing output. The address can be either inside or outside the Exchange organization. Depending on your requirements, you may have to set this parameter to different sender addresses and send new messages to start the transport agents or routes that you want to test. The default value of this parameter is $null.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PoisonMessageDetectionEnabled</maml:name>
      <maml:description>
        <maml:para>The PoisonMessageDetectionEnabled parameter specifies whether poison messages should be detected. The default value is $true. Poison messages are messages determined to be potentially harmful to the Exchange system after a server failure. Poison messages are put in the poison message queue. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PoisonThreshold</maml:name>
      <maml:description>
        <maml:para>The PoisonThreshold parameter specifies the number of times a message can be rejected before it's classified as a poison message. The default value is 2. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this. The valid input range for this parameter is from 1 through 10.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProcessingSchedulerLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProcessingSchedulerLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProcessingSchedulerLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProcessingSchedulerLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProcessingSchedulerLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QueueLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The QueueLogMaxAge parameter specifies the maximum age of the queue log files. Log files that are older than the specified value are deleted. The default value is 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 10 days for this parameter, use 10.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the QueueLogMaxAge parameter to 00:00:00 prevents the automatic removal of queue log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QueueLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The QueueLogMaxDirectorySize parameter specifies the maximum size of the queue log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The default value is 200 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the QueueLogMaxFileSize parameter must be less than or equal to the value of the QueueLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the queue log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QueueLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The QueueLogMaxFileSize parameter specifies the maximum size of the queue log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the QueueLogMaxFileSize parameter must be less than or equal to the value of the QueueLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the queue log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QueueLogPath</maml:name>
      <maml:description>
        <maml:para>The QueueLogPath parameter specifies the path of the queue log directory. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\QueueViewer. Setting the value of this parameter to $null disables queue logging.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QueueMaxIdleTime</maml:name>
      <maml:description>
        <maml:para>The QueueMaxIdleTime parameter specifies the period of time an empty delivery queue can exist before the queue is removed. The default value is 3 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 5 minutes for this parameter, use 00:05:00. The valid input range for this parameter is from 00:00:05 through 01:00:00. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxAge parameter specifies the maximum age of the Receive connector protocol log file. Log files that are older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 20 days for this parameter, use 20.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the ReceiveProtocolLogMaxAge parameter to 00:00:00 prevents the automatic removal of Receive connector protocol log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxDirectorySize parameter specifies the maximum size of the Receive connector protocol log directory shared by all the Receive connectors that exist on the server. When the maximum directory size is reached, the server deletes the oldest log files first. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ReceiveProtocolLogMaxFileSize parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Receive connector protocol log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogMaxFileSize parameter specifies the maximum size of the Receive connector protocol log files shared by all the Receive connectors that exist on the server. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ReceiveProtocolLogMaxFileSize parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Receive connector protocol log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceiveProtocolLogPath</maml:name>
      <maml:description>
        <maml:para>The ReceiveProtocolLogPath parameter specifies the path of the protocol log directory for all the Receive connectors that exist on the server. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ProtocolLog\SmtpReceive. Setting the value of this parameter to $null disables protocol logging for all Receive connectors on the server. However, setting this parameter to $null when the value of the ProtocolLoggingLevel attribute for any Receive connector on the server is Verbose generates event log errors. The preferred method of disabling protocol logging is to use the Set-ReceiveConnector cmdlet to set the ProtocolLoggingLevel to None on each Receive connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientValidationCacheEnabled</maml:name>
      <maml:description>
        <maml:para>The RecipientValidationCacheEnabled parameter specifies whether the recipient addresses used by transport agents, such as the Recipient Filtering agent, are cached. The default value is $true on Edge servers and $false for the Transport service on Mailbox servers.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReplayDirectoryPath</maml:name>
      <maml:description>
        <maml:para>The ReplayDirectoryPath parameter specifies the path of the Replay directory. The Replay directory is used to resubmit exported messages and to receive messages from foreign gateway servers. The default location is %ExchangeInstallPath%TransportRoles\Replay. If the value of the ReplayDirectoryPath parameter is set to $null, the Replay directory is disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResourceLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RootDropDirectoryPath</maml:name>
      <maml:description>
        <maml:para>The RootDropDirectoryPath parameter specifies the top-level location of the Drop directory used by all Foreign connectors defined in the Transport service on a Mailbox server. The value of the RootDropDirectoryPath parameter may be a local path, or a Universal Naming Convention (UNC) path to a remote server. By default, the RootDropDirectoryPath parameter is blank. This indicates the value of RootDropDirectoryPath is the Exchange installation folder. The RootDropDirectoryPath parameter is used with the DropDirectory parameter in the Set-ForeignConnector cmdlet to specify the location for outgoing messages going to the address spaces defined on the Foreign connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RoutingTableLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The RoutingTableLogMaxAge parameter specifies the maximum routing table log age. Log files older than the specified value are deleted. The default value is 7 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 5 days for this parameter, use 5.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the RoutingTableLogMaxAge parameter to 00:00:00 prevents the automatic removal of routing table log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RoutingTableLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The RoutingTableLogMaxDirectorySize parameter specifies the maximum size of the routing table log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The default value is 50 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the routing table log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RoutingTableLogPath</maml:name>
      <maml:description>
        <maml:para>The RoutingTableLogPath parameter specifies the directory location where routing table log files should be stored. The default location is %ExchangeInstallPath%TransportRoles\Logs\Routing. Setting the value of the RoutingTableLogPath parameter to $null disables routing table logging.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxAge parameter specifies the Send connector protocol log file maximum age. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 25 days for this parameter, use 25.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the SendProtocolLogMaxAge parameter to 00:00:00 prevents the automatic removal of Send connector protocol log files because of their age.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxDirectorySize parameter specifies the maximum size of the Send connector protocol log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The minimum value is 1 MB. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the SendProtocolLogMaxFileSize parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Send connector protocol log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogMaxFileSize parameter specifies the maximum size of the Send connector protocol log files shared by all the Send connectors that exist on a server. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the SendProtocolLogMaxFileSize parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Send connector protocol log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendProtocolLogPath</maml:name>
      <maml:description>
        <maml:para>The SendProtocolLogPath parameter specifies the location of protocol log storage for the Send connectors. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ProtocolLog\SmtpSend. Setting the value of this parameter to $null disables protocol logging for all Send connectors on the server. However, setting this parameter to $null when the value of the ProtocolLoggingLevel or IntraOrgConnectorProtocolLoggingLevel attribute for any Send connector on the server is Verbose generates event log errors. The preferred method of disabling protocol logging is to use the Set-SendConnector cmdlet to set the ProtocolLoggingLevel parameter to None on each Send connector and to set the IntraOrgConnectorProtocolLoggingLevel parameter to None.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ServerStatisticsLogMaxAge</maml:name>
      <maml:description>
        <maml:para>The ServerStatisticsLogMaxAge parameter specifies the maximum duration that the server statistics log files are kept. Log files older than the specified value are deleted. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 60 days for this parameter, use 60.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of this parameter to 00:00:00 prevents the automatic removal of server statistics log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ServerStatisticsLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The ServerStatisticsLogMaxDirectorySize parameter specifies the cap on the size of the server statistics log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The minimum value is 1 MB. The default value is 250 MB. When you enter a value, qualify the value with one of the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ServerStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ServerStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ServerStatisticsLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The ServerStatisticsLogMaxFileSize parameter specifies the maximum file size for the server statistics log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the ServerStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ServerStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ServerStatisticsLogPath</maml:name>
      <maml:description>
        <maml:para>The ServerStatisticsLogPath parameter specifies the location of server statistics log storage. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ServerStats. Setting the value of this parameter to $null disables server statistics logging.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmtpEnableAllTlsVersions</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransientFailureRetryCount</maml:name>
      <maml:description>
        <maml:para>The TransientFailureRetryCount parameter specifies the maximum number of immediate connection retries attempted when the server encounters a connection failure with a remote server. The default value is 6. The valid input range for this parameter is from 0 through 15. When the value of this parameter is set to 0, the server doesn't immediately attempt to retry an unsuccessful connection, and the next connection attempt is controlled by the OutboundConnectionFailureRetryInterval parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransientFailureRetryInterval</maml:name>
      <maml:description>
        <maml:para>The TransientFailureRetryInterval parameter controls the connection interval between each connection attempt specified by the TransientFailureRetryCount parameter. For the Transport service on a Mailbox server, the default value of the TransientFailureRetryInterval parameter is 5 minutes. On an Edge server, the default value is 10 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 8 minutes for this parameter, use 00:08:00. The valid input range for this parameter is from 00:00:01 through 12:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportMaintenanceLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportMaintenanceLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportMaintenanceLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportMaintenanceLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportMaintenanceLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncAccountsPoisonAccountThreshold</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncAccountsPoisonDetectionEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncAccountsPoisonItemThreshold</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncAccountsSuccessivePoisonItemThreshold</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncExchangeEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncFacebookEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncHubHealthLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncHubHealthLogFilePath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncHubHealthLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncHubHealthLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncHubHealthLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncImapEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLinkedInEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogFilePath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogLoggingLevel</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Error | Information | Verbose | RawData | Debugging</command:parameterValue>
      <dev:type>
        <maml:name>None | Error | Information | Verbose | RawData | Debugging</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncMaxDownloadItemsPerConnection</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncMaxDownloadSizePerConnection</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncMaxDownloadSizePerItem</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncPopEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportSyncRemoteConnectionTimeout</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UseDowngradedExchangeServerAuth</maml:name>
      <maml:description>
        <maml:para>The UseDowngradedExchangeServerAuth parameter specifies whether the Generic Security Services application programming interface (GSSAPI) authentication method is used on connections where Transport Layer Security (TLS) is disabled.</maml:para>
        <maml:para>Normally, TLS is required for connections between the Transport services on Mailbox servers in your organization. On TLS secured connections, Kerberos authentication is used by default. However, there may be scenarios where you need to disable TLS between specific Transport services in your organization. When you do that, you need to set this parameter to $true to provide an alternative authentication method. The default value is $false. You shouldn't set this value to $true unless it's absolutely required.</maml:para>
        <maml:para>If you set this parameter to $true, you also need to create a specific Receive connector to service the non-TLS connections. This Receive connector must have remote IP address ranges specified to ensure that it's only used for non-TLS connections. You also must set the SuppressXAnonymousTls attribute of the Receive connector to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WindowsLiveHotmailTransportSyncEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WlmLogMaxAge</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WlmLogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WlmLogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WlmLogPath</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LocalLongFullPath</command:parameterValue>
      <dev:type>
        <maml:name>LocalLongFullPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the DelayNotificationTimeout parameter to 13 hours on server named Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Set-TransportServer Mailbox01 -DelayNotificationTimeout 13:00:00</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the TransientFailureRetryCount parameter to 3 and sets the TransientFailureRetryInterval parameter to 30 seconds on server named Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Set-TransportServer Mailbox01 -TransientFailureRetryCount 3 -TransientFailureRetryInterval 00:00:30</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the ReceiveProtocolLogPath parameter to C:\SMTP Protocol Logs\Receive.log on server Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Set-TransportServer Mailbox01 -ReceiveProtocolLogPath "C:\SMTP Protocol Logs\Receive.log"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Set-TransportServer cmdlet will be removed in a future version of Exchange. You should use the Set-TransportService cmdlet instead.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport service" and "Edge Transport server" entries in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/af25a915-79d7-4797-bac1-3ccd7f65129a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>b02ad57a-460a-4dc2-a521-788cd893c269
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-InboxRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-InboxRule cmdlet to view Inbox rule properties. Inbox rules are used to process messages in the Inbox based on conditions specified and take actions such as moving a message to a specified folder or deleting a message.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>InboxRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-InboxRule</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">InboxRuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DescriptionTimeFormat</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DescriptionTimeZone</maml:name>
        <command:parameterValue required="True">ExTimeZoneValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeHidden</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DescriptionTimeFormat</maml:name>
      <maml:description>
        <maml:para>The DescriptionTimeFormat parameter specifies the format in which time values are returned in the rule description. You must use standard time value format settings, for example:</maml:para>
        <maml:para>mm/dd/yyyy, where mm is the 2-digit month, dd is the 2-digit day, and yyyy is the 4-digit year.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DescriptionTimeZone</maml:name>
      <maml:description>
        <maml:para>The DescriptionTimeZone parameter specifies the format in which the time zone for time values is returned in the rule description. Use a valid Microsoft Windows time zone name.</maml:para>
        <maml:para>You can use the Windows PowerShell command-line interface to retrieve time zone names from the registry, for example:</maml:para>
        <maml:para>$timezone = Get-ChildItem "HKLM :\Software\Microsoft\Windows NT\CurrentVersion\Time zones" | For-Each {Get-ItemProperty $_.PSPath}; $timezone | Format-Table pschildname,display -auto</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExTimeZoneValue</command:parameterValue>
      <dev:type>
        <maml:name>ExTimeZoneValue</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the identity of an Inbox rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InboxRuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>InboxRuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeHidden</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the mailbox to which the Inbox rule belongs. You can use one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Domain\Account</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User principal name (UPN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SmtpAddress</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves all Inbox rules for the mailbox Joe@Contoso.com.</maml:para>
        <maml:para />
        <maml:para>Get-InboxRule -Mailbox Joe@Contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves the Inbox rule ReceivedLastYear from the mailbox joe@contoso.com on which the ReceivedBeforeDate parameter was set when the rule was created. The DescriptionTimeFormat and DescriptionTimeZone parameters are used in this example to specify formatting of the time and the time zone used in the rule's Description property.</maml:para>
        <maml:para />
        <maml:para>Get-InboxRule "ReceivedLastYear" -Mailbox joe@contoso.com -DescriptionTimeFormat "mm/dd/yyyy" -DescriptionTimeZone "Pacific Standard Time"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbox rules" entry in the Recipients Permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/b02ad57a-460a-4dc2-a521-788cd893c269(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>b09ac95b-ea07-41cf-9c69-95c215bfa02c
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-DeliveryAgentConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>The New-DeliveryAgentConnector cmdlet creates a delivery agent connector in your organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>DeliveryAgentConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-DeliveryAgentConnector</maml:name>
      <command:parameter required="True">
        <maml:name>AddressSpaces</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>DeliveryProtocol</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsScopedConnector</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConcurrentConnections</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessagesPerConnection</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SourceTransportServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddressSpaces</maml:name>
      <maml:description>
        <maml:para>The AddessSpaces parameter specifies the domain names for which this delivery agent connector is responsible. The syntax for entering an address space is as follows: &lt;AddressSpaceType&gt;:&lt;AddressSpace&gt;;&lt;AddressSpaceCost&gt;. You must enclose each address space in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeliveryProtocol</maml:name>
      <maml:description>
        <maml:para>The DeliveryProtocol parameter specifies the communication protocol that determines which delivery agents are responsible for servicing the connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the name of this delivery agent connector. The value for the Name parameter can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comment</maml:name>
      <maml:description>
        <maml:para>The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether the delivery agent connector is enabled.</maml:para>
        <maml:para>The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsScopedConnector</maml:name>
      <maml:description>
        <maml:para>The IsScopedConnector parameter specifies the availability of the connector to other Mailbox servers. If the value of this parameter is $false, the connector can be used by all Mailbox servers in your organization. If the value of this parameter is $true, the connector can only be used by Mailbox servers in the same Active Directory site. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConcurrentConnections</maml:name>
      <maml:description>
        <maml:para>The MaxConcurrentConnections parameter specifies the maximum number of concurrent connections this connector accepts from a specific IP address. The default value is 5.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxMessageSize</maml:name>
      <maml:description>
        <maml:para>The MaxMessageSize parameter specifies the maximum size of a message that's allowed to pass through this connector. When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes. The valid input range for this parameter is from 65536 through 2147483647 bytes. The default value is unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxMessagesPerConnection</maml:name>
      <maml:description>
        <maml:para>The MaxMessagesPerConnection parameter specifies the maximum number of messages this connector accepts per connection. The connector terminates the connection after this limit is reached, and the sending server has to initiate a new connection to send more messages. The default value is 20.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SourceTransportServers</maml:name>
      <maml:description>
        <maml:para>The SourceTransportServers parameter specifies the list of Mailbox servers that host this connector. You can specify more than one server by separating their names with commas.</maml:para>
        <maml:para>By default, only the local server on which the command is executed is added to this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a delivery agent connector named Contoso X.400 Connector with the following configuration:</maml:para>
        <maml:para />
        <maml:para>The delivery agent connector is hosted on the following servers:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Hub01</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Hub02</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Hub05</maml:para>
        </command:listItem></command:list>
        <maml:para>The delivery agent connector is designed to handle X.400 connections to a company called Contoso that uses the carrier Fabrikam.</maml:para>
        <maml:para>The address space for the connector is c=US;a=Fabrikam;p=Contoso.</maml:para>
        <maml:para>New-DeliveryAgentConnector -Name "Contoso X.400 Connector" -AddressSpaces "X400:c=US;a=Fabrikam;p=Contoso;1" -DeliveryProtocol "X.400" -SourceTransportServers Hub01,Hub02,Hub05</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Delivery agent connectors are used to route messages addressed to foreign systems that don't utilize the SMTP protocol. When a message is routed to a delivery agent connector, the associated delivery agent performs the content conversion and message delivery. Delivery agent connectors allow queue management of foreign connectors, thereby eliminating the need for storing messages on the file system in the Drop and Pickup directories. For more information, see Delivery agents and Delivery Agent connectors.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Delivery agent connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/b09ac95b-ea07-41cf-9c69-95c215bfa02c(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>b247f29c-868e-4a4e-a6ad-626715dbf2fc
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-DlpPolicyTemplate</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-DlpPolicyTemplate cmdlet to remove a data loss prevention (DLP) policy template from your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>DlpPolicyTemplate</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-DlpPolicyTemplate</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the DLP policy template you want to remove. You can use any value that uniquely identifies the DLP policy template. For example, you can specify the name, GUID, or distinguished name (DN) of the DLP policy template.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DlpPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the DLP policy template named External DLP Policy Template.</maml:para>
        <maml:para />
        <maml:para>Remove-DlpPolicyTemplate "External DLP Policy Template"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/b247f29c-868e-4a4e-a6ad-626715dbf2fc(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>b949297c-843b-4eb6-9e5e-378c84b841a3
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-MessageTrackingReport</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-MessageTrackingReport cmdlet to return data for a specific message tracking report. This cmdlet is used by the delivery reports feature.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>MessageTrackingReport</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-MessageTrackingReport</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MessageTrackingReportId</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassDelegateChecking</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DetailLevel</maml:name>
        <command:parameterValue required="True">Basic | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DoNotResolve</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientPathFilter</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Recipients</maml:name>
        <command:parameterValue required="True">String[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReportTemplate</maml:name>
        <command:parameterValue required="True">Summary | RecipientPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Status</maml:name>
        <command:parameterValue required="True">Unsuccessful | Pending | Delivered | Transferred | Read</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TraceLevel</maml:name>
        <command:parameterValue required="True">Low | Medium | High</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the ID of the message tracking report ID to retrieve.</maml:para>
        <maml:para>You should run the Search-MessageTrackingReport cmdlet to find the message tracking report ID for the specific message you're tracking, and then pass the value of the MessageTrackingReportID field to this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageTrackingReportId</command:parameterValue>
      <dev:type>
        <maml:name>MessageTrackingReportId</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BypassDelegateChecking</maml:name>
      <maml:description>
        <maml:para>The BypassDelegateChecking switch allows Help desk staff and administrators to retrieve message tracking reports for any user. You don't have to specify a value with this switch.</maml:para>
        <maml:para>By default, each user can only see the message tracking reports for messages sent or received by the user. When you use this switch, Exchange allows you to view the message tracking reports for message exchanges among other users.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DetailLevel</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DetailLevel parameter specifies the amount of detail to be displayed for the message tracking report. You can use one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Basic</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Verbose</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify Basic, simple delivery report information is displayed, which is more appropriate for information workers. If you specify Verbose, full report information is displayed, including server names and physical topology information.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Basic | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>Basic | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DoNotResolve</maml:name>
      <maml:description>
        <maml:para>The DoNotResolve switch prevents the resolution of email addresses to display names. This improves performance, but the end result may not be as easy to interpret because it's missing the display names. You don't have to specify a value with this switch.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientPathFilter</maml:name>
      <maml:description>
        <maml:para>The RecipientPathFilter parameter specifies the recipient for which the command returns the detailed tracking report.</maml:para>
        <maml:para>Use this parameter when you're using the RecipientPath report template.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Recipients</maml:name>
      <maml:description>
        <maml:para>The Recipients parameter specifies the recipients for whom you want to retrieve the message tracking data.</maml:para>
        <maml:para>You can use this parameter to specify the recipients in the report details if you're using the Summary report template.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String[]</command:parameterValue>
      <dev:type>
        <maml:name>String[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReportTemplate</maml:name>
      <maml:description>
        <maml:para>The ReportTemplate parameter specifies a predefined format for the output. You can either return a summary for all recipients or a detailed tracking report for one recipient. You can specify one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>RecipientPath</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Summary</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Summary | RecipientPath</command:parameterValue>
      <dev:type>
        <maml:name>Summary | RecipientPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the maximum number of results to return. If you want to return all requests that match the query, use unlimited for the value of this parameter. The default value is 1000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Status</maml:name>
      <maml:description>
        <maml:para>The Status parameter specifies the delivery status codes you're interested in. You can specify one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Delivered</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Read</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Pending</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Transferred</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Unsuccessful</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Unsuccessful | Pending | Delivered | Transferred | Read</command:parameterValue>
      <dev:type>
        <maml:name>Unsuccessful | Pending | Delivered | Transferred | Read</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TraceLevel</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The TraceLevel parameter specifies whether additional trace details are included in the output of the message tracking report. This parameter is intended to be used when troubleshooting message tracking issues.</maml:para>
        <maml:para>The acceptable values for the TraceLevel parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Low Minimal additional data is returned, including servers that were accessed, timing, message tracking search result counts, and any error information.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Medium In addition to the data returned for the Low setting, the actual message tracking search results are also returned.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>High Full diagnostic data is returned.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Low | Medium | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Medium | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example gets the message tracking report for messages sent from one user to another. This example returns the summary of the message tracking report for a message that David Jones sent to Wendy Richardson.</maml:para>
        <maml:para />
        <maml:para>$Temp = Search-MessageTrackingReport -Identity "David Jones" -Recipients "wendy@contoso.com"</maml:para>
        <maml:para>Get-MessageTrackingReport -Identity $Temp.MessageTrackingReportID -ReportTemplate Summary</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example gets the message tracking report for the following scenario: The user Cigdem Akin was expecting an email message from joe@contoso.com that never arrived. She contacted the Help desk, which needs to generate the message tracking report on behalf of Cigdem and doesn't need to see the display names.</maml:para>
        <maml:para />
        <maml:para>This example searches the message tracking data for the specific message tracking reports, and then returns detailed troubleshooting information for the specific recipient path.</maml:para>
        <maml:para />
        <maml:para>Search-MessageTrackingReport -Identity "Cigdem Akin" -Sender "joe@contoso.com" -ByPassDelegateChecking -DoNotResolve | ForEach-Object { Get-MessageTrackingReport -Identity $_.MessageTrackingReportID -DetailLevel Verbose -BypassDelegateChecking -DoNotResolve -RecipientPathFilter "cigdem@fabrikam.com" -ReportTemplate RecipientPath }</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-MessageTrackingReport cmdlet requires you to specify the ID for the message tracking report you want to view. Therefore, first you need to use the Search-MessageTrackingReport cmdlet to find the message tracking report ID for a specific message. You then pass the message tracking report ID from the output of the Search-MessageTrackingReport cmdlet to the Get-MessageTrackingReport cmdlet. For more information, see Search-MessageTrackingReport.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Message tracking" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/b949297c-843b-4eb6-9e5e-378c84b841a3(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>b96b4003-7c16-4039-a1f4-560ba6034cef
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-InboundConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Remove-InboundConnector cmdlet to delete an Inbound connector from your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>InboundConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-InboundConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">InboundConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the Inbound connector you want to remove.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InboundConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>InboundConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example deletes the Inbound connector named Contoso Inbound Connector.</maml:para>
        <maml:para />
        <maml:para>Remove-InboundConnector "Contoso Inbound Connector"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Inbound connectors accept email messages from remote domains that require specific configuration options.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbound and Outbound connectors" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/b96b4003-7c16-4039-a1f4-560ba6034cef(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>ba259260-ffd3-43f3-8ef4-9d8659679d02
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-HostedContentFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-HostedContentFilterRule cmdlet to modify the settings of content filter rules in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>HostedContentFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-HostedContentFilterRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comments</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HostedContentFilterPolicy</maml:name>
        <command:parameterValue required="True">HostedContentFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Priority</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the content filter rule that you want to modify. You can use any value that uniquely identifies the rule. For example, you can specify the name, GUID, or distinguished name (DN) of the content filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comments</maml:name>
      <maml:description>
        <maml:para>The Comments parameter specifies informative comments for the rule, such as what the rule is used for or how it has changed over time. The length of the comment can't exceed 1024 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientDomainIs parameter specifies the recipient's domain. The rule isn't applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentTo</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentTo parameter specifies a recipient. The rule isn't applied to messages sent to the specified recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentToMemberOf parameter specifies a distribution group. The rule isn't applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no exception is made.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HostedContentFilterPolicy</maml:name>
      <maml:description>
        <maml:para>The HostedContentFilterPolicy parameter specifies the content filter policy to apply to messages that match the conditions defined by this content filter rule.</maml:para>
        <maml:para>You can use any value that uniquely identifies the policy. For example, you can specify the name, GUID, or distinguished name (DN) of the content filter policy.</maml:para>
        <maml:para>You can't specify the default content filter policy. And, you can't specify a content filter policy that's already associated with another content filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HostedContentFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>HostedContentFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the content filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Priority</maml:name>
      <maml:description>
        <maml:para>The Priority parameter specifies the priority for this rule. Rules with a lower priority value are processed first. If you modify the priority of the rule, the position of the rule in the rule list changes to match the priority that you specified.</maml:para>
        <maml:para>The value of this parameter must be greater than or equal to 0, and must be one less than the total number of rules in your organization. For example, if you configured 8 rules, you can set this parameter to any value from 0 through 7.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The RecipientDomainIs parameter specifies the recipient's domain. The rule is applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentTo</maml:name>
      <maml:description>
        <maml:para>The SentTo parameter specifies a recipient. The rule is applied to messages sent to the specified recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The SentToMemberOf parameter specifies a distribution group. The rule is applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no action is taken.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example adds an exception to the content filter rule named Contoso Recipients for members of the distribution group named Contoso Human Resources.</maml:para>
        <maml:para />
        <maml:para>Set-HostedContentFilterRule "Contoso Recipients" -ExceptIfSentToMemberOf "Contoso Human Resources"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/ba259260-ffd3-43f3-8ef4-9d8659679d02(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>baef3e69-ff01-4e00-a4bb-e8826bbbf38b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-InboxRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-InboxRule cmdlet to modify an existing Inbox rule. Inbox rules are used to process messages in the Inbox based on conditions specified and take actions such as moving a message to a specified folder or deleting a message.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>InboxRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-InboxRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">InboxRuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AlwaysDeleteOutlookRulesBlob</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyCategory</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BodyContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CopyToFolder</maml:name>
        <command:parameterValue required="True">MailboxFolderIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeleteMessage</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfBodyContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFlaggedForAction</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFrom</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromAddressContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromSubscription</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdentity[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHasAttachment</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHasClassification</maml:name>
        <command:parameterValue required="True">MessageClassificationIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHeaderContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMessageTypeMatches</maml:name>
        <command:parameterValue required="True">AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMyNameInCcBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMyNameInToBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMyNameInToOrCcBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMyNameNotInToBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfReceivedAfterDate</maml:name>
        <command:parameterValue required="True">ExDateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfReceivedBeforeDate</maml:name>
        <command:parameterValue required="True">ExDateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentOnlyToMe</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectOrBodyContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfWithImportance</maml:name>
        <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfWithinSizeRangeMaximum</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfWithinSizeRangeMinimum</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfWithSensitivity</maml:name>
        <command:parameterValue required="True">Normal | Personal | Private | CompanyConfidential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FlaggedForAction</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForwardAsAttachmentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForwardTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>From</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromAddressContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromSubscription</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdentity[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HasAttachment</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HasClassification</maml:name>
        <command:parameterValue required="True">MessageClassificationIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HeaderContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsRead</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkImportance</maml:name>
        <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTypeMatches</maml:name>
        <command:parameterValue required="True">AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MoveToFolder</maml:name>
        <command:parameterValue required="True">MailboxFolderIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MyNameInCcBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MyNameInToBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MyNameInToOrCcBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MyNameNotInToBox</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Priority</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceivedAfterDate</maml:name>
        <command:parameterValue required="True">ExDateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReceivedBeforeDate</maml:name>
        <command:parameterValue required="True">ExDateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RedirectTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SendTextMessageNotificationTo</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentOnlyToMe</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>StopProcessingRules</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectOrBodyContainsWords</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithImportance</maml:name>
        <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithinSizeRangeMaximum</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithinSizeRangeMinimum</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithSensitivity</maml:name>
        <command:parameterValue required="True">Normal | Personal | Private | CompanyConfidential</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the Inbox rule to be modified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InboxRuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>InboxRuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AlwaysDeleteOutlookRulesBlob</maml:name>
      <maml:description>
        <maml:para>The AlwaysDeleteOutlookRulesBlob parameter suppresses a warning that end users or administrators get if they use Outlook Web App or Windows PowerShell to modify Inbox rules.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyCategory</maml:name>
      <maml:description>
        <maml:para>The ApplyCategory parameter specifies one or more categories to apply to a message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The BodyContainsWords parameter specifies one or more words or phrases to check the message body for. If phrases contain a space, you must enclose it in quotation marks ("). Use a comma to separate phrases.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CopyToFolder</maml:name>
      <maml:description>
        <maml:para>The CopyToFolder parameter specifies the name of an existing mailbox folder to copy the message to.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxFolderIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxFolderIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeleteMessage</maml:name>
      <maml:description>
        <maml:para>The DeleteMessage parameter specifies whether the message is sent to the Deleted Items folder. If set to $true, the DeleteMessage parameter specifies that the message is sent to the Deleted Items folder.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfBodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfBodyContainsWords parameter specifies one or more words or phrases to check the message body for. If the message body contains the specified words or phrases, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFlaggedForAction</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFlaggedForAction parameter specifies one or more message flags to check the message for. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Any</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Call</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DoNotForward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FollowUp</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ForYourInformation</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Forward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NoResponseNecessary</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Read</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Reply</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReplyToAll</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Review</maml:para>
        </command:listItem></command:list>
        <maml:para>If the requested action in the message matches the requested action specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFrom</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFrom parameter specifies one or more senders. If the message sender matches the senders specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFromAddressContainsWords parameter specifies one or more words to check the sender's address for. If the sender's address contains the specified words, the Inbox rule action isn't applied to the message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromSubscription</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The ExceptIfFromSubscription parameter specifies an exception when a message is received from a POP, IMAP, or Hotmail subscription.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdentity[]</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdentity[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHasAttachment</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHasAttachment parameter specifies whether the message has attachments. Valid values include $true and $false. We recommend you set the value to $true.</maml:para>
        <maml:para>If the message has an attachment, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHasClassification</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHasClassification parameter checks the message for the specified classification name. Use the Get-MessageClassification cmdlet to retrieve a list of classifications defined in the organization.</maml:para>
        <maml:para>If the message classification matches the classification specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageClassificationIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>MessageClassificationIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHeaderContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHeaderContainsWords parameter specifies one or more values for a header.</maml:para>
        <maml:para>If the message header contains the words specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMessageTypeMatches</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMessageTypeMatches parameter specifies a message type. Valid values include one of the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AutomaticReply</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AutomaticForward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Encrypted</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Calendaring</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CalendaringResponse</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PermissionControlled</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Voicemail</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Signed</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ApprovalRequest</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReadReceipt</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NonDeliveryReport</maml:para>
        </command:listItem></command:list>
        <maml:para>If the message type equals one of the preceding values, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</command:parameterValue>
      <dev:type>
        <maml:name>AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMyNameInCcBox</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMyNameInCcBox parameter specifies that the Cc field of messages is checked for the mailbox owner's address.</maml:para>
        <maml:para>If the name of the recipient whose Inbox is being edited is in the Cc box, the Inbox rule action isn't applied.</maml:para>
        <maml:para>This parameter accepts $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMyNameInToBox</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMyNameInToBox parameter specifies that the To field of messages is checked for the mailbox owner's address.</maml:para>
        <maml:para>If the name of the recipient whose Inbox is being edited is in the To box, the Inbox rule action isn't applied.</maml:para>
        <maml:para>This parameter accepts $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMyNameInToOrCcBox</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMyNameInToOrCcBox parameter specifies that the To or Cc field of messages is checked for the mailbox owner's address.</maml:para>
        <maml:para>If the name of the recipient whose Inbox is being edited is in the To or Cc box, the Inbox rule action isn't applied.</maml:para>
        <maml:para>This parameter accepts $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMyNameNotInToBox</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMyNameNotInToBox parameter matches messages where the mailbox owner isn't addressed in the To field of the message.</maml:para>
        <maml:para>If the name of the recipient whose Inbox is being edited isn't in the To box, the Inbox rule action isn't applied.</maml:para>
        <maml:para>This parameter accepts $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfReceivedAfterDate</maml:name>
      <maml:description>
        <maml:para>The ExceptIfReceivedAfterDate parameter specifies to check for messages received after the specified date.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
        <maml:para>If the message was received after the date specified, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExDateTime</command:parameterValue>
      <dev:type>
        <maml:name>ExDateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfReceivedBeforeDate</maml:name>
      <maml:description>
        <maml:para>The ExceptIfReceivedBeforeDate parameter specifies to check for messages received before the specified date.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
        <maml:para>If the message was received before the time specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExDateTime</command:parameterValue>
      <dev:type>
        <maml:name>ExDateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientAddressContainsWords parameter specifies one or more words to check in the message recipient's address.</maml:para>
        <maml:para>If the recipient address contains one or more words specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentOnlyToMe</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentOnlyToMe parameter specifies to check for messages where the mailbox owner is the only recipient.</maml:para>
        <maml:para>This parameter accepts $true or $false.</maml:para>
        <maml:para>If the message is only sent to the recipient whose Inbox rule is being edited, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentTo</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentTo parameter specifies to check message recipients for the recipient specified.</maml:para>
        <maml:para>If the message is sent to the recipient specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectContainsWords parameter specifies one or more words or phrases to check in the message subject.</maml:para>
        <maml:para>If the message subject contains one or more words or phrases specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectOrBodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectOrBodyContainsWords parameter specifies one or more words or phrases to check in the message subject or body.</maml:para>
        <maml:para>If the message subject or body contains one or more of the words or phrases specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfWithImportance</maml:name>
      <maml:description>
        <maml:para>The ExceptIfWithImportance parameter checks the message for the specified importance level. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>High</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Low</maml:para>
        </command:listItem></command:list>
        <maml:para>If the message importance matches the importance specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Normal | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfWithinSizeRangeMaximum</maml:name>
      <maml:description>
        <maml:para>The ExceptIfWithinSizeRangeMaximum parameter specifies a maximum message size. When using this parameter, you must also specify the minimum message size using the ExceptIfWithinSizeRangeMinimum parameter.</maml:para>
        <maml:para>If the message size exceeds the maximum value specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfWithinSizeRangeMinimum</maml:name>
      <maml:description>
        <maml:para>The ExceptIfWithinSizeRangeMinimum parameter specifies a minimum message size. When using this parameter, you must also specify the maximum message size using the ExceptIfWithinSizeRangeMaximum parameter.</maml:para>
        <maml:para>If the message size is smaller than the minimum value specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfWithSensitivity</maml:name>
      <maml:description>
        <maml:para>The ExceptIfWithSensitivity parameter checks messages for the specified sensitivity level. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Personal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Private</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CompanyConfidential</maml:para>
        </command:listItem></command:list>
        <maml:para>If the sensitivity matches the sensitivity value specified in this parameter, the Inbox rule action isn't applied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Normal | Personal | Private | CompanyConfidential</command:parameterValue>
      <dev:type>
        <maml:name>Normal | Personal | Private | CompanyConfidential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FlaggedForAction</maml:name>
      <maml:description>
        <maml:para>The FlaggedForAction parameter specifies one or more message flags to check the message for. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Any</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Call</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DoNotForward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FollowUp</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ForYourInformation</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Forward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NoResponseNecessary</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Read</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Reply</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReplyToAll</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Review</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress the confirmation prompt produced if rules created by Outlook exist on the mailbox. When taking an action using Inbox rules on Exchange 2013, any client-side rules are removed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ForwardAsAttachmentTo</maml:name>
      <maml:description>
        <maml:para>The ForwardAsAttachmentTo parameter specifies a recipient to forward the message to as an attachment.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ForwardTo</maml:name>
      <maml:description>
        <maml:para>The ForwardTo parameter specifies the identity of a recipient to forward the message to.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>From</maml:name>
      <maml:description>
        <maml:para>The From parameter specifies the identity of the sender as a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The FromAddressContainsWords parameter specifies one or more words to check in the From address of the message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromSubscription</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The FromSubscription parameter specifies the condition when a message is received from a POP, IMAP, or Hotmail, subscription.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdentity[]</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdentity[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HasAttachment</maml:name>
      <maml:description>
        <maml:para>The HasAttachment parameter specifies whether to check for messages with attachments.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HasClassification</maml:name>
      <maml:description>
        <maml:para>The HasClassification parameter checks messages for the specified message classification.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageClassificationIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>MessageClassificationIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HeaderContainsWords</maml:name>
      <maml:description>
        <maml:para>The HeaderContainsWords parameter specifies one or more words to match in the specified message header.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the identity of the mailbox for which the new rule is being created. You can use the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Domain\Account</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User principal name (UPN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SmtpAddress</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsRead</maml:name>
      <maml:description>
        <maml:para>The MarkAsRead parameter specifies whether to mark the message as read. When set to $true, the MarkAsRead parameter marks the message as read.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkImportance</maml:name>
      <maml:description>
        <maml:para>The MarkImportance parameter specifies that the message importance be marked with one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Low</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>High</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Normal | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTypeMatches</maml:name>
      <maml:description>
        <maml:para>The MessageTypeMatches parameter specifies a message type to apply the rule to. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AutomaticReply</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AutomaticForward</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Encrypted</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Calendaring</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CalendaringResponse</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PermissionControlled</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Voicemail</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Signed</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ApprovalRequest</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReadReceipt</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NonDeliveryReport</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</command:parameterValue>
      <dev:type>
        <maml:name>AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MoveToFolder</maml:name>
      <maml:description>
        <maml:para>The MoveToFolder parameter specifies an existing mailbox folder to which the message is copied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxFolderIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxFolderIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MyNameInCcBox</maml:name>
      <maml:description>
        <maml:para>The MyNameInCcBox parameter specifies that the mailbox for which the rule is being created should appear in the Cc field of the message. To use this predicate, set the value to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MyNameInToBox</maml:name>
      <maml:description>
        <maml:para>The MyNameInToBox parameter specifies that the mailbox for which the rule is being created should appear in the To field of the message. To use this predicate, set the value to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MyNameInToOrCcBox</maml:name>
      <maml:description>
        <maml:para>The MyNameInToOrCcBox parameter specifies that the mailbox for which the rule is being created should appear in the To or Cc fields of the message. To add this condition, set the value to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MyNameNotInToBox</maml:name>
      <maml:description>
        <maml:para>The MyNameNotInToBox parameter specifies that the mailbox for which the rule is being created should not appear in the To field of the message. To use this predicate, set the value to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a name for the Inbox rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Priority</maml:name>
      <maml:description>
        <maml:para>The Priority parameter specifies a priority for the Inbox rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceivedAfterDate</maml:name>
      <maml:description>
        <maml:para>The ReceivedAfterDate parameter specifies a date. The rule is applied to messages received after the specified date.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExDateTime</command:parameterValue>
      <dev:type>
        <maml:name>ExDateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReceivedBeforeDate</maml:name>
      <maml:description>
        <maml:para>The ReceivedBeforeDate parameter specifies a date. The rule is applied only to messages received before the specified date.</maml:para>
        <maml:para>Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExDateTime</command:parameterValue>
      <dev:type>
        <maml:name>ExDateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The RecipientAddressContainsWords parameter specifies one or more words to check for in the recipient address.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RedirectTo</maml:name>
      <maml:description>
        <maml:para>The RedirectTo parameter specifies a recipient to redirect the message to.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SendTextMessageNotificationTo</maml:name>
      <maml:description>
        <maml:para>The SendTextMessageNotificationTo parameter specifies one or more text message recipients to send a notification to.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentOnlyToMe</maml:name>
      <maml:description>
        <maml:para>The SentOnlyToMe parameter specifies whether a message is sent only to the mailbox owner.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentTo</maml:name>
      <maml:description>
        <maml:para>The SentTo parameter specifies the identity of a recipient as a condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>StopProcessingRules</maml:name>
      <maml:description>
        <maml:para>The StopProcessingRules parameter specifies whether Exchange stops processing additional rules if the conditions of this Inbox rule are met. If set to $true, the StopProcessingRules parameter instructs Exchange to stop processing additional rules if the conditions of this Inbox rule are met.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectContainsWords</maml:name>
      <maml:description>
        <maml:para>The SubjectContainsWords parameter specifies one or more keywords to be matched in the subject field of a message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectOrBodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The SubjectOrBodyContainsWords parameter specifies one or more words to be matched in the message subject or body.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WithImportance</maml:name>
      <maml:description>
        <maml:para>The WithImportance parameter specifies that messages with the specified importance level are checked. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>High</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Low</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Normal | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WithinSizeRangeMaximum</maml:name>
      <maml:description>
        <maml:para>The WithinSizeRangeMaximum parameter specifies the maximum message size. When using this parameter, you must also specify a minimum message size value using the WithinSizeRangeMinimum parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WithinSizeRangeMinimum</maml:name>
      <maml:description>
        <maml:para>The WithinSizeRangeMinimum parameter specifies the minimum message size. When using this parameter, you must also specify a maximum message size value using the WithinSizeRangeMaximum parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WithSensitivity</maml:name>
      <maml:description>
        <maml:para>The WithSensitivity parameter specifies a message sensitivity level. Valid values include one of the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Personal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Private</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CompanyConfidential</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Normal | Personal | Private | CompanyConfidential</command:parameterValue>
      <dev:type>
        <maml:name>Normal | Personal | Private | CompanyConfidential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the action of the existing Inbox rule ProjectContoso. The MarkImportance parameter is used to mark the message with high importance.</maml:para>
        <maml:para />
        <maml:para>Set-InboxRule ProjectContoso -MarkImportance "High"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Set-InboxRule cmdlet exposes rule predicates and actions, in addition to the parameters such as a rule name and the mailbox identity, required to create an Inbox rule.</maml:para>
    <maml:para>When you create, modify, remove, enable, or disable an Inbox rule on Microsoft Exchange Server 2013, some client-side rules including disabled client-side rules and outbound rules that were created by Microsoft Outlook are removed.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbox rules" entry in the Recipients Permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/baef3e69-ff01-4e00-a4bb-e8826bbbf38b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>bcedb558-4caf-482f-8be3-30e1793ba103
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-TransportService</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-TransportService cmdlet to view the transport configuration information for the Transport service on Mailbox servers or for Edge Transport servers.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>TransportService</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-TransportService</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">TransportServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server you want to view. When you use this parameter on a Mailbox server, the parameter returns the transport configuration of the Transport service on the specified server. You can't use this parameter on an Edge Transport server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TransportServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>TransportServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example provides different results depending on the server role on which it's run. When you run this command on an Edge Transport server, it provides a configuration summary for the local server. Otherwise, it displays a list of all Mailbox servers in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-TransportService</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves the detailed transport configuration information for the Transport service on the Mailbox server named Mailbox1.</maml:para>
        <maml:para />
        <maml:para>Get-TransportService Mailbox1 | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport service" or "Edge Transport server" entries in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/bcedb558-4caf-482f-8be3-30e1793ba103(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>bd751db2-3f26-495b-8e5a-4fcab53b17fd
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-HostedConnectionFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-HostedConnectionFilterPolicy cmdlet to view the settings of connection filter policies in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>HostedConnectionFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-HostedConnectionFilterPolicy</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">HostedConnectionFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the connection filter policy that you want to view. You can use any value that uniquely identifies the policy. For example, you can specify the name, GUID, or distinguished name (DN) of the connection filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HostedConnectionFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>HostedConnectionFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows a summary list of all the connection filter policies in your cloud-based organization</maml:para>
        <maml:para />
        <maml:para>Get-HostedConnectionFilterPolicy</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves details about the connection filter policy named Default.</maml:para>
        <maml:para />
        <maml:para>Get-HostedConnectionFilterPolicy Default | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/bd751db2-3f26-495b-8e5a-4fcab53b17fd(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>beba3ca3-6f93-49c5-9ddf-505260655bed
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-OutboundConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-OutboundConnector cmdlet to modify an existing Outbound connector in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>OutboundConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-OutboundConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OutboundConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AllAcceptedDomains</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassValidation</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CloudServicesMailEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectorSource</maml:name>
        <command:parameterValue required="True">Default | Migrated | HybridWizard</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectorType</maml:name>
        <command:parameterValue required="True">OnPremises | Partner</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsTransportRuleScoped</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientDomains</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RouteAllMessagesViaOnPremises</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmartHosts</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsDomain</maml:name>
        <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsSettings</maml:name>
        <command:parameterValue required="True">EncryptionOnly | CertificateValidation | DomainValidation</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UseMXRecord</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the connector you want to modify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OutboundConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OutboundConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AllAcceptedDomains</maml:name>
      <maml:description>
        <maml:para>When this parameter is set to $true, the connector applies to all accepted domains.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BypassValidation</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CloudServicesMailEnabled</maml:name>
      <maml:description>
        <maml:para>Set to $true to enable this connector to deliver messages to the cloud service.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comment</maml:name>
      <maml:description>
        <maml:para>The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectorSource</maml:name>
      <maml:description>
        <maml:para>The ConnectorSource parameter specifies how the connector is created. Valid input for this parameter includes the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Default: The connector is manually created.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HybridWizard: The connector is automatically created by the Hybrid Configuration Wizard.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Migrated: The connector was originally created in Microsoft Forefront Online Protection for Exchange.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value for connectors you create yourself is Default. It isn't recommended that you change this value.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Default | Migrated | HybridWizard</command:parameterValue>
      <dev:type>
        <maml:name>Default | Migrated | HybridWizard</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectorType</maml:name>
      <maml:description>
        <maml:para>The ConnectorType parameter specifies a category for the domains that are serviced by the connector. Valid input for this parameter includes the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Partner: The connector services domains that are external to your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OnPremises: The connector services domains that are used by your on-premises organization.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">OnPremises | Partner</command:parameterValue>
      <dev:type>
        <maml:name>OnPremises | Partner</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter enables or disables the connector. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsTransportRuleScoped</maml:name>
      <maml:description>
        <maml:para>The IsTransportRuleScoped parameter associates the Outbound connector with a transport rule. Valid input for this parameter is $true or $false.</maml:para>
        <maml:para>A transport rule is scoped to a specific Outbound connector using the RouteMessageOutboundConnector parameter on the New-TransportRule or Set-TransportRule cmdlets. Messages that match the conditions of the transport rule are routed to their destinations using the specified Outbound connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a descriptive name for the connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientDomains</maml:name>
      <maml:description>
        <maml:para>The RecipientDomains parameter specifies the domain names to which the Outbound connector routes mail. You can use a wildcard character to specify all subdomains of a specified domain, as shown in the following example: *.contoso.com. However, you can't embed a wildcard character, as shown in the following example: domain.*.contoso.com.You can specify multiple domains separated by commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RouteAllMessagesViaOnPremises</maml:name>
      <maml:description>
        <maml:para>The RouteAllMessagesViaOnPremises parameter indicates all messages serviced by this connector are first routed through the on-premises messaging system. Valid input for this parameter is $true or $false. The default value is $false. If you set RouteAllMessagesViaOnPremises to $true, you must set the value of the ConnectorType parameter to OnPremises in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmartHosts</maml:name>
      <maml:description>
        <maml:para>The SmartHosts parameter specifies the smart hosts the Outbound connector uses to route mail. This parameter is required if you set the UseMxRecord parameter to $false and must be specified on the same command line. The SmartHosts parameter takes one or more FQDNs, such as server.contoso.com, or one or more IP addresses, or a combination of both FQDNs and IP addresses. Separate each value by using a comma. If you enter an IP address, you may enter the IP address as a literal, for example: 10.10.1.1, or using Classless InterDomain Routing (CIDR), for example, 192.168.0.1/25. The smart host identity can be the FQDN of a smart host server, a mail exchange (MX) record, or an address (A) record.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsDomain</maml:name>
      <maml:description>
        <maml:para>The TlsDomain parameter specifies the domain name that the Outbound connector uses to verify the FQDN of the target certificate when establishing a TLS secured connection. This parameter is only used if the TlsSettings parameter is set to DomainValidation. Valid input for the TlsDomain parameter is an SMTP domain. You can use a wildcard character to specify all subdomains of a specified domain, as shown in the following example: *.contoso.com. However, you can't embed a wildcard character, as shown in the following example: domain.*.contoso.com</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      <dev:type>
        <maml:name>SmtpDomainWithSubdomains</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsSettings</maml:name>
      <maml:description>
        <maml:para>The TlsSettings parameter specifies the TLS authentication level that's used for outbound TLS connections established by this Outbound connector. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>EncryptionOnly TLS is used only to encrypt the communication channel. No certificate authentication is performed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CertificateValidation TLS is used to encrypt the channel and certificate chain validation and revocation lists checks are performed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DomainValidation In addition to channel encryption and certificate validation, the Outbound connector also verifies that the FQDN of the target certificate matches the domain specified in the TlsDomain parameter.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">EncryptionOnly | CertificateValidation | DomainValidation</command:parameterValue>
      <dev:type>
        <maml:name>EncryptionOnly | CertificateValidation | DomainValidation</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UseMXRecord</maml:name>
      <maml:description>
        <maml:para>The UseMXRecord parameter enables or disables DNS routing for the connector. Valid input for this parameter is $true or $false. The default value is $true. To bypass DNS routing and use a smart host as the destination for the connector, set the value of UseMXRecord to $false and specify the FQDN or IP address of the smart host using the SmartHosts parameter in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example changes the settings of the existing Outbound connector named Contoso Outbound Connector to route to a smart host at IP address 192.168.0.1.</maml:para>
        <maml:para />
        <maml:para>Set-OutboundConnector "Contoso Outbound Connector" -UseMxRecord $false -SmartHosts 192.168.0.1</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Outbound connectors send email messages to remote domains that require specific configuration options.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbound and Outbound connectors" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/beba3ca3-6f93-49c5-9ddf-505260655bed(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>bfdb6ced-cd81-49f1-a929-4d76dbaf5590
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Export-TransportRuleCollection</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Export-TransportRuleCollection cmdlet to export the transport rules in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Export</command:verb>
    <command:noun>TransportRuleCollection</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Export-TransportRuleCollection</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>This parameter has been deprecated and is no longer used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example exports transport rules. Rule data is first exported to the variable $file, and then written to the XML file Rules.xml in the C:\MyDocs folder.</maml:para>
        <maml:para />
        <maml:para>$file = Export-TransportRuleCollection</maml:para>
        <maml:para>Set-Content -Path "C:\MyDocs\Rules.xml" -Value $file.FileData -Encoding Byte</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Export-TransportRuleCollection cmdlet can be used to export the transport rule collection in your organization. The format of the exported transport rule collection has changed in Exchange Server 2013. The new format can only be imported into Exchange Server 2013: it can't be imported into older versions of Exchange.</maml:para>
    <maml:para>Exporting the rules collection is a two-step process. You first export the rules collection to a variable, and then use the Set-Content cmdlet to write the data to an XML file. For more information, see Set-Content (http://go.microsoft.com/fwlink/p/?linkId=156132).</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport rules" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/bfdb6ced-cd81-49f1-a929-4d76dbaf5590(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>c15f872c-af1b-48ca-b95d-cca1b0a78977
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Resume-Message</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Resume-Message cmdlet to enable delivery of a previously suspended message in a queue on a Mailbox server or Edge Transport server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Resume</command:verb>
    <command:noun>Message</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Resume-Message</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MessageIdentity</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Resume-Message</maml:name>
      <command:parameter required="True">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter specifies one or more messages by using OPath filter syntax. The OPath filter includes a message property name followed by a comparison operator and value, for example, {FromAddress -like "*@contoso.com"}. For details about filterable message properties and comparison operators, see Message filters and Use the Exchange Management Shell to manage queues.</maml:para>
        <maml:para>You can specify multiple criteria by using the and comparison operator. Property values that aren't expressed as an integer must be enclosed in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the message. Valid input for this parameter uses the syntax Server\Queue\MessageInteger or Queue\MessageInteger or MessageInteger, for example, Mailbox01\contoso.com\5 or 10. For details about message identity, see the "Message identity" section in Use the Exchange Management Shell to manage queues.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageIdentity</command:parameterValue>
      <dev:type>
        <maml:name>MessageIdentity</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
        <maml:para>You can use the Server parameter and the Filter parameter in the same command. You can't use the Server parameter and the Identity parameter in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example resumes delivery of all messages in a suspended state and for which the following conditions are true:</maml:para>
        <maml:para />
        <maml:para>The messages were sent by the sender kweku@contoso.com.</maml:para>
        <maml:para>The messages are queued on the server Server1.</maml:para>
        <maml:para>The messages will expire before 15:00 on January 5, 2013.</maml:para>
        <maml:para>Resume-Message -Server Server1 -Filter {FromAddress -eq "kweku@contoso.com" -and ExpirationTime -lt "1/5/2013 3:00 PM"}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>A message being sent to multiple recipients might be located in multiple queues. If you specify an Identity parameter, the message is resumed in a single queue if that identity matches only a single message. If the identity matches more than one message, you receive an error. To resume a message in more than one queue in a single operation, you must use the Filter parameter.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/c15f872c-af1b-48ca-b95d-cca1b0a78977(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>c1f8dafc-ef5d-47e3-b0fb-71a88e145fc5
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Disable-HostedContentFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Disable-HostedContentFilterRule cmdlet to disable content filter rules in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Disable</command:verb>
    <command:noun>HostedContentFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Disable-HostedContentFilterRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the content filter rule that you want to disable. You can use any value that uniquely identifies the rule. For example, you can specify the name, GUID, or distinguished name (DN) of the content filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example disables the enabled content filter rule named Contoso Recipients.</maml:para>
        <maml:para />
        <maml:para>Disable-HostedContentFilterRule "Contoso Recipients"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/c1f8dafc-ef5d-47e3-b0fb-71a88e145fc5(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>c7b369b6-fce1-4e60-ba6b-183fec700660
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-DeliveryAgentConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-DeliveryAgentConnector cmdlet to retrieve information about a specific delivery agent connector in your organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>DeliveryAgentConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-DeliveryAgentConnector</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DeliveryAgentConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the GUID or name of the delivery agent connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DeliveryAgentConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DeliveryAgentConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example reads the configuration of the delivery agent connector named Contoso X.400 Connector from Active Directory and displays all of its properties in a list format.</maml:para>
        <maml:para />
        <maml:para>Get-DeliveryAgentConnector "Contoso X.400 Connector" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves a list of all delivery agent connectors in your organization and displays their names and delivery protocols in a table format.</maml:para>
        <maml:para />
        <maml:para>Get-DeliveryAgentConnector | Format-Table Name,DeliveryProtocol</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Delivery agent connectors are used to route messages addressed to foreign systems that don't use the SMTP protocol. When a message is routed to a delivery agent connector, the associated delivery agent performs the content conversion and message delivery. Delivery agent connectors allow queue management of foreign connectors, thereby eliminating the need for storing messages on the file system in Drop and Pickup directories. For more information, see Delivery agents and Delivery Agent connectors.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Delivery agent connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/c7b369b6-fce1-4e60-ba6b-183fec700660(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>c7f17296-5489-4e93-ae15-743ba4644efd
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Search-MessageTrackingReport</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Search-MessageTrackingReport cmdlet to find the unique message tracking report based on the search criteria provided. You can then pass this message tracking report ID to the Get-MessageTrackingReport cmdlet to get full message tracking information. For more information, see Get-MessageTrackingReport. The message tracking report cmdlets are used by the delivery reports feature.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Search</command:verb>
    <command:noun>MessageTrackingReport</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Search-MessageTrackingReport</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassDelegateChecking</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DoNotResolve</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageEntryId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Recipients</maml:name>
        <command:parameterValue required="True">SmtpAddress[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Subject</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TraceLevel</maml:name>
        <command:parameterValue required="True">Low | Medium | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Search-MessageTrackingReport</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Sender</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassDelegateChecking</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DoNotResolve</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageEntryId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Subject</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TraceLevel</maml:name>
        <command:parameterValue required="True">Low | Medium | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the mailbox for whom the message tracking report is being searched. The message tracking report only contains the tracking events related to the specified mailbox.</maml:para>
        <maml:para>This parameter accepts the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
          <maml:para>Example: JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Canonical DN</maml:para>
          <maml:para>Example: Atlanta.Corp.Contoso.Com/Users/JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display Name</maml:para>
          <maml:para>Example: Jeff Phillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished Name (DN)</maml:para>
          <maml:para>Example: CN=JPhillips,CN=Users,DC=Atlanta,DC=Corp,DC=contoso,DC=com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Domain\Account</maml:para>
          <maml:para>Example: Atlanta\JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
          <maml:para>Example: fb456636-fe7d-4d58-9d15-5af57d0354c2</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Immutable ID</maml:para>
          <maml:para>Example: fb456636-fe7d-4d58-9d15-5af57d0354c2@contoso.com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Legacy Exchange DN</maml:para>
          <maml:para>Example: /o=Contoso/ou=AdministrativeGroup/cn=Recipients/cn=JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SMTP Address</maml:para>
          <maml:para>Example: Jeff.Phillips@contoso.com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User Principal Name</maml:para>
          <maml:para>Example: JPhillips@contoso.com</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Sender</maml:name>
      <maml:description>
        <maml:para>The Sender parameter specifies the email address of the message sender.</maml:para>
        <maml:para>By default, this command searches for messages sent by the user specified in the Identity parameter. If you want to search the message tracking report for a message sent to the user, you must specify the email address of the sender of that message using this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BypassDelegateChecking</maml:name>
      <maml:description>
        <maml:para>The BypassDelegateChecking switch allows Help desk staff and administrators to track messages for any user. End-users can only track messages that they send or receive. You don't have to specify a value with this switch.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DoNotResolve</maml:name>
      <maml:description>
        <maml:para>The DoNotResolve switch prevents the resolution of email addresses to display names. This improves performance, but the end result may not be as easy to interpret because it's missing the display names. You don't have to specify a value with this switch.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageEntryId</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageId</maml:name>
      <maml:description>
        <maml:para>The MessageId parameter specifies the Internet message ID of the message for which you want to get the tracking report.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Recipients</maml:name>
      <maml:description>
        <maml:para>The Recipients parameter specifies the recipients for whom you want to get the tracking report.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress[]</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the maximum number of results to return. If you want to return all requests that match the query, use unlimited for the value of this parameter. The default value is 1000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Subject</maml:name>
      <maml:description>
        <maml:para>The Subject parameter specifies text to be used to track messages that have the specified text in their subject lines.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TraceLevel</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The TraceLevel parameter specifies whether additional trace details will be included in the output of the message tracking report. This parameter is intended to be used when troubleshooting message tracking issues.</maml:para>
        <maml:para>The acceptable values for the TraceLevel parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Low Minimal additional data is returned, including servers that were accessed, timing, message tracking search result counts, and any error information.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Medium In addition to all the data returned for the Low setting, the actual message tracking search results are also returned.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>High Full diagnostic data is returned.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Low | Medium | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Medium | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example searches the message tracking report for messages sent from one user to another. This example returns the message tracking report for a message that David Jones sent to Wendy Richardson.</maml:para>
        <maml:para />
        <maml:para>Search-MessageTrackingReport -Identity "David Jones" -Recipients "wendy@contoso.com"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example searches the message tracking report for the following scenario: The user Cigdem Akin was expecting an email message from joe@contoso.com that never arrived. She contacted the Help desk, which needs to generate the message tracking report on behalf of Cigdem and doesn't need to see the display names.</maml:para>
        <maml:para />
        <maml:para>This example returns the message tracking reports that the Help desk can analyze to resolve the issue.</maml:para>
        <maml:para />
        <maml:para>Search-MessageTrackingReport -Identity "Cigdem Akin" -Sender "joe@contoso.com" -BypassDelegateChecking -DoNotResolve</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Message tracking" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/c7f17296-5489-4e93-ae15-743ba4644efd(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>c8d0cba8-a8cb-41dc-b3fe-11d5882e425b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-InboundConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the New-InboundConnector cmdlet to create a new Inbound connector in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>InboundConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-InboundConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>SenderDomains</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AssociatedAcceptedDomains</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassValidation</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CloudServicesMailEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectorSource</maml:name>
        <command:parameterValue required="True">Default | Migrated | HybridWizard</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectorType</maml:name>
        <command:parameterValue required="True">OnPremises | Partner</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireTls</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RestrictDomainsToCertificate</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RestrictDomainsToIPAddresses</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderIPAddresses</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsSenderCertificateName</maml:name>
        <command:parameterValue required="True">TlsCertificate</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a descriptive name for the connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderDomains</maml:name>
      <maml:description>
        <maml:para>The SenderDomains parameter specifies the remote domains from which this connector accepts messages, thereby limiting its scope. You can use a wildcard character to specify all subdomains of a specified domain, as shown in the following example: *.contoso.com. However, you can't embed a wildcard character, as shown in the following example: domain.*.contoso.com. You can specify multiple domains separated by commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AssociatedAcceptedDomains</maml:name>
      <maml:description>
        <maml:para>The AssociatedAcceptedDomains parameter specifies the accepted domains that the connector applies to, thereby limiting its scope. For example, you can apply the connector to a specific accepted domain in your organization, such as contoso.com.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BypassValidation</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CloudServicesMailEnabled</maml:name>
      <maml:description>
        <maml:para>Set to $true to enable this connector to receive messages from the cloud service.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comment</maml:name>
      <maml:description>
        <maml:para>The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectorSource</maml:name>
      <maml:description>
        <maml:para>The ConnectorSource parameter specifies how the connector is created. Valid input for this parameter includes the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Default The connector is manually created.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HybridWizard The connector is automatically created by the Hybrid Configuration Wizard.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Migrated The connector was originally created in Microsoft Forefront Online Protection for Exchange.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value for connectors you create yourself is Default. It isn't recommended that you change this value.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Default | Migrated | HybridWizard</command:parameterValue>
      <dev:type>
        <maml:name>Default | Migrated | HybridWizard</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectorType</maml:name>
      <maml:description>
        <maml:para>The ConnectorType parameter specifies a category for the domains that are serviced by the connector. Valid input for this parameter includes the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Partner The connector services domains that are external to your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OnPremises The connector services domains that are used by your on-premises organization. Use this value for accepted domains in your cloud-based organization that are also specified by the SenderDomains parameter.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">OnPremises | Partner</command:parameterValue>
      <dev:type>
        <maml:name>OnPremises | Partner</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter enables or disables the connector. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequireTls</maml:name>
      <maml:description>
        <maml:para>The RequireTLS parameter specifies that all messages received by this connector require TLS transmission. Valid values for this parameter are $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RestrictDomainsToCertificate</maml:name>
      <maml:description>
        <maml:para>The RestrictDomainsToCertificate parameter, when set to $true, causes the connector to reject mail that originates from a namespace not specified by the SenderDomains parameter.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RestrictDomainsToIPAddresses</maml:name>
      <maml:description>
        <maml:para>The RestrictDomainsToIPAddresses parameter, when set to $true, automatically rejects mail from the domains specified by the SenderDomains parameter if the mail originates from an IP address that isn't specified by the SenderIPAddresses parameter.</maml:para>
        <maml:para>Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderIPAddresses</maml:name>
      <maml:description>
        <maml:para>The SenderIPAddresses parameter specifies the remote IP addresses from which this connector accepts messages. You enter the IP addresses using the following syntax:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Single IP For example, 192.168.1.1.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CIDR IP You can use Classless InterDomain Routing (CIDR), for example, 192.168.0.1/25.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can specify multiple IP address separated by commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsSenderCertificateName</maml:name>
      <maml:description>
        <maml:para>The TlsSenderCertificateName parameter specifies the certificate used by the sender's domain when the RequireTls parameter is set to $true. Valid input for the TlsSenderCertificateName parameter is an SMTP domain. You can use a wildcard character to specify all subdomains of a specified domain, as shown in the following example: *.contoso.com.</maml:para>
        <maml:para>You can't embed a wildcard character, as shown in the following example: domain.*.contoso.com.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">TlsCertificate</command:parameterValue>
      <dev:type>
        <maml:name>TlsCertificate</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the Inbound connector named Contoso Inbound Connector with the following properties:</maml:para>
        <maml:para />
        <maml:para>It listens for incoming connections from the domain contoso.com and all subdomains.</maml:para>
        <maml:para>It only accepts mail from contoso.com, and from the IP range 192.168.0.1/25. It rejects mail from contoso.com if it originates from any other IP address.</maml:para>
        <maml:para>New-InboundConnector -Name "Contoso Inbound Connector" -SenderDomains *.contoso.com -SenderIPAddresses 192.168.0.1/25 -RestrictDomainstoIPAddresses $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the Inbound connector named Contoso Inbound Secure Connector and requires TLS transmission for all messages.</maml:para>
        <maml:para />
        <maml:para>New-InboundConnector -Name "Contoso Inbound Secure Connector" -SenderDomains *.contoso.com -SenderIPAddresses 192.168.0.1/25 -RestrictDomainstoIPAddresses $true -RequireTLS $true -TlsSenderCertificateName *.contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Inbound connectors accept email messages from remote domains that require specific configuration options.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbound and Outbound connectors" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/c8d0cba8-a8cb-41dc-b3fe-11d5882e425b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>ca3da195-5f4f-45b4-9941-ee6aec79ea3d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Resume-Queue</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Resume-Queue cmdlet to restart processing for a suspended queue on a Mailbox server or an Edge Transport server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Resume</command:verb>
    <command:noun>Queue</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Resume-Queue</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">QueueIdentity</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Resume-Queue</maml:name>
      <command:parameter required="True">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter specifies one or more queues by using OPath filter syntax. The OPath filter includes a queue property name followed by a comparison operator and value, for example, {NextHopDomain -eq "contoso.com"}. For details about filterable queue properties and comparison operators, see Queue filters and Use the Exchange Management Shell to manage queues.</maml:para>
        <maml:para>You can specify multiple criteria by using the and comparison operator. Property values that aren't expressed as an integer must be enclosed in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the queue. Valid input for this parameter uses the syntax Server\Queue or Queue, for example, Mailbox01\contoso.com or Unreachable. For details about queue identity, see the "Queue identity" section in Use the Exchange Management Shell to manage queues.</maml:para>
      </maml:description>
      <command:parameterValue required="True">QueueIdentity</command:parameterValue>
      <dev:type>
        <maml:name>QueueIdentity</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
        <maml:para>You can use the Server parameter and the Filter parameter in the same command. You can't use the Server parameter and the Identity parameter in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example resumes processing of all queues where the NextHopDomain is Fourthcoffee.com on the server Server1.contoso.com.</maml:para>
        <maml:para />
        <maml:para>Resume-Queue -Server Server1.contoso.com -Filter {NextHopDomain -eq "Fourthcoffee.com"}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>If you use the Identity parameter, the queue is resumed only if that identity matches a single queue. If the identity matches more than one queue, you receive an error. To resume more than one queue in a single operation, you must use the Filter parameter.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/ca3da195-5f4f-45b4-9941-ee6aec79ea3d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>ca73d195-542f-4acf-b2ff-84275e26a79a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-OutboundConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the New-OutboundConnector cmdlet to create a new Outbound connector in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>OutboundConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-OutboundConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AllAcceptedDomains</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BypassValidation</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CloudServicesMailEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectorSource</maml:name>
        <command:parameterValue required="True">Default | Migrated | HybridWizard</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectorType</maml:name>
        <command:parameterValue required="True">OnPremises | Partner</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsTransportRuleScoped</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientDomains</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RouteAllMessagesViaOnPremises</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmartHosts</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsDomain</maml:name>
        <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsSettings</maml:name>
        <command:parameterValue required="True">EncryptionOnly | CertificateValidation | DomainValidation</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UseMXRecord</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a descriptive name for the connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AllAcceptedDomains</maml:name>
      <maml:description>
        <maml:para>When this parameter is set to $true, the connector applies to all accepted domains.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BypassValidation</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CloudServicesMailEnabled</maml:name>
      <maml:description>
        <maml:para>Set to $true to enable this connector to deliver messages to the cloud service.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comment</maml:name>
      <maml:description>
        <maml:para>The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectorSource</maml:name>
      <maml:description>
        <maml:para>The ConnectorSource parameter specifies how the connector is created. Valid input for this parameter includes the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Default: The connector is manually created.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HybridWizard: The connector is automatically created by the Hybrid Configuration Wizard.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Migrated: The connector was originally created in Microsoft Forefront Online Protection for Exchange.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value for connectors you create is Default. It isn't recommended that you change this value.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Default | Migrated | HybridWizard</command:parameterValue>
      <dev:type>
        <maml:name>Default | Migrated | HybridWizard</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectorType</maml:name>
      <maml:description>
        <maml:para>The ConnectorType parameter specifies a category for the domains that are serviced by the connector. Valid input for this parameter includes the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Partner: The connector services domains that are external to your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OnPremises: The connector services domains that are used by your on-premises organization.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">OnPremises | Partner</command:parameterValue>
      <dev:type>
        <maml:name>OnPremises | Partner</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter enables or disables the connector. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsTransportRuleScoped</maml:name>
      <maml:description>
        <maml:para>The IsTransportRuleScoped parameter associates the Outbound connector with a transport rule. Valid input for this parameter is $true or $false.</maml:para>
        <maml:para>A transport rule is scoped to a specific Outbound connector using the RouteMessageOutboundConnector parameter on the New-TransportRule or Set-TransportRule cmdlets. Messages that match the conditions of the transport rule are routed to their destinations using the specified Outbound connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientDomains</maml:name>
      <maml:description>
        <maml:para>The RecipientDomains parameter specifies the domain names to which the Outbound connector routes mail. You can use a wildcard character to specify all subdomains of a specified domain, as shown in the following example: *.contoso.com. However, you can't embed a wildcard character, as shown in the following example: domain.*.contoso.com.You can specify multiple domains separated by commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RouteAllMessagesViaOnPremises</maml:name>
      <maml:description>
        <maml:para>The RouteAllMessagesViaOnPremises parameter indicates all messages serviced by this connector are first routed through the on-premises messaging system. Valid input for this parameter is $true or $false. The default value is $false. If you set RouteAllMessagesViaOnPremises to $true, you must set the value of the ConnectorType parameter to OnPremises in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmartHosts</maml:name>
      <maml:description>
        <maml:para>The SmartHosts parameter specifies the smart hosts the Outbound connector uses to route mail. This parameter is required if you set the UseMxRecord parameter to $false and must be specified on the same command line. The SmartHosts parameter takes one or more FQDNs, such as server.contoso.com, or one or more IP addresses, or a combination of both FQDNs and IP addresses. Separate each value by using a comma. If you enter an IP address, you may enter the IP address as a literal, for example: 10.10.1.1, or using Classless InterDomain Routing (CIDR), for example, 192.168.0.1/25. The smart host identity can be the FQDN of a smart host server, a mail exchange (MX) record, or an address (A) record.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsDomain</maml:name>
      <maml:description>
        <maml:para>The TlsDomain parameter specifies the domain name that the Outbound connector uses to verify the FQDN of the target certificate when establishing a TLS secured connection. This parameter is only used if the TlsSettings parameter is set to DomainValidation. Valid input for the TlsDomain parameter is an SMTP domain. You can use a wildcard character to specify all subdomains of a specified domain, as shown in the following example: *.contoso.com. However, you can't embed a wildcard character, as shown in the following example: domain.*.contoso.com</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      <dev:type>
        <maml:name>SmtpDomainWithSubdomains</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsSettings</maml:name>
      <maml:description>
        <maml:para>The TlsSettings parameter specifies the TLS authentication level that's used for outbound TLS connections established by this Outbound connector. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>EncryptionOnly TLS is used only to encrypt the communication channel. No certificate authentication is performed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CertificateValidation TLS is used to encrypt the channel and certificate chain validation and revocation lists checks are performed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DomainValidation In addition to channel encryption and certificate validation, the Outbound connector also verifies that the FQDN of the target certificate matches the domain specified in the TlsDomain parameter.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">EncryptionOnly | CertificateValidation | DomainValidation</command:parameterValue>
      <dev:type>
        <maml:name>EncryptionOnly | CertificateValidation | DomainValidation</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UseMXRecord</maml:name>
      <maml:description>
        <maml:para>The UseMXRecord parameter enables or disables DNS routing for the connector. Valid input for this parameter is $true or $false. The default value is $true. To bypass DNS routing and use a smart host as the destination for the connector, set the value of UseMXRecord to $false and specify the FQDN or IP address of the smart host using the SmartHosts parameter in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the Outbound connector named Contoso Outbound Connector with the following properties:</maml:para>
        <maml:para />
        <maml:para>It sends messages to recipients in the contoso.com domain and all subdomains.</maml:para>
        <maml:para>It uses TLS encryption and certificate verification for mail routed to the contoso.com domain and all subdomains</maml:para>
        <maml:para>New-OutboundConnector -Name "Contoso Outbound Connector" -RecipientDomains *.contoso.com -TlsSettings DomainValidation -TlsDomain *.contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Outbound connectors send email messages to remote domains that require specific configuration options.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbound and Outbound connectors" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/ca73d195-542f-4acf-b2ff-84275e26a79a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>cbe44cb2-bde2-49d5-823c-9aa52360393e
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-ResubmitRequest</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-ResubmitRequest cmdlet to enable or disable requests to replay redundant copies of messages from Safety Net after a mailbox database recovery.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>ResubmitRequest</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-ResubmitRequest</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ResubmitRequestIdentityParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter enables or disables an active resubmit request. Valid input for this parameter is $true or $false. Setting the value to $false disables the resubmit request.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the resubmit request you want to modify. Each resubmit request is identified by an incremented integer value.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ResubmitRequestIdentityParameter</command:parameterValue>
      <dev:type>
        <maml:name>ResubmitRequestIdentityParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example disables the resubmit request with the identity 8.</maml:para>
        <maml:para />
        <maml:para>Set-ResubmitRequest 8 -Enabled $false</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/cbe44cb2-bde2-49d5-823c-9aa52360393e(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>ccb5731b-3fca-4d69-a91f-5049ea963fac
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-HostedConnectionFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-HostedConnectionFilterPolicy cmdlet to modify the settings of connection filter policies in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>HostedConnectionFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-HostedConnectionFilterPolicy</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">HostedConnectionFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdminDisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DirectoryBasedEdgeBlockMode</maml:name>
        <command:parameterValue required="True">Default | Off | On</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableSafeList</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IPAllowList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IPBlockList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MakeDefault</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the connection filter policy you want to modify. You can use any value that uniquely identifies the policy. For example, you can use the name, GUID or distinguished name (DN) of the hosted connection filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HostedConnectionFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>HostedConnectionFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdminDisplayName</maml:name>
      <maml:description>
        <maml:para>The AdminDisplayName parameter specifies a description for the connection filter policy. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DirectoryBasedEdgeBlockMode</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Default | Off | On</command:parameterValue>
      <dev:type>
        <maml:name>Default | Off | On</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableSafeList</maml:name>
      <maml:description>
        <maml:para>The EnableSafeList parameter enables or disables use of the safe list. The safe list is a dynamic allow list in the Microsoft datacenter that requires no customer configuration. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IPAllowList</maml:name>
      <maml:description>
        <maml:para>The IPAllowList parameter specifies IP addresses from which messages are always allowed. Messages from the IP addresses you specify won't be identified as spam, despite any other spam characteristics of the messages.</maml:para>
        <maml:para>You enter the IP addresses using the following syntax:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Single IP For example, 192.168.1.1.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>IP range You can use an IP address range, for example, 192.168.0.1-192.168.0.254.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CIDR IP You can use Classless InterDomain Routing (CIDR), for example, 192.168.0.1/25.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can specify multiple IP addresses of the same type separated by commas. For example, &lt;single IP1&gt;, &lt;single IP2&gt; or &lt;CIDR IP1&gt;, &lt;CIDR IP2&gt;. To specify multiple IP addresses of different types at the same time, you need to use the following multivalued property syntax: @{Add="&lt;single IP1&gt;","&lt;IP range1&gt;",&lt;CIDR IP1&gt;...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IPBlockList</maml:name>
      <maml:description>
        <maml:para>The IPBlockList parameter specifies IP addresses from which messages are never allowed. Messages from the IP addresses you specify are blocked without any further spam scanning.</maml:para>
        <maml:para>You enter the IP addresses using the following syntax:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Single IP For example, 192.168.1.1.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>IP range You can use an IP address range, for example, 192.168.0.1-192.168.0.254.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CIDR IP You can use Classless InterDomain Routing (CIDR), for example, 192.168.0.1/25.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can specify multiple IP addresses of the same type separated by commas. For example, &lt;single IP1&gt;, &lt;single IP2&gt; or &lt;CIDR IP1&gt;, &lt;CIDR IP2&gt;. To specify multiple IP addresses of different types at the same time, you need to use the following multivalued property syntax: @{Add="&lt;single IP1&gt;","&lt;IP range1&gt;",&lt;CIDR IP1&gt;...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MakeDefault</maml:name>
      <maml:description>
        <maml:para>The MakeDefault switch makes the specified policy the default connection filter policy. You don't have to specify a value with this switch.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the connection filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the connection filter policy named Contoso Connection Filter Policy with the following settings:</maml:para>
        <maml:para />
        <maml:para>Messages from 192.168.1.10 and 192.168.1.23 are never identified as spam.</maml:para>
        <maml:para>Messages from 10.10.10.10/24 and 172.17.17.0/16 are always identified as spam.</maml:para>
        <maml:para>Set-HostedConnectionFilterPolicy "Contoso Connection Filter Policy" -IPAllowList 192.168.1.10,192.168.1.23 -IPBlockList 10.10.10.10/24,172.17.17.0/16</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the connection filter policy named Contoso Connection Filter Policy with the following settings:</maml:para>
        <maml:para />
        <maml:para>The following IP addresses are added to the existing values in the IP allow list: 192.168.2.10, 192.169.3.0/18, and 192.168.4.1-192.168.4.5.</maml:para>
        <maml:para>The IP address 192.168.1.10 is removed from the existing values in the IP allow list.</maml:para>
        <maml:para>Set-HostedConnectionFilterPolicy "Contoso Connection Filter Policy" -IPAllowList @{Add="192.168.2.10","192.169.3.0/18","192.168.4.1-192.168.4.5";Remove="192.168.1.10"}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/ccb5731b-3fca-4d69-a91f-5049ea963fac(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>cfb850c5-efb2-4fb5-a5c3-3fb6aba11008
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-DlpPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-DlpPolicy cmdlet to view information about existing data loss prevention (DLP) policies.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>DlpPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-DlpPolicy</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the DLP policy you want to remove. You can use any value that uniquely identifies the DLP policy. For example, you can specify the name, GUID, or distinguished name (DN) of the DLP policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DlpPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a summary list of all DLP policies.</maml:para>
        <maml:para />
        <maml:para>Get-DlpPolicy</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns detailed information about the DLP policy named Employee Numbers. The command is piped to the Format-List cmdlet to display the detailed configuration of the specified DLP policy.</maml:para>
        <maml:para />
        <maml:para>Get-DlpPolicy "Employee Numbers" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/cfb850c5-efb2-4fb5-a5c3-3fb6aba11008(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>cfc57936-1cc6-44dc-90c8-d77f37ea2661
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-MalwareFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Remove-MalwareFilterPolicy cmdlet to remove malware filter policies from your organization.</maml:para>
      <maml:para>When a policy is removed and there are rules associated with it, the rules are not removed when the policy is removed. This is by design. If you want to remove the associated rules, you need to do this separately via the Remove-MalwareFilterRule cmdlet.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>MalwareFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-MalwareFilterPolicy</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MalwareFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the malware filter policy you want to remove. You can use any value that uniquely identifies the policy. For example, you can use the name, GUID, or distinguished name (DN) of the malware filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MalwareFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MalwareFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress warning or confirmation messages. This switch can be used when the task is run programmatically and prompting for administrative input is inappropriate. If the Force switch isn't provided in the command, you're prompted for administrative input. You don't have to specify a value with this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the malware filter policy named Contoso Malware Filter Policy</maml:para>
        <maml:para />
        <maml:para>Remove-MalwareFilterPolicy "Contoso Malware Filter Policy"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/cfc57936-1cc6-44dc-90c8-d77f37ea2661(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>d510471a-dda5-4df7-b3f8-2ee7a1948436
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-HostedContentFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-HostedContentFilterPolicy cmdlet to view the settings of content filter policies in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>HostedContentFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-HostedContentFilterPolicy</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">HostedContentFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the content filter policy that you want to view. You can use any value that uniquely identifies the policy. For example, you can use the name, GUID or distinguished name (DN) of the content filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HostedContentFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>HostedContentFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows a summary list of all the content filter policies in your cloud-based organization.</maml:para>
        <maml:para />
        <maml:para>Get-HostedContentFilterPolicy</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves details about the content filter policy named Default.</maml:para>
        <maml:para />
        <maml:para>Get-HostedContentFilterPolicy Default | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/d510471a-dda5-4df7-b3f8-2ee7a1948436(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>d6020f77-c852-46f6-b7c5-5ca6feae0fdf
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-Message</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-Message cmdlet to view the details of one or more messages in queues on Mailbox servers or Edge Transport servers.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>Message</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-Message</maml:name>
      <command:parameter required="False">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BookmarkIndex</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BookmarkObject</maml:name>
        <command:parameterValue required="True">ExtensibleMessageInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeBookmark</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeComponentLatencyInfo</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeRecipientInfo</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReturnPageInfo</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SearchForward</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SortOrder</maml:name>
        <command:parameterValue required="True">QueueViewerSortOrderEntry[]</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-Message</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MessageIdentity</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BookmarkIndex</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BookmarkObject</maml:name>
        <command:parameterValue required="True">ExtensibleMessageInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeBookmark</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeComponentLatencyInfo</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeRecipientInfo</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReturnPageInfo</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SearchForward</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SortOrder</maml:name>
        <command:parameterValue required="True">QueueViewerSortOrderEntry[]</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-Message</maml:name>
      <command:parameter required="False">
        <maml:name>Queue</maml:name>
        <command:parameterValue required="True">QueueIdentity</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BookmarkIndex</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BookmarkObject</maml:name>
        <command:parameterValue required="True">ExtensibleMessageInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeBookmark</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeComponentLatencyInfo</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeRecipientInfo</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReturnPageInfo</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SearchForward</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SortOrder</maml:name>
        <command:parameterValue required="True">QueueViewerSortOrderEntry[]</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BookmarkIndex</maml:name>
      <maml:description>
        <maml:para>The BookmarkIndex parameter specifies the position in the result set where the displayed results start. The value of this parameter is a 1-based index in the total result set. The BookmarkIndex parameter can't be used with the BookmarkObject parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BookmarkObject</maml:name>
      <maml:description>
        <maml:para>The BookmarkObject parameter specifies the object in the result set where the displayed results start. The BookmarkObject parameter can't be used with the BookmarkIndex parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExtensibleMessageInfo</command:parameterValue>
      <dev:type>
        <maml:name>ExtensibleMessageInfo</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter specifies one or more messages by using OPath filter syntax. The OPath filter includes a message property name followed by a comparison operator and value, for example, {FromAddress -like "*@contoso.com"}. For details about filterable message properties and comparison operators, see Message filters and Use the Exchange Management Shell to manage queues.</maml:para>
        <maml:para>You can specify multiple criteria by using the and comparison operator. Property values that aren't expressed as an integer must be enclosed in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the message. Valid input for this parameter uses the syntax Server\Queue\MessageInteger or Queue\MessageInteger or MessageInteger, for example, Mailbox01\contoso.com\5 or 10. For details about message identity, see the "Message identity" section in Use the Exchange Management Shell to manage queues.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageIdentity</command:parameterValue>
      <dev:type>
        <maml:name>MessageIdentity</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeBookmark</maml:name>
      <maml:description>
        <maml:para>The IncludeBookmark parameter specifies whether to include the bookmark object when the query results are displayed. The IncludeBookmark parameter is valid when it's used with the BookmarkObject or BookmarkIndex parameters. If you don't specify a value for the IncludeBookmark parameter, the default value of $true is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeComponentLatencyInfo</maml:name>
      <maml:description>
        <maml:para>The IncludeComponentLatencyInfo switch specifies whether the information about component latency is included in the message properties. If you include this switch, the message objects returned will include latency measurements for each Transport component that has contributed to the local server latency for each queued message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeRecipientInfo</maml:name>
      <maml:description>
        <maml:para>The IncludeRecipientInfo switch specifies whether to display the message recipients in the Recipients field. If you don't include the IncludeRecipientInfo switch, the Recipients field is blank.</maml:para>
        <maml:para>Storing the results of a Get-Message -IncludeRecipientInfo command in a variable allows you to display additional properties for the message recipients. The following list describes the available recipient properties:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Address: The email address of the recipient.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Type: The recipient type, which may be External, Mailbox, or Distribution Group. Distribution Group is used when the destination is an expansion server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FinalDestination: The distinguished name (DN) of the object used to route the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Status: The recipient status may be Complete, Ready, or Retry.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastError: The SMTP response after the last delivery attempt or a localized error message if the message is placed in the unreachable queue.</maml:para>
        </command:listItem></command:list>
        <maml:para>For example, to store the recipient information of a message in the contoso.com remote delivery queue that has the MessageIdentity value of 1234 to a variable named $x, use the following command.</maml:para>
        <maml:para />
        <maml:para>$x=Get-Message -Identity "contoso.com\1234" -IncludeRecipientInfo</maml:para>
        <maml:para />
        <maml:para>To display the extended recipient properties that are now stored in the $x variable, use the following command.</maml:para>
        <maml:para />
        <maml:para>$x.Recipients</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Queue</maml:name>
      <maml:description>
        <maml:para>The Queue parameter specifies the identity of the queue that contains the messages that you want to display. Valid input for this parameter uses the syntax &lt;Server&gt;\&lt;Queue&gt; or &lt;Queue&gt;, for example, Mailbox01\contoso.com or Unreachable. For details about queue identity, see the "Queue identity" section in Use the Exchange Management Shell to manage queues.</maml:para>
        <maml:para>If you use the Queue parameter, you can't use the Identity, Filter or Server parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">QueueIdentity</command:parameterValue>
      <dev:type>
        <maml:name>QueueIdentity</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the maximum number of results to return. If you want to return all requests that match the query, use unlimited for the value of this parameter. The default value is 1000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReturnPageInfo</maml:name>
      <maml:description>
        <maml:para>The ReturnPageInfo parameter is a hidden parameter. Use it to return information about the total number of results and the index of the first object of the current page. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SearchForward</maml:name>
      <maml:description>
        <maml:para>The SearchForward parameter specifies whether to search forward or backward in the result set. The default value is $true. This value causes the result page to be calculated forward from either the start of the result set or forward from a bookmark if specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
        <maml:para>You can use the Server parameter and the Filter parameter in the same command. You can't use the Server parameter and the Identity parameter in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SortOrder</maml:name>
      <maml:description>
        <maml:para>The SortOrder parameter specifies an array of message properties used to control the sort order of the result set. Separate each property by using a comma. Prepend a plus sign (+) symbol to the beginning of the property name to display the results in ascending order. Prepend a minus sign (-) symbol to the beginning of the property name to display the results in descending order.</maml:para>
        <maml:para>If you don't specify a sort order, the result set is displayed in ascending order by MessageIdentity integer.</maml:para>
      </maml:description>
      <command:parameterValue required="True">QueueViewerSortOrderEntry[]</command:parameterValue>
      <dev:type>
        <maml:name>QueueViewerSortOrderEntry[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed information about all messages queued on the local server and received from any sender at the contoso.com domain.</maml:para>
        <maml:para />
        <maml:para>Get-Message -Filter {FromAddress -like "*@contoso.com"} | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all messages queued on the local server, received from any sender at the contoso.com domain, and that have an SCL value greater than 3.</maml:para>
        <maml:para />
        <maml:para>Get-Message -Filter {FromAddress -like "*@contoso.com" -and SCL -gt 3}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays all messages queued on the server named Server01. The results are sorted first in ascending order by sender address and then in descending order of size.</maml:para>
        <maml:para />
        <maml:para>Get-Message -Server Server01.contoso.com -SortOrder: +FromAddress,-Size</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can display messages by including the server name as part of the Identity parameter or the Queue parameter or by including the Server parameter with a filter query. The Identity parameter, Queue parameter, and Filter parameter settings are mutually exclusive.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/d6020f77-c852-46f6-b7c5-5ca6feae0fdf(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>d7dc6f9b-a44b-480e-a795-1d621c08c0e5
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-MalwareFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Remove-MalwareFilterRule cmdlet to remove malware filter rules from your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>MalwareFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-MalwareFilterRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the malware filter rule that you want to remove. You can use any value that uniquely identifies the rule. For example, you can use the name, GUID or distinguished name (DN) of the malware filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the malware filter rule named Contoso Recipients.</maml:para>
        <maml:para />
        <maml:para>Remove-MalwareFilterRule "Contoso Recipients"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/d7dc6f9b-a44b-480e-a795-1d621c08c0e5(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>df73c45e-3797-4da5-95e3-8478f48d06c1
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-Queue</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-Queue cmdlet to view configuration information for queues on Mailbox servers or Edge Transport servers.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>Queue</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-Queue</maml:name>
      <command:parameter required="False">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BookmarkIndex</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BookmarkObject</maml:name>
        <command:parameterValue required="True">ExtensibleQueueInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Exclude</maml:name>
        <command:parameterValue required="True">QueueViewerIncludesAndExcludes</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Include</maml:name>
        <command:parameterValue required="True">QueueViewerIncludesAndExcludes</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeBookmark</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReturnPageInfo</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SearchForward</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SortOrder</maml:name>
        <command:parameterValue required="True">QueueViewerSortOrderEntry[]</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-Queue</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">QueueIdentity</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BookmarkIndex</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BookmarkObject</maml:name>
        <command:parameterValue required="True">ExtensibleQueueInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Exclude</maml:name>
        <command:parameterValue required="True">QueueViewerIncludesAndExcludes</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Include</maml:name>
        <command:parameterValue required="True">QueueViewerIncludesAndExcludes</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeBookmark</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReturnPageInfo</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SearchForward</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SortOrder</maml:name>
        <command:parameterValue required="True">QueueViewerSortOrderEntry[]</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BookmarkIndex</maml:name>
      <maml:description>
        <maml:para>The BookmarkIndex parameter specifies the position in the result set where the displayed results start. The value of this parameter is a 1-based index in the total result set. The BookmarkIndex parameter can't be used with the BookmarkObject parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BookmarkObject</maml:name>
      <maml:description>
        <maml:para>The BookmarkObject parameter specifies the object in the result set where the displayed results start. The BookmarkObject parameter can't be used with the BookmarkIndex parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExtensibleQueueInfo</command:parameterValue>
      <dev:type>
        <maml:name>ExtensibleQueueInfo</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Exclude</maml:name>
      <maml:description>
        <maml:para>The Exclude parameter specifies the types of queues you want to exclude from the results. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>External</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>A valid queue DeliveryType value. For details, see the NextHopSolutionKey section in Queues.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">QueueViewerIncludesAndExcludes</command:parameterValue>
      <dev:type>
        <maml:name>QueueViewerIncludesAndExcludes</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter specifies one or more queues by using OPath filter syntax. The OPath filter includes a queue property name followed by a comparison operator and value, for example, {NextHopDomain -eq "contoso.com"}. For details about filterable queue properties and comparison operators, see Queue filters and Use the Exchange Management Shell to manage queues.</maml:para>
        <maml:para>You can specify multiple criteria by using the and comparison operator. Property values that aren't expressed as an integer must be enclosed in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the queue. Valid input for this parameter uses the syntax Server\Queue or Queue, for example, Mailbox01\contoso.com or Unreachable. For details about queue identity, see the "Queue identity" section in Use the Exchange Management Shell to manage queues.</maml:para>
      </maml:description>
      <command:parameterValue required="True">QueueIdentity</command:parameterValue>
      <dev:type>
        <maml:name>QueueIdentity</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Include</maml:name>
      <maml:description>
        <maml:para>The Include parameter specifies the types of queues you want to include the results. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>External</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>A valid queue DeliveryType value. For details, see the NextHopSolutionKey section in Queues.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">QueueViewerIncludesAndExcludes</command:parameterValue>
      <dev:type>
        <maml:name>QueueViewerIncludesAndExcludes</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeBookmark</maml:name>
      <maml:description>
        <maml:para>The IncludeBookmark parameter specifies whether to include the bookmark object when the query results are displayed. The IncludeBookmark parameter is valid when it's used with the BookmarkObject or BookmarkIndex parameters. If you don't specify a value for the IncludeBookmark parameter, the default value of $true is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the maximum number of results to return. If you want to return all requests that match the query, use unlimited for the value of this parameter. The default value is 1000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReturnPageInfo</maml:name>
      <maml:description>
        <maml:para>The ReturnPageInfo parameter is a hidden parameter. Use it to return information about the total number of results and the index of the first object of the current page. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SearchForward</maml:name>
      <maml:description>
        <maml:para>The SearchForward parameter specifies whether to search forward or backward in the result set. The default value is $true. This value causes the result page to be calculated forward from either the start of the result set or forward from a bookmark if specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
        <maml:para>You can use the Server parameter and the Filter parameter in the same command. You can't use the Server parameter and the Identity parameter in the same command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SortOrder</maml:name>
      <maml:description>
        <maml:para>The SortOrder parameter specifies an array of message properties used to control the sort order of the result set. Separate each property by using a comma. Prepend a plus sign (+) symbol to the beginning of the property name to display the results in ascending order. Prepend a minus sign (-) symbol to the beginning of the property name to display the results in descending order.</maml:para>
        <maml:para>If you don't specify a sort order, the result set is displayed in ascending order by QueueIdentity.</maml:para>
      </maml:description>
      <command:parameterValue required="True">QueueViewerSortOrderEntry[]</command:parameterValue>
      <dev:type>
        <maml:name>QueueViewerSortOrderEntry[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed information for all queues on the Mailbox server on which the command is run.</maml:para>
        <maml:para />
        <maml:para>Get-Queue | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists the queues that contain more than 100 messages.</maml:para>
        <maml:para />
        <maml:para>Get-Queue -Filter {MessageCount -gt 100}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed information for a specific queue that exists on the Mailbox server named Server1.</maml:para>
        <maml:para />
        <maml:para>Get-Queue Server1\contoso.com | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 4 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists only the external queues.</maml:para>
        <maml:para />
        <maml:para>Get-Queue -Exclude Internal</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Queues" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/df73c45e-3797-4da5-95e3-8478f48d06c1(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>e0f9c8e5-2279-4e4d-8a32-108b8e8e9f00
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Uninstall-TransportAgent</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Uninstall-TransportAgent cmdlet to unregister a transport agent from the Transport service on a Mailbox server, the Front End Transport service on a Client Access server, or from an Edge Transport server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Uninstall</command:verb>
    <command:noun>TransportAgent</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Uninstall-TransportAgent</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">TransportAgentObjectId</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportService</maml:name>
        <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the display name of the transport agent to be uninstalled. The length of the name can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TransportAgentObjectId</command:parameterValue>
      <dev:type>
        <maml:name>TransportAgentObjectId</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportService</maml:name>
      <maml:description>
        <maml:para>The TransportService parameter specifies the transport service that you want to view or modify. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Hub for the Transport service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxSubmission for the Mailbox Transport Submission service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxDelivery for the Mailbox Transport Delivery service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FrontEnd for the Front End Transport service on Client Access servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Edge on Edge Transport servers.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      <dev:type>
        <maml:name>Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example uninstalls a fictitious application named Test App from the Transport service on a Mailbox server.</maml:para>
        <maml:para />
        <maml:para>Uninstall-TransportAgent "Test App" -TransportService Hub</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport agents" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/e0f9c8e5-2279-4e4d-8a32-108b8e8e9f00(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>e1022587-f9b6-4ff5-8970-73465e55a34d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Enable-TransportAgent</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Enable-TransportAgent cmdlet to enable a transport agent.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Enable</command:verb>
    <command:noun>TransportAgent</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Enable-TransportAgent</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">TransportAgentObjectId</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportService</maml:name>
        <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the display name of the transport agent to be enabled. The length of the name can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TransportAgentObjectId</command:parameterValue>
      <dev:type>
        <maml:name>TransportAgentObjectId</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportService</maml:name>
      <maml:description>
        <maml:para>The TransportService parameter specifies the transport service that you want to view or modify. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Hub for the Transport service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxSubmission for the Mailbox Transport Submission service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MailboxDelivery for the Mailbox Transport Delivery service on Mailbox servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FrontEnd for the Front End Transport service on Client Access servers.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Edge on Edge Transport servers.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</command:parameterValue>
      <dev:type>
        <maml:name>Hub | Edge | FrontEnd | MailboxSubmission | MailboxDelivery</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables a fictitious application named Test App in the Transport service on a Mailbox server.</maml:para>
        <maml:para />
        <maml:para>Enable-TransportAgent "Test App" -TransportService Hub</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport agents" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/e1022587-f9b6-4ff5-8970-73465e55a34d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>e5c09ede-71eb-42d1-9767-c572d6839c47
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Enable-InboxRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Enable-InboxRule cmdlet to enable an Inbox rule. Inbox rules are used to process messages in the Inbox based on conditions specified and take actions such as moving a message to a specified folder or deleting a message.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Enable</command:verb>
    <command:noun>InboxRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Enable-InboxRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">InboxRuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AlwaysDeleteOutlookRulesBlob</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the display name or GUID of the Inbox rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InboxRuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>InboxRuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AlwaysDeleteOutlookRulesBlob</maml:name>
      <maml:description>
        <maml:para>The AlwaysDeleteOutlookRulesBlob parameter suppresses a warning that end users or administrators get if they use Outlook Web App or Windows PowerShell to modify Inbox rules.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress the confirmation prompt produced if rules created by Outlook exist on the mailbox. When taking an action using Inbox rules on Exchange 2013, any client-side rules are removed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the identity of the mailbox where the Inbox rule is located. You can use one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Domain\Account</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User principal name (UPN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SmtpAddress</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables the Inbox rule Move To Junk Mail for User 1. Values for parameters such as the Mailbox or InboxRule parameter that contain spaces must be enclosed in quotation marks (").</maml:para>
        <maml:para />
        <maml:para>Enable-InboxRule "Move To Junk Mail" -Mailbox "User 1"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>When you create, modify, remove, enable, or disable an Inbox rule on Microsoft Exchange Server 2013, any client-side rules created by Microsoft Outlook are removed.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbox rules" entry in the Recipients Permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/e5c09ede-71eb-42d1-9767-c572d6839c47(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>eb3546bf-ca37-474e-9c22-962fe95af276
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-TransportRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the New-TransportRule cmdlet to create transport rules in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>TransportRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-TransportRule</maml:name>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActivationDate</maml:name>
        <command:parameterValue required="True">DateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADComparisonAttribute</maml:name>
        <command:parameterValue required="True">DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADComparisonOperator</maml:name>
        <command:parameterValue required="True">Equal | NotEqual</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AddManagerAsRecipientType</maml:name>
        <command:parameterValue required="True">To | Cc | Bcc | Redirect</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AddToRecipients</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfCcHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfCcHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfRecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfRecipientAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfToCcHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfToCcHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfToHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnyOfToHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyClassification</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyHtmlDisclaimerFallbackAction</maml:name>
        <command:parameterValue required="True">Wrap | Ignore | Reject</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyHtmlDisclaimerLocation</maml:name>
        <command:parameterValue required="True">Append | Prepend</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyHtmlDisclaimerText</maml:name>
        <command:parameterValue required="True">DisclaimerText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyOME</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyRightsProtectionTemplate</maml:name>
        <command:parameterValue required="True">RmsTemplateIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentExtensionMatchesWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentHasExecutableContent</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentIsPasswordProtected</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentIsUnsupported</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentNameMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentProcessingLimitExceeded</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentPropertyContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AttachmentSizeOver</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BetweenMemberOf1</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BetweenMemberOf2</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BlindCopyTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comments</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ContentCharacterSetContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CopyTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeleteMessage</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Disconnect</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DlpPolicy</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfADComparisonAttribute</maml:name>
        <command:parameterValue required="True">DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfADComparisonOperator</maml:name>
        <command:parameterValue required="True">Equal | NotEqual</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfCcHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfCcHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfRecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfRecipientAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfToCcHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfToCcHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfToHeader</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAnyOfToHeaderMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentExtensionMatchesWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentHasExecutableContent</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentIsPasswordProtected</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentIsUnsupported</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentNameMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentProcessingLimitExceeded</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentPropertyContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfAttachmentSizeOver</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfBetweenMemberOf1</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfBetweenMemberOf2</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfContentCharacterSetContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFrom</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfFromScope</maml:name>
        <command:parameterValue required="True">InOrganization | NotInOrganization</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHasClassification</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHasNoClassification</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHasSenderOverride</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHeaderContainsMessageHeader</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHeaderContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHeaderMatchesMessageHeader</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfHeaderMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfManagerAddresses</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfManagerForEvaluatedUser</maml:name>
        <command:parameterValue required="True">Sender | Recipient</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMessageContainsDataClassifications</maml:name>
        <command:parameterValue required="True">Hashtable[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMessageSizeOver</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfMessageTypeMatches</maml:name>
        <command:parameterValue required="True">OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientADAttributeContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientADAttributeMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientInSenderList</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSCLOver</maml:name>
        <command:parameterValue required="True">SclValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderADAttributeContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderADAttributeMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderInRecipientList</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderIpRanges</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSenderManagementRelationship</maml:name>
        <command:parameterValue required="True">Manager | DirectReport</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentToScope</maml:name>
        <command:parameterValue required="True">InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectOrBodyContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSubjectOrBodyMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfWithImportance</maml:name>
        <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExpiryDate</maml:name>
        <command:parameterValue required="True">DateTime</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>From</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromScope</maml:name>
        <command:parameterValue required="True">InOrganization | NotInOrganization</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GenerateIncidentReport</maml:name>
        <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GenerateNotification</maml:name>
        <command:parameterValue required="True">DisclaimerText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HasClassification</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HasNoClassification</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HasSenderOverride</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HeaderContainsMessageHeader</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HeaderContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HeaderMatchesMessageHeader</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HeaderMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncidentReportContent</maml:name>
        <command:parameterValue required="True">IncidentReportContent[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncidentReportOriginalMail</maml:name>
        <command:parameterValue required="True">IncludeOriginalMail | DoNotIncludeOriginalMail</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogEventText</maml:name>
        <command:parameterValue required="True">EventLogText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ManagerAddresses</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ManagerForEvaluatedUser</maml:name>
        <command:parameterValue required="True">Sender | Recipient</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageContainsDataClassifications</maml:name>
        <command:parameterValue required="True">Hashtable[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageSizeOver</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageTypeMatches</maml:name>
        <command:parameterValue required="True">OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mode</maml:name>
        <command:parameterValue required="True">Audit | AuditAndNotify | Enforce</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ModerateMessageByManager</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ModerateMessageByUser</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>NotifySender</maml:name>
        <command:parameterValue required="True">NotifyOnly | RejectMessage | RejectUnlessFalsePositiveOverride | RejectUnlessSilentOverride | RejectUnlessExplicitOverride</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PrependSubject</maml:name>
        <command:parameterValue required="True">SubjectPrefix</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Priority</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Quarantine</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientADAttributeContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientADAttributeMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientAddressContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientAddressMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientInSenderList</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RedirectMessageTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RejectMessageEnhancedStatusCode</maml:name>
        <command:parameterValue required="True">RejectEnhancedStatus</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RejectMessageReasonText</maml:name>
        <command:parameterValue required="True">DsnText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RemoveHeader</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RemoveOME</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RouteMessageOutboundConnector</maml:name>
        <command:parameterValue required="True">OutboundConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RouteMessageOutboundRequireTls</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RuleErrorAction</maml:name>
        <command:parameterValue required="True">Ignore | Defer</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RuleSubType</maml:name>
        <command:parameterValue required="True">None | Dlp</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SCLOver</maml:name>
        <command:parameterValue required="True">SclValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderADAttributeContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderADAttributeMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderAddressLocation</maml:name>
        <command:parameterValue required="True">Header | Envelope | HeaderOrEnvelope</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderInRecipientList</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderIpRanges</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderManagementRelationship</maml:name>
        <command:parameterValue required="True">Manager | DirectReport</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentToScope</maml:name>
        <command:parameterValue required="True">InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SetAuditSeverity</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SetHeaderName</maml:name>
        <command:parameterValue required="True">HeaderName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SetHeaderValue</maml:name>
        <command:parameterValue required="True">HeaderValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SetSCL</maml:name>
        <command:parameterValue required="True">SclValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmtpRejectMessageRejectStatusCode</maml:name>
        <command:parameterValue required="True">RejectStatusCode</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmtpRejectMessageRejectText</maml:name>
        <command:parameterValue required="True">RejectText</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>StopRuleProcessing</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectOrBodyContainsWords</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectOrBodyMatchesPatterns</maml:name>
        <command:parameterValue required="True">Pattern[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UseLegacyRegex</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WithImportance</maml:name>
        <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the display name of the transport rule to be created. The length of the name can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActivationDate</maml:name>
      <maml:description>
        <maml:para>The ActivationDate parameter specifies the date when this rule will become effective. The rule won't take any action on messages until the day you specify for this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DateTime</command:parameterValue>
      <dev:type>
        <maml:name>DateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ADComparisonAttribute</maml:name>
      <maml:description>
        <maml:para>The ADComparisonAttribute parameter specifies an Active Directory attribute to compare between the sender and recipients. When you use this parameter, the specified Active Directory attribute of the sender is compared to the same Active Directory attribute of all the recipients of the message. You can use one of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>When specifying the ADComparisonAttribute parameter, if you don't specify a value for the ADComparisonOperator parameter, the default comparison operator Equal is used.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</command:parameterValue>
      <dev:type>
        <maml:name>DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ADComparisonOperator</maml:name>
      <maml:description>
        <maml:para>The ADComparisonOperator parameter specifies a comparison operator for the ADComparisonAttribute parameter. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Equal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotEqual</maml:para>
        </command:listItem></command:list>
        <maml:para>If you use the ADComparisonOperator parameter, you must also use the ADComparisonAttribute parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Equal | NotEqual</command:parameterValue>
      <dev:type>
        <maml:name>Equal | NotEqual</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddManagerAsRecipientType</maml:name>
      <maml:description>
        <maml:para>The AddManagerAsRecipientType parameter specifies how the message is relayed to the manager of the sender or recipient. You can use any of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>To The manager is added to the recipients in the To line of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Cc The manager is added to the recipients in the carbon copy (Cc) line of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Bcc The manager is added to the recipients in the blind carbon copy (Bcc) line of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Redirect The message is redirected to the manager instead of being delivered to the original recipients.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">To | Cc | Bcc | Redirect</command:parameterValue>
      <dev:type>
        <maml:name>To | Cc | Bcc | Redirect</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddToRecipients</maml:name>
      <maml:description>
        <maml:para>The AddToRecipients parameter specifies one or more additional recipients for the message. Separate multiple recipients with commas. The specified recipients are added as To recipients.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfCcHeader</maml:name>
      <maml:description>
        <maml:para>The AnyOfCcHeader parameter specifies one or more recipients. The rule is applied if any of these recipients are present as a Cc recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfCcHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The AnyOfCcHeaderMemberOf parameter specifies a distribution group. The rule is applied if a member of the specified distribution group is present as a Cc recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfRecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The AnyOfRecipientAddressContainsWords parameter specifies one or more words to check in a recipient address. The rule is applied if a recipient's address includes any of these words.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfRecipientAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The AnyOfRecipientAddressMatchesPatterns parameter specifies one or more regular expressions to match in a recipient address. The rule is applied if any of the recipients' addresses matches the pattern you specify.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfToCcHeader</maml:name>
      <maml:description>
        <maml:para>The AnyOfToCcHeader parameter specifies one or more recipients. The rule is applied if any of the recipients specified are present as a To or Cc recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfToCcHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The AnyOfToCcHeaderMemberOf parameter specifies a distribution group. The rule is applied if a member of the specified distribution group is present as a To or Cc recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfToHeader</maml:name>
      <maml:description>
        <maml:para>The AnyOfToHeader parameter specifies one or more recipients. The rule is applied if any of the specified recipients are present as a To recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnyOfToHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The AnyOfToHeaderMemberOf parameter specifies a distribution group. The rule is applied if a member of the specified distribution group is present as a To recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyClassification</maml:name>
      <maml:description>
        <maml:para>The ApplyClassification parameter specifies a message classification to apply to the message.</maml:para>
        <maml:para>The message classification referred to in this parameter is the custom message classification that you can create in your organization. It isn't related to the data loss prevention (DLP) classification.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyHtmlDisclaimerFallbackAction</maml:name>
      <maml:description>
        <maml:para>The ApplyHtmlDisclaimerFallbackAction parameter specifies an action to fall back to if the HTML disclaimer can't be applied to a message. Valid fallback actions include the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Wrap The original message is wrapped as an attachment in a new message and the disclaimer is used as the message body for the new message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Ignore The rule is ignored and the message is delivered without the disclaimer.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Reject The message is rejected.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used with the ApplyHtmlDisclaimerText parameter. If you use the ApplyHtmlDisclaimerText parameter without specifying a value for this parameter, the default fallback action, Wrap, is used.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Wrap | Ignore | Reject</command:parameterValue>
      <dev:type>
        <maml:name>Wrap | Ignore | Reject</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyHtmlDisclaimerLocation</maml:name>
      <maml:description>
        <maml:para>The ApplyHtmlDisclaimerLocation parameter specifies the location within the message where the HTML disclaimer text is inserted. You can use either of the following two values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Append The disclaimer is added to the end of the message body.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Prepend The disclaimer is inserted to the beginning of the message body.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used with the ApplyHtmlDisclaimerText parameter. If you use the ApplyHtmlDisclaimerText parameter without specifying a value for this parameter, the default value, Append, is used.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Append | Prepend</command:parameterValue>
      <dev:type>
        <maml:name>Append | Prepend</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyHtmlDisclaimerText</maml:name>
      <maml:description>
        <maml:para>The ApplyHtmlDisclaimerText parameter specifies disclaimer text to be inserted in the message. Disclaimer text can include HTML tags and inline cascading style sheet (CSS) tags. You can add images using the IMG tag.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DisclaimerText</command:parameterValue>
      <dev:type>
        <maml:name>DisclaimerText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyOME</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The ApplyOME parameter specifies that a message and its attachments will be encrypted if the message matches the conditions of this rule.</maml:para>
        <maml:para>Valid input for this parameter is $true or $false. The default is $false.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplyRightsProtectionTemplate</maml:name>
      <maml:description>
        <maml:para>The ApplyRightsProtectionTemplate parameter specifies the name of a rights management service (RMS) template to apply to the message. This action adds rights protection to the messages that meet the conditions of this rule. To use this action, an Active Directory Rights Management Services (AD RMS) server should exist in the topology or the organization should be configured to use the ILS service.</maml:para>
        <maml:para>For more information, see Transport protection rules.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RmsTemplateIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RmsTemplateIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentContainsWords</maml:name>
      <maml:description>
        <maml:para>The AttachmentContainsWords parameter specifies one or more words to check in attachments. Only supported attachment types are checked. The rule is applied if any of the attachments contain any of the words you specify.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentExtensionMatchesWords</maml:name>
      <maml:description>
        <maml:para>The AttachmentExtensionMatchesWords parameter specifies one or more word patterns to check in attachment extensions. The rule is applied if the extensions of any of the attachments match the word patterns you specify.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentHasExecutableContent</maml:name>
      <maml:description>
        <maml:para>The AttachmentHasExecutableContent parameter specifies whether the rule is applied when any attachments in the message contain executable content. If you set this parameter to $true, the rule is applied if any of the attachments contains executable content.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentIsPasswordProtected</maml:name>
      <maml:description>
        <maml:para>The AttachmentIsPasswordProtected parameter specifies whether the attachment is a password protected file whose contents can't be inspected. For example, if a password protected ZIP file is in a message, this condition will be met. The rule is applied if any attachment is password protected.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentIsUnsupported</maml:name>
      <maml:description>
        <maml:para>The AttachmentIsUnsupported parameter specifies whether the rule is applied when any attachments in the message are of an unsupported type. Unsupported attachments are attachments for which an IFilter isn't installed on the servers. If you set this parameter to $true, the rule is applied if any of the attachments is an unsupported type.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The AttachmentMatchesPatterns parameter specifies one or more regular expressions to match in message attachment content. Only supported attachment types are checked for the specified pattern.</maml:para>
        <maml:para>Only the first 150 kilobytes (KB) of the attachment is scanned when trying to match a pattern.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentNameMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The AttachmentNameMatchesPatterns parameter specifies one or more word patterns to check in attachment names. The rule is applied if the name of any attachment matches the patterns you specify.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentProcessingLimitExceeded</maml:name>
      <maml:description>
        <maml:para>The AttachmentProcessingLimitExceeded parameter specifies whether the scanning of attachments in the message didn't complete because the processing exceeded built-in limits. This condition is used to create rules that work together with other attachment processing rules and gives you the ability to handle messages whose content couldn't be fully scanned.</maml:para>
        <maml:para>Valid values are $true and $false.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentPropertyContainsWords</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AttachmentSizeOver</maml:name>
      <maml:description>
        <maml:para>The AttachmentSizeOver parameter specifies an attachment size. The rule is applied if the size of any of the attachments exceeds the specified size.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BetweenMemberOf1</maml:name>
      <maml:description>
        <maml:para>The BetweenMemberOf1 parameter specifies a distribution group and must be used together with the BetweenMemberOf2 parameter. The rule is applied if the message is sent between members of the distribution groups specified in these parameters.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BetweenMemberOf2</maml:name>
      <maml:description>
        <maml:para>The BetweenMemberOf2 parameter specifies a distribution group and must be used together with the BetweenMemberOf1 parameter. The rule is applied if the message is sent between members of the distribution groups specified in these parameters.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BlindCopyTo</maml:name>
      <maml:description>
        <maml:para>The BlindCopyTo parameter specifies one or more recipients to add to the message as Bcc recipients.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comments</maml:name>
      <maml:description>
        <maml:para>The Comments parameter specifies informative comments for the transport rule, such as what the rule is used for or how it has changed over time. The length of the comment can't exceed 1024 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ContentCharacterSetContainsWords</maml:name>
      <maml:description>
        <maml:para>The ContentCharacterSetContainsWords parameter specifies one or more character set names to check for in the message. The rule is applied if the message contains any of the character sets specified.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CopyTo</maml:name>
      <maml:description>
        <maml:para>The CopyTo parameter specifies one or more recipients to add to the message as Cc recipients.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeleteMessage</maml:name>
      <maml:description>
        <maml:para>The DeleteMessage parameter specifies that the rule deletes any message that matches the conditions specified.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Disconnect</maml:name>
      <maml:description>
        <maml:para>The Disconnect parameter specifies whether the rules agent disconnects the SMTP session.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DlpPolicy</maml:name>
      <maml:description>
        <maml:para>The DlpPolicy parameter specifies the data loss prevention (DLP) Policy associated with this rule. Each DLP policy is enforced using a set of Transport rules. To learn more about DLP, see Data loss prevention.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether the transport rule should be enabled when it's created. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfADComparisonAttribute</maml:name>
      <maml:description>
        <maml:para>The ExceptIfADComparisonAttribute parameter specifies an Active Directory attribute to compare between the sender and recipients. When you use this parameter, the specified Active Directory attribute of the sender is compared to the same Active Directory attribute of all the recipients of the message. You can use one of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>When specifying the ExceptIfADComparisonAttribute parameter, if you don't specify a value for the ExceptIfADComparisonOperator parameter, the default comparison operator Equal is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</command:parameterValue>
      <dev:type>
        <maml:name>DisplayName | FirstName | Initials | LastName | Office | PhoneNumber | OtherPhoneNumber | Email | Street | POBox | City | State | ZipCode | Country | UserLogonName | HomePhoneNumber | OtherHomePhoneNumber | PagerNumber | MobileNumber | FaxNumber | OtherFaxNumber | Notes | Title | Department | Company | Manager | CustomAttribute1 | CustomAttribute2 | CustomAttribute3 | CustomAttribute4 | CustomAttribute5 | CustomAttribute6 | CustomAttribute7 | CustomAttribute8 | CustomAttribute9 | CustomAttribute10 | CustomAttribute11 | CustomAttribute12 | CustomAttribute13 | CustomAttribute14 | CustomAttribute15</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfADComparisonOperator</maml:name>
      <maml:description>
        <maml:para>The ExceptIfADComparisonOperator parameter specifies a comparison operator for the ExceptIfADComparisonAttribute parameter. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Equal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotEqual</maml:para>
        </command:listItem></command:list>
        <maml:para>If you use the ExceptIfADComparisonOperator parameter, you must also use the ExceptIfADComparisonAttribute parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Equal | NotEqual</command:parameterValue>
      <dev:type>
        <maml:name>Equal | NotEqual</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfCcHeader</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfCcHeader parameter specifies one or more recipients. The rule isn't applied if any of these recipients are present as a Cc recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfCcHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfCcHeaderMemberOf parameter specifies a distribution group. The rule isn't applied if a member of the specified distribution group is present as a Cc recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfRecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfRecipientAddressContainsWords parameter specifies one or more words to check in a recipient address. The rule isn't applied if a recipient's address includes any of these words.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfRecipientAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfRecipientAddressMatchesPatterns parameter specifies one or more regular expressions to match in a recipient address. The rule isn't applied if any of the recipient addresses matches the pattern you specify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfToCcHeader</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfToCcHeader parameter specifies one or more recipients. The rule isn't applied if any of the recipients specified are present as a To or Cc recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfToCcHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfToCcHeaderMemberOf parameter specifies a distribution group. The rule isn't applied if a member of the specified distribution group is present as a To or Cc recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfToHeader</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfToHeader parameter specifies one or more recipients. The rule isn't applied if any of the specified recipients are present as a To recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAnyOfToHeaderMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAnyOfToHeaderMemberOf parameter specifies a distribution group. The rule isn't applied if a member of the specified distribution group is present as a To recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentContainsWords parameter specifies one or more words to check in attachments. Only supported attachment types are checked. The rule isn't applied if any of the attachments contain any of the words you specify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentExtensionMatchesWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentExtensionMatchesWords parameter specifies one or more word patterns to check in attachment extensions. The rule isn't applied if the extensions of any of the attachments match the word patterns you specify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentHasExecutableContent</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentHasExecutableContent parameter specifies whether the rule is applied when any attachments in the message contain executable content. If you set this parameter to $true, the rule isn't applied if any of the attachments contains executable content.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentIsPasswordProtected</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentIsPasswordProtected parameter specifies whether the attachment is a password protected file whose contents can't be inspected. For example, if a password protected ZIP file is in a message, this exception will be met. The rule isn't applied if any attachment is password protected.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentIsUnsupported</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentIsUnsupported parameter specifies whether the rule is applied when any attachments in the message are of an unsupported type. Unsupported attachments are attachments for which an IFilter isn't installed on your servers. If you set this parameter to $true the rule isn't applied if any of the attachments is an unsupported type.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentMatchesPatterns parameter specifies one or more regular expressions to match in message attachment content. Only supported attachment types are checked for the specified pattern.</maml:para>
        <maml:para>Only the first 150 KB of the attachment is scanned when trying to match a pattern.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentNameMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentNameMatchesPatterns parameter specifies one or more word patterns to check in attachment names. The rule isn't applied if the name of any attachment matches the patterns you specify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentProcessingLimitExceeded</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentProcessingLimitExceeded parameter specifies whether the scanning of attachments in the message didn't complete because the processing exceeded built-in limits. This condition is used to create rules that work together with other attachment processing rules and gives you the ability to handle messages whose content couldn't be fully scanned.</maml:para>
        <maml:para>Valid values are $true and $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentPropertyContainsWords</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfAttachmentSizeOver</maml:name>
      <maml:description>
        <maml:para>The ExceptIfAttachmentSizeOver parameter specifies an attachment size. The rule isn't applied if the size of any of the attachments exceeds the specified size.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfBetweenMemberOf1</maml:name>
      <maml:description>
        <maml:para>The ExceptIfBetweenMemberOf1 parameter specifies a distribution group and must be used together with the ExceptIfBetweenMemberOf2 parameter. The rule isn't applied if the message is sent between members of the distribution groups specified in these parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfBetweenMemberOf2</maml:name>
      <maml:description>
        <maml:para>The ExceptIfBetweenMemberOf2 parameter specifies a distribution group and must be used together with the ExceptIfBetweenMemberOf1 parameter. The rule isn't applied if the message is sent between members of the distribution groups specified in these parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfContentCharacterSetContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfContentCharacterSetContainsWords parameter specifies one or more character set names to check for in the message. The rule isn't applied if the message contains any of the character sets specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFrom</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFrom parameter specifies the sender. The rule isn't applied to messages received from this sender.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFromAddressContainsWords parameters specifies one or more words to check for in the From address. The rule isn't applied if the sender's address includes any of these words.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFromAddressMatchesPatterns parameter specifies one or more regular expressions to match in the sender's address. The rule isn't applied if the sender's address matches the pattern you specify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFromMemberOf parameter specifies a distribution group. The rule isn't applied if the sender of the message is a member of this distribution group.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfFromScope</maml:name>
      <maml:description>
        <maml:para>The ExceptIfFromScope parameter specifies whether the sender is inside or outside your organization. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>InOrganization</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotInOrganization</maml:para>
        </command:listItem></command:list>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">InOrganization | NotInOrganization</command:parameterValue>
      <dev:type>
        <maml:name>InOrganization | NotInOrganization</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHasClassification</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHasClassification parameter specifies a message classification. The rule isn't applied to messages that have the specified classification.</maml:para>
        <maml:para>The message classification referred to in this parameter is the custom message classification that you can create in your organization. It isn't related to the DLP classification.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHasNoClassification</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHasNoClassification parameter specifies that the rule isn't applied to messages that don't have a message classification.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHasSenderOverride</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHasSenderOverride parameter specifies the rule to check if the sender has chosen to override a DLP policy. Set this parameter to $true to prevent this rule from applying to messages where the sender took action to override a DLP policy restriction.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHeaderContainsMessageHeader</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHeaderContainsMessageHeader parameter specifies the SMTP message header to inspect for specific words or patterns. This parameter is used together with the ExceptIfHeaderContainsWords parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHeaderContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHeaderContainsWords parameter specifies one or more words to look for in the message header specified in the ExceptIfHeaderContainsMessageHeader parameter. The rule isn't applied to messages where the header value of the specified header matches any of the words specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHeaderMatchesMessageHeader</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHeaderMatchesMessageHeader parameter specifies an SMTP message header to inspect. This parameter is used together with the ExceptIfHeaderMatchesPatterns parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfHeaderMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfHeaderMatchesPatterns parameter specifies a pattern to match in the header specified in the ExceptIfHeaderMatchesMessageHeader parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfManagerAddresses</maml:name>
      <maml:description>
        <maml:para>The ExceptIfManagerAddresses parameter specifies a recipient. The rule isn't applied to messages where the specified recipient is the manager of the sender or the recipient. Whether it's the manager for the sender or the recipient is defined in the ExceptIfManagerForEvaluatedUser parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfManagerForEvaluatedUser</maml:name>
      <maml:description>
        <maml:para>The ExceptIfManagerForEvaluatedUser parameter specifies whether the sender or the recipient's manager should be evaluated. The specified user's manager attribute is compared with users specified in the ExceptIfManagerAddresses parameter. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Recipient</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Sender</maml:para>
        </command:listItem></command:list>
        <maml:para>Use this parameter together with the ExceptIfManagerAddresses parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Sender | Recipient</command:parameterValue>
      <dev:type>
        <maml:name>Sender | Recipient</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMessageContainsDataClassifications</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMessageContainsDataClassifications parameter specifies the sensitive information types to look for in the message body and any of the attachments. For a list of sensitive information types available, see Sensitive Information Types Inventory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Hashtable[]</command:parameterValue>
      <dev:type>
        <maml:name>Hashtable[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMessageSizeOver</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMessageSizeOver parameter specifies a message size. The rule isn't applied to any messages that exceed the message size you specify for this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfMessageTypeMatches</maml:name>
      <maml:description>
        <maml:para>The ExceptIfMessageTypeMatches parameter specifies a message type. The rule isn't applied to any messages that match the message type you specify. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>OOF Auto-reply messages configured by the user</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AutoForward Messages automatically forwarded to an alternative recipient</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Encrypted Encrypted messages</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Calendaring Meeting requests and responses</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PermissionControlled Messages that have specific permissions configured</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Voicemail Voice mail messages forwarded by Unified Messaging Service</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Signed Digitally signed messages</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ApprovalRequest Moderation request messages sent to moderators</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReadReceipt Read receipts</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</command:parameterValue>
      <dev:type>
        <maml:name>OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientADAttributeContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientADAttributeContainsWords parameter specifies one or more words to check for in specific Active Directory attributes of the recipient. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the words. For example, to look for the word Sales in the Department attribute, set this parameter to Department:Sales. If you want to specify multiple values for multiple attributes, separate them with commas. The rule isn't applied if any of the specified attributes have the value specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientADAttributeMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientADAttributeMatchesPatterns parameter specifies one or more patterns to check for in the specified Active Directory attribute of the recipient. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the pattern. If you want to specify multiple patterns for multiple attributes, separate them with commas. The rule isn't applied if the values of any of the specified attributes match the specified patterns for that attribute.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientAddressContainsWords parameter specifies words to check for in the recipient address.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientAddressMatchesPatterns parameter specifies one or more text patterns to match in the recipient address.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientDomainIs parameter specifies the recipient's domain. The rule isn't applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientInSenderList</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The ExceptIfRecipientInSenderList parameter specifies an exception when a recipient is defined in a supervision list entry on the sender's mailbox. Supervision list entries perform the following functions:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>They specify individual exceptions for the user in the closed campus supervision policy.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>They identify the user as a victim in the anti-bullying policy.</maml:para>
        </command:listItem></command:list>
        <maml:para>To view the supervision list entries that are configured on a user's mailbox, run the Get-SupervisionListEntry command and specify the user's mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSCLOver</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSCLOver parameter specifies a spam confidence level (SCL) value. The rule isn't applied to messages with an SCL equal to or higher than the value specified. Valid SCL values are integers from 0 through 9, and -1. The value -1 specifies that the message is from a trusted source.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SclValue</command:parameterValue>
      <dev:type>
        <maml:name>SclValue</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderADAttributeContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSenderADAttributeContainsWords parameter specifies one or more words to check for in specific Active Directory attributes of the sender. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the words. For example, to look for the word Sales in the Department attribute, set this parameter to Department:Sales. If you want to specify multiple values for multiple attributes, separate them with commas. The rule isn't applied if any of the specified attributes have the value specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderADAttributeMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSenderADAttributeMatchesPatterns parameter specifies one or more patterns to check for in the specified Active Directory attribute of the sender. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the pattern. If you want to specify multiple patterns for multiple attributes, separate them with commas. The rule isn't applied if the values of any of the specified attributes match the specified patterns for that attribute.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderDomainIs</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSenderDomainIs parameter specifies the sender's domain. The rule isn't applied to messages received from senders whose email addresses are in the specified domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderInRecipientList</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The ExceptIfSenderInRecipientList parameter specifies an exception when the sender is defined in a supervision list entry on a recipient's mailbox. Supervision list entries perform the following functions:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>They specify individual exceptions for the user in the closed campus supervision policy.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>They identify the user as a victim in the anti-bullying policy.</maml:para>
        </command:listItem></command:list>
        <maml:para>To view the supervision list entries that are configured on a user's mailbox, run the Get-SupervisionListEntry command and specify the user's mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderIpRanges</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSenderIpRanges parameter specifies the IP ranges to compare with the sender's IP address. The rule isn't applied if the IP address of the sender falls within one of the IP ranges specified in this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSenderManagementRelationship</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSenderManagementRelationship parameter specifies a relationship between the sender and the recipient. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Manager The rule isn't applied if the sender is the manager of the recipient.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DirectReport The rule isn't applied if the sender is a direct report of the recipient.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Manager | DirectReport</command:parameterValue>
      <dev:type>
        <maml:name>Manager | DirectReport</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentTo</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentTo parameter specifies a recipient. The rule isn't applied to messages sent to the specified recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentToMemberOf parameter specifies a distribution group. The rule isn't applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no exception is made.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentToScope</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentToScope parameter specifies whether the message is sent to internal, external, or partner recipients. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>InOrganization The recipients are internal to your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotInOrganization The recipients are outside your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ExternalPartner The recipients are in a partner organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ExternalNonPartner The recipients are external to your organization which isn't a partner organization.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</command:parameterValue>
      <dev:type>
        <maml:name>InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectContainsWords parameter specifies words to look for in the message subject.</maml:para>
        <maml:para>You can specify one or more words or phrases. When specifying more than one word or phrase, each word or phrase should be separated by a comma (,). When specifying a phrase that contains one or more spaces, you must enclose the phrase in quotation marks ("), for example:</maml:para>
        <maml:para>Word1,"Phrase with spaces",word2.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectMatchesPatterns parameter specifies text patterns to check the message subject for.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectOrBodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectOrBodyContainsWords parameter specifies words to look for in the message subject and body. The rule isn't applied if any of the words or phrases specified is found in the message subject or body.</maml:para>
        <maml:para>You can specify one or more words or phrases. When specifying more than one word or phrase, each word or phrase should be separated by a comma (,). When specifying a phrase with one or more spaces, you must enclose the phrase in quotation marks ("), for example:</maml:para>
        <maml:para>Word1,"Phrase with spaces",word2.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSubjectOrBodyMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSubjectOrBodyMatchesPatterns parameter specifies text patterns to look for in the message subject and body. The rule isn't applied if the word specified is found in the message subject or body.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfWithImportance</maml:name>
      <maml:description>
        <maml:para>The ExceptIfWithImportance parameter specifies message importance. The rule isn't applied to messages matching the specified importance. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>High</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Low</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Normal | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExpiryDate</maml:name>
      <maml:description>
        <maml:para>The ExpiryDate parameter specifies the date when this rule will stop processing. The rule won't take any action on messages past the date you specify for this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DateTime</command:parameterValue>
      <dev:type>
        <maml:name>DateTime</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>From</maml:name>
      <maml:description>
        <maml:para>The From parameter specifies the sender. The rule is applied to messages received from this sender.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The FromAddressContainsWords parameter specifies one or more words to check for in the From address. The rule is applied if the sender's address includes any of these words.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The FromAddressMatchesPatterns parameter specifies one or more regular expressions to match in the sender's address. The rule is applied if the sender's address matches the pattern you specify.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromMemberOf</maml:name>
      <maml:description>
        <maml:para>The FromMemberOf parameter specifies a distribution group. The rule is applied if the sender of the message is a member of this distribution group.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromScope</maml:name>
      <maml:description>
        <maml:para>The FromScope parameter specifies whether the sender is inside or outside your organization. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>InOrganization</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotInOrganization</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InOrganization | NotInOrganization</command:parameterValue>
      <dev:type>
        <maml:name>InOrganization | NotInOrganization</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GenerateIncidentReport</maml:name>
      <maml:description>
        <maml:para>The GenerateIncidentReport parameter specifies the recipient to whom incident reports will be sent. An incident report is generated for messages that violate a DLP policy in your organization.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GenerateNotification</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DisclaimerText</command:parameterValue>
      <dev:type>
        <maml:name>DisclaimerText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HasClassification</maml:name>
      <maml:description>
        <maml:para>The HasClassification parameter specifies a message classification. The rule is applied to messages that have the specified classification.</maml:para>
        <maml:para>The message classification referred to in this parameter is the custom message classification that you can create in your organization. It isn't related to the DLP classification.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HasNoClassification</maml:name>
      <maml:description>
        <maml:para>The HasNoClassification parameter specifies whether the rule is applied to messages that don't have a message classification.</maml:para>
        <maml:para>If you set this parameter to $true, the rule is applied to all messages that don't have a message classification.</maml:para>
        <maml:para>If you set this parameter to $false, the rule is applied to all messages that have one or more message classifications.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HasSenderOverride</maml:name>
      <maml:description>
        <maml:para>The HasSenderOverride parameter specifies the rule to check if the sender has chosen to override a DLP policy. Set this parameter to $true to apply this rule to messages where the sender took action to override a DLP policy restriction.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HeaderContainsMessageHeader</maml:name>
      <maml:description>
        <maml:para>The HeaderContainsMessageHeader parameter specifies the SMTP message header to inspect for specific words or patterns. This parameter is used together with the HeaderContainsWords parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HeaderContainsWords</maml:name>
      <maml:description>
        <maml:para>The HeaderContainsWords parameter specifies one or more words to look for in the message header specified in the HeaderContainsMessageHeader parameter. The rule is applied to messages where the header value of the specified header matches any of the words specified.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HeaderMatchesMessageHeader</maml:name>
      <maml:description>
        <maml:para>The HeaderMatchesMessageHeader parameter specifies an SMTP message header to inspect. This parameter is used together with the HeaderMatchesPatterns parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HeaderMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The HeaderMatchesPatterns parameter specifies a pattern to match in the header specified in the HeaderMatchesMessageHeader parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncidentReportContent</maml:name>
      <maml:description>
        <maml:para>The IncidentReportContent parameter specifies the message properties that are included in the incident reports. This parameter is used together with the GenerateIncidentReport parameter.</maml:para>
        <maml:para>The valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Sender Includes the sender of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Recipients Includes the recipients in the To: box of the message. Only the first 10 recipients are displayed in the incident report. If there are more than 10 recipients, the remaining number of recipients will be displayed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Subject Includes the message subject.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CC Includes the recipients in the Cc: box of the message. Only the first 10 recipients are displayed in the incident report. If there are more than 10 recipients, the remaining number of recipients will be displayed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>BCC Includes the recipients in the Bcc: box of the message. Only the first 10 recipients are displayed in the incident report. If there are more than 10 recipients, the remaining number of recipients will be displayed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Severity Includes the audit severity of the rule that was triggered. If the message was processed by more than one rule, the highest severity is displayed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Override Includes the override if the sender has chosen to override a PolicyTip. If the sender has provided a justification, the first 100 characters of the justification is also included.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RuleDetections Includes the list of rules that the message triggered.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FalsePositive Includes the false positive if the sender marked the message as a false positive for a PolicyTip.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DataClassifications Includes the list of sensitive information types detected in the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>IdMatch Includes the sensitive information type detected, the exact matched content from the message, and the 150 characters before and after the matched sensitive information.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AttachOriginalMail Includes the entire original message.</maml:para>
        </command:listItem></command:list>
        <maml:para>The message ID is always included in the incident report.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">IncidentReportContent[]</command:parameterValue>
      <dev:type>
        <maml:name>IncidentReportContent[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncidentReportOriginalMail</maml:name>
      <maml:description>
        <maml:para>The IncidentReportOriginalMail parameter specifies whether to include the original message with the incident report. This parameter is used together with the GenerateIncidentReport parameter. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>IncludeOriginalMail</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DoNotIncludeOriginalMail</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is DoNotIncludeOriginalMail.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
        <maml:para>The functionality of this parameter is now managed by the IncidentReportContent parameter, and this parameter will be deprecated in the future. Adding the value AttachOriginalMail to the IncidentReportContent parameter is equivalent to setting this parameter to IncludeOriginalMail value. Even though this parameter is still functional, we recommend you use the IncidentReportContent parameter instead.</maml:para>
      </maml:description>
      <command:parameterValue required="True">IncludeOriginalMail | DoNotIncludeOriginalMail</command:parameterValue>
      <dev:type>
        <maml:name>IncludeOriginalMail | DoNotIncludeOriginalMail</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogEventText</maml:name>
      <maml:description>
        <maml:para>The LogEventText parameter specifies a message string to add to the event log entry for this rule.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EventLogText</command:parameterValue>
      <dev:type>
        <maml:name>EventLogText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ManagerAddresses</maml:name>
      <maml:description>
        <maml:para>The ManagerAddresses parameter specifies a recipient. The rule is applied to messages where the specified recipient is the manager of the sender or the recipient. Whether it's the manager for the sender or the recipient is defined in the ManagerForEvaluatedUser parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ManagerForEvaluatedUser</maml:name>
      <maml:description>
        <maml:para>The ManagerForEvaluatedUser parameter specifies whether the sender or the recipient's manager should be evaluated. The specified user's manager attribute is compared with users specified in the ManagerAddresses parameter. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Recipient</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Sender</maml:para>
        </command:listItem></command:list>
        <maml:para>Use this parameter together with the ManagerAddresses parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Sender | Recipient</command:parameterValue>
      <dev:type>
        <maml:name>Sender | Recipient</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageContainsDataClassifications</maml:name>
      <maml:description>
        <maml:para>The MessageContainsDataClassifications parameter specifies the sensitive information types to look for in the message body and any of the attachments. For a list of sensitive information types available, see Sensitive Information Types Inventory.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Hashtable[]</command:parameterValue>
      <dev:type>
        <maml:name>Hashtable[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageSizeOver</maml:name>
      <maml:description>
        <maml:para>The MessageSizeOver parameter specifies a message size. The rule is applied to all messages that exceed the message size you specify for this parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageTypeMatches</maml:name>
      <maml:description>
        <maml:para>The MessageTypeMatches parameter specifies a message type. The rule is applied to all messages that match the message type you specify. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>OOF Auto-reply messages configured by the user</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AutoForward Messages automatically forwarded to an alternative recipient</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Encrypted Encrypted messages</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Calendaring Meeting requests and responses</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PermissionControlled Messages that have specific permissions configured</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Voicemail Voice mail messages forwarded by Unified Messaging service</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Signed Digitally signed messages</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ApprovalRequest Moderations request messages sent to moderators</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ReadReceipt Read receipts</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</command:parameterValue>
      <dev:type>
        <maml:name>OOF | AutoForward | Encrypted | Calendaring | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mode</maml:name>
      <maml:description>
        <maml:para>The Mode parameter specifies in which mode this rule will operate. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Audit The rule is turned on, and what would have happened if the rule was enforced is logged in message tracking logs. Exchange doesn't take any action that impacts the delivery of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AuditAndNotify The rule is turned on, and it operates the same way it would in Audit mode, but notifications are also enabled.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Enforce The rule is turned on, and all actions specified in the rule are taken.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value Enforce.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Audit | AuditAndNotify | Enforce</command:parameterValue>
      <dev:type>
        <maml:name>Audit | AuditAndNotify | Enforce</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ModerateMessageByManager</maml:name>
      <maml:description>
        <maml:para>The ModerateMessageByManager parameter specifies whether the message should be forwarded to the sender's manager for approval. To enable moderation by the sender's manager, set the value to $true.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ModerateMessageByUser</maml:name>
      <maml:description>
        <maml:para>The ModerateMessageByUser parameter specifies a recipient to forward the message to for approval.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>NotifySender</maml:name>
      <maml:description>
        <maml:para>The NotifySender parameter specifies how the sender of a message that goes against a DLP policy is notified. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>NotifyOnly Sender is notified, but the message is delivered normally.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RejectMessage Message is rejected, and the sender is notified.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RejectUnlessFalsePositiveOverride Message is rejected unless it's marked as a false positive by the sender.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RejectUnlessSilentOverride Message is rejected unless the sender has chosen to override the policy restriction.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RejectUnlessExplicitOverride This is the same as RejectUnlessSilentOverride, but the sender can also provide a justification for overriding the policy restriction.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify any value other than NotifyOnly, you can provide a specific rejection status code and reason using the RejectMessageEnhancedStatusCode and RejectMessageReasonText parameters.</maml:para>
        <maml:para>This action is used together with the MessageContainsDataClassifications condition. If you use this parameter, you must also specify the sensitive information types you want to check against using the MessageContainsDataClassifications parameter.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">NotifyOnly | RejectMessage | RejectUnlessFalsePositiveOverride | RejectUnlessSilentOverride | RejectUnlessExplicitOverride</command:parameterValue>
      <dev:type>
        <maml:name>NotifyOnly | RejectMessage | RejectUnlessFalsePositiveOverride | RejectUnlessSilentOverride | RejectUnlessExplicitOverride</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PrependSubject</maml:name>
      <maml:description>
        <maml:para>The PrependSubject parameter specifies a word or phrase to add to the beginning of the message subject.</maml:para>
        <maml:para>The rule will add the text as you specify in this parameter without adding spaces or other characters to separate it from the original subject. Consider ending the value you specify in this parameter with a colon (:) and a space, or at least a space, to separate it from the original subject.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SubjectPrefix</command:parameterValue>
      <dev:type>
        <maml:name>SubjectPrefix</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Priority</maml:name>
      <maml:description>
        <maml:para>The Priority parameter specifies the priority for this transport rule. Rules with a lower priority value are processed first. If you modify the priority of the rule, the position of the rule in the rule list changes to match the priority that you specified, and the Transport Rules agent increments all rules with a higher priority value. The value of this parameter must be greater than or equal to 0, and must be one less than the total number of transport rules in your organization. For example, if you configured 8 transport rules, you can set this parameter to any value from 0 through 7.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Quarantine</maml:name>
      <maml:description>
        <maml:para>The Quarantine parameter specifies whether the rules agent delivers the message to the quarantine mailbox specified in the Content Filtering configuration.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientADAttributeContainsWords</maml:name>
      <maml:description>
        <maml:para>The RecipientADAttributeContainsWords parameter specifies one or more words to check for in specific Active Directory attributes of the recipient. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the words. For example, to look for the word Sales in the Department attribute, set this parameter to Department:Sales. If you want to specify multiple values for multiple attributes, separate them with commas. The rule will be applied if any of the specified attributes have the value specified.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientADAttributeMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The RecipientADAttributeMatchesPatterns parameter specifies one or more patterns to check for in the specified Active Directory attribute of the recipient. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the pattern. If you want to specify multiple patterns for multiple attributes, separate them with commas. The rule will be applied if the values of any of the specified attributes match the specified patterns for that attribute.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientAddressContainsWords</maml:name>
      <maml:description>
        <maml:para>The RecipientAddressContainsWords parameter specifies one or more words to check for in the recipient's email address.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientAddressMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The RecipientAddressMatchesPatterns parameter specifies a pattern to check the recipient address for.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The RecipientDomainIs parameter specifies the recipient's domain. The rule is applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientInSenderList</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The RecipientInSenderList parameter specifies the condition when a recipient is defined in a supervision list entry on the sender's mailbox. Supervision list entries perform the following functions:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>They specify individual exceptions for the user in the closed campus supervision policy.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>They identify the user as a victim in the anti-bullying policy.</maml:para>
        </command:listItem></command:list>
        <maml:para>To view the supervision list entries that are configured on a user's mailbox, run the Get-SupervisionListEntry command and specify the user's mailbox.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RedirectMessageTo</maml:name>
      <maml:description>
        <maml:para>The RedirectMessageTo parameter specifies that the rule redirects the message to the specified recipient.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RejectMessageEnhancedStatusCode</maml:name>
      <maml:description>
        <maml:para>The RejectMessageEnhancedStatusCode parameter specifies an enhanced status code to provide when rejecting messages. Valid values are 5.7.1 or between 5.7.10 and 5.7.999.</maml:para>
        <maml:para>The transport rule can add a custom rejection message. To further customize the delivery status notification (DSN), you need to create a custom DSN message using the New-SystemMessage cmdlet.</maml:para>
        <maml:para>If an enhanced status code isn't specified, and only the RejectMessageReasonText parameter is used, the enhanced status code 5.7.1 is used.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RejectEnhancedStatus</command:parameterValue>
      <dev:type>
        <maml:name>RejectEnhancedStatus</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RejectMessageReasonText</maml:name>
      <maml:description>
        <maml:para>The RejectMessageReasonText parameter specifies a reason that explains why the message was rejected.</maml:para>
        <maml:para>The transport rule can add a custom rejection message. To further customize the DSN, you need to create a custom DSN message using the New-SystemMessage cmdlet.</maml:para>
        <maml:para>If a RejectMessageReasonText parameter value isn't specified, and an enhanced status code is specified by using the RejectMessageEnhancedStatusCode parameter, the default reason text "Delivery not authorized, message refused" is used.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DsnText</command:parameterValue>
      <dev:type>
        <maml:name>DsnText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RemoveHeader</maml:name>
      <maml:description>
        <maml:para>The RemoveHeader parameter specifies an SMTP header name to be removed from the message.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RemoveOME</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The RemoveOME parameter specifies that a message and its attachments will be decrypted if the message matches the conditions of this rule.</maml:para>
        <maml:para>Valid input for this parameter is $true or $false. The default is $false.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RouteMessageOutboundConnector</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The RouteMessageOutboundConnector parameter specifies the connector to use for routing this message.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OutboundConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OutboundConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RouteMessageOutboundRequireTls</maml:name>
      <maml:description>
        <maml:para>The RouteMessageOutboundRequireTls parameter specifies that Transport Layer Security (TLS) encryption is required when routing this message outside your organization. Set this parameter to $true to require TLS.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RuleErrorAction</maml:name>
      <maml:description>
        <maml:para>The RuleErrorAction parameter specifies how the message should be handled if the rule processing can't be completed. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Ignore The message is sent without completing the rule processing.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Defer The message is deferred so the rules engine can attempt to process the message again.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is Ignore.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Ignore | Defer</command:parameterValue>
      <dev:type>
        <maml:name>Ignore | Defer</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RuleSubType</maml:name>
      <maml:description>
        <maml:para>The RuleSubType parameter specifies the type of this transport rule. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Dlp Specifies that this rule is associated with a DLP policy.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>None Specifies that this is a regular transport rule.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">None | Dlp</command:parameterValue>
      <dev:type>
        <maml:name>None | Dlp</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SCLOver</maml:name>
      <maml:description>
        <maml:para>The SCLOver parameter specifies an SCL value. The rule is applied to messages with an SCL equal to or higher than the value specified. Valid SCL values are integers from 0 through 9, and -1. The value -1 specifies that the message is from a trusted source.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SclValue</command:parameterValue>
      <dev:type>
        <maml:name>SclValue</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderADAttributeContainsWords</maml:name>
      <maml:description>
        <maml:para>The SenderADAttributeContainsWords parameter specifies one or more words to check for in specific Active Directory attributes of the sender. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the words. For example, to look for the word Sales in the Department attribute, set this parameter to Department:Sales. If you want to specify multiple values for multiple attributes, separate them with commas. The rule will be applied if any of the specified attributes have the value specified.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderADAttributeMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The SenderADAttributeMatchesPatterns parameter specifies one or more patterns to check for in the specified Active Directory attribute of the sender. You can check against any of the following Active Directory attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Initials</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherPhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Street</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POBox</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>City</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>State</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ZipCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Country</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UserLogonName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherHomePhoneNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PagerNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MobileNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OtherFaxNumber</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Notes</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Manager</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 - CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To specify a value for an Active Directory attribute, use the name of the Active Directory attribute followed by a colon and the pattern. If you want to specify multiple patterns for multiple attributes, separate them with commas. The rule will be applied if the values of any of the specified attributes match the specified patterns for that attribute.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderAddressLocation</maml:name>
      <maml:description>
        <maml:para>The SenderAddressLocation parameter specifies the fields to look in when evaluating sender addresses. Prior to Exchange Server 2013 Cumulative Update 1, Transport rules only processed message headers when evaluating senders. With the addition of the SenderAddressLocation parameter, you can configure the rules to also examine the message envelope (the sender information sent with the MAIL FROM command in the SMTP transmission) when evaluating senders.</maml:para>
        <maml:para>Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Header Only message headers are examined when evaluating senders.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Envelope Only the message envelope is examined when evaluating senders.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>HeaderOrEnvelope Both message headers and the message envelope are examined when evaluating senders.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is Header.</maml:para>
        <maml:para>By configuring this parameter you can evaluate the message envelope for the following conditions and exceptions:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>From</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FromAddressContainsWords</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FromAddressMatchesPatterns</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FromMemberOf</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SenderDomainIs</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Header | Envelope | HeaderOrEnvelope</command:parameterValue>
      <dev:type>
        <maml:name>Header | Envelope | HeaderOrEnvelope</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderDomainIs</maml:name>
      <maml:description>
        <maml:para>The SenderDomainIs parameter specifies the sender's domain. The rule is applied to messages received from senders whose email addresses are in the specified domain.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderInRecipientList</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The SenderInRecipientList parameter specifies the condition when the sender is defined in a supervision list entry on a recipient's mailbox. Supervision list entries perform the following functions:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>They specify individual exceptions for the user in the closed campus supervision policy.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>They identify the user as a victim in the anti-bullying policy.</maml:para>
        </command:listItem></command:list>
        <maml:para>To view the supervision list entries that are configured on a user's mailbox, run the Get-SupervisionListEntry command and specify the user's mailbox.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderIpRanges</maml:name>
      <maml:description>
        <maml:para>The SenderIpRanges parameter specifies the IP ranges to compare with the sender's IP address. The rule is applied if the IP address of the sender falls within one of the IP ranges specified in this parameter.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderManagementRelationship</maml:name>
      <maml:description>
        <maml:para>The SenderManagementRelationship parameter specifies a relationship between the sender and the recipient. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Manager The rule is applied if the sender is the manager of the recipient.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DirectReport The rule is applied if the sender is a direct report of the recipient.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Manager | DirectReport</command:parameterValue>
      <dev:type>
        <maml:name>Manager | DirectReport</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentTo</maml:name>
      <maml:description>
        <maml:para>The SentTo parameter specifies a recipient. The rule is applied to messages sent to the specified recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The SentToMemberOf parameter specifies a distribution group. The rule is applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no action is taken.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentToScope</maml:name>
      <maml:description>
        <maml:para>The SentToScope parameter specifies whether the message is sent to internal, external, or partner recipients. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>InOrganization The recipients are internal to your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NotInOrganization The recipients are outside your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ExternalPartner The recipients are in a partner organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ExternalNonPartner The recipients are external to your organization, which isn't a partner organization.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</command:parameterValue>
      <dev:type>
        <maml:name>InOrganization | NotInOrganization | ExternalPartner | ExternalNonPartner</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SetAuditSeverity</maml:name>
      <maml:description>
        <maml:para>The SetAuditSeverity parameter specifies the severity level assigned to an incident report that's generated and the corresponding entry logged in the message tracking logs. You can specify one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DoNotAudit No audit entry is logged.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Low The audit entry is assigned low severity.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Medium The audit entry is assigned medium severity.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>High The audit entry is assigned high severity.</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SetHeaderName</maml:name>
      <maml:description>
        <maml:para>The SetHeaderName parameter specifies the SMTP header name to add or modify when the rule is applied. When the SetHeaderName parameter is used, you must also use the SetHeaderValue parameter to specify a value for the header.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderName</command:parameterValue>
      <dev:type>
        <maml:name>HeaderName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SetHeaderValue</maml:name>
      <maml:description>
        <maml:para>The SetHeaderValue parameter specifies a value for the header specified in the SetHeaderName parameter.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HeaderValue</command:parameterValue>
      <dev:type>
        <maml:name>HeaderValue</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SetSCL</maml:name>
      <maml:description>
        <maml:para>The SetSCL parameter modifies the SCL value of the message to the value specified. The SCL value can be a number from 0 through 9, or -1. The value -1 specifies that the message is from a trusted source.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SclValue</command:parameterValue>
      <dev:type>
        <maml:name>SclValue</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmtpRejectMessageRejectStatusCode</maml:name>
      <maml:description>
        <maml:para>The SmtpRejectMessageRejectStatusCode parameter specifies an enhanced status code to provide when rejecting a message.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RejectStatusCode</command:parameterValue>
      <dev:type>
        <maml:name>RejectStatusCode</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmtpRejectMessageRejectText</maml:name>
      <maml:description>
        <maml:para>The SmtpRejectMessageRejectText parameter specifies a text string to add to the rejection message. You must use this parameter with the SmtpRejectMessageRejectStatusCode parameter.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RejectText</command:parameterValue>
      <dev:type>
        <maml:name>RejectText</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>StopRuleProcessing</maml:name>
      <maml:description>
        <maml:para>The StopRuleProcessing parameter specifies whether the processing of subsequent rules should be stopped for this message.</maml:para>
        <maml:para>This parameter is used to define a rule action.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectContainsWords</maml:name>
      <maml:description>
        <maml:para>The SubjectContainsWords parameter specifies words to look for in the message subject.</maml:para>
        <maml:para>You can specify one or more words or phrases. When specifying more than one word or phrase, each word or phrase should be separated by a comma (,). When specifying a phrase that contains one or more spaces, you must enclose the phrase in quotation marks ("), for example:</maml:para>
        <maml:para>Word1,"Phrase with spaces",word2.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The SubjectMatchesPatterns parameter specifies text patterns to check for in the message subject for.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectOrBodyContainsWords</maml:name>
      <maml:description>
        <maml:para>The SubjectOrBodyContainsWords parameter specifies words to look for in the message subject or body. The rule is applied if any of the words or phrases specified is found in the message subject or body.</maml:para>
        <maml:para>You can specify one or more words or phrases. When specifying more than one word or phrase, each word or phrase should be separated by a comma (,). When specifying a phrase with one or more spaces, you must enclose the phrase in quotation marks ("), for example:</maml:para>
        <maml:para>Word1,"Phrase with spaces",word2.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectOrBodyMatchesPatterns</maml:name>
      <maml:description>
        <maml:para>The SubjectOrBodyMatchesPatterns parameter specifies text patterns to look for in the message subject or body. The rule is applied if the word specified is found in the message subject or body.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Pattern[]</command:parameterValue>
      <dev:type>
        <maml:name>Pattern[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UseLegacyRegex</maml:name>
      <maml:description>
        <maml:para>The UseLegacyRegex parameter specifies that the new rule uses the regular expressions compatible with Exchange Server 2010.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WithImportance</maml:name>
      <maml:description>
        <maml:para>The WithImportance parameter specifies message importance. The rule is applied to messages matching the specified importance. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>High</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Low</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Normal</maml:para>
        </command:listItem></command:list>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Low | Normal | High</command:parameterValue>
      <dev:type>
        <maml:name>Low | Normal | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a transport rule with the following condition:</maml:para>
        <maml:para />
        <maml:para>Between distribution list and distribution list The first condition property value is the distribution group Sales-Group. The second condition property value is the distribution group Brokerage-Group.</maml:para>
        <maml:para>The rule also has the following exceptions:</maml:para>
        <maml:para />
        <maml:para>With text patterns in the subject The value for this exception is Press Release or Corporate Communication.</maml:para>
        <maml:para>From people The values for this exception are the users Tony Smith and Pilar Ackerman.</maml:para>
        <maml:para>The following action will be applied to any messages that match the "Between distribution list and distribution list" condition, but doesn't match the "with text patterns in the subject" or "from people" exceptions:</maml:para>
        <maml:para />
        <maml:para>Send reject message to sender The value for this action is: Email messages sent between the Sales department and the Brokerage department are prohibited.</maml:para>
        <maml:para>New-TransportRule "BlockMessagesBetweenSalesAndBrokerage" -BetweenMemberOf1 "Sales-Group" -BetweenMemberOf2 "Brokerage-Group" -ExceptIfFrom "Tony Smith","Pilar Ackerman" -ExceptIfSubjectContainsWords "Press Release","Corporate Communication" -RejectMessageEnhancedStatusCode "5.7.1" -RejectMessageReasonText "Email messages sent between the Sales department and the Brokerage department are prohibited."</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Transport rule conditions and exceptions use one or more conditions along with the corresponding values to test for. For a list of supported transport rule conditions, see Transport rule conditions (predicates).</maml:para>
    <maml:para>Transport rules apply actions to messages, most with corresponding action values. For a list of supported transport rule actions, see Transport rule actions.</maml:para>
    <maml:para>For detailed information about how to create a transport rule, see Manage Transport Rules. For information about transport rules, see Transport rules.</maml:para>
    <maml:para>In on-premises Exchange organizations, Transport rules created on Mailbox servers are stored in Active Directory. All Mailbox servers in the organization have access to the same set of transport rules. On Edge Transport servers, transport rules are saved in the local copy of Active Directory Lightweight Directory Services (AD LDS). Transport rules aren't shared or replicated between Edge Transport servers or between Mailbox servers and Edge Transport servers. Also, Mailbox servers and Edge Transport servers share a set of common conditions and actions, but some conditions and actions are exclusive to each server role.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport rules" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/eb3546bf-ca37-474e-9c22-962fe95af276(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>f1b5c2d6-cfcd-4180-89f5-13723d87a1b4
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Disable-TransportRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Disable-TransportRule cmdlet to disable a specific transport rule for messages that pass through the Transport service on a Mailbox server.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Disable</command:verb>
    <command:noun>TransportRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Disable-TransportRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the rule you want to disable. Enter either the name or the GUID of the rule. You can omit the parameter label.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example disables the transport rule Sales-Disclaimer.</maml:para>
        <maml:para />
        <maml:para>Disable-TransportRule "Sales-Disclaimer"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can enable or disable specific transport rules at any time using the Disable-TransportRule and Enable-TransportRule cmdlets. To learn more about transport rules, see Transport rules.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport rules" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/f1b5c2d6-cfcd-4180-89f5-13723d87a1b4(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>f44e276c-b9cb-4bfc-a815-ab866446ffdd
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-DlpPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-DlpPolicy cmdlet to modify data loss prevention (DLP) policies in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>DlpPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-DlpPolicy</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Description</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mode</maml:name>
        <command:parameterValue required="True">Audit | AuditAndNotify | Enforce</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>State</maml:name>
        <command:parameterValue required="True">Enabled | Disabled</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the DLP policy you want to modify. You can use any value that uniquely identifies the DLP policy. For example, you can specify the name, GUID, or distinguished name (DN) of the DLP policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DlpPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Description</maml:name>
      <maml:description>
        <maml:para>The Description parameter specifies an optional description for the DLP policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mode</maml:name>
      <maml:description>
        <maml:para>The Mode parameter specifies the action and notification level of the DLP policy. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Audit: When a message matches the conditions specified by the DLP policy, the actions specified by the policy aren't enforced, and no notification emails are sent.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AuditAndNotify: When a message matches the conditions specified by the DLP policy, the actions specified by the policy aren't enforced, but notification emails are sent.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Enforce: When a message matches the conditions specified by the DLP policy, the actions specified by the policy are enforced, and notification emails are sent.</maml:para>
        </command:listItem></command:list>
        <maml:para>If the State parameter is set to Disabled, the value of the Mode parameter is irrelevant.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Audit | AuditAndNotify | Enforce</command:parameterValue>
      <dev:type>
        <maml:name>Audit | AuditAndNotify | Enforce</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the DLP policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>State</maml:name>
      <maml:description>
        <maml:para>The State parameter enables or disables the DLP policy. Valid input for this parameter is Enabled or Disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Enabled | Disabled</command:parameterValue>
      <dev:type>
        <maml:name>Enabled | Disabled</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example disables the DLP policy named Employee Numbers.</maml:para>
        <maml:para />
        <maml:para>Set-DlpPolicy "Employee Numbers" -State Disabled</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/f44e276c-b9cb-4bfc-a815-ab866446ffdd(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>f4628cfd-3628-4015-8e9e-274f4a331d01
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-TransportRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Remove-TransportRule cmdlet to remove a transport rule from your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>TransportRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-TransportRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the transport rule you want to remove. Enter either the name or the GUID of the rule.</maml:para>
        <maml:para>You can omit the parameter label.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes a single transport rule.</maml:para>
        <maml:para />
        <maml:para>Remove-TransportRule "Redirect messages from kim@contoso.com to legal@contoso.com"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>On Mailbox servers, the cmdlet removes the rule from Active Directory. On an Edge Transport server, the cmdlet removes the rule from the local Active Directory Lightweight Directory Services (AD LDS) instance.</maml:para>
    <maml:para>To temporarily disable a transport rule without removing it, use the Disable-TransportRule cmdlet instead.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport rules" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/f4628cfd-3628-4015-8e9e-274f4a331d01(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>f597aa65-baa7-49d0-8832-2a300073f211
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-HostedContentFilterPolicy</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-HostedContentFilterPolicy cmdlet to modify the settings of content filter policies in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>HostedContentFilterPolicy</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-HostedContentFilterPolicy</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">HostedContentFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AddXHeaderValue</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdminDisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DownloadLink</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableEndUserSpamNotifications</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableLanguageBlockList</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableRegionBlockList</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationCustomFromAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationCustomFromName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationCustomSubject</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationFrequency</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationLanguage</maml:name>
        <command:parameterValue required="True">Default | English | French | German | Italian | Japanese | Spanish | Korean | Portuguese | Russian | ChineseSimplified | ChineseTraditional | Amharic | Arabic | Bulgarian | BengaliIndia | Catalan | Czech | Cyrillic | Danish | Greek | Estonian | Basque | Farsi | Finnish | Filipino | Galician | Gujarati | Hebrew | Hindi | Croatian | Hungarian | Indonesian | Icelandic | Kazakh | Kannada | Lithuanian | Latvian | Malayalam | Marathi | Malay | Dutch | NorwegianNynorsk | Norwegian | Oriya | Polish | PortuguesePortugal | Romanian | Slovak | Slovenian | SerbianCyrillic | Serbian | Swedish | Swahili | Tamil | Telugu | Thai | Turkish | Ukrainian | Urdu | Vietnamese</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EndUserSpamNotificationLimit</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FalsePositiveAdditionalRecipients</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HighConfidenceSpamAction</maml:name>
        <command:parameterValue required="True">MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncreaseScoreWithBizOrInfoUrls</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncreaseScoreWithImageLinks</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncreaseScoreWithNumericIps</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncreaseScoreWithRedirectToOtherPort</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LanguageBlockList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MakeDefault</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamBulkMail</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamEmbedTagsInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamEmptyMessages</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamFormTagsInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamFramesInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamFromAddressAuthFail</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamJavaScriptInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamNdrBackscatter</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamObjectTagsInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamSensitiveWordList</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamSpfRecordHardFail</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MarkAsSpamWebBugsInHtml</maml:name>
        <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ModifySubjectValue</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QuarantineRetentionPeriod</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RedirectToRecipients</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RegionBlockList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SpamAction</maml:name>
        <command:parameterValue required="True">MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TestModeAction</maml:name>
        <command:parameterValue required="True">None | AddXHeader | BccMessage</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TestModeBccToRecipients</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the content filter policy you want to modify. You can use any value that uniquely identifies the policy. For example, you can specify the</maml:para>
        <maml:para>name, GUID or distinguished name (DN) of the content filter policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">HostedContentFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>HostedContentFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddXHeaderValue</maml:name>
      <maml:description>
        <maml:para>The AddXHeaderValue parameter specifies the X-header value to add to spam messages when an action parameter is set to the value AddXHeader. The action parameters that use the value of AddXHeaderValue are HighConfidenceSpamAction, and SpamAction. Note that when the TestModeAction parameter is set to AddXHeader, the X-header value X-CustomSpam: This message was filtered by the custom spam filter option is added to the message.</maml:para>
        <maml:para>An X-header is a user-defined, unofficial header field that exists in the message header. X-headers aren't specifically mentioned in RFC 2822, but the use of an undefined header field starting with X- has become an accepted way to add unofficial header fields to a message. The value you specify must contain less than 256 characters, and it can't contain spaces.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdminDisplayName</maml:name>
      <maml:description>
        <maml:para>The AdminDisplayName parameter specifies a description for the content filter policy. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DownloadLink</maml:name>
      <maml:description>
        <maml:para>The DownloadLink parameter shows or hides a link in end-user spam notification messages to download the Junk E-mail Reporting Tool plugin for Microsoft Outlook. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>This parameter is only useful if the EnableEndUserSpamNotifications parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableEndUserSpamNotifications</maml:name>
      <maml:description>
        <maml:para>The EnableEndUserSpamNotification parameter enables for disables sending end-user spam quarantine notification messages. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>End-user spam notification messages periodically alert users when they have messages in the quarantine. When you enable end-user spam notifications, you may also specify values for the EndUserSpamNotificationCustomFromAddress, EndUserSpamNotificationCustomFromName, and EndUserSpamNotificationCustomSubject parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableLanguageBlockList</maml:name>
      <maml:description>
        <maml:para>The EnableLanguageBlockList parameter enables or disables blocking email messages that are written in specific languages, regardless of the message contents. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>When you enable the language block list, you may specify one or more languages by using the LanguageBlockList parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableRegionBlockList</maml:name>
      <maml:description>
        <maml:para>The EnableRegionBlockList parameter enables or disables blocking email messages that are sent from specific countries or regions, regardless of the message contents. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>When you enable the region block list, you may specify one or more regions by using the RegionBlockList parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationCustomFromAddress</maml:name>
      <maml:description>
        <maml:para>The EndUserSpamNotificationCustomFromAddress parameter specifies a custom From address for end-user spam notification messages. Valid input for this parameter is an SMTP email address.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationCustomFromName</maml:name>
      <maml:description>
        <maml:para>The EndUserSpamNotificationCustomFromName parameter specifies a custom display name in the From field for end-user spam notification messages. If the value includes spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationCustomSubject</maml:name>
      <maml:description>
        <maml:para>The EndUserSpamNotificationCustomSubject parameter specifies a custom subject for end-user spam notification messages. If the value includes spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationFrequency</maml:name>
      <maml:description>
        <maml:para>The EndUserSpamNotificationFrequency parameter specifies the repeat interval in days that end-user spam notification messages are sent. Valid input for this parameter is an integer between 1 and 15. The default value is 3.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationLanguage</maml:name>
      <maml:description>
        <maml:para>The EndUserSpamNotificationLanguage parameter specifies the language of end-user spam notification messages. The default value is Default. This means the default language of end-user spam notification messages is the default language of the cloud-based organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Default | English | French | German | Italian | Japanese | Spanish | Korean | Portuguese | Russian | ChineseSimplified | ChineseTraditional | Amharic | Arabic | Bulgarian | BengaliIndia | Catalan | Czech | Cyrillic | Danish | Greek | Estonian | Basque | Farsi | Finnish | Filipino | Galician | Gujarati | Hebrew | Hindi | Croatian | Hungarian | Indonesian | Icelandic | Kazakh | Kannada | Lithuanian | Latvian | Malayalam | Marathi | Malay | Dutch | NorwegianNynorsk | Norwegian | Oriya | Polish | PortuguesePortugal | Romanian | Slovak | Slovenian | SerbianCyrillic | Serbian | Swedish | Swahili | Tamil | Telugu | Thai | Turkish | Ukrainian | Urdu | Vietnamese</command:parameterValue>
      <dev:type>
        <maml:name>Default | English | French | German | Italian | Japanese | Spanish | Korean | Portuguese | Russian | ChineseSimplified | ChineseTraditional | Amharic | Arabic | Bulgarian | BengaliIndia | Catalan | Czech | Cyrillic | Danish | Greek | Estonian | Basque | Farsi | Finnish | Filipino | Galician | Gujarati | Hebrew | Hindi | Croatian | Hungarian | Indonesian | Icelandic | Kazakh | Kannada | Lithuanian | Latvian | Malayalam | Marathi | Malay | Dutch | NorwegianNynorsk | Norwegian | Oriya | Polish | PortuguesePortugal | Romanian | Slovak | Slovenian | SerbianCyrillic | Serbian | Swedish | Swahili | Tamil | Telugu | Thai | Turkish | Ukrainian | Urdu | Vietnamese</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EndUserSpamNotificationLimit</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FalsePositiveAdditionalRecipients</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HighConfidenceSpamAction</maml:name>
      <maml:description>
        <maml:para>The HighConfidenceSpamAction parameter specifies the action to take when a message is very likely to be spam. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AddXHeader: The value specified by the AddXHeaderValue parameter is added to the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Delete</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ModifySubject: The value specified by the ModifySubjectValue parameter is prepended to the subject of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MoveToJmf: Move the message to the user's Junk E-mail Folder.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Quarantine: Move the message to the quarantine.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Redirect: Redirect the message to the recipients specified by the RedirectToRecipients parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is Quarantine.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</command:parameterValue>
      <dev:type>
        <maml:name>MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncreaseScoreWithBizOrInfoUrls</maml:name>
      <maml:description>
        <maml:para>The IncreaseScoreWithBizOrInfoUrls parameter increases the spam score of messages that contain links to .biz or .info domains. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncreaseScoreWithImageLinks</maml:name>
      <maml:description>
        <maml:para>The IncreaseScoreWithImageLinks parameter increases the spam score of messages that contain image links to remote websites. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncreaseScoreWithNumericIps</maml:name>
      <maml:description>
        <maml:para>The IncreaseScoreWithNumericIps parameter increases the spam score of messages that contain links to IP addresses. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncreaseScoreWithRedirectToOtherPort</maml:name>
      <maml:description>
        <maml:para>The IncreaseScoreWithRedirectToOtherPort parameter increases the spam score of messages that contain links that redirect to other TCP ports. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LanguageBlockList</maml:name>
      <maml:description>
        <maml:para>The LanguageBlockList parameter specifies the languages to block when messages are blocked based on their language. Valid input for this parameter is a supported ISO 639-1 lowercase two-letter language code. You can specify multiple values separated by commas. This parameter is only use when the EnableRegionBlockList parameter is set to $true.</maml:para>
        <maml:para>A reference for two-letter language codes is available at the Library of Congress website: ISO 639-2 Code (http://www.loc.gov/standards/iso639-2/php/code_list.php). Note that not all possible language codes are available as input for this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MakeDefault</maml:name>
      <maml:description>
        <maml:para>The MakeDefault switch makes the specified content filter policy the default content filter policy. You don't have to specify a value with this switch.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamBulkMail</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamBulkMail parameter classifies the message as spam when the message is identified as a bulk email message. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamEmbedTagsInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamEmbedTagsInHtml parameter classifies the message as spam when the message contains HTML &lt;embed&gt; tags. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamEmptyMessages</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamEmptyMessages parameter classifies the message as spam when the message is empty. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamFormTagsInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamFormTagsInHtml parameter classifies the message as spam when the message contains HTML &lt;form&gt; tags. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamFramesInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamFramesInHtml parameter classifies the message as spam when the message contains HTML &lt;frame&gt; or &lt;iframe&gt; tags. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamFromAddressAuthFail</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamFromAddressAuthFail parameter classifies the message as spam when Sender ID filtering encounters a hard fail. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamJavaScriptInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamJavaScriptInHtml parameter classifies the message as spam when the message contains JavaScript or VBScript. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamNdrBackscatter</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamNdrBackscatter parameter classifies the message as spam when the message is a non-delivery report (NDR) to a forged sender. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamObjectTagsInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamObjectTagsInHtml parameter classifies the message as spam when the message contains HTML &lt;object&gt; tags. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamSensitiveWordList</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamSensitiveWordList parameter classifies the message as spam when the message contains words from the sensitive words list. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamSpfRecordHardFail</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamFromAddressAuthFail parameter classifies the message as spam when Sender Policy Framework (SPF) record checking encounters a hard fail. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MarkAsSpamWebBugsInHtml</maml:name>
      <maml:description>
        <maml:para>The MarkAsSpamWebBugsInHtml parameter classifies the message as spam when the message contains web bugs. Valid values for this parameter are Off, On or Test. The default value is Off.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Off | On | Test</command:parameterValue>
      <dev:type>
        <maml:name>Off | On | Test</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ModifySubjectValue</maml:name>
      <maml:description>
        <maml:para>The ModifySubjectValue parameter specifies the text to prepend to the existing subject of spam messages when an action parameter is set to the value ModifySubject. The action parameters that use the value of ModifySubjectValue are HighConfidenceSpamAction and SpamAction.</maml:para>
        <maml:para>The value you specify must contain less than 256 characters If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QuarantineRetentionPeriod</maml:name>
      <maml:description>
        <maml:para>The QuarantineRetentionPeriod parameter specifies the length of time in days that spam messages remain in the quarantine. Valid input for this parameter is an integer between 1 and 15. The default value is 15.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RedirectToRecipients</maml:name>
      <maml:description>
        <maml:para>The RedirectToRecipients parameter specifies the replacement recipients in spam messages when an action parameter is set to the value Redirect. The action parameters that use the value of RedirectToRecipients are HighConfidenceSpamAction and SpamAction.</maml:para>
        <maml:para>Valid input for this parameter is an email address. Separate multiple email addresses with commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RegionBlockList</maml:name>
      <maml:description>
        <maml:para>The RegionBlockList parameter specifies the region to block when messages are blocked based on their source region. Valid input for this parameter is a supported ISO 3166-1 uppercase two-letter country code. You can specify multiple values separated by commas. This parameter is only used when the EnableRegionBlockList parameter is set to $true.</maml:para>
        <maml:para>A reference for two-letter country codes is available at the International Organization for Standardization (ISO) website: ISO 3166-1 decoding table (http://www.iso.org/iso/country_codes/iso-3166-1_decoding_table.htm). Note that not all possible country codes are available as input for this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SpamAction</maml:name>
      <maml:description>
        <maml:para>The SpamAction parameter specifies the action to take on messages that may be spam. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AddXHeader: The value specified by the AddXHeaderValue parameter is added to the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Delete</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ModifySubject: The value specified by the ModifySubjectValue parameter is prepended to the subject of the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MoveToJmf: Move the message to the user's Junk E-mail Folder.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Quarantine</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Redirect: Redirect the message to the recipients specified by the RedirectToRecipients parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is Quarantine.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</command:parameterValue>
      <dev:type>
        <maml:name>MoveToJmf | AddXHeader | ModifySubject | Redirect | Delete | Quarantine</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TestModeAction</maml:name>
      <maml:description>
        <maml:para>The TestModeAction parameter specifies the additional action to take on messages that match any of the IncreaseScoreWith or MarkAsSpam parameters that are set to the value Test. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AddXHeader: The X-header value X-CustomSpam: This message was filtered by the custom spam filter option is added to the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>BccMessage: Redirect the message to the recipients specified by the TestModeBccToRecipients parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is None.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | AddXHeader | BccMessage</command:parameterValue>
      <dev:type>
        <maml:name>None | AddXHeader | BccMessage</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TestModeBccToRecipients</maml:name>
      <maml:description>
        <maml:para>The TestModeBccToRecipients parameter specifies the blind carbon copy recipients to add to spam messages when the TestModeAction action parameter is set to the value BccMessage.</maml:para>
        <maml:para>Valid input for this parameter is an email address. Separate multiple email addresses with commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the content filter policy named Contoso Content Filter Policy with the following settings:</maml:para>
        <maml:para />
        <maml:para>Redirect messages that are definitely spam or that may be spam to chris@contoso.com.</maml:para>
        <maml:para>Send copies of spam quarantine false positive submissions to michelle@contoso.com.</maml:para>
        <maml:para>Set-HostedContentFilterPolicy -Identity "Contoso Content Filter Policy" -HighConfidenceSpamAction Redirect -SpamAction Redirect -RedirectToRecipients chris@contoso.com -FalsePositiveAdditionalRecipients michelle@contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-spam" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/f597aa65-baa7-49d0-8832-2a300073f211(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>f5d6be2b-25c4-427a-9d09-6ed55858c891
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-MalwareFilterRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-MalwareFilterRule cmdlet to modify malware filter rules in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>MalwareFilterRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-MalwareFilterRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comments</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfRecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExceptIfSentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MalwareFilterPolicy</maml:name>
        <command:parameterValue required="True">MalwareFilterPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Priority</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientDomainIs</maml:name>
        <command:parameterValue required="True">Word[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentToMemberOf</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the malware filter rule that you want to view. You can use any value that uniquely identifies the rule. For example, you can use the name, GUID, or distinguished name (DN) of the malware filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comments</maml:name>
      <maml:description>
        <maml:para>The Comments parameter specifies informative comments for the rule, such as what the rule is used for or how it has changed over time. The length of the comment can't exceed 1024 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfRecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The ExceptIfRecipientDomainIs parameter specifies the recipient's domain. The rule isn't applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentTo</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentTo parameter specifies a recipient. The rule isn't applied to messages sent to the specified recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExceptIfSentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The ExceptIfSentToMemberOf parameter specifies a distribution group. The rule isn't applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no exception is made.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MalwareFilterPolicy</maml:name>
      <maml:description>
        <maml:para>The MalwareFilterPolicy parameter specifies the malware filter policy to apply to messages that match the conditions defined by this malware filter rule.</maml:para>
        <maml:para>You can use any value that uniquely identifies the policy. For example, you can specify the name, GUID, or distinguished name (DN) of the content filter policy.</maml:para>
        <maml:para>You can't specify the default malware filter policy. And, you can't specify a malware filter policy that's already associated with another malware filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MalwareFilterPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MalwareFilterPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the malware filter rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Priority</maml:name>
      <maml:description>
        <maml:para>The Priority parameter specifies the priority for this rule. Rules with a lower priority value are processed first. If you modify the priority of the rule, the position of the rule in the rule list changes to match the priority that you specified.</maml:para>
        <maml:para>The value of this parameter must be greater than or equal to 0, and must be one less than the total number of rules in your organization. For example, if you configured 8 rules, you can set this parameter to any value from 0 through 7.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientDomainIs</maml:name>
      <maml:description>
        <maml:para>The RecipientDomainIs parameter specifies the recipient's domain. The rule is applied to messages sent to recipients whose email addresses are in the specified domain.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Word[]</command:parameterValue>
      <dev:type>
        <maml:name>Word[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentTo</maml:name>
      <maml:description>
        <maml:para>The SentTo parameter specifies a recipient. The rule is applied to messages sent to the specified recipient.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentToMemberOf</maml:name>
      <maml:description>
        <maml:para>The SentToMemberOf parameter specifies a distribution group. The rule is applied to messages where any recipient is a member of the specified group.</maml:para>
        <maml:para>If the distribution group is removed after creation of the rule, no action is taken.</maml:para>
        <maml:para>This parameter is used to define a rule condition.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example adds an exception to the malware filter rule named Contoso Recipients for members of the distribution group named Contoso Human Resources.</maml:para>
        <maml:para />
        <maml:para>Set-MalwareFilterRule "Contoso Recipients" -ExceptIfSentToMemberOf "Contoso Human Resources"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Anti-malware" entry in the Anti-spam and anti-malware permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/f5d6be2b-25c4-427a-9d09-6ed55858c891(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>f6a0aedc-8aac-4c0a-9a4d-09a4823604b6
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Export-DlpPolicyCollection</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Export-DlpPolicyCollection cmdlet to export data loss prevention (DLP) policy collections from your organization to a file.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Export</command:verb>
    <command:noun>DlpPolicyCollection</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Export-DlpPolicyCollection</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the DLP policy you want to export. You can use any value that uniquely identifies the DLP policy. For example, you can specify the name, GUID, or distinguished name (DN) of the DLP policy.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DlpPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DlpPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example exports all the elements of the existing DLP policies to the file C:\My Documents\Contoso PII.xml.</maml:para>
        <maml:para />
        <maml:para>$file = Export-DlpPolicyCollection</maml:para>
        <maml:para>Set-Content -Path "C:\My Documents\Contoso PII.xml" -Value $file.FileData -Encoding Byte</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Export-DlpPolicyCollection cmdlet exports the settings of the DLP policies and the associated transport rules. You use the Import-DlpPolicyCollection to import the DLP policy collection into your organization.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/f6a0aedc-8aac-4c0a-9a4d-09a4823604b6(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>f9140086-9f74-4446-b1e7-b195300da122
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-OutboundConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-OutboundConnector cmdlet to view the configuration information for an Outbound connector in your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>OutboundConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-OutboundConnector</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OutboundConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsTransportRuleScoped</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the Outbound connector you want to view.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OutboundConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OutboundConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsTransportRuleScoped</maml:name>
      <maml:description>
        <maml:para>The IsTransportRuleScoped parameter shows or hides the Outbound connectors that are scoped to transport rules. Valid input for this parameter is $true or $false. The default value is $false. To view only the Outbound connectors that are scoped to transport rules, set the value to $true.</maml:para>
        <maml:para>A transport rule is scoped to a specific Outbound connector using the RouteMessageOutboundConnector parameter on the New-TransportRule or Set-TransportRule cmdlets.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed information about the Outbound connector named Contoso Outbound Connector.</maml:para>
        <maml:para />
        <maml:para>Get-OutboundConnector "Contoso Outbound Connector" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Outbound connectors send email messages to remote domains that require specific configuration options.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbound and Outbound connectors" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/f9140086-9f74-4446-b1e7-b195300da122(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>f9748fab-1740-460b-9df6-4b438007dd48
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-InboxRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Remove-InboxRule cmdlet to remove an Inbox rule.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>InboxRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-InboxRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">InboxRuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AlwaysDeleteOutlookRulesBlob</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the Inbox rule to be removed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">InboxRuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>InboxRuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AlwaysDeleteOutlookRulesBlob</maml:name>
      <maml:description>
        <maml:para>The AlwaysDeleteOutlookRulesBlob parameter suppresses a warning that end users or administrators get if they use Outlook Web App or Windows PowerShell to modify Inbox rules.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress the confirmation prompt produced if rules created by Microsoft Office Outlook exist on the mailbox. When taking an action using Inbox rules on Microsoft Exchange Server 2013, any client-side rules are removed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the mailbox to which the Inbox rule belongs. You can use one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Domain\Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User principal name (UPN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SmtpAddress</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the Inbox rule ProjectA-MoveToFolderA from the mailbox Joe@Contoso.com.</maml:para>
        <maml:para />
        <maml:para>Remove-InboxRule -Mailbox Joe@Contoso.com -Identity "ProjectA-MoveToFolderA"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes all Inbox rules from the mailbox Joe@Contoso.com.</maml:para>
        <maml:para />
        <maml:para>Get-InboxRule -Mailbox "Joe@Contoso.com" | Remove-InboxRule</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbox rules" entry in the Recipients Permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/f9748fab-1740-460b-9df6-4b438007dd48(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>fd4f9f4a-338d-44de-b5e8-e91bae697d4f
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-TransportServer</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-TransportServer cmdlet to view the transport configuration information for the Transport service on Mailbox servers or for Edge Transport servers.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>TransportServer</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-TransportServer</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">TransportServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server you want to view. When you use this parameter on a Mailbox server, the parameter returns the transport configuration of the Transport service on specified server. You can't use this parameter on an Edge Transport server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TransportServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>TransportServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example provides different results depending on the server role on which it's run. When you run this command on an Edge Transport server, it provides a configuration summary for the local server. Otherwise, it displays a list of all Mailbox servers in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-TransportServer</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves the detailed transport configuration information for the Transport service on the Mailbox server named Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Get-TransportServer Mailbox01 | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-TransportServer cmdlet will be removed in a future version of Exchange. You should use the Get-TransportService cmdlet instead.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport service" or "Edge Transport server" entries in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/fd4f9f4a-338d-44de-b5e8-e91bae697d4f(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command></HelpItems>
