<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<HelpItems xmlns="http://msh" schema="maml">
<!-- Product Build Version: 15.00.0995.021 -->
<!-- Doc Build Version: 15.0.14209.2101 -->
<!-- Date/Time Created (UTC): 2014-07-29 16:49:41.920-->
00acaba4-66ee-454a-b9db-fe6d80c13f28
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Test-Mailflow</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Test-Mailflow cmdlet to diagnose whether mail can be successfully sent from and delivered to the system mailbox on a Mailbox server. You can also use this cmdlet to verify that email is sent between Mailbox servers within a defined latency threshold.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Test</command:verb>
    <command:noun>Mailflow</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Test-Mailflow</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveDirectoryTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ErrorLatency</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExecutionTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MonitoringContext</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Test-Mailflow</maml:name>
      <command:parameter required="True">
        <maml:name>TargetDatabase</maml:name>
        <command:parameterValue required="True">DatabaseIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveDirectoryTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ErrorLatency</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExecutionTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MonitoringContext</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Test-Mailflow</maml:name>
      <command:parameter required="True">
        <maml:name>TargetMailboxServer</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveDirectoryTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ErrorLatency</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExecutionTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MonitoringContext</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Test-Mailflow</maml:name>
      <command:parameter required="True">
        <maml:name>TargetEmailAddress</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TargetEmailAddressDisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveDirectoryTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ErrorLatency</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExecutionTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MonitoringContext</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Test-Mailflow</maml:name>
      <command:parameter required="True">
        <maml:name>AutoDiscoverTargetMailboxServer</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveDirectoryTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ErrorLatency</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExecutionTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MonitoringContext</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Test-Mailflow</maml:name>
      <command:parameter required="True">
        <maml:name>CrossPremises</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CrossPremisesExpirationTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CrossPremisesPendingErrorCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActiveDirectoryTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ErrorLatency</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExecutionTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MonitoringContext</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AutoDiscoverTargetMailboxServer</maml:name>
      <maml:description>
        <maml:para>The AutoDiscoverTargetMailboxServer switch specifies whether to automatically populate a list of target Mailbox servers to which to send a test message. The task queries Active Directory to discover all Mailbox servers and then sends each server a test message.</maml:para>
        <maml:para>When you use this switch, you can't use the CrossPremises, TargetDatabase, TargetEmailAddress or TargetMailboxServer parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CrossPremises</maml:name>
      <maml:description>
        <maml:para>The CrossPremises parameter specifies whether the mail flow test will be conducted in cross-premises mode.</maml:para>
        <maml:para>Set this parameter to $true if your organization is using a cross-premises deployment and you want to verify cross-premises mail flow.</maml:para>
        <maml:para>When you use this parameter, you can't use the AutoDiscoverTargetMailboxServer, TargetDatabase, TargetEmailAddress or TargetMailboxServer parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetDatabase</maml:name>
      <maml:description>
        <maml:para>The TargetDatabase parameter specifies the mailbox database to which test messages are sent.</maml:para>
        <maml:para>When you use this parameter, you can't use the AutoDiscoverTargetMailboxServer, CrossPremises, TargetEmailAddress or TargetMailboxServer parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DatabaseIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DatabaseIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetEmailAddress</maml:name>
      <maml:description>
        <maml:para>The TargetEmailAddress parameter specifies the SMTP address of the mailbox to which test messages are sent. Use this parameter to send test messages to a Mailbox server in a remote forest. If this parameter is used, the test is always a remote test.</maml:para>
        <maml:para>When you use this parameter, you can't use the AutoDiscoverTargetMailboxServer, CrossPremises, TargetDatabase or TargetMailboxServer parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetMailboxServer</maml:name>
      <maml:description>
        <maml:para>The TargetMailboxServer parameter specifies one or more Mailbox servers in the local Exchange organization to which test messages are sent.</maml:para>
        <maml:para>When you use this parameter, you can't use the AutoDiscoverTargetMailboxServer, CrossPremises, TargetDatabase or TargetEmailAddress parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActiveDirectoryTimeout</maml:name>
      <maml:description>
        <maml:para>The ActiveDirectoryTimeout parameter specifies the number of seconds that elapse before the task provides an informational message about the delay. The default value is 15 seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CrossPremisesExpirationTimeout</maml:name>
      <maml:description>
        <maml:para>The CrossPremisesExpirationTimeout parameter is used when this cmdlet is run by Microsoft System Center Operations Manager 2007 agents for asynchronous monitoring. We don't recommend using this parameter when running this cmdlet manually.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CrossPremisesPendingErrorCount</maml:name>
      <maml:description>
        <maml:para>The CrossPremisesPendingErrorCount parameter is used when this cmdlet is run by System Center Operations Manager 2007 agents for asynchronous monitoring. We don't recommend using this parameter when running this cmdlet manually.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ErrorLatency</maml:name>
      <maml:description>
        <maml:para>The ErrorLatency parameter specifies how long to wait for a test message to be delivered before an error event is logged in Microsoft System Center Operations Manager 2007. The default value when a test message is sent to the local Mailbox server is 15 seconds and 180 seconds when a test message is sent to a remote Mailbox server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExecutionTimeout</maml:name>
      <maml:description>
        <maml:para>The ExecutionTimeout parameter specifies the maximum time that this task can run before the test is determined to be a failure. If no test message or delivery report arrives before this time expires, the task ends and an error is reported. When the task is run in the Exchange Management Shell, the default setting is 240 seconds. When the MonitoringContext parameter is used, the default setting is 15 seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the source Mailbox server name from which a test message is sent. If you don't use this parameter, the local Mailbox server is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MonitoringContext</maml:name>
      <maml:description>
        <maml:para>The MonitoringContext parameter includes or excludes the associated monitoring events and performance counters in the results. Valid input for this parameter is $true or $false. The default value is $false. If you specify the value $true, the monitoring events and performance counters are included in the command results. Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager 2007 or System Center 2012 - Operations Manager.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetEmailAddressDisplayName</maml:name>
      <maml:description>
        <maml:para>The TargetEmailAddressDisplayName parameter specifies a custom display name that's used on events and reports in Microsoft System Center Operations Manager 2007 when the TargetEmailAddress parameter is used. If you don't use the TargetEmailAddressDisplayName parameter, the events and reports use the email address value specified by the TargetEmailAddress parameter.</maml:para>
        <maml:para>This parameter is available only with the TargetEmailAddress parameter, and has no effect on the output of the cmdlet outside of Microsoft System Center Operations Manager.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example tests message flow from the server name Mailbox1 to the server named Mailbox2. Note that you need to run this command while connected to Mailbox1.</maml:para>
        <maml:para />
        <maml:para>Test-Mailflow Mailbox1 -TargetMailboxServer Mailbox2</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example tests message flow from the local Mailbox server where you're running this command to the email address john@contoso.com.</maml:para>
        <maml:para />
        <maml:para>Test-Mailflow -TargetEmailAddress john@contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Test-Mailflow cmdlet tests mail submission, transport, and delivery. The cmdlet verifies that each Mailbox server can successfully send itself a message. You can also use this cmdlet to verify that the system mailbox on one Mailbox server can successfully send a message to the system mailbox on another Mailbox server. A system mailbox is required on all servers that are involved in the test.</maml:para>
    <maml:para>The test messages are available in the target user or system mailbox. The message subject is Test-Mailflow &lt;GUID&gt;, and the message body contains the text This is a Test-Mailflow probe message.</maml:para>
    <maml:para>The Test-Mailflow results are displayed on-screen. The interesting values in the results are:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>TestMailflowResult The values returned are typically Success or *FAILURE*.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>MessageLatencyTime The time required to complete the test (deliver the test message). The value uses the syntax hh:mm:ss.ffff where hh = hours, mm = minutes, ss = seconds and ffff = fractions of a second.</maml:para>
    </command:listItem></command:list>
    <maml:para>You can write the Test-Mailflow results to a file by piping the output to ConvertTo-Html or ConvertTo-Csv and adding "&gt; &lt;filename&gt;" to the command. For example:</maml:para>
    <maml:para>Test-Mailflow -AutoDiscoverTargetMailboxServer | ConvertTo-Csv &gt; "C:\My Documents\test-mailflow 2014-05-01.csv"</maml:para>
    <dev:code />
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Testing mail flow" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/00acaba4-66ee-454a-b9db-fe6d80c13f28(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>04990a05-da71-43e7-9ba8-859a088891d4
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-HotmailSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>The New-HotmailSubscription cmdlet allows a user to create Hotmail account subscriptions in their own cloud-based mailbox. An administrator can't use this cmdlet to create subscriptions in another user's mailbox.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>HotmailSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-HotmailSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>EmailAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Password</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EmailAddress</maml:name>
      <maml:description>
        <maml:para>The EmailAddress parameter specifies the email address of the Hotmail mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the name of the Hotmail subscription. The name of the subscription doesn't have to be globally unique. The name must be unique compared to other subscriptions that exist in the same mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Password</maml:name>
      <maml:description>
        <maml:para>The Password parameter specifies the password used to sign in to the Hotmail mailbox. You must specify the value for this parameter in a secure format, for example, (ConvertTo-SecureString -String '&lt;password&gt;' -AsPlainText -Force).</maml:para>
      </maml:description>
      <command:parameterValue required="True">SecureString</command:parameterValue>
      <dev:type>
        <maml:name>SecureString</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplayName</maml:name>
      <maml:description>
        <maml:para>The DisplayName parameter specifies the friendly name of the Hotmail subscription. If you don't specify a value for the DisplayName parameter, the value of the EmailAddress parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that will contain the Hotmail subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the Hotmail subscription Ayla's Hotmail in the mailbox of the user Ayla Kol. The Hotmail account has the following details:</maml:para>
        <maml:para />
        <maml:para>Email address: ayla@fabrikam.com</maml:para>
        <maml:para>Password: Pa$$word1</maml:para>
        <maml:para>New-HotmailSubscription -Name "Ayla's Hotmail" -EmailAddress ayla@fabrikam.com -Password (ConvertTo-SecureString -String 'Pa$$word1' -AsPlainText -Force)</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The New-HotmailSubscription cmdlet creates a connection between a user's mailbox in the cloud-based service and a remote Hotmail mailbox. The cloud-based mailbox periodically polls the Hotmail mailbox for new messages.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/04990a05-da71-43e7-9ba8-859a088891d4(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>0864f701-484d-4a57-9291-ea63e25c1f1b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-EdgeSyncServiceConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-EdgeSyncServiceConfig cmdlet to retrieve the edge synchronization services settings that control the general synchronization behavior shared by all Microsoft Exchange EdgeSync services.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>EdgeSyncServiceConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-EdgeSyncServiceConfig</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">EdgeSyncServiceConfigIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Site</maml:name>
        <command:parameterValue required="True">AdSiteIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the Microsoft Exchange EdgeSync service configuration you want to view.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EdgeSyncServiceConfigIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>EdgeSyncServiceConfigIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Site</maml:name>
      <maml:description>
        <maml:para>The Site parameter specifies the Active Directory site that EdgeSync connects to for synchronizing configuration and recipient data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AdSiteIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AdSiteIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example reads the configuration of the Microsoft Exchange EdgeSync service settings named Primary EdgeSync Settings from Active Directory and displays all its properties in a list format.</maml:para>
        <maml:para />
        <maml:para>Get-EdgeSyncServiceConfig "Primary EdgeSync Settings" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "EdgeSync" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/0864f701-484d-4a57-9291-ea63e25c1f1b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>08bcaaec-51e3-447d-b3bf-406a705c64b4
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-AcceptedDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-AcceptedDomain cmdlet to create an accepted domain in your organization. An accepted domain is any SMTP namespace for which an Exchange organization sends and receives email.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>AcceptedDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-AcceptedDomain</maml:name>
      <command:parameter required="True">
        <maml:name>DomainName</maml:name>
        <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AuthenticationType</maml:name>
        <command:parameterValue required="True">Managed | Federated</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CatchAllRecipient</maml:name>
        <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainType</maml:name>
        <command:parameterValue required="True">Authoritative | ExternalRelay | InternalRelay</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InitialDomain</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveIdInstanceType</maml:name>
        <command:parameterValue required="True">Consumer | Business</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailFlowPartner</maml:name>
        <command:parameterValue required="True">MailFlowPartnerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MatchSubDomains</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OutboundOnly</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SkipDnsProvisioning</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainName</maml:name>
      <maml:description>
        <maml:para>The DomainName parameter specifies the SMTP domain that you want to establish as an accepted domain. Valid input for the DomainName parameter is an SMTP domain. You can use a wildcard character to specify all subdomains of a specified domain, as shown in the following example: *.contoso.com.</maml:para>
        <maml:para>However, you can't embed a wildcard character, as shown in the following example: domain.*.contoso.com. The domain name string may not contain more than 256 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      <dev:type>
        <maml:name>SmtpDomainWithSubdomains</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the accepted domain object.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AuthenticationType</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Managed | Federated</command:parameterValue>
      <dev:type>
        <maml:name>Managed | Federated</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CatchAllRecipient</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainType</maml:name>
      <maml:description>
        <maml:para>The DomainType parameter specifies the type of accepted domain that you want to configure. Valid values are Authoritative, InternalRelay, or ExternalRelay. You must set at least one value.</maml:para>
        <maml:para>In an authoritative domain, messages are delivered to a recipient that has a domain account in your Exchange organization. In an internal relay domain, messages are relayed to a server outside your Exchange organization, but still under the authority of your company or IT department. Use the internal relay domain if you want to treat the messages to this domain as internal messages. In an external relay domain, messages are relayed to an email server, outside your organization, which you don't control.</maml:para>
        <maml:para>The default value is Authoritative.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Authoritative | ExternalRelay | InternalRelay</command:parameterValue>
      <dev:type>
        <maml:name>Authoritative | ExternalRelay | InternalRelay</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InitialDomain</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LiveIdInstanceType</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Consumer | Business</command:parameterValue>
      <dev:type>
        <maml:name>Consumer | Business</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailFlowPartner</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailFlowPartnerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailFlowPartnerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MatchSubDomains</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OutboundOnly</maml:name>
      <maml:description>
        <maml:para>The OutboundOnly parameter specifies whether this accepted domain is an internal relay domain for the on-premises deployment for organizations that have coexistence with a cloud-based organization.</maml:para>
        <maml:para>The authoritative accepted domain for the on-premises deployment is configured as an internal relay accepted domain on the cloud side. If the on-premises deployment is using Microsoft Forefront Online Protection for Exchange, you must set this parameter to $true for the accepted domain that represents your on-premises deployment. This parameter is used only if the DomainType parameter is set to Authoritative or InternalRelay. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SkipDnsProvisioning</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the new authoritative accepted domain Contoso.</maml:para>
        <maml:para />
        <maml:para>New-AcceptedDomain -DomainName Contoso.com -DomainType Authoritative -Name Contoso</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Accepted domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/08bcaaec-51e3-447d-b3bf-406a705c64b4(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>0b1629a0-9ee1-4c4b-bc4d-37a4d3547f70
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-ReceiveConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-ReceiveConnector cmdlet to delete a Receive connector.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>ReceiveConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-ReceiveConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ReceiveConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the GUID or connector name that represents a specific Receive connector. You can also include the server name by using the format ServerName\ConnectorName.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ReceiveConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ReceiveConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example deletes the Receive connector Contoso.com Receive Connector.</maml:para>
        <maml:para />
        <maml:para>Remove-ReceiveConnector "Contoso.com Receive Connector"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Remove-ReceiveConnector cmdlet deletes the object and the configuration information for a Receive connector.</maml:para>
    <maml:para>Deleting a Receive connector may affect mail flow throughout the organization.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Receive connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/0b1629a0-9ee1-4c4b-bc4d-37a4d3547f70(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>0db98a12-8cbb-4e9a-add4-c1847b057a44
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Test-ArchiveConnectivity</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Test-ArchiveConnectivity cmdlet to verify archive functionality for a mailbox user.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Test</command:verb>
    <command:noun>ArchiveConnectivity</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Test-ArchiveConnectivity</maml:name>
      <command:parameter required="True">
        <maml:name>UserSmtp</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeArchiveMRMConfiguration</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>UserSmtp</maml:name>
      <maml:description>
        <maml:para>The UserSmtp parameter specifies the SMTP address of the mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeArchiveMRMConfiguration</maml:name>
      <maml:description>
        <maml:para>The IncludeArchiveMRMConfiguration switch retrieves retention tags provisioned in the user's archive mailbox and the last time the archive was processed by the Managed Folder Assistant.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageId</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example tests archive connectivity to Gurinder Singh's archive.</maml:para>
        <maml:para />
        <maml:para>Test-ArchiveConnectivity -UserSmtp gsingh@contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This command retrieves mailboxes that have a cloud-based archive provisioned and tests archive connectivity for each mailbox.</maml:para>
        <maml:para />
        <maml:para>Get-Mailbox -Filter {ArchiveGuid -ne $null -and ArchiveDomain -ne $null} -ResultSize Unlimited | Test-ArchiveConnectivity</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Running the Test-ArchiveConnectivity cmdlet validates connectivity to a user's archive mailbox. End-to-end verification includes testing whether an on-premises or cloud-based archive is provisioned for the on-premises mailbox user and whether it's enabled and logging on to the archive mailbox on behalf of the user. Successful completion of the command indicates that processes such as the Managed Folder Assistant and Microsoft Office Outlook Web App are able to successfully access the archive mailbox.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "In-Place Archive - Test connectivity" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/0db98a12-8cbb-4e9a-add4-c1847b057a44(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>0fffc597-7b46-4bc3-915c-f00c9eb56b40
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Export-ExchangeCertificate</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Export-ExchangeCertificate cmdlet to export an existing certificate from the certificate store on the local computer. You can export a certificate with its private key or a certificate request file.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Export</command:verb>
    <command:noun>ExchangeCertificate</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Export-ExchangeCertificate</maml:name>
      <command:parameter required="True">
        <maml:name>Thumbprint</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BinaryEncoded</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FileName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Password</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Export-ExchangeCertificate</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ExchangeCertificateIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BinaryEncoded</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FileName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Password</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Thumbprint</maml:name>
      <maml:description>
        <maml:para>The Thumbprint parameter specifies the thumbprint of the certificate that you're exporting. Each certificate contains a thumbprint, which is the digest of the certificate data. It can be retrieved by using the Get-ExchangeCertificate cmdlet.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BinaryEncoded</maml:name>
      <maml:description>
        <maml:para>The BinaryEncoded parameter specifies how the exported file is encoded. By default, this command creates a Base64-encoded file.</maml:para>
        <maml:para>To create a DER-encoded file, set this parameter to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FileName</maml:name>
      <maml:description>
        <maml:para>The FileName parameter specifies the name of the file that will contain the exported certificate.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the certificate ID.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExchangeCertificateIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ExchangeCertificateIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Password</maml:name>
      <maml:description>
        <maml:para>The Password parameter specifies the password for the private key that's exported with this command. Use the Get-Credential cmdlet to store the password variable.</maml:para>
        <maml:para>The Get-Credential cmdlet will prompt you for a user name and password, but only the password field is used to export or import the certificate. Therefore, you don't have to use a real domain name or user name in the Name field. For implementation details, see "Examples" later in this topic.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SecureString</command:parameterValue>
      <dev:type>
        <maml:name>SecureString</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the server name from which you want to export the certificate.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example exports a certificate specified by its thumbprint, along with the private key, to a file named htcert.pfx in the certificates directory on a Hub Transport server. The exported certificate is DER-encoded. A password is required when exporting a certificate with its private key.</maml:para>
        <maml:para />
        <maml:para>The following command uses the Export-ExchangeCertificate cmdlet to export certificate data to the variable $file.</maml:para>
        <maml:para />
        <maml:para>$file = Export-ExchangeCertificate -Thumbprint 5113ae0233a72fccb75b1d0198628675333d010e -BinaryEncoded:$true -Password (Get-Credential).password</maml:para>
        <maml:para>The following command uses the Set-Content cmdlet to write data stored in the variable $file to the file htcert.pfx.</maml:para>
        <maml:para />
        <maml:para>Set-Content -Path "c:\certificates\htcert.pfx" -Value $file.FileData -Encoding Byte</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Export-ExchangeCertificate cmdlet creates either of the following files:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>PKCS #10 file If the thumbprint specified in the command points to a certificate request, the Export-ExchangeCertificate cmdlet creates a PKCS #10 file. A thumbprint is the digest of the certificate data. PKCS #10 is the Certification Request Syntax standard specified by RFC 2314. For more information, see PKCS #10: Certification Request Syntax (http://www.ietf.org/rfc/rfc2314.txt).</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>PKCS #12 file If the thumbprint specified in the command points to an actual certificate, the Export-ExchangeCertificate cmdlet creates a PKCS #12 file. PKCS #12 is the Personal Information Exchange Syntax standard specified by RSA Laboratories. For more information, see PKCS #12: Personal Information Exchange Syntax Standard (http://www.rsasecurity.com/rsalabs/node.asp?id=2138).</maml:para>
      <maml:para>When you use the Export-ExchangeCertificate cmdlet, you must export certificate data to a variable, as shown in "Examples" later in this topic, and then use the Set-Content cmdlet to write the data to a file. For more information about the Set-Content cmdlet, see Set-Content (http://go.microsoft.com/fwlink/p/?linkID=156132).</maml:para>
    </command:listItem></command:list>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Certificate management" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/0fffc597-7b46-4bc3-915c-f00c9eb56b40(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>111b71d0-75f2-45b2-a9c9-b4ff51af57b7
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-ForeignConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-ForeignConnector cmdlet to create a new Foreign connector in the Transport service of a Mailbox server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>ForeignConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-ForeignConnector</maml:name>
      <command:parameter required="True">
        <maml:name>AddressSpaces</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsScopedConnector</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SourceTransportServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddressSpaces</maml:name>
      <maml:description>
        <maml:para>The AddressSpaces parameter specifies the domain names to which the Foreign connector sends messages. The complete syntax for entering each address space is as follows: &lt;AddressSpaceType&gt;:&lt;AddressSpace&gt;;&lt;AddressSpaceCost&gt;</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AddressSpaceType: The address space type may be SMTP, X400, or any other text string. If you omit the address space type, an SMTP address space type is assumed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AddressSpace: For SMTP address space types, the address space that you enter must be RFC 1035-compliant. For example, *, *.com, and *.contoso.com are permitted, but *contoso.com isn't permitted. For X.400 address space types, the address space that you enter must be RFC 1685-compliant, such as o=MySite;p=MyOrg;a=adatum;c=us. For all other values of an address type, you can enter any text for the address space.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AddressSpaceCost : The valid input range for the cost is from 1 through 100. A lower cost indicates a better route. If you omit the address space cost, a cost of 1 is assumed. If you enter a non-SMTP address space that contains the semicolon character (;), you must specify the address space cost.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify the address space type or the address space cost, you must enclose the address space in quotation marks ("). For example, the following address space entries are equivalent:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>"SMTP:contoso.com;1"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>"contoso.com;1"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>"SMTP:contoso.com"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>contoso.com</maml:para>
        </command:listItem></command:list>
        <maml:para>You may specify multiple address spaces by separating the address spaces with commas, for example: contoso.com,fabrikam.com. If you specify the address space type or the address space cost, you must enclose the address space in quotation marks ("), for example: "contoso.com;2","fabrikam.com;3".</maml:para>
        <maml:para>To add or remove one or more address space values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the name for the Foreign connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsScopedConnector</maml:name>
      <maml:description>
        <maml:para>The IsScopedConnector parameter specifies the availability of the connector to other Mailbox servers. When the value of this parameter is $false, the connector can be used by all Mailbox servers in the Exchange organization. When the value of this parameter is $true, the connector can be used only by Mailbox servers in the same Active Directory site. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SourceTransportServers</maml:name>
      <maml:description>
        <maml:para>The SourceTransportServers parameter specifies the names of the Mailbox servers that use this Foreign connector. Having a single Foreign connector homed on multiple servers provides fault tolerance and high availability if one of the Mailbox servers fails. The default value of this parameter is the name of the server on which this Foreign connector is first installed.</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a Foreign connector with the following properties:</maml:para>
        <maml:para />
        <maml:para>Connector name: Contoso Foreign Connector</maml:para>
        <maml:para>Address space: "c=US;a=Fabrikam;P=Contoso"</maml:para>
        <maml:para>Address space type: X.400</maml:para>
        <maml:para>Address space cost: 5</maml:para>
        <maml:para>Source transport servers: Hub01 and Hub02</maml:para>
        <maml:para>New-ForeignConnector -Name "Contoso Foreign Connector" -AddressSpaces "X400:c=US;a=Fabrikam;P=Contoso;5" -SourceTransportServers Hub01,Hub02</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>A Foreign connector uses a Drop directory in the Transport service of a Mailbox server to send messages to a local messaging server that doesn't use SMTP as its primary transport mechanism. These messaging servers are known as foreign gateway servers. Third-party fax gateway servers are examples of foreign gateway servers. The address spaces assigned to a Foreign connector can be SMTP or non-SMTP.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Foreign connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/111b71d0-75f2-45b2-a9c9-b4ff51af57b7(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>172e1a14-bd90-4010-abd9-e4878b4213a2
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-ImapSettings</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-IMAPSettings cmdlet to display the properties of a single server running Microsoft Exchange Server 2013 that has the Client Access server role installed and is running the IMAP4 service.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>ImapSettings</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-ImapSettings</maml:name>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies whether the command returns the properties of an individual Client Access server in your organization for which you're viewing IMAP4 settings.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays the parameters and values for the Client Access server CAS01 running the IMAP4 service.</maml:para>
        <maml:para />
        <maml:para>Get-IMAPSettings -Server CAS01</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>With the Get-IMAPSettings cmdlet, you can view the settings for the IMAP4 service running on an Exchange Client Access server. Information can only be returned about servers located in the Exchange organization from which the cmdlet is being run.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "IMAP4 settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/172e1a14-bd90-4010-abd9-e4878b4213a2(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>183b2f07-4225-4ef3-96c8-d29269730d18
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-RemoteDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-RemoteDomain cmdlet to view the configuration information for the remote domains configured in your organization. You can view the remote domain configuration from inside the Exchange organization or from an Edge Transport server in the perimeter network.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>RemoteDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-RemoteDomain</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RemoteDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the remote domain you want to view. Enter either the GUID or name of the remote domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RemoteDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RemoteDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns all remote domains configured in the Active Directory forest in which you run the command.</maml:para>
        <maml:para />
        <maml:para>Get-RemoteDomain</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns the configuration for the remote domain Contoso.</maml:para>
        <maml:para />
        <maml:para>Get-RemoteDomain Contoso</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example queries Active Directory for all remote domains and displays only those remote domains for which Transport Neutral Encapsulation Format (TNEF) encoding isn't used.</maml:para>
        <maml:para />
        <maml:para>Get-RemoteDomain | Where {$_.TNEFEnabled -eq $false}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Remote domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/183b2f07-4225-4ef3-96c8-d29269730d18(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>188bd7f3-a88c-411a-a4ef-16697d7f8c7b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-X400AuthoritativeDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-X400AuthoritativeDomain cmdlet to edit an existing X.400 authoritative domain for your organization. The X.400 authoritative domain defines the standard fields for the namespace appended to the recipient identity for all mailboxes assigned an X.400 address.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>X400AuthoritativeDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-X400AuthoritativeDomain</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">X400AuthoritativeDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>X400DomainName</maml:name>
        <command:parameterValue required="True">X400Domain</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>X400ExternalRelay</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the display name of the X.400 authoritative domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">X400AuthoritativeDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>X400AuthoritativeDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for an X.400 authoritative domain object. When you specify a name that includes spaces, you must enclose the name in quotation marks ("), for example, "Display Name". The Name parameter must contain a maximum of 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>X400DomainName</maml:name>
      <maml:description>
        <maml:para>The X400DomainName parameter specifies the X.400 namespace that can only include the X.400 organizational components. Specifically, only the following attribute types are supported:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Label (Abbreviation)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>C (Country)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>A (ADMD)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>P (PRMD)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>O (Organization)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OU1 (Organization unit 1)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OU2 (Organization unit 2)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OU3 (Organization unit 3)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OU4 (Organization unit 4)</maml:para>
        </command:listItem></command:list>
        <maml:para>The address attributes must be separated by semicolons and the address must be enclosed in quotation marks ("), for example, "C=US;A=att;P=Contoso;O=Sales".</maml:para>
      </maml:description>
      <command:parameterValue required="True">X400Domain</command:parameterValue>
      <dev:type>
        <maml:name>X400Domain</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>X400ExternalRelay</maml:name>
      <maml:description>
        <maml:para>The X400ExternalRelay parameter specifies whether this authoritative domain is an external relay domain. If you set the X400ExternalRelay parameter to $true, Exchange routes e-mail to the external address and doesn't treat resolution failures to this subdomain as errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example makes the following changes to an existing X.400 authoritative domain:</maml:para>
        <maml:para />
        <maml:para>It changes the domain name from Sales to Sales and Marketing.</maml:para>
        <maml:para>It updates the organizational attribute to Sales and Marketing.</maml:para>
        <maml:para>Set-X400AuthoritativeDomain Sales -X400DomainName "C=US;A=att,P=Contoso;O=Sales and Marketing" -Name "Sales and Marketing"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>X.400 domain names can include only the following ASCII characters:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>A to Z</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>a to z</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>0-9</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>These punctuation marks and special characters: (space) ' () + , - . / : = ?</maml:para>
    </command:listItem></command:list>
    <maml:para>You can use the following X.400 attributes (1 each per address):</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>NamecountryAbbreviation C Maximum character length 2</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Nameadministrative domainAbbreviation A Maximum character length 16</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Nameprivate domainAbbreviation P Maximum character length 16</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Nameorganization nameAbbreviation O Maximum character length 64</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Nameorganizational unit nameAbbreviation Ou1-4 Maximum character length 32</maml:para>
    </command:listItem></command:list>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "X.400 domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/188bd7f3-a88c-411a-a4ef-16697d7f8c7b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>1cc5a98c-d828-4122-84b3-2c4eefb3d475
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-EdgeSyncServiceConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-EdgeSyncServiceConfig cmdlet to modify the configuration of edge synchronization service settings that control the general synchronization behavior shared by all EdgeSync services.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>EdgeSyncServiceConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-EdgeSyncServiceConfig</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">EdgeSyncServiceConfigIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConfigurationSyncInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CookieValidDuration</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FailoverDCInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LockDuration</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LockRenewalDuration</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogLevel</maml:name>
        <command:parameterValue required="True">None | Low | Medium | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogPath</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OptionDuration</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientSyncInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the Microsoft Exchange EdgeSync service you want to configure.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EdgeSyncServiceConfigIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>EdgeSyncServiceConfigIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConfigurationSyncInterval</maml:name>
      <maml:description>
        <maml:para>The ConfigurationSyncInterval parameter specifies how frequently the Microsoft Exchange EdgeSync service synchronizes configuration data. The default value is 3 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CookieValidDuration</maml:name>
      <maml:description>
        <maml:para>The CookieValidDuration parameter specifies how long a cookie record is valid. The default value is 21 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FailoverDCInterval</maml:name>
      <maml:description>
        <maml:para>The FailoverDCInterval parameter specifies how long EdgeSync waits before failing over to another domain controller if it can't read configuration data from Active Directory. The default value is 5 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LockDuration</maml:name>
      <maml:description>
        <maml:para>The LockDuration parameter specifies how long an instance of the Microsoft Exchange EdgeSync service can maintain an exclusive lock on the synchronization rights. While an EdgeSync service maintains an exclusive lock on synchronization rights, no other EdgeSync service can take over synchronization. The default value is 6 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LockRenewalDuration</maml:name>
      <maml:description>
        <maml:para>The LockRenewalDuration parameter specifies how long before the expiry of an exclusive lock an EdgeSync service can renew the lock. The default value is 4 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogEnabled</maml:name>
      <maml:description>
        <maml:para>The LogEnabled parameter specifies enables or disables the EdgeSyncLog. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogLevel</maml:name>
      <maml:description>
        <maml:para>The LogLevel parameter specifies the EdgeSync logging level. Valid values for this parameter are None, Low, Medium and High. The default value is None.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Low | Medium | High</command:parameterValue>
      <dev:type>
        <maml:name>None | Low | Medium | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogMaxAge</maml:name>
      <maml:description>
        <maml:para>The LogMaxAge parameter specifies the maximum duration in days to keep the EdgeSyncLog files. Log files older than the specified value can be overwritten. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The LogMaxDirectorySize specifies the maximum amount of disk space the EdgeSyncLog directory can use. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the LogMaxFileSize parameter must be less than or equal to the value of the LogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the EdgeSyncLog directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The LogMaxFileSize parameter specifies the maximum log file size for the EdgeSyncLog files. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the LogMaxFileSize parameter must be less than or equal to the value of the LogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the EdgeSyncLog files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogPath</maml:name>
      <maml:description>
        <maml:para>The LogPath parameter specifies the disk location to store the EdgeSyncLog files. The default value is TransportRoles\Logs\EdgeSync\.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the EdgeSync service configuration.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OptionDuration</maml:name>
      <maml:description>
        <maml:para>The OptionDuration parameter specifies how long an instance of the Microsoft Exchange EdgeSync service can maintain an optional lock on the synchronization rights. While an EdgeSync service maintains an optional lock on synchronization rights, another EdgeSync service can take over synchronization after the optional lock has expired if it's initiated using the Start-EdgeSynchronization command. The default value is 30 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientSyncInterval</maml:name>
      <maml:description>
        <maml:para>The RecipientSyncInterval parameter specifies how frequently the Microsoft Exchange EdgeSync service synchronizes recipient data from the global catalog. The default value is 5 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example configures the Microsoft Exchange EdgeSync service settings named Primary EdgeSync Settings with the following values:</maml:para>
        <maml:para />
        <maml:para>EdgeSync logging is enabled and set to the medium detail level.</maml:para>
        <maml:para>The log files are stored in the EdgeSyncLog share on the server named Server01.</maml:para>
        <maml:para>The maximum individual log file size is 5 megabytes (MB).</maml:para>
        <maml:para>The log files are kept for 3 days.</maml:para>
        <maml:para>Set-EdgeSyncServiceConfig "Primary EdgeSync Settings" -LogEnabled $true -LogLevel Medium -LogPath "\\Server01\EdgeSyncLog" -LogMaxFileSize 5MB -LogMaxAge 3</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "EdgeSync" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/1cc5a98c-d828-4122-84b3-2c4eefb3d475(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>1d007408-e00d-48da-89aa-5994f490fbae
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-ThrottlingPolicyAssociation</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-ThrottlingPolicyAssociation cmdlet to associate a throttling policy with a specific object. The object can be a user with a mailbox, a user without a mailbox, a contact, or a computer account.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>ThrottlingPolicyAssociation</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-ThrottlingPolicyAssociation</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ThrottlingPolicyAssociationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDefaultScope</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ThrottlingPolicy</maml:name>
        <command:parameterValue required="True">ThrottlingPolicyIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the object to which you want to associate a throttling policy. The object can be a user with a mailbox, a user without a mailbox, a contact, or a computer account.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ThrottlingPolicyAssociationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ThrottlingPolicyAssociationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDefaultScope</maml:name>
      <maml:description>
        <maml:para>The IgnoreDefaultScope parameter instructs the command to ignore the default recipient scope setting for the Exchange Management Shell session and use the entire forest as the scope. This allows the command to access Active Directory objects that aren't currently in the default scope. Using the IgnoreDefaultScope parameter introduces the following restrictions:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>If you use the Identity parameter, you must use enter the value in the distinguished name (DN) format.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ThrottlingPolicy</maml:name>
      <maml:description>
        <maml:para>The ThrottlingPolicy parameter specifies the throttling policy that you want to be associated with the object specified by the Identity parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ThrottlingPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ThrottlingPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example associates a user with a user name of tonysmith to the throttling policy ITStaffPolicy that has higher limits.</maml:para>
        <maml:para />
        <maml:para>Set-ThrottlingPolicyAssociation -Identity tonysmith -ThrottlingPolicy ITStaffPolicy</maml:para>
        <maml:para>You don't need to use the Set-ThrottlingPolicyAssociation cmdlet to associate a user with a policy. The following commands show another way to associate tonysmith to the throttling policy ITStaffPolicy.</maml:para>
        <maml:para />
        <maml:para>$b = Get-ThrottlingPolicy ITStaffPolicy</maml:para>
        <maml:para>Set-Mailbox -Identity tonysmith -ThrottlingPolicy $b</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Set-ThrottlingPolicyAssociation cmdlet defines quota limits for specific objects. For example, if you notice that a user or other object is using excessive bandwidth, you can associate that object with a throttling policy that's more restrictive.</maml:para>
    <maml:para>In data center deployments, the object referred to by the Identity and ThrottlingPolicy parameters must be in the same tenant.</maml:para>
    <maml:para>For more information about how to control the resources consumed by individual users, see Exchange workload management.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "User throttling" entry in the Server health and performance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/1d007408-e00d-48da-89aa-5994f490fbae(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>1e4fe132-1d80-4053-8db2-8dd6a3710fcf
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-ClassificationRuleCollection</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the New-ClassificationRuleCollection cmdlet to import new classification rule collections into your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>ClassificationRuleCollection</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-ClassificationRuleCollection</maml:name>
      <command:parameter required="True">
        <maml:name>FileData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OutOfBoxCollection</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>New-ClassificationRuleCollection</maml:name>
      <command:parameter required="True">
        <maml:name>InstallDefaultCollection</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="True" position="1">
      <maml:name>FileData</maml:name>
      <maml:description>
        <maml:para>The FileData parameter specifies the classification rule collection file you want to import.</maml:para>
        <maml:para>For more information about the syntax required to use this parameter, see Syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InstallDefaultCollection</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OutOfBoxCollection</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example imports the classification rule collection file C:\My Documents\External Classification Rule Collection.xml.</maml:para>
        <maml:para />
        <maml:para>New-ClassificationRuleCollection -FileData ([Byte[]]$(Get-Content -Path "C:\My Documents\External Classification Rule Collection.xml" -Encoding Byte -ReadCount 0))</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/1e4fe132-1d80-4053-8db2-8dd6a3710fcf(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>241011bb-e9d7-43ae-9e79-e47206a35010
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-AutodiscoverVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-AutodiscoverVirtualDirectory cmdlet to retrieve the settings for the Autodiscover virtual directory on a computer running Microsoft Exchange Server 2013.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>AutodiscoverVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-AutodiscoverVirtualDirectory</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADPropertiesOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowBackEndVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowMailboxVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-AutodiscoverVirtualDirectory</maml:name>
      <command:parameter required="True">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADPropertiesOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowBackEndVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowMailboxVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the name or GUID of the Client Access server that hosts the virtual directories that you want to display.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ADPropertiesOnly</maml:name>
      <maml:description>
        <maml:para>The ADPropertiesOnly switch specifies whether to return only the properties about the virtual directory stored in Active Directory. The properties stored in the Internet Information Services (IIS) metabase aren't returned.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the virtual directory and website for the Autodiscover virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>VirtualDirectoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShowBackendVirtualDirectories</maml:name>
      <maml:description>
        <maml:para>The ShowBackendVirtualDirectories switch specifies whether to list the virtual directories located on the Mailbox servers within the organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShowMailboxVirtualDirectories</maml:name>
      <maml:description>
        <maml:para>The ShowMailboxVirtualDirectories switch specifies whether to list the virtual directories located on the Mailbox servers within the organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns settings for the Autodiscover virtual directory under the default website in IIS on the Client Access server CAS01 for the autodiscover.contoso.com site.</maml:para>
        <maml:para />
        <maml:para>Get-AutodiscoverVirtualDirectory -Server CAS01 -Identity "CAS01\autodiscover(autodiscover.contoso.com)"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns settings for the Autodiscover virtual directory located on the Client Access server CAS01 by querying Active Directory using the domain controller specified.</maml:para>
        <maml:para />
        <maml:para>Get-AutodiscoverVirtualDirectory -DomainController Exch1 -Server CAS01</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can run the Get-AutodiscoverVirtualDirectory cmdlet on a local server or run it remotely if the server name is specified in the Identity or Server parameters. You can also run this cmdlet without parameters to retrieve the configuration settings from all Autodiscover virtual directories on all Internet Information Services (IIS) websites located on the Client Access servers in the organization.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Autodiscover virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/241011bb-e9d7-43ae-9e79-e47206a35010(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>25da87cf-f0bc-4de5-b03a-51bb77263c18
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-Subscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>The New-Subscription cmdlet allows a user to create Hotmail, POP, or IMAP subscriptions in their own cloud-based mailbox. An administrator can't use this cmdlet to create subscriptions in another user's mailbox.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>Subscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-Subscription</maml:name>
      <command:parameter required="True">
        <maml:name>EmailAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Password</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Hotmail</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Imap</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Pop</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EmailAddress</maml:name>
      <maml:description>
        <maml:para>The EmailAddress parameter specifies the email address of the IMAP mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the name of the subscription. The name of the subscription doesn't have to be globally unique. The name must be unique compared to other subscriptions that exist in the same mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Password</maml:name>
      <maml:description>
        <maml:para>The Password parameter specifies the password used to sign in to the mailbox. You must specify the value for this parameter in a secure format, for example, (ConvertTo-SecureString -String '&lt;password&gt;' -AsPlainText -Force).</maml:para>
      </maml:description>
      <command:parameterValue required="True">SecureString</command:parameterValue>
      <dev:type>
        <maml:name>SecureString</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplayName</maml:name>
      <maml:description>
        <maml:para>The DisplayName parameter specifies the friendly name of the subscription. If you don't specify a value for the DisplayName parameter, the value of the EmailAddress parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force parameter instructs the command to create the subscription even if those settings can't be verified by the remote server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Hotmail</maml:name>
      <maml:description>
        <maml:para>The Hotmail parameter tries to configure the subscription settings for a Hotmail mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Imap</maml:name>
      <maml:description>
        <maml:para>The Imap parameter tries to configure the subscription settings for an IMAP mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that contains the subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Pop</maml:name>
      <maml:description>
        <maml:para>The Pop parameter tries to configure the subscription settings for a POP mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the subscription Contoso in the mailbox of the user Brian Johnson. The remote mailbox has the following details:</maml:para>
        <maml:para />
        <maml:para>Email address: brian@contoso.com</maml:para>
        <maml:para>Password: Pa$$word1</maml:para>
        <maml:para>New-Subscription -Name Contoso -EmailAddress brian@contoso.com -Password (ConvertTo-SecureString -String 'Pa$$word1' -AsPlainText -Force)</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The New-Subscription cmdlet creates a connection between a user's cloud-based mailbox and a remote Hotmail, POP, or IMAP mailbox. The cloud-based mailbox periodically polls the remote mailbox for new messages. If you don't specify the type of remote mailbox, the cmdlet automatically tries to configure the subscription by using all of the available subscription types.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/25da87cf-f0bc-4de5-b03a-51bb77263c18(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>26aa9772-aa31-4765-b2a4-d0dd78d77fc8
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Test-OAuthConnectivity</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Test-OAuthConnectivity cmdlet to test OAuth authentication to partner applications for a user.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Test</command:verb>
    <command:noun>OAuthConnectivity</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Test-OAuthConnectivity</maml:name>
      <command:parameter required="True">
        <maml:name>Service</maml:name>
        <command:parameterValue required="True">EWS | AutoD | Generic</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>TargetUri</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AppOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrganizationDomain</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReloadConfig</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UseCachedToken</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Service</maml:name>
      <maml:description>
        <maml:para>The Service parameter specifies the partner application. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>EWS</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AutoD</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Generic</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">EWS | AutoD | Generic</command:parameterValue>
      <dev:type>
        <maml:name>EWS | AutoD | Generic</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetUri</maml:name>
      <maml:description>
        <maml:para>The TargetUri parameter specifies the URL for the service you want to test OAuth connectivity with.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AppOnly</maml:name>
      <maml:description>
        <maml:para>The AppOnly switch specifies the cmdlet will authenticate to the specified service as Exchange without any user context. You don't need to specify a value with this switch.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the mailbox for which you want to test OAuth connectivity to the specified partner application.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OrganizationDomain</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The OrganizationDomain parameter specifies the domain name of the Office 365 organization. For example, contoso.com.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReloadConfig</maml:name>
      <maml:description>
        <maml:para>The ReloadConfig switch reloads all the configuration settings from the Exchange configuration objects. You don't need to specify a value with this switch. If you don't use this switch, the cached configuration settings are used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UseCachedToken</maml:name>
      <maml:description>
        <maml:para>The UseCachedToken switch specifies that OAuth will try to use an existing, cached authorization token. You don't need to specify a value with this switch.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example tests OAuth connectivity with Exchange for Gurinder Singh.</maml:para>
        <maml:para />
        <maml:para>Test-OAuthConnectivity -Service EWS -TargetUri https://cas.contoso.com/ews/ -Mailbox "Gurinder Singh"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Exchange 2013 creates the SharePoint 2013 and Lync 2013 partner applications in on-premises Exchange 2013 deployments. For Test-OAuthConnectivity cmdlet to succeed for other partner applications, you must have created the partner application first using the Configure-EnterpriseApplication.ps1 script.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Partner applications - configure" entry in the Sharing and collaboration permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/26aa9772-aa31-4765-b2a4-d0dd78d77fc8(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>273690c8-4e0d-4f05-8786-11d71868dae0
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Test-ImapConnectivity</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Test-ImapConnectivity cmdlet to verify that the IMAP4 service is running as expected. The Test-ImapConnectivity cmdlet can be used to test the IMAP4 functionality for a specified Client Access server for all mailboxes on servers running Microsoft Exchange Server 2013 in the same Active Directory site.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Test</command:verb>
    <command:noun>ImapConnectivity</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Test-ImapConnectivity</maml:name>
      <command:parameter required="False">
        <maml:name>ClientAccessServer</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionType</maml:name>
        <command:parameterValue required="True">Plaintext | Tls | Ssl</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PerConnectionTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PortClientAccessServer</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TrustAnySSLCertificate</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LightMode</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxServer</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MonitoringContext</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResetTestAccountCredentials</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Timeout</maml:name>
        <command:parameterValue required="True">UInt32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UserType</maml:name>
        <command:parameterValue required="True">LEGACY | EDU | BPOS</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>ClientAccessServer</maml:name>
      <maml:description>
        <maml:para>The ClientAccessServer parameter specifies the name of the Client Access server to test.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectionType</maml:name>
      <maml:description>
        <maml:para>The ConnectionType parameter specifies the type of connection used to connect to the Client Access server. This setting can be set to Plaintext, Tls, or Ssl.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Plaintext | Tls | Ssl</command:parameterValue>
      <dev:type>
        <maml:name>Plaintext | Tls | Ssl</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LightMode</maml:name>
      <maml:description>
        <maml:para>The LightMode parameter instructs the command to perform only a test logon to the server using the IMAP4 protocol. If you don't use this parameter, the test also tests the sending and receiving of a message using the IMAP4 protocol.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxCredential</maml:name>
      <maml:description>
        <maml:para>The MailboxCredential parameter specifies the mailbox credential for a single mailbox test.</maml:para>
      </maml:description>
      <command:parameterValue required="True">PSCredential</command:parameterValue>
      <dev:type>
        <maml:name>PSCredential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxServer</maml:name>
      <maml:description>
        <maml:para>The MailboxServer parameter specifies the name of the Mailbox server to test. If not specified, all Mailbox servers in the local Active Directory site are tested.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MonitoringContext</maml:name>
      <maml:description>
        <maml:para>The MonitoringContext switch includes the associated monitoring events and performance counters in the results. You don't need to specify a value with this switch. Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager 2007 or System Center 2012 - Operations Manager.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PerConnectionTimeout</maml:name>
      <maml:description>
        <maml:para>The PerConnectionTimeout parameter specifies the amount of time, in seconds, to wait per connection for the test operation to finish. The default value for the PerConnectionTimeout parameter is 120 seconds. You must specify a time-out value greater than 0 seconds and less than 120 seconds. We recommend that you configure this parameter with a value of 5 seconds or more.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PortClientAccessServer</maml:name>
      <maml:description>
        <maml:para>The PortClientAccessServer parameter specifies the port to use to connect to the Client Access server. The default port is 143 for IMAP4. The valid range is from 0 through 65,535.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResetTestAccountCredentials</maml:name>
      <maml:description>
        <maml:para>The ResetTestAccountCredentials switch resets the password for the test account that's used to run this command. The password for the test account is typically reset every seven days. Use this switch to force a password reset any time it's required for security reasons.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Timeout</maml:name>
      <maml:description>
        <maml:para>The Timeout parameter specifies the amount of time, in seconds, to wait for the test operation to finish. The default value for the Timeout parameter is 180 seconds. You must specify a time-out value greater than 0 seconds and less than 1 hour (3,600 seconds). We recommend that you configure this parameter with a value of 5 seconds or more.</maml:para>
      </maml:description>
      <command:parameterValue required="True">UInt32</command:parameterValue>
      <dev:type>
        <maml:name>UInt32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TrustAnySSLCertificate</maml:name>
      <maml:description>
        <maml:para>The TrustAnySSLCertificate parameter specifies whether Secure Sockets Layer (SSL) certificate validation failures are reported. This parameter instructs the command to check the IMAP4 service without generating an error when the certificate doesn't match the URL of the Client Access server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UserType</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LEGACY | EDU | BPOS</command:parameterValue>
      <dev:type>
        <maml:name>LEGACY | EDU | BPOS</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example tests the IMAP4 connectivity for the Client Access server Contoso12 by using the credentials for the user contoso\kweku.</maml:para>
        <maml:para />
        <maml:para>Test-ImapConnectivity -ClientAccessServer:Contoso12 -MailboxCredential:(Get-Credential contoso\kweku)</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example tests the IMAP4 connectivity of the specific Client Access server Contoso12 and tests all Exchange mailboxes.</maml:para>
        <maml:para />
        <maml:para>Test-ImapConnectivity -ClientAccessServer:Contoso12</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Test IMAP4 settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/273690c8-4e0d-4f05-8786-11d71868dae0(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>2a354fe4-34ed-4f8a-bc21-e092b27e133d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Import-ContactList</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Import-ContactList cmdlet and a .csv file to import a user's mail contacts to a cloud-based mailbox. Users can use an email client to export their contacts to a .csv file that is formatted for Microsoft Office Outlook.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Import</command:verb>
    <command:noun>ContactList</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Import-ContactList</maml:name>
      <command:parameter required="True">
        <maml:name>CSV</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>CSVData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Import-ContactList</maml:name>
      <command:parameter required="True">
        <maml:name>CSV</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>CSVStream</maml:name>
        <command:parameterValue required="True">Stream</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CSV</maml:name>
      <maml:description>
        <maml:para>The CSV parameter simply specifies that the contacts will be imported from a .csv file.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CSVData</maml:name>
      <maml:description>
        <maml:para>The CSVData parameter specifies the .csv file you want to import. Use the following syntax for this parameter: ([System.IO.File]::ReadAllBytes("&lt;file name and path&gt;")). For example, ([System.IO.File]::ReadAllBytes("C:\My Documents\Contacts.csv")).</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CSVStream</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Stream</command:parameterValue>
      <dev:type>
        <maml:name>Stream</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the target mailbox to which the contacts are imported. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example imports a list of contacts in a .csv file named TerryAdams.csv to a mailbox for a user whose email address is terrya@contoso.edu.</maml:para>
        <maml:para />
        <maml:para>Import-ContactList -CSV -CSVData ([System.IO.File]::ReadAllBytes("D:\Users\Administrator\Desktop\TerryAdams.csv")) -Identity terrya@contoso.edu</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Import-ContactList cmdlet submits a request to import a list of mail contacts that are contained in a .csv file to a cloud-based mailbox. Many MAPI and Web-based email clients allow users to export contacts to a Microsoft Office Outlook .csv format. Users can then provide that .csv file to you to import contacts to their cloud-based mailbox. During the import process, Microsoft Exchange matches the column names in the header row of the .csv file to the property names of an Exchange contact.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Recipient provisioning permissions" section in the Recipients Permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/2a354fe4-34ed-4f8a-bc21-e092b27e133d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>2bc71c83-4d16-4c16-9ce6-751f4e60b991
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-MessageClassification</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-MessageClassification cmdlet to view existing message classifications in your organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>MessageClassification</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-MessageClassification</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MessageClassificationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeLocales</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the message classification instance that you want to view. When you specify a name that includes spaces, you must enclose the name in quotation marks ("), for example, "Administrative Name".</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageClassificationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MessageClassificationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeLocales</maml:name>
      <maml:description>
        <maml:para>The IncludeLocales switch specifies whether the command output includes the message classification locale data. When you use the IncludeLocales switch, the output includes the message classification locale data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all message classifications in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-MessageClassification</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Message classifications" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/2bc71c83-4d16-4c16-9ce6-751f4e60b991(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>2d6bc8d2-aa4c-497a-beaf-ec99b10a6a96
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Test-EdgeSynchronization</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Test-EdgeSynchronization cmdlet to diagnose whether the subscribed Edge Transport servers have a current and accurate synchronization status.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Test</command:verb>
    <command:noun>EdgeSynchronization</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Test-EdgeSynchronization</maml:name>
      <command:parameter required="False">
        <maml:name>ExcludeRecipientTest</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FullCompareMode</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxReportSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MonitoringContext</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TargetServer</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Test-EdgeSynchronization</maml:name>
      <command:parameter required="True">
        <maml:name>VerifyRecipient</maml:name>
        <command:parameterValue required="True">ProxyAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>VerifyRecipient</maml:name>
      <maml:description>
        <maml:para>The VerifyRecipient parameter specifies a single recipient with which to verify the synchronization status. You identify the recipient by specifying a proxy address assigned to the recipient. The proxy address is the recipient's email address. The recipient verification test is mutually exclusive of the test that verifies synchronization of configuration data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ProxyAddress</command:parameterValue>
      <dev:type>
        <maml:name>ProxyAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExcludeRecipientTest</maml:name>
      <maml:description>
        <maml:para>The ExcludeRecipientTest switch specifies whether to exclude validation of recipient data synchronization. If you include this switch, only the synchronization of configuration objects is validated. Validating that recipient data is synchronized takes longer than validating only configuration data. You don't have to include a value with this switch.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FullCompareMode</maml:name>
      <maml:description>
        <maml:para>The FullCompareMode switch specifies whether a full comparison of the configuration data between Active Directory and AD LDS instance on the target Edge Transport server is performed. If you don't use this switch, a full comparison of replicated configuration data is skipped and the command only tests the Edge synchronization by verifying the replication cookie.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxReportSize</maml:name>
      <maml:description>
        <maml:para>The MaxReportSize parameter specifies the total number of objects and properties listed in the results. The results output by this command include a list of all out-of-sync objects and properties in both AD LDS and Active Directory. If the directory services aren't synchronized, a large amount of data can result. If you don't specify a value for this parameter, the default value of 1,000 is used. The minimum value for this parameter is 1. The maximum value for this parameter is unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MonitoringContext</maml:name>
      <maml:description>
        <maml:para>The MonitoringContext parameter includes or excludes the associated monitoring events and performance counters in the results. Valid input for this parameter is $true or $false. The default value is $false. If you specify the value $true, the monitoring events and performance counters are included in the command results. Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager 2007 or System Center 2012 - Operations Manager.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetServer</maml:name>
      <maml:description>
        <maml:para>The TargetServer parameter specifies an Edge Transport server to initiate edge synchronization with. If omitted, all Edge Transport servers are synchronized.</maml:para>
        <maml:para>You may want to use this parameter to specify a single Edge Transport server for synchronization if a new Edge Transport server has been installed or if that Edge Transport server has been unavailable for some time.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example diagnoses the synchronization status of subscribed Edge Transport servers, outputs only the first 500 data inconsistencies, and generates events and performance counters for use by System Center Operations Manager 2007.</maml:para>
        <maml:para />
        <maml:para>Test-EdgeSynchronization -MaxReportSize 500 -MonitoringContext $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example verifies the synchronization status of the single recipient kate@contoso.com.</maml:para>
        <maml:para />
        <maml:para>Test-EdgeSynchronization -VerifyRecipient kate@contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Test-EdgeSynchronization cmdlet is a diagnostic cmdlet that provides a report of the synchronization status of subscribed Edge Transport servers. You can use the VerifyRecipient parameter with this cmdlet to verify that a single recipient has been synchronized to the Active Directory Lightweight Directory Services (AD LDS) instance. The Edge Subscription process establishes one-way replication of recipient and configuration information from Active Directory to AD LDS.</maml:para>
    <maml:para>This cmdlet compares the data stored in Active Directory and the data stored in AD LDS. Any inconsistencies in data are reported in the results output by this cmdlet.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "EdgeSync" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/2d6bc8d2-aa4c-497a-beaf-ec99b10a6a96(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>2d7f36c8-38db-4318-879c-8f77cfd09b06
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-ImapSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-ImapSubscription cmdlet to modify the properties of an existing IMAP subscription configured in a user's cloud-based mailbox.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>ImapSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-ImapSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-ImapSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EmailAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnablePoisonSubscription</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingAuth</maml:name>
        <command:parameterValue required="True">Basic | Ntlm</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingPassword</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingPort</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingSecurity</maml:name>
        <command:parameterValue required="True">None | Ssl | Tls</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingServer</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingUserName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-ImapSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ValidateSecret</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-ImapSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResendVerification</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-ImapSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisableAsPoison</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the IMAP subscription. You can identify the subscription by using one of the following methods:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Specify the globally unique identifier of the subscription, which is its canonical name (CN).</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Use the Mailbox parameter to specify the mailbox that contains the subscription, and then specify the name of the subscription.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can find the identifying values for an IMAP subscription, such as Identity and Name, by running this command: Get-ImapSubscription -Mailbox &lt;mailbox&gt;.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisableAsPoison</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplayName</maml:name>
      <maml:description>
        <maml:para>The DisplayName parameter specifies the friendly name of the subscription.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EmailAddress</maml:name>
      <maml:description>
        <maml:para>The EmailAddress parameter specifies the email address of the IMAP mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether the IMAP subscription is enabled. This parameter accepts $true or $false values. The default is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnablePoisonSubscription</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force parameter instructs the command to modify the specified subscription settings even if those settings can't be verified by the remote IMAP server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingAuth</maml:name>
      <maml:description>
        <maml:para>The IncomingAuth parameter sets the authentication method used by IMAP clients to access the IMAP server. The values are Basic or Ntlm. The default value is Basic.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Basic | Ntlm</command:parameterValue>
      <dev:type>
        <maml:name>Basic | Ntlm</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingPassword</maml:name>
      <maml:description>
        <maml:para>The IncomingPassword parameter specifies the password used to sign in to the IMAP mailbox. You must specify the value for this parameter in a secure format, for example, (ConvertTo-SecureString -String '&lt;password&gt;' -AsPlainText -Force).</maml:para>
      </maml:description>
      <command:parameterValue required="True">SecureString</command:parameterValue>
      <dev:type>
        <maml:name>SecureString</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingPort</maml:name>
      <maml:description>
        <maml:para>The IncomingPort parameter specifies the TCP port number used by IMAP clients to connect to the IMAP server. Typical values are 143 for unencrypted connections and 993 for encrypted connections. By default, the value of the IncomingPort parameter is set to 143 if you don't set the IncomingSecurity parameter to Ssl or Tls. If you set the IncomingSecurity parameter to Ssl or Tls, the value of the IncomingPort parameter is set to 993. You can override the default values by specifying an integer for the IncomingPort parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingSecurity</maml:name>
      <maml:description>
        <maml:para>The IncomingSecurity parameter specifies the encryption method used by IMAP clients to connect to the IMAP server. The values are None, Ssl, or Tls. The default value is None.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Ssl | Tls</command:parameterValue>
      <dev:type>
        <maml:name>None | Ssl | Tls</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingServer</maml:name>
      <maml:description>
        <maml:para>The IncomingServer parameter specifies the fully qualified domain name (FQDN) of the IMAP server, for example, incoming.contoso.com.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingUserName</maml:name>
      <maml:description>
        <maml:para>The IncomingUserName parameter specifies the user name used to sign in to the IMAP mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that contains the IMAP subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResendVerification</maml:name>
      <maml:description>
        <maml:para>The ResendVerification parameter generates verification data for the IMAP subscription. This test is part of the verification process that allows the user to send messages from their cloud-based mailbox using the From address of the subscribed IMAP mailbox.</maml:para>
        <maml:para>The ResendVerification parameter can't be specified with any other parameters that modify the settings of the subscription. Also, the ResendVerification and ValidateSecret parameters are mutually exclusive.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ValidateSecret</maml:name>
      <maml:description>
        <maml:para>The ValidateSecret parameter validates verification data for the IMAP subscription. This test is part of the verification process that allows the user to send messages from their cloud-based mailbox using the From address of the subscribed IMAP mailbox.</maml:para>
        <maml:para>The ValidateSecret parameter can't be specified with any other parameters that modify the settings of the subscription. Also, the ResendVerification and ValidateSecret parameters are mutually exclusive.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the display name of the IMAP subscription Fabrikam IMAP that's configured in the cloud-based mailbox of the user Kim Akers.</maml:para>
        <maml:para />
        <maml:para>Set-ImapSubscription "Fabrikam IMAP" -Mailbox "Kim Akers" -DisplayName "Kim's Fabrikam Mail"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example changes the IMAP server value to imap.contoso.com for the IMAP subscription Brian Contoso Mail that's configured in the cloud-based mailbox of the user Brian Johnson".</maml:para>
        <maml:para />
        <maml:para>Set-ImapSubscription "Brian Contoso Mail" -Mailbox "Brian Johnson" -IncomingServer imap.contoso.com -Force</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can set properties for the IMAP subscription, such as the IMAP server, TCP port number, encryption method, and authentication method.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/2d7f36c8-38db-4318-879c-8f77cfd09b06(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>2ef9a20b-0974-45d0-9dae-23bab22d736e
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-AcceptedDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-AcceptedDomain cmdlet to configure an existing accepted domain in your organization. An accepted domain is any SMTP namespace for which an Exchange organization sends and receives email.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>AcceptedDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-AcceptedDomain</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AddressBookEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AuthenticationType</maml:name>
        <command:parameterValue required="True">Managed | Federated</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CatchAllRecipient</maml:name>
        <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainType</maml:name>
        <command:parameterValue required="True">Authoritative | ExternalRelay | InternalRelay</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DualProvisioningEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableNego2Authentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InitialDomain</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsCoexistenceDomain</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveIdInstanceType</maml:name>
        <command:parameterValue required="True">Consumer | Business</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailFlowPartner</maml:name>
        <command:parameterValue required="True">MailFlowPartnerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MakeDefault</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MatchSubDomains</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OutboundOnly</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PendingCompletion</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PendingRemoval</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the accepted domain you want to modify. You can use any value that uniquely identifies the accepted domain object. For example, you can use the name, GUID or distinguished name (DN) of the accepted domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AcceptedDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddressBookEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The AddressBookEnabled parameter specifies whether to enable recipient filtering on the server that accepts mail for this accepted domain. The default values for this parameter are as follows:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>For authoritative domains $true</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>For internal relay domains $false</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>For external relay domains $false</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AuthenticationType</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Managed | Federated</command:parameterValue>
      <dev:type>
        <maml:name>Managed | Federated</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CatchAllRecipient</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainType</maml:name>
      <maml:description>
        <maml:para>The DomainType parameter specifies the type of accepted domain that you want to configure. Valid values are Authoritative, InternalRelay, and ExternalRelay. You must set at least one value.</maml:para>
        <maml:para>In an authoritative domain, messages are delivered to a recipient that has a domain account in your Exchange organization. In an internal relay domain, messages are relayed to a server outside your Exchange organization, but still under the authority of your company or IT department. Use the internal relay domain if you want to treat messages to this domain as internal messages. In an external relay domain, messages are relayed to an email server outside your organization, which you don't control.</maml:para>
        <maml:para>The default value is Authoritative.</maml:para>
        <maml:para>ExternalRelay is only available in on-premises Exchange 2013.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Authoritative | ExternalRelay | InternalRelay</command:parameterValue>
      <dev:type>
        <maml:name>Authoritative | ExternalRelay | InternalRelay</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DualProvisioningEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableNego2Authentication</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InitialDomain</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsCoexistenceDomain</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LiveIdInstanceType</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Consumer | Business</command:parameterValue>
      <dev:type>
        <maml:name>Consumer | Business</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailFlowPartner</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailFlowPartnerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailFlowPartnerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MakeDefault</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MakeDefault parameter specifies whether the accepted domain is the default domain. The default accepted domain is the domain name associated with outbound messages that have encapsulated addresses, such as IMCEANOTES-user+40OtherSystem@contoso.com, for non-Exchange email system interoperability. If you don't interoperate with a non-Exchange email system in your organization, you don't have to set this parameter. For the first accepted domain created in the organization, the default value is $true. For subsequent accepted domains, the default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MatchSubDomains</maml:name>
      <maml:description>
        <maml:para>The MatchSubDomains parameter enables mail to be sent by and received from users on any subdomain of this accepted domain. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The Name parameter specifies a unique name for the accepted domain object.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OutboundOnly</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The OutboundOnly parameter specifies whether this accepted domain is an internal relay domain for the on-premises deployment for organizations that have coexistence with a cloud-based organization.</maml:para>
        <maml:para>The authoritative accepted domain for the on-premises deployment is configured as an internal relay accepted domain on the cloud side. If the on-premises deployment is using Microsoft Forefront Online Protection for Exchange, you must set this parameter to $true for the accepted domain that represents your on-premises deployment. This parameter is used only if the DomainType parameter is set to Authoritative or InternalRelay. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PendingCompletion</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PendingRemoval</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example makes the accepted domain Contoso the default accepted domain.</maml:para>
        <maml:para />
        <maml:para>Set-AcceptedDomain -Identity Contoso -MakeDefault $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Accepted domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/2ef9a20b-0974-45d0-9dae-23bab22d736e(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>30344629-5705-4827-b3d1-d56b036d0eac
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Enable-OutlookProtectionRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Enable-OutlookProtectionRule cmdlet to enable an existing Outlook protection rule.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Enable</command:verb>
    <command:noun>OutlookProtectionRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Enable-OutlookProtectionRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the rule being enabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables the Outlook protection rule Project Contoso.</maml:para>
        <maml:para />
        <maml:para>Enable-OutlookProtectionRule -Identity "Project Contoso"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Outlook protection rules are used to automatically Information Rights Management (IRM)-protect messages using a Rights Management Services (RMS) template before the message is sent. However, Outlook protection rules don't inspect message content. To rights-protect messages based on message content, use transport protection rules. For more information, see Outlook protection rules.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Information Rights Management (IRM) configuration" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/30344629-5705-4827-b3d1-d56b036d0eac(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>307a1dd0-3a4c-4431-bd9f-35aa5cb57aad
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-PopSettings</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-PopSettings cmdlet to set specific POP3 settings for the server running Microsoft Exchange Server 2013 that has the Client Access server role installed and that's running the Microsoft Exchange POP3 service.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>PopSettings</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-PopSettings</maml:name>
      <command:parameter required="False">
        <maml:name>AuthenticatedConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Banner</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CalendarItemRetrievalOption</maml:name>
        <command:parameterValue required="True">iCalendar | intranetUrl | InternetUrl | Custom</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableExactRFC822Size</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableGSSAPIAndNTLMAuth</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnforceCertificateErrors</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionPolicy</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalConnectionSettings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalConnectionSettings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveIdBasicAuthReplacement</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogFileLocation</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogFileRollOverSettings</maml:name>
        <command:parameterValue required="True">Hourly | Daily | Weekly | Monthly</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LoginType</maml:name>
        <command:parameterValue required="True">PlainTextLogin | PlainTextAuthentication | SecureLogin</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogPerFileSizeQuota</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxCommandSize</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConnectionFromSingleIP</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConnections</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConnectionsPerUser</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRetrievalMimeFormat</maml:name>
        <command:parameterValue required="True">TextOnly | HtmlOnly | HtmlAndTextAlternative | TextEnrichedOnly | TextEnrichedAndTextAlternative | BestBodyFormat | Tnef</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRetrievalSortOrder</maml:name>
        <command:parameterValue required="True">Ascending | Descending</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OwaServerUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PreAuthenticatedConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProtocolLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProxyTargetPort</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SSLBindings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SuppressReadReceipt</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UnencryptedOrTLSBindings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>X509CertificateName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AuthenticatedConnectionTimeout</maml:name>
      <maml:description>
        <maml:para>The AuthenticatedConnectionTimeout parameter specifies the time to wait before closing an idle authenticated connection.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Valid input for this parameter is 00:00:30 to 1:00:00. The default setting is 00:30:00 or 30 minutes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Banner</maml:name>
      <maml:description>
        <maml:para>The Banner parameter specifies the banner string displayed after a connection to a Client Access server has been established.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CalendarItemRetrievalOption</maml:name>
      <maml:description>
        <maml:para>The CalendarItemRetrievalOption parameter specifies the type of calendar item returned when the calendar is accessed by using POP3. The default value is iCalendar. You can specify the value for this parameter by using a numerical value or text string. The following values are available:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>0 or iCalendar</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>1 or intranetUrl</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>2 or InternetUrl</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>3 or Custom</maml:para>
        </command:listItem></command:list>
        <maml:para>If you're using 3 or Custom, you must specify the OwaServerUrl parameter setting.</maml:para>
      </maml:description>
      <command:parameterValue required="True">iCalendar | intranetUrl | InternetUrl | Custom</command:parameterValue>
      <dev:type>
        <maml:name>iCalendar | intranetUrl | InternetUrl | Custom</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableExactRFC822Size</maml:name>
      <maml:description>
        <maml:para>The EnableExactRFC822Size parameter calculates the exact size of each MIME message that can be retrieved from the server. When you set this parameter to $true, the exact size of MIME messages stored on the Exchange server is available to POP3 or IMAP4 client programs that rely on knowing the exact size of each MIME message.</maml:para>
        <maml:para>This parameter is set to $false by default. If you don't set this option to $true, the size of each MIME message that the Exchange server returns to POP3 and IMAP4 client programs may be slightly different than the exact size of the message. Because setting this option to $true can negatively affect performance, you should only use this option if many of your users are using a client that requires knowing the exact size of MIME messages.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableGSSAPIAndNTLMAuth</maml:name>
      <maml:description>
        <maml:para>The EnableGSSAPIAndNTLMAuth parameter specifies whether connections can use Integrated Windows authentication (NTLM) by using the Generic Security Services application programming interface (GSSAPI). This setting applies to connections where Transport Layer Security (TLS) is disabled. By default, this parameter is set to $true. You can disable NTLM for POP3 connections by setting the value to $false. NTLM authentication isn't supported for POP3 connections in Microsoft Exchange Server 2010 release to manufacturing (RTM). Support for NTLM authentication for POP3 connections was brought back in Exchange 2010 Service Pack 1 (SP1).</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnforceCertificateErrors</maml:name>
      <maml:description>
        <maml:para>The EnforceCertificateErrors parameter specifies whether to enforce valid Secure Sockets Layer (SSL) certificates. To use this parameter, specify the destination Client Access server for which you want to enforce valid SSL certificates. If the EnforceCertificateErrors parameter is set to $true and the proxy's target certificate isn't valid, the proxy logon attempt fails.</maml:para>
        <maml:para>The default setting is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionPolicy</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionPolicy parameter specifies how you want to use Extended Protection for Authentication for POP3 connections. By default, this parameter is set to None. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Extended Protection for Authentication won't be used.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Allow Extended Protection for Authentication will be used only if the connecting POP3 connection supports it. Otherwise, the connections will be established without Extended Protection for Authentication.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Require Extended Protection for Authentication will be required for all POP3 connections. If the connecting host doesn't support Extended Protection for Authentication, the connection will be rejected.</maml:para>
        </command:listItem></command:list>
        <maml:para>Extended Protection for Authentication enhances the protection and handling of credentials when authenticating network connections using Integrated Windows authentication. Integrated Windows authentication is also known as NTLM. We strongly recommend that you use Extended Protection for Authentication if you're using Integrated Windows authentication. To use Extended Protection for Authentication, the client and server computers must meet the specific requirements. These include operating system requirements and security update requirements. In addition, the POP3 client program must support the use of Extended Protection for Authentication.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      <dev:type>
        <maml:name>None | Allow | Require</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalConnectionSettings</maml:name>
      <maml:description>
        <maml:para>The ExternalConnectionSettings parameter specifies the host name, port, and encryption type that Exchange uses when POP3 clients connect to their email from outside your corporate network.</maml:para>
        <maml:para>Enter a value using the format: &lt;HostName&gt;:&lt;Port&gt;:&lt;Encryption Type&gt;. The &lt;Encryption Type&gt; part of the multivalued value is optional. Valid values for &lt;Encryption Type&gt; are either TLS or SSL.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalConnectionSettings</maml:name>
      <maml:description>
        <maml:para>The InternalConnectionSettings parameter specifies the host name, port, and encryption type used when POP3 clients connect to their email from inside your corporate network. This setting is also used to specify the host name, port, and encryption type used when a user connection is forwarded to another Client Access server.</maml:para>
        <maml:para>Enter a value using the format: &lt;HostName&gt;:&lt;Port&gt;:&lt;Encryption Type&gt;. The &lt;Encryption Type&gt; part of the multivalued value is optional. Valid values for &lt;Encryption Type&gt; are either TLS or SSL. If your server name is Server01 and your domain is Contoso.com, the default value is Server01.Contoso.com:995:SSL, Server01.Contoso.com:110:TLS.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LiveIdBasicAuthReplacement</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogFileLocation</maml:name>
      <maml:description>
        <maml:para>The LogFileLocation parameter specifies the location for the POP3 protocol log files. By default, POP3 protocol log files are located in the C:\Program Files\Microsoft\Exchange Server\V15\Logging\Pop3 directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogFileRollOverSettings</maml:name>
      <maml:description>
        <maml:para>The LogFileRollOverSettings parameter defines how frequently POP3 protocol logging creates a new log file. By default, a new log file is created daily. You can specify the value for this parameter by using a numerical value or text string. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>1 or Hourly</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>2 or Daily</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>3 or Weekly</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>4 or Monthly</maml:para>
        </command:listItem></command:list>
        <maml:para>This setting only applies when the value for the LogPerFileSizeQuota parameter is set to 0.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Hourly | Daily | Weekly | Monthly</command:parameterValue>
      <dev:type>
        <maml:name>Hourly | Daily | Weekly | Monthly</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LoginType</maml:name>
      <maml:description>
        <maml:para>The LoginType parameter specifies the authentication setting used for the Client Access server running the Microsoft Exchange POP3 service. You can specify the value for this parameter by using a numerical value or text string. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>1 or PlainTextLogin</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>2 or PlainTextAuthentication</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>3 or SecureLogin</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is SecureLogin.</maml:para>
      </maml:description>
      <command:parameterValue required="True">PlainTextLogin | PlainTextAuthentication | SecureLogin</command:parameterValue>
      <dev:type>
        <maml:name>PlainTextLogin | PlainTextAuthentication | SecureLogin</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogPerFileSizeQuota</maml:name>
      <maml:description>
        <maml:para>The LogPerFileSizeQuota parameter defines the maximum size of a POP3 protocol log file in bytes. By default, this value is set to 0. When this value is set to 0, a new protocol log file is created at the frequency specified by the LogFileRollOverSettings parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxCommandSize</maml:name>
      <maml:description>
        <maml:para>The MaxCommandSize parameter specifies the maximum size of a single command. The default size is 512 bytes. The possible values are from 40 through 1024 bytes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConnectionFromSingleIP</maml:name>
      <maml:description>
        <maml:para>The MaxConnectionFromSingleIP parameter specifies the number of connections that the specified server accepts from a single IP address. The default value is 2147483647. The possible values are from 1 through 2147483647.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConnections</maml:name>
      <maml:description>
        <maml:para>The MaxConnections parameter specifies the total number of connections that the specified server accepts. This includes authenticated and unauthenticated connections. The default value is 2147483647. The possible values are from 1 through 2147483647.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConnectionsPerUser</maml:name>
      <maml:description>
        <maml:para>The MaxConnectionsPerUser parameter specifies the maximum number of connections that the Client Access server accepts from a particular user. The default value is 16. The possible values are from 1 through 2147483647.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageRetrievalMimeFormat</maml:name>
      <maml:description>
        <maml:para>The MessageRetrievalMimeFormat parameter specifies the format of the messages retrieved from the server. The default value is BestBodyFormat. You can specify the value for this parameter by using a numerical value or text string. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>0 or TextOnly</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>1 or HtmlOnly</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>2 or HtmlAndTextAlternative</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>3 or TextEnrichedOnly</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>4 or TextEnrichedAndTextAlternative</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>5 or BestBodyFormat</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>6 or Tnef</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">TextOnly | HtmlOnly | HtmlAndTextAlternative | TextEnrichedOnly | TextEnrichedAndTextAlternative | BestBodyFormat | Tnef</command:parameterValue>
      <dev:type>
        <maml:name>TextOnly | HtmlOnly | HtmlAndTextAlternative | TextEnrichedOnly | TextEnrichedAndTextAlternative | BestBodyFormat | Tnef</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageRetrievalSortOrder</maml:name>
      <maml:description>
        <maml:para>The MessageRetrievalSortOrder parameter specifies the order in which the retrieved messages are sorted. This value can be either 0 (Ascending) or 1 (Descending). The default value is Ascending.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Ascending | Descending</command:parameterValue>
      <dev:type>
        <maml:name>Ascending | Descending</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OwaServerUrl</maml:name>
      <maml:description>
        <maml:para>The OwaServerUrl parameter specifies the Client Access server from which to retrieve calendar information for instances of custom Microsoft Office Outlook Web App calendar items.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PreAuthenticatedConnectionTimeout</maml:name>
      <maml:description>
        <maml:para>The PreAuthenticatedConnectionTimeout parameter specifies the time to wait before closing an idle connection that isn't authenticated.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Valid input for this parameter is 00:00:30 to 1:00:00.The default value is 00:1:00 or one minute.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProtocolLogEnabled</maml:name>
      <maml:description>
        <maml:para>The ProtocolLogEnabled parameter specifies whether to enable protocol logging. The default setting is $false. For more information, see Configure protocol logging for POP3 and IMAP4.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProxyTargetPort</maml:name>
      <maml:description>
        <maml:para>The ProxyTargetPort parameter specifies the port on the Exchange Server 2003 back-end server to which the Microsoft Exchange POP3 service on a Client Access server relays commands. The default port is 9955.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies an individual Client Access server in your organization for which you're specifying POP3 settings.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SSLBindings</maml:name>
      <maml:description>
        <maml:para>The SSLBindings parameter specifies whether the command sets the IP address and port number to use for an SSL session. This is a multivalued property. Enter a value using the format: &lt;IP address&gt;:&lt;Port number&gt;.</maml:para>
        <maml:para>The default value is 0.0.0.0:995.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SuppressReadReceipt</maml:name>
      <maml:description>
        <maml:para>The SuppressReadReceipt parameter specifies whether to stop duplicate read receipts from being sent to POP3 senders that are using the Send read receipts for messages I send option in their POP3 email program. By default, this option is set to $false. By default, POP3 senders that use the Send read receipts for messages I send option receive a read receipt in both of the following circumstances:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>When messages they send are downloaded by the recipient.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>When the recipient opens the message.</maml:para>
        </command:listItem></command:list>
        <maml:para>The valid values and descriptions for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>$false POP3 users are sent a read receipt each time a recipient downloads a message. POP3 users are also sent a read receipt when the user opens the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>$true POP3 users that use the Send read receipts for messages I send option in their email client programs only receive a read receipt when the recipient opens the message.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UnencryptedOrTLSBindings</maml:name>
      <maml:description>
        <maml:para>The UnencryptedOrTLSBindings parameter specifies the IP address and port number for communication over the TLS-encrypted connection or the connection that isn't encrypted. This is a multivalued property. Enter a value using the format: &lt;IP address&gt;:&lt;Port number&gt;.</maml:para>
        <maml:para>The default value is 0.0.0.0:110.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>X509CertificateName</maml:name>
      <maml:description>
        <maml:para>The X509CertificateName parameter specifies the host name in the SSL certificate from the Associated Subject field.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the plain text or TLS connection to the Client Access server CAS01. In this example, the connection uses an IP address of 10.0.0.0 and a port number of 993.</maml:para>
        <maml:para />
        <maml:para>Set-PopSettings -Server "CAS01" -UnencryptedOrTLSBindings 10.0.0.0:993</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example turns on POP3 protocol logging. It also changes the POP3 protocol logging directory to C:\Pop3Logging.</maml:para>
        <maml:para />
        <maml:para>Set-PopSettings -ProtocolLogEnabled $true -LogFileLocation "C:\Pop3Logging"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example changes the POP3 protocol logging to create a new log file when a log file reaches 2 megabytes (MB).</maml:para>
        <maml:para />
        <maml:para>Set-PopSettings -LogPerFileSizeQuota 2000000</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 4 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example changes the POP3 protocol logging to create a new log file every hour.</maml:para>
        <maml:para />
        <maml:para>Set-PopSettings -LogPerFileSizeQuota 0 -LogFileRollOverSettings Hourly</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can run the Set-PopSettings cmdlet for a single Client Access server that has the Microsoft Exchange POP3 service installed, or for all Exchange Client Access servers that have the Microsoft Exchange POP3 service installed.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "POP3 settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/307a1dd0-3a4c-4431-bd9f-35aa5cb57aad(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>30bd001f-d923-4936-a997-f005a392302e
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-PopSettings</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-POPSettings cmdlet to display the properties of a single server running Microsoft Exchange Server 2013 that has the Client Access server role installed and is running the POP3 service.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>PopSettings</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-PopSettings</maml:name>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies whether the command returns the properties of an individual Client Access server in your organization for which you're viewing POP3 settings.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays the parameters and values for the Client Access server CAS01 running the POP3 service.</maml:para>
        <maml:para />
        <maml:para>Get-POPSettings -Server CAS01</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>With the Get-POPSettings cmdlet, you can view the settings for the POP3 service running on an Exchange Client Access server. Information can only be returned about servers located in the Exchange organization from which the cmdlet is being run.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "POP3 settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/30bd001f-d923-4936-a997-f005a392302e(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>31442c97-1813-43d9-b9d1-da487e6b00ea
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-RemoteDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the New-RemoteDomain cmdlet to create a managed connection for a remote domain. When you create a remote domain, you can control mail flow with more precision, apply message formatting and messaging policies, and specify acceptable character sets for messages sent to and received from the remote domain.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>RemoteDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-RemoteDomain</maml:name>
      <command:parameter required="True">
        <maml:name>DomainName</maml:name>
        <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainName</maml:name>
      <maml:description>
        <maml:para>The DomainName parameter specifies the SMTP domain that you want to establish as a remote domain. Valid input for the DomainName parameter is an SMTP domain. You can use a wildcard character to specify all subdomains of a specified domain, as shown in the following example: *.contoso.com. However, you can't embed a wildcard character, as shown in the following example: domain.*.contoso.com. The domain name string may contain a maximum of 256 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      <dev:type>
        <maml:name>SmtpDomainWithSubdomains</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the remote domain object.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the remote domain Contoso.</maml:para>
        <maml:para />
        <maml:para>New-RemoteDomain -DomainName Contoso.com -Name Contoso</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Remote domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/31442c97-1813-43d9-b9d1-da487e6b00ea(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3536f005-d0c4-4745-aec2-55836d86f5a0
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Enable-ExchangeCertificate</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Enable-ExchangeCertificate cmdlet to enable an existing certificate in the local certificate store for Exchange services such as Internet Information Services (IIS), SMTP, POP, IMAP, and Unified Messaging (UM).</maml:para>
      <maml:para>There are many factors to consider when you configure certificates for Transport Layer Security (TLS) and Secure Sockets Layer (SSL) services. You must understand how these factors may affect your overall configuration.</maml:para>
      <maml:para>Don't use the Enable-ExchangeCertificate cmdlet to enable a wildcard certificate for POP and IMAP services. To enable a wildcard certificate, you must use the Set-ImapSettings or Set-PopSettings cmdlets with the fully qualified domain name (FQDN) of the service.</maml:para>
      <maml:para>Don't use the Enable-ExchangeCertificate cmdlet to enable a certificate for federation. Certificates used for federation trusts are managed by using the New-FederationTrust and Set-FederationTrust cmdlets.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Enable</command:verb>
    <command:noun>ExchangeCertificate</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Enable-ExchangeCertificate</maml:name>
      <command:parameter required="True">
        <maml:name>Thumbprint</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Services</maml:name>
        <command:parameterValue required="True">None | IMAP | POP | UM | IIS | SMTP | Federation | UMCallRouter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DoNotRequireSsl</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>NetworkServiceAllowed</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Enable-ExchangeCertificate</maml:name>
      <command:parameter required="True">
        <maml:name>Services</maml:name>
        <command:parameterValue required="True">None | IMAP | POP | UM | IIS | SMTP | Federation | UMCallRouter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ExchangeCertificateIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DoNotRequireSsl</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>NetworkServiceAllowed</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Services</maml:name>
      <maml:description>
        <maml:para>The Services parameter specifies the services that use the certificate. Valid entries include one or more of the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>IIS</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>IMAP</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POP</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SMTP</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UM</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UMCallRouter</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Federation</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>None</maml:para>
        </command:listItem></command:list>
        <maml:para>To enable a certificate for multiple services, separate each value with a comma, for example:</maml:para>
        <maml:para />
        <maml:para>-Services IMAP,POP,IIS</maml:para>
        <maml:para />
        <maml:para>You can't use the Enable-ExchangeCertificate cmdlet to enable a certificate for federation. Creating or modifying a federation trust enables or modifies how certificates are used for federation.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | IMAP | POP | UM | IIS | SMTP | Federation | UMCallRouter</command:parameterValue>
      <dev:type>
        <maml:name>None | IMAP | POP | UM | IIS | SMTP | Federation | UMCallRouter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Thumbprint</maml:name>
      <maml:description>
        <maml:para>The Thumbprint parameter specifies the certificate that you're enabling. Each certificate contains a thumbprint, which is the digest of the certificate data. To view the thumbprint of a certificate, use the Get-ExchangeCertificate cmdlet.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DoNotRequireSsl</maml:name>
      <maml:description>
        <maml:para>The DoNotRequireSsl switch specifies whether to leave IIS settings unchanged when IIS is one of the enabled services. If IIS is one of the enabled services, the cmdlet changes the default website settings to require SSL. Set the DoNotRequireSsl switch to $true to override this behavior and leave IIS settings unchanged.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to override the confirmation prompt and set the new certificate as the default certificate for TLS for internal SMTP communication. By default, when you enable a certificate for SMTP, the command prompts for confirmation.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the certificate ID.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExchangeCertificateIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ExchangeCertificateIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>NetworkServiceAllowed</maml:name>
      <maml:description>
        <maml:para>The NetworkServiceAllowed switch specifies that the Network Service be allowed permissions to access the certificate specified, without enabling the certificate for SMTP.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the server name on which you want to enable the certificate.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables a certificate for POP, IMAP, SMTP, and IIS services.</maml:para>
        <maml:para />
        <maml:para>Enable-ExchangeCertificate -Thumbprint 5113ae0233a72fccb75b1d0198628675333d010e -Services POP,IMAP,SMTP,IIS</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Enable-ExchangeCertificate cmdlet enables certificates by updating the metadata stored with the certificate. To enable an existing certificate to work with additional Exchange services, use the Enable-ExchangeCertificate cmdlet and specify the additional services.</maml:para>
    <maml:para>The Enable-ExchangeCertificate cmdlet is additive. When you specify a subset of services for which a certificate is enabled, the services that aren't specified aren't removed from the Services property. If you don't want to use an existing enabled certificate for Exchange services, you must enable another certificate, and then remove the certificate you don't want to use.</maml:para>
    <maml:para>Different services have different certificate requirements. For example, some services may only require a server name in the Subject Name or Subject Alternative Name fields of a certificate, whereas other services may require an FQDN. Make sure that the certificate name can support the uses required by the services you enable it for.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Certificate management" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3536f005-d0c4-4745-aec2-55836d86f5a0(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>35871cc3-6e8f-48bc-86ed-8703c0e178f3
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-WebServicesVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-WebServicesVirtualDirectory cmdlet to modify an existing Exchange Web Services virtual directory on a server running Microsoft Exchange Server 2013.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>WebServicesVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-WebServicesVirtualDirectory</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BasicAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CertificateAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DigestAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionFlags</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionSPNList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionTokenChecking</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GzipLevel</maml:name>
        <command:parameterValue required="True">Off | Low | High | Error</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalNLBBypassUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveIdBasicAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveIdNegotiateAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MRSProxyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OAuthAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WindowsAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WSSecurityAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the virtual directory. You can also specify a wildcard character instead of the default website.</maml:para>
      </maml:description>
      <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>VirtualDirectoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BasicAuthentication</maml:name>
      <maml:description>
        <maml:para>The BasicAuthentication parameter specifies whether Basic authentication is enabled on the Exchange Web Services virtual directory. This parameter can be used with the DigestAuthentication, WindowsAuthentication, and WSSecurityAuthentication parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CertificateAuthentication</maml:name>
      <maml:description>
        <maml:para>The CertificateAuthentication parameter specifies whether certificate authentication is enabled. This parameter affects the &lt;Servername&gt;/ews/management/ virtual directory. It doesn't affect the &lt;Servername&gt;/ews/ virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DigestAuthentication</maml:name>
      <maml:description>
        <maml:para>The DigestAuthentication parameter specifies whether Digest authentication is enabled on the virtual directory. This parameter can be used with the BasicAuthentication, WindowsAuthentication, and WSSecurityAuthentication parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionFlags</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionFlags parameter is used to customize the options you use if you're using Extended Protection for Authentication. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Default setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Proxy Specifies that a proxy is terminating the SSL channel. A Service Principal Name (SPN) must be registered in the ExtendedProtectionSPNList parameter if proxy mode is configured.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProxyCoHosting Specifies that both HTTP and HTTPS traffic may be accessing the Client Access server and that a proxy is located between at least some of the clients and the Client Access server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AllowDotlessSPN Specifies whether you want to support valid SPNs that aren't in the fully qualified domain name (FQDN) format, for example ContosoMail. You specify valid SPNs with the ExtendedProtectionSPNList parameter. This option makes extended protection less secure because dotless certificates aren't unique, so it isn't possible to ensure that the client-to-proxy connection was established over a secure channel.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NoServiceNameCheck Specifies that the SPN list won't be checked to validate a channel binding token. This option makes Extended Protection for Authentication less secure. We generally don't recommend this setting.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionSPNList</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionSPNList parameter specifies a list of valid Service Principal Names (SPNs) if you're using Extended Protection for Authentication on the specified virtual directory.</maml:para>
        <maml:para>The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Null This is the default value.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Single SPN or comma delimited list of valid SPNs By default, you must specify the fully qualified domain name (FQDN) (for example mail.contoso.com) for each SPN. If you want to add an SPN that's not an FQDN (for example, ContosoMail), you must also use the ExtendedProtectionTokenChecking parameter with the AllowDotlessSPN value. You specify the domain in SPN format. The SPN format is &lt;protocol&gt;/&lt;FQDN&gt;. For example, a valid entry could be HTTP/mail.contoso.com.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionTokenChecking</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionTokenChecking parameter defines how you want to use Extended Protection for Authentication on the specified Exchange virtual directory. Extended Protection for Authentication isn't enabled by default. The available settings are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Extended Protection for Authentication won't be used. Connections between the client and Exchange won't use Extended Protection for Authentication on this virtual directory. This is the default setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Allow Extended Protection for Authentication will be used for connections between the client and Exchange on this virtual directory if both the client and server support Extended Protection for Authentication. Connections that don't support Extended Protection for Authentication on the client and server will work, but may not be as secure as a connection using Extended Protection for Authentication.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more Service Principal Names (SPNs) by using the ExtendedProtectionSPNList parameter.</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Require Extended Protection for Authentication will be used for all connections between clients and Exchange servers for this virtual directory. If either the client or server doesn't support Extended Protection for Authentication, the connection between the client and server will fail. If you set this option, you must also set a value for the ExtendedProtectionSPNList parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more SPNs using the parameter ExtendedProtectionSPNList.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      <dev:type>
        <maml:name>None | Allow | Require</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalUrl</maml:name>
      <maml:description>
        <maml:para>The ExternalUrl parameter specifies the host name used to connect to the Exchange server from outside the firewall. This setting is also important when Secure Sockets Layer (SSL) is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress the warning or confirmation messages that appear during specific configuration changes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GzipLevel</maml:name>
      <maml:description>
        <maml:para>The GzipLevel parameter sets Gzip configuration information for the Exchange Web Services virtual directory. This parameter can be set to the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Off This value results in no compression.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Low This value results in static compression only. Don't use this setting for Exchange Web Services because Exchange Web Services content is dynamic. You get a warning if you set the GzipLevel parameter to this value. If you use this setting, it behaves the same as the Off setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>High This value results in static and dynamic compression. Content from Exchange Web Services is compressed if clients have indicated support for Gzip compression in their requests.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Error This value identifies errors in the Gzip compression configuration.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Off | Low | High | Error</command:parameterValue>
      <dev:type>
        <maml:name>Off | Low | High | Error</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalNLBBypassUrl</maml:name>
      <maml:description>
        <maml:para>The InternalNLBBypassUrl parameter specifies the URL of the Client Access server, regardless of whether it's behind a Network Load Balancing (NLB) array. Although the InternalUrl parameter is set to the URL of the NLB array, the InternalNLBBypassUrl parameter should always be set to the URL of the Client Access server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalUrl</maml:name>
      <maml:description>
        <maml:para>The InternalUrl parameter specifies the host name of the Exchange server for a connection from inside the firewall. This setting is also important when SSL is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LiveIdBasicAuthentication</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LiveIdNegotiateAuthentication</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MRSProxyEnabled</maml:name>
      <maml:description>
        <maml:para>The MRSProxyEnabled parameter specifies whether to enable MRSProxy for the Client Access server. MRSProxy is a service that runs on Client Access servers in a remote forest and helps to proxy a mailbox move.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OAuthAuthentication</maml:name>
      <maml:description>
        <maml:para>The OAuthAuthentication parameter specifies whether OAuth authentication is enabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WindowsAuthentication</maml:name>
      <maml:description>
        <maml:para>The WindowsAuthentication parameter specifies whether Integrated Windows authentication is permitted on the Exchange Web Services virtual directory. This parameter can be used with the BasicAuthentication, DigestAuthentication, and WSSecurityAuthentication parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WSSecurityAuthentication</maml:name>
      <maml:description>
        <maml:para>The WSSecurityAuthentication parameter specifies whether Web Services Security authentication is enabled on the Exchange Web Services virtual directory. This parameter can be used with BasicAuthentication, DigestAuthentication, and WindowsAuthentication parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the authentication method to Basic authentication for the virtual directory EWS on the server Contoso. This example also sets the external and internal URLs for this virtual directory.</maml:para>
        <maml:para />
        <maml:para>Set-WebServicesVirtualDirectory -Identity Contoso\EWS(Default Web Site)-ExternalUrl https://www.contoso.com/EWS/exchange.asmx -BasicAuthentication $true -InternalUrl https://contoso.internal.com/EWS/exchange.asmx</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example uses a wildcard character instead of "Default Web site" as was used in Example 1.</maml:para>
        <maml:para />
        <maml:para>Set-WebServicesVirtualDirectory -Identity Contoso\EWS* -ExternalUrl https://www.contoso.com/EWS/exchange.asmx</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables MRSProxy on the EWS default website. MRSProxy is the service responsible for assisting in remote mailbox moves.</maml:para>
        <maml:para />
        <maml:para>Set-WebServicesVirtualDirectory -Identity "EWS (Default Web Site)" -MRSProxyEnabled $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>If you have a load balanced set of Client Access servers, you need to specify the name of each Client Access server when you run the command.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Exchange Web Services virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/35871cc3-6e8f-48bc-86ed-8703c0e178f3(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3b6df0fe-27c8-415f-ad0c-8b265f234c1a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-OrganizationConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-OrganizationConfig cmdlet to configure various settings of an Exchange organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>OrganizationConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-OrganizationConfig</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AccountPartition</maml:name>
        <command:parameterValue required="True">AccountPartitionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActivityBasedAuthenticationTimeoutEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActivityBasedAuthenticationTimeoutInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActivityBasedAuthenticationTimeoutWithSingleSignOnEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AppsForOfficeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AVAuthenticationService</maml:name>
        <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ByteEncoderTypeFor7BitCharsets</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CalendarVersionStoreEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomerFeedbackEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderAgeLimit</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderDeletedItemRetention</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderIssueWarningQuota</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderMaxItemSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderMovedItemRetention</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderProhibitPostQuota</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DistributionGroupDefaultOU</maml:name>
        <command:parameterValue required="True">OrganizationalUnitIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DistributionGroupNameBlockedWordsList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DistributionGroupNamingPolicy</maml:name>
        <command:parameterValue required="True">DistributionGroupNamingPolicy</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowEntourage</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowMacOutlook</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowOutlook</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsApplicationAccessPolicy</maml:name>
        <command:parameterValue required="True">EnforceAllowList | EnforceBlockList</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsBlockList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExchangeNotificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExchangeNotificationRecipients</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForwardSyncLiveIdBusinessInstance</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HierarchicalAddressBookRoot</maml:name>
        <command:parameterValue required="True">UserContactGroupIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Industry</maml:name>
        <command:parameterValue required="True">NotSpecified | Agriculture | Finance | BusinessServicesConsulting | Communications | ComputerRelatedProductsServices | Construction | Education | EngineeringArchitecture | Government | Healthcare | Hospitality | Legal | Manufacturing | MediaMarketingAdvertising | Mining | NonProfit | PersonalServices | PrintingPublishing | RealEstate | Retail | Transportation | Utilities | Wholesale | Other</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsExcludedFromOffboardMigration</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsExcludedFromOnboardMigration</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsFfoMigrationInProgress</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsGuidPrefixedLegacyDnDisabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsMailboxForcedReplicationDisabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsProcessEhaMigratedMessagesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsSyncPropertySetUpgradeAllowed</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsAllTipsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsExternalRecipientsTipsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsGroupMetricsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsLargeAudienceThreshold</maml:name>
        <command:parameterValue required="True">UInt32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsMailboxSourcedTipsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ManagedFolderHomepage</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MapiHttpEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConcurrentMigrations</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientEmailAddresses</maml:name>
        <command:parameterValue required="True">ProxyAddressCollection</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientEmailAddressPolicyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientPrimarySmtpAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientReplyRecipient</maml:name>
        <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrganizationSummary</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PreferredInternetCodePageForShiftJis</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicComputersDetectionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicFolderMigrationComplete</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicFoldersEnabled</maml:name>
        <command:parameterValue required="True">None | Local | Remote</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicFoldersLockedForMigration</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReadTrackingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReleaseTrack</maml:name>
        <command:parameterValue required="True">None | FirstRelease | Preview</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RemotePublicFolderMailboxes</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequiredCharsetCoverage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RmsoSubscriptionStatus</maml:name>
        <command:parameterValue required="True">Unknown | Enabled | Suspended | LockedOut | AdhocEnabled | Deleted</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SCLJunkThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SharePointUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SIPAccessService</maml:name>
        <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SIPSessionBorderController</maml:name>
        <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SiteMailboxCreationURL</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TenantRelocationsAllowed</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UMAvailableLanguages</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WACDiscoveryEndpoint</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-OrganizationConfig</maml:name>
      <command:parameter required="False">
        <maml:name>AdfsAuthenticationConfiguration</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AccountPartition</maml:name>
        <command:parameterValue required="True">AccountPartitionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActivityBasedAuthenticationTimeoutEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActivityBasedAuthenticationTimeoutInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActivityBasedAuthenticationTimeoutWithSingleSignOnEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AppsForOfficeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AVAuthenticationService</maml:name>
        <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ByteEncoderTypeFor7BitCharsets</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CalendarVersionStoreEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomerFeedbackEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderAgeLimit</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderDeletedItemRetention</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderIssueWarningQuota</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderMaxItemSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderMovedItemRetention</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderProhibitPostQuota</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DistributionGroupDefaultOU</maml:name>
        <command:parameterValue required="True">OrganizationalUnitIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DistributionGroupNameBlockedWordsList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DistributionGroupNamingPolicy</maml:name>
        <command:parameterValue required="True">DistributionGroupNamingPolicy</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowEntourage</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowMacOutlook</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowOutlook</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsApplicationAccessPolicy</maml:name>
        <command:parameterValue required="True">EnforceAllowList | EnforceBlockList</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsBlockList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExchangeNotificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExchangeNotificationRecipients</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForwardSyncLiveIdBusinessInstance</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HierarchicalAddressBookRoot</maml:name>
        <command:parameterValue required="True">UserContactGroupIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Industry</maml:name>
        <command:parameterValue required="True">NotSpecified | Agriculture | Finance | BusinessServicesConsulting | Communications | ComputerRelatedProductsServices | Construction | Education | EngineeringArchitecture | Government | Healthcare | Hospitality | Legal | Manufacturing | MediaMarketingAdvertising | Mining | NonProfit | PersonalServices | PrintingPublishing | RealEstate | Retail | Transportation | Utilities | Wholesale | Other</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsExcludedFromOffboardMigration</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsExcludedFromOnboardMigration</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsFfoMigrationInProgress</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsGuidPrefixedLegacyDnDisabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsMailboxForcedReplicationDisabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsProcessEhaMigratedMessagesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsSyncPropertySetUpgradeAllowed</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsAllTipsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsExternalRecipientsTipsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsGroupMetricsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsLargeAudienceThreshold</maml:name>
        <command:parameterValue required="True">UInt32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsMailboxSourcedTipsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ManagedFolderHomepage</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MapiHttpEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConcurrentMigrations</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientEmailAddresses</maml:name>
        <command:parameterValue required="True">ProxyAddressCollection</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientEmailAddressPolicyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientPrimarySmtpAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientReplyRecipient</maml:name>
        <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrganizationSummary</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PreferredInternetCodePageForShiftJis</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicComputersDetectionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicFolderMigrationComplete</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicFoldersEnabled</maml:name>
        <command:parameterValue required="True">None | Local | Remote</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicFoldersLockedForMigration</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReadTrackingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReleaseTrack</maml:name>
        <command:parameterValue required="True">None | FirstRelease | Preview</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RemotePublicFolderMailboxes</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequiredCharsetCoverage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RmsoSubscriptionStatus</maml:name>
        <command:parameterValue required="True">Unknown | Enabled | Suspended | LockedOut | AdhocEnabled | Deleted</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SCLJunkThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SharePointUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SIPAccessService</maml:name>
        <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SIPSessionBorderController</maml:name>
        <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SiteMailboxCreationURL</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TenantRelocationsAllowed</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UMAvailableLanguages</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WACDiscoveryEndpoint</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-OrganizationConfig</maml:name>
      <command:parameter required="False">
        <maml:name>AdfsAudienceUris</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdfsEncryptCertificateThumbprint</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdfsIssuer</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdfsSignCertificateThumbprints</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AccountPartition</maml:name>
        <command:parameterValue required="True">AccountPartitionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActivityBasedAuthenticationTimeoutEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActivityBasedAuthenticationTimeoutInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ActivityBasedAuthenticationTimeoutWithSingleSignOnEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AppsForOfficeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AVAuthenticationService</maml:name>
        <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ByteEncoderTypeFor7BitCharsets</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CalendarVersionStoreEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CustomerFeedbackEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderAgeLimit</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderDeletedItemRetention</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderIssueWarningQuota</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderMaxItemSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderMovedItemRetention</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultPublicFolderProhibitPostQuota</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DistributionGroupDefaultOU</maml:name>
        <command:parameterValue required="True">OrganizationalUnitIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DistributionGroupNameBlockedWordsList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DistributionGroupNamingPolicy</maml:name>
        <command:parameterValue required="True">DistributionGroupNamingPolicy</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowEntourage</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowMacOutlook</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsAllowOutlook</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsApplicationAccessPolicy</maml:name>
        <command:parameterValue required="True">EnforceAllowList | EnforceBlockList</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsBlockList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EwsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExchangeNotificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExchangeNotificationRecipients</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForwardSyncLiveIdBusinessInstance</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HierarchicalAddressBookRoot</maml:name>
        <command:parameterValue required="True">UserContactGroupIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Industry</maml:name>
        <command:parameterValue required="True">NotSpecified | Agriculture | Finance | BusinessServicesConsulting | Communications | ComputerRelatedProductsServices | Construction | Education | EngineeringArchitecture | Government | Healthcare | Hospitality | Legal | Manufacturing | MediaMarketingAdvertising | Mining | NonProfit | PersonalServices | PrintingPublishing | RealEstate | Retail | Transportation | Utilities | Wholesale | Other</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsExcludedFromOffboardMigration</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsExcludedFromOnboardMigration</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsFfoMigrationInProgress</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsGuidPrefixedLegacyDnDisabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsMailboxForcedReplicationDisabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsProcessEhaMigratedMessagesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsSyncPropertySetUpgradeAllowed</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsAllTipsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsExternalRecipientsTipsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsGroupMetricsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsLargeAudienceThreshold</maml:name>
        <command:parameterValue required="True">UInt32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailTipsMailboxSourcedTipsEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ManagedFolderHomepage</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MapiHttpEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConcurrentMigrations</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientEmailAddresses</maml:name>
        <command:parameterValue required="True">ProxyAddressCollection</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientEmailAddressPolicyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientPrimarySmtpAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MicrosoftExchangeRecipientReplyRecipient</maml:name>
        <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrganizationSummary</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PreferredInternetCodePageForShiftJis</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicComputersDetectionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicFolderMigrationComplete</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicFoldersEnabled</maml:name>
        <command:parameterValue required="True">None | Local | Remote</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PublicFoldersLockedForMigration</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReadTrackingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReleaseTrack</maml:name>
        <command:parameterValue required="True">None | FirstRelease | Preview</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RemotePublicFolderMailboxes</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequiredCharsetCoverage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RmsoSubscriptionStatus</maml:name>
        <command:parameterValue required="True">Unknown | Enabled | Suspended | LockedOut | AdhocEnabled | Deleted</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SCLJunkThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SharePointUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SIPAccessService</maml:name>
        <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SIPSessionBorderController</maml:name>
        <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SiteMailboxCreationURL</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TenantRelocationsAllowed</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UMAvailableLanguages</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WACDiscoveryEndpoint</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AccountPartition</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AccountPartitionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AccountPartitionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActivityBasedAuthenticationTimeoutEnabled</maml:name>
      <maml:description>
        <maml:para>The ActivityBasedAuthenticationTimeoutEnabled parameter specifies whether the timed logoff feature is enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActivityBasedAuthenticationTimeoutInterval</maml:name>
      <maml:description>
        <maml:para>The ActivityBasedAuthenticationTimeoutInterval parameter specifies the time span for logoff.</maml:para>
        <maml:para>You enter this value as a time span: hh:mm:ss where hh = hours, mm = minutes and ss = seconds.</maml:para>
        <maml:para>Valid values for this parameter are from 00:05:00 to 08:00:00 (5 minutes to 8 hours). The default value is 06:00:00 (6 hours).</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ActivityBasedAuthenticationTimeoutWithSingleSignOnEnabled</maml:name>
      <maml:description>
        <maml:para>The ActivityBasedAuthenticationTimeoutWithSingleSignOnEnabled parameter specifies whether to keep single sign-on enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdfsAudienceUris</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The AdfsAudienceUris parameter specifies one or more external URLs that are used for Active Directory Federation Services (AD FS) claims-based authentication. For example, the external Outlook Web App and external Exchange admin center (EAC) URLs.</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
        <maml:para>For more information about configuring AD FS claims based authentication in Exchange, see Using AD FS claims-based authentication with Outlook Web App and EAC.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdfsAuthenticationConfiguration</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdfsEncryptCertificateThumbprint</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The AdfsEncryptCertificateThumbprint parameter specifies the service communication SSL certificate that's used for AD FS claims-based authentication. This parameter uses a certificate thumbprint (GUID) value to identify the certificate.</maml:para>
        <maml:para>To get the thumbprint value for the service communication SSL certificate, open Windows PowerShell on the AD FS server and run the command Get-ADFSCertificate -CertificateType "Service-Communications". For more information, see Get-ADFSCertificate (http://go.microsoft.com/fwlink/?LinkId=392706).</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdfsIssuer</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The AdfsIssuer parameter specifies URL of the AD FS server that's used for AD FS claims-based authentication. This is the URL where AD FS relying parties send users for authentication.</maml:para>
        <maml:para>To get this value, open Windows PowerShell on the AD FS server and run the command Get-ADFSEndpoint -AddressPath /adfs/ls | Format-List FullUrl.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdfsSignCertificateThumbprints</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The AdfsSignCertificateThumbprints parameter specifies one or more X.509 token-signing certificates that are used for AD FS claims-based authentication. This parameter uses certificate thumbprint values (GUIDs) to identify the certificates.</maml:para>
        <maml:para>To get the thumbprint values of the primary and secondary token-signing certificates, open Windows PowerShell on the AD FS server and run the command Get-ADFSCertificate -CertificateType "Token-signing". For more information, see Get-ADFSCertificate (http://go.microsoft.com/fwlink/?LinkId=392706).</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AppsForOfficeEnabled</maml:name>
      <maml:description>
        <maml:para>The AppsForOfficeEnabled parameter specifies whether to enable apps for Microsoft Outlook features. By default, the parameter is set to $true. If the flag is set to $false, no new apps can be activated for any user in the organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AVAuthenticationService</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      <dev:type>
        <maml:name>ProtocolConnectionSettings</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ByteEncoderTypeFor7BitCharsets</maml:name>
      <maml:description>
        <maml:para>The ByteEncoderTypeFor7BitCharsets parameter specifies the 7-bit transfer encoding method for MIME format for messages sent to this remote domain. The valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>0 Always use default 7-bit transfer encoding for HTML and plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>1 Always use QP (quoted-printable) encoding for HTML and plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>2 Always use Base64 encoding for HTML and plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>5 Use QP encoding for HTML and plain text unless line wrapping is enabled in plain text. If line wrapping is enabled, use 7-bit encoding for plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>6 Use Base64 encoding for HTML and plain text, unless line wrapping is enabled in plain text. If line wrapping is enabled in plain text, use Base64 encoding for HTML, and use 7-bit encoding for plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>13 Always use QP encoding for HTML. Always use 7-bit encoding for plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>14 Always use Base64 encoding for HTML. Always use 7-bit encoding for plain text.</maml:para>
        </command:listItem></command:list>
        <maml:para>If no value is specified, Exchange always uses QP encoding for HTML and plain text.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CalendarVersionStoreEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CustomerFeedbackEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The CustomerFeedbackEnabled parameter specifies whether the server running Microsoft Exchange is enrolled in the Microsoft Customer Experience Improvement Program.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DefaultPublicFolderAgeLimit</maml:name>
      <maml:description>
        <maml:para>The DefaultPublicFolderAgeLimit parameter specifies the default age limit for public folders across the entire organization. A public folder is automatically deleted when this age limit is exceeded. This attribute applies to all public folders in the organization that don't have their own AgeLimit setting.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DefaultPublicFolderDeletedItemRetention</maml:name>
      <maml:description>
        <maml:para>The DefaultPublicFolderDeletedItemRetention parameter specifies the default value of the length of time to retain deleted items for public folders across the entire organization. This attribute applies to all public folders in the organization that don't have their own RetainDeletedItemsFor attribute set.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DefaultPublicFolderIssueWarningQuota</maml:name>
      <maml:description>
        <maml:para>The DefaultPublicFolderIssueWarningQuota parameter specifies the default value across the entire organization for the public folder size at which a warning message is sent to this folder's owners, warning that the public folder is almost full. This attribute applies to all public folders within the organization that don't have their own warning quota attribute set. The default value of this attribute is unlimited.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 0 through 2199023254529 bytes(2 TB). If you enter a value of unlimited, no size limit is imposed on the public folder.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DefaultPublicFolderMaxItemSize</maml:name>
      <maml:description>
        <maml:para>The DefaultPublicFolderMaxItemSize parameter specifies the default maximum size for posted items within public folders across the entire organization. Items larger than the value of the DefaultPublicFolderMaxItemSize parameter are rejected. This attribute applies to all public folders within the organization that don't have their own MaxItemSize attribute set. The default value of this attribute is unlimited.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 0 through 2199023254529 bytes (2 TB). If you enter a value of unlimited, no size limit is imposed on the public folder.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DefaultPublicFolderMovedItemRetention</maml:name>
      <maml:description>
        <maml:para>The DefaultPublicFolderMovedItemRetention parameter specifies how long items that have been moved between mailboxes are kept in the source mailbox for recovery purposes before being removed by the Public Folder Assistant.</maml:para>
        <maml:para>When you move folder contents between mailboxes, a copy of the original data is left on the source mailbox, inaccessible for users but available for recovery by system administrators. If the move process fails and you want to roll it back, use the Set-PublicFolder -OverrideContentMailbox command to recover data. For more information, see Set-PublicFolder.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DefaultPublicFolderProhibitPostQuota</maml:name>
      <maml:description>
        <maml:para>The DefaultPublicFolderProhibitPostQuota parameter specifies the size of a public folder at which users are notified that the public folder is full. Users can't post to a folder whose size is larger than the DefaultPublicFolderProhibitPostQuota parameter value. The default value of this attribute is unlimited.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 0 through 2199023254529 bytes (2 TB). If you enter a value of unlimited, no size limit is imposed on the public folder.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DistributionGroupDefaultOU</maml:name>
      <maml:description>
        <maml:para>The DistributionGroupDefaultOU parameter specifies the container where distribution groups are created by default.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationalUnitIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationalUnitIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DistributionGroupNameBlockedWordsList</maml:name>
      <maml:description>
        <maml:para>The DistributionGroupNameBlockedWordsList parameter specifies words that can't be included in the names of distribution groups. Separate multiple values with commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DistributionGroupNamingPolicy</maml:name>
      <maml:description>
        <maml:para>The DistributionGroupNamingPolicy parameter specifies the template applied to the name of distribution groups that are created in the organization. You can enforce that a prefix or suffix be applied to all distribution groups. Prefixes and suffixes can be either a string or an attribute, and you can combine strings and attributes. When creating a naming policy, use the following syntax:</maml:para>
        <maml:para>"prefix&lt;GroupName&gt;suffix"</maml:para>
        <maml:para>Don't set the &lt;GroupName&gt;. Users create the name when they create the distribution group. You can have multiple prefixes and suffixes.</maml:para>
        <maml:para>You can use the following attributes that will be gathered from the user who's creating the distribution group mailbox settings:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Department</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Company</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Office</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>StateOrProvince</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CountryorRegion</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CountryCode</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Title</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CustomAttribute1 to CustomAttribute15</maml:para>
        </command:listItem></command:list>
        <maml:para>To create a naming policy using an attribute, use the following syntax: "&lt;PrefixAttribute&gt;&lt;GroupName&gt;&lt;SuffixAttribute&gt;".</maml:para>
        <maml:para>For example, to create a naming policy using the Department as a prefix and CustomAttribute1 as the suffix:</maml:para>
        <maml:para>"&lt;Department&gt;&lt;GroupName&gt;&lt;CustomAttribute1&gt;".</maml:para>
        <maml:para>To create a naming policy using strings, use the following syntax "string&lt;GroupName&gt;string". For example to create a naming policy using the string "DL_" as the prefix use the following syntax: "DL_&lt;GroupName&gt;".</maml:para>
      </maml:description>
      <command:parameterValue required="True">DistributionGroupNamingPolicy</command:parameterValue>
      <dev:type>
        <maml:name>DistributionGroupNamingPolicy</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EwsAllowEntourage</maml:name>
      <maml:description>
        <maml:para>The EwsAllowEntourage parameter specifies whether to enable or disable Entourage 2008 to access Exchange Web Services (EWS) for the entire organization. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EwsAllowList</maml:name>
      <maml:description>
        <maml:para>The EwsAllowList parameter specifies the applications (user agent strings) that can access EWS when the EwsApplicationAccessPolicy parameter is set to EnforceAllowList.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EwsAllowMacOutlook</maml:name>
      <maml:description>
        <maml:para>The EwsAllowMacOutlook parameter specifies whether to enable or disable Microsoft Outlook for Mac 2011 to access EWS for the entire organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EwsAllowOutlook</maml:name>
      <maml:description>
        <maml:para>The EwsAllowOutlook parameter enables or disables Microsoft Office Outlook 2007 to access EWS for the entire organization. Outlook 2007 uses EWS for free and busy information, out-of-office settings, and calendar sharing.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EwsApplicationAccessPolicy</maml:name>
      <maml:description>
        <maml:para>The EwsApplicationAccessPolicy parameter defines which applications other than Entourage, Mac Outlook, and Outlook can access EWS. If set to EnforceAllowList, only applications specified in the EwsAllowList parameter are allowed access to EWS. If set to EnforceBlockList, every application is allowed access to EWS except the ones specified in the EwsBlockList parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnforceAllowList | EnforceBlockList</command:parameterValue>
      <dev:type>
        <maml:name>EnforceAllowList | EnforceBlockList</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EwsBlockList</maml:name>
      <maml:description>
        <maml:para>The EwsBlockList parameter specifies the applications that can't access EWS when the EwsApplicationAccessPolicy parameter is set to EnforceBlockList.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EwsEnabled</maml:name>
      <maml:description>
        <maml:para>The EwsEnabled parameter specifies whether to globally enable or disable EWS access for the entire organization, regardless of what application is making the request.</maml:para>
        <maml:para>When the EwsEnabled parameter is set to $false, EWS access is turned off, regardless of the values of the EwsAllowEntourage, EwsAllowMacOutlook, and EwsAllowOutlook parameters. For the EwsAllowEntourage, EwsAllowMacOutlook, EwsAllowOutlook parameters to be meaningful, the EwsEnabled parameter must be set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExchangeNotificationEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The ExchangeNotificationEnabled parameter enables or disables Exchange notifications sent to administrators regarding their organizations. Valid input for this parameter is $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExchangeNotificationRecipients</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in the cloud-based service.</maml:para>
        <maml:para>The ExchangeNotificationRecipients parameter specifies the recipients for Exchange notifications sent to administrators regarding their organizations. If the ExchangeNotificationEnabled parameter is set to $false, no notification messages are sent. Be sure to enclose values that contain spaces in quotation marks (") and separate multiple values with commas. If this parameter isn't set, Exchange notifications are sent to all administrators.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ForwardSyncLiveIdBusinessInstance</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HierarchicalAddressBookRoot</maml:name>
      <maml:description>
        <maml:para>The HierarchicalAddressBookRoot parameter specifies the user, contact, or group to be used as the root organization for a hierarchical address book in the Exchange organization. Setting a value for this parameter enables the hierarchical address book to be automatically displayed in Outlook for the organization. The default value is $null.</maml:para>
        <maml:para>This parameter accepts the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Canonical name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Primary SMTP email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">UserContactGroupIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>UserContactGroupIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the identity of the tenant organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Industry</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The Industry parameter specifies the industry that best represents your organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">NotSpecified | Agriculture | Finance | BusinessServicesConsulting | Communications | ComputerRelatedProductsServices | Construction | Education | EngineeringArchitecture | Government | Healthcare | Hospitality | Legal | Manufacturing | MediaMarketingAdvertising | Mining | NonProfit | PersonalServices | PrintingPublishing | RealEstate | Retail | Transportation | Utilities | Wholesale | Other</command:parameterValue>
      <dev:type>
        <maml:name>NotSpecified | Agriculture | Finance | BusinessServicesConsulting | Communications | ComputerRelatedProductsServices | Construction | Education | EngineeringArchitecture | Government | Healthcare | Hospitality | Legal | Manufacturing | MediaMarketingAdvertising | Mining | NonProfit | PersonalServices | PrintingPublishing | RealEstate | Retail | Transportation | Utilities | Wholesale | Other</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsExcludedFromOffboardMigration</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The IsExcludedFromOffboardMigration parameter specifies that no new moves from the cloud to your on-premises organization are permitted. When this flag is set, no offboarding move requests are allowed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsExcludedFromOnboardMigration</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The IsExcludedFromOnboardMigration parameter specifies that no new moves from your on-premises organization to the cloud are permitted. When this flag is set, no onboarding move requests are allowed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsFfoMigrationInProgress</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsGuidPrefixedLegacyDnDisabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsMailboxForcedReplicationDisabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsProcessEhaMigratedMessagesEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsSyncPropertySetUpgradeAllowed</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailTipsAllTipsEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MailTipsAllTipsEnabled parameter specifies whether MailTips are enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailTipsExternalRecipientsTipsEnabled</maml:name>
      <maml:description>
        <maml:para>The MailTipsExternalRecipientsTipsEnabled parameter specifies whether MailTips for external recipients are enabled. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailTipsGroupMetricsEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MailTipsGroupMetricsEnabled parameter specifies whether MailTips that rely on group metrics data are enabled. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailTipsLargeAudienceThreshold</maml:name>
      <maml:description>
        <maml:para>The MailTipsLargeAudienceThreshold parameter specifies what a large audience is. The default value is 25.</maml:para>
      </maml:description>
      <command:parameterValue required="True">UInt32</command:parameterValue>
      <dev:type>
        <maml:name>UInt32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailTipsMailboxSourcedTipsEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MailTipsMailboxSourcedTipsEnabled parameter specifies whether MailTips that rely on mailbox data (out-of-office or full mailbox) are enabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ManagedFolderHomepage</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The ManagedFolderHomepage parameter specifies the URL of the web page that's displayed when users click the Managed Folders folder in Microsoft Outlook. If a URL isn't specified, Outlook doesn't display a managed folders home page.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MapiHttpEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MapiHttpEnabled parameter enables or disables Microsoft Outlook connections to mailboxes by using the MAPIHTTP protocol. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConcurrentMigrations</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MaxConcurrentMigrations parameter specifies the maximum number of concurrent migrations that your organization can configure at any specific time.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MicrosoftExchangeRecipientEmailAddresses</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MicrosoftExchangeRecipientEmailAddresses parameter specifies one or more email addresses for the recipient. All valid Microsoft Exchange email address types may be used. You can specify multiple values for this parameter as a comma-delimited list. If the MicrosoftExchangeRecipientEmailAddressPolicyEnabled parameter is set to $true, the email addresses are automatically generated by the default email address policy. This means you can't use the MicrosoftExchangeRecipientEmailAddresses parameter.</maml:para>
        <maml:para>Email addresses that you specify by using the MicrosoftExchangeRecipientEmailAddresses parameter replace any existing email addresses already configured.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ProxyAddressCollection</command:parameterValue>
      <dev:type>
        <maml:name>ProxyAddressCollection</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MicrosoftExchangeRecipientEmailAddressPolicyEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MicrosoftExchangeRecipientEmailAddressPolicyEnabled parameter specifies whether the default email address policy is automatically applied to the Exchange recipient. The default value is $true. If this parameter is set to $true, Exchange automatically adds new email addresses to the Exchange recipient when email address policies are added or modified in the Exchange organization. If this parameter is set to $false, you must manually add new email addresses to the Exchange recipient when email address policies are added or modified.</maml:para>
        <maml:para>If you change the value of the MicrosoftExchangeRecipientEmailAddressPolicyEnabled parameter from $false to $true, any email addresses that you defined by using the MicrosoftExchangeRecipientEmailAddresses parameter are preserved. However, the value of the MicrosoftExchangeRecipientPrimarySmtpAddress parameter reverts to MicrosoftExchange329e71ec88ae4615bbc36ab6ce41109e@&lt;Accepted Domain in Highest Priority Email Address Policy&gt;.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MicrosoftExchangeRecipientPrimarySmtpAddress</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MicrosoftExchangeRecipientPrimarySmtpAddress parameter specifies the primary return SMTP email address for the Exchange recipient. If the MicrosoftExchangeRecipientEmailAddressPolicyEnabled parameter is set to $true, you can't use the MicrosoftExchangeRecipientPrimarySmtpAddress parameter.</maml:para>
        <maml:para>If you modify the value of the MicrosoftExchangeRecipientPrimarySmtpAddress parameter, the value is automatically added to the list of email addresses defined in the MicrosoftExchangeRecipientEmailAddresses parameter.</maml:para>
        <maml:para>The MicrosoftExchangeRecipientPrimarySmtpAddress parameter is meaningful only if the Exchange recipient has more than one defined SMTP email address. If the MicrosoftExchangeRecipientEmailAddresses parameter has only one defined SMTP email address, the value of the MicrosoftExchangeRecipientPrimarySmtpAddress parameter and the MicrosoftExchangeRecipientEmailAddresses parameter are the same.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MicrosoftExchangeRecipientReplyRecipient</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MicrosoftExchangeRecipientReplyRecipient parameter specifies the recipient that should receive messages sent to the Exchange recipient. Typically, you would configure a mailbox to receive the messages sent to the Exchange recipient. You can use any of the following values for the specified recipient:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Canonical name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange DN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Primary SMTP email address</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't configure a recipient for the Exchange recipient, messages sent to the Exchange recipient are discarded.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OrganizationSummary</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The OrganizationSummary parameter specifies a summarized description that best represents your organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PreferredInternetCodePageForShiftJis</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PublicComputersDetectionEnabled</maml:name>
      <maml:description>
        <maml:para>The PublicComputersDetectionEnabled parameter specifies whether Exchange Online will detect when a user signs in to Outlook Web App from a public or private computer or network, and then enforces the attachment handling settings from public networks. The default is $false. However, if you set this parameter to $true, Exchange Online will determine if the user is signing in to Outlook Web App from a public computer, and all public attachment handling rules will be applied and enforced.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PublicFolderMigrationComplete</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The PublicFolderMigrationComplete parameter is used during public folder migration. When you set the PublicFolderMigrationComplete parameter to $true, transport starts rerouting the queued messages to a new destination. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PublicFoldersEnabled</maml:name>
      <maml:description>
        <maml:para>The PublicFoldersEnabled parameter specifies how public folders are deployed in your organization. This parameter uses one of the following values.</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Local The public folders are deployed locally in your organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Remote The public folders are deployed in the remote forest.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>None No public folders are deployed for this organization.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">None | Local | Remote</command:parameterValue>
      <dev:type>
        <maml:name>None | Local | Remote</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PublicFoldersLockedForMigration</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The PublicFoldersLockedForMigration parameter specifies whether users are locked out from accessing down level public folder servers. When you set the PublicFoldersLockedForMigration parameter to $true, users are locked out from accessing down level public folder servers. This is used for public folder migration during final stages. The default value is $false, which means that the user is able to access public folder servers.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReadTrackingEnabled</maml:name>
      <maml:description>
        <maml:para>The ReadTrackingEnabled parameter specifies whether the tracking for read status for messages in an organization is enabled. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReleaseTrack</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | FirstRelease | Preview</command:parameterValue>
      <dev:type>
        <maml:name>None | FirstRelease | Preview</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RemotePublicFolderMailboxes</maml:name>
      <maml:description>
        <maml:para>The RemotePublicFolderMailboxes parameter specifies the identities of the public folder objects (represented as mail user objects locally) corresponding to the public folder mailboxes created in the remote forest. The public folder values set here are used only if the public folder deployment is a remote deployment.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequiredCharsetCoverage</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RmsoSubscriptionStatus</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unknown | Enabled | Suspended | LockedOut | AdhocEnabled | Deleted</command:parameterValue>
      <dev:type>
        <maml:name>Unknown | Enabled | Suspended | LockedOut | AdhocEnabled | Deleted</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SCLJunkThreshold</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The SCLJunkThreshold parameter specifies the spam confidence level (SCL) threshold. Messages with an SCL greater than the value that you specify for the SCLJunkThreshold parameter are moved to the Junk Email folder. Valid values are integers from 0 through 9, inclusive.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SharePointUrl</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SIPAccessService</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      <dev:type>
        <maml:name>ProtocolConnectionSettings</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SIPSessionBorderController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ProtocolConnectionSettings</command:parameterValue>
      <dev:type>
        <maml:name>ProtocolConnectionSettings</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SiteMailboxCreationURL</maml:name>
      <maml:description>
        <maml:para>The SiteMailboxCreationURL parameter specifies whether to create a site from a Microsoft Exchange Server 2013 mailbox.</maml:para>
        <maml:para>The mailbox must be running Microsoft Outlook 2013.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TenantRelocationsAllowed</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UMAvailableLanguages</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The UMAvailableLanguages parameter will be removed in future versions of the product.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WACDiscoveryEndpoint</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a distribution group naming policy using the following configuration:</maml:para>
        <maml:para />
        <maml:para>Distribution groups will be created in the Users\Groups container.</maml:para>
        <maml:para>The words curse, bad, and offensive will be blocked from being used in distribution group names.</maml:para>
        <maml:para>All distribution groups will be prefixed with "DL_" and suffixed with an underscore (_) and the user's department and country code.</maml:para>
        <maml:para>Set-OrganizationConfig -DistributionGroupDefaultOU Users\Groups -DistributionGroupNameBlockedWordsList curse,bad,offensive -DistributionGroupNamingPolicy "DL_&lt;GroupName&gt;_&lt;Department&gt;&lt;CountryCode&gt;"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Exchange server configuration settings" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3b6df0fe-27c8-415f-ad0c-8b265f234c1a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3c1e90e7-cf49-4a8b-a0c4-c189ab8ab166
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-DataClassification</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the New-DataClassification cmdlet to create data classification rules that use document fingerprints.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>DataClassification</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-DataClassification</maml:name>
      <command:parameter required="True">
        <maml:name>Description</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Fingerprints</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ClassificationRuleCollectionIdentity</maml:name>
        <command:parameterValue required="True">ClassificationRuleCollectionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Locale</maml:name>
        <command:parameterValue required="True">CultureInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Description</maml:name>
      <maml:description>
        <maml:para>The Description parameter specifies a description for the data classification rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Fingerprints</maml:name>
      <maml:description>
        <maml:para>The Fingerprints parameter specifies the byte-encoded files to use as document fingerprints. You can use multiple document fingerprints separated by commas. For instructions on how to import documents to use as templates for fingerprints, see New-Fingerprint or the section.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a name for the data classification rule. The value must be less than 256 characters.</maml:para>
        <maml:para>The value of this parameter is used in the Policy Tip that's presented to users in Outlook Web App.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ClassificationRuleCollectionIdentity</maml:name>
      <maml:description>
        <maml:para>The ClassificationRuleCollectionIdentity parameter is reserved for future use.</maml:para>
        <maml:para>New data classification rules that you create are automatically added to the classification rule collection named Fingerprint Classification Collection.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ClassificationRuleCollectionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ClassificationRuleCollectionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Locale</maml:name>
      <maml:description>
        <maml:para>The Locale parameter specifies the language that's associated with the data classification rule. Valid input for this parameter is a Microsoft .NET Framework CultureInfo class culture code value. For example, en for English or fr for French. If you don't specify a value for the Locale parameter, the default language of your Exchange organization is used when you create the data classification rule.</maml:para>
        <maml:para>You can add additional language translations to the data classification rule by using the Set-DataClassification cmdlet.</maml:para>
      </maml:description>
      <command:parameterValue required="True">CultureInfo</command:parameterValue>
      <dev:type>
        <maml:name>CultureInfo</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a new data classification rule named "Contoso Employee-Customer Confidential" that uses the document fingerprints of the files C:\My Documents\Contoso Employee Template.docx and D:\Data\Contoso Customer Template.docx.</maml:para>
        <maml:para />
        <maml:para>$Employee_Template = Get-Content "C:\My Documents\Contoso Employee Template.docx" -Encoding byte</maml:para>
        <maml:para>$Employee_Fingerprint = New-Fingerprint -FileData $Employee_Template -Description "Contoso Employee Template"</maml:para>
        <maml:para>$Customer_Template = Get-Content "D:\Data\Contoso Customer Template.docx" -Encoding byte</maml:para>
        <maml:para>$Customer_Fingerprint = New-Fingerprint -FileData $Customer_Template -Description "Contoso Customer Template"</maml:para>
        <maml:para>New-DataClassification -Name "Contoso Employee-Customer Confidential" -Fingerprints $Employee_Fingerprint,$Customer_Fingerprint -Description "Message contains Contoso employee or customer information."</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Classification rule packages are used by data loss prevention (DLP) to detect sensitive content in messages.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3c1e90e7-cf49-4a8b-a0c4-c189ab8ab166(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3c2ea368-e6c0-41f8-9509-8a54c268e0a3
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-ConnectSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>The New-ConnectSubscription cmdlet allows a user to create contact integration subscriptions between supported services (for example, Facebook or LinkedIn) and their own cloud-based mailbox. An administrator can't use this cmdlet to create subscriptions in another user's mailbox.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>ConnectSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-ConnectSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>AppAuthorizationCode</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Facebook</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>RedirectUri</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>New-ConnectSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>LinkedIn</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>OAuthVerifier</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>RequestSecret</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>RequestToken</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AppAuthorizationCode</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Facebook</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LinkedIn</maml:name>
      <maml:description>
        <maml:para>The LinkedIn parameter specifies whether you want to edit a LinkedIn subscription.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that will contain the subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OAuthVerifier</maml:name>
      <maml:description>
        <maml:para>The OAuthVerifier parameter specifies the verification code associated with the request token. You must provide a value for the OAuthVerifier parameter and the RequestToken parameter values in exchange for an access token.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RedirectUri</maml:name>
      <maml:description>
        <maml:para>The RedirectUri parameter specifies the host name used to connect to the Exchange server from outside the firewall.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequestSecret</maml:name>
      <maml:description>
        <maml:para>The RequestSecret parameter specifies the secret associated with the access token.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequestToken</maml:name>
      <maml:description>
        <maml:para>The RequestToken parameter specifies the access token that provides access to protected resources accessible through LinkedIn. You must provide a value for the OAuthVerifier parameter and the RequestToken parameter values in exchange for an access token.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies a people connection to LinkedIn.</maml:para>
        <maml:para />
        <maml:para>New-ConnectSubscription -LinkedIn $true -OAuthVerifier &lt;OAuthVerifyer value&gt; -RequestSecret &lt;Request Secret value&gt; -RequestToken &lt;Request Token value&gt;</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>When you set up a contact subscription, contacts from the external networking service are integrated into your cloud-based mailbox.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3c2ea368-e6c0-41f8-9509-8a54c268e0a3(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3e007b40-1ef7-4105-ba1b-d2ad33f29cc2
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-ExchangeCertificate</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-ExchangeCertificate cmdlet to remove an existing certificate from the local certificate store.</maml:para>
      <maml:para>There are many factors to consider when you configure certificates for Transport Layer Security (TLS) and Secure Sockets Layer (SSL) services. You must understand how these factors may affect your overall configuration.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>ExchangeCertificate</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-ExchangeCertificate</maml:name>
      <command:parameter required="True">
        <maml:name>Thumbprint</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Remove-ExchangeCertificate</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ExchangeCertificateIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Thumbprint</maml:name>
      <maml:description>
        <maml:para>The Thumbprint parameter specifies the thumbprint of the certificate that you're removing. Each certificate contains a thumbprint, which is the digest of the certificate data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the certificate ID.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExchangeCertificateIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ExchangeCertificateIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the server name from which you want to remove the certificate.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes a certificate with the specified thumbprint.</maml:para>
        <maml:para />
        <maml:para>Remove-ExchangeCertificate -Thumbprint 5113ae0233a72fccb75b1d0198628675333d010e</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can't remove the certificate that's being used. If you want to replace the default certificate for the server with another certificate that has the same fully qualified domain name (FQDN), you must create the new certificate first, and then remove the old certificate.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Certificate management" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3e007b40-1ef7-4105-ba1b-d2ad33f29cc2(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3e07e5cc-5066-40e7-8642-845ad080f9a9
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-OrganizationConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-OrganizationConfig cmdlet to get configuration data for an Exchange organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>OrganizationConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-OrganizationConfig</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-OrganizationConfig</maml:name>
      <command:parameter required="False">
        <maml:name>AccountPartition</maml:name>
        <command:parameterValue required="True">AccountPartitionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AccountPartition</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AccountPartitionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AccountPartitionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the organization you want configuration data from.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example gets the organization configuration information for the domain controller ContosoDC.</maml:para>
        <maml:para />
        <maml:para>Get-OrganizationConfig -DomainController ContosoDC</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example gets the configuration information for the tenant organization.</maml:para>
        <maml:para />
        <maml:para>Get-OrganizationConfig Export-Cli c:\myFile.xml</maml:para>
        <maml:para>For more information, see Troubleshoot a hybrid deployment.</maml:para>
        <maml:para />
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Shell infrastructure permissions" section in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3e07e5cc-5066-40e7-8642-845ad080f9a9(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3e80fb04-531f-4044-b957-9ba4fc712e4b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-OutlookProvider</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-OutlookProvider cmdlet to create the AutoDiscoverConfig object, and then populate the object with relevant settings.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>OutlookProvider</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-OutlookProvider</maml:name>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter provides the common name of the AutoDiscoverConfig object. This can be a user-friendly name for identification.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the AutoDiscoverConfig object MyOABUrl.</maml:para>
        <maml:para />
        <maml:para>New-OutlookProvider -Name MyOABUrl</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the AutoDiscoverConfig object Autodiscover1, and the specified domain controller writes the change to Active Directory.</maml:para>
        <maml:para />
        <maml:para>New-OutlookProvider -DomainController DC1 -Name Autodiscover1</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The New-OutlookProvider cmdlet creates the AutoDiscoverConfig object under the Global Settings object in Active Directory and sets the attributes specified.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Autodiscover service configuration settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3e80fb04-531f-4044-b957-9ba4fc712e4b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>3ec02987-7404-47fa-a6b0-43239344b6c8
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-PopSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-PopSubscription cmdlet to modify the properties of an existing POP subscription that's configured in a user's cloud-based mailbox.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>PopSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-PopSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-PopSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EmailAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnablePoisonSubscription</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingAuth</maml:name>
        <command:parameterValue required="True">Basic | Spa</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingPassword</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingPort</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingSecurity</maml:name>
        <command:parameterValue required="True">None | Ssl | Tls</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingServer</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingUserName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LeaveOnServer</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-PopSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ValidateSecret</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-PopSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResendVerification</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-PopSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisableAsPoison</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the POP subscription. You can identify the subscription by using one of the following methods:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Specify the globally unique identifier of the subscription, which is its canonical name (CN).</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Use the Mailbox parameter to specify the mailbox that contains the subscription, and then specify the name of the subscription.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can find the identifying values for a POP subscription, such as Identity and Name, by running this command: Get-PopSubscription -Mailbox &lt;mailbox&gt;.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisableAsPoison</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplayName</maml:name>
      <maml:description>
        <maml:para>The DisplayName parameter specifies the friendly name of the subscription.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EmailAddress</maml:name>
      <maml:description>
        <maml:para>The EmailAddress parameter specifies the email address of the POP mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether the POP subscription is enabled. This parameter accepts $true or $false values. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnablePoisonSubscription</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force parameter instructs the command to modify the specified subscription settings even if those settings can't be verified by the remote POP server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingAuth</maml:name>
      <maml:description>
        <maml:para>The IncomingAuth parameter sets the authentication method used by POP clients to access the POP server. Valid values are Basic or Spa, which is secure password authentication. If you don't specify a value for the IncomingAuth parameter, the value Basic is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Basic | Spa</command:parameterValue>
      <dev:type>
        <maml:name>Basic | Spa</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingPassword</maml:name>
      <maml:description>
        <maml:para>The IncomingPassword parameter specifies the password used to sign in to the POP mailbox. You must specify the value for this parameter in a secure format, for example, (ConvertTo-SecureString -String '&lt;password&gt;' -AsPlainText -Force).</maml:para>
      </maml:description>
      <command:parameterValue required="True">SecureString</command:parameterValue>
      <dev:type>
        <maml:name>SecureString</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingPort</maml:name>
      <maml:description>
        <maml:para>The Incoming Port parameter specifies the TCP port number used by POP clients to connect to the POP server. Typical values are 110 for unencrypted connections and 995 for encrypted connections. By default, the value of the IncomingPort parameter is set to 110 if you don't set the IncomingSecurity parameter to Ssl or Tls. If you set the IncomingSecurity parameter to Ssl or Tls, the value of the IncomingPort parameter is set to 995. You can override the default values by specifying an integer for the IncomingPort parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingSecurity</maml:name>
      <maml:description>
        <maml:para>The IncomingSecurity parameter specifies the encryption method used by POP clients to connect to the POP server. Valid values are None, Ssl, or Tls. If you don't specify a value for the IncomingSecurity parameter, the value None is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Ssl | Tls</command:parameterValue>
      <dev:type>
        <maml:name>None | Ssl | Tls</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingServer</maml:name>
      <maml:description>
        <maml:para>The IncomingServer parameter specifies the fully qualified domain name (FQDN) of the POP server, for example, incoming.contoso.com.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingUserName</maml:name>
      <maml:description>
        <maml:para>The IncomingUserName parameter specifies the user name used to sign in to the POP mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LeaveOnServer</maml:name>
      <maml:description>
        <maml:para>The LeaveOnServer parameter configures the behavior of retrieved messages in the POP mailbox. When the LeaveOnServer parameter is set to the value $true, the retrieved messages are left in the POP mailbox. When it's set to the value $false, retrieved messages are removed from the POP mailbox. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that contains the POP subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResendVerification</maml:name>
      <maml:description>
        <maml:para>The ResendVerification parameter generates verification data for the POP subscription. This is part of the verification process that allows the user to send messages from their cloud-based mailbox using the From address of the subscribed POP mailbox.</maml:para>
        <maml:para>The ResendVerification parameter can't be specified with any other parameters that modify the settings of the subscription. Also, the ResendVerification and ValidateSecret parameters are mutually exclusive.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ValidateSecret</maml:name>
      <maml:description>
        <maml:para>The ValidateSecret parameter validates verification data for the POP subscription. This is part of the verification process that allows the user to send messages from their cloud-based mailbox using the From address of the subscribed POP mailbox.</maml:para>
        <maml:para>The ValidateSecret parameter can't be specified with any other parameters that modify the settings of the subscription. Also, the ResendVerification and ValidateSecret parameters are mutually exclusive.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the value of the LeaveOnServer parameter for the POP subscription Ayla Contoso that's configured in the cloud-based mailbox of the user Ayla Kol.</maml:para>
        <maml:para />
        <maml:para>Set-PopSubscription "Ayla Contoso" -Mailbox "Ayla Kol" -LeaveOnServer $false</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can set properties for the POP subscription, such as the POP server, TCP port number, encryption method, and authentication method.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/3ec02987-7404-47fa-a6b0-43239344b6c8(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>41c4859f-0a8d-41ff-8074-e3ea7f08df69
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-DeliveryAgentConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>The Remove-DeliveryAgentConnector cmdlet removes a specific delivery agent connector configured in your organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>DeliveryAgentConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-DeliveryAgentConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DeliveryAgentConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the GUID or name of the delivery agent connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DeliveryAgentConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DeliveryAgentConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the delivery agent connector named Contoso Delivery Agent Connector.</maml:para>
        <maml:para />
        <maml:para>Remove-DeliveryAgentConnector "Contoso Delivery Agent Connector"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Delivery agent connectors are used to route messages addressed to foreign systems that don't use the SMTP protocol. When a message is routed to a delivery agent connector, the associated delivery agent performs the content conversion and message delivery. Delivery agent connectors allow queue management of foreign connectors, thereby eliminating the need for storing messages on the file system in Drop and Pickup directories. For more information, see Delivery agents and Delivery Agent connectors.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Delivery agent connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/41c4859f-0a8d-41ff-8074-e3ea7f08df69(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>45e1248f-89c2-467c-8d5d-de1367111e08
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-ThrottlingPolicyAssociation</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-ThrottlingPolicyAssociation cmdlet to view the relationship between objects and their associated throttling policies. The object can be a user with a mailbox, a user without a mailbox, a contact, or a computer account.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>ThrottlingPolicyAssociation</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-ThrottlingPolicyAssociation</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ThrottlingPolicyAssociationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Credential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDefaultScope</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrganizationalUnit</maml:name>
        <command:parameterValue required="True">OrganizationalUnitIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReadFromDomainController</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SortBy</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ThrottlingPolicy</maml:name>
        <command:parameterValue required="True">ThrottlingPolicyIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-ThrottlingPolicyAssociation</maml:name>
      <command:parameter required="False">
        <maml:name>Anr</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Credential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDefaultScope</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrganizationalUnit</maml:name>
        <command:parameterValue required="True">OrganizationalUnitIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ReadFromDomainController</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SortBy</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ThrottlingPolicy</maml:name>
        <command:parameterValue required="True">ThrottlingPolicyIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Anr</maml:name>
      <maml:description>
        <maml:para>The Anr parameter specifies a string on which to perform an ambiguous name resolution (ANR) search. You can specify a partial string and search for objects with an attribute that matches that string. The default attributes searched are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>CommonName (CN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DisplayName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FirstName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LastName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Credential</maml:name>
      <maml:description>
        <maml:para>The Credential parameter specifies the user name and password to use to access Active Directory.</maml:para>
        <maml:para>This parameter requires the creation and passing of a credential object. This credential object is created by using the Get-Credential cmdlet. For more information, see Get-Credential (http://go.microsoft.com/fwlink/p/?linkId=142122).</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">PSCredential</command:parameterValue>
      <dev:type>
        <maml:name>PSCredential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter indicates the OPath filter used to filter recipients.</maml:para>
        <maml:para>For more information about the filterable properties, see Filterable properties for the -Filter parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the object to query to see its throttling policy associations. The object can be a user with a mailbox, a user without a mailbox, a contact, or a computer account.</maml:para>
        <maml:para>This parameter accepts the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
          <maml:para>Example: JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Canonical DN</maml:para>
          <maml:para>Example: Atlanta.Corp.Contoso.Com/Users/JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display Name</maml:para>
          <maml:para>Example: Jeff Phillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished Name (DN)</maml:para>
          <maml:para>Example: CN=JPhillips,CN=Users,DC=Atlanta,DC=Corp,DC=contoso,DC=com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Domain\Account</maml:para>
          <maml:para>Example: Atlanta\JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
          <maml:para>Example: fb456636-fe7d-4d58-9d15-5af57d0354c2</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Immutable ID</maml:para>
          <maml:para>Example: fb456636-fe7d-4d58-9d15-5af57d0354c2@contoso.com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Legacy Exchange DN</maml:para>
          <maml:para>Example: /o=Contoso/ou=AdministrativeGroup/cn=Recipients/cn=JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SMTP Address</maml:para>
          <maml:para>Example: Jeff.Phillips@contoso.com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User Principal Name</maml:para>
          <maml:para>Example: JPhillips@contoso.com</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">ThrottlingPolicyAssociationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ThrottlingPolicyAssociationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDefaultScope</maml:name>
      <maml:description>
        <maml:para>The IgnoreDefaultScope parameter instructs the command to ignore the default recipient scope setting for the Exchange Management Shell session and use the entire forest as the scope. This allows the command to access Active Directory objects that aren't currently in the default scope. Using the IgnoreDefaultScope parameter introduces the following restrictions:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>You can only use the distinguished name (DN) for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>You can't use the OrganizationalUnit and Identity parameters together.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>You can't use the Credential parameter.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter specifies the organization that the object specified by the Identity parameter is in.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OrganizationalUnit</maml:name>
      <maml:description>
        <maml:para>The OrganizationalUnit parameter specifies an organizational unit (OU) and is used to limit the results. If you use this parameter, you only get mailboxes in the container that you specify. You can use either the OU or the domain name. If you use the OU, you must specify the canonical name of the OU.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationalUnitIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationalUnitIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ReadFromDomainController</maml:name>
      <maml:description>
        <maml:para>The ReadFromDomainController parameter specifies that the user information is read from a domain controller in the user's domain. If you set the recipient scope to include all recipients in the forest and don't use this parameter, it's possible that the user information is read from a global catalog with outdated information. If you use this parameter, multiple reads might be necessary to get the information.</maml:para>
        <maml:para>By default, the recipient scope is set to the domain that hosts your servers that run Exchange.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the maximum number of results to return. If you want to return all mailboxes that match the query, use unlimited for the value of this parameter. The default value is 1000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SortBy</maml:name>
      <maml:description>
        <maml:para>The SortBy parameter specifies the attribute by which to sort the results. You can sort by only one attribute at a time. You can sort by the following attributes:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem></command:list>
        <maml:para>The results are sorted in ascending order.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ThrottlingPolicy</maml:name>
      <maml:description>
        <maml:para>The ThrottlingPolicy parameter specifies the identity of the throttling policy for which you want to view throttling policy associations.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ThrottlingPolicyIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ThrottlingPolicyIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a list of all the mailboxes in your organization in the Users OU.</maml:para>
        <maml:para />
        <maml:para>Get-ThrottlingPolicyAssociation -OrganizationalUnit Users</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns all the mailboxes that resolve from the ambiguous name resolution search on the string "Chr" that are in the domain DC01. This example returns mailboxes for users such as Chris Ashton, Christian Hess, and Christa Geller.</maml:para>
        <maml:para />
        <maml:para>Get-ThrottlingPolicyAssociation -Anr Chr -DomainController DC01</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>For more information about how to control the resources consumed by individual users, see Exchange workload management.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "User throttling" entry in the Server health and performance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/45e1248f-89c2-467c-8d5d-de1367111e08(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>4637f6b8-751a-4f5e-8869-428250230382
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-RMSTemplate</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-RMSTemplate cmdlet to modify the properties of an existing Rights Management Services (RMS) template in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>RMSTemplate</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-RMSTemplate</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RmsTemplateIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Type</maml:name>
        <command:parameterValue required="True">Archived | Distributed | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the RMS template. You can use any value that uniquely identifies the RMS template, for example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem></command:list>
        <maml:para>You can use the Get-RMSTemplate cmdlet to view the RMS templates in your organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RmsTemplateIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RmsTemplateIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Type</maml:name>
      <maml:description>
        <maml:para>The Type parameter specifies the type of RMS template. You can specify one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Archived</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distributed</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>All</maml:para>
        </command:listItem></command:list>
        <maml:para>The default type for imported RMS templates is Archived.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Archived | Distributed | All</command:parameterValue>
      <dev:type>
        <maml:name>Archived | Distributed | All</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example changes the RMS template Contoso Confidential from Distributed to Archived. This prevents future use of Contoso Confidential for encryption, but allows access to existing content that's rights-protected by Contoso Confidential.</maml:para>
        <maml:para />
        <maml:para>Set-RMSTemplate "Contoso Confidential" -Type Archived</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>RMS templates exist in one or more trusted publishing domains (TPDs) that have been imported from an on-premises server running Active Directory Rights Management Services (AD RMS).</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/4637f6b8-751a-4f5e-8869-428250230382(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>4738bf25-39b8-4433-bd64-1d60252c2832
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-RemoteDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-RemoteDomain cmdlet to configure a managed connection for a remote domain.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>RemoteDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-RemoteDomain</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RemoteDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AllowedOOFType</maml:name>
        <command:parameterValue required="True">External | InternalLegacy | ExternalLegacy | None</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AutoForwardEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AutoReplyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ByteEncoderTypeFor7BitCharsets</maml:name>
        <command:parameterValue required="True">Use7Bit | UseQP | UseBase64 | UseQPHtmlDetectTextPlain | UseBase64HtmlDetectTextPlain | UseQPHtml7BitTextPlain | UseBase64Html7BitTextPlain | Undefined</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CharacterSet</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ContentType</maml:name>
        <command:parameterValue required="True">MimeHtmlText | MimeText | MimeHtml</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeliveryReportEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisplaySenderName</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsInternal</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LineWrapSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MeetingForwardNotificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageCountThreshold</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>NDRDiagnosticInfoEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>NDREnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>NonMimeCharacterSet</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PreferredInternetCodePageForShiftJis</maml:name>
        <command:parameterValue required="True">Undefined | Iso2022Jp | Esc2022Jp | Sio2022Jp</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequiredCharsetCoverage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TargetDeliveryDomain</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TNEFEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TrustedMailInboundEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TrustedMailOutboundEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UseSimpleDisplayName</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the display name of the remote domain.</maml:para>
        <maml:para>The length of the name can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RemoteDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RemoteDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AllowedOOFType</maml:name>
      <maml:description>
        <maml:para>The AllowedOOFType parameter specifies the type of out-of-office notification returned to users at the remote domain. Valid values are External, ExternalLegacy, None, and InternalLegacy. The default value is External.</maml:para>
      </maml:description>
      <command:parameterValue required="True">External | InternalLegacy | ExternalLegacy | None</command:parameterValue>
      <dev:type>
        <maml:name>External | InternalLegacy | ExternalLegacy | None</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AutoForwardEnabled</maml:name>
      <maml:description>
        <maml:para>The AutoForwardEnabled parameter specifies whether to allow messages that are auto-forwarded by client e-mail programs in your organization. Setting this parameter to $true enables auto-forwarded messages to be delivered to the remote domain. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AutoReplyEnabled</maml:name>
      <maml:description>
        <maml:para>The AutoReplyEnabled parameter specifies whether to allow messages that are automatic replies from client e-mail programs in your organization. Setting this parameter to $true enables automatic replies to be delivered to the remote domain. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ByteEncoderTypeFor7BitCharsets</maml:name>
      <maml:description>
        <maml:para>The ByteEncoderTypeFor7BitCharsets parameter specifies the 7-bit transfer encoding method for MIME format for messages sent to this remote domain. The valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Use7Bit Always use default 7-bit transfer encoding for HTML and plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UseQP Always use QP (quoted-printable) encoding for HTML and for plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UseBase64 Always use Base64 encoding for HTML and for plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UseQPHtmlDetectTextPlain Use QP encoding for HTML and for plain text unless line wrapping is enabled in plain text. If line wrapping is enabled, use 7-bit encoding for plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UseBase64HtmlDetectTextPlain Use Base64 encoding for HTML and for plain text, unless line wrapping is enabled in plain text. If line wrapping is enabled in plain text, use Base64 encoding for HTML, and use 7-bit encoding for plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UseQPHtml7BitTextPlain Always use QP encoding for HTML. Always use 7-bit encoding for plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UseBase64Html7BitTextPlain Always use Base64 encoding for HTML. Always use 7-bit encoding for plain text.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Undefined Always use QP encoding for HTML and plain text.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is Undefined.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Use7Bit | UseQP | UseBase64 | UseQPHtmlDetectTextPlain | UseBase64HtmlDetectTextPlain | UseQPHtml7BitTextPlain | UseBase64Html7BitTextPlain | Undefined</command:parameterValue>
      <dev:type>
        <maml:name>Use7Bit | UseQP | UseBase64 | UseQPHtmlDetectTextPlain | UseBase64HtmlDetectTextPlain | UseQPHtml7BitTextPlain | UseBase64Html7BitTextPlain | Undefined</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CharacterSet</maml:name>
      <maml:description>
        <maml:para>The CharacterSet parameter specifies a character set for this remote domain. The character set that you specify is only used for MIME messages that don't have their own character set specified. Setting this parameter doesn't overwrite character sets already specified in the outbound mail. To remove the character set value, set the value to $null.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ContentType</maml:name>
      <maml:description>
        <maml:para>The ContentType parameter specifies the outbound message content type and formatting. Valid values for this parameter are MimeHtmlText, MimeText, or MimeHtml:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>MimeHtmlText converts messages to MIME messages that use HTML formatting, unless the original message is a text message. If the original message is a text message, the outbound message is a MIME message that uses text formatting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MimeText converts all messages to MIME messages that use text formatting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MimeHtml converts all messages to MIME messages that use HTML formatting.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is MimeHtmlText.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MimeHtmlText | MimeText | MimeHtml</command:parameterValue>
      <dev:type>
        <maml:name>MimeHtmlText | MimeText | MimeHtml</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeliveryReportEnabled</maml:name>
      <maml:description>
        <maml:para>The DeliveryReportEnabled parameter specifies whether to allow delivery reports from client software in your organization to the remote domain. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplaySenderName</maml:name>
      <maml:description>
        <maml:para>The DisplaySenderName parameter specifies whether to display the sender name. Valid values for this parameter are $true or $false. The default value is $true. This parameter is used for older versions of Exchange and should only be set under the direction of Microsoft Customer Service and Support.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsInternal</maml:name>
      <maml:description>
        <maml:para>The IsInternal parameter specifies whether the recipients in this remote domain should be considered internal recipients. Set this parameter to $true if this remote domain is part of your cross-premises deployment.</maml:para>
        <maml:para>When you set this parameter to $true, all transport components, like transport rules or any agents you may have deployed, treat this remote domain as an internal domain.</maml:para>
        <maml:para>The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LineWrapSize</maml:name>
      <maml:description>
        <maml:para>The LineWrapSize parameter specifies the line-wrap size for outbound messages. The parameter takes an integer from 0 through 132, or you can overload the parameter by setting the value to unlimited. The default value is unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MeetingForwardNotificationEnabled</maml:name>
      <maml:description>
        <maml:para>The MeetingForwardNotificationEnabled parameter specifies whether to enable meeting forward notifications. When this parameter is enabled, meeting requests forwarded to recipients in the remote domain generate a meeting forward notification to the meeting organizer. When this parameter is disabled, meeting requests forwarded to recipients in the remote domain won't generate a meeting forward notification to the meeting organizer.</maml:para>
        <maml:para>Valid values for this parameter are $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageCountThreshold</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MessageCountThreshold parameter specifies the acceptable message count for the remote domain. If the message count exceeds this value, an event is generated that's visible using the Get-ServerHealth and Get-HealthReport cmdlets.</maml:para>
        <maml:para>Valid input for this parameter is an integer. The default value is Int32 (2147483647). The default value indicates there is no message count threshold defined, and that the message count to the remote domain is unmonitored.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the remote domain object.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>NDRDiagnosticInfoEnabled</maml:name>
      <maml:description>
        <maml:para>The NDRDiagnosticInfoEnabled parameter specifies whether the diagnostic information is included in NDRs sent to the remote domain.</maml:para>
        <maml:para>The diagnostic information of an NDR includes details that help administrators troubleshoot delivery problems. This detailed information includes internal server names. You may not want to expose this information to NDRs sent to external users. If you set this parameter to $false, the diagnostic information section in the NDR body as well as internal server headers from the attached original message headers are removed from the NDR.</maml:para>
        <maml:para>The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>NDREnabled</maml:name>
      <maml:description>
        <maml:para>The NDREnabled parameter specifies whether to allow non-delivery reports (NDRs) from your organization. Setting this parameter to $false suppresses NDRs to the remote domain. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>NonMimeCharacterSet</maml:name>
      <maml:description>
        <maml:para>The NonMimeCharacterSet parameter specifies a character set for this remote domain. The character set that you specify is only used for non-MIME (RFC 822 text) messages that don't have their own character set specified. Setting this parameter doesn't overwrite character sets already specified in the outbound mail. To remove the character set value, set the value to $null.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PreferredInternetCodePageForShiftJis</maml:name>
      <maml:description>
        <maml:para>The PreferredInternetCodePageForShiftJis parameter specifies the specific code page to use for Shift JIS character encoding when sending messages to this remote domain. The valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>50220: Use ISO-2022-JP codepage.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>50221: Use ESC-2022-JP codepage.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>50222: Use SIO-2022-JP codepage.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Undefined | Iso2022Jp | Esc2022Jp | Sio2022Jp</command:parameterValue>
      <dev:type>
        <maml:name>Undefined | Iso2022Jp | Esc2022Jp | Sio2022Jp</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequiredCharsetCoverage</maml:name>
      <maml:description>
        <maml:para>The RequiredCharsetCoverage parameter specifies a percentage threshold for characters in a message that must match to apply your organization's preferred character set before switching to automatic character set detection.</maml:para>
        <maml:para>For example, if you set this parameter to 60, the preferred character sets will still be used during content conversion for messages that contain characters from non-preferred character sets as long as the percentage of those characters is 40 percent or less. If the percentage of characters in a message doesn't belong to preferred character sets, Exchange analyzes the UNICODE characters and automatically determines the best matching character set to use.</maml:para>
        <maml:para>If users in this remote domain use characters that span character sets, you may want to specify a lower percentage to ensure that your organization's preferred character set is used during content conversion.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetDeliveryDomain</maml:name>
      <maml:description>
        <maml:para>The TargetDeliveryDomain parameter specifies the e-mail domain that's used when generating target addresses for new mail users in a cross-premises deployment scenario. When you have a cross-premises deployment, the user mailboxes on the remote location are represented as mail user objects. For example, all mailboxes hosted on Exchange Online are represented as mail users in your on-premises organization. The value of this parameter is used to determine what domain should be used for the target e-mail address for these mail users.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TNEFEnabled</maml:name>
      <maml:description>
        <maml:para>The TNEFEnabled parameter specifies whether Transport Neutral Encapsulation Format (TNEF) message encoding is used on messages sent to the remote domain. Valid values for this parameter are $true, $false, or $null. The action associated with each value is as follows:</maml:para>
        <maml:para>$true TNEF encoding is used on all messages sent to the remote domain.</maml:para>
        <maml:para>$false TNEF encoding isn't used on any messages sent to the remote domain.</maml:para>
        <maml:para>$null TNEF encoding isn't specified for the remote domain. TNEF encoding for recipients in the remote domain may be specified by the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Value of the UseMapiRichTextFormat parameter for any mail user or mail contact objects</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Sender's per-recipient settings in Microsoft Outlook</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Sender's default Internet message settings in Outlook</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is $null.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TrustedMailInboundEnabled</maml:name>
      <maml:description>
        <maml:para>The TrustedMailInboundEnabled parameter specifies whether Exchange will treat e-mail received from this remote domain as trusted messages. If you set this parameter to $true, all incoming messages from this remote domain are considered safe and they will bypass content and recipient filtering.</maml:para>
        <maml:para>We recommend that you set this parameter to $true for cross-premises deployment scenarios.</maml:para>
        <maml:para>The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TrustedMailOutboundEnabled</maml:name>
      <maml:description>
        <maml:para>The TrustedMailOutboundEnabled parameter specifies whether the remote domain is considered a trusted domain. We recommend that you set this parameter to $true for cross-premises deployment scenarios.</maml:para>
        <maml:para>The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UseSimpleDisplayName</maml:name>
      <maml:description>
        <maml:para>The UseSimpleDisplayName parameter specifies whether simple display names for senders appear in messages sent to this domain. Setting this parameter to $true enables simple display names for this remote domain. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example performs the following actions:</maml:para>
        <maml:para />
        <maml:para>It disables out-of-office notifications to the remote domain.</maml:para>
        <maml:para>It suppresses read receipts sent from clients in your organization to the remote domain.</maml:para>
        <maml:para>It enables TNEF message data on messages sent to the remote domain.</maml:para>
        <maml:para>Set-RemoteDomain Contoso -AllowedOOFType None -DeliveryReportEnabled $false -TNEFEnabled $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example queries Active Directory for all remote domains for which auto replies are disabled. Using the pipelining feature, it also disables auto forwards and NDRs to those domains.</maml:para>
        <maml:para />
        <maml:para>Get-RemoteDomain | Where {$_.AutoReplyEnabled -eq $false} | Set-RemoteDomain -AutoForwardEnabled $false -NDREnabled $false</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>When you set a remote domain, you can control mail flow with more precision, specify message formatting and policy, and specify acceptable character sets for messages sent to or received from the remote domain.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Remote domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/4738bf25-39b8-4433-bd64-1d60252c2832(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>4a7df5b7-6380-4c2d-9a35-8d310bb6801d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-OutlookProtectionRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Remove-OutlookProtectionRule cmdlet to remove an Outlook protection rule.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>OutlookProtectionRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-OutlookProtectionRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the rule being removed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the Outlook protection rule Project Contoso.</maml:para>
        <maml:para />
        <maml:para>Remove-OutlookProtectionRule -Identity "Project Contoso"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes all Outlook protection rules in the organization. The Get-OutlookProtectionRule cmdlet is used to retrieve all Outlook protection rules in the Microsoft Exchange Server 2013 organization, and the results are pipelined to the Remove-OutlookProtectionRule cmdlet to remove them.</maml:para>
        <maml:para />
        <maml:para>Get-OutlookProtectionRule | Remove-OutlookProtectionRule</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Outlook protection rules use an Active Directory Rights Management Services (AD RMS) rights template to automatically apply Information Rights Management (IRM) protection to messages before they're sent. For more information, see Outlook protection rules.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Information Rights Management (IRM) configuration" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/4a7df5b7-6380-4c2d-9a35-8d310bb6801d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>52a9908f-1814-4a64-ba74-a6fdcaf0d1a1
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-DataClassification</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Remove-DataClassification cmdlet to remove data classification rules that use document fingerprints. You can't use this cmdlet to remove built-in data classification rules.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>DataClassification</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-DataClassification</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DataClassificationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the data classification rule that you want to remove. You can use any value that uniquely identifies the data classification rule. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LocalizedName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Identity GUID value</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">DataClassificationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DataClassificationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the data classification rule named "Contoso Confidential".</maml:para>
        <maml:para />
        <maml:para>Remove-DataClassification "Contoso Confidential"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Classification rule packages are used by data loss prevention (DLP) to detect sensitive content in messages.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/52a9908f-1814-4a64-ba74-a6fdcaf0d1a1(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>531fc365-3b67-4fd8-abd2-d9795c82decb
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-AuthRedirect</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-AuthRedirect cmdlet to view OAuth redirection settings for Microsoft Exchange 2010 Client Access servers in your Microsoft Exchange 2013 organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>AuthRedirect</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-AuthRedirect</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AuthRedirectIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the existing OAuth redirection object that you want to view. The object name uses the syntax AuthRedirect-Bearer-&lt;GUID&gt;.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AuthRedirectIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AuthRedirectIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows a summary list of all the OAuth redirection objects.</maml:para>
        <maml:para />
        <maml:para>Get-AuthRedirect</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves details about the OAuth redirection object named AuthRedirect-Bearer-C0B7AC3F-FE64-4B4B-A907-9226F8027CCE</maml:para>
        <maml:para />
        <maml:para>Get-AuthRedirect AuthRedirect-Bearer-C0B7AC3F-FE64-4B4B-A907-9226F8027CCE | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "OAuth authentication redirection settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/531fc365-3b67-4fd8-abd2-d9795c82decb(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>55878738-7045-4a38-87fe-2ecd01f8303a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-OutlookProtectionRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-OutlookProtectionRule cmdlet to modify an existing Microsoft Outlook protection rule.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>OutlookProtectionRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-OutlookProtectionRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ApplyRightsProtectionTemplate</maml:name>
        <command:parameterValue required="True">RmsTemplateIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromDepartment</maml:name>
        <command:parameterValue required="True">String[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Priority</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentTo</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentToScope</maml:name>
        <command:parameterValue required="True">All | InOrganization</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UserCanOverride</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>ApplyRightsProtectionTemplate</maml:name>
      <maml:description>
        <maml:para>The ApplyRightsProtectionTemplate parameter specifies an RMS template to be applied to messages matching the conditions.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RmsTemplateIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RmsTemplateIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress the confirmation prompt produced by the cmdlet when modifying a rule with no conditions, resulting in such rules being applied to all messages.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromDepartment</maml:name>
      <maml:description>
        <maml:para>The FromDepartment parameter specifies a department name. The rule is applied to messages where the sender's department attribute matches this value.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String[]</command:parameterValue>
      <dev:type>
        <maml:name>String[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a name for the rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Priority</maml:name>
      <maml:description>
        <maml:para>The Priority parameter specifies a priority for the Outlook protection rule. Rule priority values can range from 0 through n-1, where n is the total number of existing Outlook protection rules.</maml:para>
        <maml:para>Any existing rules with priority equal to or higher than the priority being set have their priority incremented by 1.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentTo</maml:name>
      <maml:description>
        <maml:para>The SentTo parameter specifies one or more recipients. External recipients can be specified using the SMTP address.</maml:para>
        <maml:para>Internal recipients can be specified using any of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ExchangeGUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SmtpAddress</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User principal name (UPN)</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentToScope</maml:name>
      <maml:description>
        <maml:para>The SentToScope parameter specifies the scope of messages to which the rule applies. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>All Applies to all messages.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>InOrganization Applies to messages originating from inside the Exchange organization, where all recipients are also internal.</maml:para>
        </command:listItem></command:list>
        <maml:para>If not specified, the parameter defaults to All.</maml:para>
      </maml:description>
      <command:parameterValue required="True">All | InOrganization</command:parameterValue>
      <dev:type>
        <maml:name>All | InOrganization</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UserCanOverride</maml:name>
      <maml:description>
        <maml:para>The UserCanOverride parameter specifies whether the Outlook user can override the rule behavior, either by using a different RMS template, or by removing rights protection before sending the message. Valid values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>$true User can override rule action.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>$false User can't override rule action.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the Outlook protection rule OPR-DG-Finance to apply to messages sent to the DG-Finance distribution group.</maml:para>
        <maml:para />
        <maml:para>Set-OutlookProtectionRule -Identity "OPR-DG-Finance" -SentTo "DG-Finance"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the priority of the Outlook protection rule OPR-DG-Finance to 2.</maml:para>
        <maml:para />
        <maml:para>Set-OutlookProtectionRule -Identity "OPR-DG-Finance" -Priority 2</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Outlook protection rules are used to automatically rights-protect email messages using a Rights Management Services (RMS) template before the message is sent. However, Outlook protection rules don't inspect message content. To rights-protect messages based on message content, use transport protection rules. For more information, see Outlook protection rules.</maml:para>
    <maml:para>Not specifying any conditions results in an Outlook protection rule being applied to all messages.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Information Rights Management (IRM) configuration" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/55878738-7045-4a38-87fe-2ecd01f8303a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>58e51734-83bd-4e71-bd13-9960efaa80c3
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-ImapSettings</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-ImapSettings cmdlet to set specific IMAP4 settings for the server running Microsoft Exchange Server 2013 that has the Client Access server role installed and that's running the Microsoft Exchange IMAP4 service.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>ImapSettings</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-ImapSettings</maml:name>
      <command:parameter required="False">
        <maml:name>AuthenticatedConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Banner</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CalendarItemRetrievalOption</maml:name>
        <command:parameterValue required="True">iCalendar | intranetUrl | InternetUrl | Custom</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableExactRFC822Size</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableGSSAPIAndNTLMAuth</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnforceCertificateErrors</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionPolicy</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalConnectionSettings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalConnectionSettings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveIdBasicAuthReplacement</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogFileLocation</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogFileRollOverSettings</maml:name>
        <command:parameterValue required="True">Hourly | Daily | Weekly | Monthly</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LoginType</maml:name>
        <command:parameterValue required="True">PlainTextLogin | PlainTextAuthentication | SecureLogin</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogPerFileSizeQuota</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxCommandSize</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConnectionFromSingleIP</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConnections</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConnectionsPerUser</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRetrievalMimeFormat</maml:name>
        <command:parameterValue required="True">TextOnly | HtmlOnly | HtmlAndTextAlternative | TextEnrichedOnly | TextEnrichedAndTextAlternative | BestBodyFormat | Tnef</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OwaServerUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PreAuthenticatedConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProtocolLogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProxyTargetPort</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowHiddenFoldersEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SSLBindings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SuppressReadReceipt</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UnencryptedOrTLSBindings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>X509CertificateName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AuthenticatedConnectionTimeout</maml:name>
      <maml:description>
        <maml:para>The AuthenticatedConnectionTimeout parameter specifies the period of time to wait before closing an idle authenticated connection.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Valid input for this parameter is 00:00:30 to 1:00:00. The default setting is 00:30:00 or 30 minutes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Banner</maml:name>
      <maml:description>
        <maml:para>The Banner parameter specifies the banner string displayed after a connection to a Client Access server has been established.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CalendarItemRetrievalOption</maml:name>
      <maml:description>
        <maml:para>The CalendarItemRetrievalOption parameter specifies the type of calendar item returned when the calendar is accessed by using IMAP4. The default value is iCalendar. You can specify the value for this parameter by using a numerical value or text string. The following values are available:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>0 or iCalendar</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>1 or intranetUrl</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>2 or InternetUrl</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>3 or Custom</maml:para>
        </command:listItem></command:list>
        <maml:para>If you're using 3 or Custom, you must specify the OwaServerUrl parameter setting.</maml:para>
      </maml:description>
      <command:parameterValue required="True">iCalendar | intranetUrl | InternetUrl | Custom</command:parameterValue>
      <dev:type>
        <maml:name>iCalendar | intranetUrl | InternetUrl | Custom</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableExactRFC822Size</maml:name>
      <maml:description>
        <maml:para>The EnableExactRFC822Size parameter calculates the exact size of each MIME message that can be retrieved from the server. When you set this parameter to $true, the exact size of MIME messages stored on the Exchange server is available to POP3 or IMAP4 client programs that rely on knowing the exact size of each MIME message.</maml:para>
        <maml:para>This parameter is set to $false by default. If you don't set this option to $true, the size of each MIME message that the Exchange server returns to POP3 and IMAP4 client programs may be slightly different than the exact size of the message. Because setting this option to $true can negatively affect performance, you should only use this option if many of your users are using a client that requires knowing the exact size of MIME messages.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableGSSAPIAndNTLMAuth</maml:name>
      <maml:description>
        <maml:para>The EnableGSSAPIAndNTLMAuth parameter specifies whether connections can use Integrated Windows authentication (NTLM) using the Generic Security Services application programming interface (GSSAPI). This setting applies to connections where Transport Layer Security (TLS) is disabled. This parameter is set to $true by default. You can disable NTLM for IMAP4 connections by setting the parameter value to $false. NTLM authentication isn't supported for IMAP4 connections in Microsoft Exchange Server 2010 release to manufacturing (RTM). Support for NTLM authentication for IMAP4 connections was brought back in Exchange 2010 Service Pack 1 (SP1).</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnforceCertificateErrors</maml:name>
      <maml:description>
        <maml:para>The EnforceCertificateErrors parameter specifies whether to enforce valid Secure Sockets Layer (SSL) certificates. To use this parameter, specify the destination Client Access server for which you want to enforce valid SSL certificates. If the EnforceCertificateErrors parameter is set to $true and the proxy's target certificate isn't valid, the proxy logon attempt fails.</maml:para>
        <maml:para>The default setting is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionPolicy</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionPolicy parameter specifies how you want to use Extended Protection for Authentication for IMAP4 connections. By default, this parameter is set to None. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Extended Protection for Authentication won't be used.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Allow Extended Protection for Authentication will be used only if the connecting IMAP4 connection supports it. Otherwise, the connections will be established without Extended Protection for Authentication.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Require Extended Protection for Authentication will be required for all IMAP4 connections. If the connecting host doesn't support Extended Protection for Authentication, the connection will be rejected.</maml:para>
        </command:listItem></command:list>
        <maml:para>Extended Protection for Authentication enhances the protection and handling of credentials when authenticating network connections using Integrated Windows authentication. Integrated Windows authentication is also known as NTLM. We strongly recommend that you use Extended Protection for Authentication if you're using Integrated Windows authentication. To use Extended Protection for Authentication, the client and server computers must meet specific requirements. These include operating system requirements and security update requirements. In addition, the IMAP4 client program must support the use of Extended Protection for Authentication.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      <dev:type>
        <maml:name>None | Allow | Require</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalConnectionSettings</maml:name>
      <maml:description>
        <maml:para>The ExternalConnectionSettings parameter specifies the host name, port, and encryption type that Exchange uses when IMAP4 clients connect to their email from outside the corporate network.</maml:para>
        <maml:para>Enter a value using the format: &lt;HostName&gt;:&lt;Port&gt;:&lt;Encryption Type&gt;. The &lt;Encryption Type&gt; part of the multivalued value is optional. Valid values for &lt;Encryption Type&gt; are either TLS (Transport Layer Security) or SSL.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalConnectionSettings</maml:name>
      <maml:description>
        <maml:para>The InternalConnectionSettings parameter specifies the host name, port, and encryption type used when IMAP4 clients connect to their email from inside the corporate network. This setting is also used to specify the host name, port, and encryption type used when a user connection is forwarded to another Client Access server.</maml:para>
        <maml:para>Enter a value using the format: &lt;HostName&gt;:&lt;Port&gt;: &lt;Encryption Type&gt;. The &lt;Encryption Type&gt; part of the multivalued value is optional. Valid values for &lt;Encryption Type&gt; are either TLS or SSL. If the server name is Server01 and the domain is Contoso.com, the default value is Server01.Contoso.com:993:SSL, Server01.Contoso.com:143:TLS.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LiveIdBasicAuthReplacement</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogFileLocation</maml:name>
      <maml:description>
        <maml:para>The LogFileLocation parameter specifies the location for the IMAP4 protocol log files. By default, IMAP4 protocol log files are located in the C:\Program Files\Microsoft\Exchange Server\V15\Logging\Imap4 directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogFileRollOverSettings</maml:name>
      <maml:description>
        <maml:para>The LogFileRollOverSettings parameter specifies how frequently IMAP4 protocol logging creates a new log file. By default, a new log file is created daily. You can specify the value for this parameter by using a numerical value or text string. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>1 or Hourly</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>2 or Daily</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>3 or Weekly</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>4 or Monthly</maml:para>
        </command:listItem></command:list>
        <maml:para>This setting only applies when the value for the LogPerFileSizeQuota parameter is set to 0.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Hourly | Daily | Weekly | Monthly</command:parameterValue>
      <dev:type>
        <maml:name>Hourly | Daily | Weekly | Monthly</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LoginType</maml:name>
      <maml:description>
        <maml:para>The LoginType parameter specifies the authentication setting used for the Client Access server running the Microsoft Exchange IMAP4 service. The default value is SecureLogin. You can specify the value for this parameter by using a numerical value or text string. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>1 or PlainTextLogin</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>2 or PlainTextAuthentication</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>3 or SecureLogin</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">PlainTextLogin | PlainTextAuthentication | SecureLogin</command:parameterValue>
      <dev:type>
        <maml:name>PlainTextLogin | PlainTextAuthentication | SecureLogin</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogPerFileSizeQuota</maml:name>
      <maml:description>
        <maml:para>The LogPerFileSizeQuota parameter specifies the maximum size of an IMAP4 protocol log file in bytes. By default, this value is set to 0. When this value is set to 0, a new protocol log file is created at the frequency specified by the LogFileRollOverSettings parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxCommandSize</maml:name>
      <maml:description>
        <maml:para>The MaxCommandSize parameter specifies the maximum size of a single command. The default size is 10240 bytes. The possible values are from 1024 through 16384 bytes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConnectionFromSingleIP</maml:name>
      <maml:description>
        <maml:para>The MaxConnectionFromSingleIP parameter specifies the number of connections that the specified server accepts from a single IP address. The default value is 2147483647. The possible values are from 1 through 2147483647.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConnections</maml:name>
      <maml:description>
        <maml:para>The MaxConnections parameter specifies the total number of connections that the specified server accepts. This includes authenticated and unauthenticated connections. The default value is 2147483647. The possible values are from 1 through 2147483647.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConnectionsPerUser</maml:name>
      <maml:description>
        <maml:para>The MaxConnectionsPerUser parameter specifies the maximum number of connections that the Client Access server accepts from a particular user. The default value is 16. The possible values are from 1 through 2147483647.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageRetrievalMimeFormat</maml:name>
      <maml:description>
        <maml:para>The MessageRetrievalMimeFormat parameter specifies the format of the messages retrieved from the server. The default value is BestBodyFormat. You can specify the value for this parameter by using a numerical value or text string. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>0 or TextOnly</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>1 or HtmlOnly</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>2 or HtmlAndTextAlternative</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>3 or TextEnrichedOnly</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>4 or TextEnrichedAndTextAlternative</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>5 or BestBodyFormat</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>6 or Tnef</maml:para>
        </command:listItem></command:list>
        <maml:para>For more information, see Configure POP3 and IMAP4 message retrieval format options.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TextOnly | HtmlOnly | HtmlAndTextAlternative | TextEnrichedOnly | TextEnrichedAndTextAlternative | BestBodyFormat | Tnef</command:parameterValue>
      <dev:type>
        <maml:name>TextOnly | HtmlOnly | HtmlAndTextAlternative | TextEnrichedOnly | TextEnrichedAndTextAlternative | BestBodyFormat | Tnef</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OwaServerUrl</maml:name>
      <maml:description>
        <maml:para>The OwaServerUrl parameter specifies the Client Access server from which to retrieve calendar information for instances of custom Microsoft Office Outlook Web App calendar items.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PreAuthenticatedConnectionTimeout</maml:name>
      <maml:description>
        <maml:para>The PreAuthenticatedConnectionTimeout parameter specifies the period of time to wait before closing an idle connection that isn't authenticated.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Valid input for this parameter is 00:00:30 to 1:00:00.The default value is 00:01:00 or one minute.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProtocolLogEnabled</maml:name>
      <maml:description>
        <maml:para>The ProtocolLogEnabled parameter specifies whether to enable protocol logging. For more information, see Configure protocol logging for POP3 and IMAP4.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProxyTargetPort</maml:name>
      <maml:description>
        <maml:para>The ProxyTargetPort parameter specifies the port on the Exchange Server 2003 back-end server to which the Microsoft Exchange IMAP4 service on a Client Access server relays commands. The default port is 9933.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies an individual Client Access server in your organization for which you're specifying IMAP4 settings.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShowHiddenFoldersEnabled</maml:name>
      <maml:description>
        <maml:para>The ShowHiddenFoldersEnabled parameter specifies whether hidden folders are visible. If the value is set to $true, hidden folders are visible. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SSLBindings</maml:name>
      <maml:description>
        <maml:para>The SSLBindings parameter specifies whether the command sets the IP address and port number to use for communication for an SSL session. This is a multivalued property. Enter a value using the format: &lt;IP address&gt;:&lt;Port number&gt;. The default value is 0.0.0.0:993.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SuppressReadReceipt</maml:name>
      <maml:description>
        <maml:para>The SuppressReadReceipt parameter specifies whether to stop duplicate read receipts from being sent to IMAP4 senders that are using the Send read receipts for messages I send option in their IMAP4 email program. By default, this option is set to $false. By default, IMAP4 senders that use the Send read receipts for messages I send option receive a read receipt in both of the following circumstances:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>When messages they send are downloaded by the recipient.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>When the recipient opens the message.</maml:para>
        </command:listItem></command:list>
        <maml:para>The following are valid values and descriptions for this parameter:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>$false IMAP4 users are sent a read receipt each time a recipient downloads a message. IMAP4 users are also sent a read receipt when the user opens the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>$true IMAP4 users that use the Send read receipts for messages I send option in their email client programs only receive a read receipt when the recipient opens the message.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UnencryptedOrTLSBindings</maml:name>
      <maml:description>
        <maml:para>The UnencryptedOrTLSBindings parameter specifies the IP address and port number for communication over the TLS-encrypted connection or the connection that isn't encrypted. This is a multivalued property. Enter a value using the format: &lt;IP address&gt;:&lt;Port number&gt;. The default value is 0.0.0.0:143.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>X509CertificateName</maml:name>
      <maml:description>
        <maml:para>The X509CertificateName parameter specifies the host name in the SSL certificate from the Associated Subject field. This is a multivalued property that contains both the IP address and the port setting. Enter a value using the format: &lt;IP address&gt;:&lt;Port number&gt;.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the plain text or TLS connection to the Client Access server CAS01. In this example, the connection uses an IP address of 10.0.0.0 and a port number of 995.</maml:para>
        <maml:para />
        <maml:para>Set-ImapSettings -Server "CAS01" -UnencryptedOrTLSBindings 10.0.0.0:995</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example turns on IMAP4 protocol logging. It also changes the IMAP4 protocol logging directory to C:\Imap4Logging.</maml:para>
        <maml:para />
        <maml:para>Set-ImapSettings -ProtocolLogEnabled $true -LogFileLocation "C:\Imap4Logging"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example changes the IMAP4 protocol logging to create a new log file when a log file reaches 2 megabytes (MB).</maml:para>
        <maml:para />
        <maml:para>Set-ImapSettings -LogPerFileSizeQuota 2000000</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 4 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example changes the IMAP4 protocol logging to create a new log file every hour.</maml:para>
        <maml:para />
        <maml:para>Set-ImapSettings -LogPerFileSizeQuota 0 -LogFileRollOverSettings Hourly</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can run the Set-ImapSettings cmdlet for a single Client Access server that has the Microsoft Exchange IMAP4 service installed, or for all Exchange Client Access servers that have the Microsoft Exchange IMAP4 service installed.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "IMAP4 settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/58e51734-83bd-4e71-bd13-9960efaa80c3(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>5a5197f2-a219-4dd2-abe3-d0e8722f414a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-OutlookProtectionRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-OutlookProtectionRule cmdlet to retrieve Microsoft Outlook protection rules configured in an organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>OutlookProtectionRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-OutlookProtectionRule</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter identifies an Outlook protection rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example gets details of all Outlook protection rules configured in the organization.</maml:para>
        <maml:para />
        <maml:para>Get-OutlookProtectionRule</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example gets all properties of the Outlook protection rule ProjectContoso.</maml:para>
        <maml:para />
        <maml:para>Get-OutlookProtectionRule ProjectContoso | Format-List</maml:para>
        <maml:para>The Identity parameter is positional. When used after the cmdlet name, the parameter value can be specified without providing the parameter label.</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Outlook protection rules are used to automatically Information Rights Management (IRM)-protect email messages using a Rights Management Services (RMS) template before the message is sent. However, Outlook protection rules don't inspect message content. To IRM-protect messages based on message content, use transport protection rules. For more information, see Outlook protection rules.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Information Rights Management (IRM) configuration" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/5a5197f2-a219-4dd2-abe3-d0e8722f414a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>5b9cf002-848a-4f35-b51f-e1ede131b136
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-SendConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-SendConnector cmdlet to modify a Send connector.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>SendConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-SendConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">SendConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AddressSpaces</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AuthenticationCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CloudServicesMailEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionInactivityTimeOut</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DNSRoutingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainSecureEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ErrorPolicies</maml:name>
        <command:parameterValue required="True">Default | DowngradeDnsFailures | DowngradeCustomFailures | UpgradeCustomFailures</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForceHELO</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Fqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FrontendProxyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreSTARTTLS</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsScopedConnector</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Port</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireOorg</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireTLS</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmartHostAuthMechanism</maml:name>
        <command:parameterValue required="True">None | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmartHosts</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmtpMaxMessagesPerConnection</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SourceIPAddress</maml:name>
        <command:parameterValue required="True">IPAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SourceTransportServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsAuthLevel</maml:name>
        <command:parameterValue required="True">EncryptionOnly | CertificateValidation | DomainValidation</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsCertificateName</maml:name>
        <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsDomain</maml:name>
        <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UseExternalDNSServersEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The GUID or connector name that represents the Send connector you want to modify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SendConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>SendConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddressSpaces</maml:name>
      <maml:description>
        <maml:para>The AddressSpaces parameter specifies the domain names to which the Send connector routes mail. The complete syntax for entering each address space is as follows: &lt;AddressSpaceType&gt;:&lt;AddressSpace&gt;;&lt;AddressSpaceCost&gt;</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AddressSpaceType: On an Edge server, the address space type must be SMTP. In the Transport service on a Mailbox server, the address space type may be SMTP, X400, or any other text string. If you omit the address space type, SMTP is assumed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AddressSpace: For SMTP address space types, the address space that you enter must be RFC 1035-compliant. For example, *, *.com, and *.contoso.com are permitted, but *contoso.com is not. For X.400 address space types, the address space that you enter must be RFC 1685-compliant, such as o=MySite;p=MyOrg;a=adatum;c=us. For all other values of address space type, you can enter any text for the address space.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AddressSpaceCost: The valid input range for the cost is from 1 through 100. A lower cost indicates a better route. This parameter is optional. If you omit the address space cost, a cost of 1 is assumed. If you enter a non-SMTP address space that contains the semicolon character (;), you must specify the address space cost.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify the address space type or the address space cost, you must enclose the address space in quotation marks ("). For example, the following address space entries are equivalent:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>"SMTP:contoso.com;1"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>"contoso.com;1"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>"SMTP:contoso.com"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>contoso.com</maml:para>
        </command:listItem></command:list>
        <maml:para>You may specify multiple address spaces by separating the address spaces with commas, for example: contoso.com,fabrikam.com. If you specify the address space type or the address space cost, enclose the address space in quotation marks ("), for example: "contoso.com;2","fabrikam.com;3".</maml:para>
        <maml:para>If you specify a non-SMTP address space type on a Send connector configured in the Transport service on a Mailbox server, you must configure the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>The SmartHosts parameter must be set to a value that specifies a smart host.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The DNSRoutingEnabled parameter must be set to $false.</maml:para>
        </command:listItem></command:list>
        <maml:para>Although you can configure non-SMTP address spaces on a Send connector in the Transport service on a Mailbox server, the Send connector uses SMTP as the transport mechanism to send messages to other messaging servers. Foreign connectors in the Transport service on a Mailbox server are used to send messages to local messaging servers, such as third-party fax gateway servers, which don't use SMTP as their primary transport mechanism. For more information, see Foreign connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AuthenticationCredential</maml:name>
      <maml:description>
        <maml:para>The AuthenticationCredential parameter specifies a credential object. This credential object is created by using the Get-Credential cmdlet. For more information about the Get-Credential cmdlet, enter Get-Help Get-Credential in the Exchange Management Shell.</maml:para>
      </maml:description>
      <command:parameterValue required="True">PSCredential</command:parameterValue>
      <dev:type>
        <maml:name>PSCredential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CloudServicesMailEnabled</maml:name>
      <maml:description>
        <maml:para>Set to $true to enable this connector to send messages to the cloud service.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comment</maml:name>
      <maml:description>
        <maml:para>TheComment parameter specifies an optional comment. You must enclose the Comment parameter in quotation marks ("), for example: "this is an admin note".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectionInactivityTimeOut</maml:name>
      <maml:description>
        <maml:para>The ConnectionInactivityTimeOut parameter specifies the maximum time an idle connection can remain open. The default value is ten minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify fifteen minutes, set it to 00:15:00. The valid input range for this parameter is 00:00:01 to 1.00:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DNSRoutingEnabled</maml:name>
      <maml:description>
        <maml:para>The DNSRoutingEnabled parameter specifies whether the Send connector uses Domain Name System (DNS) to route mail. Valid values for this parameter are $true or $false. The default value is $true. If you specify a SmartHosts parameter, the DNSRoutingEnabled parameter must be $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainSecureEnabled</maml:name>
      <maml:description>
        <maml:para>The DomainSecureEnabled parameter is part of the process to enable mutual Transport Layer Security (TLS) authentication for the domains serviced by this Send connector. Mutual TLS authentication functions correctly only when the following conditions are met:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>The value of the DomainSecureEnabled parameter must be $true.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The value of the DNSRoutingEnabled parameter must be $true.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The value of the IgnoreStartTLS parameter must be $false.</maml:para>
        </command:listItem></command:list>
        <maml:para>The wildcard character (*) is not supported in domains that are configured for mutual TLS authentication. The same domain must also be defined on the corresponding Receive connector and in the TLSReceiveDomainSecureList attribute of the transport configuration.</maml:para>
        <maml:para>The default value for the DomainSecureEnabled parameter is $false for the following types of Send connectors:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>All Send connectors defined in the Transport service on a Mailbox server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User-created Send connectors defined on an Edge server.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value for the DomainSecureEnabled parameter is $true for default Send connectors defined on an Edge server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether to enable the Send connector to process email messages. Valid values are $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ErrorPolicies</maml:name>
      <maml:description>
        <maml:para>The ErrorPolicies parameter specifies how communication errors are treated. Possible values are the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Default A non-delivery report (NDR) is generated for communication errors.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DowngradeDnsFailures All DNS errors are treated as transient.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DowngradeCustomFailures Particular SMTP errors are treated as transient.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UpgradeCustomFailures Custom transient failures are upgraded and treated as permanent failures.</maml:para>
        </command:listItem></command:list>
        <maml:para>Multiple values can be specified for this parameter, separated by commas.</maml:para>
        <maml:para>Specify a value other than Default for this parameter only if this Send connector is used to send messages over a reliable and well-defined communication channel where communication errors aren't expected. For example, consider specifying a value other than Default if this Send connector is used to send messages to a partner.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Default | DowngradeDnsFailures | DowngradeCustomFailures | UpgradeCustomFailures</command:parameterValue>
      <dev:type>
        <maml:name>Default | DowngradeDnsFailures | DowngradeCustomFailures | UpgradeCustomFailures</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress warning or confirmation messages. This switch can be used when the task is run programmatically and prompting for administrative input is inappropriate. If the Force switch isn't provided in the command, you're prompted for administrative input. You don't have to specify a value with this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ForceHELO</maml:name>
      <maml:description>
        <maml:para>The ForceHELO parameter specifies whether HELO is sent instead of the default EHLO. Valid values are $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Fqdn</maml:name>
      <maml:description>
        <maml:para>The Fqdn parameter specifies the FQDN used as the source server for connected messaging servers that use the Send connector to receive outgoing messages. The value of this parameter is displayed to connected messaging servers whenever a source server name is required, as in the following examples:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>In the EHLO/HELO command when the Send connector communicates with the next hop messaging server</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>In the most recent Received header field added to the message by the next hop messaging server after the message leaves the Transport service on a Mailbox server or an Edge server</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>During TLS authentication</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value of the Fqdn parameter is $null. This means the default FQDN value is the FQDN of the Mailbox server or Edge server that contains the Send connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FrontendProxyEnabled</maml:name>
      <maml:description>
        <maml:para>The FrontendProxyEnabled parameter routes outbound messages through the CAS server, where destination specific routing, such as DNS or IP address, is set, when the parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreSTARTTLS</maml:name>
      <maml:description>
        <maml:para>The IgnoreSTARTTLS parameter specifies whether to ignore the StartTLS option offered by a remote sending server. This parameter is used with remote domains. This parameter must be set to $false if the RequireTLS parameter is set to $true. Valid values for this parameter are $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsScopedConnector</maml:name>
      <maml:description>
        <maml:para>The IsScopedConnector parameter specifies the availability of the connector to other Mailbox servers with the Transport service. When the value of this parameter is $false, the connector can be used by all Mailbox servers in the Exchange organization. When the value of this parameter is $true, the connector can only be used by Transport service on Mailbox servers in the same Active Directory site. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxMessageSize</maml:name>
      <maml:description>
        <maml:para>The MaxMessageSize parameter specifies the maximum size of a message that can pass through a connector. The default value is 25 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is 0 to 2147483647 bytes. To remove the message size limit on a Send connector, enter a value of unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the administrator-supplied name of the connector. You must enclose the Name parameter in quotation marks (") if the name contains spaces. For example, "New Send Connector".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Port</maml:name>
      <maml:description>
        <maml:para>The Port parameter specifies the port number for smart host forwarding, if you specify a value in the SmartHosts parameter. The valid input range is an integer from 0 through 65535. The default value is 25. In most organizations, the port number is set to 25.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProtocolLoggingLevel</maml:name>
      <maml:description>
        <maml:para>The ProtocolLoggingLevel parameter specifies whether to enable protocol logging. Verbose enables protocol logging. None disables protocol logging. The location of the Send connector protocol logs for all Send connectors configured in the Transport service on a Mailbox server or on an Edge server is specified with the SendProtocolLogPath parameter of the Set-TransportService cmdlet.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>None | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequireOorg</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequireTLS</maml:name>
      <maml:description>
        <maml:para>The RequireTLS parameter specifies whether all messages sent through this connector must be transmitted using TLS. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmartHostAuthMechanism</maml:name>
      <maml:description>
        <maml:para>The SmartHostAuthMechanism parameter specifies the smart host authentication mechanism to use for authentication with a remote server. Use this parameter only when a smart host is configured and the DNSRoutingEnabled parameter is set to $false. Valid values are None, BasicAuth, BasicAuthRequireTLS, ExchangeServer, and ExternalAuthoritative. All values are mutually exclusive. If you select BasicAuth or BasicAuthRequireTLS, you must use the AuthenticationCredential parameter to specify the authentication credential.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      <dev:type>
        <maml:name>None | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmartHosts</maml:name>
      <maml:description>
        <maml:para>The SmartHosts parameter specifies the smart hosts the Send connector uses to route mail. This parameteris required if you set the DNSRoutingEnabled parameter to $false and it must be specified on the same command line. The SmartHosts parameter takes one or more FQDNs, such as server.contoso.com, or one or more IP addresses, or a combination of both FQDNs and IP addresses. If you enter an IP address, you must enter the IP address as a literal. For example, 10.10.1.1. The smart host identity can be the FQDN of a smart-host server, a mail exchanger (MX) record, or an address (A) record. If you configure an FQDN as the smart host identity, the source server for the Send connector must be able to use DNS name resolution to locate the smart-host server.</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmtpMaxMessagesPerConnection</maml:name>
      <maml:description>
        <maml:para>The SmtpMaxMessagesPerConnection parameter specifies the maximum number of messages the server can send per connection.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SourceIPAddress</maml:name>
      <maml:description>
        <maml:para>The SourceIPAddress parameter specifies the local IP address to use as the endpoint for an SMTP connection to a remote messaging server. The default IP address is 0.0.0.0. This value means that the server can use any available local IP address. This parameter is valid only for Send connectors configured on an Edge server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">IPAddress</command:parameterValue>
      <dev:type>
        <maml:name>IPAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SourceTransportServers</maml:name>
      <maml:description>
        <maml:para>The SourceTransportServers parameter specifies the names of the Mailbox servers that can use this Send connector. This parameter isn't valid for Send connectors configured on an Edge server.</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsAuthLevel</maml:name>
      <maml:description>
        <maml:para>The TlsAuthLevel parameter specifies the TLS authentication level that is used for outbound TLS connections established by this Send connector. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>EncryptionOnly: TLS is used only to encrypt the communication channel. No certificate authentication is performed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CertificateValidation: TLS is used to encrypt the channel and certificate chain validation and revocation lists checks are performed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DomainValidation: In addition to channel encryption and certificate validation, the Send connector also verifies that the FQDN of the target certificate matches the domain specified in the TlsDomain parameter. If no domain is specified in the TlsDomain parameter, the FQDN on the certificate is compared with the recipient's domain.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can't specify a value for this parameter if the IgnoreSTARTTLS parameter is set to $true, or if the RequireTLS parameter is set to $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EncryptionOnly | CertificateValidation | DomainValidation</command:parameterValue>
      <dev:type>
        <maml:name>EncryptionOnly | CertificateValidation | DomainValidation</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsCertificateName</maml:name>
      <maml:description>
        <maml:para>The TlsCertificateName parameter specifies the X.509 certificate to use with TLS sessions and secure mail. Valid input for this parameter is [I]Issuer[S]Subject. The Issuer value is found in the certificate's Issuer field, and the Subject value is found in the certificate's Subject field. You can find these values by running the Get-ExchangeCertificate cmdlet.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      <dev:type>
        <maml:name>SmtpX509Identifier</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsDomain</maml:name>
      <maml:description>
        <maml:para>The TlsDomain parameter specifies the domain name that the Send connector uses to verify the FQDN of the target certificate when establishing a TLS secured connection.</maml:para>
        <maml:para>This parameter is used only if the TlsAuthLevel parameter is set to DomainValidation.</maml:para>
        <maml:para>A value for this parameter is required if:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>The TLSAuthLevel parameter is set to DomainValidation.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The DNSRoutingEnabled parameter is set to $false (smart host Send connector).</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      <dev:type>
        <maml:name>SmtpDomainWithSubdomains</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UseExternalDNSServersEnabled</maml:name>
      <maml:description>
        <maml:para>The UseExternalDNSServersEnabled parameter specifies whether this Send connector uses the external DNS list specified by the ExternalDNSServers parameter of the Set-TransportService cmdlet. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example makes the following configuration changes to the Send connector named Contoso.com Send Connector:</maml:para>
        <maml:para />
        <maml:para>Sets the maximum message size limit to 10 MB.</maml:para>
        <maml:para>Changes the connection inactivity time-out to 15 minutes.</maml:para>
        <maml:para>Set-SendConnector "Contoso.com Send Connector" -MaxMessageSize 10MB -ConnectionInactivityTimeOut 00:15:00</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Send connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/5b9cf002-848a-4f35-b51f-e1ede131b136(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>5e0b61b0-ece6-4d9b-949a-f6a032dd0fb9
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-ExchangeCertificate</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-ExchangeCertificate cmdlet to create a self-signed certificate, renew an existing self-signed certificate, or generate a new certificate request for obtaining a certificate from a certification authority (CA).</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>ExchangeCertificate</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-ExchangeCertificate</maml:name>
      <command:parameter required="False">
        <maml:name>Services</maml:name>
        <command:parameterValue required="True">None | IMAP | POP | UM | IIS | SMTP | Federation | UMCallRouter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainName</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FriendlyName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeAcceptedDomains</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeAutoDiscover</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeServerFQDN</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeServerNetBIOSName</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Instance</maml:name>
        <command:parameterValue required="True">X509Certificate2</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>KeySize</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PrivateKeyExportable</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectKeyIdentifier</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectName</maml:name>
        <command:parameterValue required="True">X500DistinguishedName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>New-ExchangeCertificate</maml:name>
      <command:parameter required="False">
        <maml:name>BinaryEncoded</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GenerateRequest</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequestFile</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainName</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FriendlyName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeAcceptedDomains</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeAutoDiscover</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeServerFQDN</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeServerNetBIOSName</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Instance</maml:name>
        <command:parameterValue required="True">X509Certificate2</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>KeySize</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PrivateKeyExportable</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectKeyIdentifier</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubjectName</maml:name>
        <command:parameterValue required="True">X500DistinguishedName</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BinaryEncoded</maml:name>
      <maml:description>
        <maml:para>The BinaryEncoded switch specifies how the certificate request is encoded. By default, this cmdlet creates a Base64-encoded request.</maml:para>
        <maml:para>Use this switch to create a DER-encoded request.</maml:para>
        <maml:para>The BinaryEncoded switch is available only if you use the GenerateRequest switch.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainName</maml:name>
      <maml:description>
        <maml:para>The DomainName parameter specifies one or more FQDNs or server names to be populated in the Subject Alternative Name field of the resulting certificate request or self-signed certificate.</maml:para>
        <maml:para>Domain names are restricted to the characters a through z, 0 through 9, and the hyphen (-). Each domain name can't be longer than 255 characters.</maml:para>
        <maml:para>To enter multiple domain or server names, you must enter the names separated by commas.</maml:para>
        <maml:para>If this parameter isn't specified, and you don't use the IncludeAcceptedDomains, IncludeAutoDiscover, IncludeServerFQDN, and IncludeServerNetBIOSName switches, the server's hostname and FQDN are added by default.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to override the confirmation prompt and set the new self-signed certificate as the default certificate for TLS for internal SMTP communication. By default, this cmdlet requires a confirmation before setting the new certificate as the default certificate for TLS encryption of internal SMTP communication.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FriendlyName</maml:name>
      <maml:description>
        <maml:para>The FriendlyName parameter specifies a friendly name for the certificate. The friendly name must be less than 64 characters.</maml:para>
        <maml:para>The default friendly name is Microsoft Exchange.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GenerateRequest</maml:name>
      <maml:description>
        <maml:para>The GenerateRequest switch specifies whether to generate a certificate request for a public key infrastructure (PKI) certificate (PKCS #10) in the local request store.</maml:para>
        <maml:para>By default, this cmdlet creates a self-signed certificate in the local computer certificate store. The GenerateRequest switch overrides this behavior.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeAcceptedDomains</maml:name>
      <maml:description>
        <maml:para>The IncludeAcceptedDomains switch specifies whether all accepted domains in the organization are included in the Subject Alternative Name field of the certificate request or self-signed certificate.</maml:para>
        <maml:para>You can also specify one or more domain names using the DomainName parameter in addition to the accepted domains. The resulting certificate or request contains the specified domains and all accepted domains.</maml:para>
        <maml:para>When you use the IncludeAcceptedDomains switch, any accepted domains you specify in the DomainName parameter aren't duplicated.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeAutoDiscover</maml:name>
      <maml:description>
        <maml:para>The IncludeAutoDiscover switch specifies whether to add a Subject Alternative Name with the prefix autodiscover for each accepted domain in the Exchange organization. For example, if the organization has the accepted domains woodgrovebank.com and woodgrovebank.co.uk, using this switch results in the addition of the following Subject Alternative Names:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>autodiscover.woodgrovebank.com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>autodiscover.woodgrovebank.co.uk</maml:para>
        </command:listItem></command:list>
        <maml:para>The switch can only be used on Client Access servers.</maml:para>
        <maml:para>The autodiscover prefix isn't added if the domain name already contains the prefix.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeServerFQDN</maml:name>
      <maml:description>
        <maml:para>The IncludeServerFQDN switch specifies whether to include the FQDN of the server in the Subject Alternative Name field of the new certificate request or self-signed certificate.</maml:para>
        <maml:para>When you use the IncludeServerFQDN switch, any FQDNs you specify in the DomainName parameter aren't duplicated.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeServerNetBIOSName</maml:name>
      <maml:description>
        <maml:para>The IncludeServerNetBIOSName switch specifies whether to include the NetBIOS name of the server in the Subject Alternative Name field of the new certificate request or self-signed certificate.</maml:para>
        <maml:para>When you use the IncludeServerNetBIOSName switch, any NetBIOS names you specify in the DomainName parameter aren't duplicated.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Instance</maml:name>
      <maml:description>
        <maml:para>The Instance parameter is no longer used and will be deprecated.</maml:para>
      </maml:description>
      <command:parameterValue required="True">X509Certificate2</command:parameterValue>
      <dev:type>
        <maml:name>X509Certificate2</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>KeySize</maml:name>
      <maml:description>
        <maml:para>The KeySize parameter specifies the size (in bits) of the RSA public key associated with the certificate that you're creating.</maml:para>
        <maml:para>Acceptable values are 4096, 2048, and 1024. The default value is 2048.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PrivateKeyExportable</maml:name>
      <maml:description>
        <maml:para>The PrivateKeyExportable parameter specifies whether the new certificate has an exportable private key.</maml:para>
        <maml:para>By default, all certificate requests and certificates created by this cmdlet don't allow the private key to be exported.</maml:para>
        <maml:para>If you can't export the private key, the certificate can't be exported or imported.</maml:para>
        <maml:para>To allow exporting the private key when exporting the certificate, set this parameter to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequestFile</maml:name>
      <maml:description>
        <maml:para>The RequestFile parameter specifies the name of the file that contains the certificate request. This parameter is used with the BinaryEncoded and GenerateRequest parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the server name for which you want to create the new certificate. If not specified, the certificate or certificate request is generated for the Exchange server on which the command is executed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Services</maml:name>
      <maml:description>
        <maml:para>The Services parameter specifies the services that will use the resulting certificate.</maml:para>
        <maml:para>You can specify services using the New-ExchangeCertificate cmdlet only if you're generating a self-signed certificate. If you're creating a certificate request for a CA using the GenerateRequest switch, you must install the certificate after it's issued by the CA, and then specify services using the Enable-ExchangeCertificate cmdlet.</maml:para>
        <maml:para>Valid values include a combination of the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Federation</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>IIS</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>IMAP</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>None</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>POP</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SMTP</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UM</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UMCallRouter</maml:para>
        </command:listItem></command:list>
        <maml:para>The default values are IMAP,POP, and SMTP.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | IMAP | POP | UM | IIS | SMTP | Federation | UMCallRouter</command:parameterValue>
      <dev:type>
        <maml:name>None | IMAP | POP | UM | IIS | SMTP | Federation | UMCallRouter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectKeyIdentifier</maml:name>
      <maml:description>
        <maml:para>The SubjectKeyIdentifier parameter specifies the subject key identifier extension for the certificate, which isn't required for normal operation.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubjectName</maml:name>
      <maml:description>
        <maml:para>The SubjectName parameter specifies the subject name of the resulting certificate. A subject name is an X.500 distinguished name that consists of one or more relative distinguished names (also known as RDNs).</maml:para>
        <maml:para>The subject name of a certificate is the field used by Domain Name System (DNS)-aware services. It binds a certificate to a particular server or domain name.</maml:para>
        <maml:para>If the SubjectName parameter isn't specified, the host name of the server where the cmdlet is run is used as the common name (CN) in the resulting certificate. For example, for the server EXMBX01, the SubjectName parameter value CN=EXMBX01 is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">X500DistinguishedName</command:parameterValue>
      <dev:type>
        <maml:name>X500DistinguishedName</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example runs the New-ExchangeCertificate cmdlet without parameters and generates a self-signed certificate. The certificate has the fully qualified domain name (FQDN) of the local computer as the subject name. The Network Services local security group is also provided read access to the private key associated with the certificate. In addition, the certificate is published to Active Directory so that Exchange direct trust can validate the authenticity of the server for mutual TLS.</maml:para>
        <maml:para />
        <maml:para>New-ExchangeCertificate</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example outputs the certificate request in Base64 format to the command-line console. You must send the certificate request to a CA within the organization, a trusted CA outside the organization, or a commercial CA. You can do this by pasting the certificate request output in an email message or in the appropriate field on the certificate request web page of the CA. You can also save the certificate request to a file using a text editor such as Notepad.</maml:para>
        <maml:para />
        <maml:para>The certificate that results has the following attributes associated with it:</maml:para>
        <maml:para />
        <maml:para>Subject name: c=&lt;ES&gt;,o=&lt;Woodgrove Bank&gt;,cn=mail1.woodgrovebank.com</maml:para>
        <maml:para>Subject alternate names: woodgrovebank.com and example.com</maml:para>
        <maml:para>An exportable private key</maml:para>
        <maml:para>New-ExchangeCertificate -GenerateRequest -SubjectName "c=US, o=Woodgrove Bank, cn=mail1.woodgrovebank.com" -DomainName woodgrovebank.com, example.com -PrivateKeyExportable $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example is a variation of the certificate request generated in EXAMPLE 2. Instead of manually pasting the certificate request output produced by the cmdlet, the Set-Content cmdlet is used to write the request to a file.</maml:para>
        <maml:para />
        <maml:para>The certificate that results has the following attributes associated with it:</maml:para>
        <maml:para />
        <maml:para>Subject name: c=&lt;ES&gt;,o=&lt;Woodgrove Bank&gt;,cn=mail1.woodgrovebank.com</maml:para>
        <maml:para>Subject alternate names: woodgrovebank.com and example.com</maml:para>
        <maml:para>An exportable private key</maml:para>
        <maml:para>In the first step, the New-ExchangeCertificate cmdlet is used to generated the certificate request and save the output in a variable named $Data.</maml:para>
        <maml:para />
        <maml:para>$Data = New-ExchangeCertificate -GenerateRequest -SubjectName "c=US, o=Woodgrove Bank, cn=mail1.woodgrovebank.com" -DomainName woodgrovebank.com, example.com -PrivateKeyExportable $true</maml:para>
        <maml:para>In the second step, the Set-Content cmdlet is used to write data from the variable to the certificate request file MyCertRequest.req in the Docs folder.</maml:para>
        <maml:para />
        <maml:para>Set-Content -path "C:\Docs\MyCertRequest.req" -Value $Data</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 4 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a DER-encoded certificate request file. The BinaryEncoded parameter is used to generate a DER-encoded certificate request. The Set-Content cmdlet is used with the Encoding parameter to write the request to a file.</maml:para>
        <maml:para />
        <maml:para>The certificate that results will have the following attributes associated with it:</maml:para>
        <maml:para />
        <maml:para>Subject name: c=ES,o=Woodgrove Bank,cn=mail1.woodgrovebank.com</maml:para>
        <maml:para>Subject alternate names: woodgrovebank.com and example.com</maml:para>
        <maml:para>An exportable private key</maml:para>
        <maml:para>In the first step, the New-ExchangeCertificate cmdlet is used to generate the certificate request in DER-encoded format and save the output in a variable named $Data.</maml:para>
        <maml:para />
        <maml:para>$Data = New-ExchangeCertificate -GenerateRequest -SubjectName "c=ES, o=Woodgrove Bank, cn=mail1.woodgrovebank.com" -DomainName woodgrovebank.com, example.com -BinaryEncoded -PrivateKeyExportable $true</maml:para>
        <maml:para>In the second step, the Set-Content cmdlet is used to write data from the variable to the certificate request file MyCertRequest.req in the Docs folder.</maml:para>
        <maml:para />
        <maml:para>Set-Content -path "C:\Docs\MyCertRequest.req" -Value $Data.FileData -Encoding Byte</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 5 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows how to renew a self-signed certificate with a specific thumbprint value. You can obtain the thumbprint value in one of two ways.</maml:para>
        <maml:para />
        <maml:para>Select the certificate in the Exchange Administration Center, and then select Edit to view properties of the certificate. The thumbprint value is shown in the Exchange Certificate window.</maml:para>
        <maml:para>Run the Get-ExchangeCertificate cmdlet to return a list of all certificates installed on the server with their thumbprint values.</maml:para>
        <maml:para>Get-ExchangeCertificate -Thumbprint c4248cd7065c87cb942d60f7293feb7d533a4afc | New-ExchangeCertificate</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Microsoft Exchange Server 2013 uses certificates for SSL and TLS encryption. The New-ExchangeCertificate cmdlet uses many parameters of type SwitchParameter. For more information about how to use this parameter type, see "Switch Parameters" in Parameters.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Certificate management" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/5e0b61b0-ece6-4d9b-949a-f6a032dd0fb9(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>5e1b2b06-f24e-4f33-8ddc-fdb1c5bb7eb2
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Test-WebServicesConnectivity</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Test-WebServicesConnectivity cmdlet to perform basic operations to verify the functionality of Exchange Web Services on a server running Microsoft Exchange Server 2013.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Test</command:verb>
    <command:noun>WebServicesConnectivity</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Test-WebServicesConnectivity</maml:name>
      <command:parameter required="False">
        <maml:name>ClientAccessServer</maml:name>
        <command:parameterValue required="True">ClientAccessServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LightMode</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TrustAnySSLCertificate</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Test-WebServicesConnectivity</maml:name>
      <command:parameter required="True">
        <maml:name>MonitoringContext</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LightMode</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TrustAnySSLCertificate</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Test-WebServicesConnectivity</maml:name>
      <command:parameter required="True">
        <maml:name>AutoDiscoverServer</maml:name>
        <command:parameterValue required="True">ClientAccessServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LightMode</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TrustAnySSLCertificate</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AutoDiscoverServer</maml:name>
      <maml:description>
        <maml:para>The AutoDiscoverServer parameter specifies the Client Access server to use to test Autodiscover connectivity.</maml:para>
        <maml:para>You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
          <maml:para>Example: Exchange01</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
          <maml:para>Example: CN=Exchange01,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=contoso,DC=com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
          <maml:para>Example: /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Exchange01</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
          <maml:para>Example: bc014a0d-1509-4ecc-b569-f077eec54942</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">ClientAccessServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ClientAccessServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MonitoringContext</maml:name>
      <maml:description>
        <maml:para>The MonitoringContext switch includes the associated monitoring events and performance counters in the results. You don't need to specify a value with this switch. Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager 2007 or System Center 2012 - Operations Manager.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>ClientAccessServer</maml:name>
      <maml:description>
        <maml:para>The ClientAccessServer parameter specifies the Client Access server to use when the command is run.</maml:para>
        <maml:para>You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
          <maml:para>Example: Exchange01</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
          <maml:para>Example: CN=Exchange01,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=contoso,DC=com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
          <maml:para>Example: /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Exchange01</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
          <maml:para>Example: bc014a0d-1509-4ecc-b569-f077eec54942</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">ClientAccessServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ClientAccessServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the mailbox to use for the test. When you use this parameter, you also need to use the MailboxCredential parameter.</maml:para>
        <maml:para>This parameter accepts the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
          <maml:para>Example: JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Canonical DN</maml:para>
          <maml:para>Example: Atlanta.Corp.Contoso.Com/Users/JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display Name</maml:para>
          <maml:para>Example: Jeff Phillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished Name (DN)</maml:para>
          <maml:para>Example: CN=JPhillips,CN=Users,DC=Atlanta,DC=Corp,DC=contoso,DC=com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Domain\Account</maml:para>
          <maml:para>Example: Atlanta\JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
          <maml:para>Example: fb456636-fe7d-4d58-9d15-5af57d0354c2</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Immutable ID</maml:para>
          <maml:para>Example: fb456636-fe7d-4d58-9d15-5af57d0354c2@contoso.com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Legacy Exchange DN</maml:para>
          <maml:para>Example: /o=Contoso/ou=AdministrativeGroup/cn=Recipients/cn=JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SMTP Address</maml:para>
          <maml:para>Example: Jeff.Phillips@contoso.com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User Principal Name</maml:para>
          <maml:para>Example: JPhillips@contoso.com</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LightMode</maml:name>
      <maml:description>
        <maml:para>The LightMode switch instructs the command to perform only a subset of the connectivity tests. When you use this parameter, the EWS: ConvertId operation is tested instead of the EWS: GetFolder operation.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxCredential</maml:name>
      <maml:description>
        <maml:para>The MailboxCredential parameter specifies the mailbox credentials to use when the command is run. This parameter is required when you use the Identity parameter.</maml:para>
        <maml:para>This parameter requires the creation and passing of a credential object. This credential object is created by using the Get-Credential cmdlet. For more information, see Get-Credential (http://go.microsoft.com/fwlink/p/?linkId=142122).</maml:para>
      </maml:description>
      <command:parameterValue required="True">PSCredential</command:parameterValue>
      <dev:type>
        <maml:name>PSCredential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TrustAnySSLCertificate</maml:name>
      <maml:description>
        <maml:para>The TrustAnySSLCertificate switch allows the test to use any SSL certificate that's available.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example tests the connection to Exchange Web Services on the Client Access server named CAS01. The test account that was created by running the New-TestCasConnectivityUser.ps1 script is used.</maml:para>
        <maml:para />
        <maml:para>Test-WebServicesConnectivity -ClientAccessServer CAS01</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>To use most of the features of this cmdlet, you need to create a test user by running the following command.</maml:para>
    <maml:para>&amp; $env:ExchangeInstallPath\Scripts\New-TestCasConnectivityUser.ps1</maml:para>
    <dev:code />
    <maml:para />
    <maml:para>The Test-WebServicesConnectivity results are displayed on-screen. The cmdlet returns the following information.</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>Source Source server.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>ServiceEndpoint Destination server.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Scenario The operations that are tested. Values are Autodiscover: SOAP Provider and EWS: GetFolder or EWS: ConvertID.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Result The values returned are typically Success or *FAILURE*.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Latency (MS) The time required to complete the test in milliseconds</maml:para>
    </command:listItem></command:list>
    <maml:para>You can write the results to a file by piping the output to ConvertTo-Html or ConvertTo-Csv and adding "&gt; &lt;filename&gt;" to the command. For example:</maml:para>
    <maml:para>Test-WebServicesConnectivity -ClientAccessServer CAS01 | ConvertTo-Html &gt; "C:\My Documents\EWS Test.html"</maml:para>
    <dev:code />
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Test Exchange Web Services" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/5e1b2b06-f24e-4f33-8ddc-fdb1c5bb7eb2(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>61e79b8f-2806-4c15-bdc3-74b181482d8f
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-HotmailSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-HotmailSubscription cmdlet to view information about Hotmail subscriptions configured in cloud-based mailboxes.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>HotmailSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-HotmailSubscription</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeReport</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AggregationType</maml:name>
        <command:parameterValue required="True">Aggregation | Mirrored | Migration | PeopleConnection | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AggregationType</maml:name>
      <maml:description>
        <maml:para>The AggregationType parameter filters the results by type. The acceptable values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>All</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Aggregation</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Migration</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Mirrored</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PeopleConnection</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Aggregation | Mirrored | Migration | PeopleConnection | All</command:parameterValue>
      <dev:type>
        <maml:name>Aggregation | Mirrored | Migration | PeopleConnection | All</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the Hotmail subscription. You can identify the subscription by using one of the following methods:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Specify the globally unique identifier of the subscription, which is its canonical name (CN).</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Use the Mailbox parameter to specify the mailbox that contains the subscription, and then specify the name of the subscription.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can find the identifying values for a Hotmail subscription, such as Identity and Name, by running this command: Get-HotmailSubscription -Mailbox &lt;mailbox&gt;.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeReport</maml:name>
      <maml:description>
        <maml:para>The IncludeReport switch specifies whether to return additional details, which can be used for troubleshooting.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that contains the Hotmail subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the total number of subscriptions to return. If no value is specified, the parameter returns all results that match the filter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all the Hotmail subscriptions configured in the mailbox of the user Brian Johnson.</maml:para>
        <maml:para />
        <maml:para>Get-HotmailSubscription -Mailbox "Brian Johnson"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns additional information about the Hotmail subscriptions configured in the mailbox of the user Kim Akers.</maml:para>
        <maml:para />
        <maml:para>Get-HotmailSubscription -Mailbox "Kim Akers" -IncludeReport | Export-CSV C:\KimAkersHotmailReport</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can view the properties of the Hotmail subscription, such as the connection status and the last time a successful synchronization occurred.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/61e79b8f-2806-4c15-bdc3-74b181482d8f(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>66285113-25d5-4fbf-baa9-8e65778761ad
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-AutodiscoverVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-AutodiscoverVirtualDirectory cmdlet to configure settings on the Autodiscover virtual directory on a server running Microsoft Exchange Server 2013. You can run this cmdlet on the local Client Access server or from another Exchange 2013 server.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>AutodiscoverVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-AutodiscoverVirtualDirectory</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BasicAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DigestAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionFlags</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionSPNList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionTokenChecking</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveIdBasicAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveIdNegotiateAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OAuthAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WindowsAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WSSecurityAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the virtual directory and the website. This parameter can also be used to specify the Client Access server if it's being run from another Exchange 2013 server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>VirtualDirectoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BasicAuthentication</maml:name>
      <maml:description>
        <maml:para>The BasicAuthentication parameter specifies Basic authentication on the Autodiscover virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DigestAuthentication</maml:name>
      <maml:description>
        <maml:para>The DigestAuthentication parameter specifies Digest authentication on the Autodiscover virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionFlags</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionFlags parameter is used to customize the options you use if you're using Extended Protection for Authentication. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Default setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Proxy Specifies that a proxy is terminating the SSL channel. A Service Principal Name (SPN) must be registered in the ExtendedProtectionSPNList parameter if proxy mode is configured.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProxyCoHosting Specifies that both HTTP and HTTPS traffic may be accessing the Client Access server and that a proxy is located between at least some of the clients and the Client Access server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AllowDotlessSPN Specifies whether you want to support valid SPNs that aren't in the fully qualified domain name (FQDN) format, for example ContosoMail. You specify valid SPNs with the ExtendedProtectionSPNList parameter. This option makes extended protection less secure because dotless certificates aren't unique, so it isn't possible to ensure that the client-to-proxy connection was established over a secure channel.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NoServiceNameCheck Specifies that the SPN list won't be checked to validate a channel binding token. This option makes Extended Protection for Authentication less secure. We generally don't recommend this setting.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionSPNList</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionSPNList parameter specifies a list of valid Service Principal Names (SPNs) if you're using Extended Protection for Authentication on the specified virtual directory.</maml:para>
        <maml:para>The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Null This is the default value.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Single SPN or comma delimited list of valid SPNs By default, you must specify the fully qualified domain name (FQDN) (for example mail.contoso.com) for each SPN. If you want to add an SPN that's not an FQDN (for example, ContosoMail), you must also use the ExtendedProtectionTokenChecking parameter with the AllowDotlessSPN value. You specify the domain in SPN format. The SPN format is &lt;protocol&gt;/&lt;FQDN&gt;. For example, a valid entry could be HTTP/mail.contoso.com.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionTokenChecking</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionTokenChecking parameter defines how you want to use Extended Protection for Authentication on the specified Exchange virtual directory. Extended Protection for Authentication isn't enabled by default. The available settings are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Extended Protection for Authentication won't be used. Connections between the client and Exchange won't use Extended Protection for Authentication on this virtual directory. This is the default setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Allow Extended Protection for Authentication will be used for connections between the client and Exchange on this virtual directory if both the client and server support Extended Protection for Authentication. Connections that don't support Extended Protection for Authentication on the client and server will work, but may not be as secure as a connection using Extended Protection for Authentication.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more Service Principal Names (SPNs) by using the ExtendedProtectionSPNList parameter.</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Require Extended Protection for Authentication will be used for all connections between clients and Exchange servers for this virtual directory. If either the client or server doesn't support Extended Protection for Authentication, the connection between the client and server will fail. If you set this option, you must also set a value for the ExtendedProtectionSPNList parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more SPNs using the parameter ExtendedProtectionSPNList.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      <dev:type>
        <maml:name>None | Allow | Require</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalUrl</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalUrl</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LiveIdBasicAuthentication</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LiveIdNegotiateAuthentication</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OAuthAuthentication</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WindowsAuthentication</maml:name>
      <maml:description>
        <maml:para>The WindowsAuthentication parameter specifies Integrated Windows authentication on the Autodiscover virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WSSecurityAuthentication</maml:name>
      <maml:description>
        <maml:para>The WSSecurityAuthentication parameter specifies whether to enable the WS-Security (Web Services Security) endpoint element in the Autodiscover Web.config file. The value can be set to $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the authentication method to Digest authentication for the Autodiscover virtual directory.</maml:para>
        <maml:para />
        <maml:para>Set-AutodiscoverVirtualDirectory -Identity 'autodiscover(default Web Site)' -WindowsAuthentication $false -BasicAuthentication $false -DigestAuthentication $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets Integrated Windows authentication for the Autodiscover virtual directory.</maml:para>
        <maml:para />
        <maml:para>Set-AutodiscoverVirtualDirectory -Identity 'autodiscover (default Web Site)' -WindowsAuthentication $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Autodiscover virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/66285113-25d5-4fbf-baa9-8e65778761ad(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>66fc6568-469f-4f06-9864-841cdbf7d367
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-AuthRedirect</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-AuthRedirect cmdlet to create OAuth redirection settings for Microsoft Exchange 2010 Client Access servers in your Microsoft Exchange 2013 organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>AuthRedirect</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-AuthRedirect</maml:name>
      <command:parameter required="True">
        <maml:name>AuthScheme</maml:name>
        <command:parameterValue required="True">Unknown | Bearer</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>TargetUrl</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AuthScheme</maml:name>
      <maml:description>
        <maml:para>The AuthScheme parameter specifies the authentication scheme that's used by the authentication redirection object. Typically, this value is Bearer.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unknown | Bearer</command:parameterValue>
      <dev:type>
        <maml:name>Unknown | Bearer</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetUrl</maml:name>
      <maml:description>
        <maml:para>The TargetUrl parameter specifies the FQDN of the Exchange 2013 Client Access server that will process the Oauth request.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates an OAuth redirection object with the following settings:</maml:para>
        <maml:para />
        <maml:para>AuthScheme Bearer</maml:para>
        <maml:para>TargetURL http://cas.contoso.com</maml:para>
        <maml:para>New-AuthRedirect -AuthScheme Bearer -TargetURL http://cas.contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Exchange 2010 Client Access servers don't support OAuth authentication requests. Use this cmdlet to redirect OAuth authentication requests to an Exchange 2013 Client Access server. This cmdlet is only useful if your organization has Exchange 2010 Client Access servers.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "OAuth authentication redirection settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/66fc6568-469f-4f06-9864-841cdbf7d367(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>6801411c-6faf-449f-aa8b-f4c105791d89
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-ReceiveConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-ReceiveConnector cmdlet to view the configuration information for a Receive connector.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>ReceiveConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-ReceiveConnector</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ReceiveConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-ReceiveConnector</maml:name>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>Specifies the GUID or connector name that represents a specific Receive connector. You can also include the server name using the format ServerName\ConnectorName.</maml:para>
        <maml:para>You can omit the parameter label so that only the connector name or GUID is supplied.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ReceiveConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ReceiveConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>Specifies the name of the server to query when the command is run. Only Receive connectors configured on the server you specify are displayed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed configuration information for the Receive Connector for Contoso.com.</maml:para>
        <maml:para />
        <maml:para>Get-ReceiveConnector "Receive Connector for Contoso.com" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all the Receive connectors on Hub1.</maml:para>
        <maml:para />
        <maml:para>Get-ReceiveConnector -Server Hub1</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Receive connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/6801411c-6faf-449f-aa8b-f4c105791d89(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>6837cb55-6734-4a28-9062-7227f57dafb2
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-MapiVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-MapiVirtualDirectory cmdlet to view Message Application Programming Interface (MAPI) virtual directories on Microsoft Exchange 2013 servers. A MAPI virtual directory is used by supported versions of Microsoft Outlook to connect to mailboxes by using the MAPIHTTP protocol.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>MapiVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-MapiVirtualDirectory</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADPropertiesOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowBackEndVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowMailboxVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-MapiVirtualDirectory</maml:name>
      <command:parameter required="True">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADPropertiesOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowBackEndVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowMailboxVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server that will host the virtual directory. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the virtual directory will be created on the server where the remote PowerShell session is established. This will always be a Mailbox server. If you want to create the virtual directory on a Client Access server or another Mailbox server, you need to use the Server parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ADPropertiesOnly</maml:name>
      <maml:description>
        <maml:para>The ADPropertiesOnly switch specifies whether to return only the properties about the virtual directory stored in Active Directory. The properties stored in the Internet Information Services (IIS) metabase aren't returned.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the MAPI virtual directory that you want to view.</maml:para>
        <maml:para>You can use any value that uniquely identifies the virtual directory. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name or &lt;Server&gt;\Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem></command:list>
        <maml:para>The Name value uses the syntax "&lt;VirtualDirectoryName&gt; (&lt;WebsiteName&gt;)" from the properties of the virtual directory. You can specify the wildcard character (*) instead of the default website by using the syntax &lt;VirtualDirectoryName&gt;*.</maml:para>
      </maml:description>
      <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>VirtualDirectoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShowBackEndVirtualDirectories</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShowMailboxVirtualDirectories</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns the settings of the MAPI virtual directory on the server named ContosoMail.</maml:para>
        <maml:para />
        <maml:para>Get-MapiVirtualDirectory -Server ContosoMail</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>These examples return the settings of the MAPI virtual directory on the local server named ContosoMail. All three commands do the same thing.</maml:para>
        <maml:para />
        <maml:para>Get-MapiVirtualDirectory -Identity "ContosoMail\mapi (Default Web Site)"</maml:para>
        <maml:para>Get-MapiVirtualDirectory "mapi (Default Web Site)"</maml:para>
        <maml:para>Get-MapiVirtualDirectory mapi*</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Client Access virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/6837cb55-6734-4a28-9062-7227f57dafb2(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>687309c9-150e-4cdf-9639-3247eb6608a4
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Reset-ProvisioningCache</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>The Reset-ProvisioningCache cmdlet clears the Windows PowerShell provisioning cache of frequently used Active Directory objects. This cmdlet is only used for diagnostic purposes.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Reset</command:verb>
    <command:noun>ProvisioningCache</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Reset-ProvisioningCache</maml:name>
      <command:parameter required="True">
        <maml:name>Application</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CurrentOrganization</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organizations</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CacheKeys</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Reset-ProvisioningCache</maml:name>
      <command:parameter required="True">
        <maml:name>Application</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>GlobalCache</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CacheKeys</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Application</maml:name>
      <maml:description>
        <maml:para>The Application parameter specifies the specific administrative application to reset the provisioning cache for. You can use the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Powershell</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Powershell-LiveId</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Powershell-Proxy</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PowershellLiveId-Proxy</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Ecp</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Psws</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GlobalCache</maml:name>
      <maml:description>
        <maml:para>The GlobalCache switch specifies that all cache keys are cleared.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the fully qualified domain name (FQDN) of the server that the application you want to reset is running on.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CacheKeys</maml:name>
      <maml:description>
        <maml:para>The CacheKeys parameter specifies the value for the cache key that you want to clear. The format for the values should contain 32 digits separated by four dashes: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</maml:para>
        <maml:para>Use the Dump-ProvisioningCache cmdlet to return a list of cache keys.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CurrentOrganization</maml:name>
      <maml:description>
        <maml:para>The CurrentOrganization switch specifies that the provision cache is reset for this organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organizations</maml:name>
      <maml:description>
        <maml:para>The Organizations parameter specifies the organizations that the provisioning cache will be reset. This parameter is used in multi-tenant deployments.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example resets the provisioning cache for Windows PowerShell running on the server EXSRV1.contoso.com in an on-premises Exchange organization and specifies that all cache keys are cleared.</maml:para>
        <maml:para />
        <maml:para>Reset-ProvisioningCache -Server EXSRV1.contoso.com -Application Powershell -GlobalCache</maml:para>
        <maml:para />
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example runs in a multi-tenant deployment by a data center administrator to reset the provisioning cache for Windows PowerShell for the adatum.com tenant and clear all cache keys.</maml:para>
        <maml:para />
        <maml:para>Reset-ProvisioningCache -Application Powershell-Proxy -Server datacenter1.adatum.com -GlobalCache</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Reset-ProvisioningCache cmdlet is for diagnostic purposes only and is rarely used. Exchange administrators need to run this cmdlet only if incorrect links or properties are stamped on newly provisioned recipients, which can be caused by stale data in the provisioning cache. This is a rare occurrence because the provisioning cache has invalidation notification logic.</maml:para>
    <maml:para>The Reset-ProvisioningCache cmdlet clears the Windows PowerShell provisioning cache of frequently used Active Directory objects. To reduce Active Directory requests, a provisioning cache is initialized in each Windows PowerShell runspace and is used to cache common objects that are frequently used by cmdlets and provisioning handlers. During Exchange cmdlet execution, the provisioning cache loads configuration objects from Active Directory to help run a cmdlet. For example, when you create a mailbox, the New-Mailbox cmdlet obtains properties from Active Directory. When running cmdlets, configuration objects such as database containers, administrative role groups, and LegacyDNs are retrieved from Active Directory. Because these types of objects are stable and don't change for months or years after they're created, they're stored in the provisioning cache used by Windows PowerShell. This increases provisioning efficiency and significantly improves cmdlet performance.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Exchange server configuration settings" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/687309c9-150e-4cdf-9639-3247eb6608a4(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>69499195-f08f-41bd-b0ed-443688410b12
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-RMSTrustedPublishingDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-RMSTrustedPublishingDomain cmdlet to view the settings of an existing trusted publishing domain (TPD) in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>RMSTrustedPublishingDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-RMSTrustedPublishingDomain</maml:name>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Default</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RmsTrustedPublishingDomainIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Default</maml:name>
      <maml:description>
        <maml:para>The Default switch filters the results by the default trusted publishing domain. The default trusted publishing domain displays RMS templates and provides rights protection to all new content. There can be only one default trusted publishing domain in an organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the trusted publishing domain. You can use any value that uniquely identifies the trusted publishing domain, for example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">RmsTrustedPublishingDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RmsTrustedPublishingDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all the trusted publishing domains that are configured in your organization and shows detailed information for each trusted publishing domain.</maml:para>
        <maml:para />
        <maml:para>Get-RMSTrustedPublishingDomain | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>A trusted publishing domain contains the settings needed to use RMS features in your organization. For example, users can apply RMS templates to email messages.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/69499195-f08f-41bd-b0ed-443688410b12(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>69d01866-50ff-4ddf-9e7c-d448ff24da69
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-HybridMailflow</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-HybridMailflow cmdlet to configure the message transport settings for the Microsoft Exchange Online Protection (EOP) service in a hybrid deployment.</maml:para>
      <maml:para>The Set-HybridMailflow cmdlet is only used to support hybrid deployments configured with the Hybrid Configuration wizard offered in Microsoft Exchange Server 2010 Service Pack 2 (SP2).</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>HybridMailflow</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-HybridMailflow</maml:name>
      <command:parameter required="False">
        <maml:name>CentralizedTransportEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CertificateSubject</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InboundIPs</maml:name>
        <command:parameterValue required="True">IPRange[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OnPremisesFQDN</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OutboundDomains</maml:name>
        <command:parameterValue required="True">SmtpDomainWithSubdomains[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SecureMailEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>CentralizedTransportEnabled</maml:name>
      <maml:description>
        <maml:para>The CentralizedTransportEnabled parameter specifies that the Exchange Online organization routes all outbound mail messages to external recipients to the on-premises Exchange organization. The on-premises Exchange organization then routes the messages to the external recipients. The valid input for the CentralizedTransportEnabled parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>CertificateSubject</maml:name>
      <maml:description>
        <maml:para>The CertificateSubject parameter specifies the principal name of the certificate used for secure mail flow between the on-premises Exchange and Exchange Online organizations.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="True" position="Named">
      <maml:name>InboundIPs</maml:name>
      <maml:description>
        <maml:para>The InboundIPs parameter specifies the IP addresses of the on-premises mail transport servers configured as part of the hybrid deployment. These must point to either Exchange 2010 SP2 Hub Transport or Edge Transport servers.</maml:para>
      </maml:description>
      <command:parameterValue required="True">IPRange[]</command:parameterValue>
      <dev:type>
        <maml:name>IPRange[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>OnPremisesFQDN</maml:name>
      <maml:description>
        <maml:para>The OnPremisesFQDN parameter specifies the fully qualified domain name (FQDN) of the outbound smart host in the on-premises Exchange organization to use for centralized transport. This is either an on-premises Exchange 2010 SP2 Hub Transport or Edge Transport server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="True" position="Named">
      <maml:name>OutboundDomains</maml:name>
      <maml:description>
        <maml:para>The OutboundDomains parameter specifies SMTP domains configured for the hybrid deployment.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpDomainWithSubdomains[]</command:parameterValue>
      <dev:type>
        <maml:name>SmtpDomainWithSubdomains[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>SecureMailEnabled</maml:name>
      <maml:description>
        <maml:para>The SecureMailEnabled parameter specifies that all messages sent between the on-premises Exchange and the Exchange Online organizations must use the Transport Layer Security (TLS) protocol and the assigned digital certificate. The valid input for the SecureMailEnabled parameter is $true or $false. The default value is $true.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example configures the message transport settings in the EOP service for a hybrid deployment.</maml:para>
        <maml:para />
        <maml:para>Set-HybridMailflow</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Set-HybridMailflow cmdlet supports the configuration of message transport settings for hybrid deployments created with the Hybrid Configuration wizard offered in Exchange 2010 SP2. This cmdlet isn't typically used by administrators; therefore, we strongly recommend that it only be used as part of the hybrid configuration process using the Hybrid Configuration wizard.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Hybrid deployment configuration" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/69d01866-50ff-4ddf-9e7c-d448ff24da69(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>6a4e7267-e3e9-42ec-b1be-7d1d9e2ea40c
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-ConnectSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Remove-ConnectSubscription cmdlet to remove a previously configured contact aggregation subscription between a supported service (for example, Facebook or LinkedIn) and a cloud-based mailbox.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>ConnectSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-ConnectSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the GUID of the contact aggregation subscription you want to remove.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the all previously configured contact aggregation subscriptions and removes all contacts that were aggregated from the previously configured contact aggregation subscription from Outlook Web App.</maml:para>
        <maml:para />
        <maml:para>Remove-ConnectSubscription -Identity &lt;Aggregation subscription identity&gt;</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>When you remove a contact aggregation subscription, all contacts from the supported services are removed from Microsoft Office Outlook Web App. You can't delete a mailbox that has a subscription with a contact aggregation provider until the subscription is removed. If you try to delete a mailbox that has a subscription with a contact aggregation provider, an error message is displayed that the contact subscription must be removed before the mailbox can be deleted.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/6a4e7267-e3e9-42ec-b1be-7d1d9e2ea40c(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>6a8b067b-a070-4c82-80c3-95b267a734c1
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-MessageClassification</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Remove-MessageClassification cmdlet to delete an existing message classification instance from your organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>MessageClassification</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-MessageClassification</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MessageClassificationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the message classification instance that you want to remove. When you specify a name that includes spaces, you must enclose the name in quotation marks ("), for example, "Administrative Name".</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageClassificationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MessageClassificationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the message classification named MyMessageClassification.</maml:para>
        <maml:para />
        <maml:para>Remove-MessageClassification MyMessageClassification</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Message classifications" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/6a8b067b-a070-4c82-80c3-95b267a734c1(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>6d40df36-18c7-46f5-b373-69c840a5599b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-DataClassification</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-DataClassification cmdlet to modify data classification rules that use document fingerprints.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>DataClassification</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-DataClassification</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DataClassificationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Description</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Fingerprints</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsDefault</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Locale</maml:name>
        <command:parameterValue required="True">CultureInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the data classification rule that you want to modify. You can use any value that uniquely identifies the data classification rule. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LocalizedName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Identity GUID value</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">DataClassificationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DataClassificationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Description</maml:name>
      <maml:description>
        <maml:para>The Description parameter specifies a description for the data classification rule. You use the Description parameter with the Locale and Name parameters to specify descriptions for the data classification rule in different languages. The localized values of Description appear in the AllLocalizedDescriptions property of the data classification rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Fingerprints</maml:name>
      <maml:description>
        <maml:para>The Fingerprints parameter specifies the byte-encoded document files that are used as fingerprints by the data classification rule. For instructions on how to import documents to use as templates for fingerprints, see New-Fingerprint or the section. For instructions on how to add and remove document fingerprints from an existing data classification rule, see the section.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsDefault</maml:name>
      <maml:description>
        <maml:para>The IsDefault switch is used with the Locale parameter to specify the default language for the data classification rule. The default Locale value is stored in the DefaultCulture property.</maml:para>
        <maml:para>When you change the default Locale value, the Name value of the data classification rule changes to match the Name value that's associated with the new default locale. The original Name value when the rule was created is permanently stored the LocalizedName property.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Locale</maml:name>
      <maml:description>
        <maml:para>The Locale parameter adds or removes languages that are associated with the data classification rule. Valid input for this parameter is a Microsoft .NET Framework CultureInfo class culture code value. For example, en for English or fr for French.</maml:para>
        <maml:para>Typically, you use the Locale parameter with the Name and Description parameters to add or remove translated names and descriptions for the data classification rule. You can also use the Locale parameter with the IsDefault switch to designate an existing translated name and description as the default. Before you can remove the default translation, you need to set another translation as the default.</maml:para>
      </maml:description>
      <command:parameterValue required="True">CultureInfo</command:parameterValue>
      <dev:type>
        <maml:name>CultureInfo</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a name for the data classification rule. The value must be less than 256 characters.</maml:para>
        <maml:para>You use the Name parameter with the Locale and Description parameters to specify names for the data classification rule in different languages. The localized values of Name appear in the AllLocalizedNames property of the data classification rule.</maml:para>
        <maml:para>The value of the Name parameter is used in the Policy Tip that's presented to users in Outlook Web App. When a translated value of the Name parameter matches the client's language, the Policy Tip is displayed in the client's language. If no translated values of the Name parameter match the client's language, the default translation that's specified by the IsDefault parameter is used for the Policy Tip.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example adds a French translation to the existing data classification rule named "Contoso Confidential", and sets this French translation as the default.</maml:para>
        <maml:para />
        <maml:para>Set-DataClassification "Contoso Confidential" -Locale fr -Name "Contoso Confidentiel" -Description "Ce message contient des informations confidentielles." -IsDefault</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the existing Spanish translation from the data classification rule named "Contoso Confidential".</maml:para>
        <maml:para />
        <maml:para>Set-DataClassification "Contoso Confidential" -Locale es -Name $null -Description $null</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the existing data classification rule named "Contoso Confidential" by adding a new document fingerprint for the file C:\My Documents\Contoso Benefits Template.docx without affecting any existing document fingerprints that are already defined.</maml:para>
        <maml:para />
        <maml:para>$Benefits_Template = Get-Content "C:\My Documents\Contoso Benefits Template.docx" -Encoding byte</maml:para>
        <maml:para>$Benefits_Fingerprint = New-Fingerprint -FileData $Benefits_Template -Description "Contoso Benefits Template"</maml:para>
        <maml:para>$Contoso_Confidential = Get-DataClassification "Contoso Confidential"</maml:para>
        <maml:para>$Array = [System.Collections.ArrayList]($Contoso_Confidential.Fingerprints)</maml:para>
        <maml:para>$Array.Add($Benefits_FingerPrint)</maml:para>
        <maml:para>Set-DataClassification $Contoso_Confidential.Identity -FingerPrints $Array</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 4 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the data classification rule named "Contoso Confidential" by removing an existing document fingerprint without affecting other document fingerprints that are already defined.</maml:para>
        <maml:para />
        <maml:para>First, you need to see the list of document fingerprints in the data classification rule by running the following commands:</maml:para>
        <maml:para />
        <maml:para>$cc = Get-DataClassification "Contoso Confidential"</maml:para>
        <maml:para>$a = [System.Collections.ArrayList]($cc.Fingerprints)</maml:para>
        <maml:para>$a</maml:para>
        <maml:para>The first document fingerprint in the list has the index number 0, the second has the index number 1, and so on. You use the index number to specify the document fingerprint that you want to remove.</maml:para>
        <maml:para />
        <maml:para>To remove the first document fingerprint that's displayed in the list, run the following commands:</maml:para>
        <maml:para />
        <maml:para>$a.RemoveAt(0)</maml:para>
        <maml:para>Set-DataClassification $cc.Identity -FingerPrints $Array</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Classification rule packages are used by data loss prevention (DLP) to detect sensitive content in messages.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/6d40df36-18c7-46f5-b373-69c840a5599b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>6d8babcc-ed3f-4f6a-9b34-e332996dc74a
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-WebServicesVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-WebServicesVirtualDirectory cmdlet to retrieve information in Active Directory for the Exchange Web Services virtual directory from a computer running Microsoft Exchange Server 2013.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>WebServicesVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-WebServicesVirtualDirectory</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADPropertiesOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowBackEndVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowMailboxVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-WebServicesVirtualDirectory</maml:name>
      <command:parameter required="True">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADPropertiesOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowBackEndVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowMailboxVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the name or GUID of the server that hosts the virtual directories that you want to display.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ADPropertiesOnly</maml:name>
      <maml:description>
        <maml:para>The ADPropertiesOnly switch specifies whether to return only the properties about the virtual directory stored in Active Directory. The properties stored in the Internet Information Services (IIS) metabase aren't returned.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the GUID of the server, the name of the website, or the name of the virtual directory that you want to display.</maml:para>
      </maml:description>
      <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>VirtualDirectoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShowBackendVirtualDirectories</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShowMailboxVirtualDirectories</maml:name>
      <maml:description>
        <maml:para>The ShowMailboxVirtualDirectories switch specifies whether the virtual directories on the Mailbox servers within the organization are shown.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns the settings for the Exchange Web Services virtual directory EWS under the default website in IIS.</maml:para>
        <maml:para />
        <maml:para>Get-WebServicesVirtualDirectory -Identity "EWS (Default Web Site)"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example uses the Identity parameter to retrieve all settings for the Exchange Web Services virtual directories on the server CAS01.</maml:para>
        <maml:para />
        <maml:para>Get-WebServicesVirtualDirectory -Identity CAS01</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-WebServicesVirtualDirectory cmdlet can be run on a local server or run remotely if the server name is specified in the Identity or Server parameters. It can also be run without parameters to retrieve the configuration settings from all Microsoft Office Outlook Web App virtual directories on all Internet Information Services (IIS) websites located on the Client Access servers in the organization.</maml:para>
    <maml:para>The Get-WebServicesVirtualDirectory cmdlet can be run on any server that has the Exchange administration tools installed.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Exchange Web Services virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/6d8babcc-ed3f-4f6a-9b34-e332996dc74a(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>6d9139ac-1e96-439d-86f3-7e2ea4d8d914
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-HotmailSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-HotmailSubscription cmdlet to modify the properties of an existing Hotmail subscription configured in a user's cloud-based mailbox.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>HotmailSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-HotmailSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-HotmailSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnablePoisonSubscription</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Password</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-HotmailSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisableAsPoison</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the Hotmail subscription. You can identify the subscription by using one of the following methods:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Specify the globally unique identifier of the subscription, which is its canonical name (CN).</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Use the Mailbox parameter to specify the mailbox that contains the subscription, and then specify the name of the subscription.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can find the identifying values for a Hotmail subscription, such as Identity and Name, by running this command: Get-HotmailSubscription -Mailbox &lt;mailbox&gt;.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisableAsPoison</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplayName</maml:name>
      <maml:description>
        <maml:para>The DisplayName parameter specifies the friendly name of the subscription.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether the Hotmail subscription is enabled. This parameter accepts $true or $false values. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnablePoisonSubscription</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that contains the Hotmail subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Password</maml:name>
      <maml:description>
        <maml:para>The Password parameter specifies the password used to sign in to the Hotmail mailbox. You must specify the value for this parameter in a secure format, for example, (ConvertTo-SecureString -String '&lt;password&gt;' -AsPlainText -Force).</maml:para>
      </maml:description>
      <command:parameterValue required="True">SecureString</command:parameterValue>
      <dev:type>
        <maml:name>SecureString</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies the display name of the Hotmail subscription Contoso Hotmail that's configured in the cloud-based mailbox of the user Ayla Kol.</maml:para>
        <maml:para />
        <maml:para>Set-HotmailSubscription "Contoso Hotmail" -Mailbox "Ayla Kol" -DisplayName "Ayla's Contoso Subscription"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can set properties for the Hotmail subscription, such as the display name and password.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/6d9139ac-1e96-439d-86f3-7e2ea4d8d914(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>70733d70-7e35-4c60-b0f8-47a00b894fd1
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Export-AutoDiscoverConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Export-AutoDiscoverConfig cmdlet to create or update a service connection point for an Autodiscover service pointer in a target Exchange forest on a computer running Microsoft Exchange Server 2013.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Export</command:verb>
    <command:noun>AutoDiscoverConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Export-AutoDiscoverConfig</maml:name>
      <command:parameter required="True">
        <maml:name>TargetForestDomainController</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeleteConfig</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MultipleExchangeDeployments</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PreferredSourceFqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SourceForestCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TargetForestCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetForestDomainController</maml:name>
      <maml:description>
        <maml:para>The TargetForestDomainController parameter specifies the domain controller that you want to export the Autodiscover configuration to.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeleteConfig</maml:name>
      <maml:description>
        <maml:para>The DeleteConfig parameter causes the command to delete your configuration settings on the service connection point object.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MultipleExchangeDeployments</maml:name>
      <maml:description>
        <maml:para>The MultipleExchangeDeployments parameter specifies whether multiple Exchange deployments exist. This setting should be set to $true only if Exchange 2013 is deployed in more than one Active Directory forest, and the forests are connected. If set to $true, the list of authoritative accepted domains for the source forest is written to the Autodiscover service connection point object. Microsoft Outlook 2010 and Office Outlook 2007 clients use this object to select the most appropriate forest to search for the Autodiscover service.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PreferredSourceFqdn</maml:name>
      <maml:description>
        <maml:para>The PreferredSourceFqdn parameter specifies the FQDN of the Active Directory domain for the Autodiscover pointer service connection point object.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SourceForestCredential</maml:name>
      <maml:description>
        <maml:para>The SourceForestCredential parameter specifies the credentials to use when connecting to the source forest.</maml:para>
      </maml:description>
      <command:parameterValue required="True">PSCredential</command:parameterValue>
      <dev:type>
        <maml:name>PSCredential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetForestCredential</maml:name>
      <maml:description>
        <maml:para>The TargetForestCredential parameter specifies the credentials to use to connect to the target forest.</maml:para>
      </maml:description>
      <command:parameterValue required="True">PSCredential</command:parameterValue>
      <dev:type>
        <maml:name>PSCredential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a service connection point object to connect to another Active Directory forest so that Outlook 2010 or Outlook 2007 clients can automatically connect to their mailbox without having to set up a profile.</maml:para>
        <maml:para />
        <maml:para>Export-AutoDiscoverConfig -TargetForestDomainController targetForestName</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example specifies that Exchange 2013 is deployed in more than one Active Directory forest while establishing an Autodiscover service connection point to the target domain controller in another Active Directory forest.</maml:para>
        <maml:para />
        <maml:para>Export-AutoDiscoverConfig -TargetForestDomainController targetForestName -MultipleExchangeDeployments $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Autodiscover service connection point pointer resides in Active Directory and contains the names of the Exchange Web Services URLs.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Autodiscover service configuration settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/70733d70-7e35-4c60-b0f8-47a00b894fd1(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>721a0666-1830-4072-9aff-1b54ee53080b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-EdgeSyncServiceConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-EdgeSyncServiceConfig cmdlet to create edge synchronization service settings that control the general synchronization behavior shared by all EdgeSync services.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>EdgeSyncServiceConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-EdgeSyncServiceConfig</maml:name>
      <command:parameter required="False">
        <maml:name>ConfigurationSyncInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CookieValidDuration</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FailoverDCInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LockDuration</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LockRenewalDuration</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogLevel</maml:name>
        <command:parameterValue required="True">None | Low | Medium | High</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogMaxAge</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogMaxDirectorySize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogMaxFileSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LogPath</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OptionDuration</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientSyncInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Site</maml:name>
        <command:parameterValue required="True">AdSiteIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConfigurationSyncInterval</maml:name>
      <maml:description>
        <maml:para>The ConfigurationSyncInterval parameter specifies how frequently the EdgeSync service synchronizes configuration data. The default value is 3 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CookieValidDuration</maml:name>
      <maml:description>
        <maml:para>The CookieValidDuration parameter specifies how long a cookie record is valid. The default value is 21 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FailoverDCInterval</maml:name>
      <maml:description>
        <maml:para>The FailoverDCInterval parameter specifies how long EdgeSync waits before failing over to another domain controller if it can't read configuration data from Active Directory. The default value is 5 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LockDuration</maml:name>
      <maml:description>
        <maml:para>The LockDuration parameter specifies how long an instance of the EdgeSync service can maintain an exclusive lock on the synchronization rights. While an EdgeSync service maintains an exclusive lock on synchronization rights, no other EdgeSync service can take over synchronization. The default value is 6 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LockRenewalDuration</maml:name>
      <maml:description>
        <maml:para>The LockRenewalDuration parameter specifies how long before the expiry of an exclusive lock an EdgeSync service can renew the lock. The default value is 4 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogEnabled</maml:name>
      <maml:description>
        <maml:para>The LogEnabled parameter enables or disables the EdgeSync log. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogLevel</maml:name>
      <maml:description>
        <maml:para>The LogLevel parameter specifies the EdgeSync logging level. Valid values for this parameter are None, Low, Medium and High. The default value is None.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Low | Medium | High</command:parameterValue>
      <dev:type>
        <maml:name>None | Low | Medium | High</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogMaxAge</maml:name>
      <maml:description>
        <maml:para>The LogMaxAge parameter specifies the maximum duration in days to keep the EdgeSyncLog files. Log files older than the specified value can be overwritten. The default value is 30 days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogMaxDirectorySize</maml:name>
      <maml:description>
        <maml:para>The LogMaxDirectorySize parameter specifies the maximum amount of disk space the EdgeSyncLog directory can use. The default value is 250 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the LogMaxFileSize parameter must be less than or equal to the value of the LogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the EdgeSyncLLog directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogMaxFileSize</maml:name>
      <maml:description>
        <maml:para>The LogMaxFileSize parameter specifies the maximum log file size for the EdgeSyncLog files. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The value of the LogMaxFileSize parameter must be less than or equal to the value of the LogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the EdgeSyncLog files.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LogPath</maml:name>
      <maml:description>
        <maml:para>The LogPath parameter specifies the default location for the EdgeSyncLog files. The default value is TransportRoles\Logs\EdgeSync\.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OptionDuration</maml:name>
      <maml:description>
        <maml:para>The OptionDuration parameter specifies how long an instance of the EdgeSync service can maintain an optional lock on synchronization rights. While an EdgeSync service maintains an optional lock on synchronization rights, another EdgeSync service can take over synchronization after the optional lock has expired if it's initiated using the Start-EdgeSynchronization command. The default value is 30 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientSyncInterval</maml:name>
      <maml:description>
        <maml:para>The RecipientSyncInterval parameter specifies how frequently the EdgeSync service synchronizes recipient data from the global catalog. The default value is 5 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Site</maml:name>
      <maml:description>
        <maml:para>The Site parameter specifies the Active Directory site that EdgeSync connects to for synchronizing configuration and recipient data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AdSiteIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AdSiteIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates EdgeSync service settings with the following configuration:</maml:para>
        <maml:para />
        <maml:para>EdgeSync logging is enabled.</maml:para>
        <maml:para>The log files are stored in the EdgeSyncLog share on Server01.</maml:para>
        <maml:para>The maximum individual log file size is 5 megabytes (MB).</maml:para>
        <maml:para>The log files are kept for 3 days.</maml:para>
        <maml:para>New-EdgeSyncServiceConfig -LogEnabled $true -LogPath "\\Server01\EdgeSyncLog" -LogMaxFileSize 5MB -LogMaxAge 3</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "EdgeSync" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/721a0666-1830-4072-9aff-1b54ee53080b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>73b1fd66-2783-4b8c-a704-9dc8ec810f29
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-AuthRedirect</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-AuthRedirect cmdlet to modify the existing OAuth redirection settings for Microsoft Exchange 2010 Client Access servers in your Microsoft Exchange 2013 organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>AuthRedirect</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-AuthRedirect</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AuthRedirectIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TargetUrl</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the existing OAuth redirection object that you want to modify. The object name uses the syntax AuthRedirect-Bearer-&lt;GUID&gt;. The easiest way to find the name of the OAuth redirection object is to run Get-AuthRedirect.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AuthRedirectIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AuthRedirectIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetUrl</maml:name>
      <maml:description>
        <maml:para>The TargetUrl parameter specifies the FQDN of the Exchange 2013 Client Access server that will process the Oauth request.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the TargetURL value to http://cas01.contoso.com for the existing OAuth redirection object named AuthRedirect-Bearer-C0B7AC3F-FE64-4B4B-A907-9226F8027CCE.</maml:para>
        <maml:para />
        <maml:para>Set-AuthRedirect AuthRedirect-Bearer-C0B7AC3F-FE64-4B4B-A907-9226F8027CCE -TargetUrl http://cas01.contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example is the same as the first example. However, if you have only one authentication redirection object in your organization, you can use Get-AuthRedirect to pipe the Identity value to the Set-AuthRedirect cmdlet.</maml:para>
        <maml:para />
        <maml:para>Get-AuthRedirect | Set-AuthRedirect -TargetUrl http://cas01.contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "OAuth authentication redirection settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/73b1fd66-2783-4b8c-a704-9dc8ec810f29(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>73f0ce87-e723-43e5-a32c-29cd2d899ff9
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Test-PopConnectivity</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Test-PopConnectivity cmdlet to verify that the POP3 service is running as expected. The Test-PopConnectivity cmdlet can be used to test the POP3 functionality for a specified Client Access server for all mailboxes on servers running Microsoft Exchange Server 2013 in the same Active Directory site.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Test</command:verb>
    <command:noun>PopConnectivity</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Test-PopConnectivity</maml:name>
      <command:parameter required="False">
        <maml:name>ClientAccessServer</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionType</maml:name>
        <command:parameterValue required="True">Plaintext | Tls | Ssl</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PerConnectionTimeout</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PortClientAccessServer</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TrustAnySSLCertificate</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LightMode</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxServer</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MonitoringContext</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResetTestAccountCredentials</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Timeout</maml:name>
        <command:parameterValue required="True">UInt32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UserType</maml:name>
        <command:parameterValue required="True">LEGACY | EDU | BPOS</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>ClientAccessServer</maml:name>
      <maml:description>
        <maml:para>The ClientAccessServer parameter specifies the name of the Client Access server to test.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectionType</maml:name>
      <maml:description>
        <maml:para>The ConnectionType parameter specifies the type of connection used to connect to the Client Access server. This setting can be set to Plaintext, Tls, or Ssl.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Plaintext | Tls | Ssl</command:parameterValue>
      <dev:type>
        <maml:name>Plaintext | Tls | Ssl</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LightMode</maml:name>
      <maml:description>
        <maml:para>The LightMode parameter instructs the command to perform only a test logon to the server using the POP3 protocol. If you don't use this parameter, the test also tests the sending and receiving of a message using the POP3 protocol.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxCredential</maml:name>
      <maml:description>
        <maml:para>The MailboxCredential parameter specifies the mailbox credential for a single mailbox test.</maml:para>
      </maml:description>
      <command:parameterValue required="True">PSCredential</command:parameterValue>
      <dev:type>
        <maml:name>PSCredential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxServer</maml:name>
      <maml:description>
        <maml:para>The MailboxServer parameter specifies the name of the Mailbox server to test. If not specified, all Mailbox servers in the local Active Directory site are tested.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MonitoringContext</maml:name>
      <maml:description>
        <maml:para>The MonitoringContext switch includes the associated monitoring events and performance counters in the results. You don't need to specify a value with this switch. Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager 2007 or System Center 2012 - Operations Manager.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PerConnectionTimeout</maml:name>
      <maml:description>
        <maml:para>The PerConnectionTimeout parameter specifies the amount of time, in seconds, to wait per connection for the test operation to finish. The default value for the PerConnectionTimeout parameter is 120 seconds. You must specify a time-out value greater than 0 seconds and less than 120 seconds. We recommend that you configure this parameter with a value of 5 seconds or more.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PortClientAccessServer</maml:name>
      <maml:description>
        <maml:para>The PortClientAccessServer parameter specifies the port to use to connect to the Client Access server. The default port is 110 for POP3. The valid range is from 0 through 65,535.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResetTestAccountCredentials</maml:name>
      <maml:description>
        <maml:para>The ResetTestAccountCredentials switch resets the password for the test account that's used to run this command. The password for the test account is typically reset every seven days. Use this switch to force a password reset any time it's required for security reasons.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Timeout</maml:name>
      <maml:description>
        <maml:para>The Timeout parameter specifies the amount of time, in seconds, to wait for the test operation to finish. The default value for the Timeout parameter is 180 seconds. You must specify a time-out value greater than 0 seconds and less than 1 hour (3,600 seconds). We recommend that you configure this parameter with a value of 5 seconds or more.</maml:para>
      </maml:description>
      <command:parameterValue required="True">UInt32</command:parameterValue>
      <dev:type>
        <maml:name>UInt32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TrustAnySSLCertificate</maml:name>
      <maml:description>
        <maml:para>The TrustAnySSLCertificate parameter specifies whether Secure Sockets Layer (SSL) certificate validation failures are reported. This parameter instructs the command to check the POP3 service without generating an error when the certificate doesn't match the URL of the Client Access server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UserType</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LEGACY | EDU | BPOS</command:parameterValue>
      <dev:type>
        <maml:name>LEGACY | EDU | BPOS</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example tests the POP3 connectivity for the Client Access server Contoso12 by using the credentials for the user contoso\kweku.</maml:para>
        <maml:para />
        <maml:para>Test-PopConnectivity -ClientAccessServer:Contoso12 -MailboxCredential:(Get-Credential contoso\kweku)</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example tests the POP3 connectivity of the specific Client Access server Contoso12 and tests all Exchange mailboxes.</maml:para>
        <maml:para />
        <maml:para>Test-PopConnectivity -ClientAccessServer:Contoso12</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Test POP3 settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/73f0ce87-e723-43e5-a32c-29cd2d899ff9(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>751fe9b7-7529-4bbf-a20e-3defff6cfb16
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-HybridMailflow</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-HybridMailflow cmdlet to view the message transport settings for a hybrid deployment.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>HybridMailflow</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-HybridMailflow</maml:name>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns the message transport settings for the hybrid deployment.</maml:para>
        <maml:para />
        <maml:para>Get-HybridMailflow</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-HybridMailflow cmdlet is used to view the configuration of message transport settings for hybrid deployments created with the Hybrid Configuration wizard offered in Service Pack 2 of Exchange Server 2010.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Hybrid deployment configuration" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/751fe9b7-7529-4bbf-a20e-3defff6cfb16(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>778b4b91-0079-462b-b58d-3b3507ed8f69
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-RMSTrustedPublishingDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Remove-RMSTrustedPublishingDomain cmdlet to remove an existing trusted publishing domain (TPD) from your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>RMSTrustedPublishingDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-RMSTrustedPublishingDomain</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RmsTrustedPublishingDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the trusted publishing domain. You can use any value that uniquely identifies the trusted publishing domain, for example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">RmsTrustedPublishingDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RmsTrustedPublishingDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force parameter forces the command to execute without asking for user confirmation.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the trusted publishing domain Contoso TPD from your organization.</maml:para>
        <maml:para />
        <maml:para>Remove-RMSTrustedPublishingDomain "Contoso TPD"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>A trusted publishing domain contains the settings needed to use Rights Management Services (RMS) features in your organization. When you delete a trusted publishing domain, all existing content that's protected by the RMS templates in the trusted publishing domain becomes unreadable. Instead of deleting the trusted publishing domain, you can archive the RMS templates using the Set-RMSTemplate cmdlet. Archiving the RMS template prevents future use for encryption, but allows access to existing rights-protected content.</maml:para>
    <maml:para>If you delete the only trusted publishing domain, all RMS features are disabled in the organization. If multiple trusted publishing domains exist in your organization, you can't delete the default trusted publishing domain. You must first designate another trusted publishing domain as the default. You can change the default trusted publishing domain using the Set-RMSTrustedPublishingDomain cmdlet.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/778b4b91-0079-462b-b58d-3b3507ed8f69(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>79bedc01-7b50-4127-ba54-06bf55c3f43d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-AcceptedDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-AcceptedDomain cmdlet to remove an accepted domain. When you remove an accepted domain, the accepted domain object is deleted.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>AcceptedDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-AcceptedDomain</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the accepted domain you want to remove. Enter either the GUID or the name of the remote domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AcceptedDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the accepted domain Contoso.</maml:para>
        <maml:para />
        <maml:para>Remove-AcceptedDomain Contoso</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Accepted domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/79bedc01-7b50-4127-ba54-06bf55c3f43d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>7b315ab0-8778-4835-a252-fb94129d7a8e
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-SendConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-SendConnector cmdlet to create a new Send connector.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>SendConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-SendConnector</maml:name>
      <command:parameter required="True">
        <maml:name>AddressSpaces</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsScopedConnector</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AuthenticationCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CloudServicesMailEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionInactivityTimeOut</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Custom</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DNSRoutingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainSecureEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ErrorPolicies</maml:name>
        <command:parameterValue required="True">Default | DowngradeDnsFailures | DowngradeCustomFailures | UpgradeCustomFailures</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForceHELO</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Fqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FrontendProxyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreSTARTTLS</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Internal</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Internet</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Partner</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Port</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireOorg</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireTLS</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmartHostAuthMechanism</maml:name>
        <command:parameterValue required="True">None | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmartHosts</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmtpMaxMessagesPerConnection</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SourceIPAddress</maml:name>
        <command:parameterValue required="True">IPAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SourceTransportServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsAuthLevel</maml:name>
        <command:parameterValue required="True">EncryptionOnly | CertificateValidation | DomainValidation</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsCertificateName</maml:name>
        <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsDomain</maml:name>
        <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Usage</maml:name>
        <command:parameterValue required="True">Custom | Internal | Internet | Partner</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UseExternalDNSServersEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddressSpaces</maml:name>
      <maml:description>
        <maml:para>The AddressSpaces parameter specifies the domain names to which the Send connector routes mail. The complete syntax for entering each address space is as follows: &lt;AddressSpaceType&gt;:&lt;AddressSpace&gt;;&lt;AddressSpaceCost&gt;</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AddressSpaceType: On an Edge server, the address space type must be SMTP. In the Transport service on a Mailbox server, the address space type may be SMTP, X400, or any other text string. If you omit the address space type, SMTP is assumed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AddressSpace: For SMTP address space types, the address space that you enter must be RFC 1035-compliant. For example, *, *.com, and *.contoso.com are permitted, but *contoso.com is not. For X.400 address space types, the address space that you enter must be RFC 1685-compliant, such as o=MySite;p=MyOrg;a=adatum;c=us. For all other values of address space type, you can enter any text for the address space.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AddressSpaceCost: The valid input range for the cost is from 1 through 100. A lower cost indicates a better route. This parameter is optional. If you omit the address space cost, a cost of 1 is assumed. If you enter a non-SMTP address space that contains the semicolon character (;), you must specify the address space cost.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify the address space type or the address space cost, you must enclose the address space in quotation marks ("). For example, the following address space entries are equivalent:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>"SMTP:contoso.com;1"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>"contoso.com;1"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>"SMTP:contoso.com"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>contoso.com</maml:para>
        </command:listItem></command:list>
        <maml:para>You may specify multiple address spaces by separating the address spaces with commas, for example: contoso.com,fabrikam.com. If you specify the address space type or the address space cost, enclose the address space in quotation marks ("), for example: "contoso.com;2","fabrikam.com;3".</maml:para>
        <maml:para>If you specify a non-SMTP address space type on a Send connector configured in the Transport service on a Mailbox server, you must configure the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>The SmartHosts parameter must be set to a value that specifies a smart host.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The DNSRoutingEnabled parameter must be set to $false.</maml:para>
        </command:listItem></command:list>
        <maml:para>Although you can configure non-SMTP address spaces on a Send connector in the Transport service on a Mailbox server, the Send connector uses SMTP as the transport mechanism to send messages to other messaging servers. Foreign connectors in the Transport service on a Mailbox server are used to send messages to local messaging servers, such as third-party fax gateway servers, which don't use SMTP as their primary transport mechanism. For more information, see Foreign connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a descriptive name for the connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AuthenticationCredential</maml:name>
      <maml:description>
        <maml:para>The AuthenticationCredential parameter specifies a credential object. This credential object is created by using the Get-Credential cmdlet. For more information about the Get-Credential cmdlet, enter Get-Help Get-Credential in the Exchange Management Shell.</maml:para>
      </maml:description>
      <command:parameterValue required="True">PSCredential</command:parameterValue>
      <dev:type>
        <maml:name>PSCredential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CloudServicesMailEnabled</maml:name>
      <maml:description>
        <maml:para>Set to $true to enable this connector to send messages to the cloud service.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comment</maml:name>
      <maml:description>
        <maml:para>The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectionInactivityTimeOut</maml:name>
      <maml:description>
        <maml:para>The ConnectionInactivityTimeOut parameter specifies the maximum time an idle connection can remain open. The default value is ten minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify fifteen minutes, set it to 00:15:00. The valid input range for this parameter is 00:00:01 to 1.00:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Custom</maml:name>
      <maml:description>
        <maml:para>The Custom parameter specifies the Custom usage type. The usage type specifies the permissions and authentication methods assigned to the Send connector. If you use the Custom parameter, you can't use any of the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internet</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Usage</maml:para>
        </command:listItem></command:list>
        <maml:para>For more information about Send connector usage types, permissions, and authentication methods, see Send connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DNSRoutingEnabled</maml:name>
      <maml:description>
        <maml:para>The DNSRoutingEnabled parameter specifies whether the Send connector uses Domain Name System (DNS) to route mail. Valid values for this parameter are $true or $false. The default value is $true. If you specify a SmartHosts parameter, the DNSRoutingEnabled parameter must be $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainSecureEnabled</maml:name>
      <maml:description>
        <maml:para>The DomainSecureEnabled parameter enables mutual Transport Layer Security (TLS) authentication for the domains serviced by the Send connector when set to $true. Mutual TLS authentication functions correctly only if the following conditions are met:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>DomainSecureEnabled is set to $true.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DNSRoutingEnabled is set to $true.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>IgnoreSTARTTLS is set to $false.</maml:para>
        </command:listItem></command:list>
        <maml:para>The wildcard character (*) isn't supported in domains configured for mutual TLS authentication. The same domain must also be defined on the corresponding Receive connector, and in the value of the TLSReceiveDomainSecureList attribute of the transport configuration.</maml:para>
        <maml:para>The default value for the DomainSecureEnabled parameter is $false for the following types of Send connectors:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Those defined in the Transport service on a Mailbox server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User-created Send connectors defined on an Edge server.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is $true for a default Send connector defined on an Edge server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether to enable the Send connector to process email messages. Valid values are $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ErrorPolicies</maml:name>
      <maml:description>
        <maml:para>The ErrorPolicies parameter specifies how communication errors are treated. Possible values are the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Default A non-delivery report (NDR) is generated for communication errors.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DowngradeDnsFailures All DNS errors are treated as transient.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DowngradeCustomFailures Particular SMTP errors are treated as transient.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>UpgradeCustomFailures Custom transient failures are upgraded and treated as permanent failures.</maml:para>
        </command:listItem></command:list>
        <maml:para>Multiple values can be specified for this parameter, separated by commas.</maml:para>
        <maml:para>Specify a value other than Default for this parameter only if this Send connector is used to send messages over a reliable and well-defined communication channel where communication errors aren't expected. For example, consider specifying a value other than Default if this Send connector is used to send messages to a partner.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Default | DowngradeDnsFailures | DowngradeCustomFailures | UpgradeCustomFailures</command:parameterValue>
      <dev:type>
        <maml:name>Default | DowngradeDnsFailures | DowngradeCustomFailures | UpgradeCustomFailures</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress warning or confirmation messages. This switch can be used when the task is run programmatically and prompting for administrative input is inappropriate. If the Force switch isn't provided in the command, you're prompted for administrative input. You don't have to specify a value with this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ForceHELO</maml:name>
      <maml:description>
        <maml:para>The ForceHELO parameter specifies whether HELO is sent instead of the default EHLO. Valid values are $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Fqdn</maml:name>
      <maml:description>
        <maml:para>The Fqdn parameter specifies the FQDN used as the source server for connected messaging servers that use the Send connector to receive outgoing messages. The value of this parameter is displayed to connected messaging servers whenever a source server name is required, as in the following examples:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>In the EHLO/HELO command when the Send connector communicates with the next hop messaging server</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>In the most recent Received header field added to the message by the next hop messaging server after the message leaves the Transport service on a Mailbox server or an Edge server</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>During TLS authentication</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value of the Fqdn parameter is $null. This means the default FQDN value is the FQDN of the Mailbox server or Edge server that contains the Send connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FrontendProxyEnabled</maml:name>
      <maml:description>
        <maml:para>The FrontendProxyEnabled parameter routes outbound messages through the CAS server, where destination specific routing, such as DNS or IP address, is set, when the parameter is set to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreSTARTTLS</maml:name>
      <maml:description>
        <maml:para>The IgnoreSTARTTLS parameter specifies whether to ignore the StartTLS option offered by a remote sending server. This parameter is used with remote domains. This parameter must be set to $false if the RequireTLS parameter is set to $true. Valid values for this parameter are $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Internal</maml:name>
      <maml:description>
        <maml:para>The Internal parameter specifies the Internal usage type. The usage type specifies the permissions and authentication methods assigned to the Send connector. If you use the Internal parameter, you can't use any of the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Custom</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internet</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Usage</maml:para>
        </command:listItem></command:list>
        <maml:para>For more information about Send connector usage types, permissions, and authentication methods, see Send connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Internet</maml:name>
      <maml:description>
        <maml:para>The Internet parameter specifies the Internet usage type. The usage type specifies the permissions and authentication methods assigned to the Send connector. If you use the Internet parameter, you can't use any of the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Custom</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Usage</maml:para>
        </command:listItem></command:list>
        <maml:para>For more information about Send connector usage types, permissions, and authentication methods, see Send connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsScopedConnector</maml:name>
      <maml:description>
        <maml:para>The IsScopedConnector parameter specifies the availability of the connector to other Mailbox servers with the Transport service. When the value of this parameter is $false, the connector can be used by all Mailbox servers in the Exchange organization. When the value of this parameter is $true, the connector can only be used by Transport service on Mailbox servers in the same Active Directory site. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxMessageSize</maml:name>
      <maml:description>
        <maml:para>The MaxMessageSize parameter specifies the maximum size of a message that can pass through a connector. The default value is 25 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>Values entered in bytes are rounded up to nearest kilobyte. The valid input range for this parameter is 0 to 2147483647 bytes. To remove the message size limit on a Send connector, enter a value of unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Partner</maml:name>
      <maml:description>
        <maml:para>The Partner parameter specifies the Partner usage type. The usage type specifies the permissions and authentication methods assigned to the Send connector. If you use the Partner parameter, you can't use any of the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Custom</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internet</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Usage</maml:para>
        </command:listItem></command:list>
        <maml:para>For more information about Send connector usage types, permissions, and authentication methods, see Send connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Port</maml:name>
      <maml:description>
        <maml:para>The Port parameter specifies the port number for smart host forwarding, if you specify a value in the SmartHosts parameter. The valid input range is an integer from 0 through 65535. The default value is 25. In most organizations, the port number is set to 25.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProtocolLoggingLevel</maml:name>
      <maml:description>
        <maml:para>The ProtocolLoggingLevel parameter specifies whether to enable protocol logging. Verbose enables protocol logging. None disables protocol logging. The location of the Send connector protocol logs for all Send connectors configured in the Transport service on a Mailbox server or on an Edge server is specified with the SendProtocolLogPath parameter of the Set-TransportService cmdlet.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>None | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequireOorg</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequireTLS</maml:name>
      <maml:description>
        <maml:para>The RequireTLS parameter specifies whether all messages sent through this connector must be transmitted using TLS. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmartHostAuthMechanism</maml:name>
      <maml:description>
        <maml:para>The SmartHostAuthMechanism parameter specifies the smart host authentication mechanism to use for authentication with a remote server. Use this parameter only when a smart host is configured and the DNSRoutingEnabled parameter is set to $false. Valid values are None, BasicAuth, BasicAuthRequireTLS, ExchangeServer, and ExternalAuthoritative. All values are mutually exclusive. If you select BasicAuth or BasicAuthRequireTLS, you must use the AuthenticationCredential parameter to specify the authentication credential.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      <dev:type>
        <maml:name>None | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmartHosts</maml:name>
      <maml:description>
        <maml:para>The SmartHosts parameter specifies the smart hosts the Send connector uses to route mail. This parameteris required if you set the DNSRoutingEnabled parameter to $false and it must be specified on the same command line. The SmartHosts parameter takes one or more FQDNs, such as server.contoso.com, or one or more IP addresses, or a combination of both FQDNs and IP addresses. If you enter an IP address, you must enter the IP address as a literal. For example, 10.10.1.1. The smart host identity can be the FQDN of a smart-host server, a mail exchanger (MX) record, or an address (A) record. If you configure an FQDN as the smart host identity, the source server for the Send connector must be able to use DNS name resolution to locate the smart-host server.</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmtpMaxMessagesPerConnection</maml:name>
      <maml:description>
        <maml:para>The SmtpMaxMessagesPerConnection parameter specifies the maximum number of messages the server can send per connection.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SourceIPAddress</maml:name>
      <maml:description>
        <maml:para>The SourceIPAddress parameter specifies the local IP address to use as the endpoint for an SMTP connection to a remote messaging server. The default IP address is 0.0.0.0. This value means that the server can use any available local IP address. This parameter is valid only for Send connectors configured on an Edge server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">IPAddress</command:parameterValue>
      <dev:type>
        <maml:name>IPAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SourceTransportServers</maml:name>
      <maml:description>
        <maml:para>The SourceTransportServers parameter specifies the names of the Mailbox servers that can use this Send connector. This parameter isn't valid for Send connectors configured on an Edge server.</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsAuthLevel</maml:name>
      <maml:description>
        <maml:para>The TlsAuthLevel parameter specifies the TLS authentication level that is used for outbound TLS connections established by this Send connector. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>EncryptionOnly: TLS is used only to encrypt the communication channel. No certificate authentication is performed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>CertificateValidation: TLS is used to encrypt the channel and certificate chain validation and revocation lists checks are performed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DomainValidation: In addition to channel encryption and certificate validation, the Send connector also verifies that the FQDN of the target certificate matches the domain specified in the TlsDomain parameter. If no domain is specified in the TlsDomain parameter, the FQDN on the certificate is compared with the recipient's domain.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can't specify a value for this parameter if the IgnoreSTARTTLS parameter is set to $true, or if the RequireTLS parameter is set to $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EncryptionOnly | CertificateValidation | DomainValidation</command:parameterValue>
      <dev:type>
        <maml:name>EncryptionOnly | CertificateValidation | DomainValidation</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsCertificateName</maml:name>
      <maml:description>
        <maml:para>The TlsCertificateName parameter specifies the X.509 certificate to use with TLS sessions and secure mail. Valid input for this parameter is [I]Issuer[S]Subject. The Issuer value is found in the certificate's Issuer field, and the Subject value is found in the certificate's Subject field. You can find these values by running the Get-ExchangeCertificate cmdlet.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      <dev:type>
        <maml:name>SmtpX509Identifier</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsDomain</maml:name>
      <maml:description>
        <maml:para>The TlsDomain parameter specifies the domain name that the Send connector uses to verify the FQDN of the target certificate when establishing a TLS secured connection.</maml:para>
        <maml:para>This parameter is used only if the TlsAuthLevel parameter is set to DomainValidation.</maml:para>
        <maml:para>A value for this parameter is required if:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>The TLSAuthLevel parameter is set to DomainValidation.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The DNSRoutingEnabled parameter is set to $false (smart host Send connector).</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">SmtpDomainWithSubdomains</command:parameterValue>
      <dev:type>
        <maml:name>SmtpDomainWithSubdomains</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Usage</maml:name>
      <maml:description>
        <maml:para>The Usage parameter specifies the default permissions and authentication methods assigned to the Send connector. The valid values are as follows: Custom, Internal, Internet, or Partner. The default is Custom.</maml:para>
        <maml:para>If you use the Usage parameter, you can't use any of the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Custom</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internet</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner</maml:para>
        </command:listItem></command:list>
        <maml:para>For more information about Send connector usage types, permissions, and authentication methods, see Send connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Custom | Internal | Internet | Partner</command:parameterValue>
      <dev:type>
        <maml:name>Custom | Internal | Internet | Partner</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UseExternalDNSServersEnabled</maml:name>
      <maml:description>
        <maml:para>The UseExternalDNSServersEnabled parameter specifies whether this Send connector uses the external DNS list specified by the ExternalDNSServers parameter of the Set-TransportService cmdlet. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the Send connector named MySendConnector with the following properties:</maml:para>
        <maml:para />
        <maml:para>It sends email messages over the Internet.</maml:para>
        <maml:para>It processes messages addressed only to Contoso.com and Fabrikam.com domains.</maml:para>
        <maml:para>New-SendConnector -Internet -Name MySendConnector -AddressSpaces contoso.com,fabrikam.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the Send connector Secure Email to Contoso.com with the following properties:</maml:para>
        <maml:para />
        <maml:para>It processes messages only for the Contoso.com domain.</maml:para>
        <maml:para>It uses Basic authentication.</maml:para>
        <maml:para>It uses a specific authentication credential.</maml:para>
        <maml:para>To assign a specific authentication credential for the Send connector, you must first run the Get-Credential command and store the user input in a temporary variable. When you run the Get-Credential command, the command asks for the user name and password of the account used during authentication with the Contoso.com email server. The temporary variable can then be used in the New-SendConnector cmdlet to create the new connector.</maml:para>
        <maml:para />
        <maml:para>$CredentialObject = Get-Credential</maml:para>
        <maml:para>New-SendConnector -Name "Secure Email to Contoso.com" -AddressSpaces contoso.com -AuthenticationCredential $CredentialObject -SmartHostAuthMechanism BasicAuth</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Send connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/7b315ab0-8778-4835-a252-fb94129d7a8e(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>7c17847a-310e-45df-8c0c-58b4297e6f8d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-RemoteDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Remove-RemoteDomain cmdlet to remove a remote domain. When you remove a remote domain, the remote domain object is deleted. Removing a remote domain doesn't disable mail flow to that domain.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>RemoteDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-RemoteDomain</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RemoteDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the remote domain you want to remove. Enter either the GUID or name of the remote domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RemoteDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RemoteDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the remote domain object named Contoso.</maml:para>
        <maml:para />
        <maml:para>Remove-RemoteDomain Contoso</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Remote domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/7c17847a-310e-45df-8c0c-58b4297e6f8d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>7c5e7a0f-9c9d-4863-bab8-bcc729cc16a6
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Import-RMSTrustedPublishingDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Import-RMSTrustedPublishingDomain cmdlet to import a trusted publishing domain (TPD) from an on-premises server running Active Directory Rights Management Services (AD RMS) or from RMS Online into your cloud-based organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Import</command:verb>
    <command:noun>RMSTrustedPublishingDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Import-RMSTrustedPublishingDomain</maml:name>
      <command:parameter required="True">
        <maml:name>ExtranetLicensingUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>FileData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>IntranetLicensingUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Password</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Default</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Import-RMSTrustedPublishingDomain</maml:name>
      <command:parameter required="True">
        <maml:name>FileData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Password</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RefreshTemplates</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Default</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Import-RMSTrustedPublishingDomain</maml:name>
      <command:parameter required="True">
        <maml:name>ExtranetLicensingUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>FileData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>IntranetLicensingUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Password</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtranetCertificationUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IntranetCertificationUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Default</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Import-RMSTrustedPublishingDomain</maml:name>
      <command:parameter required="True">
        <maml:name>RMSOnline</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RefreshTemplates</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RMSOnlineAuthCertSubjectNameOverride</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RMSOnlineOrgOverride</maml:name>
        <command:parameterValue required="True">Guid</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Default</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Import-RMSTrustedPublishingDomain</maml:name>
      <command:parameter required="True">
        <maml:name>RMSOnlineConfig</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>RMSOnlineKeys</maml:name>
        <command:parameterValue required="True">Hashtable</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RMSOnlineAuthorTest</maml:name>
        <command:parameterValue required="True">Hashtable</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Default</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtranetLicensingUrl</maml:name>
      <maml:description>
        <maml:para>The ExtranetLicensingUrl parameter specifies the external licensing URL of the on-premises AD RMS server that's stamped into the publishing license. The publishing license specifies the users that can open the rights-protected content, under which conditions the content may be opened by the user, and the rights that each user will have to the rights-protected content.</maml:para>
        <maml:para>By default, the value of the ExtranetLicensingUrl parameter is https://&lt;FQDN&gt;/_wmcs/licensing.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FileData</maml:name>
      <maml:description>
        <maml:para>The FileData parameter specifies the XML file you want to import. The XML file contains the TPD you exported from the on-premises AD RMS server.</maml:para>
        <maml:para>You need to read the file to a byte-encoded object using the Get-Content cmdlet, for example, -FileData $([byte[]](Get-Content -Encoding byte -Path "C:\My Documents\contoso.xml" -ReadCount 0)).</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IntranetLicensingUrl</maml:name>
      <maml:description>
        <maml:para>The IntranetLicensingUrl parameter specifies the internal licensing URL of the on-premises AD RMS server that's stamped into the publishing license. The publishing license specifies the users that can open the rights-protected content, under which conditions the content may be opened by the user, and the rights that each user will have to the rights-protected content.</maml:para>
        <maml:para>By default, the value of the IntranetLicensingUrl parameter is https://&lt;server name&gt;/_wmcs/licensing.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the name of the TPD. If you use the RefreshTemplates parameter, the value must match the name of the previously imported TPD.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Password</maml:name>
      <maml:description>
        <maml:para>The Password parameter specifies the password of the TPD that you want to import. You must specify the value for this parameter in a secure format, for example, (ConvertTo-SecureString -String '&lt;password&gt;' -AsPlainText -Force).</maml:para>
        <maml:para>The password value must match the password in the XML file when you exported the TPD from the on-premises AD RMS server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SecureString</command:parameterValue>
      <dev:type>
        <maml:name>SecureString</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RMSOnline</maml:name>
      <maml:description>
        <maml:para>The RMSOnline switch specifies that the TPD is imported from RMS Online. This parameter is only available in Microsoft Exchange Online organizations.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RMSOnlineConfig</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RMSOnlineKeys</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Hashtable</command:parameterValue>
      <dev:type>
        <maml:name>Hashtable</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Default</maml:name>
      <maml:description>
        <maml:para>The Default parameter specifies that this is the default TPD. The default TPD displays RMS templates and provides rights protection to all new content. There can be only one default TPD in an organization.</maml:para>
        <maml:para>The first TPD you import into your organization is automatically set as the default.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtranetCertificationUrl</maml:name>
      <maml:description>
        <maml:para>The ExtranetCertificationUrl parameter specifies the external certification URL of the on-premises AD RMS server that's stamped into the Rights Account Certificate (RAC). The RAC establishes a user's identity in the AD RMS system, and is used to decrypt content.</maml:para>
        <maml:para>By default, the value of the ExtranetCertificationUrl parameter is https://&lt;FQDN&gt;/_wmcs/certification/servercertification.asmx.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IntranetCertificationUrl</maml:name>
      <maml:description>
        <maml:para>The IntranetCertificationUrl parameter specifies the internal certification URL of the on-premises AD RMS server that's stamped into the RAC. The RAC establishes a user's identity in the AD RMS system, and is used to decrypt content.</maml:para>
        <maml:para>By default, the value of the IntranetCertificationUrl parameter is https://&lt;server name&gt;/_wmcs/certification/servercertification.asmx.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RefreshTemplates</maml:name>
      <maml:description>
        <maml:para>The RefreshTemplates parameter specifies whether to update the RMS templates in a previously imported TPD. When you add, modify, or remove RMS templates in a TPD on the AD RMS server, you export the updated TPD to a new XML file, and import the new XML file in your cloud-based organization. The RefreshTemplates parameter uses the following rules:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Only the FileData, Password, and Name parameters are required. The value of the Name parameter must match the name of the previously imported TPD.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>If the new XML file doesn't contain an RMS template that was defined in the previously imported TPD, the RMS template is removed from the cloud-based organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>If the new XML file contains an updated RMS template that was defined in the previously imported TPD, the RMS template settings are updated in the cloud-based organization. However, the RMS template isn't changed from Archived to Distributed or vice versa.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>If the new XML file contains an RMS template that wasn't imported in the original TPD, the RMS template is added to the cloud-based organization in the Archived state. To make the new RMS template usable, you must change its state from Archived to Distributed using the Set-RMSTemplate cmdlet.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RMSOnlineAuthCertSubjectNameOverride</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RMSOnlineAuthorTest</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Hashtable</command:parameterValue>
      <dev:type>
        <maml:name>Hashtable</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RMSOnlineOrgOverride</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Guid</command:parameterValue>
      <dev:type>
        <maml:name>Guid</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example imports a TPD from an AD RMS server into a cloud-based organization. The TPD uses the following values:</maml:para>
        <maml:para />
        <maml:para>Path to exported XML file C:\My Documents\Contoso.xml</maml:para>
        <maml:para>Password of exported XML file Pa$$word1</maml:para>
        <maml:para>External licensing URL https://rms.contoso.com/_wmcs/licensing</maml:para>
        <maml:para>Internal licensing URL https://RMS01/_wmcs/licensing</maml:para>
        <maml:para>TPD name Contoso TPD</maml:para>
        <maml:para>Import-RMSTrustedPublishingDomain -Name "Contoso TPD" -FileData $([byte[]](Get-Content -Encoding byte -Path "C:\My Documents\Contoso.xml" -ReadCount 0)) -Password (ConvertTo-SecureString -String 'Pa$$word1' -AstPlainText -Force)-ExtranetLicensingUrl https://rms.contoso.com/_wmcs/licensing -IntranetLicensingUrl https://RMS01/_wmcs/licensing</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>A TPD contains the settings needed to use RMS features in your organization. For example, users can apply RMS templates to email messages. After you export the TPD from an on-premises AD RMS server to an XML file, you can import the XML file into your cloud-based organization.</maml:para>
    <maml:para>You can import TPDs from AD RMS servers running on all versions of Windows Server 2008 and Windows Server 2003.</maml:para>
    <maml:para>If the InternalLicensingEnabled parameter value is $true on the Set-IRMConfiguration cmdlet, all TPDs require a private key. If the InternalLicensingEnabled parameter value is $false, TPDs don't require a private key. However, the only RMS feature available to the organization is Outlook protection rules. Typically, TPDs without private keys are created when the AD RMS server uses a hardware-based cryptographic service provider (CSP) or a custom CSP.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/7c5e7a0f-9c9d-4863-bab8-bcc729cc16a6(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>7c6fe606-358c-4e61-8c13-c4e951548064
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-AdSiteLink</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-AdSiteLink cmdlet to view configuration information about an Active Directory IP site link.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>AdSiteLink</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-AdSiteLink</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AdSiteLinkIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name or GUID of the IP site link for which you want to view configuration information.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AdSiteLinkIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AdSiteLinkIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a list of all IP site links in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-ADSiteLink</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a list of all IP site links in your organization that have a specific Exchange cost assigned.</maml:para>
        <maml:para />
        <maml:para>Get-AdSiteLink | Where {$_.ExchangeCost -ne $null}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport configuration" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/7c6fe606-358c-4e61-8c13-c4e951548064(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>7e38396a-5d3d-424d-86e1-5d2f972d56a2
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-ClassificationRuleCollection</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Remove-ClassificationRuleCollection to remove classification rule collections from your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>ClassificationRuleCollection</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-ClassificationRuleCollection</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ClassificationRuleCollectionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the classification rule collection you want to remove. You can use any value that uniquely identifies the classification rule collection. For example, you can specify the name, rule collection name or distinguished name (DN) of the classification rule collection.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ClassificationRuleCollectionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ClassificationRuleCollectionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the classification rule collection named External Classification Rule Collection from your organization.</maml:para>
        <maml:para />
        <maml:para>Remove-ClassificationRuleCollection "External Classification Rule Collection"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/7e38396a-5d3d-424d-86e1-5d2f972d56a2(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>7f1daf42-8805-4313-831c-f473ddfd6371
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-DataClassification</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-DataClassification cmdlet to view the data classification rules in your organization. This cmdlet shows built-in data classification rules, and rules that you created that use document fingerprints.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>DataClassification</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-DataClassification</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DataClassificationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-DataClassification</maml:name>
      <command:parameter required="False">
        <maml:name>ClassificationRuleCollectionIdentity</maml:name>
        <command:parameterValue required="True">ClassificationRuleCollectionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>ClassificationRuleCollectionIdentity</maml:name>
      <maml:description>
        <maml:para>The ClassificationRuleCollectionIdentity parameter filters the results by the name of the data classification rule collection. The data classification rule collection that contains the built-in data classification rules is named Microsoft Rule Package. The data classification that contains new data classification rules that you create that use document fingerprints is named Fingerprint Classification Collection.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ClassificationRuleCollectionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ClassificationRuleCollectionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the data classification rule that you want to view. You can use any value that uniquely identifies the data classification rule. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LocalizedName</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Identity GUID value</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">DataClassificationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DataClassificationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a summary list of all data classification rules in the organization.</maml:para>
        <maml:para />
        <maml:para>Get-DataClassification</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a summary list of all new data classification rules based on document fingerprints that you created.</maml:para>
        <maml:para />
        <maml:para>Get-DataClassification -ClassificationRuleCollectionIdentity "Fingerprint Classification Collection"</maml:para>
        <maml:para />
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns details of the built-in data classification rule named SWIFT Code.</maml:para>
        <maml:para />
        <maml:para>Get-DataClassification "SWIFT Code" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Classification rule packages are used by data loss prevention (DLP) to detect sensitive content in messages.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/7f1daf42-8805-4313-831c-f473ddfd6371(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>7f8240bb-05fa-47c5-adcf-c843dbced0e8
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Start-EdgeSynchronization</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Start-EdgeSynchronization cmdlet to immediately start synchronization of configuration data from Active Directory to the subscribed Edge Transport servers.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Start</command:verb>
    <command:noun>EdgeSynchronization</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Start-EdgeSynchronization</maml:name>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForceFullSync</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ForceUpdateCookie</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TargetServer</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ForceFullSync</maml:name>
      <maml:description>
        <maml:para>The ForceFullSync switch specifies whether to initiate a full edge synchronization. If you run the command without this switch, only changes since the last replication are synchronized. If you use this switch, the entire configuration information and recipient data are synchronized.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ForceUpdateCookie</maml:name>
      <maml:description>
        <maml:para>The ForceUpdateCookie switch specifies whether to force the Microsoft Exchange EdgeSync service to update the replication cookie even if it encounters an error. The cookie maintains the changes in Active Directory since the previous EdgeSync replication. Normally, the Microsoft Exchange EdgeSync service doesn't update the cookie if it encounters any errors during replication.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to run this command. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the command is run on the local server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TargetServer</maml:name>
      <maml:description>
        <maml:para>The TargetServer parameter specifies an Edge Transport server to initiate edge synchronization with. If omitted, all Edge Transport servers are synchronized.</maml:para>
        <maml:para>You may want to use this parameter to specify a single Edge Transport server for synchronization if a new Edge Transport server has been installed or if that Edge Transport server has been unavailable for some time.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example starts edge synchronization on the Mailbox server named Mailbox01.</maml:para>
        <maml:para />
        <maml:para>Start-EdgeSynchronization -Server Mailbox01</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Microsoft Exchange EdgeSync service that runs on Mailbox servers replicates data stored in Active Directory to the local Active Directory Lightweight Directory Services (AD LDS) store on the Edge Transport server. After the initial replication, one-way synchronization of changed data in Active Directory to AD LDS keeps this data up to date.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "EdgeSync" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/7f8240bb-05fa-47c5-adcf-c843dbced0e8(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>85806a0c-0e98-4aba-b103-8ec128dd4222
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-OutlookAnywhere</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-OutlookAnywhere cmdlet to modify the properties on a computer running Microsoft Exchange Server 2013 enabled for Microsoft Outlook Anywhere.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>OutlookAnywhere</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-OutlookAnywhere</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultAuthenticationMethod</maml:name>
        <command:parameterValue required="True">Basic | Digest | Ntlm | Fba | WindowsIntegrated | LiveIdFba | LiveIdBasic | WSSecurity | Certificate | NegoEx | OAuth | Adfs | Kerberos | Negotiate | LiveIdNegotiate | Misconfigured</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionFlags</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionSPNList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionTokenChecking</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalClientAuthenticationMethod</maml:name>
        <command:parameterValue required="True">Basic | Digest | Ntlm | Fba | WindowsIntegrated | LiveIdFba | LiveIdBasic | WSSecurity | Certificate | NegoEx | OAuth | Adfs | Kerberos | Negotiate | LiveIdNegotiate | Misconfigured</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalClientsRequireSsl</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalHostname</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IISAuthenticationMethods</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalClientAuthenticationMethod</maml:name>
        <command:parameterValue required="True">Basic | Digest | Ntlm | Fba | WindowsIntegrated | LiveIdFba | LiveIdBasic | WSSecurity | Certificate | NegoEx | OAuth | Adfs | Kerberos | Negotiate | LiveIdNegotiate | Misconfigured</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalClientsRequireSsl</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalHostname</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SSLOffloading</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>XropUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name or GUID of the virtual directory. It's represented as: ServerName\VirtualDirectoryName (WebsiteName).</maml:para>
      </maml:description>
      <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>VirtualDirectoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DefaultAuthenticationMethod</maml:name>
      <maml:description>
        <maml:para>The DefaultAuthenticationMethod parameter can be specified to set the ExternalClientAuthenticationMethod, InternalClientAuthenticationMethod, and IISAuthenticationMethods parameters to the same authentication value. This authentication method can be set to one of these values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Basic</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Ntlm</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Negotiate</maml:para>
        </command:listItem></command:list>
        <maml:para>If the DefaultAuthenticationMethod parameter is specified, InternalClientAuthenticationMethod, ExternalClientAuthenticationMethod and IISAuthenticationMethods parameters cannot be used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Basic | Digest | Ntlm | Fba | WindowsIntegrated | LiveIdFba | LiveIdBasic | WSSecurity | Certificate | NegoEx | OAuth | Adfs | Kerberos | Negotiate | LiveIdNegotiate | Misconfigured</command:parameterValue>
      <dev:type>
        <maml:name>Basic | Digest | Ntlm | Fba | WindowsIntegrated | LiveIdFba | LiveIdBasic | WSSecurity | Certificate | NegoEx | OAuth | Adfs | Kerberos | Negotiate | LiveIdNegotiate | Misconfigured</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionFlags</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionFlags parameter is used to customize the options you use if you're using Extended Protection for Authentication. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Default setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Proxy Specifies that a proxy is terminating the SSL channel. A Service Principal Name (SPN) must be registered in the ExtendedProtectionSPNList parameter if proxy mode is configured.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProxyCoHosting Specifies that both HTTP and HTTPS traffic may be accessing the Client Access server and that a proxy is located between at least some of the clients and the Client Access server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AllowDotlessSPN Specifies whether you want to support valid SPNs that aren't in the fully qualified domain name (FQDN) format, for example ContosoMail. You specify valid SPNs with the ExtendedProtectionSPNList parameter. This option makes extended protection less secure because dotless certificates aren't unique, so it isn't possible to ensure that the client-to-proxy connection was established over a secure channel.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NoServiceNameCheck Specifies that the SPN list won't be checked to validate a channel binding token. This option makes Extended Protection for Authentication less secure. We generally don't recommend this setting.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionSPNList</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionSPNList parameter specifies a list of valid Service Principal Names (SPNs) if you're using Extended Protection for Authentication on the specified virtual directory.</maml:para>
        <maml:para>The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Null This is the default value.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Single SPN or comma delimited list of valid SPNs By default, you must specify the fully qualified domain name (FQDN) (for example mail.contoso.com) for each SPN. If you want to add an SPN that's not an FQDN (for example, ContosoMail), you must also use the ExtendedProtectionTokenChecking parameter with the AllowDotlessSPN value. You specify the domain in SPN format. The SPN format is &lt;protocol&gt;/&lt;FQDN&gt;. For example, a valid entry could be HTTP/mail.contoso.com.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionTokenChecking</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionTokenChecking parameter defines how you want to use Extended Protection for Authentication on the specified Exchange virtual directory. Extended Protection for Authentication isn't enabled by default. The available settings are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Extended Protection for Authentication won't be used. Connections between the client and Exchange won't use Extended Protection for Authentication on this virtual directory. This is the default setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Allow Extended Protection for Authentication will be used for connections between the client and Exchange on this virtual directory if both the client and server support Extended Protection for Authentication. Connections that don't support Extended Protection for Authentication on the client and server will work, but may not be as secure as a connection using Extended Protection for Authentication.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more Service Principal Names (SPNs) by using the ExtendedProtectionSPNList parameter.</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Require Extended Protection for Authentication will be used for all connections between clients and Exchange servers for this virtual directory. If either the client or server doesn't support Extended Protection for Authentication, the connection between the client and server will fail. If you set this option, you must also set a value for the ExtendedProtectionSPNList parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more SPNs using the parameter ExtendedProtectionSPNList.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      <dev:type>
        <maml:name>None | Allow | Require</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalClientAuthenticationMethod</maml:name>
      <maml:description>
        <maml:para>The ExternalClientAuthenticationMethod parameter specifies the authentication method used for external client authentication. Possible values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Basic</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Ntlm</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Negotiate</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Basic | Digest | Ntlm | Fba | WindowsIntegrated | LiveIdFba | LiveIdBasic | WSSecurity | Certificate | NegoEx | OAuth | Adfs | Kerberos | Negotiate | LiveIdNegotiate | Misconfigured</command:parameterValue>
      <dev:type>
        <maml:name>Basic | Digest | Ntlm | Fba | WindowsIntegrated | LiveIdFba | LiveIdBasic | WSSecurity | Certificate | NegoEx | OAuth | Adfs | Kerberos | Negotiate | LiveIdNegotiate | Misconfigured</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalClientsRequireSsl</maml:name>
      <maml:description>
        <maml:para>The ExternalClientsRequireSsl parameter specifies whether clients connecting via Outlook Anywhere from outside the network must use Secure Sockets Layer (SSL). The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalHostname</maml:name>
      <maml:description>
        <maml:para>The ExternalHostname parameter specifies the external host name to use in the Microsoft Outlook profiles for users enabled for Outlook Anywhere.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IISAuthenticationMethods</maml:name>
      <maml:description>
        <maml:para>The IISAuthenticationMethods parameter specifies the authentication method enabled on the /rpc virtual directory in Internet Information Services (IIS). You can set the virtual directory to allow Basic authentication or NTLM authentication. Alternatively, you can also set the virtual directory to allow both Basic and NTLM authentication. All other authentication methods are disabled.</maml:para>
        <maml:para>You may want to enable both Basic and NTLM authentication if you're using the IIS virtual directory with multiple applications that require different authentication methods.</maml:para>
        <maml:para>When you configure this setting using the IIS interface, you can enable as many authentication methods as you want.</maml:para>
        <maml:para>For more information about configuring this parameter with multiple values, see the example later in this topic.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalClientAuthenticationMethod</maml:name>
      <maml:description>
        <maml:para>The InternalClientAuthenticationMethod parameter specifies the authentication method used for internal client authentication. Possible values include:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Basic</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Ntlm</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Negotiate</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Basic | Digest | Ntlm | Fba | WindowsIntegrated | LiveIdFba | LiveIdBasic | WSSecurity | Certificate | NegoEx | OAuth | Adfs | Kerberos | Negotiate | LiveIdNegotiate | Misconfigured</command:parameterValue>
      <dev:type>
        <maml:name>Basic | Digest | Ntlm | Fba | WindowsIntegrated | LiveIdFba | LiveIdBasic | WSSecurity | Certificate | NegoEx | OAuth | Adfs | Kerberos | Negotiate | LiveIdNegotiate | Misconfigured</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalClientsRequireSsl</maml:name>
      <maml:description>
        <maml:para>The InternalClientsRequireSsl parameter specifies whether clients connecting via Outlook Anywhere from inside the network require SSL. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalHostname</maml:name>
      <maml:description>
        <maml:para>The InternalHostname parameter specifies the internal hostname for the Outlook Anywhere virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the name of the server being modified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SSLOffloading</maml:name>
      <maml:description>
        <maml:para>The SSLOffloading parameter specifies whether the Client Access server requires SSL. This value should be set only to $true when an SSL hardware solution is running in front of the Client Access server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>XropUrl</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the client authentication method to NTLM for the /rpc virtual directory on the Client Access server CAS01.</maml:para>
        <maml:para />
        <maml:para>Set-OutlookAnywhere -Identity: "CAS01\rpc (Default Web Site)" -ExternalClientAuthenticationMethod NTLM</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets SSL offloading for the /rpc virtual directory to false, which means that SSL isn't used for securing client connections to the Client Access server EXCH1.</maml:para>
        <maml:para />
        <maml:para>Set-OutlookAnywhere -Identity "EXCH1\rpc (Default Web Site)" -SSLOffloading $false</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the authentication method for the /rpc virtual directory setting in IIS to NTLM.</maml:para>
        <maml:para />
        <maml:para>Set-OutlookAnywhere -Identity "EXCH1\rpc (Default Web Site)" -IISAuthenticationMethods NTLM</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 4 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the available authentication methods for the /rpc virtual directory setting in IIS to use both Basic and NTLM authentication. After you set this value, you can use the IIS virtual directory to handle authentication for multiple applications that require different authentication methods.</maml:para>
        <maml:para />
        <maml:para>Set-OutlookAnywhere -Identity "EXCH1\rpc (Default Web Site)" -IISAuthenticationMethods Basic,NTLM</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Outlook Anywhere configuration (enable, disable, change, view)" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/85806a0c-0e98-4aba-b103-8ec128dd4222(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>89af98c7-b6cb-4aa5-8ffa-d438579b7aa2
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-RMSTrustedPublishingDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-RMSTrustedPublishingDomain cmdlet to configure a trusted publishing domain (TPD) in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>RMSTrustedPublishingDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-RMSTrustedPublishingDomain</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RmsTrustedPublishingDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Default</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtranetCertificationUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtranetLicensingUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IntranetCertificationUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IntranetLicensingUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the TPD. You can use any value that uniquely identifies the TPD, for example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">RmsTrustedPublishingDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RmsTrustedPublishingDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Default</maml:name>
      <maml:description>
        <maml:para>The Default parameter specifies this is the default TPD. The default TPD displays RMS templates and provides rights protection to all new content. There can be only one default TPD in an organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtranetCertificationUrl</maml:name>
      <maml:description>
        <maml:para>The ExtranetCertificationUrl parameter specifies the external certification URL of the on-premises AD RMS server that's stamped into the Rights Account Certificate (RAC). The RAC establishes a user's identity in the AD RMS system and is used to decrypt content.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtranetLicensingUrl</maml:name>
      <maml:description>
        <maml:para>The ExtranetLicensingUrl parameter specifies the external licensing URL of the on-premises AD RMS server that's stamped into the publishing license. The publishing license specifies the users that can open the rights-protected content, under which conditions the content may be opened by the user, and the rights that each user will have to the rights-protected content.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IntranetCertificationUrl</maml:name>
      <maml:description>
        <maml:para>The IntranetCertificationUrl parameter specifies the internal certification URL of the on-premises AD RMS server that's stamped into the RAC. The RAC establishes a user's identity in the AD RMS system and is used to decrypt content.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IntranetLicensingUrl</maml:name>
      <maml:description>
        <maml:para>The IntranetLicensingUrl parameter specifies the internal licensing URL of the on-premises AD RMS server that's stamped into the publishing license. The publishing license specifies the users that can open the rights-protected content, under which conditions the content may be opened by the user, and the rights that each user will have to the rights-protected content.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the name of the TPD.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example makes the following changes to the existing TPD Contoso TPD:</maml:para>
        <maml:para />
        <maml:para>Sets Contoso TPD as the default TPD for the organization.</maml:para>
        <maml:para>Sets the external licensing URL to https://rms.contoso.com/_wmcs/licensing.</maml:para>
        <maml:para>Sets the external certification URL to https://rms.contoso.com/_wmcs/certification/servercertification.asmx</maml:para>
        <maml:para>Set-RMSTrustedPublishingDomain "Contoso TPD" -Default -ExtranetLicensingUrl https://rms.contoso.com/_wmcs/licensing -ExtranetCertificationUrl https://rms.contoso.com/_wmcs/certification/servercertification.asmx</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>A TPD contains the settings needed to use RMS features in your organization. For example, users can apply RMS templates to email messages.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/89af98c7-b6cb-4aa5-8ffa-d438579b7aa2(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>89f2566b-cf64-437b-af09-4d495e52b25b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-ConnectSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-ConnectSubscription cmdlet to view information about the people subscriptions that have been set up between the users in your organization and a supported networking service (for example, Facebook and LinkedIn).</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>ConnectSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-ConnectSubscription</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeReport</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AggregationType</maml:name>
        <command:parameterValue required="True">Aggregation | Mirrored | Migration | PeopleConnection | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AggregationType</maml:name>
      <maml:description>
        <maml:para>The AggregationType parameter filters the results by type. The acceptable values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>All</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Aggregation</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Migration</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Mirrored</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PeopleConnection</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Aggregation | Mirrored | Migration | PeopleConnection | All</command:parameterValue>
      <dev:type>
        <maml:name>Aggregation | Mirrored | Migration | PeopleConnection | All</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies a unique value that identifies a connection between a cloud-based mailbox and a contact subscription. This value is generated by the provider after a successful connection is made.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeReport</maml:name>
      <maml:description>
        <maml:para>The IncludeReport switch specifies whether to return additional details, which can be used for troubleshooting.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the mailbox.</maml:para>
        <maml:para>This parameter accepts the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
          <maml:para>Example: JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Canonical DN</maml:para>
          <maml:para>Example: Atlanta.Corp.Contoso.Com/Users/JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display Name</maml:para>
          <maml:para>Example: Jeff Phillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished Name (DN)</maml:para>
          <maml:para>Example: CN=JPhillips,CN=Users,DC=Atlanta,DC=Corp,DC=contoso,DC=com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Domain\Account</maml:para>
          <maml:para>Example: Atlanta\JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
          <maml:para>Example: fb456636-fe7d-4d58-9d15-5af57d0354c2</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Immutable ID</maml:para>
          <maml:para>Example: fb456636-fe7d-4d58-9d15-5af57d0354c2@contoso.com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Legacy Exchange DN</maml:para>
          <maml:para>Example: /o=Contoso/ou=AdministrativeGroup/cn=Recipients/cn=JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SMTP Address</maml:para>
          <maml:para>Example: Jeff.Phillips@contoso.com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User Principal Name</maml:para>
          <maml:para>Example: JPhillips@contoso.com</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the maximum number of results to return. If you want to return all recipients that match the filter, use unlimited for the value of this parameter. The default value is 1000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows detailed information for all the contact subscriptions that are configured in the mailbox of the user Kim Akers.</maml:para>
        <maml:para />
        <maml:para>Get-ConnectSubscription -Mailbox "Kim Akers" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns additional information about the contact subscriptions that are configured in the mailbox of the user Kim Akers.</maml:para>
        <maml:para />
        <maml:para>Get-ConnectSubscription -Mailbox "Kim Akers" -IncludeReport | Export-CSV C:\KimAkersConnectReport</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Users can set up people subscriptions between supported networking services and their cloud-based mailbox. The Exchange 2013 release only supports LinkedIn people connections. The Get-ConnectSubscription cmdlet returns the list of connections that have been set up in your organization. It can also return additional information such as the current connection status of each connection and the time of the most recent successful synchronization.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/89f2566b-cf64-437b-af09-4d495e52b25b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>8a3d7245-528d-4501-9fc4-92ce0616cff9
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-OutlookProvider</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-OutlookProvider cmdlet to set specific global settings using the msExchOutlookProvider attribute on the msExchAutoDiscoverConfig object in Active Directory.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>OutlookProvider</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-OutlookProvider</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OutlookProviderIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CertPrincipalName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OutlookProviderFlags</maml:name>
        <command:parameterValue required="True">None | ServerExclusiveConnect</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequiredClientVersions</maml:name>
        <command:parameterValue required="True">String[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TTL</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the ADIDParameter value of the MAPI protocol for which you want to set global settings.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OutlookProviderIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OutlookProviderIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CertPrincipalName</maml:name>
      <maml:description>
        <maml:para>The CertPrincipalName parameter specifies the Secure Sockets Layer (SSL) certificate principal name required for connecting to Exchange from an external location.</maml:para>
        <maml:para>This parameter is only used for Outlook Anywhere clients.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a common name for the Outlook Provider Configuration object. This can be a user-friendly name for identification.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OutlookProviderFlags</maml:name>
      <maml:description>
        <maml:para>The OutlookProviderFlags parameter specifies how Outlook clients should connect to the Exchange server. The value can be set to ServerExclusiveConnect, ExternalClientsRequireSSL, InternalClientsRequireSSL, or to None to clear the flags. The recommended value is None, which is also the default setting.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | ServerExclusiveConnect</command:parameterValue>
      <dev:type>
        <maml:name>None | ServerExclusiveConnect</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequiredClientVersions</maml:name>
      <maml:description>
        <maml:para>The RequiredClientVersions parameter specifies the minimum version of Microsoft Outlook that's allowed to connect to the Exchange server. This information is in the Autodiscover response to the client connection request. Valid input for this parameter is "&lt;MinimumVersion&gt;, &lt;ExpirationDate&gt;".</maml:para>
        <maml:para>&lt;MinimumVersion&gt; is the version of Outlook in the format xx.x.xxxx.xxxx. For example, to specify Outlook 2010 Service Pack 2 (SP2), use the value 14.0.7012.1000.</maml:para>
        <maml:para>&lt;ExpirationDate&gt; is the UTC date-time when connections by older versions of Outlook will be blocked. The UTC date-time is represented in the ISO 8601 date-time format: yyyy-mm-ddThh:mm:ss.fffZ, where yyyy = year, mm = month, dd = day, T indicates the beginning of the time component, hh = hour, mm = minute, ss = second, fff = fractions of a second, and Z signifies Zulu, which is another way to denote UTC.</maml:para>
        <maml:para>An example of a valid value for this parameter is "14.0.7012.1000, 2014-01-01T12:00:00Z".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String[]</command:parameterValue>
      <dev:type>
        <maml:name>String[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Mailbox server to use for Outlook Anywhere clients.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TTL</maml:name>
      <maml:description>
        <maml:para>The TTL parameter specifies the duration (in hours) that the specified settings are valid.</maml:para>
        <maml:para>If a value is specified, the settings are rediscovered via the Autodiscover service after the duration specified with this parameter. A value of 0 indicates that no rediscovery is required. The default value is 1 hour.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example changes the duration that the Autodiscover service settings are valid for the Microsoft Outlook provider msExchAutoDiscoverConfig.</maml:para>
        <maml:para />
        <maml:para>Set-OutlookProvider -Identity msExchAutoDiscoverConfig -TTL 2</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Set-OutlookProvider cmdlet creates the global settings for the Autodiscover service. It sets the AutoDiscoverConfig object under the Global Settings object in Active Directory and sets the attributes specified in the parameters listed in the Parameters section.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Autodiscover service configuration settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/8a3d7245-528d-4501-9fc4-92ce0616cff9(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>8b52f3f7-187d-4171-80f2-ba5b56862e46
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-ForeignConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-ForeignConnector cmdlet to view the configuration information for a Foreign connector in the Transport service of a Mailbox server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>ForeignConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-ForeignConnector</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ForeignConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the Foreign connector that you want to examine. The Identity parameter can take any of the following values for the Foreign connector object:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Connector name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ServerName\ConnectorName</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">ForeignConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ForeignConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all Foreign connectors in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-ForeignConnector</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed configuration information for the Foreign connector named Fax Connector.</maml:para>
        <maml:para />
        <maml:para>Get-ForeignConnector "Fax Connector" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Foreign connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/8b52f3f7-187d-4171-80f2-ba5b56862e46(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>8c1853fd-e5d8-47d9-b603-33a6c7cec87c
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-AdSiteLink</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-AdSiteLink cmdlet to assign an Exchange-specific cost to an Active Directory IP site link. You can also use this cmdlet to configure the maximum message size that can pass across an Active Directory IP site link.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>AdSiteLink</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-AdSiteLink</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AdSiteLinkIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExchangeCost</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name or GUID of the IP site link you want to modify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AdSiteLinkIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AdSiteLinkIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExchangeCost</maml:name>
      <maml:description>
        <maml:para>The ExchangeCost parameter specifies an Exchange-specific cost for the IP site link. This cost is used instead of the Active Directory-assigned cost. To clear the value of the ExchangeCost parameter and revert to using the cost of the IP site link specified in Active Directory, set the value of the ExchangeCost parameter to $null.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxMessageSize</maml:name>
      <maml:description>
        <maml:para>The MaxMessageSize parameter specifies the maximum size of a message that can pass across the Active Directory IP site link. The default value is unlimited.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 64 KB through Int64. To remove the message size limit on an Active Directory IP site link, enter a value of unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the IP site link. The name that you assign overwrites the current identity of the IP site link.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example assigns an Exchange-specific cost of 25 to the IP site link DEFAULT_IP_SITE_LINK and configures a maximum message size limit of 10 MB on the IP site link.</maml:para>
        <maml:para />
        <maml:para>Set-AdSiteLink DEFAULT_IP_SITE_LINK -ExchangeCost 25 -MaxMessageSize 10MB</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>By default, Microsoft Exchange determines the least cost routing path by using the cost assigned to the Active Directory IP site link. You can use the Set-AdSiteLink cmdlet to assign an Exchange-specific cost to the Active Directory IP site link. The Exchange-specific cost is a separate attribute used instead of the Active Directory-assigned cost to determine the least cost routing path.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport configuration" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/8c1853fd-e5d8-47d9-b603-33a6c7cec87c(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>8f54a77c-7a5c-446f-b661-022c7e53f5c0
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-TransportConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-TransportConfig cmdlet to view organization-wide transport configuration settings.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>TransportConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-TransportConfig</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists the organization-wide transport settings on Mailbox server, or the local transport settings on an Edge Transport server.</maml:para>
        <maml:para />
        <maml:para>Get-TransportConfig</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all delivery status notification-related (DSN) configuration settings for your organization when run on a Mailbox server. When run on an Edge Transport server, it displays the DSN-related settings configured on that Edge Transport server.</maml:para>
        <maml:para />
        <maml:para>Get-TransportConfig | Format-List *DSN*</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-TransportConfig cmdlet displays configuration information for global transport settings applied across the organization when the cmdlet is run on a Mailbox server. When this cmdlet is run on an Edge Transport server, only the transportation configuration settings for the local computer are shown.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport configuration" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/8f54a77c-7a5c-446f-b661-022c7e53f5c0(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>93d43160-f34a-418c-86b7-61c25fd9e847
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-ForeignConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-ForeignConnector cmdlet to modify an existing Foreign connector in the Transport service of a Mailbox server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>ForeignConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-ForeignConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ForeignConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AddressSpaces</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DropDirectory</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DropDirectoryQuota</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsScopedConnector</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RelayDsnRequired</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SourceTransportServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the Foreign connector that you want to modify. The Identity parameter can take any of the following values for the Foreign connector object:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Connector name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ServerName\ConnectorName</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">ForeignConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ForeignConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddressSpaces</maml:name>
      <maml:description>
        <maml:para>The AddressSpaces parameter specifies the domain names to which the Foreign connector sends messages. The complete syntax for entering each address space is as follows: &lt;AddressSpaceType&gt;:&lt;AddressSpace&gt;;&lt;AddressSpaceCost&gt;</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AddressSpaceType: The address space type may be SMTP, X400, or any other text string. If you omit the address space type, an SMTP address space type is assumed.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AddressSpace: For SMTP address space types, the address space that you enter must be RFC 1035-compliant. For example, *, *.com, and *.contoso.com are permitted, but *contoso.com isn't permitted. For X.400 address space types, the address space that you enter must be RFC 1685-compliant, such as o=MySite;p=MyOrg;a=adatum;c=us. For all other values of address type, you can enter any text for the address space.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AddressSpaceCost : The valid input range for the cost is from 1 through 100. A lower cost indicates a better route. If you omit the address space cost, a cost of 1 is assumed. If you enter a non-SMTP address space that contains a semicolon (;), you must specify the address space cost.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify the address space type or the address space cost, you must enclose the address space in quotation marks ("). For example, the following address space entries are equivalent:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>"SMTP:contoso.com;1"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>"contoso.com;1"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>"SMTP:contoso.com"</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>contoso.com</maml:para>
        </command:listItem></command:list>
        <maml:para>You may specify multiple address spaces by separating the address spaces with commas, for example: contoso.com,fabrikam.com. If you specify the address space type or the address space cost, you must enclose the address space in quotation marks ("), for example: "contoso.com;2","fabrikam.com;3".</maml:para>
        <maml:para>To add or remove one or more address space values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comment</maml:name>
      <maml:description>
        <maml:para>The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DropDirectory</maml:name>
      <maml:description>
        <maml:para>The DropDirectory parameter specifies the name of the Drop directory used by this Foreign connector. All outbound messages sent to address spaces defined by this Foreign connector are put in the specified Drop directory. The location of the Drop directory for each Foreign connector is controlled by the following two items:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>RootDropDirectoryPath parameter in the Set-TransportService cmdlet: This option is used for all Foreign connectors that exist on the Mailbox server. The value of the RootDropDirectoryPath parameter may be a local path or a Universal Naming Convention (UNC) path to a remote server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DropDirectory parameter in the Set-ForeignConnector cmdlet: This value is set for each Foreign Connector that exists on the server.</maml:para>
        </command:listItem></command:list>
        <maml:para>By default, the RootDropDirectoryPath parameter is blank. This indicates the value of RootDropDirectoryPath is the Exchange 2010 installation folder. The default Exchange 2010 installation folder is C:\Program Files\Microsoft\Exchange Server\. By default, the value of the DropDirectory parameter is the name of the Foreign connector.</maml:para>
        <maml:para>If the value of the DropDirectory parameter doesn't contain absolute path information, the location of the Drop directory is defined by the combination of the DropDirectory parameter and the RootDropDirectoryPath parameter. If the value of the DropDirectory parameter contains absolute path information, the value of the RootDropDirectoryPath must be unspecified. The location of the Drop directory is defined only by the value of the DropDirectory parameter.</maml:para>
        <maml:para>The Drop directory isn't created for you. Therefore, you have to manually create each Drop directory folder.</maml:para>
        <maml:para>The Drop directory must have the following permissions assigned to it:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Network Service: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>System: Full Control</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Administrators: Full Control</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DropDirectoryQuota</maml:name>
      <maml:description>
        <maml:para>The DropDirectoryQuota parameter specifies the maximum size of all message files in the Drop directory. When the specified value is reached, no new message files can be copied into the Drop directory until the existing messages are delivered and deleted.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 1 through 2147483647 bytes. If you enter a value of unlimited, no message size limit is imposed on the Drop directory. The default value is unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether to enable the Foreign connector. The valid values are $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress warning or confirmation messages. This switch can be used when the task is run programmatically and prompting for administrative input is inappropriate. If the Force switch isn't provided in the command, you're prompted for administrative input. You don't have to specify a value with this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsScopedConnector</maml:name>
      <maml:description>
        <maml:para>The IsScopedConnector parameter specifies the availability of the connector to other Mailbox servers. When the value of this parameter is $false, the connector can be used by all Mailbox servers in the Exchange organization. When the value of this parameter is $true, the connector can be used only by Mailbox servers in the same Active Directory site. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxMessageSize</maml:name>
      <maml:description>
        <maml:para>The MaxMessageSize parameter specifies the maximum size of a message that can pass through this Foreign connector.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>If you enter a value of unlimited, no message size limit is imposed on this Foreign connector. The default value is unlimited. The valid input range for this parameter is from 0 through 2147483647 kilobytes. If you set the value of the MaxMessageSize parameter to 0, you effectively disable the Foreign connector. However, if you set the value of the MaxMessageSize parameter to 0 when the value of the Enabled attribute is $true, you generate event log errors. The preferred method to disable the Foreign connector is to use the Enabled parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a descriptive name for the Foreign connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RelayDsnRequired</maml:name>
      <maml:description>
        <maml:para>The RelayDsnRequired parameter specifies whether a Relay delivery status notification (DSN) is required by the Foreign connector when messages are written to the Drop directory. The valid input values for this parameter are $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SourceTransportServers</maml:name>
      <maml:description>
        <maml:para>The SourceTransportServers parameter specifies the names of the Mailbox servers that use this Foreign connector. Having a single Foreign connector homed on multiple Mailbox servers running the Transport service provides fault tolerance and high availability if one of the servers fails. The default value of this parameter is the name of the Mailbox server on which this Foreign connector was first installed.</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example configures a 10 MB message size limit on the existing Foreign connector named Fax Connector.</maml:para>
        <maml:para />
        <maml:para>Set-ForeignConnector "Fax Connector" -MaxMessageSize 10MB</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>A Foreign connector uses a Drop directory in the Transport service of a Mailbox server to send messages to a local messaging server that doesn't use SMTP as its primary transport mechanism. These messaging servers are known as foreign gateway servers. Third-party fax gateway servers are examples of foreign gateway servers. The address spaces assigned to a Foreign connector can be SMTP or non-SMTP.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Foreign connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/93d43160-f34a-418c-86b7-61c25fd9e847(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>94c4a829-0ef4-4623-aeb9-b362f66f4a71
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-EdgeSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-EdgeSubscription cmdlet to export an Edge Subscription file from an Edge Transport server and to import the Edge Subscription file to a Mailbox server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>EdgeSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-EdgeSubscription</maml:name>
      <command:parameter required="False">
        <maml:name>AccountExpiryDuration</maml:name>
        <command:parameterValue required="True">TimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CreateInboundSendConnector</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CreateInternetSendConnector</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FileData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FileName</maml:name>
        <command:parameterValue required="True">LongPath</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Site</maml:name>
        <command:parameterValue required="True">AdSiteIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AccountExpiryDuration</maml:name>
      <maml:description>
        <maml:para>The AccountExpiryDuration parameter specifies how soon the bootstrap account created by this command will expire.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>The value for this parameter must be a minimum of 00:02:00 or 2 minutes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>TimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CreateInboundSendConnector</maml:name>
      <maml:description>
        <maml:para>The CreateInboundSendConnector parameter specifies whether to create the Send connector to connect the Edge Transport server and the Hub Transport servers. The default value is $true. The Send connector address space is set to "--", the smart hosts are set to "--", the Edge Transport server is set as the source server, and Domain Name System (DNS) routing is disabled. This parameter is only used when you run the command on the Hub Transport server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CreateInternetSendConnector</maml:name>
      <maml:description>
        <maml:para>The CreateInternetSendConnector parameter specifies whether to create the Send connector to connect to the Internet. The default value is $true. The Send connector address space is set to all domains (*), the Edge Transport server is set as the source server, and DNS routing is enabled. This parameter is only used when you run the command on the Hub Transport server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FileData</maml:name>
      <maml:description>
        <maml:para>The FileData parameter specifies the byte-encoded data object that contains the Edge Subscription file information.</maml:para>
        <maml:para>For more information about the syntax required to use this parameter, see Exchange Management Shell quick reference for Exchange 2013.</maml:para>
        <maml:para>You can only use this parameter when you're running this command on a Mailbox server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FileName</maml:name>
      <maml:description>
        <maml:para>The FileName parameter specifies the full path of the Edge Subscription file.</maml:para>
        <maml:para>You can only use this parameter when you're running this command on an Edge Transport server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">LongPath</command:parameterValue>
      <dev:type>
        <maml:name>LongPath</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress warning or confirmation messages. This switch can be used when the task is run programmatically and prompting for administrative input is inappropriate. If the Force switch isn't provided in the command, you're prompted for administrative input. You don't have to specify a value with this parameter.</maml:para>
        <maml:para>This switch is useful when you use a script with the Edge Subscription command because it bypasses confirmation. Another scenario in which this switch is useful is when you have to subscribe an Edge Transport server again, and you want to overwrite the existing configuration information.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Site</maml:name>
      <maml:description>
        <maml:para>The Site parameter specifies the name of the Active Directory site that contains the Mailbox servers with which the Edge Transport servers are associated. This parameter is used and required only when you run the command on a Mailbox server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AdSiteIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AdSiteIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the Edge Subscription file. It should be run on your Edge Transport server.</maml:para>
        <maml:para />
        <maml:para>New-EdgeSubscription -FileName "c:\EdgeServerSubscription.xml"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example imports the Edge Subscription file generated in EXAMPLE 1 to the Active Directory site Default-First-Site-Name. Importing the Edge Subscription file completes the Edge Subscription process. You must run this command on the Mailbox server.</maml:para>
        <maml:para />
        <maml:para>The first command reads the data from the Edge Subscription file and stores it in a temporary variable as a byte-encoded data object. The second command completes the Edge subscription process.</maml:para>
        <maml:para />
        <maml:para>[byte[]]$Temp = Get-Content -Path "C:\EdgeServerSubscription.xml" -Encoding Byte -ReadCount 0</maml:para>
        <maml:para>New-EdgeSubscription -FileData $Temp -Site "Default-First-Site-Name"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example also imports the Edge Subscription file generated in EXAMPLE 1 to the Active Directory site Default-First-Site-Name; however, the end result is accomplished in a single line of code. You must run this command on the Mailbox server.</maml:para>
        <maml:para />
        <maml:para>New-EdgeSubscription -FileData ([byte[]]$(Get-Content -Path "C:\EdgeServerSubscription.xml" -Encoding Byte -ReadCount 0)) -Site "Default-First-Site-Name"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Edge Transport server doesn't have access to Active Directory. All configuration and recipient information is stored in the Active Directory Lightweight Directory Services (AD LDS) instance. The New-EdgeSubscription cmdlet creates the Edge Subscription file that will be imported on a Mailbox server in the Active Directory site to which you want to subscribe this Edge Transport server..</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "EdgeSync" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/94c4a829-0ef4-4623-aeb9-b362f66f4a71(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>961266ab-21f2-4410-896b-9ede09ba20cd
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-PopSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-PopSubscription cmdlet to view information about POP subscriptions configured in cloud-based mailboxes.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>PopSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-PopSubscription</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeReport</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AggregationType</maml:name>
        <command:parameterValue required="True">Aggregation | Mirrored | Migration | PeopleConnection | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AggregationType</maml:name>
      <maml:description>
        <maml:para>The AggregationType parameter filters the results by type. The acceptable values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>All</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Aggregation</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Migration</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Mirrored</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PeopleConnection</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Aggregation | Mirrored | Migration | PeopleConnection | All</command:parameterValue>
      <dev:type>
        <maml:name>Aggregation | Mirrored | Migration | PeopleConnection | All</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the POP subscription. You can identify the subscription by using one of the following methods:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Specify the globally unique identifier of the subscription, which is its canonical name (CN).</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Use the Mailbox parameter to specify the mailbox that contains the subscription, and then specify the name of the subscription.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can find the identifying values for a POP subscription, such as Identity and Name, by running this command: Get-PopSubscription -Mailbox &lt;mailbox&gt;.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeReport</maml:name>
      <maml:description>
        <maml:para>The IncludeReport switch specifies whether to return additional details, which can be used for troubleshooting.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that contains the POP subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the total number of subscriptions to return. If no value is specified, the parameter returns all results that match the filter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows detailed information for all the POP subscriptions configured in the mailbox of the user Kim Akers.</maml:para>
        <maml:para />
        <maml:para>Get-PopSubscription -Mailbox "Kim Akers" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns additional information about the POP subscriptions configured in the mailbox of the user Kim Akers and exports the results to a .csv file.</maml:para>
        <maml:para />
        <maml:para>Get-PopSubscription -Mailbox "Kim Akers" -IncludeReport | Export-CSV C:\KimAkersPopReport</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can view the properties of the POP subscription, such as the POP server, authentication method, connection status, and the last time a successful synchronization occurred.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/961266ab-21f2-4410-896b-9ede09ba20cd(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>999d149b-0e68-4f19-9d40-06d21b3fb1c0
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-X400AuthoritativeDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-X400AuthoritativeDomain cmdlet to create and specify the X.400 authoritative domain for the organization. The X.400 authoritative domain defines the standard fields for the namespace appended to the recipient identity for all mailboxes assigned an X.400 address.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>X400AuthoritativeDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-X400AuthoritativeDomain</maml:name>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>X400DomainName</maml:name>
        <command:parameterValue required="True">X400Domain</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>X400ExternalRelay</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for an X.400 authoritative domain object. When you specify a name that includes spaces, you must enclose the name in quotation marks ("), for example, "Display Name". The Name parameter can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>X400DomainName</maml:name>
      <maml:description>
        <maml:para>The X400DomainName parameter specifies the X.400 namespace, which can only include the X.400 organizational components. Specifically, only the following attribute types are supported:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Label (Abbreviation)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>C (Country)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>A (ADMD)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>P (PRMD)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>O (Organization)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OU1 (Organization unit 1)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OU2 (Organization unit 2)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OU3 (Organization unit 3)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>OU4 (Organization unit 4)</maml:para>
        </command:listItem></command:list>
        <maml:para>The address attributes must be separated by semicolons, and the address must be enclosed in quotation marks ("), for example,</maml:para>
        <maml:para>"C=US;A=ATT;P=Contoso;O=Sales"</maml:para>
      </maml:description>
      <command:parameterValue required="True">X400Domain</command:parameterValue>
      <dev:type>
        <maml:name>X400Domain</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>X400ExternalRelay</maml:name>
      <maml:description>
        <maml:para>The X400ExternalRelay parameter specifies this authoritative domain as an external relay domain. If you set the X400ExternalRelay parameter to $true, Microsoft Exchange routes email to the external address and doesn't treat resolution failures to this subdomain as an error.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the X.400 authoritative domain Sales in the private domain Contoso, which is under the administrative domain Fabrikam.</maml:para>
        <maml:para />
        <maml:para>New-X400AuthoritativeDomain -Name Sales -X400DomainName "C=US;A=Fabrikam;P=Contoso;O=Sales"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates an external relay domain for the X.400 namespace Europe organizational unit (OU) under the Sales organization in the private domain Contoso, which is under the administrative domain Fabrikam.</maml:para>
        <maml:para />
        <maml:para>New-X400AuthoritativeDomain -Name "Sales Europe" -X400DomainName "C=US;A=Fabrikam;P=Contoso;O=Sales;OU1=Europe" -X400ExternalRelay: $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>X.400 domain names can only include the following ASCII characters:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>A to Z</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>a to z</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>0-9</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>These punctuation and special characters: (space) ' () + , - . / : = ?</maml:para>
    </command:listItem></command:list>
    <maml:para>You can use the following X.400 attributes (one each per address):</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>NamecountryAbbreviation C Maximum character length 2</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Nameadministrative domainAbbreviation A Maximum character length 16</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Nameprivate domainAbbreviation P Maximum character length 16</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Nameorganization nameAbbreviation O Maximum character length 64</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>Nameorganizational unit nameAbbreviation Ou1-4 Maximum character length 32</maml:para>
    </command:listItem></command:list>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "X.400 domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/999d149b-0e68-4f19-9d40-06d21b3fb1c0(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>a0e22a98-2cc1-460b-870e-bf492cda54b4
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-AutodiscoverVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-AutodiscoverVirtualDirectory cmdlet to create an Autodiscover virtual directory on a server running Microsoft Exchange Server 2013.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>AutodiscoverVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-AutodiscoverVirtualDirectory</maml:name>
      <command:parameter required="False">
        <maml:name>ApplicationRoot</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AppPoolId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BasicAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DigestAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionFlags</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionSPNList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionTokenChecking</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OAuthAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Path</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Role</maml:name>
        <command:parameterValue required="True">ClientAccess | Mailbox</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WebSiteName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WindowsAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WSSecurityAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplicationRoot</maml:name>
      <maml:description>
        <maml:para>The ApplicationRoot parameter specifies the metabase path of the virtual directory. By default, this path is the same as the website in which the virtual directory is created.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AppPoolId</maml:name>
      <maml:description>
        <maml:para>The AppPoolId parameter specifies the pool of programs that can be used with the virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BasicAuthentication</maml:name>
      <maml:description>
        <maml:para>The BasicAuthentication parameter specifies whether Basic authentication is enabled on the Autodiscover virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DigestAuthentication</maml:name>
      <maml:description>
        <maml:para>The DigestAuthentication parameter specifies whether Digest authentication is enabled on the Autodiscover virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionFlags</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionFlags parameter is used to customize the options you use if you're using Extended Protection for Authentication. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Default setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Proxy Specifies that a proxy is terminating the SSL channel. A Service Principal Name (SPN) must be registered in the ExtendedProtectionSPNList parameter if proxy mode is configured.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProxyCoHosting Specifies that both HTTP and HTTPS traffic may be accessing the Client Access server and that a proxy is located between at least some of the clients and the Client Access server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AllowDotlessSPN Specifies whether you want to support valid SPNs that aren't in the fully qualified domain name (FQDN) format, for example ContosoMail. You specify valid SPNs with the ExtendedProtectionSPNList parameter. This option makes extended protection less secure because dotless certificates aren't unique, so it isn't possible to ensure that the client-to-proxy connection was established over a secure channel.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NoServiceNameCheck Specifies that the SPN list won't be checked to validate a channel binding token. This option makes Extended Protection for Authentication less secure. We generally don't recommend this setting.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionSPNList</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionSPNList parameter specifies a list of valid Service Principal Names (SPNs) if you're using Extended Protection for Authentication on the specified virtual directory.</maml:para>
        <maml:para>The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Null This is the default value.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Single SPN or comma delimited list of valid SPNs By default, you must specify the fully qualified domain name (FQDN) (for example mail.contoso.com) for each SPN. If you want to add an SPN that's not an FQDN (for example, ContosoMail), you must also use the ExtendedProtectionTokenChecking parameter with the AllowDotlessSPN value. You specify the domain in SPN format. The SPN format is &lt;protocol&gt;/&lt;FQDN&gt;. For example, a valid entry could be HTTP/mail.contoso.com.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionTokenChecking</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionTokenChecking parameter defines how you want to use Extended Protection for Authentication on the specified Exchange virtual directory. Extended Protection for Authentication isn't enabled by default. The available settings are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Extended Protection for Authentication won't be used. Connections between the client and Exchange won't use Extended Protection for Authentication on this virtual directory. This is the default setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Allow Extended Protection for Authentication will be used for connections between the client and Exchange on this virtual directory if both the client and server support Extended Protection for Authentication. Connections that don't support Extended Protection for Authentication on the client and server will work, but may not be as secure as a connection using Extended Protection for Authentication.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more Service Principal Names (SPNs) by using the ExtendedProtectionSPNList parameter.</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Require Extended Protection for Authentication will be used for all connections between clients and Exchange servers for this virtual directory. If either the client or server doesn't support Extended Protection for Authentication, the connection between the client and server will fail. If you set this option, you must also set a value for the ExtendedProtectionSPNList parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more SPNs using the parameter ExtendedProtectionSPNList.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      <dev:type>
        <maml:name>None | Allow | Require</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalUrl</maml:name>
      <maml:description>
        <maml:para>The ExternalUrl parameter specifies the URL used to connect to the virtual directory from outside the network firewall.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalUrl</maml:name>
      <maml:description>
        <maml:para>The InternalUrl parameter specifies the URL used to connect to the virtual directory from inside the network firewall.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OAuthAuthentication</maml:name>
      <maml:description>
        <maml:para>The OAuthAuthentication parameter specifies whether OAuth authentication is enabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Path</maml:name>
      <maml:description>
        <maml:para>The Path parameter specifies the directory that contains the system files for the virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Role</maml:name>
      <maml:description>
        <maml:para>The Role parameter specifies the configuration that should be used when the virtual directory is created. The following are the values that can be used with this parameter:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Client Access Configures the virtual directory for use on a Client Access server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Mailbox Configures the virtual directory for use on a Mailbox server.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">ClientAccess | Mailbox</command:parameterValue>
      <dev:type>
        <maml:name>ClientAccess | Mailbox</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to create the virtual directory. You can use any value that uniquely identifies the server, for example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the virtual directory will be created on the server where the Remote PowerShell session is established This will always be a Mailbox server. If you want to create the virtual directory on a Client Access server or another Mailbox server, you must use the Server parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WebSiteName</maml:name>
      <maml:description>
        <maml:para>The WebSiteName parameter specifies the name of the Internet Information Services (IIS) website under which to create the virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WindowsAuthentication</maml:name>
      <maml:description>
        <maml:para>The WindowsAuthentication parameter specifies whether Integrated Windows authentication is enabled on the Autodiscover virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WSSecurityAuthentication</maml:name>
      <maml:description>
        <maml:para>The WSSecurityAuthentication parameter enables or disables the Web Services Security (WS-Security) endpoint element in the Autodiscover Web.config file. The value can be set to $true or $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the virtual directory autodiscover under the website autodiscover.contoso.com and requires that the user connect using Integrated Windows authentication or Digest authentication.</maml:para>
        <maml:para />
        <maml:para>New-AutodiscoverVirtualDirectory -WebSiteName "autodiscover.contoso.com" -WindowsAuthentication $true -DigestAuthentication $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>If your organization has multiple email domains and each requires its own Autodiscover site and corresponding virtual directory, use the New-AutodiscoverVirtualDirectory cmdlet to create an Autodiscover virtual directory under a new website.</maml:para>
    <maml:para>When you're creating an Autodiscover virtual directory, we recommend that you enable Secure Sockets Layer (SSL) for the Autodiscover service.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Autodiscover virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/a0e22a98-2cc1-460b-870e-bf492cda54b4(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>a13fdafb-1ad8-47ee-b57f-2377d67c01ae
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-ConnectSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Set-ConnectSubscription cmdlet to reauthorize or change the settings for any contact integration subscription that you've set up between an external networking service (for example Facebook and LinkedIn), and your cloud-based mailbox.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>ConnectSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-ConnectSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>AppAuthorizationCode</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Facebook</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>RedirectUri</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-ConnectSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>LinkedIn</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>OAuthVerifier</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>RequestSecret</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>RequestToken</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-ConnectSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnablePoisonSubscription</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-ConnectSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisableAsPoison</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Set-ConnectSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AppAuthorizationCode</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Facebook</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the provider identification number that uniquely identifies the provider network.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LinkedIn</maml:name>
      <maml:description>
        <maml:para>The LinkedIn parameter specifies whether you want to edit a LinkedIn subscription.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OAuthVerifier</maml:name>
      <maml:description>
        <maml:para>The OAuthVerifier parameter specifies the verification code associated with the request token. You must provide a value for the OAuthVerifier parameter and the RequestToken parameter values in exchange for an access token.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RedirectUri</maml:name>
      <maml:description>
        <maml:para>The RedirectUri parameter specifies the host name used to connect to the server running Exchange from outside the firewall.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequestSecret</maml:name>
      <maml:description>
        <maml:para>The RequestSecret parameter specifies the secret associated with the access token.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequestToken</maml:name>
      <maml:description>
        <maml:para>The RequestToken parameter specifies the access token that provides access to protected resources accessible through LinkedIn. You must provide a value for the OAuthVerifier parameter and the RequestToken parameter values in exchange for an access token.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisableAsPoison</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether the people connection is enabled for the specified user.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnablePoisonSubscription</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the mailbox.</maml:para>
        <maml:para>This parameter accepts the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
          <maml:para>Example: JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Canonical DN</maml:para>
          <maml:para>Example: Atlanta.Corp.Contoso.Com/Users/JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display Name</maml:para>
          <maml:para>Example: Jeff Phillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished Name (DN)</maml:para>
          <maml:para>Example: CN=JPhillips,CN=Users,DC=Atlanta,DC=Corp,DC=contoso,DC=com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Domain\Account</maml:para>
          <maml:para>Example: Atlanta\JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
          <maml:para>Example: fb456636-fe7d-4d58-9d15-5af57d0354c2</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Immutable ID</maml:para>
          <maml:para>Example: fb456636-fe7d-4d58-9d15-5af57d0354c2@contoso.com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Legacy Exchange DN</maml:para>
          <maml:para>Example: /o=Contoso/ou=AdministrativeGroup/cn=Recipients/cn=JPhillips</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>SMTP Address</maml:para>
          <maml:para>Example: Jeff.Phillips@contoso.com</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User Principal Name</maml:para>
          <maml:para>Example: JPhillips@contoso.com</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example modifies a people connection to LinkedIn.</maml:para>
        <maml:para />
        <maml:para>Set-ConnectSubscription -LinkedIn $true -OAuthVerifier &lt;OAuthVerifier value&gt; -RequestSecret &lt;Request Secret value&gt; -RequestToken &lt;RequestToken value&gt;</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>When you set up a contact subscription, contacts from the external networking service are integrated into your cloud-based mailbox.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/a13fdafb-1ad8-47ee-b57f-2377d67c01ae(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>a1463ac7-6874-4b6a-92b6-4a7a044c344f
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-Subscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Remove-Subscription cmdlet to remove a Hotmail, POP, or IMAP subscription from a user's cloud-based mailbox.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>Subscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-Subscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the subscription. You can identify the subscription by using one of the following methods:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Specify the globally unique identifier of the subscription, which is its canonical name (CN).</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Use the Mailbox parameter to specify the mailbox that contains the subscription, and then specify the name of the subscription.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can find the identifying values for a subscription, such as Identity and Name, by running this command: Get-Subscription -Mailbox &lt;mailbox&gt;.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that contains the subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the subscription Contoso from the mailbox of the user Kim Akers.</maml:para>
        <maml:para />
        <maml:para>Remove-Subscription Contoso -Mailbox "Kim Akers"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Remove-Subscription cmdlet removes a Hotmail, POP, or IMAP subscription from a user's cloud-based mailbox. It doesn't remove the email messages or contacts previously downloaded to the cloud-based mailbox by the subscription.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/a1463ac7-6874-4b6a-92b6-4a7a044c344f(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>a14fa481-2d32-4031-bc9b-098bd4108118
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-X400AuthoritativeDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-X400AuthoritativeDomain cmdlet to view the configuration information for the X.400 authoritative domains configured in your organization. For more information about how to configure an X.400 authoritative domain, see Set-X400AuthoritativeDomain.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>X400AuthoritativeDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-X400AuthoritativeDomain</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">X400AuthoritativeDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies a string value for the X.400 authoritative domain. Enter either the GUID or the name of the remote domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">X400AuthoritativeDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>X400AuthoritativeDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed information about the X.400 authoritative domain Europe Sales X.400 Domain.</maml:para>
        <maml:para />
        <maml:para>Get-X400AuthoritativeDomain "Europe Sales X.400 Domain" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "X.400 domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/a14fa481-2d32-4031-bc9b-098bd4108118(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>a2b95e01-1adb-4707-b1bb-99131f05ae8b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-AuthRedirect</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-AuthRedirect cmdlet to remove OAuth redirection settings for Microsoft Exchange 2010 Client Access servers in your Microsoft Exchange 2013 organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>AuthRedirect</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-AuthRedirect</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AuthRedirectIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the existing OAuth redirection object that you want to remove. The object name uses the syntax AuthRedirect-Bearer-&lt;GUID&gt;. The easiest way to find the name of the OAuth redirection object is to run Get-AuthRedirect.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AuthRedirectIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AuthRedirectIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the existing OAuth redirection object named AuthRedirect-Bearer-C0B7AC3F-FE64-4B4B-A907-9226F8027CCE.</maml:para>
        <maml:para />
        <maml:para>Remove-AuthRedirect AuthRedirect-Bearer-C0B7AC3F-FE64-4B4B-A907-9226F8027CCE</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example is the same as the first example. However, if you have only one authentication redirection object in your organization, you can use Get-AuthRedirect to pipe the Identity value to the Remove-AuthRedirect cmdlet.</maml:para>
        <maml:para />
        <maml:para>Get-AuthRedirect | Remove-AuthRedirect</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "OAuth authentication redirection settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/a2b95e01-1adb-4707-b1bb-99131f05ae8b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>a8405b09-04aa-4b31-866a-3361bb1ad8b4
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-PopSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>The New-PopSubscription cmdlet allows a user to create POP subscriptions in their own cloud-based mailbox. An administrator can't use this cmdlet to create subscriptions in another user's mailbox.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>PopSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-PopSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>EmailAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>IncomingPassword</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>IncomingServer</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>IncomingUserName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingAuth</maml:name>
        <command:parameterValue required="True">Basic | Spa</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingPort</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingSecurity</maml:name>
        <command:parameterValue required="True">None | Ssl | Tls</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LeaveOnServer</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EmailAddress</maml:name>
      <maml:description>
        <maml:para>The EmailAddress parameter specifies the email address of the POP mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingPassword</maml:name>
      <maml:description>
        <maml:para>The IncomingPassword parameter specifies the password used to sign in to the POP mailbox. You must specify the value for this parameter in a secure format, for example, (ConvertTo-SecureString -String '&lt;password&gt;' -AsPlainText -Force).</maml:para>
      </maml:description>
      <command:parameterValue required="True">SecureString</command:parameterValue>
      <dev:type>
        <maml:name>SecureString</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingServer</maml:name>
      <maml:description>
        <maml:para>The IncomingServer parameter specifies the fully qualified domain name (FQDN) of the POP server, for example, incoming.contoso.com.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingUserName</maml:name>
      <maml:description>
        <maml:para>The IncomingUserName parameter specifies the user name used to sign in to the POP mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the name of the POP subscription. The name of the subscription doesn't have to be globally unique. The name must be unique compared to other subscriptions that exist in the same mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplayName</maml:name>
      <maml:description>
        <maml:para>The DisplayName parameter specifies the friendly name of the POP subscription. If you don't specify a value for the DisplayName parameter, the value of the EmailAddress parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force parameter instructs the command to create the subscription even if those settings can't be verified by the remote POP server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingAuth</maml:name>
      <maml:description>
        <maml:para>The IncomingAuth parameter sets the authentication method used by POP clients to access the POP server. Valid values are Basic or Spa, which is secure password authentication. If you don't specify a value for the IncomingAuth parameter, the value Basic is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Basic | Spa</command:parameterValue>
      <dev:type>
        <maml:name>Basic | Spa</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingPort</maml:name>
      <maml:description>
        <maml:para>The IncomingPort parameter specifies the TCP port number used by POP clients to connect to the POP server. Typical values are 110 for unencrypted connections and 995 for encrypted connections. By default, the value of the IncomingPort parameter is set to 110 if you don't set the IncomingSecurity parameter to Ssl or Tls. If you set the IncomingSecurity parameter to Ssl or Tls, the value of the IncomingPort parameter is set to 995. You can override the default values by specifying an integer for the IncomingPort parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingSecurity</maml:name>
      <maml:description>
        <maml:para>The IncomingSecurity parameter specifies the encryption method used by POP clients to connect to the POP server. Valid values are None, Ssl, or Tls. If you don't specify a value for the IncomingSecurity parameter, the value None is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Ssl | Tls</command:parameterValue>
      <dev:type>
        <maml:name>None | Ssl | Tls</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LeaveOnServer</maml:name>
      <maml:description>
        <maml:para>The LeaveOnServer parameter configures the behavior of retrieved messages in the POP mailbox. When the LeaveOnServer parameter is set to the value $true, the retrieved messages are left in the POP mailbox. When it's set to the value $false, retrieved messages are removed from the POP mailbox. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that contains the POP subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the POP subscription Contoso POP in the mailbox of the user Brian Johnson. The remote POP mailbox has the following details:</maml:para>
        <maml:para />
        <maml:para>Email address: bjohnson@contoso.com</maml:para>
        <maml:para>User name: bjohnson</maml:para>
        <maml:para>Password: Pa$$word1</maml:para>
        <maml:para>POP server: pop.contoso.com</maml:para>
        <maml:para>Authentication method: SSL</maml:para>
        <maml:para>TCP port: 995</maml:para>
        <maml:para>New-PopSubscription -Name "Contoso POP" -EmailAddress bjohnson@contoso.com -IncomingUserName bjohnson -IncomingPassword (ConvertTo-SecureString -String 'Pa$$word1' -AsPlainText -Force) -IncomingServer pop.contoso.com -IncomingSecurity Ssl -IncomingPort 995</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The New-PopSubscription cmdlet creates a connection between a user's cloud-based mailbox and a remote POP mailbox. The cloud-based mailbox periodically polls the POP mailbox for new messages.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/a8405b09-04aa-4b31-866a-3361bb1ad8b4(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>a9c74996-557b-4437-9aeb-658449d4d012
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-Subscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-Subscription cmdlet to view the properties of an existing subscription configured in a user's cloud-based mailbox. This cmdlet is used by Microsoft Office Outlook Web App options to display the list of email subscriptions that the end user has, such as POP, IMAP, Facebook, and LinkedIn.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>Subscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-Subscription</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeReport</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AggregationType</maml:name>
        <command:parameterValue required="True">Aggregation | Mirrored | Migration | PeopleConnection | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SubscriptionType</maml:name>
        <command:parameterValue required="True">Unknown | Pop | DeltaSyncMail | IMAP | AllEMail | Facebook | LinkedIn | AllThatSupportSendAs | AllThatSupportPolicyInducedDeletion | AllThatSupportSendAsAndPeopleConnect | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AggregationType</maml:name>
      <maml:description>
        <maml:para>The AggregationType parameter filters the results by type. The acceptable values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>All</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Aggregation</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Migration</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Mirrored</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PeopleConnection</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Aggregation | Mirrored | Migration | PeopleConnection | All</command:parameterValue>
      <dev:type>
        <maml:name>Aggregation | Mirrored | Migration | PeopleConnection | All</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the subscription. You can identify the subscription by using one of the following methods:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Specify the globally unique identifier of the subscription, which is its canonical name (CN).</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Use the Mailbox parameter to specify the mailbox that contains the subscription, and then specify the name of the subscription.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can find the identifying values for a subscription, such as Identity and Name, by running this command: Get-Subscription -Mailbox &lt;mailbox&gt;.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeReport</maml:name>
      <maml:description>
        <maml:para>The IncludeReport switch specifies whether to return additional details, which can be used for troubleshooting.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that contains the subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the total number of subscriptions to return. If no value is specified, the parameter returns all results that match the filter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SubscriptionType</maml:name>
      <maml:description>
        <maml:para>The SubscriptionType parameter filters the results based on the type of subscription. Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>All</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AllEmail</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AllThatSupportPolicyInducedDeletion</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AllThatSupportSendAs</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AllThatSupportSendAsAndPeopleConnect</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DeltaSyncMail</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Facebook</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>IMAP</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LinkedIn</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Pop</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Unknown</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Unknown | Pop | DeltaSyncMail | IMAP | AllEMail | Facebook | LinkedIn | AllThatSupportSendAs | AllThatSupportPolicyInducedDeletion | AllThatSupportSendAsAndPeopleConnect | All</command:parameterValue>
      <dev:type>
        <maml:name>Unknown | Pop | DeltaSyncMail | IMAP | AllEMail | Facebook | LinkedIn | AllThatSupportSendAs | AllThatSupportPolicyInducedDeletion | AllThatSupportSendAsAndPeopleConnect | All</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all the subscriptions configured in the mailbox of the user Ayla Kol.</maml:para>
        <maml:para />
        <maml:para>Get-Subscription -Mailbox "Ayla Kol"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can view the properties of the subscription, such as the remote server, authentication method, connection status, and the last time a successful synchronization occurred.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/a9c74996-557b-4437-9aeb-658449d4d012(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>aa76264c-249c-4999-8a00-a3704a21d7f4
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-AutodiscoverVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-AutodiscoverVirtualDirectory cmdlet to remove the Autodiscover virtual directory associated with the Autodiscover service on a computer running Microsoft Exchange Server 2013.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>AutodiscoverVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-AutodiscoverVirtualDirectory</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name or GUID of an Autodiscover virtual directory. The Identity parameter is represented as: ServerName\VirtualDirectoryName (WebsiteName).</maml:para>
      </maml:description>
      <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>VirtualDirectoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the Autodiscover virtual directory from the site autodiscover.contoso.com on the Client Access server CAS01.</maml:para>
        <maml:para />
        <maml:para>Remove-AutodiscoverVirtualDirectory -Identity "CAS01\autodiscover(autodiscover.contoso.com)"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Autodiscover virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/aa76264c-249c-4999-8a00-a3704a21d7f4(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>acb5be3d-f42b-4685-ba2a-680731281edf
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-MapiVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-MapiVirtualDirectory cmdlet to create Messaging Application Programming Interface (MAPI) virtual directories on Microsoft Exchange 2013 servers A MAPI virtual directory is used by supported versions of Microsoft Outlook to connect to mailboxes by using the MAPIHTTP protocol.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>MapiVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-MapiVirtualDirectory</maml:name>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionFlags</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionSPNList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionTokenChecking</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IISAuthenticationMethods</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Role</maml:name>
        <command:parameterValue required="True">ClientAccess | Mailbox</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionFlags</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionSPNList</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionTokenChecking</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      <dev:type>
        <maml:name>None | Allow | Require</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalUrl</maml:name>
      <maml:description>
        <maml:para>The ExternalURL parameter specifies the URL that's used to connect to the virtual directory from outside the firewall.</maml:para>
        <maml:para>This setting enforces the Secure Sockets Layer (SSL) protocol and uses the default SSL port. Valid input for this parameter uses the syntax https://&lt;Domain Name&gt;/mapi.</maml:para>
        <maml:para>When you use the InternalUrl or ExternalUrl parameters, you need to specify one or more authentication values by using the IISAuthenticationMethods parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IISAuthenticationMethods</maml:name>
      <maml:description>
        <maml:para>The IISAuthenticationMethods parameter specifies the authentication methods that are enabled on the virtual directory in Internet Information Services (IIS). Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Basic</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Negotiate</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NTLM</maml:para>
        </command:listItem></command:list>
        <maml:para>You can specify multiple values separated by commas.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalUrl</maml:name>
      <maml:description>
        <maml:para>The InternalURL parameter specifies the URL that's used to connect to the virtual directory from inside the firewall.</maml:para>
        <maml:para>This setting enforces the Secure Sockets Layer (SSL) protocol and uses the default SSL port. Valid input for this parameter uses the syntax https://&lt;Domain Name&gt;/mapi.</maml:para>
        <maml:para>When you use the InternalUrl or ExternalUrl parameters, you need to specify one or more authentication values by using the IISAuthenticationMethods parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Role</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ClientAccess | Mailbox</command:parameterValue>
      <dev:type>
        <maml:name>ClientAccess | Mailbox</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server that will host the virtual directory. You can use any value that uniquely identifies the server. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the virtual directory will be created on the server where the remote PowerShell session is established. This will always be a Mailbox server. If you want to create the virtual directory on a Client Access server or another Mailbox server, you need to use the Server parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a new MAPI virtual directory that has the following configuration:</maml:para>
        <maml:para />
        <maml:para>Internal URL https://contoso.com/mapi</maml:para>
        <maml:para>IIS authentication methods NTLM and Negotiate.</maml:para>
        <maml:para>New-MapiVirtualDirectory -InternalUrl https://contoso.com/mapi -IISAuthenticationMethods NTLM,Negotiate</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Client Access virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/acb5be3d-f42b-4685-ba2a-680731281edf(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>ad3910a5-2227-47a2-8ccc-a208ce6210bb
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-TransportConfig</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-TransportConfig cmdlet to modify the transport configuration settings for the whole Exchange organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>TransportConfig</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-TransportConfig</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AddressBookPolicyRoutingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentGeneratedMessageLoopDetectionInSmtpEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AgentGeneratedMessageLoopDetectionInSubmissionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AnonymousSenderToRecipientRatePerHour</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ClearCategories</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConvertDisclaimerWrapperToEml</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DiagnosticsAggregationServicePort</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DSNConversionMode</maml:name>
        <command:parameterValue required="True">UseExchangeDSNs | PreserveDSNBody | DoNotConvert</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDelayDsnEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDsnDefaultLanguage</maml:name>
        <command:parameterValue required="True">CultureInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDsnLanguageDetectionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDsnMaxMessageAttachSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDsnReportingAuthority</maml:name>
        <command:parameterValue required="True">SmtpDomain</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalDsnSendHtml</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalPostmasterAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GenerateCopyOfDSNFor</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HeaderPromotionModeSetting</maml:name>
        <command:parameterValue required="True">NoCreate | MayCreate | MustCreate</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HygieneSuite</maml:name>
        <command:parameterValue required="True">Standard | Premium</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDelayDsnEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDsnDefaultLanguage</maml:name>
        <command:parameterValue required="True">CultureInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDsnLanguageDetectionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDsnMaxMessageAttachSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDsnReportingAuthority</maml:name>
        <command:parameterValue required="True">SmtpDomain</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalDsnSendHtml</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalSMTPServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalArchivingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalingReportNdrTo</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>JournalReportDLMemberSubstitutionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LegacyArchiveJournalingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LegacyArchiveLiveJournalingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LegacyJournalingMigrationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxAllowedAgentGeneratedMessageDepth</maml:name>
        <command:parameterValue required="True">UInt32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxAllowedAgentGeneratedMessageDepthPerAgent</maml:name>
        <command:parameterValue required="True">UInt32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxDumpsterSizePerDatabase</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxDumpsterTime</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxReceiveSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxRecipientEnvelopeLimit</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxRetriesForLocalSiteShadow</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxRetriesForRemoteSiteShadow</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxSendSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MigrationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OpenDomainRoutingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrganizationFederatedMailbox</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>QueueDiagnosticsAggregationInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RedirectDLMessagesForLegacyArchiveJournaling</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RejectMessageOnShadowFailure</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Rfc2231EncodingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SafetyNetHoldTime</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShadowHeartbeatFrequency</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShadowHeartbeatRetryCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShadowHeartbeatTimeoutInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShadowMessageAutoDiscardInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShadowMessagePreferenceSetting</maml:name>
        <command:parameterValue required="True">PreferRemote | LocalOnly | RemoteOnly</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShadowRedundancyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShadowResubmitTimeSpan</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SupervisionTags</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TLSReceiveDomainSecureList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TLSSendDomainSecureList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRuleAttachmentTextScanLimit</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRuleCollectionAddedRecipientsLimit</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRuleCollectionRegexCharsLimit</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRuleLimit</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRuleMinProductVersion</maml:name>
        <command:parameterValue required="True">Version</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRuleRegexValidationTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRuleSizeLimit</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>VerifySecureSubmitEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>VoicemailJournalingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Xexch50Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddressBookPolicyRoutingEnabled</maml:name>
      <maml:description>
        <maml:para>The AddressBookPolicyRoutingEnabled parameter controls how recipients are resolved in an organization that uses address book policies to create separate virtual organizations within the same Exchange organization. Specifically, the global address list (GAL) that's specified in the user's address book policy controls how recipients are resolved. When the value of this parameter is $true, users that are assigned different GALs appear as external recipients. When the value of this parameter is $false, users that are assigned different GALs appear as internal recipients.</maml:para>
        <maml:para>The default value is $false. Note that this parameter has no effect if your organization doesn't use address book policies, or if the address book policy routing agent isn't installed and enabled. Also note that changing the value of this parameter may take up to 30 minutes to take effect. For more information about address book policies, see Address book policies.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentGeneratedMessageLoopDetectionInSmtpEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The AgentGeneratedMessageLoopDetectionInSmtpEnabled parameter controls the behavior of messages loop detection in for loops caused by transport agents in the Transport service. An agent-generated loop occurs when an agent creates a new copy of a message or adds recipients to a message, and the agent continues to process these resulting messages by creating copies or adding recipients.</maml:para>
        <maml:para>Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>When Exchange detects an agent-generated message loop, the loop is stopped. When this parameter is set to $false, the loop is logged in the message tracking log. When this parameter is set to $true, the message is rejected with an NDR when the loop generates the number of messages specified by the MaxAllowedAgentGeneratedMessageDepth and MaxAllowedAgentGeneratedMessageDepthPerAgent parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AgentGeneratedMessageLoopDetectionInSubmissionEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The AgentGeneratedMessageLoopDetectionInSubmissionEnabled parameter controls the behavior of messages loop detection in for loops caused by transport agents in the Mailbox Transport Submission service. An agent-generated loop occurs when an agent creates a new copy of a message or adds recipients to a message, and the agent continues to process these resulting messages by creating copies or adding recipients.</maml:para>
        <maml:para>Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
        <maml:para>When Exchange detects an agent-generated message loop, the loop is stopped. When this parameter is set to $true, the loop is logged in the message tracking log. When this parameter is set to $false, the message is rejected with an NDR when the loop generates the number of messages specified by the MaxAllowedAgentGeneratedMessageDepthPerAgent and MaxAllowedAgentGeneratedMessageDepth parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AnonymousSenderToRecipientRatePerHour</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ClearCategories</maml:name>
      <maml:description>
        <maml:para>The ClearCategories parameter keeps or removes Microsoft Outlook message categories during content conversion. Valid input for this parameter is $true or $false. The default value is $true. This means that by default, Outlook message categories are removed during content conversion.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConvertDisclaimerWrapperToEml</maml:name>
      <maml:description>
        <maml:para>The ConvertDisclaimerWrapperToEml parameter specifies whether the original message will be added as a TNEF attachment or a regular EML attachment to a disclaimer when all of the following are true:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Message is sent to an external user.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The sender has signed the message.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The message is processed by a Transport rule that adds a disclaimer.</maml:para>
        </command:listItem></command:list>
        <maml:para>When a Transport rule that adds disclaimers to outbound messages encounters a message signed by the sender, the Transport rule can't add the disclaimer directly to the message. As a result, the disclaimer is sent to the intended recipient with the original message as an attachment.</maml:para>
        <maml:para>Valid input for this parameter is $true or $false. The default value is $false. If you set this parameter to $true, the original message is sent as an EML attachment. Otherwise, it is sent as a TNEF attachment.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DiagnosticsAggregationServicePort</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DiagnosticsAggregationServicePort parameter specifies the TCP port that's used to collect message queue diagnostic information. The default value is 9710.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DSNConversionMode</maml:name>
      <maml:description>
        <maml:para>The DSNConversionMode parameter controls how Exchange handles delivery status notifications (DSNs) that are generated by earlier versions of Exchange or non-Exchange messaging systems. You can specify one of the following values for this parameter:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>UseExchangeDSNs</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PreserveDSNBody</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>DoNotConvert</maml:para>
        </command:listItem></command:list>
        <maml:para>By default, this parameter is set to UseExchangeDSNs and Exchange converts the DSNs to the Exchange 2013 DSN format, which is the same as the Exchange 2010 DSN format. Any customized text or attachments that were associated with the original DSN are overwritten.</maml:para>
        <maml:para>If you set this parameter to PreserveDSNBody, Exchange converts the DSNs to Exchange 2013 DSN format. However, the text in the body of the DSN message is retained.</maml:para>
        <maml:para>If you set this parameter to DoNotConvert, Exchange does not modify the DSN message. Instead, Exchange delivers the message as a standard message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">UseExchangeDSNs | PreserveDSNBody | DoNotConvert</command:parameterValue>
      <dev:type>
        <maml:name>UseExchangeDSNs | PreserveDSNBody | DoNotConvert</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDelayDsnEnabled</maml:name>
      <maml:description>
        <maml:para>The ExternalDelayDsnEnabled parameter specifies whether a delay delivery status notification (DSN) message should be created for external messages that couldn't be immediately delivered. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDsnDefaultLanguage</maml:name>
      <maml:description>
        <maml:para>The ExternalDsnDefaultLanguage parameter specifies which Exchange server language should be used by default when you create external DSN messages. The default value is the default Windows server language.</maml:para>
      </maml:description>
      <command:parameterValue required="True">CultureInfo</command:parameterValue>
      <dev:type>
        <maml:name>CultureInfo</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDsnLanguageDetectionEnabled</maml:name>
      <maml:description>
        <maml:para>The ExternalDsnLanguageDetectionEnabled parameter specifies whether the server should try to send an external DSN message in the same language as the original message that generated the notification. Valid input for this parameter is $true or $false.The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDsnMaxMessageAttachSize</maml:name>
      <maml:description>
        <maml:para>The ExternalDsnMaxMessageAttachSize parameter specifies the maximum size of the original message attached to an external DSN message. If the original message exceeds this size, only the headers of the original message are included in the DSN message. The default value is 10 megabytes (MB).</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 0 through 2147483647 bytes. If you specify a value of 0, only the original message headers are included in the external DSN message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDsnReportingAuthority</maml:name>
      <maml:description>
        <maml:para>The ExternalDsnReportingAuthority parameter specifies what the server name should be in the machine-readable part of the external DSN message. The default value is the authoritative domain specified during installation.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpDomain</command:parameterValue>
      <dev:type>
        <maml:name>SmtpDomain</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalDsnSendHtml</maml:name>
      <maml:description>
        <maml:para>The ExternalDsnSendHtml parameter specifies whether external DSN messages should be sent by using HTML or whether messages should be sent in plain text. Valid input for this parameter is $true or $false.The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalPostmasterAddress</maml:name>
      <maml:description>
        <maml:para>The ExternalPostmasterAddress parameter specifies the email address in the From header field of an external DSN message. The default value is $null. In the Transport service on a Mailbox server, the value of the external postmaster email address is postmaster@&lt;defaultaccepteddomain&gt;. If an Edge Transport server hasn't yet been through the EdgeSync process, and the ExternalPostmasterAddress parameter is set to $null, the external postmaster email address on the Edge Transport server is postmaster@&lt;edgetransportserverfqdn&gt;. If an Edge Transport server has completed the EdgeSync process, and the ExternalPostmasterAddress parameter is set to $null, the external postmaster email address on the Edge Transport server is postmaster@&lt;defaultaccepteddomain&gt;. To override the default behavior, you can specify an email address for the ExternalPostMasterAddress parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GenerateCopyOfDSNFor</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The GenerateCopyOfDSNFor parameter controls the non-delivery reports (NDRs) that are copied to a mailbox by specifying the DSN codes that you want to monitor. You must configure the list of monitored DSNs on one Mailbox server and locally on each Edge Transport server in your Exchange organization.</maml:para>
        <maml:para>On a Mailbox server, NDRs are copied to the mailbox assigned to the Exchange recipient. On Edge Transport servers, NDRs are copied to the mailbox assigned to the external postmaster address.</maml:para>
        <maml:para>DSN codes are entered as x.y.z and are separated by commas. By default, the following DSN codes are monitored:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>5.4.8</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>5.4.6</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>5.4.4</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>5.2.4</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>5.2.0</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>5.1.4</maml:para>
        </command:listItem></command:list>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
        <maml:para>Although these DSN codes are monitored by default, the associated NDRs aren't copied to the Exchange recipient or to the external postmaster address if no mailbox is assigned to the Exchange recipient or to the external postmaster address. By default, no mailbox is assigned to the Exchange recipient or to the external postmaster address.</maml:para>
        <maml:para>To assign a mailbox to the Exchange recipient, use the Set-OrganizationConfig cmdlet with the MicrosoftExchangeRecipientReplyRecipient parameter. To assign a mailbox to the external postmaster address, create a new mailbox postmaster. The default email address policy of the Exchange organization should automatically add an SMTP address of postmaster@&lt;Authoritative domain&gt; to the mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HeaderPromotionModeSetting</maml:name>
      <maml:description>
        <maml:para>The HeaderPromotionModeSetting parameter specifies whether named properties are created for custom X-headers on messages received from outside the Exchange organization. You can use one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>MustCreate Exchange creates a named property for each new custom X-header.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MayCreate Exchange creates a named property for each new custom X-header on messages received from authenticated senders. No named properties are created for custom X-headers on messages received from unauthenticated senders.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NoCreate Exchange won't create any named properties based on custom X-headers on incoming messages.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">NoCreate | MayCreate | MustCreate</command:parameterValue>
      <dev:type>
        <maml:name>NoCreate | MayCreate | MustCreate</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HygieneSuite</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Standard | Premium</command:parameterValue>
      <dev:type>
        <maml:name>Standard | Premium</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDelayDsnEnabled</maml:name>
      <maml:description>
        <maml:para>The InternalDelayDsnEnabled parameter specifies whether a delay DSN message should be created for messages sent to or from recipients or senders in the same Exchange organization that couldn't be immediately delivered. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDsnDefaultLanguage</maml:name>
      <maml:description>
        <maml:para>The InternalDsnDefaultLanguage parameter specifies which Exchange server language should be used by default when you create internal DSN messages. The default value is the default Windows server language.</maml:para>
      </maml:description>
      <command:parameterValue required="True">CultureInfo</command:parameterValue>
      <dev:type>
        <maml:name>CultureInfo</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDsnLanguageDetectionEnabled</maml:name>
      <maml:description>
        <maml:para>The InternalDsnLanguageDetectionEnabled parameter specifies whether the server should try to send an internal DSN message in the same language as the original message that generated the notification. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDsnMaxMessageAttachSize</maml:name>
      <maml:description>
        <maml:para>The InternalDsnMaxMessageAttachSize parameter specifies the maximum size of the original message that generated an internal DSN message. If the original message exceeds this size, only the headers of the original message are included in the DSN message. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 0 through 2147483647 bytes. If you specify a value of 0, only the original message headers are included in the internal DSN message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDsnReportingAuthority</maml:name>
      <maml:description>
        <maml:para>The InternalDsnReportingAuthority parameter specifies what the server name should be in the internal DSN message. The default value is the authoritative domain specified during installation.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpDomain</command:parameterValue>
      <dev:type>
        <maml:name>SmtpDomain</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalDsnSendHtml</maml:name>
      <maml:description>
        <maml:para>The InternalDsnSendHtml parameter specifies whether internal DSN messages should be sent by using HTML or whether messages should be sent in plain text. Valid input for this parameter is $true or $false. The default is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalSMTPServers</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The InternalSMTPServers parameter specifies a list of internal SMTP server IP addresses or IP address ranges that should be ignored by Sender ID and connection filtering.</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalArchivingEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalingReportNdrTo</maml:name>
      <maml:description>
        <maml:para>The JournalingReportNdrTo parameter specifies the email address to which journal reports are sent if the journaling mailbox is unavailable. By default, if this parameter is left empty, Exchange continues to try to deliver the journal report to the journaling mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>JournalReportDLMemberSubstitutionEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LegacyArchiveJournalingEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LegacyArchiveLiveJournalingEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LegacyJournalingMigrationEnabled</maml:name>
      <maml:description>
        <maml:para>The LegacyJournalingMigrationEnabled parameter specifies whether journal messages generated in Microsoft Exchange Server 2003 will be reformatted by the current version of Exchange.</maml:para>
        <maml:para>Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxAllowedAgentGeneratedMessageDepth</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MaxAllowedAgentGeneratedMessageDepth parameter specifies how many times all agents can process any resulting copies of the same message. The default value is 3. Valid input for this parameter is an integer.</maml:para>
      </maml:description>
      <command:parameterValue required="True">UInt32</command:parameterValue>
      <dev:type>
        <maml:name>UInt32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxAllowedAgentGeneratedMessageDepthPerAgent</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MaxAllowedAgentGeneratedMessageDepthPerAgent parameter specifies how many times a single agent can process any resulting copies of the same message. The default value is 2.</maml:para>
        <maml:para>The value of the MaxAllowedAgentGeneratedMessageDepth parameter should be larger than the value of the MaxAllowedAgentGeneratedMessageDepthPerAgent parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">UInt32</command:parameterValue>
      <dev:type>
        <maml:name>UInt32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxDumpsterSizePerDatabase</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>This parameter isn't used by Microsoft Exchange Server 2013. It's only used by Microsoft Exchange 2010 servers in a coexistence environment.</maml:para>
        <maml:para>The MaxDumpsterSizePerDatabase parameter specifies the maximum size of the transport dumpster on a Hub Transport server for each database. The default value is 18 MB. The valid input range for this parameter is from 0 through 2147483647 KB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>To enable the transport dumpster, the value of the MaxDumpsterSizePerDatabase parameter must be greater than 0, and the value of the MaxDumpsterTime parameter must be greater than 00:00:00.</maml:para>
        <maml:para>This parameter has no replacement in Exchange 2013.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxDumpsterTime</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>This parameter isn't used by Microsoft Exchange Server 2013. It's only used by Microsoft Exchange 2010 servers in a coexistence environment.</maml:para>
        <maml:para>The MaxDumpsterTime parameter specifies how long an email message should remain in the transport dumpster on a Hub Transport server. The default value is seven days.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify 10 days for this parameter, use 10.00:00:00. The valid input range for this parameter is 00:00:00 to 24855.03:14:07.</maml:para>
        <maml:para>To enable the transport dumpster, the value of the MaxDumpsterSizePerStorageGroup parameter must be greater than 0, and the value of the MaxDumpsterTime parameter must be greater than 00:00:00.</maml:para>
        <maml:para>This parameter is replaced by the SafetyNetHoldTime parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxReceiveSize</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MaxReceiveSize parameter specifies the maximum message size that can be received by recipients in the organization. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 0 through 2097151 KB. If you enter a value of Unlimited, no limit is imposed on the message size that can be received by recipients in the organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxRecipientEnvelopeLimit</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MaxRecipientEnvelopeLimit parameter specifies the maximum number of recipients in a message. The default value is 5000. The valid input range for this parameter is from 0 through 2147483647. If you enter a value of Unlimited, no limit is imposed on the number of recipients in a message. Exchange treats an unexpanded distribution group as one recipient.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxRetriesForLocalSiteShadow</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MaxRetriesForLocalSiteShadow parameter specifies the maximum number of attempts to make a shadow copy of the message in the local Active Directory site. Valid input for this parameter is an integer between 0 and 255. The default value is 2. The total number of attempts to create a shadow copy of the message is controlled by the ShadowMessagePreferenceSetting parameter:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>If ShadowMessagePreferenceSetting is set to LocalOnly, the total number of attempts to make a shadow copy of the message is the value of the MaxRetriesForLocalSiteShadow parameter.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>If ShadowMessagePreferenceSetting is set to PreferRemote, the total number of attempts to make a shadow copy of the message is the value of the MaxRetriesForLocalSiteShadow and MaxRetriesForRemoteSiteShadow parameters added together.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>If ShadowMessagePreferenceSetting is set to RemoteOnly, the value of MaxRetriesForLocalSiteShadow is 0, and the MaxRetriesForLocalSiteShadow parameter has no effect on the total number of attempts to create a shadow copy of the message.</maml:para>
        </command:listItem></command:list>
        <maml:para>If a shadow copy of the message isn't created after the specified number of attempts, accepting or rejecting the message is controlled by the RejectMessageOnShadowFailure parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxRetriesForRemoteSiteShadow</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MaxRetriesForRemoteSiteShadow parameter specifies the maximum number of attempts to make a shadow copy of the message in a different Active Directory site. Valid input for this parameter is an integer between 0 and 255. The default value is 4. The total number of attempts to create a shadow copy of the message is controlled by the ShadowMessagePreferenceSetting parameter:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>If ShadowMessagePreferenceSetting is set to RemoteOnly, the total number of attempts to make a shadow copy of the message is the value of the MaxRetriesForRemoteSiteShadow parameter.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>If ShadowMessagePreferenceSetting is set to PreferRemote, the total number of attempts to make a shadow copy of the message is the value of the MaxRetriesForLocalSiteShadow and MaxRetriesForRemoteSiteShadow parameters added together.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>If ShadowMessagePreferenceSetting is set to LocalOnly, the value of MaxRetriesForRemoteSiteShadow is 0, and the MaxRetriesForRemoteSiteShadow parameter has no effect on the total number of attempts to create a shadow copy of the message.</maml:para>
        </command:listItem></command:list>
        <maml:para>If a shadow copy of the message isn't created after the specified number of attempts, accepting or rejecting the message is controlled by the RejectMessageOnShadowFailure parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxSendSize</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The MaxSendSize parameter specifies the maximum message size that can be sent by senders in the organization. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 0 through 2097151 KB. If you enter a value of Unlimited, no limit is imposed on the message size that can be sent by senders in the organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MigrationEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OpenDomainRoutingEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OrganizationFederatedMailbox</maml:name>
      <maml:description>
        <maml:para>The OrganizationFederatedMailbox parameter specifies the SMTP address of the federated mailbox used for federated delivery with other organizations.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>QueueDiagnosticsAggregationInterval</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The QueueDiagnosticsAggregationInterval parameter specifies the polling interval that's used to retrieve message queue diagnostic information. The default value is 00:01:00 or one minute.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RedirectDLMessagesForLegacyArchiveJournaling</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RejectMessageOnShadowFailure</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The RejectMessageOnShadowFailure parameter accepts or rejects messages when a shadow copy of a message can't be created. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
        <maml:para>When this parameter is set to $true, messages are rejected with the SMTP code 450 4.5.1. When this parameter is set to $false, the message is accepted without making a shadow copy.</maml:para>
        <maml:para>The number of attempts to make a shadow copy of the message and where to make the shadow copy are controlled by the MaxRetriesForLocalSiteShadow, MaxRetriesForRemoteSiteShadow, and ShadowMessagePreferenceSetting parameter settings.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Rfc2231EncodingEnabled</maml:name>
      <maml:description>
        <maml:para>The Rfc2231EncodingEnabled parameter specifies whether the RFC 2231 encoding of MIME parameters for outbound messages is enabled in your organization. Valid input for this parameter is $true or $false. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SafetyNetHoldTime</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The SafetyNetHoldTime parameter specifies how long a copy of a successfully processed message is retained in Safety Net. Unacknowledged shadow copies of messages auto-expire from Safety Net based on adding the values of the SafetyNetHoldTime parameter and the MessageExpirationTimeout parameter on the Set-TransportService cmdlet.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>The default value is 2.00:00:00 or 2 days.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShadowHeartbeatFrequency</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The ShadowHeartbeatFrequency parameter specifies the amount of time a server waits before establishing a connection to a primary server to query the discard status of shadow messages.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Valid input for this parameter is 00:00:01 to 1.00:00:00. The default value is 00:02:00 or 2 minutes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShadowHeartbeatRetryCount</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>This parameter isn't used by Microsoft Exchange Server 2013. It's only used by Microsoft Exchange 2010 servers in a coexistence environment.</maml:para>
        <maml:para>The ShadowHeartbeatRetryCount parameter specifies the number of time-outs a server waits before deciding that a primary server has failed and assumes ownership of shadow messages in the shadow queue for the primary server that's unreachable. Valid input for this parameter is an integer between 1 and 15. The default value is 12.</maml:para>
        <maml:para>This parameter is replaced by the ShadowResubmitTimeSpan parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShadowHeartbeatTimeoutInterval</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>This parameter isn't used by Microsoft Exchange Server 2013. It's only used by Microsoft Exchange 2010 servers in a coexistence environment.</maml:para>
        <maml:para>The ShadowHeartbeatTimeoutInterval parameter specifies the amount of time a server waits before establishing a connection to a primary server to query the discard status of shadow messages.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Valid input for this parameter is 00:00:01 to 1.00:00:00. The default value is 00:15:00 or 15 minutes.</maml:para>
        <maml:para>This parameter is replaced by the ShadowHeartbeatFrequency parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShadowMessageAutoDiscardInterval</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The ShadowMessageAutoDiscardInterval parameter specifies how long a server retains discard events for shadow messages. A primary server queues discard events until queried by the shadow server. However, if the shadow server doesn't query the primary server for the duration specified in this parameter, the primary server deletes the queued discard events.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Valid input for this parameter is 00:00:05 to 90.00:00:00. The default value is 2.00:00:00 or 2 days.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShadowMessagePreferenceSetting</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The ShadowMessagePreferenceSetting parameter specifies the preferred location for making a shadow copy of a message. Valid values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>LocalOnly: A shadow copy of the message should only be made on a server in the local Active Directory site.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RemoteOnly: A shadow copy of the message should only be made on a server in a different Active Directory site.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PreferRemote: Try to make a shadow copy of the message in a different Active Directory site. If the operation fails, try make a shadow copy of the message on a server in the local Active Directory site.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value is PreferRemote.</maml:para>
      </maml:description>
      <command:parameterValue required="True">PreferRemote | LocalOnly | RemoteOnly</command:parameterValue>
      <dev:type>
        <maml:name>PreferRemote | LocalOnly | RemoteOnly</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShadowRedundancyEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The ShadowRedundancyEnabled parameter specifies whether shadow redundancy is enabled in the organization. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShadowResubmitTimeSpan</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The ShadowResubmitTimeSpan parameter specifies amount of time a server waits before deciding that a primary server has failed and assumes ownership of shadow messages in the shadow queue for the primary server that's unreachable.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>Valid input for this parameter is 00:00:01 to 1.00:00:00. The default value is 03:00:00 or 3 hours.</maml:para>
        <maml:para>This parameter replaces the ShadowHeartbeatRetryCount parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SupervisionTags</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The SupervisionTags parameter specifies the various tags that are used for transport supervision in the organization.</maml:para>
        <maml:para>When you install Exchange, two tags, Allow and Reject, are created by default.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TLSReceiveDomainSecureList</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The TLSReceiveDomainSecureList parameter specifies the domains from which you want to receive domain secured email by using mutual Transport Layer Security (TLS) authentication. To fully support mutual TLS authentication, you must also perform the following steps:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Enable Domain Security (Mutual Auth TLS) and the TLS authentication method on the Receive connectors that receive messages from the domains that you specified with the TLSReceiveDomainSecureList parameter.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Specify the domains to which you want to send domain secured email by using the TLSSendDomainSecureList parameter.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Enable Domain Security (Mutual Auth TLS) on the Send connectors that send messages to the domains that you specified in the TLSSendDomainSecureList parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
        <maml:para>The wildcard character (*) isn't supported in the domains listed in the TLSReceiveDomainSecureList parameter or in the TLSSendDomainSecureList parameter. The default value for both parameters is an empty list ({}).</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TLSSendDomainSecureList</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The TLSSendDomainSecureList parameter specifies the domains from which you want to send domain secured email by using mutual TLS authentication. To fully support mutual TLS authentication, you must also perform the following steps:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Enable Domain Security (Mutual Auth TLS) on the Send connectors that send messages to the domains that you specified in the TLSSendDomainSecureList parameter.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Specify the domains from which you want to receive domain secured email by using the TLSReceiveDomainSecureList parameter.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Enable Domain Security (Mutual Auth TLS) and the TLS authentication method on the Receive connectors that receive messages from the domains that you specified in the TLSReceiveDomainSecureList parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
        <maml:para>Multiple domains may be separated by commas. The wildcard character (*) isn't supported in the domains listed in the TLSSendDomainSecureList parameter or in the TLSReceiveSecureList parameter. The default values for both parameters are an empty list ({}).</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportRuleAttachmentTextScanLimit</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The TransportRuleAttachmentTextScanLimit parameter specifies the maximum size of text to extract from attachments for scanning by attachment scanning predicates in transport rules and data loss prevention (DLP) policies. The default value is 150 kilobytes (KB).</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>If the amount of text in the attachment is larger than the value of this parameter, only the specified amount of text is scanned. For example, if a 5 megabyte attachment contains 300 kilobytes of text, and the value of TransportRuleAttachmentTextScanLimit is 150 kilobytes, only the first 150 kilobytes of text are extracted and scanned.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportRuleCollectionAddedRecipientsLimit</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportRuleCollectionRegexCharsLimit</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportRuleLimit</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportRuleMinProductVersion</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Version</command:parameterValue>
      <dev:type>
        <maml:name>Version</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportRuleRegexValidationTimeout</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportRuleSizeLimit</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>VerifySecureSubmitEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The VerifySecureSubmitEnabled parameter verifies that email clients submitting messages from mailboxes on Mailbox servers are using encrypted MAPI submission. The valid values for this parameter are $true or $false. The default value is $false</maml:para>
        <maml:para>If the VerifySecureSubmitEnabled parameter is set to $true, and Outlook 2010 or later is used to submit the message, the message is marked as secure. If a previous version of Outlook is used to submit the message, the message is marked as anonymous.</maml:para>
        <maml:para>If the VerifySecureSubmitEnabled parameter is set to $false, all MAPI message submissions are marked as secure. Messages submitted from mailboxes on the Mailbox server by using any MAPI client aren't checked for encrypted MAPI submission. If you use previous Outlook versions in your Exchange organization, you should set the VerifySecureSubmitEnabled parameter to $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>VoicemailJournalingEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The VoicemailJournalingEnabled parameter specifies whether Unified Messaging voice mail messages are journaled by the Journaling agent. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Xexch50Enabled</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The Xexch50Enabled parameter specifies whether Xexch50 authentication should be enabled for backward compatibility with computers running Exchange 2003. Valid input for this parameter is $true or $false. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example configures the Exchange organization to forward all DSN messages that have the DSN codes 5.7.1, 5.7.2, and 5.7.3 to the postmaster email account.</maml:para>
        <maml:para />
        <maml:para>Set-TransportConfig -GenerateCopyOfDSNFor 5.7.1,5.7.2,5.7.3</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example configures the Exchange organization to redirect all journaling reports that can't be delivered to the journaling mailbox to the email account journalingndr@contoso.com.</maml:para>
        <maml:para />
        <maml:para>Set-TransportConfig -JournalingReportNdrTo journalingndr@contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport configuration" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/ad3910a5-2227-47a2-8ccc-a208ce6210bb(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>ae2ac9a4-1951-4176-baa6-06839cdd64a0
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-WebServicesVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-WebServicesVirtualDirectory cmdlet to remove an existing virtual directory from a computer running Microsoft Exchange Server 2013.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>WebServicesVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-WebServicesVirtualDirectory</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies a virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>VirtualDirectoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to force the command to execute without asking for user confirmation. If set to $true, this parameter forces the command to execute without asking for user confirmation.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the virtual directory Sales from the server CAS01.</maml:para>
        <maml:para />
        <maml:para>Remove-WebServicesVirtualDirectory -Identity CAS01\Sales</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can remove the default Exchange Web Services virtual directory or another Exchange Web Services virtual directory.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Exchange Web Services virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/ae2ac9a4-1951-4176-baa6-06839cdd64a0(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>af3b6cc3-eb86-41d9-a643-171e36a3482d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-AdSite</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-AdSite cmdlet to display configuration information about one or more Active Directory sites.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>AdSite</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-AdSite</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AdSiteIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the identity of the Active Directory site for which you want to view configuration details. The identity can be expressed as a GUID or the Active Directory site name. If the Active Directory site name includes spaces, enclose the name in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">AdSiteIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AdSiteIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays the configuration details for the Active Directory site named Default-First-Site-Name.</maml:para>
        <maml:para />
        <maml:para>Get-AdSite Default-First-Site-Name</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Exchange uses Active Directory sites and the costs assigned to the Active Directory site links to make message routing decisions.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport configuration" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/af3b6cc3-eb86-41d9-a643-171e36a3482d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>b01d44c2-d9f9-4d58-9ce3-2db3e998ed25
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-OutlookProvider</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-OutlookProvider cmdlet to delete the AutoDiscoverConfig object from Active Directory.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>OutlookProvider</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-OutlookProvider</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OutlookProviderIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the AutoDiscoverConfig object to remove from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OutlookProviderIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OutlookProviderIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example deletes the AutoDiscoverConfig object named Test Object from Active Directory.</maml:para>
        <maml:para />
        <maml:para>Remove-OutlookProvider -Identity "Test Object"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Remove-OutlookProvider cmdlet deletes the AutoDiscoverConfig object under the Global Settings object in Active Directory.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Autodiscover service configuration settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/b01d44c2-d9f9-4d58-9ce3-2db3e998ed25(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>b160bc1d-7691-4b58-b85c-09759362fa99
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-OutlookAnywhere</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-OutlookAnywhere cmdlet to retrieve all Outlook Anywhere settings on a computer running Microsoft Exchange Server 2013.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>OutlookAnywhere</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-OutlookAnywhere</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADPropertiesOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowBackEndVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowMailboxVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-OutlookAnywhere</maml:name>
      <command:parameter required="True">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ADPropertiesOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowBackEndVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ShowMailboxVirtualDirectories</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the name or GUID of the server for which you want to display the settings. This parameter is required if you aren't running the Get-OutlookAnywhere cmdlet on a server that has the Client Access server role installed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ADPropertiesOnly</maml:name>
      <maml:description>
        <maml:para>The ADPropertiesOnly switch specifies whether to return only the properties about the virtual directory stored in Active Directory. The properties stored in the Internet Information Services (IIS) metabase aren't returned.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name or GUID of the virtual directory. It's represented as: ServerName\VirtualDirectoryName (WebsiteName).</maml:para>
      </maml:description>
      <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>VirtualDirectoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShowMailboxVirtualDirectories</maml:name>
      <maml:description>
        <maml:para>The ShowMailboxVirtualDirectories switch returns virtual directories on Client Access servers when used in a query. If you don't use this parameter, only virtual directories on Mailbox servers are returned.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ShowBackendVirtualDirectories</maml:name>
      <maml:description>
        <maml:para>The ShowBackendVirtualDirectories switch specifies whether to list the virtual directories located on the Mailbox servers within the organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example uses the Server and Identity parameters to retrieve all Outlook Anywhere settings on the server CAS01.</maml:para>
        <maml:para />
        <maml:para>Get-OutlookAnywhere -Server CAS01</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays all Outlook Anywhere settings for the server EXCH01.</maml:para>
        <maml:para />
        <maml:para>Get-OutlookAnywhere -Identity "EXCH01\rpc (Default Web Site)"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Outlook Anywhere configuration (enable, disable, change, view)" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/b160bc1d-7691-4b58-b85c-09759362fa99(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>b2c57a7e-bd6d-461d-8a9d-5384a715344b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-SendAddress</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-SendAddress cmdlet to view the email addresses on a user's mailbox that can be configured as the default From address. This cmdlet is primarily used by the OWA &gt; Options &gt; Connected Accounts user interface and should not be run in the Shell.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>SendAddress</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-SendAddress</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">SendAddressIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-SendAddress</maml:name>
      <command:parameter required="False">
        <maml:name>AddressId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddressId</maml:name>
      <maml:description>
        <maml:para>The AddressId parameter specifies the email address. The value of AddressId is in the following formats:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>The user's primary email address is displayed as an email address, for example, bob@contoso.com.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The email address of a POP, IMAP, or Hotmail subscription is displayed as a GUID.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>No default From address is set. This is represented by the value $null.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can find the values of the AddressId parameter on a user's mailbox by running the command Get-SendAddress -Mailbox &lt;mailbox&gt;.</maml:para>
        <maml:para>If you use the AddressId parameter, you must also use the Mailbox parameter. If you use the AddressId parameter, you can't use the Identity parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the mailbox and the email address. The value of the Identity parameter is in the format &lt;mailbox&gt;\&lt;address&gt;. The &lt;mailbox&gt; part is any value that uniquely identifies the mailbox. The &lt;address&gt; part is in one following formats:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>The user's primary email address is displayed as an email address, for example, bob@contoso.com.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The email address of a POP, IMAP, or Hotmail subscription is displayed as a GUID.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>No default From address is set. This is represented by a blank value.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can find the values of the Identity parameter on a user's mailbox by running the command Get-SendAddress -Mailbox &lt;mailbox&gt;.</maml:para>
        <maml:para>If you use the Identity parameter, you can't use the AddressId parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SendAddressIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>SendAddressIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the mailbox. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all the email addresses of the user Diane Prescott that can be used as the default From address.</maml:para>
        <maml:para />
        <maml:para>Get-SendAddress -Mailbox "Diane Prescott"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Configuring a default From address only makes sense if the user has POP, IMAP, or Hotmail subscriptions configured on the mailbox. If you don't specify a value for the default From address, the default behavior is:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>The primary email address on the user's mailbox is used for all new messages.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>The To address of the incoming message is used as the From address for all replies or forwarded messages.</maml:para>
    </command:listItem></command:list>
    <maml:para>The only email addresses that can be configured as the default From address are:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>The user's primary email address.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>The email addresses of a user's POP, IMAP, or Hotmail subscription.</maml:para>
    </command:listItem></command:list>
    <maml:para>You set the user's default From address in the SendAddressDefault parameter on the Set-MailboxMessageConfiguration cmdlet. Users can override the default From address when they create an email message in Microsoft Office Outlook Web App.</maml:para>
    <maml:para>The Get-SendAddress and Set-MailboxMessageConfiguration cmdlets represent the email addresses of POP, IMAP, or Hotmail subscriptions as a GUID. It's easier to configure a user's default From address in Outlook Web App &gt; Options &gt; Account &gt; Connected Accounts.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/b2c57a7e-bd6d-461d-8a9d-5384a715344b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>b5741539-21d0-475d-b4a7-c6355d7b1c0b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-TransportPipeline</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-TransportPipeline cmdlet to view each transport agent and the event with which the transport agent is registered.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>TransportPipeline</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-TransportPipeline</maml:name>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a list of agents registered in the transport pipeline.</maml:para>
        <maml:para />
        <maml:para>Get-TransportPipeline</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a list of agents registered in the transport pipeline with full details for each transport event.</maml:para>
        <maml:para />
        <maml:para>Get-TransportPipeline | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-TransportPipeline cmdlet enables you to view all the transport agents configured in the following locations:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>In the Transport service on a Mailbox server.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>In the Front End Transport service on a Client Access server.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>On an Edge Transport server in the perimeter network.</maml:para>
    </command:listItem></command:list>
    <maml:para>The associated transport service must be started, and at least one e-mail message must be sent through the server since the last service restart before the transport pipeline can be viewed. Only the transport events and agents that were involved in the processing of e-mail messages since the associated service was last restarted are returned.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport agents" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/b5741539-21d0-475d-b4a7-c6355d7b1c0b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>b579682a-9922-4db0-b524-bcea0d2cef9b
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-Fingerprint</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the New-Fingerprint cmdlet to create document fingerprints that are used with data classification rules. Because the results of New-Fingerprint are not stored outside of the data classification rule, you always run New-Fingerprint and New-DataClassification or Set-Dataclassification in the same PowerShell session.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>Fingerprint</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-Fingerprint</maml:name>
      <command:parameter required="True">
        <maml:name>Description</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FileData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Description</maml:name>
      <maml:description>
        <maml:para>The Description parameter specifies a description for the document fingerprint.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="1">
      <maml:name>FileData</maml:name>
      <maml:description>
        <maml:para>The FileData parameter specifies the file to use as a document fingerprint.</maml:para>
        <maml:para>You need to read the file to a byte-encoded object using the Get-Content cmdlet. For details, see the section.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a new document fingerprint based on the file C:\My Documents\Contoso Patent Template.docx. You store the new fingerprint as a variable so you can use it with the New-DataClassification cmdlet in the same PowerShell session.</maml:para>
        <maml:para />
        <maml:para>$Patent_Template = Get-Content "C:\My Documents\Contoso Patent Template.docx" -Encoding byte</maml:para>
        <maml:para>$Patent_Fingerprint = New-Fingerprint -FileData $Patent_Template -Description "Contoso Patent Template"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Classification rule packages are used by data loss prevention (DLP) to detect sensitive content in messages.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/b579682a-9922-4db0-b524-bcea0d2cef9b(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>bb58853a-b51e-4f90-b88f-c5adda88d14d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-X400AuthoritativeDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-X400AuthoritativeDomain cmdlet to remove an X.400 authoritative domain. When you remove an X.400 authoritative domain, the X.400 authoritative domain object is deleted from Active Directory.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>X400AuthoritativeDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-X400AuthoritativeDomain</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">X400AuthoritativeDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies a string value for the X.400 authoritative domain. Enter either the GUID or the name of the X.400 authoritative domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">X400AuthoritativeDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>X400AuthoritativeDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the X.400 authoritative domain object for the X.400 authoritative domain Sales.</maml:para>
        <maml:para />
        <maml:para>Remove-X400AuthoritativeDomain -Identity Sales</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "X.400 domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/bb58853a-b51e-4f90-b88f-c5adda88d14d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>bb740ed7-6af4-4053-ad9c-6688ca42b481
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-ClassificationRuleCollection</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-ClassificationRuleCollection cmdlet to view the classification rule collections in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>ClassificationRuleCollection</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-ClassificationRuleCollection</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ClassificationRuleCollectionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the classification rule collection you want to view. You can use any value that uniquely identifies the classification rule collection. For example, you can specify the name, rule collection name or distinguished name (DN) of the classification rule collection.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ClassificationRuleCollectionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ClassificationRuleCollectionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns a summary list of all classification rule collections.</maml:para>
        <maml:para />
        <maml:para>Get-ClassificationRuleCollection</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- Example 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns detailed information about the classification rule collection named Microsoft Rule Pack. The command is piped to the Format-List cmdlet to display the detailed configuration of the specified classification rule collection.</maml:para>
        <maml:para />
        <maml:para>Get-ClassificationRuleCollection "Microsoft Rule Pack" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para />
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/bb740ed7-6af4-4053-ad9c-6688ca42b481(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>be73fade-7071-41f0-aa51-458bc215f90e
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-MessageClassification</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the New-MessageClassification cmdlet to create a message classification instance in your organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>MessageClassification</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-MessageClassification</maml:name>
      <command:parameter required="True">
        <maml:name>DisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>SenderDescription</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ClassificationID</maml:name>
        <command:parameterValue required="True">Guid</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisplayPrecedence</maml:name>
        <command:parameterValue required="True">Highest | Higher | High | MediumHigh | Medium | MediumLow | Low | Lower | Lowest</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PermissionMenuVisible</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RetainClassificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientDescription</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>New-MessageClassification</maml:name>
      <command:parameter required="True">
        <maml:name>Locale</maml:name>
        <command:parameterValue required="True">CultureInfo</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>DisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>SenderDescription</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IgnoreDehydratedFlag</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientDescription</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplayName</maml:name>
      <maml:description>
        <maml:para>The DisplayName parameter specifies the display name for the message classification instance. The display name is used by Outlook users to select the appropriate message classification before they send a message.</maml:para>
        <maml:para>The message classification XML file must be present on the sender's computer for the display name to be displayed.</maml:para>
        <maml:para>If the UserDisplayEnabled parameter is set to $true, the display name is displayed for the recipient, even if no message classification XML file is installed.</maml:para>
        <maml:para>When you specify a name that includes spaces, you must enclose the name in quotation marks ("), for example, "Display Name". The DisplayName parameter can contain a maximum of 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Locale</maml:name>
      <maml:description>
        <maml:para>The Locale parameter specifies a locale-specific version of the message classification. You must also pass the Identity parameter of the default existing message classification when you create a new locale-specific version.</maml:para>
        <maml:para>Valid input for the Locale parameter is the string names listed in the Culture Name column in the Microsoft .NET Class Library class reference available at CultureInfo Class (http://go.microsoft.com/fwlink/p/?linkId=184859).</maml:para>
      </maml:description>
      <command:parameterValue required="True">CultureInfo</command:parameterValue>
      <dev:type>
        <maml:name>CultureInfo</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the administrative name for the message classification instance. The name is used to administer the message classification instance. When you specify a name that includes spaces, you must enclose the name in quotation marks ("), for example, "Adminstrative Name". The Name parameter can contain a maximum of 256 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderDescription</maml:name>
      <maml:description>
        <maml:para>The SenderDescription parameter specifies the purpose of the message classification to the sender. The value of this parameter is used by Outlook users to select the appropriate message classification before they send a message. Enclose the value in quotation marks ("), for example, "This is the sender description that explains when to use this message classification". The SenderDescription parameter can contain a maximum of 1,024 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ClassificationID</maml:name>
      <maml:description>
        <maml:para>The ClassificationID parameter specifies a classification ID of an existing message classification that you want to import and use in your Exchange organization. Use this parameter if you're configuring message classifications that span two Exchange forests in the same enterprise.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Guid</command:parameterValue>
      <dev:type>
        <maml:name>Guid</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplayPrecedence</maml:name>
      <maml:description>
        <maml:para>The DisplayPrecedence parameter specifies the relative precedence of the message classification to other message classifications that may be applied to a specified message. Although Outlook only lets a user specify a single classification per message, transport rules may apply other classifications to a message. The classification with the highest precedence is shown first, and the subsequent classifications, which are those with lesser precedence as defined by this parameter, are appended in the appropriate order thereafter.</maml:para>
        <maml:para>Valid input for the DisplayPrecedence parameter is Highest, Higher, High, MediumHigh, Medium, MediumLow, Low, Lower, and Lowest.</maml:para>
        <maml:para>The default value is Medium.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Highest | Higher | High | MediumHigh | Medium | MediumLow | Low | Lower | Lowest</command:parameterValue>
      <dev:type>
        <maml:name>Highest | Higher | High | MediumHigh | Medium | MediumLow | Low | Lower | Lowest</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IgnoreDehydratedFlag</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PermissionMenuVisible</maml:name>
      <maml:description>
        <maml:para>The PermissionMenuVisible parameter specifies whether the values that you entered for the DisplayName and RecipientDescription parameters are displayed in Outlook as the user composes a message.</maml:para>
        <maml:para>If you set the PermissionMenuVisible parameter to $false, users won't be able to assign this message classification to the messages they are composing. However, messages received with this message classification still display the classification information.</maml:para>
        <maml:para>The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientDescription</maml:name>
      <maml:description>
        <maml:para>The RecipientDescription parameter specifies the purpose of the message classification to the recipient. The value of this parameter is shown to Outlook users when they receive a message that has this message classification. Enclose the value in quotation marks ("), for example, "This is the recipient description that explains how to treat the message that has been classified". The RecipientDescription parameter can contain a maximum of 1,024 characters.</maml:para>
        <maml:para>If you don't enter a value for this parameter, the description that you enter for the SenderDescription parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RetainClassificationEnabled</maml:name>
      <maml:description>
        <maml:para>The RetainClassificationEnabled parameter specifies whether the message classification should persist with the message if the message is forwarded or replied to.</maml:para>
        <maml:para>The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the message classification named MyMessageClassification with the following properties:</maml:para>
        <maml:para />
        <maml:para>The display name is New Message Classification.</maml:para>
        <maml:para>The sender description is "This is the description text".</maml:para>
        <maml:para>New-MessageClassification -Name MyMessageClassification -DisplayName "New Message Classification" -SenderDescription "This is the description text"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a locale-specific (Spanish - Spain) version of an existing message classification MyMessageClassification.</maml:para>
        <maml:para />
        <maml:para>New-MessageClassification MyMessageClassification -Locale es-ES -DisplayName "España Example" -SenderDescription "Este es el texto de la descripción"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>After you create a new message classification, you can specify the message classification as a transport rule predicate. Before Microsoft Outlook and Outlook Web App users can apply the message classification to messages, you must update the end-user systems with the message classification XML file created by the Export-OutlookClassification.ps1 script file. The Export-OutlookClassification.ps1 script file is located in the %ExchangeInstallPath%Scripts directory.</maml:para>
    <maml:para>When you create a message classification, it has no locale. By default, the new message classification is used for all locales. After a default message classification is defined, you can add new locales of the classification by running the New-MessageClassification cmdlet and by specifying the default message classification identity that you want to localize.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Message classifications" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/be73fade-7071-41f0-aa51-458bc215f90e(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>bf0a92ce-9bcf-476e-b92b-8279c141f361
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-ServerComponentState</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-ServerComponentState cmdlet to configure and update Microsoft Exchange Server 2013 components and endpoints on servers you specify.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>ServerComponentState</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-ServerComponentState</maml:name>
      <command:parameter required="True">
        <maml:name>Component</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Requester</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>State</maml:name>
        <command:parameterValue required="True">Inactive | Active | Draining</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LocalOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RemoteOnly</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TimeoutInSeconds</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Component</maml:name>
      <maml:description>
        <maml:para>The Component parameter specifies the component or endpoint for which you want to set the state.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the server you want to configure.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Requester</maml:name>
      <maml:description>
        <maml:para>The Requester parameter specifies the system requesting this state change. The string can be one of the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>HealthAPI</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Maintenance</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Sidelined</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Functional</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Deployment</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>State</maml:name>
      <maml:description>
        <maml:para>The State parameter specifies the state that you want for the component. The state can be one of the following:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Active</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Inactive</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Draining</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Inactive | Active | Draining</command:parameterValue>
      <dev:type>
        <maml:name>Inactive | Active | Draining</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LocalOnly</maml:name>
      <maml:description>
        <maml:para>The LocalOnly parameter specifies that the cmdlet changes should be written to the Windows registry only.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RemoteOnly</maml:name>
      <maml:description>
        <maml:para>The RemoteOnly parameter specifies that the cmdlet changes should be written to Active Directory only.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TimeoutInSeconds</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example sets the Unified Messaging (UM) component state to Active, as requested by maintenance mode.</maml:para>
        <maml:para />
        <maml:para>Set-ServerComponentState -Component UMCallRouter -Identity MailboxServer01 -Requester Maintenance -State Active</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Test system health" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/bf0a92ce-9bcf-476e-b92b-8279c141f361(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>c1a98e97-e58a-49c8-a44d-948b2fc07876
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Import-ExchangeCertificate</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Import-ExchangeCertificate cmdlet to import a certificate or chain of certificates.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Import</command:verb>
    <command:noun>ExchangeCertificate</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Import-ExchangeCertificate</maml:name>
      <command:parameter required="True">
        <maml:name>FileData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FriendlyName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Password</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PrivateKeyExportable</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Import-ExchangeCertificate</maml:name>
      <command:parameter required="True">
        <maml:name>Instance</maml:name>
        <command:parameterValue required="True">String[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FriendlyName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Password</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PrivateKeyExportable</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Import-ExchangeCertificate</maml:name>
      <command:parameter required="True">
        <maml:name>FileName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FriendlyName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Password</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PrivateKeyExportable</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FileData</maml:name>
      <maml:description>
        <maml:para>The FileData parameter specifies the content retrieved from the certificate file using the Get-Content cmdlet. For implementation details, see the section.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FileName</maml:name>
      <maml:description>
        <maml:para>The FileName parameter specifies the name of the file that contains the certificate you want to import.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Instance</maml:name>
      <maml:description>
        <maml:para>The Instance parameter specifies whether to pass a whole object to the command to be processed. This parameter is mainly used in scripts where a whole object must be passed to the command.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String[]</command:parameterValue>
      <dev:type>
        <maml:name>String[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FriendlyName</maml:name>
      <maml:description>
        <maml:para>The FriendlyName parameter specifies a friendly name for the resulting certificate. The friendly name must be less than 64 characters.</maml:para>
        <maml:para>The default friendly name is Microsoft Exchange.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Password</maml:name>
      <maml:description>
        <maml:para>The Password parameter specifies the password for the private key that's imported with this command. Use the Get-Credential cmdlet to store the password variable.</maml:para>
        <maml:para>The Get-Credential cmdlet prompts you for a user name and password, but only the password field is used to import the certificate. You don't have to use a real domain name or user name in the Name field. For implementation details, see the section.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SecureString</command:parameterValue>
      <dev:type>
        <maml:name>SecureString</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PrivateKeyExportable</maml:name>
      <maml:description>
        <maml:para>The PrivateKeyExportable parameter specifies whether the private key of the certificate can be exported.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the server name to which you want to import the certificate.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example imports an existing certificate and private key from the PKCS #12 file ExportedCert.pfx.</maml:para>
        <maml:para />
        <maml:para>Import-ExchangeCertificate -FileData ([Byte[]]$(Get-Content -Path c:\certificates\ExportedCert.pfx -Encoding byte -ReadCount 0)) -Password:(Get-Credential).password</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example imports a chain of certificates from the PKCS #7 file IssuedCert.p7b.</maml:para>
        <maml:para />
        <maml:para>Import-ExchangeCertificate -FileData ([Byte[]]$(Get-Content -Path c:\certificates\IssuedCert.p7b -Encoding byte -ReadCount 0))</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can use the Import-ExchangeCertificate cmdlet for the following purposes:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>To import a certificate or chain of certificates from a PKCS #7 file that has been issued by a certification authority (CA). PKCS #7 is the Cryptographic Message Syntax Standard, a syntax used for digitally signing or encrypting data using public key cryptography, including certificates.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>To import an existing certificate and private key from a PKCS #12 (.pfx or .p12) file to the certificate store on the local computer. PKCS #12 is the Personal Information Exchange Syntax Standard, a file format used to store certificates with corresponding private keys protected with a password. The standard is specified by RSA Laboratories. For more information, see the PKCS #12: Personal Information Exchange Syntax Standard (http://www.rsasecurity.com/rsalabs/node.asp?id=2138) website.</maml:para>
      <maml:para>There are many factors to consider when you configure certificates for Transport Layer Security (TLS) and Secure Sockets Layer (SSL) services. You must understand how these factors may affect your overall configuration.</maml:para>
      <maml:para>In Microsoft Exchange Server 2013, to import data from a file, you must use the Get-Content cmdlet to retrieve file data and use the FileData parameter to specify the retrieved data. This can be done in a two-step process, or in a single step. Examples shown in this cmdlet use the single-step approach.</maml:para>
    </command:listItem></command:list>
    <maml:para>The certificate may be published in Active Directory for the purposes of direct trust by using mutual TLS if the following conditions are true:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>The certificate is marked as an SMTP TLS certificate.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>The Subject Name on the certificate matches the fully qualified domain name (FQDN) of the local computer.</maml:para>
    </command:listItem></command:list>
    <maml:para>The certificate may be published in Active Directory by Edge Subscription if the following conditions are true:</maml:para>
    <command:list>bullet
    <command:listItem>
      <maml:para>You import the certificate to an Edge Transport server.</maml:para>
    </command:listItem>
    <command:listItem>
      <maml:para>The certificate has an FQDN that matches the server FQDN.</maml:para>
    </command:listItem></command:list>
    <maml:para>The Import-ExchangeCertificate cmdlet imports either a certificate that's issued from an outstanding request or a PKCS #12 file.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Certificate management" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/c1a98e97-e58a-49c8-a44d-948b2fc07876(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>c41152b0-b304-4b13-b8ea-a24e2c2c3ea8
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Test-OutlookWebServices</command:name>
    <maml:description>
      <maml:para>Use the Test-OutlookWebServices cmdlet to verify the Autodiscover service settings for Microsoft Outlook on a computer running Microsoft Exchange Server 2013.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Test</command:verb>
    <command:noun>OutlookWebServices</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Test-OutlookWebServices</maml:name>
      <command:parameter required="False">
        <maml:name>ClientAccessServer</maml:name>
        <command:parameterValue required="True">ClientAccessServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TrustAnySSLCertificate</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Test-OutlookWebServices</maml:name>
      <command:parameter required="True">
        <maml:name>MonitoringContext</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TrustAnySSLCertificate</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Test-OutlookWebServices</maml:name>
      <command:parameter required="True">
        <maml:name>AutoDiscoverServer</maml:name>
        <command:parameterValue required="True">ClientAccessServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MailboxCredential</maml:name>
        <command:parameterValue required="True">PSCredential</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TrustAnySSLCertificate</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AutoDiscoverServer</maml:name>
      <maml:description>
        <maml:para>The AutoDiscoverServer parameter specifies the server to use to test Autodiscover connectivity.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ClientAccessServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ClientAccessServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MonitoringContext</maml:name>
      <maml:description>
        <maml:para>The MonitoringContext switch includes the associated monitoring events and performance counters in the results. You don't need to specify a value with this switch. Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager 2007 or System Center 2012 - Operations Manager.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>ClientAccessServer</maml:name>
      <maml:description>
        <maml:para>The ClientAccessServer parameter specifies the Client Access server that the client accesses.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ClientAccessServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ClientAccessServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies any valid email address in the forest. If you specify this parameter, incorrectly formed email addresses and addresses that are outside the forest are rejected. This address is used to test the Outlook provider. This property accepts the domain and user name in the domain\user name format or an Active Directory GUID and resolves them to the SMTP address that's needed to authenticate.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MailboxCredential</maml:name>
      <maml:description>
        <maml:para>The MailboxCredential parameter specifies the mailbox credential to use for the test.</maml:para>
      </maml:description>
      <command:parameterValue required="True">PSCredential</command:parameterValue>
      <dev:type>
        <maml:name>PSCredential</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TrustAnySSLCertificate</maml:name>
      <maml:description>
        <maml:para>The TrustAnySSLCertificate parameter allows you to trust self-signed Secure Sockets Layer (SSL) certificates.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example verifies the service information that's returned to the Outlook client from the Autodiscover service for the user holly@contoso.com. The code example verifies information for the following services:</maml:para>
        <maml:para />
        <maml:para>Availability service</maml:para>
        <maml:para>Outlook Anywhere</maml:para>
        <maml:para>Offline address book</maml:para>
        <maml:para>Unified Messaging</maml:para>
        <maml:para>This example tests for a connection to each service. This example also submits a request to the Availability service for the user holly@contoso.com to determine whether the user's free/busy information is being returned correctly from the Client Access server to the Outlook client.</maml:para>
        <maml:para />
        <maml:para>Test-OutlookWebServices -Identity:holly@contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Test-OutlookWebServices cmdlet uses a specified email address to verify that the Outlook provider is configured correctly.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Test Outlook Web Services" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/c41152b0-b304-4b13-b8ea-a24e2c2c3ea8(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>c9308fe6-3b61-4d99-a5f2-ef47abbc7656
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-MapiVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-MapiVirtualDirectory cmdlet to modify Messaging Application Programming Interface (MAPI) virtual directories on Microsoft Exchange 2013 servers. A MAPI virtual directory is used by supported versions of Microsoft Outlook to connect to mailboxes by using the MAPIHTTP protocol.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>MapiVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-MapiVirtualDirectory</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>IISAuthenticationMethods</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionFlags</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionSPNList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionTokenChecking</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the MAPI virtual directory that you want to configure.</maml:para>
        <maml:para>You can use any value that uniquely identifies the virtual directory. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name or &lt;Server&gt;\Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem></command:list>
        <maml:para>The Name value uses the syntax "&lt;VirtualDirectoryName&gt; (&lt;WebsiteName&gt;)" from the properties of the virtual directory. You can specify the wildcard character (*) instead of the default website by using the syntax &lt;VirtualDirectoryName&gt;*.</maml:para>
      </maml:description>
      <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>VirtualDirectoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IISAuthenticationMethods</maml:name>
      <maml:description>
        <maml:para>The IISAuthenticationMethods parameter specifies the authentication methods that are enabled on the virtual directory in Internet Information Services (IIS). Valid values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Basic</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Negotiate</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NTLM</maml:para>
        </command:listItem></command:list>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionFlags</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionSPNList</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionTokenChecking</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      <dev:type>
        <maml:name>None | Allow | Require</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalUrl</maml:name>
      <maml:description>
        <maml:para>The ExternalURL parameter specifies the URL that's used to connect to the virtual directory from outside the firewall.</maml:para>
        <maml:para>This setting enforces the Secure Sockets Layer (SSL) protocol and uses the default SSL port. Valid input for this parameter uses the syntax https://&lt;Domain Name&gt;/mapi.</maml:para>
        <maml:para>When you use the InternalUrl or ExternalUrl parameters, you need to specify one or more authentication values by using the IISAuthenticationMethods parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalUrl</maml:name>
      <maml:description>
        <maml:para>The InternalURL parameter specifies the URL that's used to connect to the virtual directory from inside the firewall.</maml:para>
        <maml:para>This setting enforces the Secure Sockets Layer (SSL) protocol and uses the default SSL port. Valid input for this parameter uses the syntax https://&lt;Domain Name&gt;/mapi.</maml:para>
        <maml:para>When you use the InternalUrl or ExternalUrl parameters, you need to specify one or more authentication values by using the IISAuthenticationMethods parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example makes the following configuration changes to the MAPI virtual directory on the default web site of the server named ContosoMail:</maml:para>
        <maml:para />
        <maml:para>Internal URL https://contoso/mapi.</maml:para>
        <maml:para>IIS authentication methods NTLM and Negotiate.</maml:para>
        <maml:para>Set-MapiVirtualDirectory -Identity "ContosoMail\mapi (Default Web Site)" -InternalUrl https://contoso.com/mapi -IISAuthenticationMethods NTLM,Negotiate</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Client Access virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/c9308fe6-3b61-4d99-a5f2-ef47abbc7656(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>c9bb1fab-4d0f-43e3-ad4a-36643baa6553
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-AdSite</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-AdSite cmdlet to configure the Exchange settings of Active Directory sites.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>AdSite</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-AdSite</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AdSiteIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>HubSiteEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InboundMailEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MinorPartnerId</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PartnerId</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResponsibleForSites</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the identity of the Active Directory site you want to modify. You can use any value that uniquely identifies the site. For example, you can use the name, GUID or distinguished name (DN) of the Active Directory site.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AdSiteIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AdSiteIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>HubSiteEnabled</maml:name>
      <maml:description>
        <maml:para>The HubSiteEnabled parameter specifies whether this site acts as a hub site. The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InboundMailEnabled</maml:name>
      <maml:description>
        <maml:para>The InboundMailEnabled parameter enables or disables receiving incoming messages for all the Exchange located in the Active Directory site. Typically, this parameter is used after Active Directory site failover or maintenance.</maml:para>
        <maml:para>Valid input for this parameter is $true or $false. The default value is $true. If you set the value to $false, none of the Exchange servers in the Active Directory site will be able to receive incoming messages.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MinorPartnerId</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PartnerId</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResponsibleForSites</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example configures the Active Directory site named Default-First-Site-Name as a hub site.</maml:para>
        <maml:para />
        <maml:para>Set-AdSite Default-First-Site-Name -HubSiteEnabled $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport configuration" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/c9bb1fab-4d0f-43e3-ad4a-36643baa6553(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>ca71bbd3-14db-4196-a265-0938efead108
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-SendConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-SendConnector cmdlet to view the settings for a Send connector.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>SendConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-SendConnector</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">SendConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name, or GUID of the Send connector. If the Identity name contains spaces, enclose the name in quotation marks ("). You can omit the Identity parameter label. You can also include the server name by using the format ServerName\ConnectorName.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SendConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>SendConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays detailed information about the Send connector named Contoso.com Send Connector.</maml:para>
        <maml:para />
        <maml:para>Get-SendConnector "Contoso.com Send Connector" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Send connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/ca71bbd3-14db-4196-a265-0938efead108(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>cb002b53-c307-40a6-aca2-a7f29dc740d8
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-ImapSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>The New-ImapSubscription cmdlet allows a user to create IMAP subscriptions in their own cloud-based mailbox. An administrator can't use this cmdlet to create subscriptions in another user's mailbox.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>ImapSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-ImapSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>EmailAddress</maml:name>
        <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>IncomingPassword</maml:name>
        <command:parameterValue required="True">SecureString</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>IncomingServer</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>IncomingUserName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingAuth</maml:name>
        <command:parameterValue required="True">Basic | Ntlm</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingPort</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncomingSecurity</maml:name>
        <command:parameterValue required="True">None | Ssl | Tls</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EmailAddress</maml:name>
      <maml:description>
        <maml:para>The EmailAddress parameter specifies the email address of the IMAP mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpAddress</command:parameterValue>
      <dev:type>
        <maml:name>SmtpAddress</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingPassword</maml:name>
      <maml:description>
        <maml:para>The IncomingPassword parameter specifies the password used to sign in to the IMAP mailbox. You must specify the value for this parameter in a secure format, for example, (ConvertTo-SecureString -String '&lt;password&gt;' -AsPlainText -Force).</maml:para>
      </maml:description>
      <command:parameterValue required="True">SecureString</command:parameterValue>
      <dev:type>
        <maml:name>SecureString</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingServer</maml:name>
      <maml:description>
        <maml:para>The IncomingServer parameter specifies the fully qualified domain name (FQDN) of the IMAP server, for example, incoming.contoso.com.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingUserName</maml:name>
      <maml:description>
        <maml:para>The IncomingUserName parameter specifies the user name used to sign in to the IMAP mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the name of the IMAP subscription. The name of the subscription doesn't have to be globally unique. The name must be unique compared to other subscriptions that exist in the same mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplayName</maml:name>
      <maml:description>
        <maml:para>The DisplayName parameter specifies the friendly name of the IMAP subscription. If you don't specify a value for the DisplayName parameter, the value of the EmailAddress parameter is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force parameter instructs the command to create the subscription even if those settings can't be verified by the remote IMAP server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingAuth</maml:name>
      <maml:description>
        <maml:para>The IncomingAuth parameter sets the authentication method used by IMAP clients to access the IMAP server. Valid values are Basic or Ntlm. If you don't specify a value for the IncomingAuth parameter, the value Basic is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Basic | Ntlm</command:parameterValue>
      <dev:type>
        <maml:name>Basic | Ntlm</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingPort</maml:name>
      <maml:description>
        <maml:para>The IncomingPort parameter specifies the TCP port number used by IMAP clients to connect to the IMAP server. Typical values are 143 for unencrypted connections and 993 for encrypted connections. By default, the value of the IncomingPort parameter is set to 143 if you don't set the IncomingSecurity parameter to Ssl or Tls. If you set the IncomingSecurity parameter to Ssl or Tls, the value of the IncomingPort parameter is set to 993. You can override the default values by specifying an integer for the IncomingPort parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncomingSecurity</maml:name>
      <maml:description>
        <maml:para>The IncomingSecurity parameter specifies the encryption method used by IMAP clients to connect to the IMAP server. Valid values are None, Ssl, or Tls. If you don't specify a value for the IncomingSecurity parameter, the value None is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Ssl | Tls</command:parameterValue>
      <dev:type>
        <maml:name>None | Ssl | Tls</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that will contain the IMAP subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the IMAP subscription Contoso IMAP in the mailbox of the user Kim Akers. The remote IMAP mailbox has the following details:</maml:para>
        <maml:para />
        <maml:para>Email address: kakers@contoso.com</maml:para>
        <maml:para>User name: kakers</maml:para>
        <maml:para>Password: Pa$$word1</maml:para>
        <maml:para>IMAP server: imap.contoso.com</maml:para>
        <maml:para>Authentication method: SSL</maml:para>
        <maml:para>TCP port: 993</maml:para>
        <maml:para>New-ImapSubscription -Name "Contoso IMAP" -EmailAddress kakers@contoso.com -IncomingUserName kakers -IncomingPassword (ConvertTo-SecureString -String 'Pa$$word1' -AsPlainText -Force) -IncomingServer imap.contoso.com -IncomingSecurity Ssl -IncomingPort 993</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The New-ImapSubscription cmdlet creates a connection between a user's cloud-based mailbox and a remote IMAP mailbox. The cloud-based mailbox periodically polls the IMAP mailbox for new messages.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/cb002b53-c307-40a6-aca2-a7f29dc740d8(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>cb46009b-ee6c-4c84-8534-4fb74c32d2eb
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-OutlookProvider</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-OutlookProvider cmdlet to obtain the global settings from the AutoDiscoverConfig object under the Global Settings object in Active Directory.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>OutlookProvider</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-OutlookProvider</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">OutlookProviderIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the ADIDParameter value of the MAPI protocol for which you want to obtain global settings.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OutlookProviderIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OutlookProviderIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example obtains the protocol settings for the web protocol named WEB and pipes the output to display each setting on a separate line.</maml:para>
        <maml:para />
        <maml:para>Get-OutlookProvider -Identity WEB | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-OutlookProvider cmdlet gets the global settings from the AutoDiscoverConfig object in Active Directory and returns an OutlookProvider object to be managed in the Exchange Administration Center.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Autodiscover service configuration settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/cb46009b-ee6c-4c84-8534-4fb74c32d2eb(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>cf131dc1-6067-4952-a6c3-7d6651a326da
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-SendConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-SendConnector cmdlet to delete a Send connector.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>SendConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-SendConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">SendConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name, or GUID of the Send connector. If the Identity name contains spaces, enclose the name in quotation marks ("). You can omit the Identity parameter label. You can also include the server name by using the format ServerName\ConnectorName.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SendConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>SendConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example deletes the Send connector named Contoso.com Send Connector.</maml:para>
        <maml:para />
        <maml:para>Remove-SendConnector "Contoso.com Send Connector"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Remove-SendConnector cmdlet deletes the object and the configuration settings for the Send connector.</maml:para>
    <maml:para>Although a Send connector is configured locally in the Transport service on a Mailbox server or on an Edge server, deleting a Send connector may affect mail flow throughout the organization.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Send connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/cf131dc1-6067-4952-a6c3-7d6651a326da(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>d0058d0e-7f9c-4dba-b358-fb9adf21c1e3
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-ClassificationRuleCollection</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-ClassificationRuleCollection cmdlet to update existing classification rule collections in your organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>ClassificationRuleCollection</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-ClassificationRuleCollection</maml:name>
      <command:parameter required="True">
        <maml:name>FileData</maml:name>
        <command:parameterValue required="True">Byte[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OutOfBoxCollection</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="True" position="1">
      <maml:name>FileData</maml:name>
      <maml:description>
        <maml:para>The FileData parameter specifies the classification rule collection file you want to import.</maml:para>
        <maml:para>For more information about the syntax required to use this parameter, see Syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Byte[]</command:parameterValue>
      <dev:type>
        <maml:name>Byte[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a unique name for the classification rule collection. If the value contains spaces, enclose the value in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OutOfBoxCollection</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example imports the classification rule collection file C:\My Documents\External Classification Rule Collection.xml.</maml:para>
        <maml:para />
        <maml:para>Set-ClassificationRuleCollection -FileData ([Byte[]]$(Get-Content -Path "C:\My Documents\External Classification Rule Collection.xml" -Encoding Byte -ReadCount 0))</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Data loss prevention (DLP)" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/d0058d0e-7f9c-4dba-b358-fb9adf21c1e3(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>d055d1e1-7f5d-4233-bd68-d449937fb674
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-HybridMailflowDatacenterIPs</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-HybridMailflowDatacenterIPs cmdlet to retrieve the IP addresses of the Microsoft Exchange Online Protection (EOP) service data centers.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>HybridMailflowDatacenterIPs</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-HybridMailflowDatacenterIPs</maml:name>
    </command:syntaxItem>
  </command:syntax>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns IP address information for EOP service data centers that support hybrid deployments.</maml:para>
        <maml:para />
        <maml:para>Get-HybridMailflowDatacenterIPs</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-HybridMailflowDatacenterIPs cmdlet supports hybrid deployments and lists the IP addresses of EOP service data centers that support hybrid deployments. The list isn't specific to any on-premises Exchange organization.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Hybrid deployment configuration" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/d055d1e1-7f5d-4233-bd68-d449937fb674(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>d22cdada-08ed-487e-8e91-1a984a0c2409
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-DeliveryAgentConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-DeliveryAgentConnector cmdlet to configure a specific delivery agent connector in your organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>DeliveryAgentConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-DeliveryAgentConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">DeliveryAgentConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AddressSpaces</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeliveryProtocol</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IsScopedConnector</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxConcurrentConnections</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessagesPerConnection</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SourceTransportServers</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the GUID or name of the delivery agent connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">DeliveryAgentConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>DeliveryAgentConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AddressSpaces</maml:name>
      <maml:description>
        <maml:para>The AddessSpaces parameter specifies the domain names for which this delivery agent connector is responsible. The syntax for entering an address space is as follows: &lt;AddressSpaceType&gt;:&lt;AddressSpace&gt;;&lt;AddressSpaceCost&gt;. You must enclose each address space in quotation marks (").</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comment</maml:name>
      <maml:description>
        <maml:para>The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeliveryProtocol</maml:name>
      <maml:description>
        <maml:para>The DeliveryProtocol parameter specifies the communication protocol that determines which delivery agents are responsible for servicing the connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether the delivery agent connector is enabled.</maml:para>
        <maml:para>The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress warning or confirmation messages. This switch can be used when the task is run programmatically and prompting for administrative input is inappropriate. If the Force switch isn't provided in the command, you're prompted for administrative input. You don't have to specify a value with this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IsScopedConnector</maml:name>
      <maml:description>
        <maml:para>The IsScopedConnector parameter specifies the availability of the connector to other Mailbox servers. If the value of this parameter is $false, the connector can be used by all Mailbox servers in your organization. If the value of this parameter is $true, the connector can only be used by Mailbox servers in the same Active Directory site.</maml:para>
        <maml:para>The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxConcurrentConnections</maml:name>
      <maml:description>
        <maml:para>The MaxConcurrentConnections parameter specifies the maximum number of concurrent connections this connector accepts from a specific IP address.</maml:para>
        <maml:para>The default value is 5.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxMessageSize</maml:name>
      <maml:description>
        <maml:para>The MaxMessageSize parameter specifies the maximum size of a message that's allowed to pass through this connector. When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes. The valid input range for this parameter is from 65536 through 2147483647 bytes.</maml:para>
        <maml:para>The default value is unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxMessagesPerConnection</maml:name>
      <maml:description>
        <maml:para>The MaxMessagesPerConnection parameter specifies the maximum number of messages this connector accepts per connection. The connector terminates the connection after this limit is reached and the sending server has to initiate a new connection to send more messages.</maml:para>
        <maml:para>The default value is 20.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the name of this delivery agent connector. The value for the Name parameter can't exceed 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SourceTransportServers</maml:name>
      <maml:description>
        <maml:para>The SourceTransportServers parameter specifies the list of Mailbox servers that host this connector. You can specify more than one server by separating their names with commas.</maml:para>
        <maml:para>By default, only the local server on which the command is executed is added to this parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example configures restrictions on the delivery agent connector Contoso X.400 Connector. It makes the following configuration changes:</maml:para>
        <maml:para />
        <maml:para>Sets the maximum message size allowed through the connector to 10 MB.</maml:para>
        <maml:para>Sets the maximum number of messages allowed per connection to 100.</maml:para>
        <maml:para>Sets the maximum concurrent connections to 10.</maml:para>
        <maml:para>Set-DeliveryAgentConnector "Contoso X.400 Connector" -MaxMessageSize 10MB -MaxMessagesPerConnection 100 -MaxConcurrentConnections 10</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example uses the temporary variable $ConnectorConfig to add the address space c=US;p=Fabrikam;a=Contoso;o=Sales to the delivery agent connector Contoso X.400 Connector and also adds the server Hub04 to the list of servers that host the connector.</maml:para>
        <maml:para />
        <maml:para>$ConnectorConfig = Get-DeliveryAgentConnector "Contoso X.400 Connector"</maml:para>
        <maml:para>$ConnectorConfig.AddressSpaces += "X400:c=US;p=Fabrikam;a=Contoso;o=Sales;1"</maml:para>
        <maml:para>$ConnectorConfig.SourceTransportServers += Hub04</maml:para>
        <maml:para>Set-DeliveryAgentConnector "Contoso X.400 Connector" -AddressSpaces $ConnectorConfig.AddressSpaces -SourceTransportServers $ConnectorConfig.SourceTransportServers</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Delivery agent connectors are used to route messages addressed to foreign systems that don't use the SMTP protocol. When a message is routed to a delivery agent connector, the associated delivery agent performs the content conversion and message delivery. Delivery agent connectors allow queue management of foreign connectors, thereby eliminating the need for storing messages on the file system in Drop and Pickup directories. For more information, see Delivery agents and Delivery Agent connectors.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Delivery agent connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/d22cdada-08ed-487e-8e91-1a984a0c2409(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>d7436ccb-4efd-465f-981a-f487e158cbf3
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-UMCallRouterSettings</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-UMCallRouterSettings cmdlet to set specific properties on a Client Access server running the Microsoft Exchange Unified Messaging Call Router service. This cmdlet can be used to set individual parameters for a specified Client Access server.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>UMCallRouterSettings</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-UMCallRouterSettings</maml:name>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DialPlans</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalHostFqdn</maml:name>
        <command:parameterValue required="True">UMSmartHost</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalServiceFqdn</maml:name>
        <command:parameterValue required="True">UMSmartHost</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IPAddressFamily</maml:name>
        <command:parameterValue required="True">IPv4Only | IPv6Only | Any</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IPAddressFamilyConfigurable</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxCallsAllowed</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SipTcpListeningPort</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SipTlsListeningPort</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UMForwardingAddressTemplate</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UMPodRedirectTemplate</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UMStartupMode</maml:name>
        <command:parameterValue required="True">TCP | TLS | Dual</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DialPlans</maml:name>
      <maml:description>
        <maml:para>The DialPlans parameter specifies the dial plan used by the Microsoft Exchange Unified Messaging Call Router service on a Client Access server. The Client Access server only needs to be associated with a UM dial plan if Microsoft Office Communications Server 2007 R2, Lync Server 2010, or Lync Server 15 is used in your organization. To remove a Client Access server from a dial plan, use $null. The default is no dial plans assigned.</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalHostFqdn</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">UMSmartHost</command:parameterValue>
      <dev:type>
        <maml:name>UMSmartHost</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalServiceFqdn</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">UMSmartHost</command:parameterValue>
      <dev:type>
        <maml:name>UMSmartHost</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IPAddressFamily</maml:name>
      <maml:description>
        <maml:para>The IPAddressFamily parameter specifies whether the UM IP gateway will use Internet Protocol version 4 (IPv4), IPv6, or both to communicate. If set to IPv4Only, the UM IP gateway only uses IPv4 to communicate. If set to IPv6Only, the UM IP gateway only uses IPv6. If set to Any, IPv6 is used first, and then if necessary, it falls back to IPv4. The default is IPv4Only.</maml:para>
      </maml:description>
      <command:parameterValue required="True">IPv4Only | IPv6Only | Any</command:parameterValue>
      <dev:type>
        <maml:name>IPv4Only | IPv6Only | Any</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IPAddressFamilyConfigurable</maml:name>
      <maml:description>
        <maml:para>The IPAddressFamilyConfigurable parameter specifies whether you're able to set the IPAddressFamily parameter to IPv6Only or Any. The default is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxCallsAllowed</maml:name>
      <maml:description>
        <maml:para>The MaxCallsAllowed parameter will be removed in future versions of the product.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the name of the Client Access server that runs the Microsoft Exchange Unified Messaging Call Router service that will be changed. This parameter specifies the directory object ID for the Client Access server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SipTcpListeningPort</maml:name>
      <maml:description>
        <maml:para>The SipTcpListeningPort parameter specifies the TCP port used by the Client Access server running the Microsoft Exchange Unified Messaging Call Router service to receive incoming calls. This TCP port is used by a Client Access server when a UM dial plan isn't configured to use SIP Secured or Secured mode. The default is port 5060.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SipTlsListeningPort</maml:name>
      <maml:description>
        <maml:para>The SipTlsListeningPort parameter specifies the Transport Layer Security (TLS) port used by a Client Access server running the Microsoft Exchange Unified Messaging Call Router service to receive incoming calls. This TLS port is used by a Client Access server when a UM dial plan is configured to use SIP Secured or Secured mode. The default is port 5061.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UMForwardingAddressTemplate</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UMPodRedirectTemplate</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UMStartupMode</maml:name>
      <maml:description>
        <maml:para>The UMStartupMode parameter specifies whether the Client Access server running the Microsoft Exchange Unified Messaging Call Router service starts up in TCP, TLS, or Dual mode. If the Client Access server isn't associated with any UM dial plans or is being added to UM dial plans that have different security settings, you should choose Dual mode. In Dual mode, the Client Access server can listen on ports 5060 and 5061 at the same time. If the startup mode is changed, the Microsoft Exchange Unified Messaging Call Router service must be restarted.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TCP | TLS | Dual</command:parameterValue>
      <dev:type>
        <maml:name>TCP | TLS | Dual</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the following configuration on the Client Access server MyUMCallRouter:</maml:para>
        <maml:para />
        <maml:para>Adds the Client Access server to the UM SIP dial plan MySIPDialPlan.</maml:para>
        <maml:para>Enables the Microsoft Exchange Unified Messaging Call Router service on the Client Access server to accept both IPv4 and IPv6 data packets.</maml:para>
        <maml:para>Sets the maximum number of incoming voice, fax, auto attendant, and Outlook Voice Access calls to 150.</maml:para>
        <maml:para>Enables the Microsoft Exchange Unified Messaging Call Router service to start up using TLS mode.</maml:para>
        <maml:para>Set-UMCallRouterSettings -DialPlans MySIPDialPlan -IPAddressFamily Any -Server MyUMCallRouter.northwindtraders.com -UMStartupMode TLS</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the Client Access server UMCallRouter001 from all UM SIP dial plans.</maml:para>
        <maml:para />
        <maml:para>Set-UMCallRouterSettings -DialPlans $null -Server UMCallRouter001.contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Set-UMCallRouterSettings cmdlet sets specific properties on a Client Access server running the Microsoft Exchange Unified Messaging Call Router service. This cmdlet can be used to set individual Unified Messaging parameters for a specified Client Access server.</maml:para>
    <maml:para>After this task is completed, the cmdlet sets the parameters and the values specified.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Client Access Server (UM call router service)" entry in the Unified Messaging permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/d7436ccb-4efd-465f-981a-f487e158cbf3(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>d79009fc-4dea-44f9-89e0-732106ac67a0
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Dump-ProvisioningCache</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Dump-ProvisioningCache cmdlet to return a list of the cached keys and values for the specified server and Windows PowerShell application.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Dump</command:verb>
    <command:noun>ProvisioningCache</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Dump-ProvisioningCache</maml:name>
      <command:parameter required="True">
        <maml:name>Application</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CurrentOrganization</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organizations</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CacheKeys</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Dump-ProvisioningCache</maml:name>
      <command:parameter required="True">
        <maml:name>Application</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>GlobalCache</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>CacheKeys</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Application</maml:name>
      <maml:description>
        <maml:para>The Application parameter specifies the specific administrative application to reset the provisioning cache for. You can use the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Powershell</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Powershell-LiveId</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Powershell-Proxy</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PowershellLiveId-Proxy</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Ecp</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Psws</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GlobalCache</maml:name>
      <maml:description>
        <maml:para>The GlobalCache switch specifies that all cache keys are cleared.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the fully qualified domain name (FQDN) of the server that the application you want to reset is running on.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CacheKeys</maml:name>
      <maml:description>
        <maml:para>The CacheKeys parameter specifies the value for the cache key that you want to clear. The format for the values should contain 32 digits separated by four dashes: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</maml:para>
        <maml:para>Use the Dump-ProvisioningCache cmdlet to return a list of cache keys.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>CurrentOrganization</maml:name>
      <maml:description>
        <maml:para>The CurrentOrganization switch specifies that the provision cache is reset for this organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organizations</maml:name>
      <maml:description>
        <maml:para>The Organizations parameter specifies the organizations that the provisioning cache will be reset. This parameter is used in multi-tenant deployments.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays all cache keys for the specified server and Windows PowerShell application.</maml:para>
        <maml:para />
        <maml:para>Dump-ProvisioningCache -Server EXSRV1.contoso.com -Application Powershell-Proxy -GlobalCache</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Dump-ProvisioningCache cmdlet is for diagnostic purposes only and is rarely used. Exchange administrators or Microsoft support personnel may need to run this cmdlet to troubleshoot problems resulting from incorrect links or properties stamped on newly provisioned recipients, which can be caused by stale data in the provisioning cache.</maml:para>
    <maml:para>The Dump-ProvisioningCache cmdlet displays a list of the Windows PowerShell provisioning cache keys. Use the value of these cache keys with the Reset-ProvisioningCache cmdlet to reset provisioning cache data.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Exchange server configuration settings" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/d79009fc-4dea-44f9-89e0-732106ac67a0(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>da7214fe-c641-4c6a-a479-df95a4136929
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-ServerComponentState</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-ServerComponentState cmdlet to retrieve configuration settings for Microsoft Exchange Server 2013 components and endpoints.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>ServerComponentState</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-ServerComponentState</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Component</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the requester.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Component</maml:name>
      <maml:description>
        <maml:para>The Component parameter specifies the component or endpoint for which you want to retrieve the state.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves the component state for the Unified Messaging component.</maml:para>
        <maml:para />
        <maml:para>Get-ServerComponentState -Component UnifiedMessaging</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Test system health" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/da7214fe-c641-4c6a-a479-df95a4136929(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>dbaf487e-c303-4e16-b0ad-12e1321b00a5
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Disable-ServiceEmailChannel</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Disable-ServiceEmailChannel cmdlet to disable the .NET service channel for a specific user. The .NET service channel enables Microsoft Exchange to store information that it later forwards to applications or devices that aren't permanently connected to the server running Exchange.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Disable</command:verb>
    <command:noun>ServiceEmailChannel</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Disable-ServiceEmailChannel</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the identity of the user for which you want to enable the .NET service channel. The user specified must be a valid user in Active Directory who has an Exchange mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example disables the .NET service channel for the user Jeff Hay.</maml:para>
        <maml:para />
        <maml:para>Disable-ServiceEmailChannel -Identity JeffHay</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example disables the .NET service channel for the user Jeff Hay after confirmation is given.</maml:para>
        <maml:para />
        <maml:para>Disable-ServiceEmailChannel -Identity JeffHay -Confirm $true</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example disables the .NET service channel for the user Jeff Hay without requiring confirmation.</maml:para>
        <maml:para />
        <maml:para>Disable-ServiceEmailChannel -Identity JeffHay -Confirm $false</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Disable-ServiceEmailChannel cmdlet deletes the receive folder in the user's mailbox under the root folder.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Client Access service email channel settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/dbaf487e-c303-4e16-b0ad-12e1321b00a5(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>dbd22f09-4a97-4738-903d-f2760c15c101
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-UMCallRouterSettings</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-UMCallRouterSettings cmdlet to retrieve the properties for a Client Access server that runs the Microsoft Exchange Unified Messaging Call Router service and returns a list of available Client Access servers from Active Directory.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>UMCallRouterSettings</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-UMCallRouterSettings</maml:name>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the name of the Client Access server that runs the Microsoft Exchange Unified Messaging Call Router service that's viewed. This parameter specifies the directory object ID for the UM call router.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays a list of all the Client Access servers running the Microsoft Exchange Unified Messaging Call Router service in the Active Directory forest.</maml:para>
        <maml:para />
        <maml:para>Get-UMCallRouterSettings</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example displays a formatted list of properties for the Client Access server MyUMCallRouter running the Microsoft Exchange Unified Messaging Call Router service.</maml:para>
        <maml:para />
        <maml:para>Get-UMCallRouterSettings -Server MyUMCallRouter | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Get-UMCallRouterSettings cmdlet retrieves the properties for a Client Access server that runs the Microsoft Exchange Unified Messaging Call Router service and returns a list of available Client Access servers from Active Directory. When the cmdlet is used for a single Client Access server, it returns the UM call router properties including MaxCalls, MaxFaxCalls, and UMDialPlans. The properties and their values for the Client Access server are stored in the Unified Messaging section of the Exchange Server configuration object in Active Directory.</maml:para>
    <maml:para>After this task is completed, the cmdlet returns the parameters and the values specified.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Client Access Server (UM call router service)" entry in the Unified Messaging permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/dbd22f09-4a97-4738-903d-f2760c15c101(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>dc05b43c-ddc3-468b-97ff-5e915f56c751
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-EdgeSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-EdgeSubscription cmdlet to retrieve information about Edge Subscriptions in your organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>EdgeSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-EdgeSubscription</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">TransportServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the Edge Transport server for which you want to retrieve Edge Subscription information. The identity is expressed as the host name of the Edge Transport server. If no identity is specified, all Edge Subscriptions are returned.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TransportServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>TransportServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves detailed Edge Subscription information for all Edge Transport servers subscribed to your Exchange organization.</maml:para>
        <maml:para />
        <maml:para>Get-EdgeSubscription | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example retrieves the Edge Subscription information for the Edge Transport server name Edge1 from the domain controller named DC1.</maml:para>
        <maml:para />
        <maml:para>Get-EdgeSubscription Edge1 -DomainController DC1.contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Run the Get-EdgeSubscription cmdlet on an Exchange server in your organization. This cmdlet retrieves the list of Edge Subscriptions. Each Edge Transport server that's subscribed to the Exchange organization has a separate Edge Subscription. You can use this cmdlet to view the Edge Subscription information for a specific Edge Transport server. You can also use this cmdlet to view the Edge Subscription information for all Edge Transport servers subscribed to Active Directory sites.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "EdgeSync" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/dc05b43c-ddc3-468b-97ff-5e915f56c751(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>dce6cec3-9fb5-4c5e-b80c-9f9c40de3177
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-EdgeSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-EdgeSubscription cmdlet to remove Edge Subscription from the Exchange organization and from the subscribed Edge Transport server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>EdgeSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-EdgeSubscription</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">TransportServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the identity of the Edge Transport server for which you want to remove Edge Subscription. The identity is expressed as the host name of the Edge Transport server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">TransportServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>TransportServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress warning or confirmation messages. This switch can be used when the task is run programmatically and prompting for administrative input is inappropriate. If the Force switch isn't provided in the command, you're prompted for administrative input. You don't have to specify a value with this parameter.</maml:para>
        <maml:para>If you don't specify the Force switch, the command will inform you that the removal of the replicated recipient data from AD LDS can take a long time and will give you the option to cancel the operation.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes Edge Subscription for the Edge Transport server.Edge1.</maml:para>
        <maml:para />
        <maml:para>Remove-EdgeSubscription -Identity Edge1</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Remove-EdgeSubscription cmdlet removes Edge Subscription. After you remove Edge Subscription, synchronization of information from Active Directory to the Active Directory Lightweight Directory Services (AD LDS) instance stops. All the accounts stored in AD LDS are removed, and the Edge Transport server is removed from the source server list of any Send connector.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "EdgeSync" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/dce6cec3-9fb5-4c5e-b80c-9f9c40de3177(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>e0c2366a-eda9-4152-bd3e-3a2d1953562d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-AcceptedDomain</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Get-AcceptedDomain cmdlet to view the configuration information for the accepted domains in your organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>AcceptedDomain</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-AcceptedDomain</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AccountPartition</maml:name>
        <command:parameterValue required="True">AccountPartitionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Filter</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UsnForReconciliationSearch</maml:name>
        <command:parameterValue required="True">Int64</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AccountPartition</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AccountPartitionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AccountPartitionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Filter</maml:name>
      <maml:description>
        <maml:para>The Filter parameter specifies a set of attributes used to filter the list of accepted domains.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies a string value for the accepted domain. Enter either the GUID or the name of the accepted domain.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AcceptedDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UsnForReconciliationSearch</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int64</command:parameterValue>
      <dev:type>
        <maml:name>Int64</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all the accepted domains in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-AcceptedDomain</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example lists all the authoritative accepted domains in your organization.</maml:para>
        <maml:para />
        <maml:para>Get-AcceptedDomain | Where{$_.DomainType -eq 'Authoritative'}</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Accepted domains" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/e0c2366a-eda9-4152-bd3e-3a2d1953562d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>e0d69dab-1e9b-4e2b-b615-5d12cb24f792
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-ForeignConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-ForeignConnector cmdlet to delete a Foreign connector in the Transport service of a Mailbox server.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>ForeignConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-ForeignConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ForeignConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the GUID or connector name of a specific Foreign connector. You can also include the server name by using the format ServerName\ConnectorName.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ForeignConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ForeignConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example deletes the Foreign connector named Fax Connector.</maml:para>
        <maml:para />
        <maml:para>Remove-ForeignConnector "Fax Connector"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The Remove-ForeignConnector cmdlet deletes the object and the configuration information for a Foreign connector.</maml:para>
    <maml:para>Although a Foreign connector is configured on a local Mailbox server, if you delete a Foreign connector, you may affect mail flow throughout the organization.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Foreign connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/e0d69dab-1e9b-4e2b-b615-5d12cb24f792(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>e13a9ab2-8cca-4b98-b304-837d13fd4a60
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-ImapSubscription</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in the cloud-based service.</maml:para>
      <maml:para>Use the Get-ImapSubscription cmdlet to view information about IMAP subscriptions configured in cloud-based mailboxes.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>ImapSubscription</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-ImapSubscription</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>IncludeReport</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Mailbox</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AggregationType</maml:name>
        <command:parameterValue required="True">Aggregation | Mirrored | Migration | PeopleConnection | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ResultSize</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AggregationType</maml:name>
      <maml:description>
        <maml:para>The AggregationType parameter filters the results by type. The acceptable values for this parameter are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>All</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Aggregation</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Migration</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Mirrored</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>PeopleConnection</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Aggregation | Mirrored | Migration | PeopleConnection | All</command:parameterValue>
      <dev:type>
        <maml:name>Aggregation | Mirrored | Migration | PeopleConnection | All</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the IMAP subscription. You can identify the subscription by using one of the following methods:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Specify the globally unique identifier of the subscription, which is its canonical name (CN).</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Use the Mailbox parameter to specify the mailbox that contains the subscription, and then specify the name of the subscription.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can find the identifying values for an IMAP subscription, such as Identity and Name, by running this command: Get-ImapSubscription -Mailbox &lt;mailbox&gt;.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AggregationSubscriptionIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AggregationSubscriptionIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>IncludeReport</maml:name>
      <maml:description>
        <maml:para>The IncludeReport switch specifies whether to return additional details, which can be used for troubleshooting.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Mailbox</maml:name>
      <maml:description>
        <maml:para>The Mailbox parameter specifies the cloud-based mailbox that contains the IMAP subscription. You can use any value that uniquely identifies the mailbox.</maml:para>
        <maml:para>For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Alias</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Display name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>LegacyExchangeDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Email address</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ResultSize</maml:name>
      <maml:description>
        <maml:para>The ResultSize parameter specifies the total number of subscriptions to return. If no value is specified, the parameter returns all results that match the filter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows detailed information for all the IMAP subscriptions configured in the mailbox of the user Kim Akers.</maml:para>
        <maml:para />
        <maml:para>Get-ImapSubscription -Mailbox "Kim Akers" | Format-List</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns additional information about the IMAP subscriptions configured in the mailbox of the user Kim Akers.</maml:para>
        <maml:para />
        <maml:para>Get-ImapSubscription -Mailbox "Kim Akers" -IncludeReport | Export-CSV C:\KimAkersImapReport</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can view the properties of the IMAP subscription, such as the IMAP server, authentication method, connection status, and the last time a successful synchronization occurred.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Subscriptions" entry in the Feature permissions in Exchange Online topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/e13a9ab2-8cca-4b98-b304-837d13fd4a60(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>e1cdca04-2d84-49dd-8a64-e19b8ab52ca3
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Enable-ServiceEmailChannel</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Enable-ServiceEmailChannel cmdlet to enable the .NET service channel for a specific user.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Enable</command:verb>
    <command:noun>ServiceEmailChannel</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Enable-ServiceEmailChannel</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the identity of the user for which you want to enable the .NET service channel. The user specified must be a valid user in Active Directory who has an Exchange mailbox.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MailboxIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MailboxIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables the .NET service channel for the user Tony Smith.</maml:para>
        <maml:para />
        <maml:para>Enable-ServiceEmailChannel -Identity "fourthcoffee\tony"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables the .NET service channel for the user Tony Smith.</maml:para>
        <maml:para />
        <maml:para>Enable-ServiceEmailChannel -Identity "tony@contoso.com"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example enables the .NET service channel for the user Tony Smith.</maml:para>
        <maml:para />
        <maml:para>Enable-ServiceEmailChannel -Identity "TonySmith"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>The .NET service channel enables Microsoft Exchange to store information that it later forwards to applications or devices that aren't permanently connected to the server running Exchange. This cmdlet creates a receive folder in the user's mailbox under the root folder named Service E-mail.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Client Access service email channel settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/e1cdca04-2d84-49dd-8a64-e19b8ab52ca3(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>e368589a-6510-4209-9f10-171d1990cd7d
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Get-ExchangeCertificate</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Get-ExchangeCertificate cmdlet to view certificates in the local certificate store.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Get</command:verb>
    <command:noun>ExchangeCertificate</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Get-ExchangeCertificate</maml:name>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Thumbprint</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainName</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-ExchangeCertificate</maml:name>
      <command:parameter required="False">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ExchangeCertificateIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainName</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>Get-ExchangeCertificate</maml:name>
      <command:parameter required="False">
        <maml:name>Instance</maml:name>
        <command:parameterValue required="True">X509Certificate2</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainName</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainName</maml:name>
      <maml:description>
        <maml:para>The DomainName parameter specifies whether to return all certificates that contain the specified domain name in the Subject Name or the Subject Alternative Name fields.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the certificate ID.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ExchangeCertificateIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ExchangeCertificateIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Instance</maml:name>
      <maml:description>
        <maml:para>The Instance parameter is no longer used and will be deprecated.</maml:para>
      </maml:description>
      <command:parameterValue required="True">X509Certificate2</command:parameterValue>
      <dev:type>
        <maml:name>X509Certificate2</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server from which you want to get the certificate. You can use any value that uniquely identifies the Exchange server.</maml:para>
        <maml:para>If you run Get-ExchangeCertificate on a Client Access server, and you don't use the Server parameter to specify the local server, the command returns the results from a Mailbox server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Thumbprint</maml:name>
      <maml:description>
        <maml:para>The Thumbprint parameter specifies a certificate thumbprint. Each certificate contains a thumbprint, which is the digest of the certificate data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns all certificates stored on the Client Access server named ClientAccess01.</maml:para>
        <maml:para />
        <maml:para>Get-ExchangeCertificate -Server ClientAccess01</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example returns the properties of a specified certificate in a formatted list.</maml:para>
        <maml:para />
        <maml:para>The Thumbprint parameter is a positional parameter so you can provide only the thumbprint value without the Thumbprint parameter name.</maml:para>
        <maml:para>Get-ExchangeCertificate 0271A7F1CA9AD8A27152CCAE044F968F068B14B8 | Format-List *</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example shows which certificate Exchange will select for the domain name mail.contoso.com. A Send or Receive connector selects the certificate to use based on the fully qualified domain name (FQDN) of the connector. If you have multiple certificates with the same FQDN, you can see which certificate Exchange will select by using the DomainName parameter to specify the FQDN. The first certificate returned is the certificate Exchange will select.</maml:para>
        <maml:para />
        <maml:para>Get-ExchangeCertificate -DomainName mail.contoso.com</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Certificate management" entry in the Exchange and Shell infrastructure permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/e368589a-6510-4209-9f10-171d1990cd7d(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>eb527447-ed68-4a55-943b-aad8c8a94d01
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-ReceiveConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-ReceiveConnector cmdlet to create a new Receive connector.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>ReceiveConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-ReceiveConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Bindings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>RemoteIPRanges</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Custom</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdvertiseClientSettings</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AuthMechanism</maml:name>
        <command:parameterValue required="True">None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Banner</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BinaryMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ChunkingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionInactivityTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultDomain</maml:name>
        <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeliveryStatusNotificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainSecureEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EightBitMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableAuthGSSAPI</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnhancedStatusCodesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionPolicy</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Fqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveCredentialEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LongAddressesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxAcknowledgementDelay</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHeaderSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnection</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPercentagePerSource</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPerSource</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLocalHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLogonFailures</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxProtocolErrors</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxRecipientsPerMessage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateLimit</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateSource</maml:name>
        <command:parameterValue required="True">None | IPAddress | User | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrarEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PermissionGroups</maml:name>
        <command:parameterValue required="True">None | AnonymousUsers | ExchangeUsers | ExchangeServers | ExchangeLegacyServers | Partners | Custom</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipeliningEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProxyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireEHLODomain</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireTLS</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServiceDiscoveryFqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SizeEnabled</maml:name>
        <command:parameterValue required="True">Disabled | Enabled | EnabledWithoutValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SuppressXAnonymousTls</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TarpitInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsCertificateName</maml:name>
        <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsDomainCapabilities</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRole</maml:name>
        <command:parameterValue required="True">None | Cafe | Mailbox | ClientAccess | UnifiedMessaging | HubTransport | Edge | All | Monitoring | CentralAdmin | CentralAdminDatabase | DomainController | WindowsDeploymentServer | ProvisionedServer | LanguagePacks | FrontendTransport | CafeArray | FfoWebService | OSP | ARR | ManagementFrontEnd | ManagementBackEnd | SCOM | CentralAdminFrontEnd | NAT | DHCP</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>New-ReceiveConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Bindings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Internet</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdvertiseClientSettings</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AuthMechanism</maml:name>
        <command:parameterValue required="True">None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Banner</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BinaryMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ChunkingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionInactivityTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultDomain</maml:name>
        <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeliveryStatusNotificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainSecureEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EightBitMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableAuthGSSAPI</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnhancedStatusCodesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionPolicy</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Fqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveCredentialEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LongAddressesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxAcknowledgementDelay</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHeaderSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnection</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPercentagePerSource</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPerSource</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLocalHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLogonFailures</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxProtocolErrors</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxRecipientsPerMessage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateLimit</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateSource</maml:name>
        <command:parameterValue required="True">None | IPAddress | User | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrarEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PermissionGroups</maml:name>
        <command:parameterValue required="True">None | AnonymousUsers | ExchangeUsers | ExchangeServers | ExchangeLegacyServers | Partners | Custom</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipeliningEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProxyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RemoteIPRanges</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireEHLODomain</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireTLS</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServiceDiscoveryFqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SizeEnabled</maml:name>
        <command:parameterValue required="True">Disabled | Enabled | EnabledWithoutValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SuppressXAnonymousTls</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TarpitInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsCertificateName</maml:name>
        <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsDomainCapabilities</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRole</maml:name>
        <command:parameterValue required="True">None | Cafe | Mailbox | ClientAccess | UnifiedMessaging | HubTransport | Edge | All | Monitoring | CentralAdmin | CentralAdminDatabase | DomainController | WindowsDeploymentServer | ProvisionedServer | LanguagePacks | FrontendTransport | CafeArray | FfoWebService | OSP | ARR | ManagementFrontEnd | ManagementBackEnd | SCOM | CentralAdminFrontEnd | NAT | DHCP</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>New-ReceiveConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Internal</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>RemoteIPRanges</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdvertiseClientSettings</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AuthMechanism</maml:name>
        <command:parameterValue required="True">None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Banner</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BinaryMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Bindings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ChunkingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionInactivityTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultDomain</maml:name>
        <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeliveryStatusNotificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainSecureEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EightBitMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableAuthGSSAPI</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnhancedStatusCodesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionPolicy</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Fqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveCredentialEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LongAddressesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxAcknowledgementDelay</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHeaderSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnection</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPercentagePerSource</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPerSource</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLocalHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLogonFailures</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxProtocolErrors</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxRecipientsPerMessage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateLimit</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateSource</maml:name>
        <command:parameterValue required="True">None | IPAddress | User | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrarEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PermissionGroups</maml:name>
        <command:parameterValue required="True">None | AnonymousUsers | ExchangeUsers | ExchangeServers | ExchangeLegacyServers | Partners | Custom</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipeliningEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProxyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireEHLODomain</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireTLS</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServiceDiscoveryFqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SizeEnabled</maml:name>
        <command:parameterValue required="True">Disabled | Enabled | EnabledWithoutValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SuppressXAnonymousTls</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TarpitInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsCertificateName</maml:name>
        <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsDomainCapabilities</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRole</maml:name>
        <command:parameterValue required="True">None | Cafe | Mailbox | ClientAccess | UnifiedMessaging | HubTransport | Edge | All | Monitoring | CentralAdmin | CentralAdminDatabase | DomainController | WindowsDeploymentServer | ProvisionedServer | LanguagePacks | FrontendTransport | CafeArray | FfoWebService | OSP | ARR | ManagementFrontEnd | ManagementBackEnd | SCOM | CentralAdminFrontEnd | NAT | DHCP</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>New-ReceiveConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Client</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>RemoteIPRanges</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdvertiseClientSettings</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AuthMechanism</maml:name>
        <command:parameterValue required="True">None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Banner</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BinaryMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Bindings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ChunkingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionInactivityTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultDomain</maml:name>
        <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeliveryStatusNotificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainSecureEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EightBitMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableAuthGSSAPI</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnhancedStatusCodesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionPolicy</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Fqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveCredentialEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LongAddressesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxAcknowledgementDelay</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHeaderSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnection</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPercentagePerSource</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPerSource</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLocalHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLogonFailures</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxProtocolErrors</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxRecipientsPerMessage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateLimit</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateSource</maml:name>
        <command:parameterValue required="True">None | IPAddress | User | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrarEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PermissionGroups</maml:name>
        <command:parameterValue required="True">None | AnonymousUsers | ExchangeUsers | ExchangeServers | ExchangeLegacyServers | Partners | Custom</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipeliningEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProxyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireEHLODomain</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireTLS</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServiceDiscoveryFqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SizeEnabled</maml:name>
        <command:parameterValue required="True">Disabled | Enabled | EnabledWithoutValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SuppressXAnonymousTls</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TarpitInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsCertificateName</maml:name>
        <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsDomainCapabilities</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRole</maml:name>
        <command:parameterValue required="True">None | Cafe | Mailbox | ClientAccess | UnifiedMessaging | HubTransport | Edge | All | Monitoring | CentralAdmin | CentralAdminDatabase | DomainController | WindowsDeploymentServer | ProvisionedServer | LanguagePacks | FrontendTransport | CafeArray | FfoWebService | OSP | ARR | ManagementFrontEnd | ManagementBackEnd | SCOM | CentralAdminFrontEnd | NAT | DHCP</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>New-ReceiveConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Bindings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Partner</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>RemoteIPRanges</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdvertiseClientSettings</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AuthMechanism</maml:name>
        <command:parameterValue required="True">None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Banner</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BinaryMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ChunkingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionInactivityTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultDomain</maml:name>
        <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeliveryStatusNotificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainSecureEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EightBitMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableAuthGSSAPI</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnhancedStatusCodesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionPolicy</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Fqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveCredentialEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LongAddressesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxAcknowledgementDelay</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHeaderSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnection</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPercentagePerSource</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPerSource</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLocalHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLogonFailures</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxProtocolErrors</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxRecipientsPerMessage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateLimit</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateSource</maml:name>
        <command:parameterValue required="True">None | IPAddress | User | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrarEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PermissionGroups</maml:name>
        <command:parameterValue required="True">None | AnonymousUsers | ExchangeUsers | ExchangeServers | ExchangeLegacyServers | Partners | Custom</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipeliningEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProxyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireEHLODomain</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireTLS</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServiceDiscoveryFqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SizeEnabled</maml:name>
        <command:parameterValue required="True">Disabled | Enabled | EnabledWithoutValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SuppressXAnonymousTls</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TarpitInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsCertificateName</maml:name>
        <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsDomainCapabilities</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRole</maml:name>
        <command:parameterValue required="True">None | Cafe | Mailbox | ClientAccess | UnifiedMessaging | HubTransport | Edge | All | Monitoring | CentralAdmin | CentralAdminDatabase | DomainController | WindowsDeploymentServer | ProvisionedServer | LanguagePacks | FrontendTransport | CafeArray | FfoWebService | OSP | ARR | ManagementFrontEnd | ManagementBackEnd | SCOM | CentralAdminFrontEnd | NAT | DHCP</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
    <command:syntaxItem>
      <maml:name>New-ReceiveConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Usage</maml:name>
        <command:parameterValue required="True">Custom | Internet | Internal | Client | Partner</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Bindings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RemoteIPRanges</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdvertiseClientSettings</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AuthMechanism</maml:name>
        <command:parameterValue required="True">None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Banner</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BinaryMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ChunkingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionInactivityTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultDomain</maml:name>
        <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeliveryStatusNotificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainSecureEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EightBitMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableAuthGSSAPI</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnhancedStatusCodesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionPolicy</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Fqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveCredentialEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LongAddressesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxAcknowledgementDelay</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHeaderSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnection</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPercentagePerSource</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPerSource</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLocalHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLogonFailures</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxProtocolErrors</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxRecipientsPerMessage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateLimit</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateSource</maml:name>
        <command:parameterValue required="True">None | IPAddress | User | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrarEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PermissionGroups</maml:name>
        <command:parameterValue required="True">None | AnonymousUsers | ExchangeUsers | ExchangeServers | ExchangeLegacyServers | Partners | Custom</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipeliningEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProxyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireEHLODomain</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireTLS</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServiceDiscoveryFqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SizeEnabled</maml:name>
        <command:parameterValue required="True">Disabled | Enabled | EnabledWithoutValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SuppressXAnonymousTls</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TarpitInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsCertificateName</maml:name>
        <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsDomainCapabilities</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRole</maml:name>
        <command:parameterValue required="True">None | Cafe | Mailbox | ClientAccess | UnifiedMessaging | HubTransport | Edge | All | Monitoring | CentralAdmin | CentralAdminDatabase | DomainController | WindowsDeploymentServer | ProvisionedServer | LanguagePacks | FrontendTransport | CafeArray | FfoWebService | OSP | ARR | ManagementFrontEnd | ManagementBackEnd | SCOM | CentralAdminFrontEnd | NAT | DHCP</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Bindings</maml:name>
      <maml:description>
        <maml:para>The Bindings parameter specifies the local IP address and TCP port number used by the Receive connector to listen for inbound messages. Valid syntax for this parameter is &lt;IP Address&gt;:&lt;TCP Port&gt;, such as 192.168.1.1:25. The IP address 0.0.0.0 indicates that the Receive connector uses all IP addresses configured on all network adapters to listen for inbound messages.</maml:para>
        <maml:para>You must specify a local IP address that's valid for the Mailbox server or Edge server on which the Receive connector is located. If you specify an invalid local IP address, the Microsoft Exchange Transport service may fail to start when the service is restarted.</maml:para>
        <maml:para>You must specify a value for the Bindings parameter when the following parameters are specified:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Internet or Usage parameter with a value of Internet</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner or Usage parameter with a value of Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Custom or Usage parameter with a value of Custom</maml:para>
        </command:listItem></command:list>
        <maml:para>The values that you specify using the Bindings parameter must satisfy one of the following requirements for uniqueness:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>You can specify a unique combination of IP address and TCP port that doesn't conflict with the IP address or TCP port used in the Bindings parameter of another Receive connector on the server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>You can use an existing combination of IP address and TCP port, but use the RemoteIPRanges parameter to restrict the remote servers serviced by the Receive connector. However, when you use this command to create a Receive connector, you can only use the RemoteIPRanges parameter and the Bindings parameter together when the following parameters are specified: Custom or Usage parameter with a value of Custom. Partner or Usage parameter with a value of Partner.</maml:para>
        </command:listItem></command:list>
        <maml:para>You can't specify a value for the Bindings parameter with this command when the following parameters are specified:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Client or Usage parameter with a value of Client. The default value of the Bindings parameter is 0.0.0.0:587. This value indicates that the connector accepts connections on TCP port 587 on all IP addresses configured on all network adapters in the server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internal or Usage parameter with a value of Internal. The default value of the Bindings parameter is 0.0.0.0:25. This value indicates that the connector accepts connections on TCP port 25 on all IP addresses configured on all network adapters in the server.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Client</maml:name>
      <maml:description>
        <maml:para>The Client parameter specifies the Client usage type. The usage type specifies the default permission groups and authentication methods assigned to the Receive connector. If you use the Client parameter, you can't use any of the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internet</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Custom</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Usage</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify the Client parameter, you must specify a value for the RemoteIPRanges parameter. If you don't specify a value for a required parameter, this command prompts you so that it may continue.</maml:para>
        <maml:para>For more information about Receive connector usage types, permission groups, and authentication methods, see Receive connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Internal</maml:name>
      <maml:description>
        <maml:para>The Internal parameter specifies the Internal usage type. The usage type specifies the default permission groups and authentication methods assigned to the Receive connector. If you use the Internal parameter, you can't use any of the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Client</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internet</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Custom</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Usage</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify the Internal parameter, you must specify a value for the RemoteIPRanges parameter. If you don't specify a value for a required parameter, the command prompts you so that it may continue.</maml:para>
        <maml:para>For more information about Receive connector usage types, permission groups, and authentication methods, see Receive connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Internet</maml:name>
      <maml:description>
        <maml:para>The Internet parameter specifies the Internet usage type. The usage type specifies the default permission groups and authentication methods assigned to the Receive connector. If you use the Internet parameter, you can't use any of the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Client</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Custom</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Usage</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify the Internet parameter, you must specify a value for the Bindings parameter. If you don't provide a value for a required parameter, this command prompts you so that it may continue.</maml:para>
        <maml:para>For more information about Receive connector usage types, permission groups, and authentication methods, see Receive connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the administrator-supplied name of the connector. Enter the Name parameter as a string, for example: "New Receive Connector".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Partner</maml:name>
      <maml:description>
        <maml:para>The Partner parameter specifies the Partner usage type. The usage type specifies the default permission groups and authentication methods assigned to the Receive connector. If you use the Partner parameter, you can't use any of the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Client</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internet</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Custom</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Usage</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify the Partner parameter, you must specify a value for the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Bindings</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RemoteIPRanges</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't provide a value for a required parameter, this command prompts you so that it may continue.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RemoteIPRanges</maml:name>
      <maml:description>
        <maml:para>The RemoteIPRanges parameter specifies the remote IP addresses from which this connector accepts messages. Valid syntax for this parameter is &lt;Starting IP Address&gt;-&lt;Ending IP Address&gt;, such as 192.168.1.1-192.168.1.10. You can specify multiple IP address ranges separated by commas.</maml:para>
        <maml:para>You must specify a value for the RemoteIPRanges parameter when the following parameters are specified:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Client or Usage parameter with a value of Client</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internal or Usage parameter with a value of Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner or Usage parameter with a value of Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Custom or Usage parameter with a value of Custom</maml:para>
        </command:listItem></command:list>
        <maml:para>Multiple Receive connectors on the same server can have overlapping remote IP address ranges as long as one IP address range is completely overlapped by another IP address. When remote IP address ranges overlap, the remote IP address range with the most specific match to the IP address of the connecting server is used.</maml:para>
        <maml:para>The default value of the RemoteIPRanges parameter for the Internet usage type is 0.0.0.0-255.255.255.255. This value indicates that the connector accepts connections from all remote IP addresses.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Usage</maml:name>
      <maml:description>
        <maml:para>The Usage parameter specifies the default permission groups and authentication methods assigned to the Receive connector. The valid values for the Usage parameter are as follows: Client, Custom, Internal, Internet, and Partner.</maml:para>
        <maml:para>If you specify a value for the Usage parameter, you can't use any of the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Client</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internet</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Custom</maml:para>
        </command:listItem></command:list>
        <maml:para>A value for the Bindings parameter is required if you specify any of the following values for the Usage parameter:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Internet</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Custom</maml:para>
        </command:listItem></command:list>
        <maml:para>A value for the RemoteIPRanges parameter is required if you specify any of the following values for the Usage parameter:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Client</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Custom</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't specify a value for a required parameter, the command ends unsuccessfully. This command won't prompt you for the missing required parameters.</maml:para>
        <maml:para>For more information about Receive connector usage types, permission groups, and authentication methods, see Receive connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Custom | Internet | Internal | Client | Partner</command:parameterValue>
      <dev:type>
        <maml:name>Custom | Internet | Internal | Client | Partner</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdvertiseClientSettings</maml:name>
      <maml:description>
        <maml:para>The AdvertiseClientSettings parameter specifies whether the SMTP server name, port number, and authentication settings are displayed in the Outlook Web App, accessed from Settings &gt; Options &gt; Account &gt; my Account &gt; Settings for POP or IMAP access.</maml:para>
        <maml:para>The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AuthMechanism</maml:name>
      <maml:description>
        <maml:para>The AuthMechanism parameter specifies the advertised and accepted authentication mechanisms. The authentication options are None, Tls, Integrated, BasicAuth, BasicAuthRequireTLS, ExchangeServer, and ExternalAuthoritative. You can enter multiple values for the AuthMechanism parameter by separating the values with commas. If the RequireTLS parameter is set to $true, the AuthMechanism parameter must be set to Tls. If you set the AuthMechanism parameter to BasicAuthRequireTLS, you must also select BasicAuth and Tls. The AuthMechanism parameter value ExternalAuthoritative may only coexist with the value Tls. If you set the AuthMechanism parameter to ExternalAuthoritative, the PermissionGroups parameter must also have the value ExchangeServers.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      <dev:type>
        <maml:name>None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Banner</maml:name>
      <maml:description>
        <maml:para>The Banner parameter specifies an SMTP 220 banner and overrides the default SMTP 220 banner. When the value of the Banner parameter is blank, the default SMTP banner is the following:</maml:para>
        <maml:para>220 &lt;Servername&gt; Microsoft ESMTP MAIL service ready at &lt;RegionalDay-Date-24HourTimeFormat&gt; &lt;RegionalTimeZoneOffset&gt;</maml:para>
        <maml:para>When you specify a value for the Banner parameter, you must use the following syntax:</maml:para>
        <maml:para>220 &lt;RemainingBannerText&gt;.</maml:para>
        <maml:para>220 is the default Service ready SMTP response code as defined in RFC 2821.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BinaryMimeEnabled</maml:name>
      <maml:description>
        <maml:para>The BinaryMimeEnabled parameter specifies whether the BINARYMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the BinaryMimeEnabled parameter is set to $true, the BINARYMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the BinaryMimeEnabled parameter is set to $false, the BINARYMIME EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ChunkingEnabled</maml:name>
      <maml:description>
        <maml:para>The ChunkingEnabled parameter specifies whether the CHUNKING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid input for this parameter is $true or $false. The default value is $true. When the ChunkingEnabled parameter is set to $true, the CHUNKING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the ChunkingEnabled parameter is set to $false, the CHUNKING EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comment</maml:name>
      <maml:description>
        <maml:para>The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectionInactivityTimeout</maml:name>
      <maml:description>
        <maml:para>The ConnectionInactivityTimeout parameter specifies the maximum amount of idle time before a connection to a Receive connector is closed. The default value for a Receive connector configured on a Mailbox server is 5 minutes. The default value for a Receive connector configured on an Edge server is 1 minute.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>The value specified by the ConnectionTimeout parameter must be greater than the value specified by the ConnectionInactivityTimeout parameter. The valid input range for either parameter is 00:00:01 to 1.00:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectionTimeout</maml:name>
      <maml:description>
        <maml:para>The ConnectionTimeout parameter specifies the maximum time that a connection can remain open, even if the connection is actively transmitting data. The default value for a Receive connector configured on a Mailbox server is 10 minutes. The default value for a Receive connector configured on an Edge server is 5 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify a connection time-out of 5 minutes, enter 00.00:05:00.</maml:para>
        <maml:para>The value specified by the ConnectionTimeout parameter must be greater than the value specified by the ConnectionInactivityTimeout parameter. The valid input range for either parameter is from 00:00:01 through 1.00:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Custom</maml:name>
      <maml:description>
        <maml:para>The Custom parameter specifies the Custom usage type. The usage type specifies the default permission groups and authentication methods assigned to the Receive connector. If you use the Custom parameter, you can't use any of the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Client</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internal</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Internet</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Partner</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Usage</maml:para>
        </command:listItem></command:list>
        <maml:para>If you specify the Custom parameter, you must specify a value for the following parameters:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Bindings</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>RemoteIPRanges</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't provide a value for a required parameter, this command prompts you so that it may continue.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DefaultDomain</maml:name>
      <maml:description>
        <maml:para>The DefaultDomain parameter specifies the domain name to append to values that are submitted to MAIL FROM or RCPT TO in the message envelope by a sending server if no domain name is provided.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AcceptedDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeliveryStatusNotificationEnabled</maml:name>
      <maml:description>
        <maml:para>The DeliveryStatusNotificationEnabled parameter specifies whether the delivery status notification (DSN) EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the DeliveryStatusNotificationEnabled parameter is set to $true, the DSN EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the DeliveryStatusNotificationEnabled parameter is set to $false, the DSN EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled. The DSN extension to extended SMTP (ESMTP) provides enhanced DSN functionality specified in RFC 1891.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainSecureEnabled</maml:name>
      <maml:description>
        <maml:para>The DomainSecureEnabled parameter enables mutual Transport Layer Security (TLS) authentication for the domains serviced by this Receive connector. Mutual TLS authentication functions correctly only if the following conditions are true:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>The value of the DomainSecureEnabled parameter is $true.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The AuthMechanism parameter contains the value Tls and doesn't contain the value ExternalAuthoritative.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The value of the AuthMechanism parameter contains Tls.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The TLSReceiveDomainSecureList parameter in the Get-TransportConfig command contains at least one domain serviced by this Receive connector. The wildcard character (*) isn't supported in domains that are configured for mutual TLS authentication. The same domain must also be defined on the corresponding Send connector, and in the value of the TLSSendDomainSecureList parameter in the Get-TransportConfig command.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value for the DomainSecureEnabled parameter is $false for the following types of Receive connectors:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>All Receive connectors defined in the Transport service on a Mailbox server</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User-created Receive connectors defined on an Edge server</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value for the DomainSecureEnabled parameter is $true for default Receive connectors defined on an Edge server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EightBitMimeEnabled</maml:name>
      <maml:description>
        <maml:para>The EightBitMimeEnabled parameter specifies whether the 8BITMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the EightBitMimeEnabled parameter is set to $true, the 8BITMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the EightBitMimeEnabled parameter is set to $false, the 8BITMIME EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableAuthGSSAPI</maml:name>
      <maml:description>
        <maml:para>The EnableAuthGSSAPI parameter specifies the advertisement of the Generic Security Services application programming interface (GSSAPI) authentication method, when Integrated Windows authentication is enabled on this connector. If the AuthMechanism parameter contains Integrated, and the EnableAuthGSSAPI parameter is set to $true, the AUTH GSSAPI NTLM keyword is advertised in the EHLO response of the Receive connector. Clients may use Kerberos or NTLM to authenticate with the Receive connector. If the AuthMechanism parameter contains Integrated, and the EnableAuthGSSAPI parameter is set to $false, the AUTH NTLM keyword is advertised in the EHLO response of the Receive connector. Clients may use only NTLM to authenticate with the Receive connector.</maml:para>
        <maml:para>If you have Internet Information Services (IIS) messaging servers that authenticate with this Receive connector, you should set the value of the EnableAuthGSSAPI parameter to $false. Authentication with computers running Microsoft Exchange Server 2003 aren't affected by the value of the EnableAuthGSSAPI parameter. Exchange 2003 servers use the authentication methods advertised in the X-EXPS keyword. The X-EXPS keyword is advertised in the EHLO response of the Receive connector when the AuthMechanism parameter contains ExchangeServer.</maml:para>
        <maml:para>The valid values for this parameter is $true or $false. The default value is $false. By default, the EnableAuthGSSAPI parameter is set to $true only on the default Receive connector Client &lt;Server Name&gt; created only in the Transport service on a Mailbox server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether to enable the connector. Valid values for this parameter are $true or $false. The default value is $true. Use the Enabled parameter to enable or disable the connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnhancedStatusCodesEnabled</maml:name>
      <maml:description>
        <maml:para>The EnhancedStatusCodesEnabled parameter specifies whether the ENHANCEDSTATUSCODES EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the EnhancedStatusCodesEnabled parameter is set to $true, the ENHANCEDSTATUSCODES EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the EnhancedStatusCodesEnabled parameter is set to $false, the ENHANCEDSTATUSCODES EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled. The ENHANCEDSTATUSCODES extension provides enhanced error and status information in delivery status notification messages sent to remote servers.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionPolicy</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionPolicy parameter specifies how Extended Protection for Authentication is implemented on this Receive connector. By default, this parameter is set to None. The ExtendedProtectionPolicy parameter may have the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Extended Protection for Authentication isn't used.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Allow Extended Protection for Authentication is used only if the connecting host supports it. Otherwise, connections are established without Extended Protection for Authentication.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Require Extended Protection for Authentication is required for all incoming connections to this Receive connector. If the connecting host doesn't support Extended Protection for Authentication, the connection is rejected.</maml:para>
        </command:listItem></command:list>
        <maml:para>Extended Protection for Authentication enhances the protection and handling of credentials when authenticating network connections using Integrated Windows authentication. Integrated Windows authentication is also known as NTLM. We strongly recommend that you use Extended Protection for Authentication if you are using Integrated Windows authentication.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      <dev:type>
        <maml:name>None | Allow | Require</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Fqdn</maml:name>
      <maml:description>
        <maml:para>The Fqdn parameter specifies the FQDN used as the destination server for connected messaging servers that use the Receive connector to send incoming messages. The value of this parameter is displayed to connected messaging servers whenever a destination server name is required, as in the following examples:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>In the default SMTP banner of the Receive connector</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>In the EHLO/HELO response of the Receive connector</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>In the most recent Received header field in the incoming message when the message enters the Transport service of a Mailbox server or an Edge server</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>During TLS authentication</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value of the Fqdn parameter is the FQDN of the Mailbox server or Edge server that contains the Receive connector.</maml:para>
        <maml:para>Don't modify the FQDN value on the default Receive connector Default &lt;Server Name&gt; that's automatically created in the Transport service of a Mailbox server. If you have multiple Mailbox servers in your Exchange organization and you change the FQDN value on the Default &lt;Server Name&gt; Receive connector, internal mail flow between Mailbox servers will fail.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LiveCredentialEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LongAddressesEnabled</maml:name>
      <maml:description>
        <maml:para>The LongAddressesEnabled parameter specifies whether the Receive connector accepts long X.400 email addresses. The X.400 email addresses are encapsulated in SMTP email addresses by using the Internet Mail Connector Encapsulated Address (IMCEA) encapsulation method.</maml:para>
        <maml:para>When the value of this parameter is $false, the maximum length for a complete SMTP email address is 571 characters.</maml:para>
        <maml:para>When the value of this parameter is $true, the following changes are made:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>The XLONGADDR keyword is advertised in the EHLO response of the Receive connector.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The accepted line length of an SMTP session is increased to 8,000 characters.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Valid long addresses are accepted by the MAIL FROM and RCPT TO SMTP commands.</maml:para>
        </command:listItem></command:list>
        <maml:para>Therefore, X.400 email addresses can be up to 1,860 characters long after IMCEA encapsulation.</maml:para>
        <maml:para>The valid values for this parameter are $true or $false. The default value is $false. You can modify this parameter only on Receive connectors configured in the Transport service on a Mailbox server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxAcknowledgementDelay</maml:name>
      <maml:description>
        <maml:para>This parameter isn't used by Microsoft Exchange Server 2013. It's only used by Microsoft Exchange 2010 servers in a coexistence environment.</maml:para>
        <maml:para>The MaxAcknowledgementDelay parameter specifies the maximum period the transport server delays acknowledgement until it verifies that the message has been successfully delivered to all recipients. When receiving messages from a host that doesn't support shadow redundancy, an Exchange Server 2010 transport server will delay issuing an acknowledgement until it verifies that the message has been successfully delivered to all recipients. However, if it takes too long to verify successful delivery, the transport server will time out and issue an acknowledgement anyway.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>The default value is 30 seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxHeaderSize</maml:name>
      <maml:description>
        <maml:para>The MaxHeaderSize parameter specifies in bytes the maximum size of the SMTP message header that the Receive connector accepts before it closes the connection. The default value is 65536 bytes.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 1 through 2147483647 bytes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxHopCount</maml:name>
      <maml:description>
        <maml:para>The MaxHopCount parameter specifies the maximum number of hops that a message can take before the message is rejected by the Receive connector. The maximum number of hops is determined by the number of Received header fields that exist in a submitted message. The default value is 30. The valid input range for this parameter is from 1 through 500.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxInboundConnection</maml:name>
      <maml:description>
        <maml:para>The MaxInboundConnection parameter specifies the maximum number of inbound connections that this Receive connector serves at the same time. The default value is 5000. The valid input range for this parameter is from 1 through 2147483647. To disable the inbound connection limit on a Receive connector, enter a value of unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxInboundConnectionPercentagePerSource</maml:name>
      <maml:description>
        <maml:para>The MaxInboundConnectionPercentagePerSource parameter specifies the maximum number of connections that a Receive connector serves at the same time from a single IP address, expressed as the percentage of available remaining connections on a Receive connector. Enter the value as an integer without the percent sign (%). The default value is 2 percent. The valid input range for this parameter is 1 to 100.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxInboundConnectionPerSource</maml:name>
      <maml:description>
        <maml:para>The MaxInboundConnectionPerSource parameter specifies the maximum number of connections that this Receive connector serves at the same time from a single IP address. The default value is 100. The valid input range for this parameter is from 1 through 10000. To disable the inbound connection per source limit on a Receive connector, enter a value of unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxLocalHopCount</maml:name>
      <maml:description>
        <maml:para>The MaxLocalHopCount parameter specifies the maximum number of local hops that a message can take before the message is rejected by the Receive connector. The maximum number of local hops is determined by the number of Received headers with local server addresses in a submitted message. The default value is 8. The valid input range for this parameter is 0 to 50. When you specify a value of 0, the message is never rejected based on the number of local hops.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxLogonFailures</maml:name>
      <maml:description>
        <maml:para>The MaxLogonFailures parameter specifies the number of logon failures that the Receive connector retries before it closes the connection. The default value is 3. The valid input range for this parameter is from 0 through 10. When you specify a value of 0, the connection is never closed because of logon failures.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxMessageSize</maml:name>
      <maml:description>
        <maml:para>The MaxMessageSize parameter specifies the maximum size of a message. The default value is 25 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 65536 through 2147483647 bytes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxProtocolErrors</maml:name>
      <maml:description>
        <maml:para>The MaxProtocolErrors parameter specifies the maximum number of SMTP protocol errors that the Receive connector accepts before closing the connection. The default value is 5. The valid input range for this parameter is from 0 through 2147483647. When you specify a value of unlimited, a connection is never closed because of protocol errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxRecipientsPerMessage</maml:name>
      <maml:description>
        <maml:para>The MaxRecipientsPerMessage parameter specifies the maximum number of recipients per message that the Receive connector accepts before closing the connection. The default value is 200. The valid input range for this parameter is 1 to 512000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageRateLimit</maml:name>
      <maml:description>
        <maml:para>The MessageRateLimit parameter specifies the maximum number of messages that can be sent by a single client IP address per minute. The default value for a Receive connector configured on a Mailbox server is unlimited. The default value for a Receive connector configured on an Edge server is 600 messages per minute. The valid input range for this parameter is 1 to 2147483647. To remove the message rate limit on a Receive connector, enter a value of unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageRateSource</maml:name>
      <maml:description>
        <maml:para>The MessageRateSource parameter specifies how the message submission rate is calculated. It can have one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None: The message submission rate isn't calculated.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User: The message submission rate is calculated for sending users (specified with the MAIL FROM SMTP command).</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>IPAddress: The message submission rate is calculated for sending hosts.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>All: The message submission rate is calculated for both sending users and sending hosts.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">None | IPAddress | User | All</command:parameterValue>
      <dev:type>
        <maml:name>None | IPAddress | User | All</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OrarEnabled</maml:name>
      <maml:description>
        <maml:para>The OrarEnabled parameter enables the Originator Requested Alternate Recipient (ORAR). When the value of this parameter is $false, ORAR isn't supported. When the value of this parameter is $true, ORAR is supported by advertising the XORAR keyword in the EHLO response of the Receive connector. The actual ORAR information is transmitted in the RCPT TO SMTP command.</maml:para>
        <maml:para>The valid values for this parameter are $true or $false. The default value is $false. If the email address specified in the ORAR information is a long X.400 email address, the LongAddressesEnabled parameter must be $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PermissionGroups</maml:name>
      <maml:description>
        <maml:para>The PermissionGroups parameter specifies the groups or roles that can submit messages to the Receive connector and the permissions assigned to those groups. A permission group is a predefined set of permissions granted to well-known security principals. The valid values for this parameter are as follows: None, AnonymousUsers, ExchangeUsers, ExchangeServers, ExchangeLegacyServersPartners, and Custom. The default permission groups assigned to a Receive connector depend on the connector usage type that was specified by the Usage parameter when the Receive connector was created. For more information about Receive connector usage types, see Receive connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | AnonymousUsers | ExchangeUsers | ExchangeServers | ExchangeLegacyServers | Partners | Custom</command:parameterValue>
      <dev:type>
        <maml:name>None | AnonymousUsers | ExchangeUsers | ExchangeServers | ExchangeLegacyServers | Partners | Custom</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PipeliningEnabled</maml:name>
      <maml:description>
        <maml:para>The PipeliningEnabled parameter specifies whether the PIPELINING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. When the PipeliningEnabled parameter is set to $true, the PIPELINING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the PipeliningEnabled parameter is set to $false, the PIPELINING EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled. The PIPELINING extension enables the remote server to send requests without waiting for a response from this Receive connector. The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProtocolLoggingLevel</maml:name>
      <maml:description>
        <maml:para>The ProtocolLoggingLevel parameter specifies whether to enable or disable protocol logging for a Receive connector. A value of Verbose enables protocol logging for the connector. A value of None disables protocol logging for the connector. The default value is None. The location of the Receive connector protocol logs for all Receive connectors configured on a Mailbox server or an Edge server is specified by using the ReceiveProtocolLogPath parameter of the Set-TransportService cmdlet.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>None | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProxyEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequireEHLODomain</maml:name>
      <maml:description>
        <maml:para>The RequireEHLODomain parameter specifies whether the remote computer must provide a domain name in the EHLO handshake after the SMTP connection is established. Valid values for this parameter are $true or $false. The default value is $false. When the RequireEHLODomain parameter is set to $true, the remote computer must provide a domain name in the EHLO handshake after the SMTP connection is established. If the remote computer doesn't provide the domain name, the SMTP connection is closed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequireTLS</maml:name>
      <maml:description>
        <maml:para>The RequireTLS parameter specifies that all messages received by this connector require TLS transmission. Valid values for thisparameter are $true or $false. The default value is $false. When the RequireTLS parameter is set to $true, all messages received by this connector require TLS transmission.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the server on which the new Receive connector is created.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ServiceDiscoveryFqdn</maml:name>
      <maml:description>
        <maml:para>The service discovery fully-qualified domain name (FQDN).</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SizeEnabled</maml:name>
      <maml:description>
        <maml:para>The SizeEnabled parameter specifies whether the SIZE SMTP extension is enabled. Valid values for this parameter are Enabled, Disabled, or EnabledwithoutValue. The default value is Enabled. When the SizeEnabled parameter is set to Enabled, the SIZE SMTP extension is enabled, and the maximum allowed message size value from the MaxMessageSize parameter is advertised in the EHLO banner. When the SizeEnabled parameter is set to Disabled, the SIZE SMTP extension isn't used, and the maximum allowed message size value is never disclosed to the remote server. When the SizeEnabled parameter is set to EnabledWithoutValue, the SIZE SMTP extension is enabled. However, the maximum allowed message size value from the MaxMessageSize parameter isn't advertised in the EHLO banner. This allows the message to bypass message size checks for authenticated connections between Mailbox servers. The SIZE SMTP extension is defined in RFC 1870. The SIZE SMTP extension enables the source server to declare the size of the inbound message to the target server. It also allows the target server to declare the maximum message size that it's allowed to accept to the sending server. If the advertised size of the inbound message exceeds the value in the MaxMessageSize parameter, the Receive connector responds to the remote server by using an error code and closes the connection.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Disabled | Enabled | EnabledWithoutValue</command:parameterValue>
      <dev:type>
        <maml:name>Disabled | Enabled | EnabledWithoutValue</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SuppressXAnonymousTls</maml:name>
      <maml:description>
        <maml:para>The SuppressXAnonymousTls parameter specifies whether this Receive connector supports the standard TLS encryption for incoming connections. By default, all communications between servers is protected with TLS. However, if you need to disable TLS on a specific connection in your organization, you can create a specific Receive connector and set the SuppressXAnonymousTls parameter to $true. The default value is $false.</maml:para>
        <maml:para>Before you can set this parameter to $true, you must use the Set-TransportService cmdlet to set the UseDownGradedExchangeServerAuth parameter to $true on the server this Receive connector is configured.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TarpitInterval</maml:name>
      <maml:description>
        <maml:para>The TarpitInterval parameter specifies the amount of time to delay an SMTP response to a remote server that may be abusing the connection. Authenticated connections are never delayed in this manner. The default value is 5 seconds.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>The valid input range for this parameter is from 00:00:00 through 00:10:00. When you set the value to 00:00:00, you disable the tarpit interval.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsCertificateName</maml:name>
      <maml:description>
        <maml:para>The TlsCertificateName parameter specifies the X.509 certificate to use with TLS sessions and secure mail. Valid input for this parameter is [I]Issuer[S]Subject. The Issuer value is found in the certificate's Issuer field, and the Subject value is found in the certificate's Subject field. You can find these values by running the Get-ExchangeCertificate cmdlet.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      <dev:type>
        <maml:name>SmtpX509Identifier</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsDomainCapabilities</maml:name>
      <maml:description>
        <maml:para>The TlsDomainCapabilities parameter specifies the capabilities this Receive connector will make available to specific hosts outside your organization. TLS with certificate validation is used to authenticate remote hosts before these capabilities are offered.</maml:para>
        <maml:para>To specify capabilities for a domain, use the following syntax:</maml:para>
        <maml:para>&lt;domain name 1&gt;:&lt;capability 1, capability 2,…,capability N&gt;</maml:para>
        <maml:para>If you're specifying capabilities for multiple domains, list the configuration for each domain in quotation marks ("), separated by commas. For example:</maml:para>
        <maml:para>"contoso.com:AcceptOorgProtocol","fabrikam.com:AcceptOorgProtocol,AcceptOorgHeader"</maml:para>
        <maml:para>You can configure the capabilities for non-TLS encrypted incoming connections using the special "NO-TLS" domain.</maml:para>
        <maml:para>You can configure the following capabilities for a domain:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AcceptOorgProtocol</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AcceptOorgHeader</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportRole</maml:name>
      <maml:description>
        <maml:para>The TransportRole parameter designates the server role associated with this connector. Types include FrontendTransport and HubTransport. Typically used to specify the server role when you host multiple server roles on a single computer.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Cafe | Mailbox | ClientAccess | UnifiedMessaging | HubTransport | Edge | All | Monitoring | CentralAdmin | CentralAdminDatabase | DomainController | WindowsDeploymentServer | ProvisionedServer | LanguagePacks | FrontendTransport | CafeArray | FfoWebService | OSP | ARR | ManagementFrontEnd | ManagementBackEnd | SCOM | CentralAdminFrontEnd | NAT | DHCP</command:parameterValue>
      <dev:type>
        <maml:name>None | Cafe | Mailbox | ClientAccess | UnifiedMessaging | HubTransport | Edge | All | Monitoring | CentralAdmin | CentralAdminDatabase | DomainController | WindowsDeploymentServer | ProvisionedServer | LanguagePacks | FrontendTransport | CafeArray | FfoWebService | OSP | ARR | ManagementFrontEnd | ManagementBackEnd | SCOM | CentralAdminFrontEnd | NAT | DHCP</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates the custom Receive connector Test with the following properties:</maml:para>
        <maml:para />
        <maml:para>It listens for incoming SMTP connections on the IP address 10.10.1.1 and port 25.</maml:para>
        <maml:para>It accepts incoming SMTP connections only from the IP range 192.168.0.1-192.168.0.24</maml:para>
        <maml:para>New-ReceiveConnector -Name Test -Usage Custom -Bindings 10.10.1.1:25 -RemoteIPRanges 192.168.0.1-192.168.0.24</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Receive connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/eb527447-ed68-4a55-943b-aad8c8a94d01(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>eb7f8960-e772-4312-9d3f-47dd27d9545c
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-ReceiveConnector</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Set-ReceiveConnector cmdlet to change an existing Receive connector.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>ReceiveConnector</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-ReceiveConnector</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">ReceiveConnectorIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AdvertiseClientSettings</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AuthMechanism</maml:name>
        <command:parameterValue required="True">None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Banner</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BareLinefeedRejectionEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BinaryMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Bindings</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ChunkingEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Comment</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionInactivityTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ConnectionTimeout</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DefaultDomain</maml:name>
        <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DeliveryStatusNotificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainSecureEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EightBitMimeEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnableAuthGSSAPI</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>EnhancedStatusCodesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionPolicy</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Fqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LiveCredentialEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>LongAddressesEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxAcknowledgementDelay</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHeaderSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnection</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPercentagePerSource</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxInboundConnectionPerSource</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLocalHopCount</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxLogonFailures</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxMessageSize</maml:name>
        <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxProtocolErrors</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MaxRecipientsPerMessage</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateLimit</maml:name>
        <command:parameterValue required="True">Unlimited</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MessageRateSource</maml:name>
        <command:parameterValue required="True">None | IPAddress | User | All</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OrarEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PermissionGroups</maml:name>
        <command:parameterValue required="True">None | AnonymousUsers | ExchangeUsers | ExchangeServers | ExchangeLegacyServers | Partners | Custom</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PipeliningEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProtocolLoggingLevel</maml:name>
        <command:parameterValue required="True">None | Verbose</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ProxyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RemoteIPRanges</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireEHLODomain</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RequireTLS</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ServiceDiscoveryFqdn</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SizeEnabled</maml:name>
        <command:parameterValue required="True">Disabled | Enabled | EnabledWithoutValue</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SmtpUtf8Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SuppressXAnonymousTls</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TarpitInterval</maml:name>
        <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsCertificateName</maml:name>
        <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TlsDomainCapabilities</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>TransportRole</maml:name>
        <command:parameterValue required="True">None | Cafe | Mailbox | ClientAccess | UnifiedMessaging | HubTransport | Edge | All | Monitoring | CentralAdmin | CentralAdminDatabase | DomainController | WindowsDeploymentServer | ProvisionedServer | LanguagePacks | FrontendTransport | CafeArray | FfoWebService | OSP | ARR | ManagementFrontEnd | ManagementBackEnd | SCOM | CentralAdminFrontEnd | NAT | DHCP</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the GUID or connector name that represents the Receive connector. The parameter label can be omitted.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ReceiveConnectorIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ReceiveConnectorIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AdvertiseClientSettings</maml:name>
      <maml:description>
        <maml:para>The AdvertiseClientSettings parameter specifies whether the SMTP server name, port number, and authentication settings are displayed in Microsoft Office Outlook Web App, accessed from Settings &gt; Options &gt; Account &gt; my Account &gt; Settings for POP or IMAP access.</maml:para>
        <maml:para>The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AuthMechanism</maml:name>
      <maml:description>
        <maml:para>The AuthMechanism parameter specifies the advertised and accepted authentication mechanisms. The authentication options are None, Tls, Integrated, BasicAuth, BasicAuthRequireTLS, ExchangeServer, and ExternalAuthoritative. You can enter multiple values for the AuthMechanism parameter by separating the values with commas. If the RequireTLS parameter is set to $true, the AuthMechanism parameter must be set to Tls (Transport Layer Security). If you set the AuthMechanism parameter to BasicAuthRequireTLS, you must also select BasicAuth and Tls. The AuthMechanism parameter value ExternalAuthoritative may only coexist with the value Tls. If you set the AuthMechanism parameter to ExternalAuthoritative, the PermissionGroups parameter must also have the value ExchangeServers.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</command:parameterValue>
      <dev:type>
        <maml:name>None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Banner</maml:name>
      <maml:description>
        <maml:para>The Banner parameter specifies an override to the default SMTP 220 banner. When the value of the Banner parameter is blank, the default SMTP banner is the following:</maml:para>
        <maml:para />
        <maml:para>220 &lt;Servername&gt; Microsoft ESMTP MAIL service ready at &lt;RegionalDay-Date-24HourTimeFormat&gt; &lt;RegionalTimeZoneOffset&gt;</maml:para>
        <maml:para />
        <maml:para>When you specify a value for the Banner parameter, you must use the following syntax:</maml:para>
        <maml:para />
        <maml:para>"220 &lt;RemainingBannerText&gt;".</maml:para>
        <maml:para />
        <maml:para>220 is the default service ready SMTP response code as defined in RFC 2821.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BareLinefeedRejectionEnabled</maml:name>
      <maml:description>
        <maml:para>The BareLinefeedRejectionEnabled parameter specifies whether this Receive connector rejects messages that contain bare line feed (LF) characters in the SMTP DATA stream.</maml:para>
        <maml:para>Line feed characters that aren't immediately preceded by carriage return (CR) characters are known as bare line feeds. Bare line feeds aren't allowed in SMTP communications. Although it may be possible for a message containing a bare line feed to be delivered successfully, such messages don't adhere to the SMTP protocol standards and may cause problems with messaging servers. If you set this parameter to $true, the Receive connector rejects any messages that contain bare line feeds.</maml:para>
        <maml:para>The default value is $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BinaryMimeEnabled</maml:name>
      <maml:description>
        <maml:para>The BinaryMimeEnabled parameter specifies whether the BINARYMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the BinaryMimeEnabled parameter is set to $true, the BINARYMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the BinaryMimeEnabled parameter is set to $false, the BINARYMIME EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled. The BINARYMIME extension enables remote computers to send binary message data to this Receive connector. The BINARYMIME extension requires the data-chunking service extension, CHUNKING, to be enabled. Therefore, if you set the BinaryMimeEnabled parameter to $true, you should also set the ChunkingEnabled parameter to $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Bindings</maml:name>
      <maml:description>
        <maml:para>The Bindings parameter specifies the local IP address and TCP port numbers used by the Receive connector to listen for inbound messages. Valid syntax for this parameter is &lt;IP Address&gt;:&lt;TCP Port&gt;, such as 192.168.1.1:25. The IP address 0.0.0.0 indicates that the Receive connector uses all IP addresses configured on all network adapters to listen for inbound messages.</maml:para>
        <maml:para>You must specify a local IP address that's valid for the Mailbox server or Edge server on which the Receive connector is located. If you specify an invalid local IP address, the Microsoft Exchange Transport service may fail to start when the service is restarted. To specify all IP addresses configured on all network adapters, you can use the IP address 0.0.0.0.</maml:para>
        <maml:para>The values that you specify by using the Bindings parameter must satisfy one of the following requirements for uniqueness:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>You can specify a unique combination of IP address and TCP port that doesn't conflict with the IP address or TCP port used in the Bindings parameter of another Receive connector on the server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>You can use an existing combination of IP address and TCP port, but use the RemoteIPRanges parameter to restrict the remote servers serviced by the Receive connector.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ChunkingEnabled</maml:name>
      <maml:description>
        <maml:para>The ChunkingEnabled parameter specifies whether the CHUNKING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the ChunkingEnabled parameter is set to $true, the CHUNKING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the ChunkingEnabled parameter is set to $false, the CHUNKING EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled. The CHUNKING extension enables large message bodies to be relayed by the remote server to the Receive connector in multiple, smaller chunks.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Comment</maml:name>
      <maml:description>
        <maml:para>The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectionInactivityTimeout</maml:name>
      <maml:description>
        <maml:para>The ConnectionInactivityTimeout parameter specifies the maximum amount of idle time before a connection to a Receive connector is closed. The default value for a Receive connector configured in the Transport service of a Mailbox server is 5 minutes. The default value for a Receive connector configured on an Edge server is 1 minute.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify a connection inactivity time-out of 5 minutes, enter 00:05:00.</maml:para>
        <maml:para>The value specified by the ConnectionTimeout parameter must be greater than the value specified by the ConnectionInactivityTimeout parameter. The valid input range for either parameter is from 00:00:01 through 1.00:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ConnectionTimeout</maml:name>
      <maml:description>
        <maml:para>The ConnectionTimeout parameter specifies the maximum time that a connection can remain open, even if the connection is actively transmitting data. The default value for a Receive connector configured on a Mailbox server is 10 minutes The default value for a Receive connector configured on an Edge server is 5 minutes.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>For example, to specify a connection time-out of 5 minutes, enter 00:05:00.</maml:para>
        <maml:para>The value specified by the ConnectionTimeout parameter must be greater than the value specified by the ConnectionInactivityTimeout parameter. The valid input range for either parameter is from 00:00:01 through 1.00:00:00.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DefaultDomain</maml:name>
      <maml:description>
        <maml:para>The DefaultDomain parameter specifies the domain name to append to values submitted to MAIL FROM or RCPT TO in the message envelope by a sending server if no domain name is provided.</maml:para>
      </maml:description>
      <command:parameterValue required="True">AcceptedDomainIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>AcceptedDomainIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DeliveryStatusNotificationEnabled</maml:name>
      <maml:description>
        <maml:para>The DeliveryStatusNotificationEnabled parameter specifies whether the delivery status notification (DSN) EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the DeliveryStatusNotificationEnabled parameter is set to $true, the DSN EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the DeliveryStatusNotificationEnabled parameter is set to $false, the DSN EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled. The DSN extension to extended SMTP (ESMTP) provides enhanced DSN functionality specified in RFC 1891.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainSecureEnabled</maml:name>
      <maml:description>
        <maml:para>The DomainSecureEnabled parameter specifies the first part of the process to enable mutual Transport Layer Security (TLS) authentication for the domains serviced by this Receive connector. Mutual TLS authentication functions correctly only if the following conditions are true:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>The value of the DomainSecureEnabled parameter is $true.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The value of the AuthMechanism parameter contains Tls and doesn't contain ExternalAuthoritative.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The TLSReceiveDomainSecureList attribute of your transport configuration contains at least one domain serviced by this Receive connector. The wildcard character (*) isn't supported in domains configured for mutual TLS authentication. The same domain must also be defined on the corresponding Send connector, and in the value of the TLSSendDomainSecureList attribute of your Transport configuration.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value for the DomainSecureEnabled parameter is $false for the following types of Receive connectors:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>All Receive connectors defined on a Mailbox server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User-created Receive connectors defined on an Edge server.</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value for DomainSecureEnabled is $true for default Receive connectors defined on an Edge server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EightBitMimeEnabled</maml:name>
      <maml:description>
        <maml:para>The EightBitMimeEnabled parameter specifies whether the 8BITMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the EightBitMimeEnabled parameter is set to $true, the 8BITMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the EightBitMimeEnabled parameter is set to $false, the 8BITMIME EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnableAuthGSSAPI</maml:name>
      <maml:description>
        <maml:para>The EnableAuthGSSAPI parameter specifies how to control the advertisement of the Generic Security Services application programming interface (GSSAPI) authentication method when Integrated Windows authentication is enabled on this connector. If the AuthMechanism parameter contains Integrated, and the EnableAuthGSSAPI parameter is set to $true, the AUTH GSSAPI NTLM keyword is advertised in the EHLO response of the Receive connector. Clients may use Kerberos or NTLM to authenticate with the Receive connector. If the AuthMechanism parameter contains Integrated, and the EnableAuthGSSAPI parameter is set to $false, the AUTH NTLM keyword is advertised in the EHLO response of the Receive connector. Clients may only use NTLM to authenticate with the Receive connector.</maml:para>
        <maml:para>If you have Internet Information Services (IIS) messaging servers that authenticate with this Receive connector, you should set the value of the EnableAuthGSSAPI parameter to $false. Authentication with computers running Microsoft Exchange Server 2003 isn't affected by the value of the EnableAuthGSSAPI parameter. Exchange 2003 servers use the authentication methods advertised in the X-EXPS keyword. The X-EXPS keyword is advertised in the EHLO response of the Receive connector when the AuthMechanism parameter contains ExchangeServer.</maml:para>
        <maml:para>Valid values for this parameter are $true or $false. The default value is $false. By default, the EnableAuthGSSAPI parameter is set to $true only on the default Receive connector Client &lt;Server Name&gt; that's created only in the Transport service on a Mailbox server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether to enable the connector. Valid values for this parameter are $true or $false. The default value is $true. Use the Enabled parameter to enable or disable the connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>EnhancedStatusCodesEnabled</maml:name>
      <maml:description>
        <maml:para>The EnhancedStatusCodesEnabled parameter specifies whether the ENHANCEDSTATUSCODES EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the EnhancedStatusCodesEnabled parameter is set to $true, the ENHANCEDSTATUSCODES EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the EnhancedStatusCodesEnabled parameter is set to $false, the ENHANCEDSTATUSCODES EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled. The ENHANCEDSTATUSCODES extension provides enhanced error and status information in DSNs sent to remote servers.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionPolicy</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionPolicy parameter specifies how you want to use Extended Protection for Authentication on this Receive connector. By default, this parameter is set to None. The following are the valid values of this parameter:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Extended Protection for Authentication won't be used.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Allow Extended Protection for Authentication will be used only if the connecting host supports it. Otherwise, the connections will be established without Extended Protection for Authentication.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Require Extended Protection for Authentication will be required for all incoming connections to this Receive connector. If the connecting host doesn't support Extended Protection for Authentication, the connection will be rejected.</maml:para>
        </command:listItem></command:list>
        <maml:para>Extended Protection for Authentication enhances the protection and handling of credentials when authenticating network connections using Integrated Windows authentication. Integrated Windows authentication is also known as NTLM. We strongly recommend that you use Extended Protection for Authentication if you are using Integrated Windows authentication.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      <dev:type>
        <maml:name>None | Allow | Require</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Fqdn</maml:name>
      <maml:description>
        <maml:para>The Fqdn parameter specifies the FQDN used as the destination server for connected messaging servers that use the Receive connector to send incoming messages. The value of this parameter is displayed to connected messaging servers whenever a destination server name is required, as in the following examples:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>In the default SMTP banner of the Receive connector</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>In the EHLO/HELO response of the Receive connector</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>In the most recent Received header field in the incoming message when the message enters the Transport service on a Mailbox server or an Edge server</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>During TLS authentication</maml:para>
        </command:listItem></command:list>
        <maml:para>The default value of the Fqdn parameter is the FQDN of the Mailbox server or Edge server that contains the Receive connector.</maml:para>
        <maml:para>Don't modify the FQDN value on the default Receive connector Default &lt;Server Name&gt; that's automatically created on Mailbox servers. If you have multiple Mailbox servers in your Exchange organization and you change the FQDN value on the Default &lt;Server Name&gt; Receive connector, internal mail flow between Mailbox servers fails.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LiveCredentialEnabled</maml:name>
      <maml:description>
        <maml:para>The LiveCredentialEnabled parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>LongAddressesEnabled</maml:name>
      <maml:description>
        <maml:para>The LongAddressesEnabled parameter enables the Receive connector to accept long X.400 email addresses. The X.400 email addresses are encapsulated in SMTP email addresses by using the Internet Mail Connector Encapsulated Address (IMCEA) encapsulation method.</maml:para>
        <maml:para>When the value of this parameter is $false, the maximum length for a complete SMTP email address is 571 characters.</maml:para>
        <maml:para>When the value of this parameter is $true, the following changes are made:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>The XLONGADDR keyword is advertised in the EHLO response of the Receive connector.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>The accepted line length of an SMTP session is increased to 8,000 characters.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Valid long addresses are accepted by the MAIL FROM and RCPT TO SMTP commands.</maml:para>
        </command:listItem></command:list>
        <maml:para>Therefore, X.400 email addresses can be up to 1,860 characters long after IMCEA encapsulation.</maml:para>
        <maml:para>Valid values for this parameter are $true or $false. The default value is $false. You can only modify this parameter on Receive connectors configured in the Transport service on a Mailbox server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxAcknowledgementDelay</maml:name>
      <maml:description>
        <maml:para>This parameter isn't used by Microsoft Exchange Server 2013. It's only used by Microsoft Exchange 2010 servers in a coexistence environment.</maml:para>
        <maml:para>The MaxAcknowledgementDelay parameter specifies the period the transport server delays acknowledgement when receiving messages from a host that doesn't support shadow redundancy. When receiving messages from a host that doesn't support shadow redundancy, a Microsoft Exchange Server 2010 transport server delays issuing an acknowledgement until it verifies that the message has been successfully delivered to all recipients. However, if it takes too long to verify successful delivery, the transport server times out and issues an acknowledgement anyway. The default value is 30 seconds.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxHeaderSize</maml:name>
      <maml:description>
        <maml:para>The MaxHeaderSize parameter specifies in bytes the maximum size of the SMTP message header that the Receive connector accepts before it closes the connection. The default value is 65536 bytes.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 1 through 2147483647 bytes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxHopCount</maml:name>
      <maml:description>
        <maml:para>The MaxHopCount parameter specifies the maximum number of hops that a message can take before the message is rejected by the Receive connector. The maximum number of hops is determined by the number of Received headers in a submitted message. The default value is 60. The valid input range for this parameter is from 1 through 500.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxInboundConnection</maml:name>
      <maml:description>
        <maml:para>The MaxInboundConnection parameter specifies the maximum number of inbound connections that this Receive connector serves at the same time. The default value is 5000. The valid input range for this parameter is from 1 through 2147483647. To disable the inbound connection limit on a Receive connector, enter a value of unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxInboundConnectionPercentagePerSource</maml:name>
      <maml:description>
        <maml:para>The MaxInboundConnectionPercentagePerSource parameter specifies the maximum number of connections that a Receive connector serves at the same time from a single IP address. The value is expressed as the percentage of available remaining connections on a Receive connector. Enter the value as an integer without the percent (%) character. The default value is 2 percent. The valid input range for this parameter is from 1 through 100.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxInboundConnectionPerSource</maml:name>
      <maml:description>
        <maml:para>The MaxInboundConnectionPerSource parameter specifies the maximum number of inbound connections that this Receive connector serves at the same time from a single IP address. The default value is 100. The valid input range for this parameter is from 1 through 10000. To disable the inbound connection per source limit on a Receive connector, enter a value of unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxLocalHopCount</maml:name>
      <maml:description>
        <maml:para>The MaxLocalHopCount parameter specifies the maximum number of local hops that a message can take before the message is rejected by the Receive connector. The maximum number of local hops is determined by the number of Received headers that have local server addresses in a submitted message. The default value is 8. The valid input range for this parameter is from 0 through 50. When you specify a value of 0, the message is never rejected based on the number of local hops.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxLogonFailures</maml:name>
      <maml:description>
        <maml:para>The MaxLogonFailures parameter specifies the number of logon failures that the Receive connector retries before closing the connection. The default value is 3. The valid input range for this parameter is from 0 through 10.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxMessageSize</maml:name>
      <maml:description>
        <maml:para>The MaxMessageSize parameter specifies the maximum size of a message. The default value is 10 MB.</maml:para>
        <maml:para>When you enter a value, qualify the value with one of the following units:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>B (bytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>KB (kilobytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>MB (megabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GB (gigabytes)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>TB (terabytes)</maml:para>
        </command:listItem></command:list>
        <maml:para>Unqualified values are treated as bytes.</maml:para>
        <maml:para>The valid input range for this parameter is from 65536 through 2147483647 bytes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ByteQuantifiedSize</command:parameterValue>
      <dev:type>
        <maml:name>ByteQuantifiedSize</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxProtocolErrors</maml:name>
      <maml:description>
        <maml:para>The MaxProtocolErrors parameter specifies the maximum number of SMTP protocol errors that the Receive connector accepts before closing the connection. The default value is 5. The valid input range for this parameter is from 0 through 2147483647. When you specify a value of unlimited, a connection is never closed because of protocol errors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MaxRecipientsPerMessage</maml:name>
      <maml:description>
        <maml:para>The MaxRecipientsPerMessage parameter specifies the maximum number of recipients per message that the Receive connector accepts before closing the connection. The default value is 200. The valid input range for this parameter is from 1 through 512000.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageRateLimit</maml:name>
      <maml:description>
        <maml:para>The MessageRateLimit parameter specifies the maximum number of messages that can be sent by a single client IP address per minute. The default value for a Receive connector configured in the Transport service on a Mailbox server is unlimited. The default value for a Receive connector configured on an Edge server is 600 messages per minute. The valid input range for this parameter is 1 to 2147483647. To remove the message rate limit on a Receive connector, enter a value of unlimited.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Unlimited</command:parameterValue>
      <dev:type>
        <maml:name>Unlimited</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MessageRateSource</maml:name>
      <maml:description>
        <maml:para>The MessageRateSource parameter specifies how the message submission rate is calculated. It can have one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None No message submission rate is calculated.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>IPAddress The message submission rate is calculated for sending hosts.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>User The message submission rate is calculated for sending users (specified with the MAIL FROM SMTP command).</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>All The message submission rate is calculated for both the sending users and sending hosts.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">None | IPAddress | User | All</command:parameterValue>
      <dev:type>
        <maml:name>None | IPAddress | User | All</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the administrator-supplied name of the connector. Enter the Name parameter as a string, for example: New Receive Connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OrarEnabled</maml:name>
      <maml:description>
        <maml:para>The OrarEnabled parameter specifies whether to enable the Originator Requested Alternate Recipient (ORAR). When the value of this parameter is $false, ORAR isn't supported. When the value of this parameter is $true, ORAR is supported by advertising the XORAR keyword in the EHLO response of the Receive connector. The actual ORAR information is transmitted in the RCPT TO SMTP command.</maml:para>
        <maml:para>Valid values for this parameter are $true or $false. The default value is $false. If the email address specified in the ORAR information is a long X.400 email address, the LongAddressesEnabled parameter must be $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PermissionGroups</maml:name>
      <maml:description>
        <maml:para>The PermissionGroups parameter specifies the groups or roles that can submit messages to the Receive connector and the permissions assigned to those groups. A permission group is a predefined set of permissions granted to well-known security principals. The valid values for this parameter are as follows: None, AnonymousUsers, Custom, ExchangeUsers, ExchangeServers, ExchangeLegacyServers, and Partners. The default permission groups assigned to a Receive connector depend on the connector usage type specified by the Usage parameter when the Receive connector was created. For more information about Receive connector usage types, see Receive connectors.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | AnonymousUsers | ExchangeUsers | ExchangeServers | ExchangeLegacyServers | Partners | Custom</command:parameterValue>
      <dev:type>
        <maml:name>None | AnonymousUsers | ExchangeUsers | ExchangeServers | ExchangeLegacyServers | Partners | Custom</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PipeliningEnabled</maml:name>
      <maml:description>
        <maml:para>The PipeliningEnabled parameter specifies whether the PIPELINING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the PipeliningEnabled parameter is set to $true, the PIPELINING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the PipeliningEnabled parameter is set to $false, the PIPELINING EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled. The PIPELINING extension enables the remote server to send requests without awaiting a response from this Receive connector.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProtocolLoggingLevel</maml:name>
      <maml:description>
        <maml:para>The ProtocolLoggingLevel parameter specifies whether to enable protocol logging for the specified Receive connector. A value of Verbose enables protocol logging for the connector. A value of None disables protocol logging for the connector. The default value is None. The location of the Receive connector protocol logs for all Receive connectors configured in the Transport service on a Mailbox server or an Edge server is specified by using the Set-TransportService cmdlet with the ReceiveProtocolLogPath parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Verbose</command:parameterValue>
      <dev:type>
        <maml:name>None | Verbose</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ProxyEnabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RemoteIPRanges</maml:name>
      <maml:description>
        <maml:para>The RemoteIPRanges parameter specifies the remote IP addresses from which this connector accepts messages. Valid syntax for this parameter is &lt;Starting IP Address&gt;-&lt;Ending IP Address&gt;, such as 192.168.1.1-192.168.1.10.</maml:para>
        <maml:para>To enter multiple values and overwrite any existing entries, use the following syntax: &lt;value1&gt;,&lt;value2&gt;.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "&lt;value1&gt;","&lt;value2&gt;"....</maml:para>
        <maml:para>To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="&lt;value1&gt;","&lt;value2&gt;"...; Remove="&lt;value1&gt;","&lt;value2&gt;"...}.</maml:para>
        <maml:para>Multiple Receive connectors on the same server can have overlapping remote IP address ranges as long as one IP address range is completely overlapped by another IP address range. When remote IP address ranges overlap, the remote IP address range with the most specific match to the IP address of the connecting server is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequireEHLODomain</maml:name>
      <maml:description>
        <maml:para>The RequireEHLODomain parameter specifies whether the remote computer must provide a domain name in the EHLO handshake after the SMTP connection is established. Valid values for this parameter are $true or $false. The default value is $false. When the RequireEHLODomain parameter is set to $true, the remote computer must provide a domain name in the EHLO handshake after the SMTP connection is established. If the remote computer doesn't provide the domain name, the SMTP connection is closed.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RequireTLS</maml:name>
      <maml:description>
        <maml:para>The RequireTLS parameter specifies whether all messages received by this connector require TLS transmission. Valid values for thisparameter are $true or $false. The default value is $false. When the RequireTLS parameter is set to $true, all messages received by this connector require TLS transmission.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ServiceDiscoveryFqdn</maml:name>
      <maml:description>
        <maml:para>The service discovery fully-qualified domain name (FQDN).</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SizeEnabled</maml:name>
      <maml:description>
        <maml:para>The SizeEnabled parameter specifies whether the SIZE SMTP extension is enabled. Valid values for this parameter are Enabled, Disabled, or EnabledwithoutValue. The default value is Enabled. When the SizeEnabled parameter is set to Enabled, the SIZE SMTP extension is enabled, and the maximum allowable message size value from the MaxMessageSize parameter is advertised in the EHLO banner. When the SizeEnabled parameter is set to Disabled, the SIZE SMTP extension isn't used, and the maximum allowable message size value is never disclosed to the remote server. When the SizeEnabled parameter is set to EnabledWithoutValue, the SIZE SMTP extension is enabled, but the maximum allowable message size value from the MaxMessageSize parameter isn't advertised in the EHLO banner. This allows the message to bypass message size checks for authenticated connections between Mailbox servers. The SIZE SMTP extension is defined in RFC 1870. SIZE enables the source server to declare the size of the inbound message to the target server. It also allows the target server to declare the maximum message size that it's allowed to accept to the sending server. If the advertised size of the inbound message exceeds the value in the MaxMessageSize parameter, the Receive connector responds to the remote server by using an error code and closes the connection.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Disabled | Enabled | EnabledWithoutValue</command:parameterValue>
      <dev:type>
        <maml:name>Disabled | Enabled | EnabledWithoutValue</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SmtpUtf8Enabled</maml:name>
      <maml:description>
        <maml:para>This parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SuppressXAnonymousTls</maml:name>
      <maml:description>
        <maml:para>The SuppressXAnonymousTls parameter specifies whether this Receive connector supports the standard TLS encryption for incoming connections. By default, all communications between Exchange 2010 Mailbox servers is protected with TLS. However, if you need to disable TLS on a specific connection in your organization, you can create a specific Receive connector and set the SuppressXAnonymousTls parameter to $true. The default value is $false.</maml:para>
        <maml:para>Before you can set this parameter to $true, you must use the Set-TransportService command to set the UseDownGradedExchangeServerAuth parameter to $true on the server that this Receive connector is configured on.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TarpitInterval</maml:name>
      <maml:description>
        <maml:para>The TarpitInterval parameter specifies the period of time to delay an SMTP response to a remote server that may be abusing the connection. Authenticated connections are never delayed in this manner. The default value is 5 seconds.</maml:para>
        <maml:para>To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.</maml:para>
        <maml:para>The valid input range for this parameter is from 00:00:00 through 00:10:00. When you set the value to 00:00:00, you disable the tarpit interval.</maml:para>
      </maml:description>
      <command:parameterValue required="True">EnhancedTimeSpan</command:parameterValue>
      <dev:type>
        <maml:name>EnhancedTimeSpan</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsCertificateName</maml:name>
      <maml:description>
        <maml:para>The TlsCertificateName parameter specifies the X.509 certificate to use with TLS sessions and secure mail. Valid input for this parameter is [I]Issuer[S]Subject. The Issuer value is found in the certificate's Issuer field, and the Subject value is found in the certificate's Subject field. You can find these values by running the Get-ExchangeCertificate cmdlet.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SmtpX509Identifier</command:parameterValue>
      <dev:type>
        <maml:name>SmtpX509Identifier</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TlsDomainCapabilities</maml:name>
      <maml:description>
        <maml:para>The TlsDomainCapabilities parameter specifies the different capabilities this Receive connector will make available to specific hosts outside your organization. TLS with certificate validation is used to authenticate remote hosts before these capabilities are offered.</maml:para>
        <maml:para>To specify capabilities for a domain, use the following syntax:</maml:para>
        <maml:para>&lt;domain name 1&gt;:&lt;capability 1, capability 2,…,capability N&gt;</maml:para>
        <maml:para>If you're specifying capabilities for multiple domains, list the configuration for each domain in quotation marks, separated by commas. For example:</maml:para>
        <maml:para>"contoso.com:AcceptOorgProtocol","fabrikam.com:AcceptOorgProtocol,AcceptOorgHeader"</maml:para>
        <maml:para>You can configure the capabilities for non-TLS encrypted incoming connections using the special "NO-TLS" domain.</maml:para>
        <maml:para>You can configure the following capabilities for a domain:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>AcceptOorgProtocol</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AcceptOorgHeader</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>TransportRole</maml:name>
      <maml:description>
        <maml:para>The TransportRole parameter designates the server role associated with this connector. Types include FrontendTransport and HubTransport. Typically used to specify the server role when you host multiple server roles on a single computer.</maml:para>
      </maml:description>
      <command:parameterValue required="True">None | Cafe | Mailbox | ClientAccess | UnifiedMessaging | HubTransport | Edge | All | Monitoring | CentralAdmin | CentralAdminDatabase | DomainController | WindowsDeploymentServer | ProvisionedServer | LanguagePacks | FrontendTransport | CafeArray | FfoWebService | OSP | ARR | ManagementFrontEnd | ManagementBackEnd | SCOM | CentralAdminFrontEnd | NAT | DHCP</command:parameterValue>
      <dev:type>
        <maml:name>None | Cafe | Mailbox | ClientAccess | UnifiedMessaging | HubTransport | Edge | All | Monitoring | CentralAdmin | CentralAdminDatabase | DomainController | WindowsDeploymentServer | ProvisionedServer | LanguagePacks | FrontendTransport | CafeArray | FfoWebService | OSP | ARR | ManagementFrontEnd | ManagementBackEnd | SCOM | CentralAdminFrontEnd | NAT | DHCP</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example makes the following configuration changes to the Receive connector Internet Receive Connector:</maml:para>
        <maml:para />
        <maml:para>Sets the Banner to 220 SMTP OK.</maml:para>
        <maml:para>Configures the Receive connector to time out connections after 15 minutes.</maml:para>
        <maml:para>Set-ReceiveConnector -Identity "Internet Receive Connector" -Banner "220 SMTP OK" -ConnectionTimeout 00:15:00</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Receive connectors" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/eb7f8960-e772-4312-9d3f-47dd27d9545c(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>eff7df8c-3c92-4004-89dd-0a06511e8668
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Remove-MapiVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the Remove-MapiVirtualDirectory cmdlet to remove Message Application Programming Interface (MAPI) virtual directories from Microsoft Exchange 2013 servers. A MAPI virtual directory is used by supported versions of Microsoft Outlook to connect to mailboxes by using the MAPIHTTP protocol.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Remove</command:verb>
    <command:noun>MapiVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Remove-MapiVirtualDirectory</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the MAPI virtual directory that you want to remove.</maml:para>
        <maml:para>You can use any value that uniquely identifies the virtual directory. For example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name or &lt;Server&gt;\Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>GUID</maml:para>
        </command:listItem></command:list>
        <maml:para>The Name value uses the syntax "&lt;VirtualDirectoryName&gt; (&lt;WebsiteName&gt;)" from the properties of the virtual directory. You can specify the wildcard character (*) instead of the default website by using the syntax &lt;VirtualDirectoryName&gt;*.</maml:para>
      </maml:description>
      <command:parameterValue required="True">VirtualDirectoryIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>VirtualDirectoryIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- Example 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example removes the MAPI virtual directory from the local server named ContosoMail. All three commands do the same thing.</maml:para>
        <maml:para />
        <maml:para>Remove-MapiVirtualDirectory -Identity "ContosoMail\mapi (Default Web Site)"</maml:para>
        <maml:para>Remove-MapiVirtualDirectory "mapi (Default Web Site)"</maml:para>
        <maml:para>Remove-MapiVirtualDirectory mapi*</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Client Access virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/eff7df8c-3c92-4004-89dd-0a06511e8668(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>f16d1732-0bc9-438a-a286-05b8c42a9bab
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-WebServicesVirtualDirectory</command:name>
    <maml:description>
      <maml:para>This cmdlet is available only in on-premises Exchange Server 2013.</maml:para>
      <maml:para>Use the New-WebServicesVirtualDirectory cmdlet to create an Exchange Web Services virtual directory on a server running Microsoft Exchange Server 2013.</maml:para>
      <maml:para>You can use this cmdlet to create multiple virtual directories. However, you can create only one Exchange Web Services virtual directory organization.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>WebServicesVirtualDirectory</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-WebServicesVirtualDirectory</maml:name>
      <command:parameter required="False">
        <maml:name>ApplicationRoot</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AppPoolId</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>AppPoolIdForManagement</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>BasicAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DigestAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionFlags</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionSPNList</maml:name>
        <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExtendedProtectionTokenChecking</maml:name>
        <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ExternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>GzipLevel</maml:name>
        <command:parameterValue required="True">Off | Low | High | Error</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalNLBBypassUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>InternalUrl</maml:name>
        <command:parameterValue required="True">Uri</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>MRSProxyEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>OAuthAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Path</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Role</maml:name>
        <command:parameterValue required="True">ClientAccess | Mailbox</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Server</maml:name>
        <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WebSiteName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WindowsAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WSSecurityAuthentication</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ApplicationRoot</maml:name>
      <maml:description>
        <maml:para>The ApplicationRoot parameter sets the metabase path of the virtual directory. By default, this path is the same as the website in which the virtual directory is created.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AppPoolId</maml:name>
      <maml:description>
        <maml:para>The AppPoolId parameter sets the pool of programs that can be used with the virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>AppPoolIdForManagement</maml:name>
      <maml:description>
        <maml:para>The AppPoolIdForManagement parameter specifies the pool of programs that manages the virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>BasicAuthentication</maml:name>
      <maml:description>
        <maml:para>The BasicAuthentication parameter specifies whether Basic authentication is enabled on the Exchange Web Services virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DigestAuthentication</maml:name>
      <maml:description>
        <maml:para>The DigestAuthentication parameter specifies whether Digest authentication is enabled on the virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionFlags</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionFlags parameter is used to customize the options you use if you're using Extended Protection for Authentication. The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Default setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Proxy Specifies that a proxy is terminating the SSL channel. A Service Principal Name (SPN) must be registered in the ExtendedProtectionSPNList parameter if proxy mode is configured.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>ProxyCoHosting Specifies that both HTTP and HTTPS traffic may be accessing the Client Access server and that a proxy is located between at least some of the clients and the Client Access server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>AllowDotlessSPN Specifies whether you want to support valid SPNs that aren't in the fully qualified domain name (FQDN) format, for example ContosoMail. You specify valid SPNs with the ExtendedProtectionSPNList parameter. This option makes extended protection less secure because dotless certificates aren't unique, so it isn't possible to ensure that the client-to-proxy connection was established over a secure channel.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>NoServiceNameCheck Specifies that the SPN list won't be checked to validate a channel binding token. This option makes Extended Protection for Authentication less secure. We generally don't recommend this setting.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionSPNList</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionSPNList parameter specifies a list of valid Service Principal Names (SPNs) if you're using Extended Protection for Authentication on the specified virtual directory.</maml:para>
        <maml:para>The possible values are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Null This is the default value.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Single SPN or comma delimited list of valid SPNs By default, you must specify the fully qualified domain name (FQDN) (for example mail.contoso.com) for each SPN. If you want to add an SPN that's not an FQDN (for example, ContosoMail), you must also use the ExtendedProtectionTokenChecking parameter with the AllowDotlessSPN value. You specify the domain in SPN format. The SPN format is &lt;protocol&gt;/&lt;FQDN&gt;. For example, a valid entry could be HTTP/mail.contoso.com.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">MultiValuedProperty</command:parameterValue>
      <dev:type>
        <maml:name>MultiValuedProperty</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExtendedProtectionTokenChecking</maml:name>
      <maml:description>
        <maml:para>The ExtendedProtectionTokenChecking parameter defines how you want to use Extended Protection for Authentication on the specified Exchange virtual directory. Extended Protection for Authentication isn't enabled by default. The available settings are:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>None Extended Protection for Authentication won't be used. Connections between the client and Exchange won't use Extended Protection for Authentication on this virtual directory. This is the default setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Allow Extended Protection for Authentication will be used for connections between the client and Exchange on this virtual directory if both the client and server support Extended Protection for Authentication. Connections that don't support Extended Protection for Authentication on the client and server will work, but may not be as secure as a connection using Extended Protection for Authentication.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more Service Principal Names (SPNs) by using the ExtendedProtectionSPNList parameter.</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Require Extended Protection for Authentication will be used for all connections between clients and Exchange servers for this virtual directory. If either the client or server doesn't support Extended Protection for Authentication, the connection between the client and server will fail. If you set this option, you must also set a value for the ExtendedProtectionSPNList parameter.</maml:para>
        </command:listItem></command:list>
        <maml:para>If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more SPNs using the parameter ExtendedProtectionSPNList.</maml:para>
        <maml:para />
      </maml:description>
      <command:parameterValue required="True">None | Allow | Require</command:parameterValue>
      <dev:type>
        <maml:name>None | Allow | Require</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ExternalUrl</maml:name>
      <maml:description>
        <maml:para>The ExternalUrl parameter specifies the host name used to connect to the Exchange server from outside the firewall. This setting is also important when Secure Sockets Layer (SSL) is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress the warning or confirmation messages that appear during specific configuration changes.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>GzipLevel</maml:name>
      <maml:description>
        <maml:para>The GzipLevel parameter sets Gzip configuration information for the Exchange Web Services virtual directory. This parameter can be set to the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Off This value results in no compression.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Low This value results in static compression only. Don't use this setting for Exchange Web Services because Exchange Web Services content is dynamic. You'll get a warning if you set the GzipLevel parameter to this value. If you use this setting, it behaves the same as the Off setting.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>High This value results in static and dynamic compression. Content from Exchange Web Services is compressed if clients have indicated support for Gzip compression in their requests.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Error This value identifies errors in the Gzip compression configuration.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">Off | Low | High | Error</command:parameterValue>
      <dev:type>
        <maml:name>Off | Low | High | Error</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalNLBBypassUrl</maml:name>
      <maml:description>
        <maml:para>The InternalNLBBypassUrl parameter specifies the URL of the Client Access server, regardless of whether it's behind a Network Load Balancing (NLB) array. Although the InternalUrl parameter is set to the URL of the NLB array, the InternalNLBBypassUrl parameter should always be set to the URL of the Client Access server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>InternalUrl</maml:name>
      <maml:description>
        <maml:para>The InternalUrl parameter specifies the host name of the Exchange server for a connection from inside the firewall. This setting is also important when SSL is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Uri</command:parameterValue>
      <dev:type>
        <maml:name>Uri</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>MRSProxyEnabled</maml:name>
      <maml:description>
        <maml:para>The MRSProxyEnabled parameter specifies whether to enable MRSProxy for the Client Access server. MRSProxy is a service that runs on Client Access servers in a remote forest and helps to proxy a mailbox move. For more information, see Mailbox moves in Exchange 2013.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>OAuthAuthentication</maml:name>
      <maml:description>
        <maml:para>The OAuthAuthentication parameter specifies whether OAuth authentication is enabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Path</maml:name>
      <maml:description>
        <maml:para>The Path parameter sets the path of the virtual directory in the metabase.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Role</maml:name>
      <maml:description>
        <maml:para>The Role parameter specifies the configuration that should be used when the virtual directory is created. The following are the values that can be used with this parameter:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>FrontEnd Configures the virtual directory for use on a Client Access server.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>BackEnd Configures the virtual directory for use on a Mailbox server.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">ClientAccess | Mailbox</command:parameterValue>
      <dev:type>
        <maml:name>ClientAccess | Mailbox</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>Server</maml:name>
      <maml:description>
        <maml:para>The Server parameter specifies the Exchange server on which you want to create the virtual directory. You can use any value that uniquely identifies the server, for example:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>Name</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>FQDN</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Distinguished name (DN)</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>Exchange Legacy DN</maml:para>
        </command:listItem></command:list>
        <maml:para>If you don't use the Server parameter, the virtual directory is created on the server where the Remote PowerShell session is established This will always be a Mailbox server. If you want to create the virtual directory on a Client Access server or another Mailbox server, you must use the Server parameter.</maml:para>
      </maml:description>
      <command:parameterValue required="True">ServerIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>ServerIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WebSiteName</maml:name>
      <maml:description>
        <maml:para>The WebSiteName parameter specifies the name of the website under which to create the virtual directory. This parameter shouldn't be used when you're creating a virtual directory under the default website.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WindowsAuthentication</maml:name>
      <maml:description>
        <maml:para>The WindowsAuthentication parameter specifies whether Integrated Windows authentication is permitted on the new Exchange Web Services virtual directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WSSecurityAuthentication</maml:name>
      <maml:description>
        <maml:para>The WSSecurityAuthentication parameter specifies whether Web Services Security authentication is enabled on the Exchange Web Services virtual directory. This parameter can be used with the BasicAuthentication, DigestAuthentication, and WindowsAuthentication parameters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example creates a virtual directory under the non-default website www.contoso.com. It also sets the external URL to https://www.contoso.com/webservices.aspx.</maml:para>
        <maml:para />
        <maml:para>New-WebServicesVirtualDirectory -WebSiteName "www.contoso.com" -ExternalUrl "https://www.contoso.com/webservices.aspx"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You can create multiple virtual directories by using this cmdlet. However, you can only create one Exchange Web Services virtual directory for each website.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Exchange Web Services virtual directory settings" entry in the Clients and mobile devices permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/f16d1732-0bc9-438a-a286-05b8c42a9bab(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>f6be04e8-bd1c-41ee-b410-e832de66048f
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Disable-OutlookProtectionRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Disable-OutlookProtectionRule cmdlet to disable an existing Microsoft Outlook protection rule.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Disable</command:verb>
    <command:noun>OutlookProtectionRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Disable-OutlookProtectionRule</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name of the rule being disabled.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RuleIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RuleIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example disables the Outlook protection rule Project Contoso.</maml:para>
        <maml:para />
        <maml:para>Disable-OutlookProtectionRule -Identity "Project Contoso"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Outlook protection rules are administrator-created rules applied before a user sends a message using Outlook. Outlook protection rules are used to automatically Information Rights Management (IRM)-protect email messages using a Rights Management Services (RMS) template before the message is sent. However, Outlook protection rules don't inspect message content. To rights-protect messages based on message content, use transport protection rules.</maml:para>
    <maml:para>For more information, see Outlook protection rules.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Information Rights Management (IRM) configuration" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/f6be04e8-bd1c-41ee-b410-e832de66048f(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>fd1ca109-ff80-492a-8112-62b3e9218594
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>New-OutlookProtectionRule</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the New-OutlookProtectionRule cmdlet to create a Microsoft Outlook protection rule.</maml:para>
      <maml:para>For information about the parameter sets in the Syntax section below, see Syntax.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>New</command:verb>
    <command:noun>OutlookProtectionRule</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>New-OutlookProtectionRule</maml:name>
      <command:parameter required="True">
        <maml:name>ApplyRightsProtectionTemplate</maml:name>
        <command:parameterValue required="True">RmsTemplateIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="True">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Enabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Force</maml:name>
        <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>FromDepartment</maml:name>
        <command:parameterValue required="True">String[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Organization</maml:name>
        <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Priority</maml:name>
        <command:parameterValue required="True">Int32</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentTo</maml:name>
        <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SentToScope</maml:name>
        <command:parameterValue required="True">All | InOrganization</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>UserCanOverride</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="Named">
      <maml:name>ApplyRightsProtectionTemplate</maml:name>
      <maml:description>
        <maml:para>The ApplyRightsProtectionTemplate parameter specifies the AD RMS template to apply to the message. An AD RMS template can be specified using the template name. Use the Get-RMSTemplate cmdlet to retrieve templates from your AD RMS server.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RmsTemplateIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>RmsTemplateIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="False" position="1">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies a name for the rule.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Enabled</maml:name>
      <maml:description>
        <maml:para>The Enabled parameter specifies whether the Outlook protection rules are enabled. New Outlook protection rules are enabled by default. To create a rule without enabling it, set the Enabled parameter to $false.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Force</maml:name>
      <maml:description>
        <maml:para>The Force switch specifies whether to suppress the confirmation prompt used to warn the administrator when rules are created without any conditions. Rules without any conditions specified apply to all messages. The Force switch doesn't require a value.</maml:para>
      </maml:description>
      <command:parameterValue required="True">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>FromDepartment</maml:name>
      <maml:description>
        <maml:para>The FromDepartment parameter specifies the sender's department as a condition. The user's department property is compared with the value specified.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String[]</command:parameterValue>
      <dev:type>
        <maml:name>String[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Organization</maml:name>
      <maml:description>
        <maml:para>The Organization parameter is reserved for internal Microsoft use.</maml:para>
      </maml:description>
      <command:parameterValue required="True">OrganizationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>OrganizationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Priority</maml:name>
      <maml:description>
        <maml:para>The Priority parameter specifies whether to set the order of processing of Outlook protection rules. Rules with a lower priority value are executed first.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Int32</command:parameterValue>
      <dev:type>
        <maml:name>Int32</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="True" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentTo</maml:name>
      <maml:description>
        <maml:para>The SentTo parameter specifies one or more recipients as a rule condition. The identity of recipients in the organization or the SMTP address of external recipients can be specified.</maml:para>
        <maml:para>The SentTo parameter doesn't accept wildcard characters. When multiple recipients are specified, messages sent to any of the specified recipients are considered a match.</maml:para>
      </maml:description>
      <command:parameterValue required="True">RecipientIdParameter[]</command:parameterValue>
      <dev:type>
        <maml:name>RecipientIdParameter[]</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SentToScope</maml:name>
      <maml:description>
        <maml:para>The SentToScope parameter specifies the message scope as a condition. You can use one of the following values:</maml:para>
        <command:list>bullet
        <command:listItem>
          <maml:para>InOrganization This value is for messages sent to recipients within the organization.</maml:para>
        </command:listItem>
        <command:listItem>
          <maml:para>All This value is for messages sent to all recipients.</maml:para>
        </command:listItem></command:list>
      </maml:description>
      <command:parameterValue required="True">All | InOrganization</command:parameterValue>
      <dev:type>
        <maml:name>All | InOrganization</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>UserCanOverride</maml:name>
      <maml:description>
        <maml:para>The UserCanOverride parameter specifies whether users can override actions taken by Outlook protection rules. By default, users can override actions taken by Outlook protection rules. When set to $false, the UserCanOverride parameter prevents the user from overriding the rule when sending the message.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example applies the AD RMS template Template-Contoso to messages sent to the SMTP address Joe@contoso.com.</maml:para>
        <maml:para />
        <maml:para>New-OutlookProtectionRule -Name "Project Contoso" -SentTo Joe@contoso.com -ApplyRightsProtectionTemplate "Template-Contoso"</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>Outlook protection rules are administrator-created rules applied before a user sends a message using Outlook. Outlook inspects message content and protects messages by applying Active Directory Rights Management Services (AD RMS) rights templates.</maml:para>
    <maml:para>For more information, see Outlook protection rules.</maml:para>
    <maml:para>Outlook protection rules created without a condition apply to all messages.</maml:para>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Information Rights Management (IRM) configuration" entry in the Messaging policy and compliance permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/fd1ca109-ff80-492a-8112-62b3e9218594(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command>fdbe9e1d-6e92-4ab7-9a77-88814c0eda68
<command:command xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddue="http://ddue.schemas.microsoft.com/authoring/2003/5" xmlns:msxsl="urn:schemas-microsoft-com:xslt">
  <command:details>
    <command:name>Set-MessageClassification</command:name>
    <maml:description>
      <maml:para>This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.</maml:para>
      <maml:para>Use the Set-MessageClassification cmdlet to configure an existing message classification instance in your organization.</maml:para>
    </maml:description>
    <maml:copyright>
      <maml:para />
    </maml:copyright>
    <command:verb>Set</command:verb>
    <command:noun>MessageClassification</command:noun>
    <dev:version />
  </command:details>
  <command:syntax>
    <command:syntaxItem>
      <maml:name>Set-MessageClassification</maml:name>
      <command:parameter required="True">
        <maml:name>Identity</maml:name>
        <command:parameterValue required="True">MessageClassificationIdParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>ClassificationID</maml:name>
        <command:parameterValue required="True">Guid</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Confirm</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisplayName</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DisplayPrecedence</maml:name>
        <command:parameterValue required="True">Highest | Higher | High | MediumHigh | Medium | MediumLow | Low | Lower | Lowest</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>DomainController</maml:name>
        <command:parameterValue required="True">Fqdn</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>Name</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>PermissionMenuVisible</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RecipientDescription</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>RetainClassificationEnabled</maml:name>
        <command:parameterValue required="True">$true | $false</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>SenderDescription</maml:name>
        <command:parameterValue required="True">String</command:parameterValue>
      </command:parameter>
      <command:parameter required="False">
        <maml:name>WhatIf</maml:name>
        <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      </command:parameter>
    </command:syntaxItem>
  </command:syntax>
  <command:parameters>
    <command:parameter required="True" variableLength="False" globbing="False" pipelineInput="True" position="1">
      <maml:name>Identity</maml:name>
      <maml:description>
        <maml:para>The Identity parameter specifies the name or GUID of the message classification you want to modify.</maml:para>
      </maml:description>
      <command:parameterValue required="True">MessageClassificationIdParameter</command:parameterValue>
      <dev:type>
        <maml:name>MessageClassificationIdParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>ClassificationID</maml:name>
      <maml:description>
        <maml:para>The ClassificationID parameter specifies the GUID of an existing message classification that you want to use in your Exchange organization. Use this parameter if you're configuring message classifications to span two Exchange forests in the same organization.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Guid</command:parameterValue>
      <dev:type>
        <maml:name>Guid</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Confirm</maml:name>
      <maml:description>
        <maml:para>The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplayName</maml:name>
      <maml:description>
        <maml:para>The DisplayName parameter specifies the display name for the message classification instance. The display name appears in the Microsoft Office and is used by Outlook users to select the appropriate message classification before they send a message.</maml:para>
        <maml:para>When you specify a name that includes spaces, you must enclose the name in quotation marks ("), for example, "Display Name". The DisplayName parameter can contain a maximum of 64 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DisplayPrecedence</maml:name>
      <maml:description>
        <maml:para>The DisplayPrecedence parameter specifies the relative precedence of the message classification to other message classifications that may be applied to a specified message. Although Outlook only lets a user specify a single classification for each message, transport rules may apply other classifications to a message. The classification with the highest precedence is shown first, and the subsequent classifications, which are those with lesser precedence as defined by this parameter, are appended in the appropriate order thereafter.</maml:para>
        <maml:para>Valid input for the DisplayPrecedence parameter is Highest, Higher, High, MediumHigh, Medium, MediumLow, Low, Lower, and Lowest.</maml:para>
        <maml:para>The default value is Medium.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Highest | Higher | High | MediumHigh | Medium | MediumLow | Low | Lower | Lowest</command:parameterValue>
      <dev:type>
        <maml:name>Highest | Higher | High | MediumHigh | Medium | MediumLow | Low | Lower | Lowest</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>DomainController</maml:name>
      <maml:description>
        <maml:para>This parameter is available only in on-premises Exchange 2013.</maml:para>
        <maml:para>The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.</maml:para>
        <maml:para>The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.</maml:para>
      </maml:description>
      <command:parameterValue required="True">Fqdn</command:parameterValue>
      <dev:type>
        <maml:name>Fqdn</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>Name</maml:name>
      <maml:description>
        <maml:para>The Name parameter specifies the administrative name for the message classification instance. The name is used to administer the message classification instance. When you specify a name that includes spaces, you must enclose the name in quotation marks ("), for example, "Administrative Name". The Name parameter can contain a maximum of 256 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>PermissionMenuVisible</maml:name>
      <maml:description>
        <maml:para>The PermissionMenuVisible parameter specifies whether the values that you entered for the DisplayName and RecipientDescription parameters are displayed in Outlook as the user composes a message.</maml:para>
        <maml:para>If you set the PermissionMenuVisible parameter to $false, users won't be able to assign this message classification to the messages they're composing. However, messages received with this message classification still display the classification information.</maml:para>
        <maml:para>The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RecipientDescription</maml:name>
      <maml:description>
        <maml:para>The RecipientDescription parameter specifies the purpose of the message classification to the recipient. The value of this parameter is shown to Outlook users when they receive a message that has this message classification. Enclose the value in quotation marks ("), for example, "This is the recipient description that explains how to treat the message that has been classified". The RecipientDescription parameter can contain a maximum of 1,024 characters.</maml:para>
        <maml:para>If you don't enter a value for this parameter, the description that you enter for SenderDescription is used.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>RetainClassificationEnabled</maml:name>
      <maml:description>
        <maml:para>The RetainClassificationEnabled parameter specifies whether the message classification should persist with the message if the message is forwarded or replied to.</maml:para>
        <maml:para>The default value is $true.</maml:para>
      </maml:description>
      <command:parameterValue required="True">$true | $false</command:parameterValue>
      <dev:type>
        <maml:name>$true | $false</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>SenderDescription</maml:name>
      <maml:description>
        <maml:para>The SenderDescription parameter specifies the purpose of the message classification to the sender. The value of this parameter is used by Outlook users to select the appropriate message classification before they send a message. Enclose the value in quotation marks ("), for example, "This is the sender description that explains when to use this message classification". The SenderDescription parameter can contain a maximum of 1,024 characters.</maml:para>
      </maml:description>
      <command:parameterValue required="True">String</command:parameterValue>
      <dev:type>
        <maml:name>String</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
    <command:parameter required="False" variableLength="False" globbing="False" pipelineInput="False" position="Named">
      <maml:name>WhatIf</maml:name>
      <maml:description>
        <maml:para>The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.</maml:para>
      </maml:description>
      <command:parameterValue required="False">SwitchParameter</command:parameterValue>
      <dev:type>
        <maml:name>SwitchParameter</maml:name>
        <maml:uri href="" />
      </dev:type>
      <dev:defaultValue></dev:defaultValue>
    </command:parameter>
  </command:parameters>
  <command:examples>
    <command:example>
      <maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
      <maml:introduction />
      <dev:code />
      <dev:remarks>
        <maml:para>This example makes the following configuration changes to the message classification named MyMessageClassification:</maml:para>
        <maml:para />
        <maml:para>Changes the display precedence to Low.</maml:para>
        <maml:para>Specifies that the message classification shouldn't persist with the message if the message is forwarded or replied to.</maml:para>
        <maml:para>Set-MessageClassification MyMessageClassification -DisplayPrecedence Low -RetainClassificationEnabled $false</maml:para>
      </dev:remarks>
      <command:commandLines>
        <command:commandLine>
          <command:commandText />
        </command:commandLine>
      </command:commandLines>
    </command:example>
  </command:examples>
  <maml:description>
    <maml:para>You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Message classifications" entry in the Mail flow permissions topic.</maml:para>
  </maml:description>
  <command:inputTypes>
    <command:inputType>
      <maml:description>
        <maml:para>To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.</maml:para>
      </maml:description>
    </command:inputType>
  </command:inputTypes>
  <command:returnValues>
    <command:returnValue>
      <maml:description>
        <maml:para>To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (http://go.microsoft.com/fwlink/p/?linkId=313798). If the Output Type field is blank, the cmdlet doesn't return data.</maml:para>
      </maml:description>
    </command:returnValue>
  </command:returnValues>
  <maml:relatedLinks>
    <maml:navigationLink>
      <maml:linkText>Online Version</maml:linkText>
      <maml:uri>http://technet.microsoft.com/EN-US/library/fdbe9e1d-6e92-4ab7-9a77-88814c0eda68(EXCHG.150).aspx</maml:uri>
    </maml:navigationLink>
  </maml:relatedLinks>
</command:command></HelpItems>
