**************************************************************************** - Version: 1.0.4 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 8/27/2019 - Released By: Leo YL Chen - SWB#: 8CHVP (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.2 RC2 for Family 17h * ABL Firmware Version: RABLSSP10022011 * PSP Firmware Version: 00.0C.00.6F * SMU Firmware Version: 36.79.0 * DXIO Firmware Version : 36.614 * uCode : A0-08300027/B0-08301025 * S150 Firmware Version: 6.0.0.0011 * iDRAC-HII Sirius X11 (SWB# 133DR X11) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. 8. The SMU MCE defect has been fixed in this release 0.4.9. But user may still see MCE message in the 1st boot after BIOS update. It's an expected behavior and please don't create ticket for it. 9. The previous wrong CPU core number reporting has been fixed in 0.4.9 release. "A replacement part was detected for CPU device" in LC log is expected when update to BIOS 0.4.9. 10.LS 1S All-Points Bulletin (APB) #28 - CPU fused feature enabled in Alar/Jalpa BIOS 0.4.11 -Once updated to BIOS 0.4.11, Alar/Jalpa system will not be able to downgrade to older BIOS. -If the CPU is fused, system cannot boot with older BIOS which does not support fusing. The system will lock with no video. The POST code in SPIVIEW card is 0x22. 11.LS All-Points Bulletin (APB) #33 NVME hot-plug and hot-remove Non-fatal PCIe error During NVMe hot plug operations with X-Rev BIOS images the following PCIe corrected errors may be frequently observed in the SEL where they are reported as non-fatal PCIe errors. AER CORERRSTS.Bit[0] Receiver Error Status AER CORERRSTS.Bit[6] Bad TLP Status AER CORERRSTS.Bit[7] Bad DLLP Status Please note these errors will not be logged in A-rev candidate and A-Rev BIOS releases where PCIe correctable error reporting is disabled so this behavior is not customer facing. Also these errors are automatically corrected by hardware regardless of X-Rev or A-Rev BIOS release. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-146566 Post Package Repair (PPR) not functional ------------------------ SHA-1: 399c5cd656e574a6d627e1df21bd11a24e5edfb2 [ESGB-886] Rome RAS: Dell AMD PPR Support Enable PPR support for all ROMR platforms SHA-1: bc3c650d1c3b1ff55ea37a9e2ab9322b39264266 [JIT-142635]Update attribute values for Efficiency Optimized Mode and Preferred IO device. SHA-1: 0f8f3915d3fe95a5f2d0c0f72e9c67bbb2923bb3 [JIT-142635]Update help strings Bus Device Function under Preferred IO device. SHA-1: 327b55b8e2bcab91d8004e36f96f42c581cb8a40 [JIT-142635]Update help strings for Efficiency Optimized Mode and Preferred IO device. **************************************************************************** - Version: 1.0.3 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 8/23/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.2 RC2 for Family 17h * ABL Firmware Version: RABLSSP10022011 * PSP Firmware Version: 00.0C.00.6F * SMU Firmware Version: 36.79.0 * DXIO Firmware Version : 36.614 * uCode : A0-08300027/B0-08301025 * S150 Firmware Version: 6.0.0.0011 * iDRAC-HII Sirius X11 (SWB# 133DR X11) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. 8. The SMU MCE defect has been fixed in this release 0.4.9. But user may still see MCE message in the 1st boot after BIOS update. It's an expected behavior and please don't create ticket for it. 9. The previous wrong CPU core number reporting has been fixed in 0.4.9 release. "A replacement part was detected for CPU device" in LC log is expected when update to BIOS 0.4.9. 10.LS 1S All-Points Bulletin (APB) #28 - CPU fused feature enabled in Alar/Jalpa BIOS 0.4.11 -Once updated to BIOS 0.4.11, Alar/Jalpa system will not be able to downgrade to older BIOS. -If the CPU is fused, system cannot boot with older BIOS which does not support fusing. The system will lock with no video. The POST code in SPIVIEW card is 0x22. 11.LS All-Points Bulletin (APB) #33 NVME hot-plug and hot-remove Non-fatal PCIe error During NVMe hot plug operations with X-Rev BIOS images the following PCIe corrected errors may be frequently observed in the SEL where they are reported as non-fatal PCIe errors. AER CORERRSTS.Bit[0] Receiver Error Status AER CORERRSTS.Bit[6] Bad TLP Status AER CORERRSTS.Bit[7] Bad DLLP Status Please note these errors will not be logged in A-rev candidate and A-Rev BIOS releases where PCIe correctable error reporting is disabled so this behavior is not customer facing. Also these errors are automatically corrected by hardware regardless of X-Rev or A-Rev BIOS release. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-142635 (CR) Add Preferred-IO option to AMD Rome BIOS ------------------------ SHA-1: b942ace300b7ebbb6327c384e0cbc7ec7213795b [JIT-142635] HII fix for Efficiency Optimized Mode and Bug fix for Preferred IO device. SHA-1: 79611dee3821fe9e902a432eb42c0b071226e373 [JIT-142635] Move Efficiency Optimized Mode from Debug Menu to Performance profiles. SHA-1: 5cf1a1a851998d92068122fe67634559d17be4a9 [JIT-142635] Move Preferred IO Device from Debug Menu to Integrated Devices menu. SHA-1: ec72b727c96d8857689bff79b6dff9af66e61ecb [ESGB-886] Rome RAS IIO error handler SMM latency reduction SHA-1: b1feeb4091c7a5bd16a9d8f65c2707216cee3399 [ESGB-886] Rome RAS PCI error handler > Serial debug enhancements from unit testing logs **************************************************************************** - Version: 1.0.2 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 8/21/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.2 RC2 for Family 17h * ABL Firmware Version: RABLSSP10022011 * PSP Firmware Version: 00.0C.00.6F * SMU Firmware Version: 36.79.0 * DXIO Firmware Version : 36.614 * uCode : A0-08300027/B0-08301025 * S150 Firmware Version: 6.0.0.0011 * iDRAC-HII Sirius X11 (SWB# 133DR X11) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. 8. The SMU MCE defect has been fixed in this release 0.4.9. But user may still see MCE message in the 1st boot after BIOS update. It's an expected behavior and please don't create ticket for it. 9. The previous wrong CPU core number reporting has been fixed in 0.4.9 release. "A replacement part was detected for CPU device" in LC log is expected when update to BIOS 0.4.9. 10.LS 1S All-Points Bulletin (APB) #28 - CPU fused feature enabled in Alar/Jalpa BIOS 0.4.11 -Once updated to BIOS 0.4.11, Alar/Jalpa system will not be able to downgrade to older BIOS. -If the CPU is fused, system cannot boot with older BIOS which does not support fusing. The system will lock with no video. The POST code in SPIVIEW card is 0x22. 11.LS All-Points Bulletin (APB) #33 NVME hot-plug and hot-remove Non-fatal PCIe error During NVMe hot plug operations with X-Rev BIOS images the following PCIe corrected errors may be frequently observed in the SEL where they are reported as non-fatal PCIe errors. AER CORERRSTS.Bit[0] Receiver Error Status AER CORERRSTS.Bit[6] Bad TLP Status AER CORERRSTS.Bit[7] Bad DLLP Status Please note these errors will not be logged in A-rev candidate and A-Rev BIOS releases where PCIe correctable error reporting is disabled so this behavior is not customer facing. Also these errors are automatically corrected by hardware regardless of X-Rev or A-Rev BIOS release. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-145943 Attribute L1 ,L2 Stream Hw Prefetcher & L2SteramHwPrefetc has typo in attribute name ------------------------ SHA-1: e4682c34469bd8861486b70bb37eea8d8759c29c ESGB-1848 : Integrate iDRAC HII driver - iDRAC-HII Sirius X11 (SWB# 133DR X11) JIT-143734 - Latest CSSD library needs to be incorporated into HII - iDRAC-HII CSSD library Integration - CSSD 7.0 BLD 0008 release + Updated iDRAC-HII release version to 4.00.00.12 JIT-131206 - L10n Translations Integration SHA-1: 0b928a6c15e6795dedcb842efe1b9c77184f721b JIT-145943 Attribute L1 ,L2 Stream Hw Prefetcher & L2SteramHwPrefetc has typo in attribute name. **************************************************************************** - Version: 1.0.1 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 8/19/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.2 RC2 for Family 17h * ABL Firmware Version: RABLSSP10022011 * PSP Firmware Version: 00.0C.00.6F * SMU Firmware Version: 36.79.0 * DXIO Firmware Version : 36.614 * uCode : A0-08300027/B0-08301025 * S150 Firmware Version: 6.0.0.0011 * iDRAC-HII Sirius X10 (SWB# 133DR X10) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. 8. The SMU MCE defect has been fixed in this release 0.4.9. But user may still see MCE message in the 1st boot after BIOS update. It's an expected behavior and please don't create ticket for it. 9. The previous wrong CPU core number reporting has been fixed in 0.4.9 release. "A replacement part was detected for CPU device" in LC log is expected when update to BIOS 0.4.9. 10.LS 1S All-Points Bulletin (APB) #28 - CPU fused feature enabled in Alar/Jalpa BIOS 0.4.11 -Once updated to BIOS 0.4.11, Alar/Jalpa system will not be able to downgrade to older BIOS. -If the CPU is fused, system cannot boot with older BIOS which does not support fusing. The system will lock with no video. The POST code in SPIVIEW card is 0x22. 11.LS All-Points Bulletin (APB) #33 NVME hot-plug and hot-remove Non-fatal PCIe error During NVMe hot plug operations with X-Rev BIOS images the following PCIe corrected errors may be frequently observed in the SEL where they are reported as non-fatal PCIe errors. AER CORERRSTS.Bit[0] Receiver Error Status AER CORERRSTS.Bit[6] Bad TLP Status AER CORERRSTS.Bit[7] Bad DLLP Status Please note these errors will not be logged in A-rev candidate and A-Rev BIOS releases where PCIe correctable error reporting is disabled so this behavior is not customer facing. Also these errors are automatically corrected by hardware regardless of X-Rev or A-Rev BIOS release. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-145792 BIB passes Incorrect CPUID to iDRAC ------------------------ SHA-1: fd39e72a1b213bd2c514181137048d596b9c4715 [ESGB-1316]Update error messages for MSG_WARN_REQUESTED_NPS_NON_PREFERRED_MEM_INTLV with feedback from memory team. SHA-1: 550f15de1b24237ea8bcac9c76879a6c3cc98aa9 [JIT-145792] - BIB passes Incorrect CPUID to iDRAC SHA-1: 507db6f61f8f3cc9b7c1e03b64c1fc63cdf3431e [ESGB-886] Rome RAS PCI error handler > Modify SMI storm detection logic to categorize StopCountExceeded/SMI storm > We now count all PCI errors on a device level instead of full PFA level > This is because several Intel and Mellanox adapters throw corrected errors on all functions of multi-function devices > This change prevents error handler from flooding SEL with numerous, duplicative entries. SHA-1: 903261e645adb0c7f473d316cf50a109f3472dc7 [ESGB-886] Rome RAS PCIe error handler > Resolve issues with RAS_GLOBAL_STATUS SMN register address calculation identified by Smith SHA-1: 4d8feba22b5e327333ff32dbcf5ae728bc7e6a01 [JIT-136329] OM931:OMSS:C4Jalpa: S150:WIndows:Os crash observed when NVME disk is removed > Additional changes required for RHEL 8.0 SMI storm > We are partially reverting changes for revision: 94d0361d5032d30f9fc3a58dc62091526f0f36a4 dated 5/9/2019 > These code changes were done for JIT-129312 [Alar/Jalpa] Trigger the NBIO error 2/3 fail > NBIO 2 & 3 errors are not signaled correctly in RAS_GLOBAL_STATUS_HI therefore we had w/a to always perform NBIO & NBIF error scanning on these NBIO units. > This appears to create additional latency and compound the RHEL 8.0 SMI storm issue > RHEL 8.0 SMI storm is blocking shipment whereas JIT-129312 fix is corner case we are backing out these changes SHA-1: 052e053e4b4c975a30820a5cacf22d1eb51307a5 [JIT-144419] - ROADSTER-EST-PASS1: Empty SLOTS are getting displayed in Bios Integrated Device page even unhide option is Disabled This setup option was implemented for Intel Systems only due to one customer request. The behavior of this setup option is to allow the user unhide the RootPorts of Empty Slots and not to unhide/hide Empty Slots **************************************************************************** - Version: 1.0.0 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 8/16/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.2 RC2 for Family 17h * ABL Firmware Version: RABLSSP10022011 * PSP Firmware Version: 00.0C.00.6F * SMU Firmware Version: 36.79.0 * DXIO Firmware Version : 36.614 * uCode : A0-08300027/B0-08301025 * S150 Firmware Version: 6.0.0.0011 * iDRAC-HII Sirius X10 (SWB# 133DR X10) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. 8. The SMU MCE defect has been fixed in this release 0.4.9. But user may still see MCE message in the 1st boot after BIOS update. It's an expected behavior and please don't create ticket for it. 9. The previous wrong CPU core number reporting has been fixed in 0.4.9 release. "A replacement part was detected for CPU device" in LC log is expected when update to BIOS 0.4.9. 10.LS 1S All-Points Bulletin (APB) #28 - CPU fused feature enabled in Alar/Jalpa BIOS 0.4.11 -Once updated to BIOS 0.4.11, Alar/Jalpa system will not be able to downgrade to older BIOS. -If the CPU is fused, system cannot boot with older BIOS which does not support fusing. The system will lock with no video. The POST code in SPIVIEW card is 0x22. 11.LS All-Points Bulletin (APB) #33 NVME hot-plug and hot-remove Non-fatal PCIe error During NVMe hot plug operations with X-Rev BIOS images the following PCIe corrected errors may be frequently observed in the SEL where they are reported as non-fatal PCIe errors. AER CORERRSTS.Bit[0] Receiver Error Status AER CORERRSTS.Bit[6] Bad TLP Status AER CORERRSTS.Bit[7] Bad DLLP Status Please note these errors will not be logged in A-rev candidate and A-Rev BIOS releases where PCIe correctable error reporting is disabled so this behavior is not customer facing. Also these errors are automatically corrected by hardware regardless of X-Rev or A-Rev BIOS release. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Disable Debug Menu and Embedded Shell 2. Fix [JIT-145516] [Alar/Jalpa] BIOS 0.4.14 install legacy OS very slowly in BIOS mode ------------------------ SHA-1: 95202b72ef0cb5da03ed52c99e5967461ca03a11 [ESGB-1154] PCIe deassert GPIO 26 after CPLD bit 17.6 and 17.5 for future update to CPLD - GPIO 26 to deassert BMC video and LOM - CPLD bit 17.6 and 17.5 to deassert SHA-1: fab7ba35ad4c8df70a9967d80d7845353ab3c986 [ESGB-992] Alar/Jalpa. Disable Debug Menu and Embedded Shell SHA-1: 87b773b07ec43851b2bcab8437485fac9120bb14 *[ESGB-1320] update SWRAID S150 6.0.0.0011 SHA-1: 76e7028fb6fc101294869072c8367e956badcc94 JIT-145024 After flashing to a newer BIOS (usually pre-MLK to MLK, but could be other combinations), on some reboot the BIOS loads default settings. It could be the next reboot after the new BIOS has booted for the first time, or it could be on subsequent boots. SHA-1: 11cb3d1f61369e349efa0c0d967082bc0f4d5464 [ESGB-1154] PCIe deassert GPIO 26 and CPLD bit 17.6 for future update to CPLD - GPIO 26 to deassert BMC video and LOM - CPLD bit 17.6 to deassert all other PCIe lanes SHA-1: 8c05d89ca73ab41850df6106ed052afc725f5214 [ESGB-1316]Update error messages for MSG_WARN_REQUESTED_NPS_NON_PREFERRED_MEM_INTLV to informational type message. It will no longer cause halt at F1/F2 SHA-1: 36538d5102dde19d286853751a187ab1c470f111 [JIT-145516] [Alar/Jalpa] BIOS 0.4.14 install legacy OS very slowly in BIOS mode > Fix default value of NbifErrorFound SHA-1: 759226b3d61bc1ab2d82125191bf682636f2150b [JIT-113367] Add PERC H345/HBA345 to the list of mListOfPercCards[]. SHA-1: f5752e573df697ef0fe374e68dcd19b031f08ce6 [ESGB-886] Streamline DellElogPciLib correctable error enabling logic > Remove dependency on obsolete CORRECTABLE_ERRORS_ENABLE NVRAM variable SHA-1: b43d3225ea83a9bd78289684e539f94ee9a3a3da JIT-139271: [IDRAC][Server Configuration Profile]: Unable to Import Cloned server configuration file with IscsiDev1Con1TargetName as ME array iSCSI Target IQNIQN: iqn.1988-11.com.dell:01.array.bc305bf056fe will fail in original BIOS SHA-1: 5d35b72ac019d2ac7c28b9056a2252ea6a1ac8e6 [ESGB-886] Implement L1/L2 Stream Hw prefetcher function 1. Add two attributes for L1/L2 stream hw prefetcher and link the attributes to two PCDs "PcdAmdL1StreamPrefetcher" and "PcdAmdL2StreamPrefetcher" 2. Hidden HW/SW prefetcher attribute and remove the link between the attributes and two PCDs "PcdAmdHardwarePrefetchMode" and "PcdAmdSoftwarePrefetchMode" **************************************************************************** - Version: 0.4.14 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 8/14/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.2 RC2 for Family 17h * ABL Firmware Version: RABLSSP10022011 * PSP Firmware Version: 00.0C.00.6F * SMU Firmware Version: 36.79.0 * DXIO Firmware Version : 36.614 * uCode : A0-08300027/B0-08301025 * S150 Firmware Version: 6.0.0.0010 * iDRAC-HII Sirius X10 (SWB# 133DR X10) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. 8. The SMU MCE defect has been fixed in this release 0.4.9. But user may still see MCE message in the 1st boot after BIOS update. It's an expected behavior and please don't create ticket for it. 9. The previous wrong CPU core number reporting has been fixed in 0.4.9 release. "A replacement part was detected for CPU device" in LC log is expected when update to BIOS 0.4.9. 10.LS 1S All-Points Bulletin (APB) #28 - CPU fused feature enabled in Alar/Jalpa BIOS 0.4.11 -Once updated to BIOS 0.4.11, Alar/Jalpa system will not be able to downgrade to older BIOS. -If the CPU is fused, system cannot boot with older BIOS which does not support fusing. The system will lock with no video. The POST code in SPIVIEW card is 0x22. 11.LS All-Points Bulletin (APB) #33 NVME hot-plug and hot-remove Non-fatal PCIe error During NVMe hot plug operations with X-Rev BIOS images the following PCIe corrected errors may be frequently observed in the SEL where they are reported as non-fatal PCIe errors. AER CORERRSTS.Bit[0] Receiver Error Status AER CORERRSTS.Bit[6] Bad TLP Status AER CORERRSTS.Bit[7] Bad DLLP Status Please note these errors will not be logged in A-rev candidate and A-Rev BIOS releases where PCIe correctable error reporting is disabled so this behavior is not customer facing. Also these errors are automatically corrected by hardware regardless of X-Rev or A-Rev BIOS release. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ JIT-145516 [Alar/Jalpa] BIOS 0.4.14 install legacy OS very slowly in BIOS mode ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Set x2APIC Mode default value to enabled. 2. Fix JIT-144585 R7515-EST-PASS3: Observing incorrect(42) slot number showing for PCIe fatal error 3. Fix JIT-141632 Observing Number of CCDs per Processor and Number of Cores per CCD showing incorrectly for AMD 7320P 16 Core CPU 4. Fix JIT-136329 OM931:OMSS:C4Jalpa: S150:WIndows:Os crash observed when NVME disk is removed 5. Fix JIT-144203 R7515-EST-PASS2: Observed BSOD along with fatal error on R7515 WIN 2019 OS after NVME drive insertion 6. Fix JIT-140469 R7515-EST: Observing S150 NVME Drive state showing as removed instead of ready in R7515 OMSS S150 Physical disks page after hotplug 7. Fix JIT-141634 R6515-PASS2-EST:- 1. For a 8 Core processor unsupported CCD's and CCX shown. 8. Fix JIT-144400 [Jalpa] AMD 24 Core CPU CCDs setting not follow SPEC definition. 9. Fix JIT-135674 "Debug Capability Test (Logo)" test failed in Windows HLK Certification for Broadcom 5720 (Alar/Jalpa) 10.Update Code Base to version SHA-1: 761df242e23e509fc9ae16a064f88e414a8c044c ------------------------ SHA-1: 761df242e23e509fc9ae16a064f88e414a8c044c [ESGB-886] change the help text for L1 Stream HW prefetcher and L2 Stream HW prefetcher SHA-1: b9439d332019ee1c16eee711221706a2dfab3963 [JIT-144965] Help message is not correspond to the item in "Number of Cores per CCD" SHA-1: 5be5749737d11d13210bc965a29331a146c93533 [ESGB-886] Revert incomplete changes for Memory Threshold Mode Debug menu changes SHA-1: 0b0582d9b0453db0d5dece29397eea6ab3a2eede [JIT-136329] OM931:OMSS:C4Jalpa: S150:WIndows:Os crash observed when NVME disk is removed SHA-1: 3491d73be9e27d1e8ca3bcb6af47b96a038b2ca3 [JIT-135674] "Debug Capability Test (Logo)" test failed in Windows HLK Certification for Broadcom 5720 (Alar/Jalpa) SHA-1: 371f3a7f1204a3b4da266b239b7bb42d42be5827 [ESGB-674] ACPI Development [Enhancement] Install Dell ACPI NVS with default value even NV attribute or corresponding protocol/function not available as error fallback. SHA-1: 2d89b361ef3086ba5b0e6a377421b02988a2c460 [ESGB-1205] [15G] Setup Browser Enhancement. - Modify the Enable/Disable to Enabled/Disabled in CCX as NUMA Domain. SHA-1: 88607d5164f2abfe506baa17c049dc3a24a17703 [JIT-141632] bugfix for downcore display SHA-1: 49f4db545286c77257400315c9180d3097b44caa [ESGB-992] Alar/Jalpa BIOS development Fix build error when DEBUG_MENU_ENABLE = FALSE SHA-1: 62eac831e9d3e75559cbd0c7edc7d8fe724236bb [JIT-144124] HPC Workload Profile Implementation for 1S. Code change: Hide useless workload profile settings. SHA-1: 1c34ceeccf0307bffbeefd7e87fc27b514b55cab [ESGB-886] Implement L1/L2 Stream Hw prefetcher function 1. Add two attributes for L1/L2 stream hw prefetcher and link the attributes to two PCDs "PcdAmdL1StreamPrefetcher" and "PcdAmdL2StreamPrefetcher" 2. Hidden HW/SW prefetcher attribute and remove the link between the attributes and two PCDs "PcdAmdHardwarePrefetchMode" and "PcdAmdSoftwarePrefetchMode" SHA-1: fae89b8a2b55d7e06904bb661881e03279bf0664 [ESGB-992] Alar/Jalpa. Change the version number to 0.4.14 SHA-1: 9e01b7d07a9c13eb355b233f55f88aed1581b768 [ESGB-992] Alar/Jalpa. set x2APIC default to enable SHA-1: 64a0775960e3200b790a25196d010e87cd471826 [JIT-144585] R7515-EST-PASS3: Observing incorrect(42) slot number showing for PCIe fatal error SHA-1: 904627dcf06a2f451eb10aa206c800c80b6d7ff3 [JIT-141632] bugfix for Observing Number of CCDs per Processor and Number of Cores per CCD showing incorrectly for AMD 7320P 16 Core CPU SHA-1: 34dcadfa25f9adb34d5c30089ce70aab726ae869 [JIT-136329] OM931:OMSS:C4Jalpa: S150:WIndows:Os crash observed when NVME disk is removed. SHA-1: d1e0f0420e801cb925fda98a1344c009d55328a3 [ESGB-886] Implement L1/L2 Stream Hw prefetcher function 1. Add two attributes for L1/L2 stream hw prefetcher and link the attributes to two PCDs "PcdAmdL1StreamPrefetcher" and "PcdAmdL2StreamPrefetcher" 2. Hidden HW/SW prefetcher attribute and remove the link between the attributes and two PCDs "PcdAmdHardwarePrefetchMode" and "PcdAmdSoftwarePrefetchMode" SHA-1: 668454c572c2de894124ab4fdc064ddd1c4a689a [ESGB-854] Security - SEV. Correct code to map SEV entry (type 0x38) to PSP SEV reserved region in data ROM SHA-1: c9867797d34f3ce1249c3e89f48f9e316695daf2 [ESGB-886] for manufactory, disable both x2APIC and logical processor and store the information in NVRAM. **************************************************************************** - Version: 0.4.13 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 8/8/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.2 RC2 for Family 17h * ABL Firmware Version: RABLSSP10022011 * PSP Firmware Version: 00.0C.00.6F * SMU Firmware Version: 36.79.0 * DXIO Firmware Version : 36.614 * uCode : A0-08300027/B0-08301025 * S150 Firmware Version: 6.0.0.0010 * iDRAC-HII Sirius X10 (SWB# 133DR X10) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. 8. The SMU MCE defect has been fixed in this release 0.4.9. But user may still see MCE message in the 1st boot after BIOS update. It's an expected behavior and please don't create ticket for it. 9. The previous wrong CPU core number reporting has been fixed in 0.4.9 release. "A replacement part was detected for CPU device" in LC log is expected when update to BIOS 0.4.9. 10.LS 1S All-Points Bulletin (APB) #28 - CPU fused feature enabled in Alar/Jalpa BIOS 0.4.11 -Once updated to BIOS 0.4.11, Alar/Jalpa system will not be able to downgrade to older BIOS. -If the CPU is fused, system cannot boot with older BIOS which does not support fusing. The system will lock with no video. The POST code in SPIVIEW card is 0x22. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-144031 Alar/Jalpa IDSDM FW flash failed error from 1.7 to 1.9, and manually flash still not work 2. Fix JIT-141772 CCX as NUMA Domain disabled (default BIOS setting): Throughput getting around 50% - 70% when we perform Bi-directional stress on both ports of Solarflare card 3. Fix JIT-144289 4.12 BIOS system performance grinds to a halt 4. Fix JIT-144497(CR) [Alar/Jalpa] PCIe bridge instance number change request 5. Fix JIT-144647 [Jalpa] System post error message after set Bios to default with Bios 0.4.12 6. Fix JIT-144124(CR) HPC Workload Profile Implementation 7. Fix JIT-141570 Alar] [Windows][Intel] Low performance seen on Harbor channel 8. Fix JIT-144796 R6515/R7515 ST Pass 3 : Observing Alar system hang at POST after reboot initiated from NVME Drive Firmware Update 9. Fix JIT-141518 R7515-EST-PASS2:- Observing System Hang at "Loading Bios Drivers" page in 0.4.7 Bios build. 10. Fix JIT-141520 R7515-EST-PASS2: Observing system is stopping at loading Bios drivers page at post 11. Fix JIT-144359 [Alar/Jalpa] Post halt on "loading BIOS driver" when using 64 core CPU(DPN:YVKJ6) on BIOS 0.4.9 12. Update Code Base to version SHA-1: e9f0a79703f4c050698246b97d6357161787c3b0 ------------------------ SHA-1: e9f0a79703f4c050698246b97d6357161787c3b0 [ESGB-886] Implement L1/L2 Stream Hw prefetcher function 1. Add two attributes for L1/L2 stream hw prefetcher and link the attributes to two PCDs "PcdAmdL1StreamPrefetcher" and "PcdAmdL2StreamPrefetcher" 2. Hidden HW/SW prefetcher attribute and remove the link between the attributes and two PCDs "PcdAmdHardwarePrefetchMode" and "PcdAmdSoftwarePrefetchMode" SHA-1: 852a1cec8a39c3af9385b1b9c4189bbf24152541 [JIT-139926] [R&S] System hang at POST Loading BIOS Drivers during cycling. add 100ms delay SHA-1: edae02ba6bd57c5cf92afbcf4b8cd3390bd63d19 [ESGB-1705] Fix high impact outstanding items from static code analysis - Memory corruption in HIIMngt.cpp - Resource leaks in png.cpp - Memory illegal access in HiiFormDisplay.c and HiiIfr.c SHA-1: 9a7cb1d050c38c177cb9b9fb263e11ca5aae4761 JIT-144647 [Jalpa] System post error message after set Bios to default with Bios 0.4.12 SHA-1: a0b73914284531337b46a4d26fa26372f3c80417 [ESGB-886] in manufactory mode, set x2APIC to disabled and do not make a warm reboot SHA-1: 96b6fc33216e20165d9ffdf89538c59d90631bfb [ESGB-829] Adding debug menu options Pcie preferred IO device option Part 2 - Setting PcdAmdPreferredIOBus along with PcdAmdPreferredIODevice in ApplyPciePreferredIoDevice() SHA-1: 834daf84a8001c8dd59b05845de123c75d2a2979 ESGB-1807 Add Dell BIOS setup option (under Processor Settings) for L2RfoPrefetchDisable knob. SHA-1: 0c1e9b07ebee40f9b6e858c9ac2104f3734c3746 [JIT-141321] HBA330 cannot detected HDD during installation Ubuntu 18.04.2 with Legacy mode Register callback when all the architectural protocols are ready before calling the FabricResourceReportToGcd. SHA-1: ece52d86aa82cd17f46ea7319e1a02f55f8f3892 [JIT-141321] HBA330 cannot detected HDD during installation Ubuntu 18.04.2 with Legacy mode Add more debug messages to detect when SetMemoryAttributes fails. SHA-1: fd09d0a20009705d9493dd7c755cb2da8d5a553c [ESGB-829] Adding debug menu options for Efficiency Optimized Mode(PcdEfficiencyOptimizedMode) SHA-1: 68a2aec22e8386bdd872445570336df617850a60 [JIT-140582] Workaround for SMU that causes hang during Loading BIOS Drivers. -Adding delay in CallbackAfterCcxDxeDone() after SMU service request update. SHA-1: d2ea42dc44381b5dd8156253043d177856aad2df [JIT-144031] Alar/Jalpa IDSDM FW flash failed error from 1.7 to 1.9, and manually flash still not work Code change: Set the PCD "PcdFchFullHardReset" to TRUE. It means system will do full hard reset when receiving a cold reset request. SHA-1: 50e5712e3207d7ac20221810c0344c973ff33b5d [JIT-144124] HPC Workload Profile Implementation for 1S. Follow the newest 1S HPC document to implement HPC table. SHA-1: 6e409a13a01ef2cbf27e2003c95ad00a9f270a1c [JIT-134035] Fixed NVMe Direct Connect RootPort Max Payload Size not set to 256. SHA-1: 5a02cd4631d083508e7a8fb948f55427e129a407 [JIT-144497] PCIe bridge instance number change request. Corrected FQDD of P2PBridge contained NULL locatoror field. SHA-1: 696dae9e0474a14eb974ecde3ca1d48819327269 [JIT-138254] R7515-EST: Observing incorrect(35) slot number showing for non-fatal PCIe error > Additional serial debug in DellSmmElogPostProcessErrorRecordPcie SHA-1: d4946d3c69a93a5185c1ae519cde8413a7213568 [ESGB-674] ACPI Development. Improve AMD AGESA protocol parameter error handling to fix RSOD issue. SHA-1: 79eb556470ffe553ad4eafc39fce46f51910921d ESGB-1611 : Integrate iDRAC HII driver - iDRAC-HII Sirius X10 (SWB# 133DR X10) JIT-143734 - Latest CSSD library needs to be incorporated into HII - iDRAC-HII CSSD library Integration - CSSD 7.0 BLD 0007 release. SHA-1: ebfc2f9f127ed982c1eb649f1c2c35c46c7a3d42 [JIT-144090] R7515-EST-PASS2: Observed non-fatal PCIe error detected on a component at bus 130 device 13 function 0 warning log on R7515 after NVME drive removal > Move PCI device status clearing from preprocessing flow until after post-processing completed SHA-1: 9d178c36479e37d882542eafbad2059edd73ef64 [ESGB-1316]Update error messages for MSG_WARN_REQUESTED_NPS_NON_PREFERRED_MEM_INTLV and MSG_WARN_REQUESTED_NPS_PROFILE_FAILURE SHA-1: f1854c679757e2989a380231c792b8e4c4884877 [ESGB-674] ACPI Development. ACPI _PXM method for AMD NPSx and CCX as NUMA support SHA-1: 92c8df53e1d8e41554c2309089453d04b869f692 [ESGB-674] ACPI Development. ACPI _PXM method for AMD NPSx and CCX as NUMA support SHA-1: e6699133513b79d649bb8eba7868c6b6f5c6eaa9 [JIT-143951][15G MC] Load default issue --- An error occurred when saving changes SHA-1: a374f34f73508a6f8478c05ba9d895e0214d259a [ESGB-1316] Add error message for Memory interleave downgrade for requested NPS profile SHA-1: 468be1305b8214b0b3b949f8c7b85c18118873c5 [ESGB-886]in ROME platform, tie X2APIC with IOMMU SHA-1: 5273ec4b766a9c44f3e0231e9e3b0bd29973c997 [ESGB-886] In manufactory mode, force x2apic for disabled mode for windows PE boot **************************************************************************** - Version: 0.4.12 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 8/1/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.2 RC2 for Family 17h * ABL Firmware Version: RABLSSP10022011 * PSP Firmware Version: 00.0C.00.6F * SMU Firmware Version: 36.79.0 * DXIO Firmware Version : 36.614 * uCode : A0-08300027/B0-08301025 * S150 Firmware Version: 6.0.0.0010 * iDRAC-HII Sirius X09 (SWB# 133DR X09) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. 8. The SMU MCE defect has been fixed in this release 0.4.9. But user may still see MCE message in the 1st boot after BIOS update. It's an expected behavior and please don't create ticket for it. 9. The previous wrong CPU core number reporting has been fixed in 0.4.9 release. "A replacement part was detected for CPU device" in LC log is expected when update to BIOS 0.4.9. 10.LS 1S All-Points Bulletin (APB) #28 - CPU fused feature enabled in Alar/Jalpa BIOS 0.4.11 -Once updated to BIOS 0.4.11, Alar/Jalpa system will not be able to downgrade to older BIOS. -If the CPU is fused, system cannot boot with older BIOS which does not support fusing. The system will lock with no video. The POST code in SPIVIEW card is 0x22. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-143380 R7515-EST: Observing USBXHCI.Embedded is not showing in R7515 and Its showing R7415 2. Fix JIT-141321 [Jalpa] HBA330 cannot detected HDD during installation Ubuntu 18.04.2 with Legacy mode 3. Fix JIT-141618 R7515-EST-PASS2: Observed UEFI0077 one or more PCIe device errors occurred same logs 2 times at POST 4. Update Code Base to version SHA-1: a559f4f9c1ef22ab0b623c807204fa4a8e7e642c ------------------------ SHA-1: a559f4f9c1ef22ab0b623c807204fa4a8e7e642c * [ESGB-992] Alar/Jalpa. Change the version number to 91.4.12 SHA-1: 231dbabce7c35edc0ad9c8299b9890899e8bb9a5 * [JIT-136916] OMSA: PCIe SSD information is enumerated in slots page. -Used correct type definition of PCIe Gen3 for SSD. -Code clean-up to avoid directly hard-code to follow industry standard of EDK-II SHA-1: 96272528a60a43d52b2a42a5c58b407e707f54cc * [ESGB-1102] AGESA 1002 RC2 Integration PART 1.1 SHA-1: f814c39c1e5683d340c7c83fac76e6e1af5fe02f * [ESGB-1102] AGESA 1002 RC2 Integration PART 1 SHA-1: 035677d2a1dfb43565ca2a960a6643dcca2950aa * [JIT-143261] Remove IOMMU for Intel builds/disabling WDT by default SHA-1: 40720ec5720226192f22ea2802f9bf3783216051 * ESGB-23 iDRAC BIB: Send CPU Info via 14G TLV format. SHA-1: 41abc2a4963e92bfbeddc250c83df95f090e10cc * [ESGB-994] DIMM SPD logging - unit testing bug fixes. > Fix bugs and add serial debug instrumentation to code that calculates ECC error count delta SHA-1: 326ebea4651a2cf90a63bac2fb8cdfd69b896a46 [ESGB-1139] Cordoba: Move bay and slot enumeration in core stitcher to backplane config logic. SHA-1: 87ec505d1d04c59c5b2ef626c1a742027046107c [ESGB-994] DIMM SPD logging - unit testing bug fixes SHA-1: 54f3255d4ec9764670540a43b4f9e324fe16efea ESGB-1611 : Integrate iDRAC HII driver - iDRAC-HII Sirius X09 (SWB# 133DR X09) JIT-142749 - [Alar/Jalpa] BIOS setup menu system event log date and time display incorrect. SHA-1: aeb493fc8aa7476f95faf8643ae5734c2f2e56be [JIT-141618] R7515-EST-PASS2: Observed UEFI0077 one or more PCIe device errors occurred same logs 2 times at POST > Fix duplicate POST UEFI0077 error due to re-use of SMM communication buffer for both DXE and SMM errors SHA-1: cfdc876fb8e7fd3e6153aa0cdb97fb201c4a0b30 [JIT-143380] R7515-EST: Observing USBXHCI.Embedded is not showing in R7515 and Its showing R7415. - Added static PCI device information for XHCI on ROME platform. SHA-1: 6157edbfcb49317a585067e2b94297a33f8f9e36 [ESGB-994] DIMM SPD logging - unit testing bug fixes SHA-1: e03993b8c267c3fb38e81fa5093be28973802325 [ESGB-1648] Hide HTTPS support (HII and attributes) for AMD platforms. SHA-1: 1cfd1217aa306b1a16b1f6ddd4b29e3579878351 ESGB-554 [WSMT Changes for 15G] [WSMT Changes for 14G MLK] Changed WmiAcpiBufferSizeSmm to ACPI_METHOD_ARGUMENT_V1_DATA_LENGTH, since 65535 is the max buffer length supported by Microsoft. SHA-1: ec832eb49ec479f1c9a718d3b5b86c6195c0c9c7 [ESGB-994] DIMM SPD logging - unit testing bug fix SHA-1: e663ddd5df285e9ed10540b15a58b9408ea2dd4e [ESGB-886] change prefetcher description SHA-1: 48afd0c8f9191cf57ba8529df70c9760aff19b19 [ESGB-994] DIMM SPD logging - consolidate corrected, deferred, and uncorrected error data to same structure > Aligns with new DIMM SPD logging spec revision for Rome register set data SHA-1: 7bc3466c9849334b301cdfc13ff891254b1a1919 [ESGB-994] DIMM SPD logging - fix structure data alignment issue SHA-1: 2d7ec01ee536e6ae29489a1e49beb8909289843b [ESGB-854] Security - SEV. Skip PSP SEV data synchronization if SEV backup data in data ROM are all ff' SHA-1: 6990bae24058bb93edc8f2e36bd5ec330243bfca [ESGB-1485] TCG. #CodeCleanUp SHA-1: f0263db5ae119fd0d4e49103c8dc0b7dd0fe6d31 [ESGB-1648] Hide HTTPS support for AMD platforms. SHA-1: 51e2ae3208519cee364ed50fef7bba29a0b61bc3 [ESGB-1499] Fixed redefinition SPD_DEBUG build issue and use SMBUS_DEBUG for smbus behaviors only. SHA-1: d44c1ad4b5f6eaa1e77af74bdc777b10827f1907 * [JIT-141321] Temporary fix HBA330 cannot detected HDD during installation Ubuntu 18.04.2 with Legacy mode. SHA-1: c3e1f76ba1b7b7fbe20586ca7da2332fd90fcbab [ESGB-854] Security - SEV. Enable the code to store PSP SEV data in data ROM. SHA-1: f20c558eff60dd4a6e2dbf4fe38ade44e45a630b [ESGB-854] Security - SEV. - Only do SEV data synchronization on B0 SOC. - Using warm rest after SEV data synchronized. **************************************************************************** - Version: 0.4.11 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 7/30/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.2 RC1 for Family 17h * ABL Firmware Version: RABLSSP10022010 * PSP Firmware Version: 00.0C.00.6D * SMU Firmware Version: 36.77.0 * DXIO Firmware Version : 36.614 * uCode : A0-08300027/B0-08301025 * S150 Firmware Version: 6.0.0.0010 * iDRAC-HII Sirius X08 (SWB# 133DR X08) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. 8. The SMU MCE defect has been fixed in this release 0.4.9. But user may still see MCE message in the 1st boot after BIOS update. It's an expected behavior and please don't create ticket for it. 9. The previous wrong CPU core number reporting has been fixed in 0.4.9 release. "A replacement part was detected for CPU device" in LC log is expected when update to BIOS 0.4.9. 10.LS 1S All-Points Bulletin (APB) #28 - CPU fused feature enabled in Alar/Jalpa BIOS 0.4.11 -Once updated to BIOS 0.4.11, Alar/Jalpa system will not be able to downgrade to older BIOS. -If the CPU is fused, system cannot boot with older BIOS which does not support fusing. The system will lock with no video. The POST code in SPIVIEW card is 0x22. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Enable CPU fusing feature. **************************************************************************** - Version: 0.4.10 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 7/26/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.2 RC1 for Family 17h * ABL Firmware Version: RABLSSP10022010 * PSP Firmware Version: 00.0C.00.6D * SMU Firmware Version: 36.77.0 * DXIO Firmware Version : 36.614 * uCode : A0-08300027/B0-08301025 * S150 Firmware Version: 6.0.0.0010 * iDRAC-HII Sirius X08 (SWB# 133DR X08) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. 8. The SMU MCE defect has been fixed in this release 0.4.9. But user may still see MCE message in the 1st boot after BIOS update. It's an expected behavior and please don't create ticket for it. 9. The previous wrong CPU core number reporting has been fixed in 0.4.9 release. "A replacement part was detected for CPU device" in LC log is expected when update to BIOS 0.4.9. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-141904 R7515-EST-Pass2: Observed "A fatal error was detected on a component at bus 2 device 0 function 1" after the Win2019 OS installation 2. Fix JIT-142416 R7515-EST-PASS2: Observed fatal error(Intel i350 card)was detected on a component at bus 65 device 0 function 0 to 3 critical error on R7515 System 3. Fix JIT-143311 R6515-R7515-EST-PASS2 : - None of the PCIe cards are listed in HII F2-> Bios Settings -> Integrated Devices -> Slot Bifurcation section. 4. Fix JIT-143303 R6515-R7515-EST-PASS2 : - None of the PCIe cards are listed in HII F2-> Bios Settings -> Integrated Devices -> Slot Disablement section. 5. Update Code Base to version SHA-1: 5b1ff451e41a8727ec20472bad3968de0f5e0106 ------------------------ SHA-1: d893fa7f102c5ba1663f48f6335e0b2acff1b53b [ESGB-992] Fix build error when generating FD for recovery BIOS. SHA-1: 5b1ff451e41a8727ec20472bad3968de0f5e0106 [ESGB-992] Alar/Jalpa. Change the version number to 91.4.10 SHA-1: 46c469678ad541f7fa7e4d9debb7d5ffb0cacbb3 [ESGB-1320] S150 6.0.0.0010 for ALAR & JALPA. SHA-1: 0c2a75048a6f1912a43a98e6f2d51da42e9ec677 [JIT-142807] Fix typo in the definition of STR_EXPORT_RC_COMPLETE SHA-1: 9149daf1eb0be72a443714330b032f3ffdf78a0c [JIT-142114] - ROADSTER-EST-PASS1:PCI SLOT2 card is not listing in SLOT Bifurcation Page SHA-1: 89f0d069c80f6efbec670c55acd066b49a198fd6 [ESGB-674] Make Linear core enumeration the default core enumeration for the MADT table SHA-1: 991e37449d3083dcbf424146edddb021e056bdef JIT-142807: Remove redundant definition, and removed the space in "one way" as x-UEFI tag. SHA-1: 3d0931abd45bf9d8fe16c8be7ae55ed925890ee5 [JIT-135943] [Reventon-C3] NMI when inserting NVMe drive - Bus Fatal Error ACS Violation SHA-1: dd7c1c8474de562ae612a8d8519b2640e9ce305d [ESGB-1057] : Hot plug and basic NVMe ennoblement changes for Sesto. Code changes to differentiate between C7 and C4 configuration. > Whitespace and indentation updates for readability SHA-1: 3af3c6fd49e4898d8649ca2ca11c2ad2c3358212 [ESGB-1001] SPI DEVELOPMENT. Using 4byte address mode to access code ROM if the system is running with SPI emulator. SHA-1: 863e55b1974d0ef9d57990c8d68848d0db9e0dc9 [ESGB-1779] Use DellElogIpmiLib for error logging. SHA-1: c21fbedc0e4677b84be88b6ca0c57704b2ea3c43 [JIT-143014] Force APCB_TOKEN_UID_FORCEPWRDOWNTHROTEN_VALUE = FALSE SHA-1: 94b7d7b4438337cd0278507ec91171d76e6df239 [ESGB-1102] AGESA 1002 RC1 Integration PART II, RAS override directories SHA-1: 76489513051ad7a34e4741c128165a437f25d72c [ESGB-1704] Add 'not' logic in dynamic table. Add BUILDING_BIOS_FOR_AMD_SYSTEM for debug. SHA-1: fd02c3ec4235de0a2f9d2fb141898c2e53995676 [ESGB-1485] TCG #CodeCleanUp. Remove DELL override TcgMor and use SecurityPkg\Tcg\MemoryOverwriteControl\TcgMor SHA-1: 1d097b90cfa77ca370560774a9017bc5276a9a62 [ESGB-1102] AGESA 1002 RC1 Integration PART 1 SHA-1: e61ef2ba962e9346b28b8b0629e8a0c56dfc656e * ESGB-1303 Check DIMM ID first cut code into master. Needs a good bit of rework to transform from using a shell app and protocol to internal BIOS functioning. SHA-1: 858bd3fdd46f930b3c97e81de9d256734a3944dc [ESGB-1485] TCG. #CodeCleanUp Remove DELL override library TrEEPhysicalPresenceLib.(TrEE = Trust Execution Environment) This library is depreciated and using Tcg2PhysicalPresenceLib instead. SHA-1: 8401123b2c93f2cf5783f2612cd54004257b9dc7 [ESGB-854] Security - SEV. Synchronize SEV data between data ROM and code ROM in early PEI phase. SHA-1: 1ff2af7035f40aaf059160a67990b6c4070df229 JIT-142386 [Roadster_ST] No discription for Reset option of Boot Sequence Retry in Help menu(F1) SHA-1: e1ebb2a58ada7a40b206dcdc3af9549cfadf3198 [ESGB-1320] S150 6.0.0.0009 for ALAR & JALPA. SHA-1: 169498dede043ae3deb9c0f0c9c59d72c619a769 [JIT-138689] COMMs_Broadcom_Sophie: Broadcom Gigabit Ethernet BCM5720 some of the attributes are showing as "Unknown" Match clean up format SHA-1: bc38b83ba41a2963af8e64fb130db7fa2ad347ec [JIT-142198] Sync NULL to iDrac when there's no cert stored in NVRAM SHA-1: 90e5931ffcccd456cdd4a80193de61499f306754 [JIT-124885] [Sesto] PCIe Root Port will display "Yellow Bang" under Windows 2016 with GPU NVIDIA M10 at Riser 3A. SHA-1: 611af9d7da1d7fca0b1b4bd11f9d44b69562c88f [ESGB-852] Enable and fix type in Alar PSP fusing equate SHA-1: 54848e4e9f1df2bc13b02ce5e7d3c914ff5aeb13 [JIT-142400] Spacing between comma and the previous word of Hardware and Software Prefetcher. SHA-1: 843bdf00caa8b281ff5c0e68be5463416469dc96 [JIT-142398] [Roadster ST] No period for the NVMe device help description in Device Settings. SHA-1: 1e8ac9a1412b4fda670c5167b7c73ed0715344e9 [JIT-138254] Observing incorrect (35) slot number showing for non-fatal PCIe error. SHA-1: 0881c9083610ac3f0289e56c995c32fbaee61b57 ESGB-1611 : Integrate iDRAC HII driver - iDRAC-HII Sirius X08 (SWB# 133DR X08) JIT-129164 : 15G - Halo - Management USB Settings help information need to add in HII, Updated iDRAC-HII release version to 4.00.00.09 JIT-134410 - iDRAC-HII CSSD library Integration - CSSD 7.0 BLD 0006 release + L10n Translations integration. Updated iDRAC-HII release version to 4.00.00.08 SHA-1: 5b791d1227a242a133af576146cfb8efded8351d, ec59819ee147087a02450a42fe81467169e708f5 [JIT-141618] R7515-EST-PASS2: Observed UEFI0077 one or more PCIe device errors occurred same logs 2 times at POST - Additional serial debug code added to assist with debug efforts SHA-1: 5d0c4658759df6151f20a6656421062a281d5600 [JIT-140437] R7515-EST: Observing non-fatal PCIe error detected on component warning logs during NVME drives with S150 hot plug on R7515 WIN 2019 OS SHA-1: 8cc425b0f84b34fd56b969eea859ce1e054e1732 [ESGB-1001] [AMD] SPI development and enhancement. Get the size and JEDEC ID based on input ROM ID. **************************************************************************** - Version: 0.4.9 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 7/19/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.1 RC3 for Family 17h * ABL Firmware Version: RABLSSP10002012 * PSP Firmware Version: 00.0C.00.68 * SMU Firmware Version: 36.74.0 * DXIO Firmware Version : 36.613 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0.0009 * iDRAC-HII Sirius X08 (SWB# 133DR X08) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. 8. The SMU MCE defect has been fixed in this release 0.4.9. But user may still see MCE message in the 1st boot after BIOS update. It's an expected behavior and please don't create ticket for it. 9. The previous wrong CPU core number reporting has been fixed in 0.4.9 release. "A replacement part was detected for CPU device" in LC log is expected when update to BIOS 0.4.9. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-139058 [Alar/Jalpa] In iDRAC GUI inventory, certain CPU core number do not match the spec. 2. Fix JIT-140380 R7515-EST: Observed UEFI0388(Requested NUMA node per socket profile NPS1 was not honored) log showing at Bios Post and Its not showing in LCL 3. Fix JIT-137984 R6515-EST: Performance issue- LC exit operation takes 40% more time than 14G (R6415) 4. Fix JIT-141591 Alar/Jalpa Onboard SATA setting change 5. Fix JIT-142060 R6515-EST:PASS2: Observing LOM 0 showing 3 times in R6515 OMSA GUI Slot information page 6. Fix JIT-138254 R7515-EST: Observing incorrect(35) slot number showing for non-fatal PCIe error 7. Fix JIT-140437 R7515-EST: Observing non-fatal PCIe error detected on component warning logs during NVME drives with S150 hot plug on R7515 WIN 2019 OS 8. Fix JIT-140455 R7515-EST: Observing incorrect bus number in non-fatal PCIe error detected warning log for NVME drives on R7515 system 9. Fix JIT-140373 R7515-EST: Observed UEFI0388: Requested NUMA node per socket profile NPS1 was not honored logs at Post 10. SMU MCE fix - JIT-134965 15G Halo- PT- Correctable Machine Check reported followed by Device not detected for ( P2PBridge ) reported after updating BIOS on R6515 server…V - JIT-137288 R6515-EST: Observing "Correctable Machine check error" after updating M.2 HDD FW - JIT-134612 R7515: After changing the BIOS modes, observing "Correctable Machine Check Exception detected on CPU 1" - JIT-132380 15G:SWPT:Jalpa: CPU Machine check error for every reboot after updating BIOS to 0.3.13 - JIT-142065 Still getting MCE and OEM diagnostic events with current firmware - JIT-140206 Putting T4 card in Riser two results in CPU machine check error. - JIT-133716 SWRAID6.0:Jalpa-SATA- Observed POST OS error "Source- Microsoft-Windows-WHEA-Logger" in system event logs in WIN 2016 11. Update Code Base to version SHA-1: 51e3734a88b80cde510543f8bb0b44f9a716c875 ------------------------ SHA-1: 1e8ac9a1412b4fda670c5167b7c73ed0715344e9 [JIT-138254] Observing incorrect (35) slot number showing for non-fatal PCIe error. Check if the physical slot number is larger than 128 which is defined for SSD slot cases, otherwise log is as normal PCIe slot. For SSD case, we mask bits - Dell defined. Unique bit[7] and Bay ID bits[6:5] avoid wrong numbers. SHA-1: 0881c9083610ac3f0289e56c995c32fbaee61b57 ESGB-1611 : Integrate iDRAC HII driver - iDRAC-HII Sirius X08 (SWB# 133DR X08) JIT-129164 : 15G - Halo - Management USB Settings help information need to add in HII, Updated iDRAC-HII release version to 4.00.00.09 JIT-134410 - iDRAC-HII CSSD library Integration - CSSD 7.0 BLD 0006 release + L10n Translations integration. Updated iDRAC-HII release version to 4.00.00.08 SHA-1: 5b791d1227a242a133af576146cfb8efded8351d, ec59819ee147087a02450a42fe81467169e708f5 [JIT-141618] R7515-EST-PASS2: Observed UEFI0077 one or more PCIe device errors occurred same logs 2 times at POST. - Additional serial debug code added to assist with debug efforts SHA-1: 5d0c4658759df6151f20a6656421062a281d5600 [JIT-140437] R7515-EST: Observing non-fatal PCIe error detected on component warning logs during NVME drives with S150 hot plug on R7515 WIN 2019 OS SHA-1: 51e3734a88b80cde510543f8bb0b44f9a716c875 [ESGB-992] Alar/Jalpa. Change the version number to 91.4.9 SHA-1: bb2af6fb659965038252a2115ba9edc840155ba4 [JIT-132380] 15G:SWPT:Jalpa: CPU Machine check error for every reboot after updating BIOS to 0.3.13. Revert Reset to AMD's original code drop to fix SMU MCE. SMU is fixed in 1001 RC3 to clear PHY DRAM ECC. However, this requires the cold reset, which is done by running AMD's code. SHA-1: ad34653b38c53e43e5392c64e1b33ed251d0237f [JIT-137751] For A-rev boards Remove UEFI tool/FMP update capability and only allow DUP update regardless of jumper state. TMS blocker enabled, only DUP update can unblock it. Solution: For sirius platform, CPLD EFI utility is blocked on A-rev board but Polaris platforms keeps original design. Follow the new definition (JIT-138943) for cpld_jtag_en and cpld_jtag_lock bit field, BIOS will set cp... SHA-1: f11d836ce0d83d531f3ff94fcaf8e96d3093db48 [JIT-141591] (CR) Alar/Jalpa Onboard SATA setting change. SHA-1: 53aabbbd2b9a676c4bd44b6ea2d58b8dc723512d [JIT-124885] [Sesto] PCIe Root Port will display "Yellow Bang" under Windows 2016 with GPU NVIDIA M10 at Riser 3A. Change the IO limit from 200_0000 to 1_0000 to fix the issue where system fails to allocate IO resource (because we build CPU HOB info with only 1_0000 IO space) when moving M10 from riser 3 to riser 4. SHA-1: 3b2dead39127b79764b52f6dfe1b92cdb7316445 [ESGB-559] Fix issues in the RSOD handler: - Event log flushes with post exception event trace. - Increased likelihood that RSOD doesn’t update screen SHA-1: 24fa772146e6bfb7addc4dd0cfcd858f99ada4dc [ESGB-1491] Cordoba: Add Device Config Error Logging for incompatible riser slot routings SHA-1: cf71caa7a52a2ed904ed88b91c982774d5efc902 [ESGB-1491] Cordoba: Add Device Config Error Logging for Cordoba payload checksum failures SHA-1: e51b1ff52b5cae02a9715fdc219224cbcb9f88e8 [ESGB-1491] Cordoba: Log payload COMM ERROR to Device Config Error Log SHA-1: 56277810673ab04789e13114a35f763388d38c44 [ESGB-1316] Changes NPS profile default to NPS_1 from NPS_4 SHA-1: 1e7faa343f4f6ca437b09a2662961c99be592441 [ESGB-829] Adding debug menu options Pcie preferred IO device option SHA-1: 01f8726a9610af23149d178fe5a28c21a51f04f7 [ESGB-886] add debug menu for correctable error diagnostic mode part two SHA-1: e3959b9c85cbeb70a19f72378d632bd86f359dd6 [JIT-141557] Power Button is Enabled During CPLD Update Solution: Disable the NMI and power buttons before CPLD update and restore them after update process is done. SHA-1: 4fee3838809d7a65bf1a6d2d33fa3f88a83d5224 Revert "[ESGB-994] Enabled SPD logging for all AMD platforms. This will support SPD 1.x behaviors with basic functionalities of SMBUS Direct Access (POST) and IDRAC Proxy DIMM access interface (OS Run-Time)." SHA-1: e108a4e5833907405bbf12c47d5e0cd91f2dc92c [JIT-137984] R6515-EST: Performance issue- LC exit operation takes 40% more time than 14G (R6415). Detect media again for removable media if the media is not preset and ASC is media change (0x28). SHA-1: 4bc2d25076796fdd196c095b77074fa84b26310b [JIT-141499] [Roadster ST] Many duplicate items "LOM 0" in SMBIOS type 9 with BIOS 0.4.1. - Set PcieLocationId as 'NotUsed' when no Lane is used - Update 2 strings "Slimline_x2" and "IntegratedPcie" in PcieLocationIdTypeStrings table for SHA-1: 460257887d492b9148f2c647fcd76fa750f77202 [ESGB-854] Security - SEV. Temporary suppress the code which will store the SEV data to data ROM. - AMD told us PSP will read/write SEV data during P.O.S.T (ABL or x86 code) not OS runtime so SEV data in code ROM is still accessible for PSP. SHA-1: ef547b13c001c185c369359eacf8db57f890682a [ESGB-994] Added DIMM present status check for WriteBlock behaviors for better performance. SHA-1: 5e71fec5280a2869be644227842491e0ae04ba3a [ESGB-994] Enabled SPD logging for all AMD platforms. This will support SPD 1.x behaviors with basic functionalities of SMBUS Direct Access (POST) and IDRAC Proxy DIMM access interface (OS Run-Time). SHA-1: f5a6c5635c188c96b91542fbea92eb8335635e45 [ESGB-886] add debug menu for correctable error diagnostic mode. fix the issue that cpu core number does not report correct for 8 core and 16 cores cpu. SHA-1: e2fccf1f0bec48690ce0686924cabf6951fc3356 [ESGB-886] Rome RAS: Dell AMD PPR Support. Enable PPR support SHA-1: b19291270b6d7598a25bcd93026609b73264ecff [JIT-124885] [Sesto] PCIe Root Port will display "Yellow Bang" under Windows 2016 with GPU NVIDIA M10 at Riser 3A. Port Stan's IO fix from Naples to Rome. SHA-1: b43a30d2308805ea6216e2466f9276f34b23b402 [ESGB-886] Rome RAS modifications > Standardize Runtime and DXE logging of PCIe errors > Properly distinguish between Slot, SSD, and embedded device errors in DXE code SHA-1: 03116ec20ae90b712f175bc5a31fd4c05b2fa79a [JIT-139543] buildverify PCI Devices/Cards failed - x12 Backplane missing. 1.Fixed an issue where the platform NVME Dxe could saved incorrect upstream bridge PciIoHandle in the ActiveNvmelist array. That would cause the PLX switch unlock and lock process work abnormally. This code change will enhance and avoid such the situation happening. 2.Added additional check for DSPs' and hotplug capable to avoid PERC controller connected switch. **************************************************************************** - Version: 0.4.8 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 7/12/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.1 RC3 for Family 17h * ABL Firmware Version: RABLSSP10002012 * PSP Firmware Version: 00.0C.00.68 * SMU Firmware Version: 36.74.0 * DXIO Firmware Version : 36.613 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0.0009 * iDRAC-HII Sirius X06 (SWB# 133DR X06) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-140559 PCI Slot ID mismatch while reporting fatal error 2. Update Code Base to version SHA-1: 59e0369364c92f2c43a4eb837a5618790e054fdc ------------------------ SHA-1: b43a30d2308805ea6216e2466f9276f34b23b402 [ESGB-886] Rome RAS modifications. > Standardize Runtime and DXE logging of PCIe errors > Properly distinguish between Slot, SSD, and embedded device errors in DXE code SHA-1: 6c24c10162ab77e79929ca30f33a40b08a242613 [JIT-139543] buildverify PCI Devices/Cards failed - x12 Backplane missing. (cherry picked from commit 03116ec20ae90b712f175bc5a31fd4c05b2fa79a) SHA-1: 6a6a2df99a5fe6cecfd93c3e301606e8d0a90665 [ESGB-992] Alar/Jalpa. SWRAID S150 UEFI Firmware v6.0.0.0009 integration with BIOS SHA-1: 49b066ef0876decd52e49880f5854b35491dada4 [ESGB-992] Alar/Jalpa. Set OS watchdog timer default value to disable. SHA-1: 4b92b7a1e54312157bff7903de38826e0034b7cc [ESGB-992] Alar/Jalpa. Disable CPU fuse feature. SHA-1: 59e0369364c92f2c43a4eb837a5618790e054fdc [ESGB-992] Alar/Jalpa. Change the version number to 91.4.8 SHA-1: 1d4f8e4872ff7c9c7b59cc64109d94370d5b0aff [ESGB-852] Code cleanup. The function RegisterPostDynameErrorMessage() is not working. Need to debug. SHA-1: d5e8a061fa8192a6815c2bab135e6a2d4046889c [ESGB-841] FCH-USB. - Register FCH USB SMI prior to connect USH host controllers for AMD platform ONLY. - Note, current FCH provided periodic SMI can not support more than one requester so the external USB host controllers are not supported on AMD platform. SHA-1: e4820533a839c64a1a34afc6a4cb413073e92ade ESGB-1313: [16G] send SCP by JSON format to iDRAC in base configuration -add switch flag, please dont enabled it. -add send SCP when setup change. SHA-1: 002409fa6fcef09c3fb2e9c2e993a62b7865486c [JIT-139821] bufix for the issue System Hangs during reboot following delete config. call PciePortDetect() function when PciIo protocol has been installed so that the PciePortMap can be established before pci scan done SHA-1: bf23399a94bd4da204a8f3401e64f25a5280ab68 [JIT-119671] Change for WAFL LinkSpeed SHA-1: 8437e21645195b443618c629dfc557bf1b6b7da0 [ESGB-886] Temporarily revert PCIe corrected error logging changes from: SHA-1: 38850aab515c169ca287f1cd7469d14aed1cd046 SHA-1: ed79a1b7aedc49d3bc340392555a2e1c16ad3117 [ESGB-852] Read 2nd CPU status by reading fuse status of 2nd CPU from bus 0x80 config space SHA-1: dd1a222c64eaf754c884121875965f4e20de7b1f [JIT-140371] [Sesto] Description of Help message are incorrect on BIOS 0.3.15. SHA-1: cc7614d292b5e5c90836d71659ad9dae9b7fde2d, 4e69b9d64effb18e434db29e13c1b1bb5f2148ac [JIT-138689] COMMs_Broadcom_Sophie: Broadcom Gigabit Ethernet BCM5720 some of the attributes are showing as "Unknown" - Delete unnecessary function - Fix up OCP slot length to SlotLengthOther on Roadster/Sesto/Reventon - Fix clean up error: REadd fix up Mazzanine slot length on Alar (JIT-133922) SHA-1: 2225241939d79a7c4d37d5302360fa7187f09e52 [ESGB-992] Alar/Jalpa BIOS development for Rome ES1 Bring-up. Reduce the SPI read by caching the retrieved attribute value. SHA-1: 18a453a43539274216a9a9a333fbe727f0f11264 [ESGB-1316] Added error log to LC for failed NPS profile SHA-1: c8b346f3943c36b6d5c1f6ae0eb487767a42f027 [JIT-113367] DpiPci Code clean up. String copy with correct length. SHA-1: 7a5c89363bfc308e41e599cd7b8eea860e0eba46 [JIT-113367] DpiPci Code clean up - Fix issue with NVME ConnectorType not being passed correctly. This was happening inside GetActiveSlimlineDeviceInfo, Bifurcation structure was used but now we have DELL_AMD_PORT_INFO_PUBLIC. Code was not updating this structure. SHA-1: 1e7703ec22630ad32d08747902e847d9b6ab4209 [ESGB-1196] Cordoba: Add debug print to alert that dynamic payload parsing is disabled SHA-1: 1aede64770fe175fddd624c4d895e69eb41a6f00 JIT-139614: 15GSWPT:REVENTON- Able to see Backup and Restore keywords under F10 option on POST screen which is not supported on AMD platforms SHA-1: 91a4ee7bc8e17902d920aaac30b704608bcf72d4 [JIT-139083] Fix system cannot boot into Windows 2019 while "NUMA Node Per Socket" is set to 1 in CSM mode on Roadster 2 sockets. **************************************************************************** - Version: 0.4.7 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 7/5/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.1 RC3 for Family 17h * ABL Firmware Version: RABLSSP10002012 * PSP Firmware Version: 00.0C.00.68 * SMU Firmware Version: 36.74.0 * DXIO Firmware Version : 36.613 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0.0008 * iDRAC-HII Sirius X06 (SWB# 133DR X06) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-139809 R6515-EST:"A high-severity issue is detected in the SSD bay 1, Slot 1" Log entry in LC 2. Fix JIT-139902 [Alar/Jalpa]BIOS pops up a saving changes error message when changing system profile settings. 3. Update Code Base to version SHA-1: 314eb5a1283c2a2fa9ee70f5cb949089dc0f73d1 ------------------------ SHA-1: 49b066ef0876decd52e49880f5854b35491dada4 [ESGB-992] Alar/Jalpa. Set OS watchdog timer default value to disable. SHA-1: 314eb5a1283c2a2fa9ee70f5cb949089dc0f73d1 [ESGB-992] Alar/Jalpa. Change the version number to 91.4.7 SHA-1: 38850aab515c169ca287f1cd7469d14aed1cd046 [ESGB-886] Rome RAS modifications > Remove usage of NVRAM CORRECTABLE_ERRORS_ENABLE variable > Aligns with Intel implementation SHA-1: 92c6b155390505c37e2c2064564c445369baced8 [ESGB-1102] AGESA 1001 RC1 Integration, RAS Override Directories SHA-1: 4f7d69fc2c655d42ca91599312fe9c805c4e42a6 JIT-140102: SWRAID S150 UEFI Firmware v6.0.0.0008 integration with BIOS SHA-1: 6c964d331a9ca7d41a35a3689e0a92a62bf87ce1 [JIT-130018] Fix issue with SPD Last Boot Reason and BIOS efi update tool. SHA-1: 780eb6731662ca44fe2aaf812701b2de8e18eda9 JIT-139090 15G-Reventon - CPU frequency is not match with CPU SPEC, as HiiProcessorDpi.c is comment code, so the c340a84def39fa25bfbfbe35739712d414a1e8aa change might affect Intel platform, so this change seperate AMD ROME from Intel platform SHA-1: 6e09e00a7ccaedaa5cb21afca13c2d25f2fba14a [ESGB-1102] AGESA 1001 RC3 Integration PART 1 SHA-1: 54a9a941fb28c2739d74b6fe1ce6569dacd4cf9b [ESGB-1648] Add HTTPS certificate mgt HII driver. SHA-1: 89e6233661326f3e24aab4d3bce0dc54cc90ded6 [JIT-139809] R6515-EST:"A high-severity issue is detected in the SSD bay 1, Slot 1" Log entry in LC SHA-1: 9bd206a332881221ce6d32653f641d6d80cbd0ff [ESGB-886] Runtime error handler improvements > Fix bug where we are logging root port Vendor ID instead of endpoint SHA-1: 382b38d09375210dee72eebc14ef4942982dfeff [JIT-134832] HWRAID BOSS 15G -PCIe bus Fatal error was detected on a components at bus 64,65 (across Ubuntu 18.4.2 reboot installed on BOSS) SHA-1: da2f410d9ad12f54d7c955b430ba908c6930041e [ESGB-561] Check for the condition where the link is down and downstream device is not visible. SHA-1: ff5a390dc8934a6b312159dcf5db26b1a282ac86 [JIT-139763] [R&S] System will prompt an error message when changing "System profile" setting. SHA-1: 4b1ff3ef5dbe1b809fe98077a8958cfdb234ce2a [ESGB-1572] UEFI Variable Service Handling. Remove the use of shadowed memory. SHA-1: 105f5cf342e8f917b75cf93e7edaaf48a30b031a [JIT-139775] R7515 - EST : - Total PCIe physical slot count is not matching with the PCIe slots displayed in DIAG Screen Fix AGESA mechanism and only set PCIe Slot Implemented bit when it is valid slot. SHA-1: 497df3504d61c5aadbea1755b79446f4f5e8338a JIT-139507 [Roadster_PT] Redundant OS Location set to Internal SD Card is malfunction with BIOS 0.3.15 - Fix build error on the platforms which don't enable SETUP_MODULARIZATION. SHA-1: 9280026dcf681d5cf857260a0b94a3b6faa067d1 JIT-139507 [Roadster_PT] Redundant OS Location set to Internal SD Card is mulfunction with BIOS 0.3.15 - Support new attribute name REDUNDANT_OS_LOCATION_INTERNAL_SD_NON_RIPS_ATTR_VAL in BDS. SHA-1: 6b6a67af93b84a5292371af249b6255891c770ba [ESGB-829] Adding debug menu options for Platform First Error Handlding, ApbDis, Fixed Socket P-States SHA-1: 5467c29546bf68332f7ca31059a4ced71528bcf0 [ESGB-561] Log Vendor ID in case it's missing from the SEL log. SHA-1: f8d889b601534e3ccee683cc9914287fddffbe26 ESGB-1335 Add 15G OEMID feature to replace certain SMBIOS strings to 15G platforms. SHA-1: e9200c252c5b8de9973efa8be1d6c02b3a501739 [JIT-134691] CSM - fix SLES15SP1-RC2 dmesg shows "ACPI CPPC: Failed to find PCC channel for subspace 0". SHA-1: 6df4322a9b8e524f5d875ed20a87fe27098f5ec8 [JIT-139090] 15G-Reventon - CPU frequency is not match with CPU SPEC modify Algorithm to fix CPU speed display issue. SHA-1: 63a2a92161c091069cb0fdedf0f9c54ceeb53427 [ESGB-1204] setup prebuild script: check whether related files are update to date before parsing HII string files SHA-1: a1bfe4d0852d66ef8ea844bb002a500ae7547d2d [JIT-138113][Alar/Jalpa] The PERC VD placeholders numbering should not be the same. SHA-1: 650863246af76ba44ceba858230a61a4dc0117aa JIT-139733: IPMI bootonce fail to booting from NVME HardDrive -new add from 15G. SHA-1: 9c448a0a5cefe2816b1b3efe0cd47153a8af1dcc [JIT-137346] Jalpa C4 PLX wrong designation in SMBIOS [JIT-138990] Observing PCIe Slot0 in Bay 0 showing 2 times and slot details incorrectly showing in R7515 OMSA GUI Slot information page. SHA-1: b7711dfcad40abcca4b2a1eef1c0416c09d87b95 [ESGB-561] Clear Register Pointer error type SHA-1: 44a5340ea6a3cfbd7bd566c9a14982c6206abe48 [ESGB-1499] Enhanced SmbusExecute behaviors with additional attempt to avoid any unexpected failure when processing multiple read/write transactions or entering/existing the same OEM region. SHA-1: 1a07bf2d6f86969d93ac1cf22c8d97a63bac5293 [ESGB-561] Add Enhanced SEL log support. PCIe errors only. SHA-1: f3cc8b20445e25addab2e98bbd61aabe668d7fda [ESGB-994] DIMM SPD logging: code review updates, Round 6 SHA-1: f41a64277d02a171493a28a9ef2861ef1bd424df [JIT-130817]15G Platform : Create one new bit field definition for PSP/MRC serial debug. Solution: When debug menu page is disabled, PSP console out can be activated by the detection of CPLD 0x1E bit 1. CPLD version : Roadster 0.3.7, Reventon\Sesto 0.3.4, alar\Jalpa 0.3.1 above SHA-1: 82f67982362c8a34457b4c2a3fc46f4bea6a4320 [JIT-138056] [Reventon] Some SCT2.6A test items will fail by using BIOS0.3.12 Check input parameters first in SetImage routine to comply UEFI specification for SCT TEST. SHA-1: ad96c647a14aaaf72d2daab56fd01c2be4787f56 [JIT-137961] 15GSWPT-Roadster:Blink unblink operation working from HII page, which is not support This code was introduced accidentally in fixing JIT-129888. Original logic is correct so revert it. SHA-1: e1fccd3ae0800f42fc3005f6839c049687f9d98a [JIT-133522] PcdCfgCPPCMode = 0 in system profile of Performance and PcdCfgCPPCMode =1 in system profile for PerformancePerWatt(OS) SHA-1: 45eae1896cdf02dce81efcda9527cdfa1726190e [ESGB-1604] Add SendEngLog function in DellTelemetryDxe.c to signify to iDRAC the end of a logging for the passed in log type SHA-1: d490905c107c77a3cbdb6b0f476d0ec0c679ba6b [ESGB-1102] AGESA 1001 RC1 Integration into MASTER **************************************************************************** - Version: 0.4.6 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 7/3/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.0 RC3 for Family 17h * ABL Firmware Version: RABLSSP10002011 * PSP Firmware Version: 00.0C.00.63 * SMU Firmware Version: 36.70.0 * DXIO Firmware Version : 36.605 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0-0007 * iDRAC-HII Sirius X06 (SWB# 133DR X06) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-139602 [15G] [Alar/Jalpa] Show Liquid Cooling Message during POST Workaround: Please press 'N' key when the screen shows below massage: ------------------------------------------------------------ No Liquid Cooling setting on Liquid Cooling capable system Press Y to set Liquid Cooling setting to enabled Press N to set Liquid Cooling setting to disable Press other key to skip Liquid Cooling setting for this boot ------------------------------------------------------------ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-138990 R7515-EST: Observing PCIe SSD Slot 0 in Bay 0 showing 2 times and slot details incorrectly showing in R7515 OMSA GUI Slot information page 2. Fix JIT-137346 Jalpa C4 PLX wrong designation in SMBIOS 3. Fix JIT-134691 [JALPA PT][SLES15SP1-RC2] dmesg shows "ACPI CPPC: Failed to find PCC channel for subspace 0" 4. Fix JIT-138113 [Alar/Jalpa] The PERC VD placeholders numbering should not be the same. 5. Fix JIT-138860 [Alar/Jalpa] CPU frequency is incorrect in Windows task manager 6. Fix JIT-139775 R7515 - EST : - Total PCIe physical slot count is not matching with the PCIe slots displayed in DIAG Screen 7. Fix JIT-139543 Sirius Jalpa Qual Build - BIOS 0.4.4 - buildverify: PCI Devices/Cards failed - X12 Backplane missing ------------------------ SHA-1: 481008d42f01d3e2c7b831e1c23bfec5cb129132 [JIT-133522] PcdCfgCPPCMode = 0 in system profile of Performance and PcdCfgCPPCMode =1 in system profile for PerformancePerWatt(OS) SHA-1: 3d8c21e67b0174e76d7cbcdf1f164d308ce61f8d [JIT-134691] CSM - fix SLES15SP1-RC2 dmesg shows "ACPI CPPC: Failed to find PCC channel for subspace 0". SHA-1: f13e4e59717484b105679df4d643f8be115f4644 [JIT-137346] Jalpa C4 PLX wrong designation in SMBIOS [JIT-138990] Observing PCIe Slot0 in Bay 0 showing 2 times and slot details incorrectly showing in R7515 OMSA GUI Slot information page. Root Cause : Upstream bridge of PCIe switch underneath the root port must be skipped and can't be added in Type 9. Solution : Check the port type of the device which is at the secondary bus underneath the CPU root port. If this PciIoHandle belongs to upstream port, skip it. SHA-1: 72f6106503d78126a55800d9dd99701d8c477bda [JIT-139775] R7515 - EST : - Total PCIe physical slot count is not matching with the PCIe slots displayed in DIAG Screen Fix AGESA mechanism and only set PCIe Slot Implemented bit when it is valid slot. SHA-1: 7e552c009a32f34bb3445d0cd0af5e081420082d [JIT-139726] SWRAID S150 UEFI Firmware v6.0.0.0007 integration SHA-1: 4eb3dd73321ee83b7129469457eaf089682b283f [JIT-138113][Alar/Jalpa] The PERC VD placeholders numbering should not be the same. SHA-1: 2545f8dafdcf617939c8217050bf57a33b5d42ab [JIT-139543] BIOS 0.4.4 - buildverify: PCI Devices/Cards failed - X12 Backplane missing Unlocked the PLX switch in order to program the phy slot number of the downstream SSD. SHA-1: 481008d42f01d3e2c7b831e1c23bfec5cb129132 [JIT-133522] PcdCfgCPPCMode = 0 in system profile of Performance and PcdCfgCPPCMode =1 in system profile for PerformancePerWatt(OS) **************************************************************************** - Version: 0.4.5 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 6/28/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.0 RC3 for Family 17h * ABL Firmware Version: RABLSSP10002011 * PSP Firmware Version: 00.0C.00.63 * SMU Firmware Version: 36.70.0 * DXIO Firmware Version : 36.605 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0-0006 * iDRAC-HII Sirius X06 (SWB# 133DR X06) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-139602 [15G] [Alar/Jalpa] Show Liquid Cooling Message during POST Workaround: Please press 'N' key when the screen shows below massage: ------------------------------------------------------------ No Liquid Cooling setting on Liquid Cooling capable system Press Y to set Liquid Cooling setting to enabled Press N to set Liquid Cooling setting to disable Press other key to skip Liquid Cooling setting for this boot ------------------------------------------------------------ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-138612 R7515-EST: Observing TXT status message in Diag event log for TPM 2. Fix JIT-139160 15G Rome Jalpa - S150 shows FQDD of RAID.Embedded.2-1 3. Fix JIT-137542 R6515-EST : - Observed no value is set for "Minimum SEV-ES ASID" on iDRAC, But its set to '0' on HII. 4. Fix JIT-137929 R7515-EST: Observing Expected behavior on the first boot after CPU replacement message not showing in I-Drac LCL for UEFI0069 & UEFI0130 logs 5. Fix JIT-137932 R7515-EST: Observing Inconsistent log message between I-Drac LCL and Post for UEFI0069 log 6. Update Code Base to version SHA-1: b08c36fd08c1abbc4b9a6beb76b37759ae937fcf ------------------------ SHA-1: b08c36fd08c1abbc4b9a6beb76b37759ae937fcf [ESGB-992] Alar/Jalpa. Change the version number to 91.4.5 SHA-1: dea84cc6657fd43c274d3564394972077fe90c8a [JIT-139160] 15G Rome Jalpa - S150 shows FQDD of RAID.Embedded.2-1 SHA-1: 4a292c0b502c59eb39d1caf55d942d6ba6c4e6cb [ESGB-994] DIMM SPD logging: code review updates, Round 5 SHA-1: 2e7ffacb8507cf18b632128029db7a6f772929f2 ESGB-1611 : Integrate iDRAC HII driver - iDRAC-HII Sirius X06 (SWB# 133DR X06) JIT-138792 Reventon,SWPT: BIOS 0.3.13, No POST error for SAS cable removed from FPERC, updated iDRAC-HII release version to 4.00.00.07. SHA-1: 2b8944959d8f950148dcf7a10575728800a4257a [ESGB-992] Alar/Jalpa. set x2APIC default disable SHA-1: 12e25404551d1b6666591b425c7d455210d6a783 [JIT-134910] [R&S] Linux OS dmesg shows unexpected BERT error. SHA-1: e1575c7d093b94975d86725be5eefac490d39174 [ESGB-992] Pull in PlatformDxe on Alar/Jalpa platform. SHA-1: b1d2bd10d292ae4c19bb215ca3da69e0ad81fca4 [ESGB-992] Check if the allocated buffer is in memory map before freeing. SHA-1: 26f3d89015adb6ef8140a4105d7eaaefb4d9d782 [JIT-137829] CSM - Fix boot option is missing after installing in Legacy mode with SNAPI configuration for Roadster. SHA-1: 50e0b2bc341c0cc2c44659734ffe3b6b9a9f9cd9 [ESGB-1649] Liquid Cooling BIOS Prompt Implement Liquid Cooling BIOS prompt to make sure all LQC capable system have proper LQC setting. SHA-1: 47377e771d3005b7e3a749876e4e905f9c978ccb, a296734c5d937114378718e49e6c1a39179a449f [JIT-136397][R&S] The default value of Minimum SEV-ES ASID is incorrect when NVRAM CLEAR is enable. SHA-1: 46e123bf722cedf7302a76f319326323aa91beee [ESGB-992] Free the allocated buffer occupied by shadowed BIOS code. SHA-1: 902d53f578ee7056c3738c9420b86389c8d246aa [ESGB-994] Added enhancement with additional check to verify DIMM status via pSlotInfo prior any SPD operations to avoid SMBUS communication errors. SHA-1: 7b39c3e0746404eb45db88e9513c2ae4c20b66eb [ESGB-994] DIMM SPD logging: code review updates, Round 4 SHA-1: 33670008aa62c2c096225e39e34e8e8d66ac923a [ESGB-994] Added missing error check parameters from previous checked-in (SHA-1:ddba993df6) to avoid unexpected issues. SHA-1: 150eaa10a1486fd06e66d9da9b60079c97ebb072 [ESGB-886] Rome RAS: Memory error injection bug fix. Restore Dell policy to Cloak and Clear MCA SHA-1: c2c89230e48f80f593dcc0502b85f63a22ab2f93 [ESGB-648] A0 and B0 processor support. Adjust RAID ROM flash region information for B0 SOC so RAID FMP can flash new RAID FV to right location. SHA-1: c7fe43a4bfe26bbe777cc7122a4d821aa1ebdadb [ESGB-785] BIOS Update. - Enhance logic of region comparison. SHA-1: 207d6276efb87988307989a90742aa9a035d185f [JIT-136392] fix the issue with inject error on DIMMs in second CPU SHA-1: 92832ae2b992bc5dd40b8df974d58c4d9f188e43 [JIT-138425] - buildverify: PCI Devices/Cards failed - extra PCIE device. Set the physical slot number of slot capabilities register to follow Dell defined format SHA-1: 243103bfe316d4bb30c56bf4e9138bdbd7467919 [ESGB-1499] Added SMBUS SMM and DXE interface for ReadSPDBlock requested for AMD ROME usages only. SHA-1: ddba993df633cd032bca11f5565ae78c42c89d66 [ESGB-994] DIMM SPD logging: code review updates, Round 4 > Fix build error from prior check-in for Whitley projects. > Initial round of code review in Rome SDP logging CPU library SHA-1: a1aee4789c45907c486c1b92cac8cd405463a7cf [JIT-137929] R7515-EST: Observing Expected behavior on the first boot after CPU replacement message not showing in I-Drac LCL for UEFI0069 & UEFI0130 logs [JIT-137932] R7515-EST: Observing Inconsistent log message between I-Drac LCL and Post for UEFI0069 log Solution: Create two new error messages (UEFI0389 and UEFI0390) for AMD only. UEFI0389 replaces UEFI0034, and UEFI0390 replaces UEFI0069. SHA-1: 3547035e5ae1c53da7a712227e319fa9df268177 [ESGB-554][JIT-127977] Return EFI_OUT_OF_RESOURCES if the required heap is not allocated successfully. SHA-1: a7a995a50aa30fad471bbfe1c0145e9fbb67fa75 [JIT-138771]-Change Determinism Slider to Power for Performance and OS Perf Per Watt Profiles SHA-1: 9bcce7f5f2e94ad4c7473fc42ff1b3d87ccf8e87 [ESGB-994] DIMM SPD logging: code review updates, Round 2. > Include file consolidation SHA-1: 352a586355db73d3009e73416461ccfa7fe85243 [JIT-130817]15G Platform : Create one new bit field definition for PSP/MRC serial debug. SHA-1: 7602a9f83249a4715d1e627c52be9ec41b295423 [ESGB-994] DIMM SPD logging: code review updates, Round 2 SHA-1: 5eb90a84339122beb2e30e720a25048ab6e286c7 [ESGB-992] Fix a compiler error when DEBUG_MENU_ENABLE=FALSE. SHA-1: b46ffa2c3218c1eaeeee133166b6cc2ab5e48a5e [JIT-137823] RSOD-SOIT: System Hit RSOD after updating driver pack through LC and than changing refresh rate token in bios settings. - Report memory type information HOB earlier so InstallPeiMemory routine can arrange properly default bin for DXE GCD. - Create memory allocation HOB for the range starting from 16MB to 32MB for copied SHA-1: 9644115725adcf187b27cdabb5c397c367d7c926 JIT-138612: R7515-EST: Observing TXT status message in Diag event log for TPM. Do not send INTEL TXT state to iDRAC on AMD platform. SHA-1: ea7cf120be67546b679d2aa73e7d3fa61c324a75 [JIT-136392] bugfix for System hang at POST loading BIOS drivers... when use AMD RAS error injection tool to create DIMM error SHA-1: 1431e682dde2a6159c0c427cefe9c620e99dbb0c [ESGB-994] DIMM SPD logging: code review updates **************************************************************************** - Version: 0.4.4 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 6/25/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.0 RC3 for Family 17h * ABL Firmware Version: RABLSSP10002011 * PSP Firmware Version: 00.0C.00.63 * SMU Firmware Version: 36.70.0 * DXIO Firmware Version : 36.605 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0-0006 * iDRAC-HII Sirius X05 (SWB# 133DR X05) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-138425 Sirius Alar / Jalpa Qual Build - buildverify: PCI Devices/Cards failed - extra PCIE device ------------------------ SHA-1: 92832ae2b992bc5dd40b8df974d58c4d9f188e43 [JIT-138425] - buildverify: PCI Devices/Cards failed - extra PCIE device Set the physical slot number of slot capabilities register to follow Dell defined format Bit31:27 : 00000'b Bit26 : Unique 1'b Bit25:24 : Bay ID Bit23:19 : NVME's Slot ID **************************************************************************** - Version: 0.4.3 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 6/21/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.0 RC3 for Family 17h * ABL Firmware Version: RABLSSP10002011 * PSP Firmware Version: 00.0C.00.63 * SMU Firmware Version: 36.70.0 * DXIO Firmware Version : 36.605 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0-0006 * iDRAC-HII Sirius X05 (SWB# 133DR X05) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-137363 Jalpa C4 PCIe Link Speed Downtrain not reported correctly 2. Fix JIT-130263 [Alar/Jalpa] Windows HLK will detect "System Audio" related items in WS2016 Cerification. 3. Fix JIT-138173 R7515-EST: Observing 3.5 one SATA HDD(DPN- YH3T9) Diag always failing with error code 2000-0142 and Error: Could not open file: QRScan1.bmp on R7515 system 4. Fix JIT-138033 [Alar/Jalpa]The feature was no function under Legacy mode when setup Boot Sequence Retry to "Reset" option. 5. Fix JIT-125898 COMMs_Emulex_Kestrel - PCIe Gen4 Slot in Alar system reflecting as PCIe Gen 3 in IDRAC GUI and LC 6. Fix JIT-135158 [Alar/Jalpa] SMBIOS Type 9 - PCI slot type is undefined 7. Fix JIT-136521 COMMs_Broadcom_Sophie - PCIe Gen 3 Slot info is listing as 00B8 (Gen4) in IDRAC GUI HW Inventory page instead of 00b1 (Gen3) 8. Fix JIT-133998 MLNX 100G card enumerating as PCie Gen3 instead of PCIe Gen4 in ESXi. 9. Fix JIT-135848 Need BIOS support to keep PCie Gen3 slot speed train to Gen3 only 10. Update Code Base to version SHA-1: b18e2bf2619ce2f55daf8d4dcc3db29d071ac5a4 ------------------------ SHA-1: b18e2bf2619ce2f55daf8d4dcc3db29d071ac5a4 [ESGB-992] Alar/Jalpa. Change the version number to 91.4.3 SHA-1: 8026734132dcd903304cb8e9a1302e2f679eb565 [JIT-135848] Need BIOS support to keep PCie Gen3 slot speed train to Gen3 only. - correct Gen3/4 speed in some configurations. SHA-1: 67146369cd428230ac5e3c47d8a6223182bc4b44 [ESGB-992] Add PlatformDxe driver to do platform specific tasks in during DXE or later UEFI phase. - Define GUID to tag memory allocation HOB which is created for copied FV in PEI phase. SHA-1: 61c4c25abfc6d39c5c1f0756a184f001c57c6641 [ESGB-1491] Cordoba: Suppress noisy, superfluous serial output from Device Config Error Log hob generator driver SHA-1: 04d8911386b39ccbc76eab686ba27e99e1ee6f88 [JIT-137363] Jalpa C4 PCIe Link Speed Downtrain not reported correctly. Issue was caused for a bug on the variables used to print the speed message. Fixed to used the correct variable. SHA-1: 9e5e990863cba70c3d2884cada10ab9b8169e1de [JIT-137868] 15G-AMD-Reventon: WorkloadProfile Attribute Not Available SHA-1: d616bf8748e0d52d32e206d112afdddea6d6e8bf [ESGB-994] Updated IDRAC proxy WriteSPDBlock behaviors to be similar with Intel SMBUS direct access behaviors. SHA-1: f698ede056ae959a11e42694b0ab0c5b2ae5c6e5 [ESGB-994] Updated CommandData and ResponseData value for DIMM access command with correct offset to avoid any unexpected failure. SHA-1: 1e96ab644a82d12e79630266a8a0350f2d02478f [ESGB-1596] Cordoba cleanup platform description SHA-1: cec763c8a740888bb9b43184f9cc5d38995ca300 ESGB-1611 : Integrate iDRAC HII driver - iDRAC-HII Sirius X05 (SWB# 133DR X05) JIT-134410 - [3.40.40.40] iDRAC-HII CSSD library Integration - CSSD 7.0 BLD 0005 release [updated]+ DHP Message logging. SHA-1: 9417de91f340ff4fc3fe387aaa671494f5f30e40 [ESGB-994] Enhanced ReadSPDBlock behaviors with additional check to ensure SPD offset must be within the same page and updated the data size remaining for the oversize of packet length greater than 128 bytes. SHA-1: badfb540bf4c19fec3d1d8457b2f7e2e9b5709f7 JIT-130263 [Alar/Jalpa] Windows HLK will detect "System Audio" related items in WS2016 Cerification. SHA-1: 4873a99a6d11f95edd7eecfb06fb1ef987dd2009 JIT-136811 [R&S] System can't save Asset Tag value with 63 characters. - Revert "JIT-136811 [R&S] System can't save Asset Tag value with 63 characters." SHA-1: c96d4109a373ecb537f342a341965a7ff711c1e7 [ESGB-886] Check if the header of firmware volume for previous boot log is still valid, if it is invalid or corrupted, try to recover from primary ROM. SHA-1: b60c5942da574c5af45d5721990daa72f84f50ab ESGB-1313: [16G] send SCP by JSON format to iDRAC in base configuration SHA-1: e59937a51a3c127d916733802163454418cad245 [ESGB-994] Allowed only max of 128 bytes per each IPMI transaction for DIMM Access information to avoid any buffer size overflown per IDRAC IPMI requirements. SHA-1: 445b3c31276b7e772b54ae06047df286920ffd50 [JIT-135848] DXIO LinkSpeedCapability update based on Platform LinkSpeed information SHA-1: 195ae9b2702c411b682fc4d008e5fe405fbc41fa [ESGB-1648] Add BIOS - iDrac certificate sync driver. SHA-1: 181ea85b5cfb5697acac59846ce5749317118caa [ESGB-886] gray out X2APIC option when number of cpu thread larger than 255 (cont.) - Null pointer check to prevent RSOD SHA-1: 074b7e3a9e828c2add122b02a66bb5455455e38d JIT-136811 [R&S] System can't save Asset Tag value with 63 characters. - Adding data size for NULL when setting NVRAM config data with a string. SHA-1: 586264f5873b8b6350a8126795ce53900b0caffb [JIT-136408] Fix an issue where gBS is used when sending IPMI command in SMM mode, causing a hang. Using the right MACRO IPMI_SMM to separate the code. SHA-1: cb0c598ec4daa544144fabf1057f06980b6bc61f [ESGB-994] Updated IPMI Asynchronous transaction behaviors and skipped reporting non-zero response TransactionID to avoid unexpected IDRAC failure(s) since BIOS will not attempt any retries for any I2C communication errors during OS Run-time due to SMM latency concern. Also enhanced debugging information for future validation purposes. SHA-1: 0e0b25683274f7ea3d591b504c921e27602d2f9d [JIT-136408] Fix an issue where gBS is used when sending IPMI command in SMM mode, causing a hang. SHA-1: 4f41c151cabbf375f93a60b225d8c29bbaf21999 [ESGB-1586][UEFI-170][StorageBIOS] add reset at end of boot order to legacy boot SHA-1: c66e42d83446d1e14b37e8aeb3a0c9d569f52169 [JIT-130018] Fix issue with SPD Last Boot Reason being logged incorrectly SHA-1: f3204754f916114f725dc9db7800f7ebc257a003 [JIT-135848]Need BIOS support to keep PCie Gen3 slot speed train to Gen3 only SHA-1: f48f47266776506fa13b90779ac272a233e934b2 [ESGB-992] Fix a compiler error when build flag DEBUG_MENU_ENABLE is FALSE. **************************************************************************** - Version: 0.4.2 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 6/15/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.0 RC3 for Family 17h * ABL Firmware Version: RABLSSP10002011 * PSP Firmware Version: 00.0C.00.63 * SMU Firmware Version: 36.70.0 * DXIO Firmware Version : 36.605 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0-0006 * iDRAC-HII Sirius X04 (SWB# 133DR X04) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-136616 Dependency rule missing from BIOS data xml for Slot Bifurication settings 2. Fix JIT-136830 BIOS pops up a saving Changes error message when disabling Hardware Prefetcher function 3. Update Code Base to version SHA-1: 7864ee5f390eeab756b5a0fdce07e8872aa16fc5 ------------------------ SHA-1: 181ea85b5cfb5697acac59846ce5749317118caa [ESGB-886] gray out X2APIC option when number of cpu thread larger than 255 (cont.) - Null pointer check to prevent RSOD SHA-1: 7864ee5f390eeab756b5a0fdce07e8872aa16fc5 [ESGB-992] Alar/Jalpa. Change the version number to 91.4.1 SHA-1: ff6fa196b46a968ffd4b816546a58aefc939d995 JIT-135833 [Roadster_PT] Redundant OS Location shows the same selection with BIOS 0.3.10 SHA-1: ec594fbc68f0b975695bacc1b19daf04710b4b30 [ESGB-992] Alar/Jalpa. CPI of SHA-1: 7a9f1f8e3eb0e500afcb82986096538f0b7f05a3 SHA-1: 7a9f1f8e3eb0e500afcb82986096538f0b7f05a3 [ESGB-663] Pci Resource Conflict Resolution. Add depex for DpiPci2 to be loaded after PciChipsetInitPeim. SHA-1: ff650d11edb27332d099116fe9a1ee87f23e9663 [ESGB-1320] Integrate the 6.0.0-0006 S150 binaries for Sirius platforms SHA-1: 1feee6a612f84ac043cc964dc5a1f4ee2fb746b2 ESGB-886 make CPPC work on both linear mode and roundrobin mode SHA-1: a00c2f8704a4eebeb2eb3fe8db1b79eba8fff997 [ESGB-1010] HiiSetupPkg: Force System Profile to a pull-down list SHA-1: a37f17cab70c286bd31b501757943fb2c7c4e00b [JIT-136616] Dependency rule missing from BIOS data xml for Slot Bifurication settings SHA-1: f43e64c6cd3991bbc1cbdc1c985106d898df021b, 5f9ee45febdd12b71dc3a6dae7e2cdab69fabd07 [JIT-136846] Minotaur: CPU Stepping information display inconsistent across BIOS & OS. - The issue is caused by buffer overflow when calling UnicodeValueToString() - The code change also fix other potential issues which use UnicodeValueToString() in system BIOS setup According to the EDK2 design - UnicodeValueToString (Buffer, Flags, Value, Width) The parameter Buffer is a pointer to a Null-terminated Unicode string which means its size should larger than ((Width + 1) * sizeof (CHAR16)) in bytes. SHA-1: 9a0b73cb5ff56bc251f4405527b406283bf212a7 [ESGB-583] FP3: return EFI_NOT_FOUND when no forms was found in Fp3.DellProcessForms() or Fp3.DellProcessFormsDefault() SHA-1: 587fb88fd0c2e04bbce57d59eec7d893735b9e90 [ESGB-1010] Rename HiiAttributeMapping.UpdateAttributes to HiiAttributeMapping.ReadAttributeDefault SHA-1: 68721c67532fe3574ed5acbd4b3a7cfb0a734a36 [ESGB-1010] HiiBrowser: Display a error popup message when fail to jump to a target formset with EFI_IFR_REF4. The previous behavior is go to parent formset without displaying any message when fail to jump to a new formset. The new behavior is to display a popup message before go to parent formset. SHA-1: 16cff0fc59d6300d827aa4511b7fb63ed5b33188 [ESGB-994] Enhanced DIMM location search algorithm when logging ECC information to the DIMM. Fixed ROSD issue when injecting CE via IDRAC proxy interface in OS Run-time. Updated delay for SmbusExecute IoDone behavior to avoid any timming issues occurred during SMM SMBUS host communication. SHA-1: cf7b46c43e016034b73a047664e540821a87a7bf [ESGB-994] Added additional completion codes support to monitor the failures responded from DIMM access command information. SHA-1: 66efa7545d359bb637ecb542b3f5b068fd5612a1 [ESGB-1137, ESGB-1138] Cordoba: Implement Cordoba payload ver 1 riser and floating device workaround for lane reversed cabled sources SHA-1: 13a15a503c95cc3a5b03cab4d26a9b5fe1738d02 [ESGB-1001] ROME SPI Development. Clean up debug message. SHA-1: 84c6e6ea72270ff53fc04dbee789d69f1c885f7a [JIT-136830]BIOS pops up a saving Changes error message when disabling Hardware Prefetcher function SHA-1: 7e414a6e8fec6ee1c3a9f0b00fa1ba48e8adb39d ESGB-1611 : Integrate iDRAC HII driver - iDRAC-HII Sirius X04 (SWB# 133DR X04). JIT-135900 : Disable Accept Current Config from HII screen if config val is disabled. SHA-1: 395bca8227e98df7edfffbd3a612ac5712f27583 JIT-127424 - 15G-Reventon-PrePT- Storage operations are failing due to CSIOR Issue. SHA-1: 43060cefa1ae13c31367ec44c706a388b78b7515 [ESGB-994] Updated last packet information to use correct response data byte defined for GetDimmInfo and SetDimmInfo commands. Added additional check to validate invalid data from packet data information to avoid any unexpected ROSD issues. SHA-1: f2b074ae187189b7ce6f1799a95438b162595c6c [ESGB-663] Pci Resource Conflict Resolution. Use the gDellIpmiTransportProtocolGuid to register the callback instead of gDellPostErrorMessageProtocolGuid because the RegisterPostErrorMessage() will fail if the earlier is not installed. The earlier is usually installed before the later. SHA-1: b8dfdeb920de68f0a8c9cdb90469718b71bcbf54 [ESGB-997] Mehlow - Fix the incorrect HII information for CPU's Family-Model-Stepping SHA-1: 576503f2574083717a65c3b3734a3e9a6de7254d [ESGB-994] Update DellCpuSPDAccessSmmLib from AmdRomePkg with new FILE GUID to avoid unexpected issues generated from the duplicated GUID from SkylakePkg. SHA-1: 9c8d6edcfad4588c07e3263cb772ec007aa3adb9 [ESGB-1584] Support DELL_SPLIT_ROM Enable/Disable for Sirius SHA-1: b6e2719d47ca5ec81fe0928053fad90aa8688668 [ESGB-1139] Cordoba: Prevent infinite loop from occurring if a device description reports 0 connections associated with it Loop counter is unsigned and a - 1 operation is occurring. If the count is 0 then 0 - 1 = UINTN_MAX. So i < UINTN_MAX will always be true. SHA-1: 8ef14c49b56498c81bc20c4631b3e738e1d535a6 [ESGB-1604] Added a wrapper library to call the Dell telemetry protocol to send info to iDRAC. Currently disabled while waiting for iDRAC support Usage: TelemetryLogAscii(LogType, "String to be send %d", parameters) SHA-1: ce60bf8bab99a6b6f1fe87c98dee21961b029f46 [ESGB-663] Pci Resource Conflict Resolution. Display separate message to let users know we run out of MMIO or IO resources for PCIe devices. SHA-1: 2a2960f57c0e7376528d5d56d279bb736a37f381, 1909f2bbbdc3b74c4c4465ceb58ccc20b36e8a55, b6ff7827db38677b2ec7bfdb76b8e12d4f044cc1, d0da588a079f333ffcd6100654805b12125015f1 [ESGB-992] Implement PPT, PlatformLimit PPT and PlatformLimit TDP for CPU can approach Max power to reach higher performance. SHA-1: ebed7471f18e387675f3929901544d6d98f63025 [JIT-136360] Reventon: System will not BOOT after setting Custom System Profile -mApcbDxeServiceProtocol->ApcbGetTokenBool() was removed from DellOverlayLib.c. Call was placed back in SHA-1: 51aaa1f91a219db1c5a41c72531bd821b5445510 [ESGB-1318] TPM Firmware Update using embedded FMP driver. Improved TPM logging - Customer friendly logging message. SHA-1: eb5e4e0a7d20101c8eaaa2510de837f9e589babb [ESGB-886] gray out X2APIC option when number of cpu thread larger than 255 SHA-1: b56eff32dd97afe75094e8871f050f5c7f928a86 [ESGB-1316] Added F1/F2 error messaging for failed NPS profile SHA-1: 15e99fb2477fb6c69cfab1eaa12fc6b76acf3bc0 [ESGB-886] display number of active core for ROME based on CCD and CCX, this patch add back the code which missed during HII package porting SHA-1: 67b8d4560a9c149a63a7aa26d3c053808436aad3 [JIT-109965] Update PIECreator for BIOS release. SHA-1: 7a081377ff1bb603f723ea8ccb15169e735128c6 [JIT-134569] CSM - Fix ESXi 6.7 U2 hits PSOD on ROME SHA-1: b418be455f9c0e71f1bd43232832505aa7bb0fd4 [ESGB-663] Pci Resource Conflict Resolution. Fix Alar build SHA-1: f34c800b340415d4fbd4b19e75c1cfb69296b7c0 [ESGB-663] Pci Resource Conflict Resolution. Add support to do the followings when there is not enough resource: 1. Disable all the PCIe slots in the system. 2. Display F1F2 error message showing we run out of resource. SHA-1: 1efc9ed1dbc4dbadd962c36589007769a15d0e22 [ESGB-1573] Rome2S - Create new BIOS signing key for 15G. -BIOS only authenticates updates signed with Sirius (15G) key. **************************************************************************** - Version: 0.4.0 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 6/6/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.0 RC3 for Family 17h * ABL Firmware Version: RABLSSP10002011 * PSP Firmware Version: 00.0C.00.63 * SMU Firmware Version: 36.70.0 * DXIO Firmware Version : 36.605 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0-0005 * iDRAC-HII Sirius X03 (SWB# 133DR X03) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-136123 [Alar/Jalpa] BIOS 0.3.18 with PERC can't find the SATA ODD 2. Update Code Base to version SHA-1: 71e071e8629ba0536ecfe4c037e507bd43a1ea00 ------------------------ SHA-1: b6ff7827db38677b2ec7bfdb76b8e12d4f044cc1, d0da588a079f333ffcd6100654805b12125015f1 [ESGB-992] Implement PPT, PlatformLimit PPT and PlatformLimit TDP for CPU can approach Max power to reach higher performance. SHA-1: 1a2bdfb7094c9a2c3b6f0eed04336c2c722288c9 [ESGB-992] Alar/Jalpa. Change the version number to 91.4.0 SHA-1: 8888eb542c8fa04afeee7e91e6354aac8cd70e23 JIT-133320 COMMs_Broadcom_Sophie - iSCSI Connection 1 info are not listing in IDRAC GUI - BIOS Settings - ISCSI Connection 1 settings SHA-1: 84f388f0c95792f1d15c68bf06d31827a1134723 [JIT-135578] Display Bay and Slot information for NVMe drives in case of PCIe down train SHA-1: 51daec8ad7b592b2d2a622fc21be69cbad284922 JIT-136123 [Alar/Jalpa] BIOS 0.3.18 with PERC can't find the SATA ODD. - correct ODD to port 1 in mini-PERC configuration SHA-1: 0c4e3d9f783ca424486970f150b26df6c29a8a55 [ESGB-1499] Added additional retry for SmbusExecute when failing switching the SPD page. SHA-1: e24598d4ecdb2c7aa21ba9cd94bcfa4eba23355a [ESGB-1499] Increased the delay when issuing another IoWrite operation when DERR register returns non-successful status to resolve unexpected failure. SHA-1: 77c3fab93a31ec909201817fd4d5f59fc8b7b81d [ESGB-1318] TPM Firmware Update using embedded FMP driver SHA-1: 83a7a5b56c35ad05313a0d59a43522e201a3a38a [ESGB-1316] Added NPS protocol to AMD CPU lib to pass NPS profile support to HII processor BIOS Setup. SHA-1: 5bde795bf3fce59223d3f2a98a39bcd0ff1cc4d4 [ESGB-1139] Cordoba: Fix ModularityCore's uint to unicode string function. Now properly handles digits in the 'A-F' range **************************************************************************** - Version: 0.3.18 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 6/3/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.0 RC3 for Family 17h * ABL Firmware Version: RABLSSP10002011 * PSP Firmware Version: 00.0C.00.63 * SMU Firmware Version: 36.70.0 * DXIO Firmware Version : 36.605 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0-0005 * iDRAC-HII Sirius X03 (SWB# 133DR X03) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 1.0.0.0 RC3 2. Fix JIT-129861 [JALPA C3] Incorrect NMI Behavior 3. Fix JIT-134954 Alar Audit PT: UEFI SCT test failed with multiple error Error on R6515 4. Fix JIT-132512 OM931:OMSS: R7515 S150 NVME physical disk hot insert and removal not reflecting in Device manager under S150 and OMSA storage page as well 5. Fix JIT-132167 SWRAID6.0: Jalpa C4 NVMe: Drive removal causes OS BSOD (critical process died) 6. Fix JIT-126424 SWRAID 6.0: OS - BCADM : Hot Insertion in OS is not reflecting immediately. 7. Fix JIT-133585 [Jalpa] After hot remove one PCIe SSD device,other NVME PCIe SSD at the same Bay will disappear. 8. Fix JIT-133593 [Jalpa] System cannot detected the hot insert NVMe PCIe SSD device. 9. Fix JIT-135817 15G-ALAR_Storage-PT: RSOD observed on ALAR server with BIOS halt error in LC log 10. Update Code Base to version SHA-1: 71e071e8629ba0536ecfe4c037e507bd43a1ea00 ------------------------ SHA-1: 71e071e8629ba0536ecfe4c037e507bd43a1ea00 [ESGB-992] Alar/Jalpa. Change the version number to 91.3.18 SHA-1: 404d3a228c4b00d3724b508ebf30def0f01536f3 [ESGB-1137] Cordoba: Remove assert when parsing riser/floating payloads that describe riser routings with incorrect information SHA-1: 56b99503fb1ff10ad6acf18fdc99b3c8c9334627 [ESGB-1102] AGESA 1000 RC3 Integration PART 1 SHA-1: a2c51c8fc49bb03c7e30b54a5b870c9edc81ef66 [ESGB-1316] Created protocol for NPS profiles by other drivers SHA-1: 7adea14c96023dea836502efb218f81548bb5223 ESGB-1102 AGESA 1000RC2 integration PART 2 RAS feature SHA-1: d97a6d93393ada3b1ada76cc5bf5b3358fd0c491 [JIT-131619] 15G: SWPT: Roadster: Observed RSOD after updating iDRAC to X26 and AC Cycled the system. SHA-1: a1b5b9594a56dbff5b758f7e23c1ddd1cc8b671f [ESGB-1102] AGESA 1000 RC2 Integration PART 1 SHA-1: 3a1b0e2881fa7d93a0cc2ff47fbd449cb7d2961a JIT-129861 bugfix for Incorrect NMI Behavior, disable eDPC configuration. SHA-1: b4a08aeca0dbba403036c9166cb8124f43d5be3a [JIT-134954] Alar Audit PT: UEFI SCT test failed with multiple error Error on R6515. Fix AllocatePages test failure. - Skip the workaround for ESXi OBOE issue when check RMRR (IVMD) is overlapped by other memory type. SHA-1: 8b0ace51e1b12f871ae28e507e6fbfc52f952e2a [JIT-131271] [R&S] BIOS can flash to the same version under shell without command "-forceit". Define the write-protected regions correctly and duplicate them from upper 16MB to lower 16mb. SHA-1: 7d91e0efdbbdb2b098eb7cc289d62030d8e22085 [ESGB-1499] * Updated SMM CheckSlaveStatus behavior with additional FixedDelay to be similar like SMBUS DXE behavior from AgesaModulePkg code. * Updated SMM SuccessfulCompletion behaviors with a break when switching between bus operation. * Displayed page information when switching the MUX selection. SHA-1: febb39f7d323ad6a1980ac22f7908a0621d64ce9 [ESGB-1499] Updated AgesaModule to handle IoDone behaviors with additional retry Check BootOrder is present before accessing it. SHA-1: 0b730707cbe49af6dc858d76d027a8744c805e60 [ESGB-1499] Removed SMBUS_TIMEOUT and IoDoneDelay SMBUS behaviors from Intel temporary. Updated SMBUS_DEBUG messages applicable to the error conditions for debug purposes only. SHA-1: 2b4419bf24b5e632fb771ffee5b64e74658480a1 [ESGB-829] Add manual override to the cTDP option in the Debug menu SHA-1: ab6bc5ff1c56650831e65a4b92a20ab0b783dd8a JIT-132321 reverse back part of the code checkin with be316f0a649329f0569732ec85ff40905cd46431, to make the PState as thread based **************************************************************************** - Version: 0.3.17 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 5/30/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.0 RC1 for Family 17h * ABL Firmware Version: RABLSSP10002010 * PSP Firmware Version: 00.0C.00.5F * SMU Firmware Version: 36.69.0 * DXIO Firmware Version : 36.602 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0-0005 * iDRAC-HII Sirius X03 (SWB# 133DR X03) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-132321 [Alar/Jalpa]Windows OS will crash after down core CPU with BIOS 0.3.13. 2. Fix JIT-132467 [Toshiba:CD5] SlotType field in iDRAC GUI -> Hardware Inventory shows the value as "0000" in R7515 (Jalpa) 3. Fix JIT-132040 Alar Audit PT: Missing Memory Interleaving option from drop down menu in BIOS Setup 4. Fix JIT-131230 [Alar] TPM PCR0 value of SHA1 & SHA256 is different after change system configuration 5. Fix JIT-134557 SW_RAID:6.0_15G: Dynamic port mapping in Alar SATA Configuration 6. Fix JIT-135276 15G: SWPT:: 13G Attribute in BIOS Miscellaneous settings which was not showing in 14G is displayed in 15G 7. Fix JIT-130593 [JALPA C3] _HPX Not Working in ESXi 8. Update Code Base to version SHA-1: 4b6ebc612fb8c22516eb0795f0c1cae6559b457d ------------------------ SHA-1: 4b6ebc612fb8c22516eb0795f0c1cae6559b457d [ESGB-992] Alar/Jalpa. Change the version number to 91.3.17 SHA-1: 6d0824a16ce12e61551e9fd2fdaff72929c16e81 [JIT-134257] H345_50.09.0-2648 HII RSOD while Converting Non-Raid PD to Raid Capable. - Add check if storage exist to fix RSOD SHA-1: 511e3f1a86f903a6623529ae450e65a56b7c93b3 [ESGB-1490] AMD ROME A0 and B0 processor support. AMD ROME 32MB BIOS is created by coping upper 16MB to lower 16MB and the write-protected region is ONLY specified in upper 16MB in PlatformConfig.txt. Due to the lack of WP regions in lower 16MB defined, adding change to duplicate the WP regions from upper 16MB to lower 16MB SHA-1: 52c49ba690f20d4833b5bfc556c7aa5c412c9a90 [ESGB-785] SPI - BIOS Update. - When flash data is not memory mapped in 4G-16MB, using DELL SPI Wrapper protocol to read flash data. - Always using DELL SPI Wrapper protocol to read flash data if the system is dual ROMs design. SHA-1: 61aa4851ed7981a0be257b2ab893450dac0bac93 [ESGB-992] Alar/Jalpa. Support eSATA configuration for Hotplug. SHA-1: 8d40e82ef5dd72097f84470b86b2a8d7bc450511 [JIT-118104][Reventon] AHCI display incorrectly in iDRAC GUI/Firmware Inventory. Add the ATA/AHCI controller related entries in mRomePciTable[] for generating AHCI FQDD. SHA-1: 0e77dccc64359e777599b7e72acedde2e8bc5cdf [JIT-131964] NULL terminator is added later in varstore, no need to include it in IP str size. SHA-1: 9427c1eb16090103a9853d1af1a6ac9ebefaf402 [ESGB-1139] Cordoba: Improve modularity core output variable name to be better and more easily understood. ConnectorLane -> LinkWidth SHA-1: 1eb312213a22d1a58d7bea0c28d68500ed66e3b9 [ESGB-1136] Cordoba Chipset Description: Modified the define for AMD_ROME Cpu to help with Intel implementation of Cordoba feature SHA-1: edbb3260733256bff6edffe1db7e252a2339cfab [ESGB-1136] Rome Chipset Initializtion: Using width value from Core Analyzer instead of calculating it based on Start/End Lanes There is an bug in Chipset Initialization (PciChipsetInitPeim.c) when Ports infomration coming from Core analyzer is not ordered by Lane Number, this cause the calculation of Width to set invalid LinkWidth values. SHA-1: 86c44c7a4b2562d5464960c26a907f25e4f11490 [JIT-135276]:JIRA Issue TrackerJIT-135276. 15G: SWPT:: 13G Attribute in BIOS Miscellaneous settings which was not showing in 14G is displayed in 15G -Feature flag update fail after HII new module code, PlatformDPI protocol have be locate before feature flag update. SHA-1: 4b05d1ba41672d4c54c54ad6eed1da3b7263904b [ESGB-1631] [Alar/Jalpa] SMBIOS Type 9 - OCP slot length. Mezzanine Slot length should be "SlotLengthLong", not "SlotLengthShort". SHA-1: 5041c8af8907fd0a1ced767bada76ecc4a359cb3 [JIT-131230] [Alar] TPM PCR0 value of SHA1 & SHA256 is different after change system configuration. Clean global variable before TPM measure PEI2 FV. Since PEI2 FV will run from DRAM on AMD platform so if any global variable within a module has been updated, it will result in this difference. Due to the heap limitation before memory ready, PEIM DellChipsetMemInfoPeim which is ran before permanent memory will use global variable as its internal cache for DIMM population information and the value will be updated before TPM measure PEI2 FV, that's why the PCR0 value is changed between different DIMM populated. Fix this issue by zeroing the global variable so the PEI2 FV will keep consistence regardless of DIMM number. SHA-1: b55063850b8a20eee29cab334324f1e6ebcbcc7a [JIT-134697] [Roadster PT] BIOS doesn't load default after BIOS features are wiped clean in lifecycle controller. Erase the correct regions for BIOS NVRAM attribute and EFI variable store in data ROM. SHA-1: 5e4205e5dea701f9b1b2ad354ab976617647d686 [ESGB-1316] Remove Memory interleaving option from Memory Menu and move it to Debug Menu. SHA-1: 208a500a2a49f027269bd8297295ae9073bd25f6 ESGB-1611 : Integrate iDRAC HII driver - iDRAC-HII Sirius X03 (SWB# 133DR X03) JIT-131309 : [3.40.40.40] LCUI - AMD ROME L10n Drops [Updating iDRAC-HII Translations for OCP 3.0 and Configuration Validation]. JIT-134410 : [3.40.40.40] iDRAC-HII CSSD library Integration - CSSD 7.0 BLD 0004 release. SHA-1: be316f0a649329f0569732ec85ff40905cd46431 JIT-132321 bugfix for [Alar/Jalpha]windows OS will crash after down core CPU with BIOS 0.3.13 SHA-1: 7af3da8a74acec17b8a594aa07085922e35d57dc [JIT-130593] [JALPA C3] _HPX Not Working in ESXi. - Remove incorrect hpx_naples.asi inclusion under PLX downstream port device scope declarations SHA-1: 28fd6f01e4eaf59dc85e8eb8b48b916e7485acde [JIT-132467] [Toshiba:CD5] SlotType field in iDRAC GUI -> Hardware Inventory shows the value as "0000" in R7515 (Jalpa) Set SlotType as 'Other' since SMBIOS v3.2.0 does not define specific values for Gen4 operation. SHA-1: 653617d7ab857944bdaad27bc3d131e9019caeb5 [ESGB-1217] Cordoba: Implement dynamic backplane hot plug detection workaround The workaround sets all PCIe devices from a backplane connected directly to the motherboard as being hotplug capable. This is needed because current backplane SEP FW erroneously always sets hotplug as disabled for all connectors **************************************************************************** - Version: 0.3.16 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 5/24/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 1.0.0.0 RC1 for Family 17h * ABL Firmware Version: RABLSSP10002010 * PSP Firmware Version: 00.0C.00.5F * SMU Firmware Version: 36.69.0 * DXIO Firmware Version : 36.602 * uCode : A0-08300027/B0-0830101C * S150 Firmware Version: 6.0.0-0005 * iDRAC-HII Sirius X02 (SWB# 133DR X02) ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) 7. Windows 2016/2019 need to have patch or newer version or need to set x2APIC option (in Processor Settings page) 'Disabled' to prevent boot hang logo or install fail. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 1.0.0.0 RC1 2. Fix JIT-133638 15G:SWPT:Alar: Inventory is showing as "PCIe SSD in Slot 255 in Bay 2" 3. Fix JIT-134075 15G_AMD- Observed RSOD "DellHiiAttributeMappingDxe" during Bios Configuration SSM task on R6515 4. Fix JIT-133031 [Alar] Alar Configuration-3 NVMe Slot & Bay information incorrect in BIOS men 5. Fix JIT-133918 15G:SWPT:Alar: PCIeSSD slot information is mismatch from HII and GUI inventory page 6. Fix JIT-133922 [Alar/Jalpa] SMBIOS Type 9 - OCP slot length information is incorrect 7. Update Code Base to version SHA-1: d6d337366efeac0932fe0303388203713cc3a416 ------------------------ SHA-1: d6d337366efeac0932fe0303388203713cc3a416 [ESGB-992] Alar/Jalpa. Change the version number to 91.3.16 SHA-1: 06a48f15c7f9e7f1823c21d793b3886a22b73125 [JIT-133922] [Alar/Jalpa] SMBIOS Type 9 - OCP slot length information is incorrect -Delete FixUpSlotLength functions in Roaster/Sesto. -Modified the FixUpSlotLength function to fix up Mezz Slot Length in Alar. SHA-1: beaed68b2cb9b3f8e99600c7cdee3ef7d4cd6f9b [JIT-128897] Consume SHA384 hash instance on Laguna Seca. (cherry picked from commit 2e792aeb5bd6499235f8407fcf2f91594f60ac74) SHA-1: 6e7b0cda553bc7ec7a381742efa41e1528564007 JIT-126765 Comms_QLogic_Suburbia: Incorrect device naming for embedded and integrated cards in RHEL 8 RC2 in Roadster server. SHA-1: 34afcf19b3049154277d1931fcd300e91507d78e [JIT-134075] 15G_AMD- Observed RSOD "DellHiiAttributeMappingDxe" during Bios Configuration SSM task on R6515. SHA-1: a9f556440238fe6bcd80f7ffae2fd8145e627437 [ESGB-1318] TPM Firmware Update using embedded FMP driver SHA-1: e59a8b90d04203073f16da846dbf006c2b675e86 [ESGB-1102] AGESA 1000 RC1 Integration PART 4. Fix Linux boot fail issue. SHA-1: 63b59ae3981cda058632a515c3ccdea0b166be84 JIT-130074 [Roadster_PT] Redundant OS doesn't show SD card in selection with BIOS 0.3.5 - Get feature flag InternalUSBPortSupport from HII_INTEGRATED_DEV_FEATURE_SUPPORT_VARSTORE. SHA-1: 7a004a5bce096705739019efe4183e9e648a4045 [JIT-128897] Separate the solution to only apply to Intel 15G so TPM can be detected on for example 15G AMD. This commit is for seperating the changes introduced in commit 27170c7ac1. SHA-1: cd6a9f5391829f4636e3f0fefa51184239af3da3 [JIT-119671] Parcial fix for PCIe Gen4 cards seen as PCIe Gen3 by iDRAC. Full fix will be delivered later by Cordoba team SHA-1: fc40c8f1398875c7fb77edafa6825e7ebd58e7be [ESGB-1499] SMBUS Access interface * Update SMM SMBUS Access interface to add IoDoneDelay behaviors leveraged from Intel SMBUS access code to handle future time-out issues occurred when accessing SMBUS from AMD code. * Update DXE SMBUS access interface to allow additional retry for SmbusExecute behavior and fix the time-out issue occurred during page switching. SHA-1: 1e660c7ec4e785403cc71ffab560f1a49b97848a [JIT-134149] Adding Serial debug messages to print ThrottleCtrl SMN register values for each UMC SHA-1: 5b3fb86d75562ea9119c816ac92c1167aa79bd52 [ESGB-1057] : Hotplug and basic NVMe enablement changes for Reventon configs: x2, x10, x10+x2 and x4 universal > Hot plug descriptor fixes for x10 Slot 8 & 9 reversal, hot plug now working on these slots. > Fix logic for detecting x4 universal configuration. SHA-1: f9018491636e51ba9261127a83f1bb9d9120d458 [ESGB-1057] - Revert part of the WA for x10 NVMe Alar configuration. AGESA 1.0.0.0 RC1 fixes the issue with unused lanes in P1, so this fix must be released when AGESA update gets released SHA-1: 1dd4b24a81e7fec76965e0a7fae678fa7cb8d7df [ESGB-994] Updated IDRAC Proxy DIMM Access IPMI interface and not to return device error status with Zero value responded from ResponseTransactionID and continue with SPD logging procedure. Checked for NULL pointer from input paramters to avoid unexpected ROSD issues. Added SPD debug messages for the error scenarios only in order to identify the error for this feature and those can be easily removed if necessary when full validation is completed. SHA-1: 5f4a116f505be7df6a2504f502985f8b29bf5d8a [ESGB-674] ACPI. Symptom: BSOD SYSTEM_THREAD_EXCEPTION_NOT_HANDLED observed during Windows boot. RootCause: 1. Code missing during merge. 2. AMD AGESA Coding error, only define 64 for MAX_CORE_NUMBER_PER_SOCKET Solution: 1. Add missing code back. 2. Set MAX_CORE_NUMBER_PER_SOCKET to 128 SHA-1: 635a7203710260bb5fa31745c725bb6faf67676a [ESGB-1579] DELL_HII_DEFAULTS_PROTOCOL update for 15G BIOS Setup. - Change to ConfigResp as browser do not support MultiConfigResp [ESGB-1199] 15G BIOS Setup Sub Drivers. - Change behavior in security sub-driver when handling TXT to make it same as 14G.- Add check if ConfigResp includes ConfigBody, if not then return EFI_NOT_FOUND SHA-1: 6cf28ff771e5557590171cd477c38b0e59798156 [JIT-134076] 15G-SWPT-Reventon: Observing: "DellInitialPPREntry", "DellAmdMemoryPPRSmmEntryPoint" messages are visible during the reboot of the host in SOL (console com2) through SSH SHA-1: abd8f4cfcb53a2752a67311e1130ac8b3c7f1c31 [JIT-128897] Separate the solution to only apply to Intel 15G so TPM can be detected on for example 15G AMD. SHA-1: d3142e2914f45560aa3ea0ba1ac63f0b940aa4e9 [ESGB-1573] Rome2S - Create new BIOS signing key for 15G. -Corrected error in 673ef927ac34e820adbab1838b6be9cd7f192ce6, fixed build issue. SHA-1: c5e19a0f3e85f3bbf1dc04b3a609f76f8a1768ab [JIT-133031] Revert previous fix from SHA-1: aa5423c854bd1e5dda04acafecd73f662d1fa878. The correct fix is to port changes from SHA-1: 3f2e8abccd9861ee63c6846e957d39f2a7facc66 SHA-1: aa5423c854bd1e5dda04acafecd73f662d1fa878 [JIT-133031] Fix incorrect Bay and Slot mappings for NVMe HII Change from SHA-1: a76f03f52e00f36b14e49080cfab9299f7ae80c8 removed some unused lanes, which shifted some function numbers for 2 of the NVMe ports. SHA-1: c52f27eb7f193de98af8f3a6b341144287a60b9a ESGB-1611 : Integrate iDRAC HII driver - iDRAC-HII Sirius X02 (SWB# 133DR X02).IDHII-92 - [IDHII_3.40.40.40] Backplane 2S Cordoba, HII Config Validation Support. SHA-1: 3ed22655a3ec6577523883bbacf3c78b5dbb31aa [ESGB-1499] Allow additional retry to get SMBUS ownership and execute SMBUS ProcessOperation when SMBUS DERR status register returns an error. This would be consistent behavior when checking BERR status register during SmbusExecute. SHA-1: f8961e675673ce40cb9358c352703436e099a3e2 [ESGB-1167] Build fix to atlaspkg. -AMD ONLY move clearing bit 4 of BMC_I2C_DIMM_MUX_EN_N to Idrac protocol when BIOS sends EOP to Idrac via IPMI SHA-1: 914890b27f34cb70af310f272582fe8da4ae713d [JIT-113367] - Fix bug introduced with DpiPCi cleanup check in where Public.Legacy.Static.DevicePath is getting printed before being initialized and also using the wrong data type to print it. Removing Debug message since value is printed later in function CollectPciStaticTable SHA-1: 93b77d318b44245bdfdf4a671eb6ef4eb2b1ee00 [ESGB-816] setup system security SEV ES * Accepts SEV ES states 1-253 or 1-510 as per processor limitation via numeric box. * Sets Agesa Token with the valid values added by user SHA-1: 3acaa228a0e16534eaff877d834bf966857d7b38 [ESGB-1167] move clearing bit 4 of BMC_I2C_DIMM_MUX_EN_N to Idrac protocol when BIOS sends EOP to Idrac via IPMI SHA-1: 54d526c3b2d58a6167c3b1b1e0d777a11baca595 ESGB-554 [WSMT Changes for 15G] -Disabled WSMT for Alar for iSM, tools readiness. SHA-1: 63801657265e226b250447ade151a3f4fd8ff66b [ESGB-1127, ESGB-1196] Cordoba: Implement external device description platform hook support. SHA-1: d898c05e78b9bf832a1176d797396f98478da219 [ESGB-1102] AGESA 1000 RC1 Integration PART 3 - RAS Overrides SHA-1: 5034feecd81fdfc6c45c91ec35852ec527e49e59 [ESGB-1573] Rome2S - Create new BIOS signing key for 15G. -Corrected error in 673ef927ac34e820adbab1838b6be9cd7f192ce6 SHA-1: 673ef927ac34e820adbab1838b6be9cd7f192ce6 [ESGB-1102] AGESA 1000 RC1 Integration PART 2. - APCB changes for ALAR SHA-1: 00c8ca6051c391e6f7a2178af1c5161038c6b5c6 [ESGB-1102] AGESA 1000 RC1 Integration PART 1. SHA-1: 481c4ccf689fd368ee8fca799e3191bd9c5e2b49 [ESGB-994] Added code to check for SPD bus done status via CPLD_OFFSET_0x16 - BMC_I2C_DIMM_MUX_EN_N (BIT4) prior any SPD Read and Write operation(s) for direct SMBUS access and/or IDRAC proxy DIMM access. **************************************************************************** - Version: 0.3.15 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 5/17/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.9.0 RC3 (NDA) for Family 17h * ABL Firmware Version: RABLSSP00812012 * PSP Firmware Version: 00.0C.00.5B * SMU Firmware Version: 36.67.0 * DXIO Firmware Version : 36.594 * uCode : A0-08300027/B0-0830101A * S150 Firmware Version: 6.0.0-0005 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-133097 System hang at booting windows 2019 OS if BIOS setup x2APIC option was enabled in BIOS 0.3.14 Workaround: Load BIOS default or manually set x2APIC option(in Processor Settings page) to disable Or install windows hotfix KB4493510 and KB4495667 before enabling x2APIC function ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-132059 Alar Audit PT: Miss match in Slot identification in the ESXi 6.7U2 OS 2. Fix JIT-133389 COMMs_Intel_Ramona - PCIe card placed in Slot 3 reflecting as SLOT 4 on top of ESX67U2 OS in UEFI Mode 3. Fix JIT-132304 [Alar/Jalpa]Some Help messages need to be revised 4. Fix JIT-133115 [Alar/Jalpa] System will hang in "Loading BIOS Driver" when the RTC remove and re-insert in bios 0.3.13 5. Fix JIT-132271 [Alar/Jalpa]RSOD generated when executing UEFI SCT v2.6 HII test 6. Fix JIT-132566 Alar Audit PT: No Error message at the Post when Coin Cell removed from the MB 7. Fix JIT-133749 15G: SWPT:: After the system erase BIOS gets stuck in Loading BIOS page and the system continues to boot if NVMe drives are removed 8. Fix JIT-133613 Alar Audit PT: BIOS got hung at 'Loading BIOS Drivers' page 9. Update Code Base to version SHA-1: f19917702217e71d01b9b67540111e9667c847ba ------------------------ SHA-1: f19917702217e71d01b9b67540111e9667c847ba [ESGB-992] Alar/Jalpa. Change the version number to 91.3.15 SHA-1: 661ceced5eb4276bd992d18c03e9ee3bf6472650 [JIT-132566] UEFI0034 error message can be saw when RTC really doesn't have power supply. SHA-1: c3dc280484f84418a299d07bceecd41dbb2a33bf [JIT-128897] Fix repeatedly reboot issue by not setting PcdTcg2HashAlgorithmBitmap to zero in both HashLibBaseCryptoRouter constructor in PEI and DXE phase. This enables users to activate PCR bank (algorithm) that is not registered with the said router without reboot issue. SHA-1: cd10c342cbb84a6fe2e9ebabe718adb828e05daa JIT-132988 - [Roadster_PT] Cannot boot into ESXi on SD card with BIOS 0.3.6. SHA-1: dd2a3970be72029af5c43bfee4e47e2833a5c31a [JIT-113367] - Fix bug introduced with DpiPCi cleanup check in where EmbeddedNIC disappears from BIOS menu after selecting Disable(OS) SHA-1: eb9290fc4c52e4fcb0ebd33c7ab696c4797bee7f ESGB-1321: added dummy functions to fix AMD build SHA-1: 6f943606f567c418ecbb0ee5699410ee7a4347f6 [ESGB-1604] Dell Telemetry feature for D4D Part 1 SHA-1: db6537a2cc70ebd0781b834c08bb47a75495ad0e ESGB-497: fixed AMD Sesto project BdsDxe drive no serial out issue SHA-1: 4e64b12aeb8adb87b898e640fa18b40b26bea4ca [ESGB-828] 14G MLK leaky bucket enhancements on AMD Rome Update IsWarnThresholdExceeded and IsCritThresholdExceeded flag before proceed LogCorrErrorToDimmSPD SHA-1: 3c91fa1302e184456aeec75be2d8c35381c5fdac [ESGB-992] Alar/Jalpa. Change token APCB_TOKEN_UID_ODTSCMDTHROTCYC_VALUE from 87 to 255 to make MemHot trigger 2xRefresh. SHA-1: 513043164aa32baad494485920993ce2e8da2f8b [JIT-132059] Alar Audit PT: Miss match in Slot identification in the ESXi 6.7U2 OS [JIT-133389] COMMs_Intel_Ramona - PCIe card placed in Slot 3 reflecting as SLOT 4 on top of ESX67U2 OS in UEFI Mode SHA-1: 03f45c8910e767d2b744ad8b8cbbcf76c0d97204 [JIT-132568] 15G:Reventon: SWPT : Duplicate nic slot seen from racadm and GUI. SHA-1: 292c6de67836e93dd156b2e0915911d4026753be [ESGB-1010] HiiSetupPkg: code cleanup - Remove unused GUIDs from [Protocols] and [Depex] section - Remove unused codes SHA-1: 6ed3ba50251b3aa9a2dc93346a6351a6a79a4c85 JIT-130405-[Roadster_PT] Memory Testing cannot abort while progress bar is filling. Add 10ms stall after each memory test step so the user can easily hit the space or ESC key to abort the memory test procedure. SHA-1: 684f956f23e8ca72a7ba941796ce754d50ace6fe ESGB-886 record memtest error to SEL SHA-1: 26e88282f0fadabe5c0218cfc79e68ee5ecf0b62 [ESGB-1094] Cordoba: Fix Alar/Jalpa NULL pointer bug in GetPlatformChassisInfo() Platform chassis accessor function did not check if the PlanarMinor parameter was NULL. It always assigned a value to PlanarMinor parameter. SHA-1: d0eae66c3cf716547cd45c8d71c83acc6dd8c978 ESGB-1035 Add updated localized string file. Minor updates to batch and AWK files. SHA-1: 5a233969ae9185549112e54823b0f7ffa130f4cb [ESGB-1204] Add dat comparing function into batches SHA-1: b3f5ba6cbab3bc050e92a9cf95c6b1d6a268d645 [ESGB-1010] HiiSetupPkg code cleanup - set physically present from AttributeMapping protocol instead of setting it from each driver - separate non chipset-dependent routines from DellHiiChipsetLib to DellHiiSetupLib - remove unused code SHA-1: b8adadff83209dacd3160bc0baf421fd27bb94c4 [JIT-132304] [Alar/Jalpa]Some Help messages need to be revised SHA-1: b23aa57e194c87c1b9fb4c904931c53e482608d0 [ESGB-1204] Implement dat file comparing tool SHA-1: 7bc907a1f2a3507b977b9c54cd8c29525d221b46 [JIT-132271] [Alar/Jalpa]RSOD generated when executing UEFI SCT v2.6 HII test. Return EFI_NOT_FOUND instead of ASSERT when no storage for question. SHA-1: ca06fb4037459b7bb8fabc68b95d809f55e6dd6e [JIT-133155] 15GSWPT-Roadster : System is hung at loading BIOS drivers after performing LCWipe. [JIT-133133] SUT hang at Loading BIOS Drivers during POST screen after remove the CMOS coin cell battery. SHA-1: ead164a1cb2acad2a99639c04688ce2a84ac68cb [ESGB-1316] NPS default profile change to NPS_4 remove AUTO as an option SHA-1: fac6752672125609c62e24b22f150def413855db [ESGB-886] Rome RAS: Memory error injection bug fix. Fix fail to update cumulative UE ECC error count SHA-1: 1b247a751026243a524f87ab9edd483849cbb82d ESGB-1573 Rome2S - Create new BIOS signing key for 15G SHA-1: ea96d5f3668787c5bc0a4ab7d8b5a5bf34cf1040 [ESGB-674] ACPI. Modify the CPUs order of "MADT Core Enumeration" "Linear" option to match AMD CRB design. SHA-1: 633f0ca0ebd27d82d75515cedb9854960f810eb0 [ESGB-1499] Updated SMBUS IoDone behavior to add a delay to avoid non successful response from BERR + DERR status registers during SmbusExecute operation. SHA-1: 01aa6d7b77ff4a1e2e1bfcf0e53759d7993dc43c [ESGB-1001][JIT-132173] Add data ROM second source w25q32fw into support table. SHA-1: a9d67a879d4827679d1597efb5fa2ee14c3cfc08 [ESGB-992] With new EDK2 build, putting SecCore and PeiCore in the same FV is not a requirement so remove the dummy PeiMain from BFV. SHA-1: 5f24e2a4a7a8035a01325c681f6b21e24bf2bc3c [JIT-113367] Removing unnecessary code since Cordoba Feature is now generating DpiPci Tables SHA-1: d9a7f76d4959150b88587eff956a421f869d288e [ESGB-1499]: Added switch bytes for SMBUS Read and Write Word operation. SHA-1: e83c6c9948e7b636162be36bdffb479571897356 [JIT-132615] : Restoring the MPS changes which got over written by recent Agesa merges. SHA-1: 5a7938a05c84a3c07d14c145ea14e092bf4eca32 [JIT-132460] Fix an issue causing iDRAC RoT to trigger BIOS recovery on a good BIOS. Modified AMD PSP region 38 as mutable in IIB. As this region contains data that change at runtime. SHA-1: 67d610be14f3d74d8e076869c842b355f82d6dbd [ESGB-1094] Cordoba: Add missing riser segment values to Alar/Jalpa platform table. This fixes the assert that occurs in the Core Stitcher SHA-1: b164fdf634449eeac37d3b3605c878386a27e491 ESGB-541: move SMA capsule update early for TPM update function in 15/16. HA-1: 461a4fa55101db0b7548476b229a7a7108b1bfa1 [ESGB-1196] Cordoba: Implement correct Cordoba payload parsing for all payload types. **************************************************************************** - Version: 0.3.14 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 5/10/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.9.0 RC3 (NDA) for Family 17h * ABL Firmware Version: RABLSSP00812012 * PSP Firmware Version: 00.0C.00.5B * SMU Firmware Version: 36.67.0 * DXIO Firmware Version : 36.594 * uCode : A0-08300027/B0-0830101A * S150 Firmware Version: 6.0.0-0005 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-132054 System hang at booting windows 2016/2019 OS if BIOS setup x2APIC option was enabled Workaround: Load BIOS default or manually set x2APIC option(in Processor Settings page) to disable after you update BIOS 0.3.14 ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. SWRAID S150 UEFI Firmware v6.0.0.0005 integration 2. Fix JIT-116331 [Alar/Jalpa] Verify Watchdog System Event Log is Fail. 3. Fix JIT-115726 [Jalpa] x24 NVMe SKU /w PERC - PCIe extender ID is incorrect in iDRAC HW inventory 4. Fix JIT-127081 15G:SWPT:Jalpa:PCIE extender gets listed in Jalpa in Hardware inventory which is not supported 5. Fix JIT-132852 15G: SWPT: ROME Alar: Load BIOS default options the x2APIC option was no longer present in the BIOS attribute selection 6. Fix JIT-129312 [Alar/Jalpa] Trigger the NBIO error fail. 7. Fix JIT-131705 [Alar/Jalpa] Cannot trigger Write Data CRC error through AMD RAS tool v1.6.7 8. Update Code Base to version SHA-1: 0483297042bf5cc06ae672fdfe6c32e04a4c4f0d ------------------------ SHA-1: 94d0361d5032d30f9fc3a58dc62091526f0f36a4 JIT-129312 [Alar/Jalpa] Trigger the NBIO error fail. Fix wrong address to access NBIOx's PARITY_ERROR_STATUS_CORR_GRP. Workaround that NBIO 2 or 3 where RAS_GLOBAL_STATUS is not valid SHA-1: 7113fa89a19f8862455e384cc8b32df76e09c49f JIT-132685 SWRAID S150 UEFI Firmware v6.0.0.0005 integration for Lagunaseca AMD Platforms SHA-1: a4b9e70445a3f73918629b059a1407f3add13ed1 JIT-131705 [Alar/Jalpa] Cannot trigger CRC error through AMD RAS tool v1.6.7. Add ROME Write Data CRC support to tie with attribute and System Profile SHA-1: 0483297042bf5cc06ae672fdfe6c32e04a4c4f0d [ESGB-1292] Display AMD Agesa Version SHA-1: fe4350cf5799d2481ddb5525b90bf36aef4e642c [ESGB-1204] Implement driver list comparison function SHA-1: ac66483643c63bbad2469e059bae1fafa7f04cbe [ESGB-1428] [BPS] Hii: Add Volatile and Non-Volatile size for Memory Size under Memory page. SHA-1: 59e7766a67f3f0c1e4b50cd9d7b2770044f747ab [ESGB-1010] HiiSetupPkg code cleanup SHA-1: 300177fba2d60b82f414fb6570e58c35dd558f10 [Jit-115726] [Jalpa] x24 NVMe SKU /w PERC - PCIe extender ID is incorrect in iDRAC HW inventory [Jit-127081] 15G:SWPT:Jalpa:PCIE extender gets listed in Jalpa in Hardware inventory which is not supported SHA-1: a76f03f52e00f36b14e49080cfab9299f7ae80c8 [ESGB-1057] - WA for x10 NVMe Alar configuration. Issue occurs when first NVMe device enumerated after unused lanes in P1 Link has assigned function 1. Ticket already submitted to AMD https://ontrack.amd.com/browse/ECET-7786 SHA-1: 24fa36b73ce3eec94cec174ced1599dc6cccdb0a [ESGB-1204] Modify the show log SHA-1: 7ae55457e64b0b866c08cec9c8323895e7a57adb [ESGB-1199] add define for 15G setup SHA-1: e822f511ab6d0ca379b0166864b3dfabad238dc6 JIT-131705 [Alar/Jalpa] Cannot trigger CRC error through AMD RAS tool v1.6.7. Enable Write Data CRC feature on the ROME platforms SHA-1: ac2869e85fe3c0eef085f4a853c9f1844ca02753 [ESGB-674] ACPI. Implement BIOS X2APIC option for Rome. Symptom: X2APIC option disappear after set X2APIC to "Disabled" SHA-1: 35d03ee4d9e926680cfb1263e9a27059704c3d5a [ESGB-1582] Cordoba: Add SlotLength information in the chassis which in not include in Cordoba payloads. SHA-1: d25a9ec627343d33927dfa16c4fab369b4f44534 [ESGB-994] Per PCR LAGUNA-169, SMBUS Access Interface and SPD LOG 1.0 support are required to be disabled temporary to avoid any unexpected issues until SESTO RTS time-frame. SHA-1: 531757de5c442e3390be92b4859b93b8115e946b [JIT-122510] For Cordoba enabled platforms, display the Bay and Slot ID for PCIe SSDs when training errors occur rather than BDF SHA-1: cae911f0b8cbf7517dfd21fb1afe23bf3cc32d31 [JIT-116331] [Alar/Jalpa] Verify Watchdog System Event Log is Fail. Changed the attribute to be FCH watch dog: PcdFchWdtEnable SHA-1: 25483e0b72f411e75af1b5e3f397fd4a156bf902 [ESGB-828] 14G MLK leaky bucket enhancements on AMD Rome. Dynamically adjusted threshold based on DIMM age at time of error SHA-1: 7a9b0e8082c5666f0a8f50ad8b582f5ce67ba186 ESGB-1035 Update batch files and scripts to create an updated localization file in the DellHiiSetupPkg directory. SHA-1: 896014ccaae3da0fdf1aa8a8433aa8ca81bf52db [ESGB-828] 14G MLK leaky bucket enhancements on AMD Rome. Data structure consolidation for DIMM related data SHA-1: 45339a3f9ab66756ee785570bafcb145a894c6fc [JIT-116331] Verify Watchdog System event log is failed. Implemented the function to log SEL and to provide POST message when watchdog timeout happened. SHA-1: b7c8b90a7b56fa12243ad87b2f7eef65d80f0078 [ESGB-1204] 15G setup - make the dynamic system for sub drivers and add the option comparison function with previous build. SHA-1: 5582b91990b71371e1f24ece6e56e11934d5e414 [ESGB-994] Removed timed_PciRead32 and timed_PciWrite32 routines from CPU library that are not applicable to SPD ROME support. SHA-1: 72f3a4502f76c347390b2827a144e7b7e5ac4d99 [ESGB-1499] Added fixed delay time of micro seconds when SMBUS status registers respond time-out. SHA-1: 6cf8f5b659ceac7d322bb380acd233f2fccf1a6c [ESGB-994] Removed all obsoleted CPU functions that are not applicable to ROME platforms. SHA-1: 61b9bf3c8e22f1128ed7d47f7d646d2d0007993d [JIT-122510] Fix issue where PCIe training error location is not getting reported correctly. If the attribute doesn't exist, we need to print the BDF. SHA-1: fd2a35aeffa2699d51c190cee67c9dedef010dd4 [ESGB-994] DIMM SPD logging CPU library - cleanup serial debug statements SHA-1: 9ab38679a0c6ddce1620b14d71752706a0cea440 [ESGB-828] 14G MLK leaky bucket enhancements on AMD Rome Ported from Intel 14G MLK MEM-81 PCR https://jira.gtie.dell.com/browse/MEM-81 per memory team request Remove Warning threshold SEL log to eliminate user notification SHA-1: 9f3f83c7a9074b44e0131976c9c48cc578b348c3 [ESGB-828] 14G MLK leaky bucket enhancements on AMD Rome. Dynamic threshold adjustment to 2X when BIOS discovers a DIMM is 128GB or larger. Cap the dynamic threshold adjustment to 4X when stacking the 3 types of adjustments: temperature, age, capacity Return error status instead if error returned by ElogGetTime SHA-1: 25361aeaf39fa1716a635ae614e577914b639ec0 [ESGB-992] Alar/Jalpa. Update Memory DPI table for ST planar silkscreen. - correct planar revision for PT2, ST1 and ST2 SHA-1: a78daa4aab7b8c2801790931b204c08d04eaf152 [ESGB-1102] AGESA 0090 Integration. Turn on AGESA serial messages. Comment out unneccessary serial messages. **************************************************************************** - Version: 0.3.13 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 5/4/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.9.0 RC3 (NDA) for Family 17h * ABL Firmware Version: RABLSSP00812012 * PSP Firmware Version: 00.0C.00.5B * SMU Firmware Version: 36.67.0 * DXIO Firmware Version : 36.594 * uCode : A0-08300027/B0-0830101A * S150 Firmware Version: 6.0.0-0004 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-132054 System hang at booting windows 2016/2019 OS if BIOS setup x2APIC option was enabled Workaround: Load BIOS default or manually set x2APIC option(in Processor Settings page) to disable after you update BIOS 0.3.13 ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 0.0.9.0 RC3 (NDA). 2. Fix JIT-129844 [JALPA C3] The Data Link Layer Link Active Bit is Never Set When NVMe Drives Are Present and Trained w/ B0 silicon 3. Fix JIT-123441 P4610/P4510/P4800X: On Alar C3, Link Width set to x2 intermittently after continuos link disable/enable 4. Fix JIT-129312 [Alar/Jalpa] Trigger the NBIO error fail. 5. Fix JIT-122377 15G : Sanitise command is not sent for the supported devices. 6. Fix JIT-129830 [JALPA C3] Presence Detect State Bit is Intermittently Remaining Set after NVMe Drive is Removed 7. Fix JIT-129861 [JALPA C3] Incorrect NMI Behavior 8. Update Code Base to version SHA-1: 25361aeaf39fa1716a635ae614e577914b639ec0 ------------------------ SHA-1: 25361aeaf39fa1716a635ae614e577914b639ec0 [ESGB-992] Alar/Jalpa. Update Memory DPI table for ST planar silkscreen - correct planar revision for PT2, ST1 and ST2 SHA-1: a78daa4aab7b8c2801790931b204c08d04eaf152 [ESGB-1102] AGESA 0090 Integration. Turn on AGESA serial messages. Comment out unneccessary serial messages. SHA-1: eaefdc1ac5f67e936e0582ad8b55ed83d0364a7c [ESGB-992] Alar/Jalpa. Change the version number to 91.3.13 SHA-1: 1f94a3c152f3a93ba79fdece29b95387f9c86653 [ESGB-1102] AGESA 0090 Integration. Add missing IOAPIC code SHA-1: b6acf21469d39aa1b78e56d63830845fdd52fe0c [ESGB-854] Security - SEV. Store SEV key in data ROM. 64K region is reserved in data ROM for PSP SEV. SHA-1: 2474e632b3c2c09ad5d151088abb9f22dec65088 [ESGB-1001] ROME SPI Development. - Specify the module type support as DXE_SMM_DRIVER for AmdPspFlashAccLibSmm. - Add support for flash linear address input in AmdPspFlashAccLibSmm library SHA-1: 40cd638289959611136fdf832d7ba8cc728f9fd2 [ESGB-886] Rome RAS: Memory error injection bug fix - Assertion when inject correctable ECC error on DIMM installed at second Processor Device won't be responding while determining if specified DIMM is active due to incorrect initial device number on second Processor for PciRead16() SHA-1: 7e7a5d9ce2ed439cf899ef9b65f6229be4b01ca8 ESGB-886 fix Alar/Jalpha hang issue SHA-1: 695be842b6027649b4627541357d230ef95ca209 [ESGB-994] Added status return for a certain SPD log routines to track NULL pointer errors. SHA-1: 498a67e91dd5d47d353b3ea38888f12009271485 [ESGB-994] Enabled SMM SMBUS read and write operations for SPD logging behaviors during POST. SHA-1: 599eab06ab827fa08fe2430de831ff6972531584 [ESGB-1499] Fixed an issue where SMBUS Write Data Block operation not function properly due to invalid data length. Also, added SMBUS_DEBUG option to disable all the debug messages for this module. SHA-1: ec163524c1780ca69b9bc8e19debb5223cc53aea [ESGB-1102] AGESA 0090 NDA Integration PART 2 - RAS Override Directories SHA-1: 34a5e0ff57d3a3c76b9f4f64963f0e0ea5404816 [ESGB-1010] APB - Issues in setting BIOS Setup attributes from iDRAC interfaces Fix the known issue that iDRAC Web GUI and other management tools (such as RACADM and WSMAN) cannot save BIOS changes after apply the ESGB-1010 SHA-1: 84086da5142edb05c7d16a8ecbab73c13fa3851f [ESGB-674] ACPI. Implement BIOS X2APIC option for Rome 1. Apply X2APIC setting to PcdAmdX2ApicMode 2. If X2APIC set to "Disabled", do not report X2APIC entries in MADT tables SHA-1: 356af0344b35697f8a8f232ad171256132e45fac ESGB-886 support memory test error log SHA-1: 9acd917d33a4d2265e56b1ae20299cb4bab565ca [ESGB-1102] AGESA 0090 NDA Integration PART 1 SHA-1: 30663cf25d097f2d61b9dbf922b06e48fa3b03ea [JIT-122377] Implement NVMe Crypto Erase Sanitize command for the drives that support it SHA-1: 6d9e7793433b1b70d95be9a63cc2edada6a32527 JIT-130711 - 15GSWPT-Roadster : Auto Dedicated option is available in iDRAC setting in F2 which is not supported in roadster. SHA-1: 685f0db32d2ac6a1425a51c7e487a05d7c66dfde [ESGB-1491] Cordoba: Implement root port lane conflict logging SHA-1: b751eed94388b554a2b93e850197fb2fecfc1b9d [ESGB-886] Rome RAS: Dell AMD PPR Support. Disable PPR support SHA-1: 5f750fae944d2fcdc998c12a0f21123eb2fb1769 [ESGB-886] Rome RAS: Dell AMD PPR Support SMM driver to handle hPPR requests for warning&critical threshold/defer/uncorrected error PPR Boot time handler to interrogate PPR output information structure from APOB POST UEFI Message 0279/0278 support to indicate Success/Failure hPPR request Observing Deferred hPPR request failed from DIMM1, checking AMD by (ECET-7990) ADC BIOS RAS - ABL indicates ... SHA-1: 023d0a7d86d73d8e9829653eec7b7c3800831883 [JIT-126769] Comms_QLogic_Suburbia: Manufacturing mode pxe boots through OCP 3.0 port 1 in Roadster Card. 15G BIOS Factory Support Specification has updated for 15G platform configuration, so follow the new spec to update NIC priority in BIOS Mfg mode. New design for BIOS Mfg mode: Port 1: Set Embedded NIC 1 port 1 for PXE device 1. Port 2: Set Integrated NIC 1 port 1 for PXE device 2. SHA-1: 4467f755a9068f530ac886ccb63c862212895f45 [JIT-130305] [Reventon] BIOS Setting will not load default by alt+f. SHA-1: bfd924dbbf097ff760ab8af5a29e26bc90e951cb [ESGB-1491] Cordoba Fix conflicting lane detection bit logic. Fixes false positives in some scenarios SHA-1: bd791ae1783893bba130ed29d0a084bb1370a041 [ESGB-1499] Updated GetSpdLog behaviors and skipped logging SPD from specified DIMM with invalid byte offset or unsupported device. SHA-1: 9e0e4f7d2c7325bd148f767e2332237396a624d5 [ESGB-1491] Cordoba: Add device to motherboard connection map failure logging SHA-1: c2e37614f2fd9d2eb2bdfc2c3ab9cd9efbeb8df1 [JIT-130166] [Roadster PT] IOMMU Support is not changed after pressing Default button in System BIOS Processor Settings page. - Root cause is default value should get from DEFAULT_VARSTORE not CURRENT_VARSTORE. SHA-1: 4b867ce628faed252772c57ef41cb8d0dc16a76d [JIT-130599] [Alar/Jalpa]Passwords are reset after flashing BIOS with AMD B0 CPU SHA-1: c5b93f2144fb195e4ffb1c16e2a1fbb1099b86d5 [ESGB-886] Rome RAS: Memory error injection bug fix SHA-1: dc0d84456c2d2d47d29b551b90ab102efd494513 JIT-129312 [Alar/Jalpa] Trigger the NBIO error fail. Adjust ParityCorrThreshold from 1 to 0 to have SMI signal on every Parity ECC Correctable Under investigating for NBIO Global Status or RAS_GLOBAL_STATUS don't get return when inject error on Nbio1-3 SHA-1: acd4ae59d68a6fa011947fe9fdf2bf65b4253ee6 [ESGB-828] Rome RAS unit testing > Additional serial debug output for error cases in ElogGetTime procedure SHA-1: 70747d4417dccd4d65a8ee55daf716ada94a5a15 [ESGB-994] Updated EnterSPD and ExitSPD behaviors to exclude SPD logging during OS Run-time via IDRAC IPMI interface for ROME platforms only. Fixed the debug messages with missing debug variables for SMBUS access interface. SHA-1: 1c905129b256497b1a5f916884228faf19d7b1ff JIT-119161 - [3.30.30.30]14G RTS+ : iDRAC-HII - SEL in the setup menu and LC log in the iDRAC GUI do not match. SHA-1: 29a90aa8f511f86e5e36634e1227cf21a89eae2d [JIT-126376] Update GPIO maps for Alar and Sesto to config I2C SDA/SCL to function 0. This is needed to match AMD's specs for NVMe hotplug. SHA-1: 7d7083aabcaffa93fd803cdb2950a0cde02998fb [ESGB-1102] AGESA 0090 RC2 Integration PART 2 - RAS Override Directories SHA-1: f22974cf24d0290edb73f566560ca061dab317b7 [ESGB-1001] [AMD] SPI development and enhancement. Debug message to output address and length when invalid SPI access. SHA-1: 51a668c7566d3dfb7d555003d5aaeea4f40a6070 [ESGB-1102] AGESA 0090 RC2 Integration PART 2 -Build fix adding missing file AMD/Rome/AmdCpmPkg/Include/Register/AmdSlinkPcieReg.h SHA-1: 8a91d6f333b78955222fffd2add26d0bdaa9be87 [JIT-130573] COMMs_Broadcom_Sophie - Server is not booting to Virtual CD to install OS. SHA-1: 9fcd7f3830eaf2d6cb7b1cebc24b2ee08f7e6e87 [ESGB-1102] AGESA 0090 RC2 Integration PART 1 SHA-1: 9904e0db90ecb2cbd7a22820911fa10f1ae398fa [ESGB-1499] Need to get STALL time from MetronomeArch protocol to monitor SMBUS status register. SHA-1: b4b794821ec323e8f0d5287cc0be914f58be8ab4 [JIT-125538] [Jalpa] BIOS getting hang on "Initializing firmware interfaces" when Boradcom LPE35002(PD89Y) in slot 2. SHA-1: fbf469c022b198eefec094ce3d416bc8973a6aae [ESGB-1139] Cordoba: Implement root port lane tracker in core stitcher SHA-1: 7b0abd8017a85f8eafc67851f3d2319210727407 [ESGB-828] Rome RAS unit testing - Standardize serial output in DellElogIpmiLibSmm SHA-1: b3d70b99f0bd3e1b5a17f343c01051d53b67451a [ESGB-828] Rome RAS unit testing bug fixes > Modify code so that we don't clear PCIe DevCtrl uncorrected error status bits in event of corrected error SHA-1: bcdff10cb4da06c3061f2c513dc651d8f34ff4c0 ESGB-886 support MCTP SHA-1: d00299f43b52465b9d7a813103a0609eb9c262ef [ESGB-1511] Remove OEM ID requirement for the Reset option of Boot Sequence Retry - Removed references to OEM ID "BootSeqRetryResetOption" so "Reset" option is always present for the Boot Sequence Retry attribute. - Updated Boot Sequence Retry help text to include Reset option. SHA-1: 65b08b94b35370f325a47f862e54df56b2c9cc38 [ESGB-992] Alar/Jalpa. Hide PPIN setup item. SHA-1: e51d82e3c596454e7799af4c9b6f76428218dda5 [JIT-129888] SWRAID6.0: NVMe HHHL card not shown correct FF details in ePSA. **************************************************************************** - Version: 0.3.12 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 5/3/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.1 RC4 for Family 17h * ABL Firmware Version: RABLSSP00812012 * PSP Firmware Version: 00.0C.00.58 * SMU Firmware Version: 36.61.0 * DXIO Firmware Version : 36.580 * uCode : A0-08300023/B0-08301005 * S150 Firmware Version: 6.0.0-0004 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-130599 [Alar/Jalpa]Passwords are reset after flashing BIOS with AMD B0 CPU 2. Fix JIT-129722 [Alar/Jalpa]Cannot write over AssetTag value through efi shell 3. Fix JIT-128861 15G:Swpt:Rome:Jalpa:Unable to set the AC Recovery to new value 'On' 4. Fix JIT-130677 15G: SWPT: Jalpa: Getting "Unable to apply the boot mode settings for BIOS" when installing OS from LC 5. Update iDRAC_HII.efi to X01 ------------------------ SHA-1: 4b867ce628faed252772c57ef41cb8d0dc16a76d [JIT-130599] [Alar/Jalpa]Passwords are reset after flashing BIOS with AMD B0 CPU Current 32MB BIOS is made by copying upper 16MB to lower 16MB so those blocks in lower 16MB should have the same block attribute as those ones in upper 16MB. SHA-1: c2e37614f2fd9d2eb2bdfc2c3ab9cd9efbeb8df1 [JIT-130166] [Roadster PT] IOMMU Support is not changed after pressing Default button in System BIOS Processor Settings page. - Root cause is default value should get from DEFAULT_VARSTORE not CURRENT_VARSTORE. SHA-1: 6d9e7793433b1b70d95be9a63cc2edada6a32527 Update iDRAC_HII.efi to X01 JIT-130711 - 15GSWPT-Roadster : Auto Dedicated option is available in iDRAC setting in F2 which is not supported in roadster. SHA-1: 34a5e0ff57d3a3c76b9f4f64963f0e0ea5404816 [ESGB-1010] APB - Issues in setting BIOS Setup attributes from iDRAC interfaces Fix the known issue that iDRAC Web GUI and other management tools (such as RACADM and WSMAN) cannot save BIOS changes after apply the ESGB-1010 **************************************************************************** - Version: 0.3.11 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 4/29/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.1 RC4 for Family 17h * ABL Firmware Version: RABLSSP00812012 * PSP Firmware Version: 00.0C.00.58 * SMU Firmware Version: 36.61.0 * DXIO Firmware Version : 36.580 * uCode : A0-08300023/B0-08301005 * S150 Firmware Version: 6.0.0-0004 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. iDRAC Web GUI and other management tools (such as RACADM and WSMAN) cannot save BIOS changes after apply the ESGB-1010 [15G] HII Setup Modularity (APB: 15G ROME - Issues in setting BIOS Setup attributes from iDRAC interfaces) ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-127098 OM931:OMSS:Jalpa:Win2k19/Win2k16/ESXI 6.7 U2:NVMe Drives are not getting detected in OMSS storage tree 2. Fix JIT-128267 15G:SWPT:Jalpa:Unable to install Windows 2016 OS in Jalpa-C4 Config 3. Fix JIT-124699 [Jalpa C4] System hang with NVMe devices(DRC9H/FWYRY/3DM57) via SKU of 24 NVMe x 2.5" during OS installation of SLES 15 SP1 Beta4. 4. Fix JIT-130225 COMMs_Broadcom_Sophie - Server not booting to PXE in BIOS Manufacturing mode 5. Fix JIT-125538 [Jalpa] BIOS getting hang on "Initializing firmware interfaces" when Boradcom LPE35002(PD89Y) in slot 2. 6. Fix JIT-120399 [Alar/Jalpa]PCIe physical slot configuration detail under ePSA is incorrect. 7. Fix JIT-126855 15G-JALPA_Storage-PT : Incorrect slot number is seen for external controller under HII 8. Fix JIT-130457 PERC 10.4: Reventon Storage PT: Wrong Slot Number is showing for Dell 12G SAS HBA adapter in HII 9. Fix JIT-123695 15G-ALAR_Storage-PT : PCI Slot is seen as 0x0 for 12Gbps HBA controller under HII 10. Fix JIT-130573 COMMs_Broadcom_Sophie - Server is not booting to Virtual CD to install OS. 11. Fix JIT-130785 15G:SWPT:Jalpa:Processor Settings in BIOS configuration page lists Protected Processor inventory Number 12. Update Memory DPI table for ST planar silkscreen 13. Update Code Base to version SHA-1: SHA-1: 1dd14aea5321eeb70305e08f8f6aacf76b9e285e ------------------------ SHA-1: fa880e9f1ffd0d444b969e7b37eeb4b8bbe048cf [JIT-120399] [Alar/Jalpa]PCIe physical slot configuration detail under ePSA is incorrect [JIT-126855] 15G-JALPA_Storage-PT : Incorrect slot number is seen for external controller under HII [JIT-130457] PERC 10.4: Reventon Storage PT: Wrong Slot Number is showing for Dell 12G SAS HBA adapter in HII [JIT-123695] 15G-ALAR_Storage-PT : PCI Slot is seen as 0x0 for 12Gbps HBA controller under HII Implement Physical Slot Number by RomePI new interface. SHA-1: 8a91d6f333b78955222fffd2add26d0bdaa9be87 [JIT-130573] COMMs_Broadcom_Sophie - Server is not booting to Virtual CD to install OS. Initialize USB CDROM (including virtual CD) will take long time for its readiness. So BIOS have to detect the media presence couple times to know if the media is present or not. SHA-1: b4b794821ec323e8f0d5287cc0be914f58be8ab4 [JIT-125538] [Jalpa] BIOS getting hang on "Initializing firmware interfaces" when Boradcom LPE35002(PD89Y) in slot 2. SHA-1: b3d70b99f0bd3e1b5a17f343c01051d53b67451a [ESGB-828] Rome RAS unit testing bug fixes > Modify code so that we don't clear PCIe DevCtrl uncorrected error status bits in event of corrected error SHA-1: e51d82e3c596454e7799af4c9b6f76428218dda5 [JIT-129888] SWRAID6.0: NVMe HHHL card not shown correct FF details in ePSA. SSD form factor has to be aligned with SMBIOS Type 9 SSD form factor where we used same logic to determine. SHA-1: 65b08b94b35370f325a47f862e54df56b2c9cc38 [ESGB-992] Alar/Jalpa. Hide PPIN setup item. (JIT-130785) SHA-1: b413efd51e38471cbb8e60d8133b17d4563ffdca * Revert "[ESGB-1102] AGESA 0090 RC1 Integration PART 1". This reverts commit 0355b14c7db81a7d9cb3eac4157720f91b07eb43. SHA-1: 6848b658eb541d6a44d7d0af3b9442c39cd119ff * Revert "[ESGB-1102] AGESA 0090 RC1 Integration PART 2". This reverts commit e41bccc98ff8e5e00545a5987632b5724aaf2290. SHA-1: 992bf462e01379f92d0ff3ce0ea08c8f0632ab35 * Revert "[ESGB-1090] modify xGMI default value to align to APCB default updated with AGESA 090 RC1." This reverts commit 4f9732be852f3aad5689b218bafe280f16087a2f. SHA-1: ee5857ae5464b7b71eead42715405651a71cc281 * Revert "[ESGB-1090] SESTO/REVENTON - mod xGMI link default from "AUTO" to "3 links"" This reverts commit 118dfa7db546324a07753f1bd5918d585c1e1014. SHA-1: 1dd14aea5321eeb70305e08f8f6aacf76b9e285e [ESGB-992] Alar/Jalpa. Change the version number to 91.3.11 SHA-1: b5f0a2db6145d0098c14397f924016b2cf0cfa3f [JIT-130309] Description of Help message are incorrect on BIOS 0.3.1. SHA-1: 20535e3365362ed6515a33bf349d01ec9b889cb0 [ESGB-1010] HiiSetupPkg: Code cleanup - Remove HiiHandle parameter from DELL_HII_ATTRIBUTE_MAPPING_PROTOCOL.GetNvramConfigData() interface SHA-1: c7058d097d7b3b6e7563bc5af3c968308b75f297 [ESGB-1478] TPM Support. Correct TPM 1.2 manufacture string. " CTN" => "NTC " SHA-1: 5af1ef83cc7f52919624e333bd6f2640cf0a4142 [ESGB-992] Alar/Jalpa. Update Memory DPI table for ST planar silkscreen SHA-1: 71c2c52e115cd7e269460d9ddda1f1e135bc0eef [JIT-128267] Fix unable to install Windows 2016 OS in Jalpa-C4 Config. - It's a w/a for ROME A0 CPU. When NVME disks attached behind a PLX birdge, PRESENCE_DETECT_STATE_PRIVATE cannot be detected correctly(empty slot). It will cause the PLX birdge and NVME disks are disabled by Bridge_Dis. SHA-1: 721e0bd657349f6ffc14626b74e7216681275edf [ESGB-1010] HiiSetupPkg: - Fixed that ApplyDellOverlay() is not called after system BIOS settings are changed - Fixed that COLD_RESET_NEEDED attribute is not set after system BIOS settings are changed SHA-1: dbdaf68022e24db9e1ee10377e317b4a24bff221 [ESGB-1010] HiiSetupPkg: Code cleanup - Add debug messages - Update comments SHA-1: fb541e36403895e49362c9a57d72ce6503e89e45 [ESGB-886] Rome RAS: Memory error injection bug fix. Fix correctable memory error don't get cloaked. Fix correctable memory error can only inject successfully first time, threshold count don't restore to 0xFFE on following injections SHA-1: 4385bcfbd2ccd26ac1c419593dc63f83d5605915 [ESGB-1491] Cordoba: Add misc interface mismatch function to Device Config Error Log null library SHA-1: e8b4907bdaab150da92093a6eb3b0d751ed13a1d [ESGB-1491] Cordoba: Clean up interface mismatch miscellaneous data generation. Error Log library now has a function that will generate the miscellaneous data. SHA-1: 3c933e2be0989d27e85246a26c54e4407390bb75 [ESGB-1493] Cordoba: Assign private key value to member of Device Config Error Log PPI. Fixes issue where API calls failed because the private key within the PPI object passed in failed the private key check SHA-1: 3ee283f75aab22627c634cd231065ae019482f67 [ESGB-1493] Cordoba: Disable DCEL DXE driver assert if hob is not found SHA-1: df0ee6eb508e8d439082fe54ad79282a07e0b22d [ESGB-828] 14G MLK leaky bucket enhancements on AMD Rome. Get system time once to prevent multi-access on every single installed DIMMs. Correctable Memory Threshold default value for AMD should be 3 SHA-1: 7c74e4b4b33936ac11cdf4c6ad16bc63e9da787d [ESGB-1499] Added Write operations for SMM SMBUS Access interface. SHA-1: d3f9ccf53cc576ff0e0fe9a2ca53c7f6a510a90e [ESGB-1499] Need to add SmbusSelect during page address switching of SmbusDevice and also make a common function definition for both DXE and SMM SMBUS access interface. SHA-1: ab3cb9e9e97878c468f529664e8dd8151de6ec00 [ESGB-1351] EDK2 sync. Fix Xhci dead loop issue, REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1505 SHA-1: ccef3010692eb44b7f10c052d030e8adb050531d [JIT-129458] Hadware Label is shown as N/A in Network Management Page of ESXi 6.7U2. Description: 1. Update OCP DMS table. 2. Update NVMe DSM table. SHA-1: 565bcc1d0158030d8b773f315fbceb6c3e78efb4 [ESGB-1492, ESGB-1493] Cordoba: Implement Device Config Error Log framework. Log entries accumulate in PEI and are then transferred to DXE through a HOB. Dxe driver then transfers a limited-number of error entries to iDRAC via an IPMI command. SHA-1: 66ddb7adda8cc557f7e2a5aba158dc4666aab94b ESGB-1321: SST-CP does not need to be greyed out SHA-1: e5411f0715629a0325345b99b164cafc414b5d52 [ESGB-1499] Initialized SMM SMBUS IO base address from HW and added EfiSmbusReceiveByte to SMBUS process operation. SHA-1: 4ed89f8e389616a0f00d5cb6734b9a4c0e9ba6e1 [ESGB-994] Updated IDRAC SPD proxy use DataLength instead of DataOffsetEnd during read and write data block operation. SHA-1: 129aa4a451b1ea9971e995d9cc9d06f7d3dfc7cf [ESGB-994] Updated IPMI DIMM Access command definitions to workaround build issue where Whitley CpRcPkg code has duplicated definitions in SsaMemoryConfig.h. SHA-1: 4adbbfa7fc5cf3c45ede451e9cc732b271c888f8 [ESGB-1010] Fixed that Hii Config protocol cannot set/get attribute The issue is caused by forms processor doesn't report sub drivers forms data when get/set value from HII Config protocol. SHA-1: 680fe26eb1234341ea31b98cb9a7eff4ec9a9855 [ESGB-828] DIMM SPD logging > DEBUG statement clean-up, printf format string standardization SHA-1: e25955ebf05581d67bad0378c2a48936cfe4ad17 [ESGB-992] Alar/Jalpa. Disable EDK2 image protection temporarily. SHA-1: 6d7541348c5903b9b1ac69bbfa0c003e5d9b0de2 [JIT-126917] [Alar/Jalpa] SMBIOS Type 9 - Slot length information is incorrect. -Fix slot length by planar. SHA-1: 77696cca243eb63ac3d899700d0e89a0439a3dc0 ESGB-1321: needs to be greyed out when CPU Power Management is not OS DPBM. When greyed out SST-BF is still set to enabled. It needs to be set to disabled when greyed out. SHA-1: cd09384698f7e758de503f40a5d42643072295e1 [ESGB-1499] Updated WriteSpdBlock operation to use data length instead of data offset value to fix an issue where the data was written in wrong location. SHA-1: a5f4d353a254cf44ed2ce568e4bc7429ee0b5a1b [ESGB-1499] Added WriteSPDBlock SMBUS function for SPD logging. SHA-1: 1c1b03d0c2c3b800c0fb08f1d5379ba93dc6c9d9 [JIT-126539] Comms_QLogic_Suburbia: VM failed to power on with SRIOV VF's attached to ESX6.7 OS with Roadster PT server [JIT-126199] Comms_QLogic_Suburbia: SR-IOV is not working for Phoenix-BT in WS2019 OS in Roadster Enable ARI to support SRIOV function. SHA-1: edb5686452a2d19840732f6d04c4dec0c4d6e88f [ESGB-828] Rome RAS DIMM SPD Porting > Remove residual, older SPD logging callouts (clean-up) **************************************************************************** - Version: 0.3.10 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 4/19/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.1 RC4 for Family 17h * ABL Firmware Version: RABLSSP00812012 * PSP Firmware Version: 00.0C.00.58 * SMU Firmware Version: 36.61.0 * DXIO Firmware Version : 36.580 * uCode : A0-08300023/B0-08301005 * S150 Firmware Version: 6.0.0-0004 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. iDRAC Web GUI and other management tools (such as RACADM and WSMAN) cannot save BIOS changes after apply the ESGB-1010 [15G] HII Setup Modularity (APB: 15G ROME - Issues in setting BIOS Setup attributes from iDRAC interfaces) ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-122313 [Alar/Jalpa] SUT stuck at POST after set Embedded NIC1 and NIC2 to "Disabled(OS)" 2. Fix JIT-129392 Alar/Jalpa system can on-line flash BIOS 0.3.9 successfully, but system can't boot up after system reboot 3. Fix JIT-129194 COMMs_Intel_Ramona - LOMs port info on top of Win16 listing as PCIe Slot 1 and PCIe Slot 2 4. Fix JIT-127977 COMMs_Intel_Ramona - System is getting Stuck at POST while applying OEM pm file waited for around 1hour 5. Fix JIT-129775 15G:SWPT:Alar: server is hanging in booting while re-branding the system 6. Fix JIT-127021 15G:SWPT:Jalpa:"Unable to verify the chassis type via iDRAC and BC" message after updating BIOS to 0.3.5 7. Fix JIT-127047 15G:SWPT:Alar-Lclogs showing Unable to verify the chassis type via iDRAC and BC.After updating Bios 0.3.5 8. Fix JIT-127290 15G: SWPT: Alar: LC Log reporting Unable to verify the chassis type in iDRAC and BC 9. Fix JIT-127568 COMMs_Intel_Ramona - Observing "Unable to verify the chassis type via iDRAC and BC" LC Log after flashing BIOS 0.3.5 10. Fix JIT-127472 COMMs_Broadcom_Sophie - Mezzanine Card installed in SLOT 1 kept functioning evenafter Disabling the Slot 1 in F2 11. Fix JIT-128783 15G ALAR : Storage PT - Server hangs after Slot disablement. 12. Fix JIT-129422 15G:SWPT:ROME JALPA PT:Receving RSOD screen 13. Update Code Base to version SHA-1: d1c3ef237b905c535cc02bda9abeab9851df20dd ------------------------ SHA-1: e25955ebf05581d67bad0378c2a48936cfe4ad17 [ESGB-992] Alar/Jalpa. Disable EDK2 image protection temporarily. SHA-1: 1c1b03d0c2c3b800c0fb08f1d5379ba93dc6c9d9 [JIT-126539] Comms_QLogic_Suburbia: VM failed to power on with SRIOV VF's attached to ESX6.7 OS with Roadster PT server [JIT-126199] Comms_QLogic_Suburbia: SR-IOV is not working for Phoenix-BT in WS2019 OS in Roadster Enable ARI to support SRIOV function. SHA-1: d1c3ef237b905c535cc02bda9abeab9851df20dd [ESGB-992] Alar/Jalpa. Change the version number to 91.3.10 SHA-1: a55cd834183cc3cd827f6641fdd83a4ff83c86cb [JIT-117771] [R&S] BIOS option "Integrated RAID Controller" no function SHA-1: 7c995cffd462dda650c8624c21bfb62b72dc341a * ESGB-554 [WSMT Changes for 15G] -Unregister EndOfDxe notification in library deconstructor. SHA-1: 79bf3fa891404ec3441f238657bd082caa1528c8 [ESGB-1499] Added DXE SMBUS Access and SPD write operations. SHA-1: 88578a0fbe458191f8e6fbc7ae17c9dededa3e6a [ESGB-828] 14G MLK leaky bucket enhancements on AMD Rome. CperGetTime procedure is not specific to DellCperSupportLib, re-name to ElogGetTime and move to DellElogBaseLib SHA-1: 529fae85674ae9f734778e9fc598ff77579bc07e [ESGB-828] Rome RAS DIMM SPD logging > Plumb SPD logging callouts into DellElogPolicyLibSmm SHA-1: f5d45c13479e955d786f178a2a699f77b64900c1 [ESGB-828] Rome RAS DIMM SPD Porting > Plumbing for Cumulative UE/CE ECC error counts > Plumbing for Cumulative PPR counts SHA-1: ce08d84fbb05cf5fbdb0e16dc3b4c89b97663cb0 [JIT-129346] "Embedded NIC1 and NIC2" option will disappear in Integrated Devices with OCP". - Fix the issue "cannot show both OCP and LOM at the same time in Integrated Devices in BIOS setup".this also fix the issue SHA-1: 9a237e779118c6dee9572ac8a4cba3bed44b4389 [JIT-129392] Alar/Jalpa system can on-line flash BIOS 0.3.9 successfully, but system can't boot up after system reboot. Add 4 byte address detection for second source flash part MX25L25673GM. SHA-1: 647e73ac44087109add15034d95243bd9879574e [JIT-129194] COMMs_Intel_Ramona - LOMs port info on top of Win16 listing as PCIe Slot 1 and PCIe Slot 2 SHA-1: e9b82fffccc8144c741add66d2e01b4986b87b76 [JIT-127977]COMMs_Intel_Ramona - System is getting Stuck at POST while applying OEM pm file waited for around 1hour. *Root Cause* SMM communication buffer contains nested pointers which points to an invalid buffer. *Fix* Using a valid continuous communication buffer to replace nested pointer. SHA-1: bee2272dd925698f90f8d1a2611fa35c12c64980 [ESGB-1010] HiiSetupPkg: Sort formset data with HII_SETUP_COMPONENT_DATA.Index - So the generated formset data can have a fixed order SHA-1: 1f59fa0624f89513e353e1f463d241723c0bc643 [ESGB-1499] Added additional DXE SmbusRead behaviors to read byte, word and entire SPD log. Also, added DeviceType and SmbusSelect parameters for future SMBUS device expansion. SHA-1: e9ba392dd31c3e9b2546e569997ebf74a2c4a6e5 [JIT-127472] COMMs_Broadcom_Sophie - Mezzanine Card installed in SLOT 1 kept functioning evenafter Disabling the Slot 1 in F2 Added code to prevent Slot1 to disappear from setup menu when disabled. SHA-1: 308604b5fc557bfea038b1f0d860b59a53cf8cd0 Modified CheckImageInformationBlock.cpp so that the utility returns an error code if any of the Immutable regions fail the Hash check. Added message regarding the IIB signature. This utility cannot tell if the signature is valid but it can tell if the IIB is signed or not. Changed CreateImageInfoBlock.bat so that it calls CheckImageInformationBlock.exe. SHA-1: 3b33ae5df15d6876efa20845e69fbd9f42c148f1 Completed CheckImageInformationBlock tool. Need to add invoking the tool during the BIOS build; most likely from CreateImageInfoBlock.bat on the projects that support the Image Information Block. SHA-1: 5c9a4d0207c61db286b6a60447c815eb002bb9c2 [JIT-124120] SWRAID 6.0 : BCADM - AIC Form factor is showing as a Unknown - Added Temporary WorkAround for SlotLegth value. Ticket will be keep open for a final fix SHA-1: 18166c1f04147680e5f2f52f2e13df4eeeeb9b4c [ESGB-1010] HiiSetupPkg: Add HII_SETUP_COMPONENT_DATA.Index for sub drivers (cont.) - Add missing changes SHA-1: 2aa43370cb0bb8138de4cb2e8599e87f6d1341c1 [ESGB-1010] HiiSetupPkg: Add HII_SETUP_COMPONENT_DATA.Index for sub drivers - This is a sequence number to indicate the order of sub drivers been parsed in the pre-build script SHA-1: 8328892458b293f9a8564fa4aeea783b81e13a5b [ESGB-721] KCS Interface (IPMI). Prevent SMM code from using boot service. (#PF) Replace gBS->Stall by MicroSecondDelay provided by TimerLib. SHA-1: d497e2abf457326cd144bbd90936d66d7345dc23 [ESGB-886] Rome RAS: 14G MLK leaky bucket enhancements ported on AMD Rome Fix SHA-1: f1af41d3f700b44743678ecd3c0be163931248a2 build fail SHA-1: f1af41d3f700b44743678ecd3c0be163931248a2 [ESGB-886] Rome RAS: 14G MLK leaky bucket enhancements ported on AMD Rome SHA-1: 69b512f7c7a96942d46fd61dab21725e26d176e0 [ESGB-1351] EDK2 sync. Add SHA384 and SHA512 HASH instances. SHA-1: ae0b00d2c556e0769c0bc453ea62aad7b0edb5f9 [ESGB-832] Virtualization - decouple PcdCfgACSEnable and SR-IOV setup option. SHA-1: b6ceff388e76ac5d644c8fc758fb2a9ed6752d66 [ESGB-1499] Updated Agesa code to add EfiSmbusReceiveByte operation command to SMBUS SuccessfulCompletion behaviors and resolved invalid buffer and data issue returned SmbusExecute read operation. Added cod build option to SMBUS access interface for debugging purposes. SHA-1: e4920751100f5d433dd4479100ce300eee2f6568 [JIT-122313] [Alar/Jalpa] SUT stuck at POST after set Embedded NIC1 and NIC2 to "Disabled(OS)" - When disabling Embedded NIC the video stops working after PCI enumeration. This is caused by an Override on Dev/Fun of the WAFL associated to the NIC, it is changed to 0:0. Code is intended to prevent this override since this cause Device Paths being corrupted for Embedded Video by function FixupDev... -Later need to verify if FixupDevicePaths() is really needed. SHA-1: ab1f1e1f791ca82fd02fd6030d26cd86a1ce6986 [ESGB-1139] Cordoba: Implement cable swizzle detection SHA-1: bfae89f781befdd78193c33aef484e20ff07c5f6 [ESGB-1499] Corrected SMBUS execute operation (WriteByte vs ReceiveByte Receive when switching the page and accessing smbus. SHA-1: fcb563b04fe23ca0d853d67faf5ec991c08a7123 [ESGB-994] Do not monitor and track ResponseTransaction ID during the WriteSPD operation via IPMI Asynchronous transaction and temporary not to return error status for wrong value of ResponseTransactionID. SHA-1: 1bf148bcc31b804575475a425f5254825193e46d [ESGB-1499] Allowed all SMBUS access functions to track the status and added additional SmbusExecute operation during SmbusI2CMux switching operation. SHA-1: b055f5fc1d6dbcd25aa7d15c720a05358cfe3e9b [JIT-127021] 15G:SWPT:Jalpa:"Unable to verify the chassis type via iDRAC and BC" message after updating BIOS to 0.3.5 Set a condition check for this message because currently only ESI Ghost planar needs to report the POST message. SHA-1: 527203acc69369f55f40371cc2905511a26b0056 Revert "[JIT-127472] Alar/Jalpa. Mezzanine Card installed in SLOT 1 kept functioning evenafter Disabling the Slot 1 in F2" This reverts commit 8fab50c0d7e56b63f0f0a4af7306eb255c20d1de. SHA-1: daee544dfa838918f2c201c0e744a03beb627e7d [JIT-127967] System will halt at Initializing PCIe,USB and Video when install FPGA card (DPN:K13JK)".Remove off the ASSERT code for the condition of the PCIe device w/o AER in pcie cfg space. SHA-1: 8f1e62509c199e3312767be1bcf36e1c26049f2a [ESGB-1499] Added Dell SMBUS DXE Interface for ROME platforms. SHA-1: 327b7279db78ef1d18a448f35c5b587ed2b066ed [JIT-126991] Adding back IOMMU Setup option since it was not ported to new modular HII Also, enabling SRIOV by default again, seems this was disabled by accident **************************************************************************** - Version: 0.3.9 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 4/12/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.1 RC4 for Family 17h * ABL Firmware Version: RABLSSP00812012 * PSP Firmware Version: 00.0C.00.58 * SMU Firmware Version: 36.61.0 * DXIO Firmware Version : 36.580 * uCode : A0-08300023/B0-08301005 * S150 Firmware Version: 6.0.0-0004 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. iDRAC Web GUI and other management tools (such as RACADM and WSMAN) cannot save BIOS changes after apply the ESGB-1010 [15G] HII Setup Modularity (APB: 15G ROME - Issues in setting BIOS Setup attributes from iDRAC interfaces) 2. JIT-129392 Alar/Jalpa BIOS 0.3.9 Linux DUP can update successfully, but system can't boot up after system reboot. Workaround: Please use Windows DUP or EFI update instead. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. SWRAID S150 UEFI Firmware v6.0.0.0004 integration 2. Fix JIT-127001 15G:SWPT:Jalpa: Redfish: SMBIOS TYPE 42 data not getting populated on AMD platform 3. Fix JIT-123356 15G: SWPT: Alar: Rsod (Winload_Prod.efi) seen on Win 2016 load on 15G 1S platform 4. Fix JIT-126427 [Alar][REL-PT]System hangs on RSOD at initializing Firmware interfaces. (Issue found in L02 PCBA) 5. Fix JIT-122719 [Esxi-67U2-R6515] Observing PSOD screen after multiple reboots on server. 6. Fix JIT-124550 System always hang on PSOD during ESXi6.5u3(TGC8J) installation with bios default setting. 7. Fix JIT-124876 COMMs_Emulex_Kestrel - Getting PSOD while installing ESX67U2 on Alar Platform in UEFI mode 8. Fix JIT-126521 Received a PSOD on R6515 when installing ESX 6.7u2 without Marvell Adapters installed 9. Fix JIT-127920 R6515 PSOD when installing ESXi 6.7u2 x13 10. Fix JIT-125853 ESXi 6.7U2 installation PSOD with error "Could not start pcpu" 11. Fix JIT-128012 15G : SWPT: Alar: Observing PSOD screen when installing ESX 6.5 U3 12. Fix JIT-125536 [OM9.3.1] ESXi6.7U2: Observing a PSOD during OS installation of ESXi6.7 U2 X12 OS build#12582069 on 15G AMD servers 13. Fix JIT-125527 [Jalpa]System hang in Windows loading logo when execute system reboot cycle stress. 14. Fix JIT-125733 BIOS 0.3.3 can't install OS due to the NVMe can't be found during OS installation 15. Fix JIT-126151 CPU1 Machine check error noticed on Jalpa PT Config.4 NVME systems 16. Fix JIT-126365 COMMs_Intel_Ramona - Sometimes "Server is getting hung at booting from Virtual CD or at Loading Files or ending with IO Errors" during OS load 17. Fix JIT-128263 15G:Swpt:Rome:Alar:AcPwrRcvry User Defined Delay not setting values 18. Fix JIT-122101 Alar C3/Jalpa C3 Presence detect bit not correctly set in some nvme configurations 19. Fix JIT-126427 [Alar][REL-PT]System hangs on RSOD at initializing Firmware interfaces. (Issue found in L02 PCBA) 20. Fix JIT-126991 15G-Jalpa_Storage-PT : Observing RSOD during every reboot since BIOS firmware updated to 0.3.5 21. Fix JIT-122275 OM9.3.1 :OMSS (UT Defect) : (ALAR) Hot Plug of NVME drive is not getting updated in the OMSA GUI. 22. Fix JIT-129069 COMMs_Intel_Ramona - Unable load/install Win16 as it is getting stuck at Windows Image on Alar in BIOS Mode 23. Fix JIT-128877 15G:SWPT:ROME JALPA PT:Receving RSOD screen 24. Update Code Base to version SHA-1: 301028e0bc670b5844dbeda308fab243b3ab958c ------------------------ SHA-1: 5176083c36fe29ff4aacf2367c9eb623fdc13ede Revert "[JIT-127472] Alar/Jalpa. Mezzanine Card installed in SLOT 1 kept functioning evenafter Disabling the Slot 1 in F2" This reverts commit 8fab50c0d7e56b63f0f0a4af7306eb255c20d1de. SHA-1: e9b5a290a1a0c29e47a2857be98ec84fb0a61af7 [JIT-126991] Adding back IOMMU Setup option since it was not ported to new modular HII. Also, enabling SRIOV by default again, seems this was disabled by accident. SHA-1: 19bbcf18ca4d932d690f41d69ab2e09b16f85a35 [JIT-129196] [Sesto] There is no RAID Mode option in Embedded SATA with BIOS v0.3.0. SHA-1: 301028e0bc670b5844dbeda308fab243b3ab958c [ESGB-992] Alar/Jalpa. Change the version number to 91.3.9 SHA-1: d9053b857e842913c9ed393253de4e7891028b8c [JIT-122313] [Alar/Jalpa] SUT stuck at POST after set Embedded NIC1 and NIC2 to "Disabled(OS)" SHA-1: 0ecf7c9351d21b1bbb85ca75abca6bc05dd95528 [ESGB-1010] HiiSetupPkg: Add Size field for HII_SETUP_VARSTORE data structure SHA-1: f6ea3d51b6c4d1d6da5351f494778c3e6c40f0ae, c71dccdabd98e93dc9e2a68e3bc10a6f0dd5d27b ESGB-1313: update for sync with LC define SHA-1: 2ffe6f5d375ea81d83b21ddcc204f56896769203 [ESGB-817] Redundant OS Control. Update "Redundant OS" SATA Port Disablement function by Rome silicon design. SHA-1: 40550bca4707f88123d2a45c154cadb824c8bcad [ESGB-1224] Fix "the slot number will be incorrect for some slots on riser 1B/2B/3B/4B" SHA-1: b8d3b0a3d4d159281f5d25073de21a98c0dbe08c [ESGB-1499] Added a mechanism to read data, page and mux switching via SMBUS access. SHA-1: 20efbf24dfb3fcc6c980e2a406be009c17e54f23 [ESGB-828] Rome RAS unit testing. > Improvements to DellSmmElogClearPcieDeviceStatus SHA-1: d5855d773a1d7f20b60e354719be9e492097fcce [JIT-123356] 15G: SWPT: Alar: Rsod (Winload_Prod.efi) seen on Win 2016 load on 15G 1S platform [JIT-126427] [Alar][REL-PT]System hangs on RSOD at initializing Firmware interfaces. (Issue found in L02 PCBA) SHA-1: 2065376b6b549a6e69b0693c83c67e5133ac94ed [ESGB-792] DRAM size cannot shows properly in iDrac GUI memory detail information Change the type of DRAM size from NonVolatileSize to VolatileSize SHA-1: f25256318d54e12c103f70de6266ba7ba895cc28 [JIT-127070] 15G-Alar-SWPT : Server bootup is getting stuck at "Entering Lifecycle Controller" after System Erase. - Replace nested pointer by fixed buffer. SHA-1: 1f1b6145e1f9bd647a9f119cdad34941af2bbb53 [JIT-127001] 15G:SWPT:Jalpa: Redfish: SMBIOS TYPE 42 data not getting populated on AMD platform Redfish driver DellRedfishInterfaceDxe did not published in 15G AMD BIOS. SHA-1: 1556bd827d4f096c8f4fb5f59e09c19e43ebe5f4 * [ESGB-828] Rome RAS Unit Testing. > Disable Periodic SMI generation SHA-1: f2648e5eb102bc2f9b68ea4d127fb1113ab8fff3 [ESGB-828] Rome RAS Unit Testing. > Disable Periodic SMI generation. > Replace with asynchronous SMM storm check SHA-1: 1556bd827d4f096c8f4fb5f59e09c19e43ebe5f4 * [ESGB-828] Rome RAS Unit Testing. > Disable Periodic SMI generation SHA-1: bb22011713fc273a557e510ef293abac4c714eef [ESGB-1224] Revert - Fix "the slot number will be incorrect for some slots on riser 1B/2B/3B/4B" - Not validating EFI_NOT_FOUND and causes Invalid Entries in Chipset_Init_Port_Output Table [ESGB-1090] Revert - Create memory allocation HOB for main BIOS in DRAM - Causes Infinite Loop: ConvertPages: Incompatible memory types, the pages to allocate have been allocated SHA-1: f2648e5eb102bc2f9b68ea4d127fb1113ab8fff3 [ESGB-828] Rome RAS Unit Testing. > Disable Periodic SMI generation. > Replace with asynchronous SMM storm check SHA-1: 3b67bdb53ef40e06e7eb2295cd34ef57f58d25db [ESGB-1057] Hotplug changes pulled in from AGESA 0090 RC1 SHA-1: 1ece28848aa4ddfa81eb4f641f3a7e63c7f375c9 [ESGB-1499] Added SMBUS MUX address information to ROME platforms for SMBUS access purposely. SHA-1: b9efb769641ed875d0ad8de4a776c4773871c96e [ESGB-1316] NPS driver PART 1 SHA-1: ff0a44f2fd86e498bb386d8fd4318bf6ad1b4757 [ESGB-828] Rome RAS porting. - Improve code surrounding RW1C operations on AER RPERRSTS register SHA-1: cea250bfd9a59b816007e40b16ea0b924b1ea395 [ESGB-1199] 15G BIOS Setup Sub Drivers. - Add error handle for no DpiSata protocol. SHA-1: 2d143c1c953fdfe5aeb7f24f0edb506e9b3c4ce5 [JIT-128263] 15G:Swpt:Rome:Alar:AcPwrRcvry User Defined Delay not setting values. - Root cause is UserDefinedDelayValue is not add to AMT table. SHA-1: 4e37b65542e5d10ff89a12874c62e35c4d6015d9 [ESGB-1090] Create memory allocation HOB for main BIOS in DRAM. SHA-1: a8f4bca51824a68f4ab483055a695cb69abd83e5 [ESGB-1224] Fix "the slot number will be incorrect for some slots on riser 1B/2B/3B/4B". SHA-1: a77f9e889fa0de73ac5f07e99869db3ef4d76af0 [ESGB-1010] HiiSetupPkg: Fix that some questions are assigned with wrong question ID SHA-1: a9bc4693a7634f9a806b3c66f0f7c2983dd5e552 [ESGB-810] - Updating FCH module use from Taishan to Huashan SHA-1: 4b22067fe0eaccdf6eaca96f94a43366e5b94f09 [ESGB-1499]: Added Dell SMM SMBUS Access Library Constructor to extract platform memory mapping information. SHA-1: 9ad59aee6d6a078efa49a821c1431af35a5e8558 [ESGB-1499] Added SMBUS Access SMM libraries framework for ROME system. SHA-1: 20eb0f3b5f05561ebdc566ed46c105db0cd05c18 [ESGB-994] Port PEI SPD reader driver to replace SPD in APOB info SHA-1: f704ac6147f5f340f0fd5ef1ef0e0b145513c60f [JIT-123935] - R7425/R7415/R6415 - H330 - Linux - XFS EXT4 filesystem corruption issues Dell change the flag of IVMD to Unity instead of ExclusionRange as several OS (Linux, ESXi) have bugs in their kernel. Also add an extra page if the H330 card (ask for the 8008 pages) to workaround a bug in ESXi. SHA-1: 18f93c6ad907d046f951bf4f96d2e0e2f5c6e24c [ESGB-994] Removed additional obsoleted CPU SPD related information that are not applicable to ROME platform. SHA-1: f5f7e6c7f2226787231a10b7e958d16680f991b5 [ESGB-994] Removed CPU Uncore related behaviors since it's not applicable to ROME platforms. SHA-1: 933a2ebe46124a184b52173bddb3b06401a86380 [ESGB-1204] Add "up-to-date" checking function in setup tool SHA-1: 3749f859b021fb01bc3953a2117ef0b5e5572e07 [ESGB-1199] Fix RSOD for incorrect print type. SHA-1: 392794ddcf309cf723214b7f77c8beaf6da2ee4a ESGB-1321: When SST-BF is enabled, BIOS Setup automaticially enables HwPrefetcher, SST-CP and TurboMode. Removed last statement from SST-BF help description. SHA-1: 8d4fcd683ccbe93011388f5364b9c3ef4d8101aa ESGB-1096: Method to programmatic delete UEFI Boot Options. -fixed build error in 15G project. SHA-1: 2dabc6bff13e08ef9e4b9fd5fc057294dac966b6 ESGB-1096: Method to programmatic delete UEFI Boot Options. -not enabled it yet. SHA-1: dee6becbb97b6429914464875dd73f9f415f0b0f ESGB-554 [WSMT Changes for 15G] -Disabled Valid CommBuffer check for Legacy boot mode at End of DXE. SHA-1: 3748e5bebdbdd9598702f790576721a9631cb833 [ESGB-1199] 15G BIOS Setup Sub Drivers. - reduce code size. - fix network data incorrect issue. SHA-1: 0dc456570af9637998c357c7806800a05ca7c00f ESGB-554 [WSMT Changes for 15G] -Disabled Valid CommBuffer check for Legacy boot mode at End of DXE. SHA-1: 18f93c6ad907d046f951bf4f96d2e0e2f5c6e24c [ESGB-994] Removed additional obsoleted CPU SPD related information that are not applicable to ROME platform. SHA-1: f5f7e6c7f2226787231a10b7e958d16680f991b5 [ESGB-994] Removed CPU Uncore related behaviors since it's not applicable to ROME platforms. SHA-1: ef47f25a19d4f9c3ee9a30c9bdc32fce741e22b9 [ESGB-828] Rome RAS unit testing. > Add code to clear PCIe error status completely in case of hot plug surprise removal SHA-1: 18f93c6ad907d046f951bf4f96d2e0e2f5c6e24c [ESGB-994] Removed additional obsoleted CPU SPD related information that are not applicable to ROME platform. SHA-1: f5f7e6c7f2226787231a10b7e958d16680f991b5 [ESGB-994] Removed CPU Uncore related behaviors since it's not applicable to ROME platforms. SHA-1: 3490adf6bcc0e9456a957c857b16024ec8e71587 (JIT-128021) SWRAID S150 UEFI Firmware v6.0.0.0004 integration SHA-1: e878fc50b46c1a933834f99d33af3ec2235a1230 ESGB-886 porting PciLegacyRasSmi.c code to NbioSmi.c as we do not use PciLegacyRasSmi.c SHA-1: b2f2cb4fc76490c718a70365cbb89540a7cbeff2 [ESGB-1316] Fix NUMA Node Per Socket attribute bug that had option values for enable/disable swapped. Set default to disabled SHA-1: e65de9344afb88537f49447cb42b45dab9164ee1 [JIT-122101] Alar C3/Jalpa C3 Presence detect bit not correctly set in some nvme configurations. > ACPI _DSM porting changes SHA-1: 933a2ebe46124a184b52173bddb3b06401a86380 [ESGB-1204] Add "up-to-date" checking function in setup tool SHA-1: 3749f859b021fb01bc3953a2117ef0b5e5572e07 [ESGB-1199] Fix RSOD for incorrect print type. SHA-1: 9c44369d65ca0dc1b0ba92123b0f2e8c12a9f806 [ESGB-1507] Update RSTe pre-OS firmware with 5.5.5.1005 Pre-OS PV release for Pearl FY20 June Block BIOS release. Update SW RAID RSTe firmaware drivers. SHA-1: 392794ddcf309cf723214b7f77c8beaf6da2ee4a ESGB-1321: When SST-BF is enabled, BIOS Setup automaticially enables HwPrefetcher, SST-CP and TurboMode. Removed last statement from SST-BF help description. **************************************************************************** - Version: 0.3.8 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 4/3/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.1 RC4 for Family 17h * ABL Firmware Version: RABLSSP00812012 * PSP Firmware Version: 00.0C.00.58 * SMU Firmware Version: 36.61.0 * DXIO Firmware Version : 36.580 * uCode : A0-08300023/B0-08301005 * S150 Firmware Version: 6.0.0-0003 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. NVMe is not yet functional on Jalpa C4. JIT-125733: [Jalpa_C4] BIOS 0.3.3 can't install OS due to the NVMe can't be found during OS installation. 2. iDRAC Web GUI and other management tools (such as RACADM and WSMAN) cannot save BIOS changes after apply the ESGB-1010 [15G] HII Setup Modularity ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 0.0.8.1 RC4. 2. Enable 15G BIOS setup feature. HII Setup Modularity and Setup Browser Enhancement. 3. Fix JIT-127018 15G-Alar_Storage-PT: Server stuck at POST after updating BIOS to 0.3.5 4. Fix JIT-127251 COMMs_Emulex_Kestrel : Jalpa - BIOS mode - System stuck in post. 5. Fix JIT-127348 [Alar/Jalpa] System hung at POST with IDSDM(RT6JG and SD card inserted) under BIOS mode after update BIOS 0.3.5. 6. Fix JIT-127070 15G-Alar-SWPT : Server bootup is getting stuck at "Entering Lifecycle Controller" after System Erase 7. Update Code Base to version SHA-1: 60e91f32d0b2ba621ec57a16717dda3379287f7b ------------------------ SHA-1: e42f264dec1fc014726f143e49919f4237767ba5 * Replace nested pointer by fixed buffer. (Fix JIT-127070) SHA-1: 60e91f32d0b2ba621ec57a16717dda3379287f7b * [ESGB-992] Alar/Jalpa. Change the version number to 91.3.8 SHA-1: 8d4fcd683ccbe93011388f5364b9c3ef4d8101aa * ESGB-1096: Method to programmatic delete UEFI Boot Options -fixed build error in 15G project. SHA-1: 2dabc6bff13e08ef9e4b9fd5fc057294dac966b6 * ESGB-1096: Method to programmatic delete UEFI Boot Options -not enabled it yet. SHA-1: dee6becbb97b6429914464875dd73f9f415f0b0f * ESGB-554 [WSMT Changes for 15G] -Disabled Valid CommBuffer check for Legacy boot mode at End of DXE. SHA-1: 3748e5bebdbdd9598702f790576721a9631cb833 * [ESGB-1199] 15G BIOS Setup Sub Drivers. - reduce code size. - fix network data incorrect issue. SHA-1: 0dc456570af9637998c357c7806800a05ca7c00f * ESGB-554 [WSMT Changes for 15G] -Disabled Valid CommBuffer check for Legacy boot mode at End of DXE. SHA-1: 8114ff02eb35557f4930d3d5f4a0a42c4c987929 * [ESGB-1102] AGESA 0081 NDA Integration SHA-1: 380dbbe9f39b159efa998e06a43ef79fcc0b94c6 * [ESGB-1038] Remove ADDDC setup item for AMD platforms as they don't have such setting available. Revert changes in DellBiosAttributes.dat according to Hyper's advice. SHA-1: 1b3864f83885277ae897ee5f3c2a22b9df21c58a * [ESGB-541] move SMA BIOS update more early (before invoke CSM) SHA-1: 8f987c5900945a7ac24afbdb6158fd4fc8cb04fc * [ESGB-1038] Remove ADDDC setup item for AMD platforms as they don't have such setting available. Apply changes according to Rob's reply regarding (JIT-123028) issue. SHA-1: 796788da94662fc32fbe862bcc2b58a9d78601b3 * [ESGB-1010] HiiDebug: Fix ConfigTdp and DirectoryMode cannot be saved SHA-1: 01a97011ff93324c1d54164dca0b57fc99b3fd54 * [ESGB-1204] Correct the string SHA-1: feeb983e65f2c0c24b2fbb4556b366f64ae525f8 * [ESGB-1204]Modify launchprebuild and env path SHA-1: fdfea35329b8496c67069a04a973e9bb02f4e276 * [ESGB-886] Integrate Agesa RC 0081 RC2 to RAS override directories - Build fix SHA-1: 246edc8c38e8777daaaab447aac11cc459d2b944 * [ESGB-994] Removed Memory SPD Access related codes (ReadAllDimm0x02, WriteSPDByteWrapper and WriteSPDWordWrapper) that are not applicable to AMD platforms. SHA-1: 60451bf4129d7bd9fa065eafd0ca722cbb6bc35d * [ESGB-886] Integrate Agesa RC 0081 RC2 to RAS override directories SHA-1: df19ba4fbffbf164559c2538ca4f91da859c78c5 * [JIT-123028] BIOS asked user to save settings when nothing was changed in memory settings. - Set attribute AdddcSetting to "Disabled" if ADDDC cannot be supported (i.e. x8 DIMM's) to prevent it from being changed by Hii Memory Settings prompting the user to save setting. - Removed ADDDC Hii from AMD platforms, applied fix to 15G Intel platforms SHA-1: f1fec384436a9ec9738ea5ea294b8bb2bde22379 * [ESGB-785] BIOS Update. Recovery failed when 16MB running BIOS try to recover 32MB primary ROM with a 32MB BIOS. - Adjust the starting flash address for 32MB BIOS. SHA-1: ce1e87656f4ec8cb21409111d6afffc55f2d3ac2 * [ESGB-1204] add template of 15G setup modularization to AMD. - Enable 15G Setup feature in Alar, Sesto and Roadster platform. SHA-1: 277dfb23fbfdf8166c548020059d0727794c9035 * [ESGB-1038] Fixed : [JIT-122945][15G MC] No memory speed/size in BIOS setup. - Add lost file for build error. SHA-1: 3cb4e1dfeb083686d4ad49c390a592339478aa80 * [ESGB-1199] 15G BIOS Setup Sub Drivers. - Sync DellBiosAttribute.dat. - revert [ESGB-1199] network data incorrect temporary, it may make SCP error. SHA-1: 49aa93b1eb0340c89cbed8a837abe5b94a2b4cb8 * [ESGB-1204]Enlarge Main FV of Alar **************************************************************************** - Version: 0.3.7 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 4/1/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.1 RC2 for Family 17h * ABL Firmware Version: RABLSSP00812011 * PSP Firmware Version: 00.0C.00.58 * SMU Firmware Version: 36.60.0 * DXIO Firmware Version : 36.580 * uCode : A0-08300023/B0-08301005 * S150 Firmware Version: 6.0.0-0003 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable Virtualization Technology to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. NVMe is not yet functional on Jalpa C4. JIT-125733: [Jalpa_C4] BIOS 0.3.3 can't install OS due to the NVMe can't be found during OS installation. 2. System hang up at the OPRom loading during POST in BIOS mode. JIT-127018: 15G-Alar_Storage-PT: Server stuck at POST after updating BIOS to 0.3.5 JIT-127251: COMMs_Emulex_Kestrel : Jalpa - BIOS mode - System stuck in post. JIT-127348: [Alar/Jalpa] System hung at POST with IDSDM(RT6JG and SD card inserted) under BIOS mode after update BIOS 0.3.5. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Support for 32MB image. And support for both AMD A0 and B0 CPU. 2. Fix JIT-126394 [Alar/Jalpa] BIOS 0.3.4 can't find SATA ODD device on slimline SATA_A port 3. Update Code Base to version SHA-1: a17ca56e7ea2f3b213dd3e16540f59d842f7fc5e ------------------------ SHA-1: a17ca56e7ea2f3b213dd3e16540f59d842f7fc5e * [ESGB-992] Alar/Jalpa. Change the version number to 91.3.7 SHA-1: ab06bf9c4e20d61abba4ed877ac0a054839174b1 * JIT-126394 [Alar/Jalpa] BIOS 0.3.4 can't find SATA ODD device on slimline SATA_A port. set SATA gen 2 and 1 to AMD default value SHA-1: a83522606f96b66a2eedaee41c5e881cff4e434b * [ESGB-1010] HiiSetupPkg: Update form ID with auto generated question ID SHA-1: 437f4170cf7e0a1993f3eb617e7b9d19ab92915e * [ESGB-781] Enable "iDRAC Direct USB Port Support" for Alar, Sesto, and Roadster. SHA-1: 3aff83086a92fe1c4b6a19d1e21107ac0594aaa8 * [ESGB-1001] SPI Development. - Stall 1 second after chip switch. - Cache dynamic PCD value for SMM access. SHA-1: 447db689a0905e62867e8b7daf33f4555618cd92 * [ESGB-832] Virtualization - IOMMU: Separate IOMMU feature from Virtualization setup option to have independent control. SHA-1: c1a7e6d8e984e83a72ad065278e68c4c7f9e10bf * ESGB-554 [WSMT Changes for 15G] -Fixed error in AuthenticatedBiosUpdateSoftSmm -Disabled Valid CommBuffer check for Legacy boot mode. SHA-1: 57ab96b16ec8867f183370a1e3225ce4ffc7afdf * [ESGB-1010] Remark SETUP_MODULARIZATION=TRUE in makea.bat for Alar SHA-1: 6cf877ae8de3e05512be8874fd5519f5f1a0b302 * [ESGB-1102] AGESA 0081 RC2 Integration PART 4 - Merge support for 32MB image SHA-1: 90e44908f44cec723cf99c2abe22d26faa220ba6 * JIT-127294 Added code to bypass F1/F2 prompt and associated error displays/halting. SHA-1: 78022148cbe685b3014ee0ad88b6f78acbb969ad * [JIT-124524] partial reverts commit 9827052493385ca4b0306115c9ac0f629b01be5f to avoid RSOD SHA-1: 9c7207b04032fc02ac92adee61c64ee80654b4ee * [ESGB-1204] add template of 15G setup modularization to AMD SHA-1: 3e7c1aa58c0ef0a2fac717e1b2eeb1234dc15155 * [ESGB-1199] Fix network data incorrect. - root cause is system can not get NIC numbers in LaterInit phase. SHA-1: 9827052493385ca4b0306115c9ac0f629b01be5f * JIT-124524: DLP report issue. -REVENTON project may RSOD when Harddrive attched in embedded SATA port. this just for avoid when device path is null, but not sure why REVENTON project have null pointer in DLP table. SHA-1: 897d629e1523593486cab13c3530411b8d731c28 * [ESGB-1010] DellHiiSeteupPkg: Define Question IDs for IFR questions added at run-time SHA-1: 80466415d747821c72538a8bdbf39d0996f0d3f7 * [ESGB-1057] Cordoba descriptors fix for Jalpa C4 x16 entries SHA-1: 065945b8f3aaa0819e0534dc534038244d024c62 * [ESGB-1010] Fix build error on sesto when SETUP_MODULARIZATION=TRUE SHA-1: 75e0bb9f1a70f2692a238d99b4a12e0b30a3570c * [ESGB-1500] Fix for GetTpmId() for 15G or newer platform. SHA-1: c5d286289e600e82a2bcea710cdcafb22f1ddcf7 * [JIT-123935] R7425-H330-RHEL7.5/7.6-XFS/EXT4 filesystem corruption issue Description: The combination of (AMD platforms + H330 + Linux base OS in XFS or EXT4 filesystem) could have data corruption randomly. Root cause: Linux AMD_IOMMU driver accidentally used the same memory range (BIOS reserved for H330) for both IO data buffer and IO virtual address for accessing different physical memory area. SHA-1: 2881bdc24af4165c89a44627bb12ce550b3d24f6 * [ESGB-1199] 15G BIOS Setup Sub Drivers. - Sync [ESGB-1341] Add code to reveal PCI root ports as an HII integrated devices menu option. - Modify SetNvramConfigData. SHA-1: a1c9ea69ed7856780b5965b4debc9279d0049312 * [ESGB-994] Removed WriteMSRsToSPD behaviors not applicable to ROME platforms and added the status check for WriteSPDBlock behavior. SHA-1: 3be5cf271ba1c06b3423b424e3187fd8ee9417fa * [ESGB-994] Checked the package length to avoid overflown transaction size limitation. Validated additional command responses with non-zero completion status (I2C transaction failure, node-busy and unsupported transaction or device type). SHA-1: 655705f4064a88c68cfd29813128da113c3a9d37 * [ESGB-1010] DellHiiSetupPkg: Generate varstore ID in setup prebuild script This is to make sure each variable store ID is unique in setup drivers **************************************************************************** - Version: 0.3.6 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 4/1/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.1 RC2 for Family 17h * ABL Firmware Version: RABLSSP00812011 * PSP Firmware Version: 00.0C.00.58 * SMU Firmware Version: 36.60.0 * DXIO Firmware Version : 36.580 * uCode : A0-08300023/B0-08301005 * S150 Firmware Version: 6.0.0-0003 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable “Virtualization Technology?to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. 6. To flash BIOS from 0.3.5 to 0.3.7, please flash BIOS to 0.3.6 first. After that, BIOS can then be flashed from 0.3.6 to 0.3.7. - Only support EFI update at 0.3.6 version - Disable password jumper before update bios 0.3.6. (Refer APB #13 picture PWRD_EN jumper, 1-2 is enable, 2-3 is disable) ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. NVMe is not yet functional on Jalpa C4. JIT-125733: [Jalpa_C4] BIOS 0.3.3 can't install OS due to the NVMe can't be found during OS installation. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. SHA-1: fc173ade5b3b24fe1a7797b49aad51baa48a7855 * ESGB-554 [WSMT Changes for 15G] -Fixed error in AuthenticatedBiosUpdateSoftSmm -Disabled Valid CommBuffer check for Legacy boot mode. 2. SHA-1: 4e25b83d14de034fca2bc1cd04bd3fa9940810c3 [ESGB-992] Alar/Jalpa. Remove PayloadAuthenticated as workaround at BIOS 0.3.6 **************************************************************************** - Version: 0.3.5 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 03/27/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.1 RC2 for Family 17h * ABL Firmware Version: RABLSSP00812011 * PSP Firmware Version: 00.0C.00.58 * SMU Firmware Version: 36.60.0 * DXIO Firmware Version : 36.580 * uCode : A0-08300023/B0-08301005 * S150 Firmware Version: 6.0.0-0003 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable “Virtualization Technology?to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. NVMe is not yet functional on Jalpa C4. JIT-125733: [Jalpa_C4] BIOS 0.3.3 can't install OS due to the NVMe can't be found during OS installation. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 0.0.8.1 RC2. 2. Update Code Base to version SHA-1: 64f5d30d1990c9be93b04fc49e14a951bd636a89 ------------------------ SHA-1: 64f5d30d1990c9be93b04fc49e14a951bd636a89 * [ESGB-992] Alar/Jalpa. Change the version number to 91.3.5 SHA-1: 84abf99621081f1e7ffa4f5914d4afa9773692f2 * ESGB-554 [WSMT Changes for 15G] -Enabled WSMT for 15G Alar platform. Mid PT phase. If any SMM handler Rsod's on X-Rev, please forward it to Jayanth_Raghuram. SHA-1: ce78cc4b2f3824ff1c3f55eb22403e30b1e43c5f * [ESGB-994] Fixed an issue where the data size was not populated correctly during Read/Write data block process. SHA-1: dbfddd9c4111c23fbe5fcdfda5502424ae11c2ef * [JIT-122398] Jalpa C3 NVMe _DSM is Missing or Incorrect > Final adjustments based on storage team initial testing results SHA-1: 433cccd8c5beff6f38f4cd9f464c31ed11c96ffd * [JIT-122827] The Data Link Layer Link Active Bit on AMD Root Ports is Remaining Set when Intel P4800X is Put into D3Hot and the Link is Disabled SHA-1: 41e3747ac785cf80c61cec74021a9ee3fa178e53 * [ESGB-828] Port recent Rome RAS unit testing bug fixes to Naples SHA-1: 30927e8a173c88d6528531ecdaa847261d2c9041 * [ESGB-1001] SPI Development. Invalid the cache ONLY when the input address is memory mapped. SHA-1: 775746f999b9f943555ed2113856f2565b5e692a * [ESGB-648] A0 and B0 processor support Add change to let FMP can flash a 32MB BIOS image from a running 16MB BIOS. - Using .efi utility with password jumper inserted. - Using DUP. SHA-1: 537380f79874eff52784f239f4b08085e1452f08 JIT-124524: DLP report issue. 14G ODD will report AHCI.SATAEmbedded in AHCI mode update it to Optical.SATAEmbedded. issue: 2.2.4 Atlas release can't boot and RSOD on Pearl SHA-1: 233fbd046a12a22585004885b03775c7f0796d29 [ESGB-1102] AGESA 0081 RC2 Integration PART 3 - Fix Assert fix for AMD_CPM_DXIO_TOPOLOGY_TABLE becoming to large for generating a GUI Hob - Null pointer fix in serial debug out put in DellChipsetMemInfoDxe.c SHA-1: 12929a546dd5999c5039c812866f78557f032242 [ESGB-1341] Change code to avoid breaking debug menu disable SHA-1: 09f871d9fa0cd7883cb084229b3571dfa908a21c [ESGB-1102] AGESA 0081 RC1 Integration - RAS SHA-1: ceff54fd3e51256071031351ce0c42d15837a86d [ESGB-1204] update process of DellAutosource.mak , delete PlatformConfig.dsc SHA-1: e44aa0aa8ac1b8adb7abbb664d1d8af395d83ce8 [ESGB-1199] Modify setup in dsc SHA-1: 804175295f8728030e594122ec50abf27e3db5a1 [ESGB-1102] AGESA 0081 RC2 Integration PART 2 SHA-1: a1fea18c2276f40ef7c311b3662a34947125ba3e [JIT-124377] DSS9630 Without signal bacle between MB and NPDB BIOS should pop up F1 message. SHA-1: e188d0b6681c72fe96a112357e27f5d6f807b1c0 [ESGB-1102] AGESA 0081 RC2 Integration SHA-1: 5b15f2caac3bf4a0966f71dcbaef719801077cac [ESGB-994] Updated SPD Byte/Word/Block routines with IPMI DIMM Access interfaces. SHA-1: 61c330a899a12653f549c113a12a708258e18c79 [JIT-126093] We enable UR error on PCIe 1.1 compliant device only, However, some OS re-enable UR on PCIe 1.0 device based on _HPX causing the system to crash on CfgRd during enumeration. Since it's not feasible to update _HPX to check for 1.0 device, need to add a work around in the UR SMI handler to ignore UR and disable UR on PCIe 1.0 device. **************************************************************************** - Version: 0.3.4 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 03/22/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.1 RC1 for Family 17h * PSP Firmware Version: 00.0C.00.56 * SMU Firmware Version: 36.54.0 * DXIO Firmware Version : 36.572 * ABL Firmware Version: RABLSSP00812010 * uCode: A0-08300023/B0-08301005 * S150 Firmware Version: 6.0.0-0003 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable “Virtualization Technology?to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. NVMe is not yet functional on Jalpa C4. JIT-125733: [Jalpa_C4] BIOS 0.3.3 can't install OS due to the NVMe can't be found during OS installation. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 0.0.8.1 RC1. 2. Enable Alar/Jalpa SATA ports PHY fine tune and update complete de-emphasis settings (-6.35dB). 3. Fix JIT-121941 R6515 Alar C3 reports a link training error on unreported device during boot 4. Fix JIT-122398 Jalpa C3 NVMe _DSM is Missing or Incorrect 5. Fix JIT-123448 Alar/Jalpa BIOS: Windows NIC Consistent Device Naming in Network Connections is incorrect 6. Fix JIT-122946 COMMS_NIC's port name is showing as "PCIe SDD in Slot 13 Bay 1 & PCIe Root Port 2 " In Windows 2019 Network connection page 7. Fix JIT-124243 ALAR: Server hung in Loading PCIe Devices while updating the BIOS firmware from 0.3.0 to 0.3.1. 8. Fix JIT-122220 R6515 Alar C3 hard hang after surprise remove 9. Fix JIT-122420 (ALAR) (S150) NVME drive slot is not displayed in Slot 1 even with latest bios 0.2.4. 10. Fix JIT-125793 COMMS_Solarflare_Planet9 : RHEL 7.6 OS is not booting to OS if we enable Virtualization Technology in F2 System BIOS Processor settings 11. Fix JIT-125064 15G:SWPT:Alar :Unable to install SLES 15 operating system on ALAR server 12. Fix JIT-124286 15G-Alar_Storage-PT: SLES15SP1 fails to load after installation on H730P mini with SATA SSD non raid drive 13. Fix JIT-125523 [Alar/Jalpa]Cannot boot to RHEL7.6 installation page with H330 when VT is Enabled 14. Fix JIT-125532 15G:SWPT:Alar:PCIESSD in Slot 9 is getting reflected as Drive inserted in Slot6 in Firmware inventory 15. Fix JIT-125531 15G:SWPT:Alar: PCIESSD in slot 9 is not getting detected After BIOS update to 0.3.3 16. Fix JIT-125525 15G:SWPT:Alar: PCIe SSD drives are not listing after updating BIOS to 3.3 from 3.2 17. Fix JIT-125441 [Jalpa C3] System Hang (SMI Storm) when Booting with Any NVMe Drives in the System 18. Fix JIT-124850 [Jalpa] Abnormal message of "Firmware Bug" about AMD-Vi IOAPIC from system log via SLES 15 SP1 Beta 4. 19. Fix JIT-122859 OM931:OMSA: DIMM Memory technology showing blank in omsa 20. Fix JIT-123331 15G:SWPT:Alar: Memory Technology parameter is displaying as Not Available for DIMMs 21. Fix JIT-124413 SWRAID 6.0-15G: BIOS DUP file listing Unsupported Server. 22. Fix JIT-118024: [Alar/Jalpa] (BIOSUT) BIOS setup pop up a Saving Changes error massage when save changes. 23. Fix JIT-119584: [Jalpa]24NVMe BP_System became RSOD when boot option over 8 partitions in UEFI mode. 24. Update Code Base to version SHA-1: 5c9e629d9226ac02e1d1f5d685a9f76df35c376f ------------------------ SHA-1: ddc3acda6601c2146bcfe70a441bd0e877f82547 * [JIT-121166] MPS changes with the workaround for the AMD issue ECET-7731 SHA-1: 5c9e629d9226ac02e1d1f5d685a9f76df35c376f [ESGB-992] Alar/Jalpa. Change the version number to 91.3.4 SHA-1: cd2267cbf896cf6667f1d5c7edc6aad25b8f4bed [ESGB-994] Do not set Warning Threshold Exceeded level until RAS code fully defines the behaviors. SHA-1: 113e1a7c0e3aa5eed6709941e5b10b95b14c59aa [JIT-125414] BIOS Needs to Set the "ACS Request Redirection to RC" Bit for 15G (AMD and Intel) SHA-1: 5078ff26984e8474c2c05626c198ffd386d7c8b2 [ESGB-1201] Fix ASSERT when LoadDefault parameter of UpdateAttributes() is NULL The LoadDefault parameter is optional, need to handle the NULL case SHA-1: ea1528f20b4e48585765232c18fd766be7ae4011 [ESGB-1199] Update 15G setup sub driver SHA-1: 982dabbf96ecee6910d0c10610104e92339d1cf6 ESGB-1192: provide a method to support user could get bootoption status from SetBootOrderEn/SetBootOrderDis attribute. --JIT-119584: [Jalpa]24NVMe BP_System became RSOD when boot option over 8 partitions in UEFI mode --arrtibutes max support 255 unicode strings. SHA-1: 4c9ed0cee9a8f738690bc8c9e6bb3a571305bc44 [ESGB-1351] Problem: Build with ODM_BUILD=1 would fail due to lack of library INF files in DellRestrictedBinaryPkg. Solution: Add back DELL changes in EDK2 build tools from b664064d7b removed by b1094e4473. Result: all INFs we need to use in DellRestrictedBinaryPkg would be generated. (cherry picked from commit 6a79bde53cead27fd20a5c8ef98575b052b64518) (Added # _Dell_ comments for future code merge reference on top of cherry pick) SHA-1: 5ab84855d72d30a86084d3f0e114d8bfa0ac0a95 [ESGB-1351] [Gemini] EDK2 sync to 12/28/18 Removed PerformancePkg reference from DellSbSmmLibWhitley.inf. PerformancePkg has been removed from EDK2 open source. Removed building the DP.EFI utility from 15Gcommon.dsc. The utility has been replaced with a EFI Shell Dynamic Command Line driver. SHA-1: 169899236b56d248a6d8170a4819ecc5f04f4135 [ESGB-1351] [Gemini] EDK2 sync to 12/28/18 Removed PerformancePkg and DxeSmmPerformanceLib. These have been removed from the EDK2. SHA-1: dc116f61daa5168af07e0ba72278074d432865ab [ESGB-994] Added IPMI synchronous transaction for Read SPD Byte/Word/Block data and asynchronous transaction for Write SPD Data block behaviors. SHA-1: 8cc21459b86a3401c6cea0648f57acc1b998d646 [ESGB-994] Added additional SPD Read Byte/Word/Block data functions with SMM IPMI interface. SHA-1: cf0f572eed8111a161f8af322521612b35123fcb [ESGB-994] Updated DIMM Access commands for general DIMM devices purposes instead of strictly to SPD device only. Added additional reserved bytes for both SET/GET DIMM information commands for future DIMM device expansions. SHA-1: d760b2298628d464928a1ad35abb0acc11f84ebc [JIT-125414] BIOS Needs to Set the "ACS Request Redirection to RC" Bit for 15G (AMD and Intel) SHA-1: 25b1b9adb9d565d88f648c8f26de30e065e06881 [ESGB-992] Alar/Jalpa. Update _DSM for slots and LOM SHA-1: eb8c9a96d5bc2a0df58443fc77e4c96728290ead [ESGB-1057] Fix for Hotplug issues on Alar and Jalpa C3 configs. Some changes pulled in from 0081 RC1. SHA-1: 18de104aac4b81432b8ea0d8c201de7592dcd934 [ESGB-886] Revert SHA-1: cacc800ca7572f440a54a0412e3bb68c27b07ddf SHA-1: 12fdb9d091f0d120d9a46ab264d2bd246e64f918 [ESGB-886] National Instruments PCIe issue > Add UR handling code to disable UR reporting on PCIe v1.0 devices SHA-1: 01edba4d010f6f2a9d521281805b66c1bb925056 [ESGB-785] BIOS Update The detection of split ROM enabled transition should consider 32MB BIOS. SHA-1: 3a3fe884187632d577da64a2e87e05f6bfbfe813 [ESGB-1204] Sync 15G setup AWK makefile SHA-1: 6f269509f59ea33ab257913934cd52c24fb1f280 JIT-125934: SWRAID S150 UEFI Firmware v6.0.0.0003 integration SHA-1: aa731c9d2d5c79f1a2d3685dd034d8db0413d027 [ESGB-1199] Update 15G setup sub driver SHA-1: a8536d859d88bbdf5ce043029487b61f3efb09c8 [JIT-118024] [Alar/Jalpa] (BIOSUT) BIOS setup pop up a Saving Changes error message when save changes. SHA-1: 0cf0c553e14e36ceafbdc66049bfd35488ef6f38 JIT-122639 [Taurus-SIT-MLK]: Some failed items shows in SCT report after perform SCT testing with 2.6A rev. - Fixed that "NvramAttribute.efi MemFrequency MaxPerf" failed with EFI_WRITE_PROTECTED (when current value is MaxPerf) This issue caused by AreAttributesIdentical() of NvramAttribute driver returns false due to the flags compare result, it then cause InternalSetAttributeValue() return EFI_WRITE_PROTECTED because the value of MemFrequency is controlled by parent. SHA-1: 574e165d20dc35a6d1f661c64e1c267efbdb3216 [ESGB-872] ROME CSM - Fix "Console Redirection" cannot output to SOL window with ipmitool after booting(INT19). SHA-1: e6f013eefa9e77c48538fdbec97071fde3d72159 [JIT-125064] 15G:SWPT:Alar :Unable to install SLES 15 operating system on ALAR server. Solution:Need to report IVMD block in IVRS ACPI table for H330/H730 on AMD Vi. Defer IOMMU initialization till BDS ConnectAll so that all PCI devices are managed and we can know is there any special memory need to report in IVMD. note: The solution is leveraged from NF as description below. "Refs ticket:1033"... SHA-1: 6866588b7ae3e743dd1d299534147a2be4e8cf1d [ESGB-1001] SPI Development. Don't add 16MB offset aperture if the flash part is just 16MB. SHA-1: a8a673e89826a15be82d6e485c3afb1f94686839 [ESGB-1102] AGESA 0081 RC1 Integration SHA-1: 0230a874eaafd0f6ee38ce279ddc9d112c90e33f [ESGB-1314] DXIO Phy Customization Interface Enable Alar/Jalpa SATA ports PHY fine tune and update complete de-emphasis settings. SHA-1: 94acb04116ec3ab50e9629bad7b642b98ebe048a [ESGB-1204] Modify prebuild script to generate reserved ID for DYNAMIC QID SHA-1: 1a164dfde5751855e1ff1bab39e612698f7231b6 [JIT-123331] Memory Technology parameter is displaying as Not Available for DIMMs Implement Memory Technology related field in ChipsetMemInfo driver to provide additional information in SMBIOS table Type 17. SHA-1: f61a6792b78fe4625242bdefff12f898ddb647fc [JIT-124975] 14G MLK: SMA path failing on set of PmPersistentPercentage, attribute is disabled. -Add ProgUnhide modifier to prevent SCP write checks into Access Denied error. SHA-1: 68069df0907a2b9d0b60105f28f5d7feb4c43d1c [ESGB-553] [HSTI] Move SmmLock after gEfiEndOfDxeEventGroupGuid signal. Signals gEfiDxeSmmReadyToLockProtocolGuid listners. SHA-1: cb078c2f1f476a7a11af1ab5608b5aacf8a44a93 [JIT-125414] BIOS Needs to Set the "ACS Request Redirection to RC" Bit for 15G (AMD and Intel) SHA-1: 02ee37fd01b153ebe05d96701863f2ef236ef455 ESGB-886 use X2apic Library SHA-1: d8997c3f2330e41609f2ad257f6a6978619c4cc2 [ESGB-1199] Update 15G sub driver SHA-1: 3a961b28737c83bcd1aa8ee669f7af95f83ae7ee [ESGB-1001] SPI Development. SHA-1: 1c492e34a8fca0b2ba3106527aa9bf7f4549e275 JIT-122795: 14G: Unable to set BOSS card as placeholder in boot sequence (PSE-6697) -IPS request to support placeholder support for DELL BOSS card. SHA-1: 592797aef00090bae4186789e1476c02ffbf1945 [ESGB-994] Removed unused global variable of gLogSpdAtRunTime to avoid any unexpected issue. SHA-1: 1f2cd768f02fb6fefdba77a09122341de7c0c52b [ESGB-994] Updated DellMemSPDAccessSmm protocol with newly added function of LogSpdAtRunTime to set global variable for SPD log in OS Run-time. SHA-1: 9f58571285fd86c323c8077dab5ac48679741e36 [ESGB-1351] Fix function names inside Fdfparser.py file for BaseTools EDK2 merge SHA-1: 54aa772f60b9ea491fa66e644ab7dbd0d982b2c3 [ESGB-1351] Merge BaseTools, StdLib, and StdLibPrivateInternalFiles folders from EDK2 December commit. SHA-1: 58e33843b8e5a9f59aa55ccea6aeb341229f7a11 [ESGB-994] Added code to check whether the error was reported in OS Run-time or not and then log SPD via IDRAC SMM IPMI interface. SHA-1: 526ac74995d5b5a666b36655a397c08198643098 [ESGB-1351] [Gemini] EDK2 sync to 12/28/18 SHA-1: 9f58571285fd86c323c8077dab5ac48679741e36 [ESGB-1351] Fix function names inside Fdfparser.py file for BaseTools EDK2 merge SHA-1: 54aa772f60b9ea491fa66e644ab7dbd0d982b2c3 [ESGB-1351] Merge BaseTools, StdLib, and StdLibPrivateInternalFiles folders from EDK2 December commit. SHA-1: 3b9cc03463f30cae31fd67265a1e5e782290ca75 [ESGB-1351] EDK2 sync for DxeCore, DxeIplPeim. Can build but loop in xhci code during POST. SHA-1: 526ac74995d5b5a666b36655a397c08198643098 [ESGB-1351] [Gemini] EDK2 sync to 12/28/18 SHA-1: 303be9b23f53035a0d9dcef3e6cc11ce80c75f46 [ESGB-1351] Sync up EDK2/NetworkPkg (can build) SHA-1: 2a436e65843a262c4cdbb9bd517f5af81165b806 [ESGB-1199] 15G BIOS Setup Sub Drivers. - Sync with SWV_ModularSetup branch. SHA-1: 0bcca69243132bc96aa7ab1a903b26f90c78deae [ESGB-785] Prevent DellFirmwareManagementDxe from linking the library AmdS3SaveLib which will use dynamic PCD. SHA-1: a8d7325abe6c8f1940dca999cd7cb850df1a42d2 [ESGB-1151] Update Dell15gCpldLib.h for MonteCarlo SHA-1: 31e86cd670cff27e919a0fabc93adf37d035b911 [ESGB-1151] [JIT-114622] SPI Flash Descriptor protection by extending SPI Protected Ranges to include SPI Descriptor and ME region (start from 0). - Support the start code region lower than write protected region. **************************************************************************** - Version: 0.3.3 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 03/15/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.0 RC5 for Family 17h * PSP Firmware Version: 00.0C.00.54 * SMU Firmware Version: 36.55.0 * DXIO Firmware Version : 36.572 * ABL Firmware Version: RABLSSP00802012 * uCode: A0-0830000B/B0-08301002 * S150 Firmware Version: 6.0.0-0002 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable “Virtualization Technology?to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-118024: [Alar/Jalpa] (BIOSUT) BIOS setup pop up a Saving Changes error massage when save changes. Workaround: Clear NVRAM by NVRAM_CLR jumper. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-121941 R6515 reports a link training error on unreported device during boot. 2. Fix JIT-122373 Jalpa Default Max_Payload_Size of 256B Doesn't Work when Endpoint is Capable of Greater than 256B. 3. Fix JIT-121953 Alar, BIOS 0.2.3, PCIe training error after updating to 0.2.3 4. Fix JIT-123994 Alar C3: System Hangs at Post with BIOS 0.3.1 when there is a device in Slot 0 Bay 1. 5. Fix JIT-122141 [Alar/Jalpa] Display incorrect string "S140" after change to Raid mode in NVMe setup page. 6. Fix JIT-123619 [Alar/Jalpa] System should not support zero option on NUMA Nodes Per Socket function under BIOS. 7. Fix JIT-123710 [Alar] BIOS hang at POST "Initializing PCIe , USB and Video....." when the NVMe devices install in HDD tray Slot-0 and Slot-1. 8. Fix JIT-124197 System stuck at black screen on next boot after manually changing the PCIe lanes under BIOS 9. Fix JIT-124243 ALAR: Server hung in Loading PCIe Devices while updating the BIOS firmware from 0.3.0 to 0.3.1. 10. Fix JIT-124693 12SAS+12universal BIOS hang at POST "Initializing PCIe , USB and Video....." 11. Update Code Base to version SHA-1: 1a1e7fdae188e7f1cdeb8cbe103235e1e681246d ------------------------ SHA-1: 1a1e7fdae188e7f1cdeb8cbe103235e1e681246d * [ESGB-806] Adding back some changes that got removed with the previous check in made for PCI Slot Bifurcation Feature SHA-1: 71d3a0806c04e01386c8e6944de9d681deebf53e * [ESGB-1057] Changes to pass device function overrides for Jalpa C4 only. This needs to be reverted once AMD fixes the overrides issue. SHA-1: 7e166ad0d2599fb3e13d8ec9d3eead59ce8314ec * ESGB-1321: added PBF capability variable, fixed oneof order, added dependency on Turbo Mode SHA-1: 3facfbf45d20268dd1927bca78aa93f697c6b99b * [ESGB-992] Alar/Jalpa. Disable serial output. SHA-1: 40f7fecd507f561b65ae482fc495df79cc61d7af [ESGB-992] Alar/Jalpa. Change the version number to 91.3.3 SHA-1: cc2b58350a47e3c49f92f639e6d5b91212d08be9 [ESGB-1341] Change "Root Device Device Unhide" to "Empty Slot Unhide" and update the help text. SHA-1: 0e3b95310d7a7ac2df0327b4c4eee333024e5835 [ESGB-1341] Add code to reveal PCI root ports as an HII integrated devices menu option. SHA-1: 6d5a125d184e9006621d14658d9ad7c545be0689 [ESGB-992] Alar/Jalpa. Correct USB ASL code. - Alar support one Front Port, and Jalpa support two Front Port. SHA-1: 5beb75777f027411235b8ef2a6601538f827385a [ESGB-1199] Update 15G setup sub driver Move SLED Mismatch driver DellSledChassisDxe.inf to platform layer because not all projects using 15G CPLD LIB. [Detailed Description] Set CLOUD_SUPPORT to FALSE temporarily SHA-1: 293b64d885536940e76d2cc9fa91b7fa07ee16f8 [JIT-122623] MPS changes ported from Naples to Rome. SHA-1: d6c43d455113a7c33794aa010e4153d444fdf8f2 [ESGB-1204] patch the prebuild process after the update of EDK Basetool SHA-1: bca738213337f6aae01c6f4c19ab757f351d46db [ESGB-806] PCI - Slot Configuration- This change enables Slot Manual Bifurcation Added fix to avoid loading PciChipsetPeim and PciChipsetInitPeim at the same time. SHA-1: 161315dcfd417365dbac65522028244dc94d5248 [ESGB-1351] [Gemini] EDK2 sync to 12/28/18 -Fix Progress bar not running. SHA-1: 4ddc9cb1816f5d96cc02eace178b792be7ba8b0e [JIT-122398] Jalpa C3 NVMe _DSM is Missing or Incorrect SHA-1: cd460b139ec629695c8751379228adfc72408a53 ESGB-1351 * Update Shell binary and source packages. * Fix up buildsingle.bat to create a couple of directories if they don't exist. SHA-1: b456f0fda471a9631b0d6efb8a9dd9c75ef63329 [ESGB-992] Set write protected only for the range from 4G-16MB to 4G for BIOS memory mapped. SHA-1: be2e4e98c65a7893af2bc208dc4e594da3eaca56 [ESGB-992] Alar/Jalpa slot disable attribute HII issue SHA-1: a5c407ce31381ae826c2ac5a588b2043e25d2c53 [JIT-122141] Update NVMe Hii page to display S150 info instead of S140 SHA-1: de90cbc41c770c53d5a82ef3afd3b1dcb54215ec [ESGB-1057] Hotplug changes for simplepresence hotplug type on Alar and Jalpa cpu direct configs SHA-1: c30971cf0a87bb0abe61ace704c793dd350a90ac [ESGB-994] Rome DIMM SPD Logging porting This reverts commit 55026e037dc0554174445fe33dd875fd5dcffb8d. SHA-1: da93eafc71ebd114a62436b4eb14ad50710f1c6f [ESGB-994] Rome DIMM SPD Logging porting SHA-1: b5a7006cc3b4b7c7e7f81e9443940e65a8bb2d72 JIT-124524: DLP report issue. SHA-1: 55026e037dc0554174445fe33dd875fd5dcffb8d [ESGB-994] Rome DIMM SPD Logging porting > Push SPD page switch logic into DIMM SPD CPU library SHA-1: 57f7af6904f7f92e0283c49c3f3f890c82eedfaa [JIT-123619] System should not support zero option on NUMA Nodes Per Socket function under BIOS. SHA-1: 6dcaa5a5fe8f9045f773786b37973a71d201a667 [JIT-124291] Add DellSataLib to Rome chipset package to dynamically enbale/disable SATA controllers based on the platform and configuration for S150 SHA-1: d9bf0b0bd47a0d3884d4de230f2c7a731057ccb7 ESGB-886 support PPIN part2 SHA-1: 876d4b26aa22365511d1941eb9bca13c10299123 [ESGB-994] Rome DIMM SPD Logging porting > Remove DIMM fixup code in DellMemSPDAccessSmmLib constructor > Add DimmNumber field to Dell Memory Interface DXE driver instead SHA-1: c3eb11068f0ddf5c9d3964f8442ae4fcc9443c0a [ESGB-1207] HII POPUP Protocol Support - Fix ODM build fail SHA-1: e3a184ac27b7847216b4b3ae94a0bd9b884a8408 Revert "[ESGB-1210] Story 20: When the browser saves settings, save settings changed by the user." This reverts commit 179f8145062c0a0756ebe2a42c74ae0c95298bd2. SHA-1: 2c6cb7693923fdaf78fbb17f1195e9f91a714f67 * * [JIT-122946] COMMS_NIC's port name is showing as "PCIe SDD in Slot 13 Bay 1 & PCIe Root Port 2 " In Windows 2019 Network connection page SHA-1: b6fded110c55c9f56ef45a3d58c820fbaaabc684 [JIT-122946] COMMS_NIC's port name is showing as "PCIe SDD in Slot 13 Bay 1 & PCIe Root Port 2 " In Windows 2019 Network connection page SHA-1: 3757b2b1b0b85ddda5125f74b748288e704c8176 [ESGB-1351] Fix function names inside Fdfparser.py file for BaseTools EDK2 merge SHA-1: b1094e44737bcb087a327af8bc7c42e6d469bc5b [ESGB-1351] Merge BaseTools, StdLib, and StdLibPrivateInternalFiles folders from EDK2 December commit. SHA-1: 51ea29b3b2489a6bb08ed153d157ef1af08af155 JIT-118432 - Junk screen is seen in boot capture file when Embedded Video is disabled : Display new video message only once in the case where boot device is not present or not first on the list. **************************************************************************** - Version: 0.3.2 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 03/08/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.0 RC5 for Family 17h * PSP Firmware Version: 00.0C.00.54 * SMU Firmware Version: 36.55.0 * DXIO Firmware Version : 36.572 * ABL Firmware Version: RABLSSP00802012 * uCode: A0-0830000B/B0-08301002 * S150 Firmware Version: 6.0.0-0002 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable “Virtualization Technology?to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-118024: [Alar/Jalpa] (BIOSUT) BIOS setup pop up a Saving Changes error massage when save changes. Workaround: Clear NVRAM by NVRAM_CLR jumper. 2. JIT-123710: [Alar] BIOS hang at POST "Initializing PCIe , USB and Video....." when the NVMe devices install in HDD tray slot-0 and slot-1 Workaround: If the system is installed with more than two NVMe devices, please do not install NVMe devices in HDD tray slot0 for Alar-C3 configuration ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 0.0.8.0 RC5. 2. Fix JIT-124207 COMMs_Intel_Ramona - OPROM Navigations are Very slow on Alar platform in BIOS Mode 3. Fix JIT-122775 SWRAID 6.0 - 15G: S150 OpROM GUI is hanging on Alar with 0.3.0 BIOS 4. Update Code Base to version SHA-1: 0a29b46dca58983189843f4ff80d68bfd0571ee2 ------------------------ SHA-1: 0a29b46dca58983189843f4ff80d68bfd0571ee2 * [ESGB-992] Alar/Jalpa. Change the version number to 91.3.2 SHA-1: 0e3ff1ee7ee284291b4df456ec40c29b49d9e3ac * [ESGB-1199]Sync up HiiDebug SHA-1: 89d0f0b9eadd988b18581f0078681e12a5911539 * [ESGB-1202] HwConfig utility: Fix an ASSERT when HiiConverterProtocol->NodeToHii report error status SHA-1: bb4d4a8cf7fddb80822f74d45b307e86dff236ba * [ESGB-1199]Sync up Hiiprocessor SHA-1: 2413f0c9dc6f62ca66fc67194fd5d78448cc5d86 * [ESGB-781] ROME - Fix system hangs on Jalpa C4 with BIOS mode. SHA-1: 0ebdba189e40fc05c1f9efa6f6f08a2549464054 * [JIT-113367] Embedded Network disable function. SHA-1: d56fecb9ca2636091e10dedccd0c57be5b902de3 * [ESGB-1204] Expand the FVMAIN of Alar SHA-1: 94ca64665295444ef84d8cd89986ab34e6ef4f73 * ESGB-886 support CPU PPIN display in setup menu part 1 SHA-1: 7473054b7346036a0da4ceb258954acbf2002de9 * [ESGB-785][JIT-123040] EFI_ERR occurred when BIOS flashed with BIOS Update File Explorer integrated in System Utility. The error is occurred as expected because the linked shell library will locate shell related protocols in its constructor but there is no shell environment available yet. SHA-1: a402db9722074c42e208f50aa85128543a1fd1dc * [ESGB-994] Updated WriteSPDBlock with SPD write via IDRAC SMM IPMI interface and also moved this library from DellElogIpmiLibSmm to AmdRomePkg chipset code per code review feedback. SHA-1: c367c3d54128be2769d0b24fb4b113fe0ef8c71d * JIT-118194 display number of active core for ROME based on CCD and CCX SHA-1: 8df1b1b3fe7f6f402074f3531b56253a79172b20 * JIT-118200 bugfix for Processor Cache Size display incorrect under OS SHA-1: 5082feb4db2dd9f4f62531176745e3fa09c4cf58 * [ESGB-994] Updated Error logging policy code to log both correctable and uncorrectable error(s). SHA-1: 17f7937efe38b4772b618557754fddaefbc26927 * JIT-118432 - Junk screen is seen in boot capture file when Embedded Video is disabled : Initial Check In. SHA-1: 89c706afc0e90f3a43a865d3d1e16147dcb5a946 * [ESGB-994] Rome DIMM SPD Logging porting SHA-1: b83567cb0fafeb6e15e9dff5adc752067973d864 * [ESGB-1204] Update dat files *SHA-1: a5019f0a33091d57f9cc2b740a4c821e69f011d8 Disabled CRC check for all riser and floating device Cordoba payloads SHA-1: ee66e8d4c101b8ef8b748389f327a86f525d5cca * [ESGB-1204] Add a comment out SWV flag on Alar for testing phase SHA-1: 37d4c5c2b826af44b3d2d3dd882cb32a7699f9c8 * [ESGB-1150] Sync DellCorePkgs for MonteCarlo changes SHA-1: 179f8145062c0a0756ebe2a42c74ae0c95298bd2 * [ESGB-1210] Story 20: When the browser saves settings, save settings changed by the user. - Add new function in ConfigRouting Protocol to generate simplified ConfigResp SHA-1: 8f2d7dab1a6a0555f1501b17476564818d365e65 * [JIT-122130]128 is the max bits in an IP address, while 40 is the max characters. Change the Max character supported in IP field to 40 to be realistic. SHA-1: 0c9e8e08e451b9104e5a55148a885d5a69ec1115 * [ESGB-674] ACPI - Advanced Configuration and Power Interface SHA-1: a7a67109086b09b0f664ab1bfbbd04f2145f6145 * ESGB-1335 Add two new 15G OEMID features: * Replacing certain SMBIOS strings. * Requiring the setup password before trying F12 PXE boot. * FakeMaserData.h (if left as is) requires that DELL_GENERATION be set to 15 in DpiPlatformIdDxe.h * Fixed a long-standing failure in the NVRAM attribute protocol's GetNextAttributeName() function. It never returned the GUID corresponding to the name, but now it does. SHA-1: b7febcf845eb97818b20b911d59d7306b97bf5c6 * [ESGB-1198] Add HII Setup Modularity package. SHA-1: 88962237660e6e8bbda3bfbe9432b622c13568f5 * [ESGB-648] Split ROM. SHA-1: 1b6e86fe247110ef4ffc6c276659f2e095f514fd * [ESGB-1299] Static Riser Descriptions Symptom: [CORDOBA] Raiser do not initial properly SHA-1: 8f88505c3bf26d19749f7ea3f7b736e808456988 * [ESGB-1208] EFI_BROWSER_ACTION_SUBMITTED Support - Add test case in HiiExerciser - Removed repeat freepool in SubmitForForm() Check-in this again because someone revert it accidentally SHA-1: 54ea5867688614caa4204a2d89cbd454a86c7ecf * [ESGB-1207] HII POPUP Protocol Support - Change protocol header reference from dell to EDK2 - Add test case in HiiExerciser2 Unit28 SHA-1: 2b848f665f99711f01ab44d0ed902f7f9a52dd94 * [ESGB-1102] AGESA 0080 RC5 SHA-1: 026b6a9175d1104d1a9aff4268887d910a68db62 * [ESGB-1358] Change x2apic to default enabled SHA-1: a58c2a526b332a95c54c5323df25b3d58f96cbc9 * [ESGB-994] Rome DIMM SPD Logging porting[ESGB-994] Rome DIMM SPD Logging porting SHA-1: b52927bd654cfaa687b4531d7953ee8bca6cd383 Removed PerformancePkg and change PERFORMANCE_ENABLED build switch to FALSE because Performance Logs do not work. The new code uses a new ACPI table entry to locate the Performance Log and that code is still missing from the EDK2/MdeModulePkg files related to the Performace Logs feature. SHA-1: 46b77a7bae8c77c323841a46f8d8ed2d6a6267a7 * [ESGB-1204] add 15G dat header SHA-1: 67d1acdd7329416ffdd3bcee7588be6815a8ce57 * [ESGB-1204] Update 15G SWV tools SHA-1: 824c66b78215f476e17ab67c2946a756f0420e93 * [ESGB-1204] Add 15G SWV tool parts SHA-1: 26621cb42bf9e914ec1d7e79b8c7a4cbb0c58601 * [ESGB-1208] EFI_BROWSER_ACTION_SUBMITTED Support - Add test case in HiiExerciser - Removed repeat freepool in SubmitForForm() SHA-1: 3a450f45523f7fec996d2e3ca65815ae5b385a0e * [ESGB-1207] HII POPUP Protocol Support - Change protocol header reference - Add test case in HiiExerciser2 Unit28 SHA-1: 2814249d607955b7357de1478521bd777567bcff * [ESGB-1090][ROME] Add debug menu to control xGMI 3-link speed **************************************************************************** - Version: 0.3.1 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 03/05/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.0 RC4 for Family 17h * PSP Firmware Version: 00.0C.00.54 * SMU Firmware Version: 36.54.0 * DXIO Firmware Version : 36.569 * ABL Firmware Version: RABLSSP00802011 * uCode: 0830000B * S150 Firmware Version: 6.0.0-0002 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable “Virtualization Technology?to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-118024: [Alar/Jalpa] (BIOSUT) BIOS setup pop up a Saving Changes error massage when save changes. Workaround: Clear NVRAM by NVRAM_CLR jumper. 2. JIT-123710: [Alar] BIOS hang at POST "Initializing PCIe , USB and Video....." when the NVMe devices install in HDD tray slot-0 and slot-1 Workaround: If the system is installed with more than two NVMe devices, please do not install NVMe devices in HDD tray slot0 for Alar-C3 configuration ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 0.0.8.0 RC4. 2. Initial Jalpa C4 configuration support. 3. Update Memory DPI table for PT planar silkscreen. 4. Add MXIC MX25L25673G (JEDEC ID = 0xC22019, 32MB, 3.3V) flash part support. 5. Fix JIT-119906 Alar: System does not boot up after changing to Bios Mode. 6. Fix JIT-118182 [Alar/Jalpa] (CSM)System cannot find SATA ODD in Boot Sequence when boot mode is BIOS mode. 7. Fix JIT-119543 [Jalpa] (Cordoba) Device information of Slot ID and Bay ID are incorrect for NVMe device in Jalpa_C4 2U 24x2.5"NVME(8Universal+16NVME). 8. Fix JIT-122420 OM9.3.1 :OMSS (UT Defect) : (ALAR) (S150) NVME drive slot is not displayed in Slot 1 even with latest bios 0.2.4. 9. Fix JIT-122529 Alar C3 HII shows NVMe PCIeSSD in Slot 1 Bay 1 as P2P Bridge 0. 10. Fix JIT-122507 Alar C3 SMBIOS Bay/Slot Information of Bay 1 Slot 1 is listed as Bay 0 Slot 0. 11. Fix JIT-122707 15G ALAR : Storage PT - RHEL8 OS installation fails on Alar platform. 12. Update Code Base to version SHA-1: 2c85782f10129fa2007e5cad0b28d3a8f518b8ec ------------------------ SHA-1: 2c85782f10129fa2007e5cad0b28d3a8f518b8ec * [ESGB-992] Alar/Jalpa. Change the version number to 91.3.1 SHA-1: 55374c2eb1fe8c4032cc8ab7c04988c523189494 * [ESGB-992] Alar/Jalpa. Update Memory DPI table for PT planar silkscreen SHA-1: 568f93789cce2d79dee17f8aa3747becd5c3ab8a * [ESGB-1351] [Gemini] EDK2 sync to 12/28/18 -Sync comments and copyrights, no functional changes. SHA-1: a186c5c191d96324bd13e6365fd90855027c17e2 * [ESGB-1351] [Gemini] EDK2 sync to 12/28/18 -Sync comments and copyrights, no functional changes. SHA-1: 52bc261648eb529ee39c3c80efd3e71bd0979032 * [ESGB-1351][Gemini] EDK2 PCI bus driver sync to 12/28/18 SHA-1: 7438ea3875009a4dc73ecdf1d1c1d1e4aa8af124 * [ESGB-994] Rome DIMM SPD Logging porting SHA-1: 00d58fd6c2b903e4a78db39d53d8689a8aeaa967 * [ESGB-1102] AGESA 0080 RC4 Integration PART2 - Turn off Post Package Repair fro causing system resets on memory training failure SHA-1: 9bf457505f54f1281234523a957564d689a05b9d * [ESGB-994] Reverted changes from 46fdd879b82 temporary, so all IDRAC IPMI SPD related changes can be moved to ROME chipset code later. This reverts commit 1aa3a91a3fc0da1726e619e3ea7bf85415e31b73. SHA-1: b43491b87fffb997a5c670a4ce960fe788572dc6 * [ESGB-1102] AGESA 0080 RC4 Integration SHA-1: d7360e7d6c290a9c68b34e31b88c6e3e86bbecd7 * [ESGB-1351] [Gemini] EDK2 sync to 12/28/18 -SmmMemLib and DxeS3BootScriptLib to use EDK2 instead of Intel override. SHA-1: 364d18eb9c089329f1693b3fa7ead163c13c80af * X02 (6.0.0-0002) version of SWRAID drivers SHA-1: 1a3aa712044cada5073b871926a7879e7e76701e * [ESGB-886] Rome RAS: Memory error injection bug fix Clearing MCA Status on memory corrected errors SHA-1: ac59e76c3acc60efe218fc93d1bddeb9f72e67e0 * JIT-121869 Workaround W2019 install/load RSOD by reducing memmap. SHA-1: 00323c1f770f852f17f91028680908d28d8032fe * [ESGB-1360] Update from EDK2 SecurityPkg - comment changes and removing IPF (Itanium) support. No functional changes in this commit. SHA-1: 1aa3a91a3fc0da1726e619e3ea7bf85415e31b73 * Updated correctable and uncorrectable memory error logging with SPD write via IDRAC IPMI interface for AMD platforms. SHA-1: 9dd106cbed5ca789f7dd797e250b5a63dddc51b7 * [ESGB-1360] Update from EDK2 SecurityPkg (EDK2 commit f199664ce70b6b1303329113bf9fbc9b002fa1b6) - remove workaround for Itanium PE/COFF headers. SHA-1: c9b7f1e0ac9b9f9b98663165954d82da4ee7ddfb * [JIT-122420] RE-add WA removed by previous check-in SHA-1: 46fdd879b827f2fce3215b7c80bb9f1dfba68584 * [ESGB-994] Updated all duplicated definitions of DIMM mapping, slot information and protocol declarations defined in a certain libraries causing the build error when these libraries are built together in a single module. Added DellElogIpmiLibSmm library to the platform builds to allow code modules to consume the data. SHA-1: 958e539c97e740cf1183615425510c779c191923 * [ESGB-1360] Update from EDK2 SecurityPkg (EDK2 commit 0130fddeb32f2a91f8d3d81cd943f561a5719e50) - remove support for monotonic counter in authenticated variables. UEFI spec requires use of timestamp instead of counter. SHA-1: cd07446b4e4263d300cb5bfaff83dcc09b608c51 * [JIT-122485] [LS 2S] System hang at POST Loading BIOS Drivers........when run reboot cycle.…V SHA-1: 1513491607ef7042a3536ee65af0e5d53d63a68c * [ESGB-872] ROME CSM - Fix "Console Redirection" cannot output to SOL window with ipmitool after booting(INT19). SHA-1: 030bc2e7ce5ce1f6022705e2934c9fc8fd6e79cb * [JIT-123018] On-board BIOS recovery via spiVU is not working. When following the steps listed in SHA-1: 666d2291211f1447c381f2120804f2cdc9079a70 * "[ESGB-994] This reverts commit 1b71ee6bbad30bd934f0b40cbcd0c071a8a27382. [ESGB-994] Removed DellElogIpmiLibSmm library from the build temporary. SHA-1: 6c25dc07631b8c81cdd28cae7668534cf9b3c991 * [ESGB-1360] Updates from EDK2 SecurityPkg (no functional changes in this commit; just changes to drivers unused by Dell codebase. Merging these changes so that there are fewer diffs to examine in future EDK2 merges.) SHA-1: 8056073b367276e68306c81aae5720dab5b4db2e * [ESGB-994] Added DellElogIpmiLibSmm generic library to 14G Intel platform build. SHA-1: 8a5603add35e0521d118797ce1c9b241945ed078 * [JIT-122420] Fixed a device function override issue for the Nbio1 NVMe root ports SHA-1: ae3024b0409ec1f3cdfa22630aea14788ac39dd8 * [ESGB-994] Disabled SPD_DEBUG capability as the default setting. SHA-1: b4aec8337ad564d987091b2d2babbe69b4fcfc8e * [JIT-112498] Pioneer-MLK] NVMe with extender card information in SMBIOS type 9 is incorrect SHA-1: 1b71ee6bbad30bd934f0b40cbcd0c071a8a27382 * [ESGB-994] Updated correctable and uncorrectable error logging memory behaviors with SPD write via IDRAC IPMI interface for AMD platforms. Enabled Dell Memory SPD Access SMM driver for a few missing platform from previous commit (SHA1 1085e7c0b10) to avoid build issue. SHA-1: 08d64ca29bb06ebd9d829da79164b681bfacc52f * [ESGB-804] PCI Bifurcation - Rome Development Add OCP per support for Roadster per 15G_OCP_SIG_v0.82 SHA-1: 945dff14286185085247ed21edc17ac015dcfad1 * [ESGB-648] Using EFI_D_INFO debug level for minor information. SHA-1: 8887e18d806d650c11225567f379d114f502f48c * ESGB-886 add code for NBIF RAS support in SMM mode SHA-1: a38c4ac86ac7101ed440f8d800f39f83361af4b0 * [ESGB-1136] Changes to enable NVMe on Jalpa C4 config. SHA-1: 08fa919d307e456e27802df97067f58d9b0364c4 * [ESGB-1127] Cordoba: Implement Cordoba payload retrieval library functions - Proper backplane ID extraction for Sesto/Reventon SHA-1: f0cfe6af40fd7adf6e395b6cd2eee2189d855c52 * Agesa 0080 RC2 integration Part 3 - Turn on memory post package repair SHA-1: 1294f864dcec39bf642c9ab76e817e14c927ab24 * [ESGB-1001] AMD SPI Development. Add MXIC MX25L25673G (JEDEC ID = 0xC22019, 32MB, 3.3V) flash part support. SHA-1: a0992c06d231577abcb132f4cc5da91eb86d5252 * [ESGB-1268] MADT core enumeration processor BIOS setting 1. Implement BIOS option "MADT Core Enumeration" to allow user choose "Round-Robin" or "Linear" for OS CPU enumeration 2. Modify Rome AGESA to fix ESXi P-State issue SHA-1: 1085e7c0b10e01f37c2b33de01ccd4242b274aab * [ESGB-994] Enabled Dell Memory SPD Access SMM driver for 15G AMD platforms. Added RAS_SUPPORT switch for Roadster platform to avoid build error issue. SHA-1: 08fa919d307e456e27802df97067f58d9b0364c4 * [ESGB-1127] Cordoba: Implement Cordoba payload retrieval library functions - Proper backplane ID extraction for Sesto/Reventon SHA-1: f0cfe6af40fd7adf6e395b6cd2eee2189d855c52 * Agesa 0080 RC2 integration Part 3 - Turn on memory post package repair SHA-1: 97ff9ddab671eea3f49fe284661dfaff65673005 * [JIT-119906] 15G: Alar: System does not boot up after changing to Bios Mode - Fix CSM issue with single unit failed on Alar - Remove IRQ9 from PIRQ routing table because non-PCI devices may use the IRQ. SHA-1: 1294f864dcec39bf642c9ab76e817e14c927ab24 * [ESGB-1001] AMD SPI Development. Add MXIC MX25L25673G (JEDEC ID = 0xC22019, 32MB, 3.3V) flash part support. SHA-1: a0992c06d231577abcb132f4cc5da91eb86d5252 * [ESGB-1268] MADT core enumeration processor BIOS setting 1. Implement BIOS option "MADT Core Enumeration" to allow user choose "Round-Robin" or "Linear" for OS CPU enumeration 2. Modify Rome AGESA to fix ESXi P-State issue SHA-1: 2707e9c003e1c6a68e7f27d2c1faeab546a0279c * [ESGB-994] Revert changes from f91bd73e5d4 to fix Roaster build issue. SHA-1: f91bd73e5d4fdb20c2be819e171d529f6a69d59b * [ESGB-994] Updated Alar build process to build DellMemSPDAccessSmm driver. SHA-1: 4ef4b25d6f03c49e66393bcac2cd84faa573349d * [ESGB-1134] Cordoba: Updated ChipsetDescription.c to correctly reflect the possible configuration for each RootPort SHA-1: 9bd4e48b43f4852d3061bedc27857a46c0291177 * [ESGB-994] Need to set the flag to indicate when the SPD data has been sent to IDRAC and fixed response transaction ID information in Set SPD command. Also updated response data information in GET SPD command. SHA-1: 945140363c2c592e544285b1aca76fd1d2336835 * [ESGB-994] Remove unsupported commands with MUX information since it was prototype for Naples platforms only. SHA-1: a9053764b692cb56022b40e1d50adb7714a6e2a2 * JIT-118182: [Alar/Jalpa] (CSM)(BIOSUT) System cannot find SATA ODD in Boot Sequence when boot mode is BIOS mode. - Remove the code which is originally designed for 14G NF. Alar/Jalpa don't need it. SHA-1: 2edf4b3aaf2f137e081279c7ccbc27d1cdb9df30 * [ESGB-886] Rome RAS: Memory error injection bug fix Normalization Agesa address translation mapping for ChannelId from PSP to system board SHA-1: 445328689e6a168c3ddd67f5d456b31290c47915 * [ESGB-1001] AMD SPI Development. - When the target flash part is not present, switching back to original one. - Don't care the returned status after switching to code ROM because it would be unavailable after handing off to iDRAC. SHA-1: 00e15603c1006d384557682b8b9d666b1998e1ff * [ESGB-1090] Alar Memory DPI table update to be ordered by Silkscreen - Turn off ABL output for Alar - debug serial output fix in DellCpuDataDxeLib.c GetCpuLinkFrequency() SHA-1: 2b51863ca4e6c3f93eb732b1cb00063a8e3a510f * [JIT-122381]iSCSI target long string issue: Refine code. SHA-1: 1e75973418f95c9d5fdfe8897f4519dbeea1d0bf * [ESGB-1351] Sync the below packages up to 2bb4a7ca6299298f84da4657576b140f178c7458 on EDK2 release SHA-1: e6fd385d951087e9e388672b8af72c55e79d1f5e * [ESGB-994] Need to terminate asynchronous transaction for IDRAC non-zero completion code and no further retries required due timing concern in OS run-time. Always use ASYNC transaction type for the SET command. SHA-1: 70d99f296562ce6d11797bbaf9c16039c794ea4b * [ESGB-1351] [Gemini] EDK2 sync to 12/28/18 SHA-1: 72d5d561d1c4603f762b45d15d685fac209d601c * [ESGB-1351] Sync the below packages up to 2bb4a7ca6299298f84da4657576b140f178c7458 on EDK2 release SHA-1: 1e75973418f95c9d5fdfe8897f4519dbeea1d0bf * [ESGB-1351] Sync the below packages up to 2bb4a7ca6299298f84da4657576b140f178c7458 on EDK2 release SHA-1: 00e15603c1006d384557682b8b9d666b1998e1ff * [ESGB-1090] Alar Memory DPI table update to be ordered by Silkscreen - Turn off ABL output for Alar - debug serial output fix in DellCpuDataDxeLib.c GetCpuLinkFrequency() SHA-1: 2b51863ca4e6c3f93eb732b1cb00063a8e3a510f * [JIT-122381]iSCSI target long string issue: Refine code. SHA-1: e91b3a5a0be16a4d809c4f7b18825eb3a16fff52 * [JIT-112498] [Pioneer-MLK] NVMe with extender card information in SMBIOS type 9 is incorrect [JIT-120409] [Pioneer_MLK] NVMe ID Number incorrect under the some BCM NDC card SHA-1: 992521d4881417d8433eb02bc137574a4de76653 * [ESGB-1136] Rome Chipset Initialization: Adding missing file from previous check in. Fix build issue for Sesto with Cordoba Enabled. **************************************************************************** - Version: 0.3.0 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 02/22/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 0.0.8.0 RC2 for Family 17h * PSP Firmware Version: 00.0C.00.52 * SMU Firmware Version: 36.51.0 * DXIO Firmware Version : 36.569 * ABL Firmware Version: RABLSSP00802010 * uCode: 0830000B * S150 Firmware Version: 6.0.0-0001 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable “Virtualization Technology?to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 revision by EFI or DUP utilities. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-118024: [Alar/Jalpa] (BIOSUT) BIOS setup pop up a Saving Changes error massage when save changes. Workaround: Clear NVRAM by NVRAM_CLR jumper. 2. JIT-119543: [Jalpa] (Cordoba) Device information of Slot ID and Bay ID are incorrect for NVMe device in Jalpa_C4 2U 24x2.5"NVME(8Universal+16NVME) ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 0.0.8.0 RC2. 2. Fix JIT-121264: ALAR: IDRAC Interface is not showing S150 controller: BIOS DLP API DevicePathToLocationText failing with error code E 3. Update DpiMemoryDxe table older for SEL bitmap info at Alar/Jalpa UT board. 4. Update Code Base to version SHA-1: 1109852e81572226f5939c33d4472fafc98e2086 ------------------------ SHA-1: 1109852e81572226f5939c33d4472fafc98e2086 [ESGB-992] Alar/Jalpa. Change the version number to 91.3.0 SHA-1: 7ee0577fb1164667f607b27209d3c5e19c46b286 [ESGB-992] Alar/Jalpa. Set serial out default off. We can use DIP 6 to control print message via iDrac, so update these settings 1. DEFAULT_DEBUG_PRINT = 0x00000000. 2. PcdAmdIdsDebugPrintSerialPortEnable = FALSE SHA-1: 764e09231e4975513fed1224efb2ffc6d46f8cb8 [ESGB-1150] Move DellPlatformUsbOcMapLib.h from DellGenericPkg to DellPurleyPkg since it includes definition from Purley RC, and remove DellPlatformUsbOcMapLib for platforms that do not use it. SHA-1: b6a04a69a898f71c5f754b41111bafe9c5b7a8de [ESGB-1351] EDK2 sync to commit 2bb4a7ca6299298f84da4657576b140f178c7458. Upgrade DELL XhciDxe and UsbBusDxe driver. SHA-1: 7854cb727642c5568d090fd4d9c986e3b66140b0 [ESGB-886] Rome RAS unit testing: serial debug output fixes SHA-1: 2ce6fc08cd51dd44b0d926671ba79c9bd00d9336 [JIT-122381] Add size check and use safe string when retrieving iSCSI attributes to avoid RSOD. SHA-1: 0667a23d77fccd8722cfcee6ca4bdb9fbfed8dbb [ESGB-1136] Rome Chipset Initializtion: Fixed issue with PciRoot showing wrong value for second socket ports SHA-1: 4aead40bf1b5b5fb8a5dc0f0f44bf62b6a7fba11 [ESGB-1136] Rome Chipset Initialization: Changes to make Sesto to use the DpiPci2 table generated by PciChipsetInitPeim.c SHA-1: 279618d0b27645fc1845e6d21e55e9d095aa468d [ESGB-1351] [Gemini] EDK2 sync to 12/28/18 Updated following folders: MdePkg, MdeModulePkg, IntelFrameworkPkg, IntelFrameworkModulePkg, SHA-1: 8eb690fb58ac2007adac815eb7c51a692566ad27 [ESGB-994] Added additional check for the response status prior attempting another async transaction and also fixed SPD data remaining size. SHA-1: 16b276e5c1594215c005f7044a3080bf6313fc80 [ESGB-994] Removed switching the page for SPD device for AMD ROME systems since IDRAC will handle this behaviors. SHA-1: 7854cb727642c5568d090fd4d9c986e3b66140b0 [ESGB-886] Rome RAS unit testing: serial debug output fixes SHA-1: 4f345634e0bb87a1cb7fccc7d2e8e5adb8d89329 [ESGB-1245] EDK2 Code Update. USB HOST Controller Driver update (to EDK2 commit 2bb4a7ca6299298f84da4657576b140f178c7458) (!!! NOT USED BY DELL !!!) - EDK2\MdeModulePkg\Bus\Pci\EhciDxe, \EhciPei, \UhciDxe, \UhciPei, \XhciDxe, \XhciPei SHA-1: 8c99207cfb91c31327530fcbe8076baadd839b4a [ESGB-1245] EDK2 Code Update. -EDK2\MdeModulePkg\Bus\Usb SHA-1: 2c97b9ea0620d1339f1c7d8f47ee574d9a379007 [ESGB-1245] EDK2 Code Update. Update below drivers to EDK2 commit 2bb4a7ca6299298f84da4657576b140f178c7458. - EDK2\MdeModulePkg\Universal\Variable, \FaultTolerantWriteDxe, \FaultTolerantWritePei - EDK2\MdeModulePkg\Library\VarCheckPcdLib SHA-1: e9b71edffacec1cc0b02cb5679634c266657dc60 [ESGB-994] Added code to get DIMM slot based on DIMM node, DIMM channel and DIMM number. SHA-1: 9ffe843aa1837e88c647a5f183244a8d7a192760 [ESGB-1245] EDK2 Code Update. - Update BaseLib to EDK2 commit 2bb4a7ca6299298f84da4657576b140f178c7458. SHA-1: 4dce2aa738b6cc56c7c424f0aa7c972722588c57 [ESGB-994] Added missing definitions needed for DIMM_SPD_INFO. SHA-1: 6483f3d63b285aedf45bd176a35f153435b5f13b ESGB-886 support PSP correctable error injection SHA-1: 909f0676adbf5e2ae6d2dc6397e87dcef33f24f6 [ESGB-1102] Agesa 0080 RC2 SHA-1: 57091cd8cc4d74a049330ace0bb3bcc8607d4574, e30cb93c32574cd685f28417272b1ac02388f138, 231ab701e4769b9cb3b062a449ea359cf99549a0, 73fa1a489995c98f482b1d464c2f306ea61bfc5d [JIT-121264] ALAR: IDRAC Interface is not showing S150 controller: BIOS DLP API DevicePathToLocationText failing with error code E SHA-1: fdbbc40eb32852d688fe1c3ba5cae2e5e42a1100 [ESGB-994] Added behaviors support to handle both asynchronous or synchronous transaction when sending SPD data to IDRAC. Also, added Transaction ID response to monitor the future status during async behavior(s). SHA-1: 8cb4dffeaf3f78df7d344fc4666555ee5f348240 [ESGB-994] Need to send packet length instead of total length and also verify the valid data during the SET 0xB9 command. SHA-1: 2b2a4043f92ad7804702ae9bbccea6ef6db7f82c [JIT-120865][LS] System with full DIMM cannot boot to windows after load default in setup (alt+f). correct the setup item default value SHA-1: 972f9c7b70e3736217b87de4d213554243470e5c [ESGB-1001] Enable SPI lock based on password jumper. SHA-1: 2e929112cebe23d3cb8a63143c70a39028b2a93a [ESGB-992] Alar/Jalpa. Update DpiMemoryDxe table older for SEL bitmap info at Alar/Jalpa UT board. SHA-1: 0cc228d916d0a812332cf82694de411fb0237f25 [JIT-120755]BIOS Recovery does not work on Alar/Jalpa because of an issue in the Recovery BIOS code. Description: This code change is a enhancement for "SHA-1: 273ed9ce85cdf6a0c42b1367f203c97aae4efe06" and it will prevent uncompressed BIOS image be used for capsule file creation. SHA-1: 0dde6f12633d8dbfed14c0c7c7408e18ab904a03 ESGB-1313: [16G] send SCP by JSON format to iDRAC in base configuration **************************************************************************** - Version: 0.2.4 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 02/18/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 v0.0.7.1 RC2 for Family 17h * PSP Firmware Version: 00.0C.00.47 * SMU Firmware Version: 36.48.0 * DXIO Firmware Version: 36.562 * uCode: 0830000B ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable “Virtualization Technology?to do the test. 5. To update version 0.2.4 or newer version, the system must be updated to version 0.2.3 first if the current system BIOS is version 0.2.2 or older version. Otherwise SUT will not be able to update BIOS 0.2.4 version or newer version by EFI or DUP utilities. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-118024: [Alar/Jalpa] (BIOSUT) BIOS setup pop up a Saving Changes error massage when save changes. Workaround: Clear NVRAM by NVRAM_CLR jumper. 2. JIT-119543: [Jalpa] (Cordoba) Device information of Slot ID and Bay ID are incorrect for NVMe device in Jalpa_C4 2U 24x2.5"NVME(8Universal+16NVME) ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Enable RAS feature support. 2. Add Jalpa C3 configuration NVME support. [ESGB-1136] Changes to enable hotplug for NVMe root ports/DXIO on Jalpa C3 NVMe config. 3. Fix JIT-121264 ALAR: IDRAC Interface is not showing S150 controller: BIOS DLP API DevicePathToLocationText failing with error code E 4. Fix JIT-120755 BIOS Recovery does not work on Alar/Jalpa because of an issue in the Recovery BIOS code. 5. Update Code Base to version SHA-1: aa241cae26a344ce1c1539b90311fdcef4053647 ------------------------ SHA-1: aa241cae26a344ce1c1539b90311fdcef4053647 [ESGB-992] Alar/Jalpa. Change the version number to 91.2.4 SHA-1: 9bfa2901c9d6fb42c26f071392303d4bb700248d [ESGB-994] - Added SMM IPMI command 0xB8 (DIMM Get Info) and 0xB9 (DIMM Set Info) support based on preliminary spec (version 2). SHA-1: d8c5712fc50e290fe3a730ae62c938c767d48a3b [JIT-121264] ALAR: IDRAC Interface is not showing S150 controller: BIOS DLP API DevicePathToLocationText failing with error code E SHA-1: 7832986bbc9131c888f982601cf567d606946c94 [ESGB-828] Rome RAS unit testing: minor tweak and Dell override banners SHA-1: 159de6bc803c6961190fb910648c5b9c71822479 [ESGB-578] IPS team found a issue for BOSS card. BOSS card is define as AHCI controller. BIOS should not create placeholder for it. Issue: when HDD PlaceHolder enabled, Bootoption will create placeholder option for BOSS card.but can't change sequence. SHA-1: c55b6899723274f7c925164e6ba4930ba5d31230 ESGB-886 support NBIO uncorrect error ras SHA-1: 8340dc099a02f21c6bf010999078785c76bca7f5 [ESGB-828] Rome RAS NBIO unit testing bug fix SHA-1: ac98b23c91a71324a7f3b2b5a14e2b573dcffcb7 [ESGB-1136] Changes to enable hotplug for NVMe root ports/DXIO on Jalpa C3 NVMe config. It also includes Hotplug descriptor changes. SHA-1: 662743be45d2e2f8e84d138b30e65857a39d9f0c [ESGB-828] Rome RAS unit testing: NBIO/NBIF error logging enhancements Add FRU Text to CPER descriptor for various I/O errors. Designed to assist in identification of specific errors in dmesg log or Windows event viewer SHA-1: 975c689726a8d52034c682ae84d85fd4083be05f [JIT-120828] Cordoba: Jalpa device on Riser 1B shows incorrect slot number SHA-1: 708b49513232b1d9b3dc4436e11eb9d6c1eb7006 [JIT-120755]BIOS Recovery does not work on Alar/Jalpa because of an issue in the Recovery BIOS code. Description: This code change is a enhancement for "SHA-1: 273ed9ce85cdf6a0c42b1367f203c97aae4efe06" and it will prevent uncompressed BIOS image be used for capsule file creation. SHA-1: 6a5f58e924866c4080b0e90d19378b1f9e501aa2 [ESGB-992]Symptom : ODM build error caused by code change "SHA-1: 3dfd31033938470639b43e6f3b9cb28fef46517f" Root Cause: Some drivers will build failed because UefiHiiLib can NOT find signature of "gEdkiiIfrBitVarstoreGuid". Solution: 1. Move the overrided code in UefiHiiLib back to EDK source. 2. Remove overrided UefiHiiLib under Restricted Module package. 3. Correct include path for build process. **************************************************************************** - Version: 0.2.3 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 02/15/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 v0.0.7.1 RC2 for Family 17h * PSP Firmware Version: 00.0C.00.47 * SMU Firmware Version: 36.48.0 * DXIO Firmware Version: 36.562 * uCode: 0830000B ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable “Virtualization Technology?to do the test. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-118024: [Alar/Jalpa] (BIOSUT) BIOS setup pop up a Saving Changes error massage when save changes. Workaround: Clear NVRAM by NVRAM_CLR jumper. 2. JIT-119544: [Jalpa] (Cordoba) No Slot ID and Bay ID for NVMe devices in Jalpa_C3 2U 24x2.5"SAS/SATA(12SAS+12Universal) 3. JIT-119543: [Jalpa] (Cordoba) Device information of Slot ID and Bay ID are incorrect for NVMe device in Jalpa_C4 2U 24x2.5"NVME(8Universal+16NVME) ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Fix JIT-119343 [Alar/Jalpa][REL-UT]System stops on Windows Boot Manager after input power cycling or system restart test. 2. Fix JIT-120834 OM9.3.1 :OMSS (UT Defect) : (ALAR) NVME drive slot enumeration is wrong, due to which not able to perform any PD operation 3. Fix JIT-121713 15G Alar: Items missing from HW inventory after BIOS update from 0.2.1 to 0.2.2 4. Fix JIT-120828 [Jalpa] (Cordoba) The slot number of PCIe slots in Riser 1B, Embedded Slot4 and Slot5 are incorrect at 2U configuration 5. Fix JIT-120826 [Alar] (Cordoba) The slot number of PCIe slots in Riser 1A is incorrect at 1U configuration 6. Fix JIT-120235 [Alar/Jalpa] (Cordoba) Device information of mini-PERC device is incorrect in device settings page 7. Fix JIT-119604 [Alar/Jalpa] (Cordoba) Device information of OCP device is incorrect in device settings page 8. Fix JIT-119603 [Alar/Jalpa] (Cordoba) Device information of On-board LOM device is incorrect in device settings page 9. Fix JIT-117652 BIOS Modularity Core does not support devices with multiple connections 10. Integrate the 6.0.0-0001 S150 binaries for 15G platforms. 11. Update Code Base to version SHA-1: 9860a0e6a8a5b1c98a37cd008256d924a973cd54 12. Add Alar C3 configuration NVME support. ------------------------ SHA-1: 9860a0e6a8a5b1c98a37cd008256d924a973cd54 [ESGB-992] Alar/Jalpa. Change the version number to 91.2.3 SHA-1: 6524249ccdddc140760f9ddd6bd22df034b87733 [ESGB-992]Symptom : ODM build error caused by code change "SHA-1: 3dfd31033938470639b43e6f3b9cb28fef46517f" Root Cause: Some drivers will build failed because UefiHiiLib can NOT find signature of "gEdkiiIfrBitVarstoreGuid". Solution: 1. Move the overrided code in UefiHiiLib back to EDK source. 2. Remove overrided UefiHiiLib under Restricted Module package. 3. Correct include path for build proc... SHA-1: b70b3a6f1633b1dd1e0fd4f9b835fdfbfc835905 JIT-118432 - Allocate memory for non-null error messages only, some error messages don't contain DeviceName string SHA-1: 1e1edac56990487d845d4709f8a6b62459b61f1a [JIT-109965] Modify S150 support and DUP PIE create for release.bat. SHA-1: 78694f1c91c925845e7dd0b7b9deb1e5f2748256 [JIT-113367] Setup slot disablement function fail after enabling Cordoba. SHA-1: 2a0c55683f7a7e1e1e16ba27bce9a6789f12f484 [ESGB-994] Increased FV image size to accommodate DellMemSPDAccessSmm module. SHA-1: c9370c2bff57ca7ad7e24746398107b47200bddd [ESGB-828] Rome NBIO RAS error injection unit testing/bug fixes > Fix build error in prior check-in SHA-1: 333dbcb547db935970d259cfb2703736830251a7 [ESGB-994] Need to build CPU SPD access for ROME platforms with function/libraries via AgesPkg instead of PurleyXXPkg. SHA-1: 1e3c315fe73020fdaf115a22599bb810750627ef [ESGB-994] Commented out Read/Write SMBUS and previous boot status functions that are not applicable for ROME platforms. SHA-1: 5beb8ad5e87698eb55e8d19d81f149bbc44522b8 [ESGB-115] 14G MLK: Change ISS setup name to SST-Performance Profile SHA-1: 76f648d97b90ce1a83629f4bf558458bc9c5fba1 [ESGB-828] Rome NBIO RAS error injection unit testing/bug fixes SHA-1: 836e594172315bc2028213127d7032adad9178cd [ESISE-519] - R640/R740xd/R7415 BIOS modifications ESI customer request that is only enabled via a PM attribute - Allow PM to set the boot power state to efficient/performance. SHA-1: c807b7fc3dba3f2bd5e07247aadfd02a04d3a33b [ESGB-1089]Let enviroment variable SKIP_RESTRICTED_BIN_UPD skip updating the Boot guard related restricted binaries too SHA-1: 273ed9ce85cdf6a0c42b1367f203c97aae4efe06 [JIT-120755]BIOS Recovery does not work on Alar/Jalpa because of an issue in the Recovery BIOS code. Symptom: Process will show "!ERROR: New Image is not a valid BIOS image" after doing image check via CheckImage() under shell environment if the *.efi built from Makea_Release.bat or Makea_Arev_Release.bat. Root Cause: CheckImage() will always return "IMAGE_UPDATABLE_INVALID" because process wil... SHA-1: 9c86fd25c68de8d24a72b264e380ae25aa003673 [JIT-120668] Fix the "JIT-120668:[LS] NVMe name will display "P2P bridge" under Device Settings." SHA-1: 6460623c9abdc5365bb90607271867319bf2c452 [ESGB-1001] AMD SPI Development. - Add Identify function to know the current selected flash part. SHA-1: 5a1435ff4dab0efead11191d39a750719bfc3dec [ESGB-421] Create Memory Paging Policy setup option under Debug Menu. SHA-1: 1725488e0687a303be84475f1426e89ed96cbaed [ESGB-886] Rome RAS: Memory error injection bug fix Re-set starting value of error counter to 0xFFE can make SMI signal with second ECC injection Cloak defer error, fix bug OS will clear MCA error after receive SCI signaled due to defer error is uncloak SHA-1: a4369c35ed145ab44fdf8989fe8bf19c93d03cd1 [ESGB-1090] SESTO SHA-1: dcfa51afbe3d19275aa5932e8d7911581641bc42 [ESGB-994] Removed some duplicated and obsoleted code behaviors that are not applicable to AMD platforms including GetMcBankRegisterData, GetMcBankRegisterValue, GetDimmPresentStatus etc.. SHA-1: 6ba9a80e57e0de5593e74a1f626c59cbbad586f1 [ESGB-828] Rome RAS NBIO unit testing bug fixes SHA-1: 9f620d4ebbbf368af7cd755e45e6446012a2dfff [JIT-121334] SWRAID 6.0 - 15G: Disable unused SATA controllers on 15G platforms > Restore correct PcdSataEnable2 value based on Jalpa empirical testing SHA-1: 235d98413361d06d74a2b5afd81a94fbbd495ef7 [JIT-121334] SWRAID 6.0 - 15G: Disable unused SATA controllers on 15G platforms > Revert platform override temporarily SHA-1: dfbcf4ab11d363ba5c49e830309eac8b23c9aa1c [ESGB-886] Rome RAS: Memory Fatal error injection bug fix for previous boot error logging > McaErrorDetection was being run with PCI/IO previous boot error detection in RasMidBootInit > This is too late as MCA registers were already cleared at this point in POST > Moved McaErrorDetection call to AmdPlatformRasSspDxe entry point/constructor same as Naples SHA-1: bbb0875ddf7672bdabee8d1611ab702e28ac6c35 [ESGB-886] Rome RAS: NBIO unit testing bug fixes/enhancements SHA-1: a61660f4a85a248bddfdf9259a9256b2d5950c62 [ESGB-997]commit dsc & fdf for Mehlow refresh Beta4 SHA-1: 3c0b5c3ebf0f532f9860e7fac903bf0e94ac1a7c [ESGB-992] Alar/Jalpa. Set serial out default off. We can use DIP 6 to control print message via iDrac, so update these settings 1. DEFAULT_DEBUG_PRINT = 0x00000000 2. PcdAmdIdsDebugPrintSerialPortEnable = FALSE SHA-1: 0f0a8b0dde286cfd2d1d6bdf3de68817cb5cb8a7 JIT-116705 [ESGB-1320] Integrate the 6.0.0-0001 S150 binaries for 15G platforms SHA-1: 797a75146d09bf953886e1bec395c933256e92ac [ESGB-992] Alar/Jalpa. Support eSATA configuration for Hotplug. SHA-1: 3a26d826d9d9a44e80758db4d04c689c9a1d03a3 [ESGB-992] Alar/Jalpa. Correct the DpiSata map. Alar/Jalpa use SATA controller 3 & 4. Its path is PciRoot(0x2)/Pci(0x8,0x2) and PciRoot(0x2)/Pci(0x8,0x3). Notes: For SATA controller 1 & 2, its path is PciRoot(0x1)/Pci(0x8,0x2) and PciRoot(0x1)/Pci(0x8,0x3). Alar/Jalpa does not use it. SHA-1: 7a0b6aa73f24f2ee34355d6e0dbde1907a120ca8 [JIT-121334] SWRAID 6.0 - 15G: Disable unused SATA controllers on 15G platforms > Update controller enable bitmap to use Controllers 2 & 3 on Alar/Jalpa SHA-1: c61c54e2d2f5d839cc70e2770d2b5056f09b84fc [ESGB-648] 15G Dual ROM. - Add missing driver DellDualSpiRecoveryPei in FDF. - Add build flag DELL_SPLIT_ROM. (unexpectedly removed by commit d148081aacd) SHA-1: c1e97b69dd063fdb5c4cf58d4f6eca94d77245d5 [ESGB-1090] fix build error on SESTO caused in "SHA-1: 1bbf06bb9" SHA-1: 1606518ea22452ea46584ae2a4af3885920ad48d [ESGB-648] Add IIB test utility. (from dual ROM Dev. branch) SHA-1: e1c4dc81e09c62bff1ed7b6cf9f0cbb877bfd03d [ESGB-1044] Integrate the 5.4.0-0001 S140 binaries back for April FY20 release. SHA-1: 1bbf06bb9eca55e20be32b66523ca32aa5f65fc4 [ESGB-1042] [EDK2 merge] MdeModulePkg/Network: Add 32bit subnet mask support for IP4 PXE boot. SHA-1: 6a06f81ca8941a8e71989be1a1b4319097e185e1 [ESGB-994] Added SPD write routines to Rome modules. SHA-1: 11268542eef04863cb37a9da50299b8a9c8eec2d [JIT-121334] SWRAID 6.0 - 15G: Disable unused SATA controllers on 15G platforms SHA-1: e9d9f53ed761575fde6a2f25f10bfdd33d1bd6a3 [ESGB-886] Unit testing bug fixes for NBIO error injection SHA-1: ba29566be290b6445a84e743446803ac3cf30d76 [ESGB-1136] Rome Chipset Initialization: Fixed issue where second Embedded NIC in WAFL was not added to DpiPciTable SHA-1: 1f95c970dbad660e37a2378390f8f37e5f3a9db3 [ESGB-1057] Hotplug descriptor changes for Alar C3 Cpu direct config. SHA-1: accf7db819169f112a4e6bab10222707e9a32a81 [ESISE-519] - R640 BIOS modificationsESI customer request that is only enabled via a PM attribute - Added a 3rd option "Reset" to BootSeqRetry attribute to reset if all the boot options fail SHA-1: 91bb0361e6d7a4021b93443b01adfd43e7d70581 [ESGB-1127] Cordoba: Added missing parameter to debug print statement SHA-1: 68b896d041f2670d4f430b057906265c0a5157ed JIT-114543 add debug menu to control xGMI link speed SHA-1: cdccb2eda6785102e3e81ae1eec4687531a83527 ESGB-886 do not use PcieLegacyRas function SHA-1: c078ef7e035abba289618710ba8a112e0f79a0bc ESGB-886 AMD's patch for NbioRasControl.c, now the code will not go into dead loop. SHA-1: 67b7c461aebc0dca8375a214068a29ea7d7ce79b [ESGB-1017] Cordoba: Added coments to external device structures and enums SHA-1: b1bf0458aa9bc111c8472a840d25b6f23fbe60b7 [JIT-119604, JIT-119603] Fix DpiPci2 entry errors SHA-1: 5122c24810467c429c1e2f310d5d759582117c03 ESGB-886 add code to support CPU xGMI link speed control(part 1) SHA-1: d4d4a490e5b2984e9dc79498151614c154525404 JIT-114543 fix the bug that xGMI link speed is incorrect in BIOS setup menu SHA-1: 5b463fcba38e5472e98721a0327ae30a4dbef722 [JIT-119604, JIT-119603] Fix DpiPci2 entry errors SHA-1: ab2f21133361e70fbfc235ae8c7b18d521a63947 Merge branch 'master' of ssh://gtie-bitbucket.us.dell.com/esgbios/gemini SHA-1: 6e61e2506b0cf36b4053a89042dccb0c58864aa4 ESGB-1324: moved PBF from Power Management to Processor menu SHA-1: addfb0eb0fb92dec99e29407bf06355bec0ff9bc [ESGB-1136] Rome Chipset Initialization: Fixed several bugs in PciChipsetInitPeim.c Changed ConnectorType name in CHIPSET_INIT_PORT_OUTPUT and CHIPSET_INIT_INPUT to PcieLocationId to avoid confusion Fixed Issue with AMD_DXIO_PORT_DESCRIPTOR_SIZE Fixed ConnectorId assignation for NVMe Use Fixed DELL_CHIPSET_DESCRIPTION, was using PORT_ORDER instead of ROME_PORT_ORDER Fixed Width Issue that cause... SHA-1: 56be1daad636b17e38d334c4b2ca047416bbb2bd JIT-118432 - 14G Benelli RTS+ LC Log HECI error message contents contain Unicode character and error showing as information and not warning - Allocate memory because some messages may get deferred for later in POST. This will prevent message string from getting trashed. SHA-1: 9556ece2ed2f6fa2014e3de7bebc5689591144fe [ESGB-1136] Rome Chipset Initialization Override device, function, and device path only when it is a PCIe device. SHA-1: 2e491d1253a49c4e398f79ddf735c2f637e37d6b [ESGB-1136] Changes to enable hotplug for NVMe root ports and to populate the correct slimline connector information in Chipsetinit/DpiPci2. SHA-1: b1754f46c92aba7476969f2ad08292a8774faff1 [ESGB-1330] ADDDC Attribute - Reworded ADDDC help text for clarification(cherry picked from commit ba40c5bf1eafec2103727dd1fcdcc3983e65695e) SHA-1: 53d6e9ab67e7b86e73a0d44141b8737585447ce7 [ESGB-994] Updated DIMM mapping to match with platform schematic. SHA-1: 0e716079edca62591ac5019ef4e3aba25a9ce642 ESGB-1334 Fix memory leak. SHA-1: d2e6c8c09811bb0d90b6524dbfaf04776485055a [ESGB-828] Rome RAS porting: Enable fatal error to deferred error lookup for diagnostic mode SHA-1: 28566d018b56ab0c80fdd5b42f774cb360105d15 ESGB-1313: [16G] send SCP by JSON format to iDRAC in base configuration SHA-1: 295a5bfb0a42df8d5d6304cd14e19a56963cc3be ESGB-1324: fix for PBF HII item SHA-1: 42cf345ad2aa2592ca4d082000c913085f4e6e20 ESGB-1324: added Intel Priority Based Frequency HII menu item SHA-1: 0d54a6898f6af6a13825cfcc281141d6a0f31095 [ESGB-994] Updated SPD Log Event Block Region Registers set for AMD ROME (based on SPD X08 specification). SHA-1: b680b655a33d4e0d22864b54f7228eb146e461a8 JIT-116158 support both CCD down core and CCX down core. SHA-1: ec2b69670c73874d9561a83dc159d6ff8f866279 [JIT-119604, JIT-119603] Fix DpiPci2 entry errors SHA-1: d35e1dc4dfd28aed785a74a4cdf4c70db3de068e ESGB-886 merge agesa 0071rc2 RAS code SHA-1: 896dc0387054c26178fc4c9450ca58820292af67 [ESGB-648] 15G - Dual FLASH part Design. (DellAtlas15gPkg Dual Rom) - Merge DEV BRANCH to master. - Remove the information from "git status" temporarily to avoid oversize in IIB. SHA-1: f82602773dd7992703de4d8fad12f33c9f613958 [JIT-116703] Changes to provide a full device path through a variable by which S150 can uniquely identify the boot VD. SHA-1: dce8c58399ac05b13407c48a65108fa0d3281b33 [ESGB-648]15G - Dual FLASH part Design. (DellPlatform) - Add dummy IIB driver for IIB data extraction. - Additional region allocated for data ROM region layout information. - Set RECOVERY_ROM_UNSUPPORTED flag for Sesto platform because recovery ROM is not necessary. - Bring DELL_SPLIT_ROM C MACRO to compiler. - When SPLIT ROM is enabled, one flash block size will be 4K. SHA-1: 5411a88602140d7191bdbc44f5f6dda197a3219f [ESGB-648]15G - Dual FLASH part Design. (DellChipset) - INTEL: Using FlashRegionAll type to read flash data from flash linear address. - SPI Access in early PEI phase. Detect AMD SOC and set flash linear address offset. SHA-1: 4132ada6ed59484337545f4987713829cae720f4 [ESGB-648]15G - Dual FLASH part Design. (Dell Core) - DELL ACI SMM - Read ACI data from data ROM via SPI protocol. - Flash protect region driver specify the range based on flash linear address or physical memory address. - Personality module driver read OEMID from data ROM via SPI protocol. - Personality module PEI driver cache OEMID in a memory allocation HOB. - Personality module DXE driver c... SHA-1: 70951472b96a4951b758f683789b36221f760fc0 [ESGB-648] 15G - Dual FLASH part Design. (Build process) - Build tool update to generate FD region layout information of data ROM. - Add MePspMapParser utility to parse ROM file and create IIB. - If RECOVERY_ROM_UNSUPPORTED environment variable is set, skip those build flow related recovery ROM creation. SHA-1: ade68f70ee11b80309afd06629b31ef81228fb57 [ESGB-1150] Removed specific chipset dependency from DellTxt and DellCpuInfoSmm. SHA-1: d6076adc840c3125b9e78ee8056391b169d720f9 [ESGB-1330] ADDDC Attribute - Removed the "Enable" option if the ADDDC setup option is grayed out. SHA-1: 3924adeb2f97f5b50608c88acff7f2198ea710f7 ESGB-1313: [16G] send SCP by JSON format to iDRAC in base configuration -add collect attributes and build in JSON SHA-1: 3980ff9535cfcf432035537bfc0eff88a5cdedf0 [ESGB-1322] Modified implementation for not stopping on errors SHA-1: 0033309ddc41b14e222190c893cce269d2cdcdab [JIT-113338/JIT-118449] Add Internal USB Port and IDSDM items for AMD Sesto. SHA-1: 7da74569f620d8b93812e58bdf94b9e8f5a2cae0 [JIT-117405] [Skyline MLK BIOS UT] USB device class is not updated after hot-plug USB HUB USB device class is not updated after hot-plug USB HUB from floppy. Check return status to make sure GetUsbMediaDeviceClass has valid data. SHA-1: 8612645f1422a5420b35c6b7b14950b89dabfa1d [ESGB-1209] Update HiiBrowserCap test utility - To support Browser Capability Protocol changes in UEFI 2.7 SHA-1: 9d6af5737bb386a9155547bfba29b0d04685ede8 ESGB-1209 Browser Capability Protocol update for UEFI 2.7 **************************************************************************** - Version: 0.2.2 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 01/31/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 v0.0.7.1 RC2 for Family 17h * PSP Firmware Version: 00.0C.00.47 * SMU Firmware Version: 36.48.0 * DXIO Firmware Version: 36.562 * uCode: 0830000B ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. 4. BIOS 0.2.2 enable SRIOV, WDT and ACPI IVRS for IOMMU, it need to install the Windows 2016 patch to prevent the system hang on Windows logo. -For new install or boot Windows Server 2016, Please install the OS Build 14393.1378 or later version. -For older builds of Windows Server 2016, Please install the OS patch before you update the BIOS to 0.2.2. *Added patch from https://support.microsoft.com/en-us/help/4022723/windows-10-update-kb4022723 -If system upgrade to BIOS 0.2.2 already, please set the "Virtualization Technology" to disable in BIOS setup menu. Then you may be able boot into Windows 2016 to install the OS patch. After that, you can enable “Virtualization Technology?to do the test. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. JIT-118024: [Alar/Jalpa] (BIOSUT) BIOS setup pop up a Saving Changes error massage when save changes. Workaround: Clear NVRAM by NVRAM_CLR jumper. 2. JIT-119603: [Alar/Jalpa] (Cordoba) Device information of On-board LOM device is incorrect in device settings page 3. JIT-119604: [Alar/Jalpa] (Cordoba) Device information of OCP device is incorrect in device settings page 4. JIT-119544: [Jalpa] (Cordoba) No Slot ID and Bay ID for NVMe devices in Jalpa_C3 2U 24x2.5"SAS/SATA(12SAS+12Universal) 5. JIT-119543: [Jalpa] (Cordoba) Device information of Slot ID and Bay ID are incorrect for NVMe device in Jalpa_C4 2U 24x2.5"NVME(8Universal+16NVME) 6. JIT-120235: [Alar/Jalpa] (Cordoba) Device information of mini-PERC device is incorrect in device settings page 7. JIT-117652: (Cordoba) BIOS Modularity Core does not support devices with multiple connections ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 0.0.7.1 RC2. 2. Enable Cordoba. 3. Integrate the 6.0.0-0000 S150 binaries for 15G platforms. 4. Update OC pin porting for internal USB port. 5. Fix JIT-116519: [Alar/Jalpa] ARI capability is not setting in the PCIe root port. 6. Fix JIT-116269: [Alar/Jalpa] (CSM) (BIOSUT)The system will stop when try to boot form Legacy PXE (onboard Lan). 7. Fix JIT-116158: [Alar/Japla] Processor Settings Prefetch Setup Options Validation. 8. Fix JIT-115913: Alar/Jalpa]All USB ports may malfunction after hot plug USB device. 9. Fix JIT-120152: S140 Controller shown in 15G R7515 instead of S150. Fix JIT-119770(CR): SWRAID 6.0-15G:15G Alar system is showing as S140 instead of S150 while changing the settings of NVMe in BIOS settings. 10. Fix JIT-118182: [Alar/Jalpa] (CSM)(BIOSUT) System cannot find SATA ODD in Boot Sequence when boot mode is BIOS mode. 11. Fix JIT-117375: [Alar/Jalpa] CPU cores disable function in BIOS setup is fail. 12. Update Code Base to version SHA-1: 34d9dade3f70a59c912b2fff4356461e211e15c5 ------------------------ SHA-1: 34d9dade3f70a59c912b2fff4356461e211e15c5 [ESGB-992] Alar/Jalpa. Change the version number to 91.2.2 SHA-1: 95394d6f22e53fb663ed4bebebf387cbe3323a4f [ESGB-1001] When DEBUG_MENU_ENABLE is turned off, removing flash write OPCODE from FCH SPI register to avoid MMIO direct write. - For debug purpose, the flash MMIO write is allowable in order to catch any buggy code which is writing data to unexpected memory address. SHA-1: 66f5520a7363aa822403049762283536b3216a76 [ESGB-992] Alar/Jalpa. Use 15GWAVE1 for PIE creation. SHA-1: 39e9c595e40f6ec1fdced2bfa37bd52968dc2825 [ESGB-992] Alar/Jalpa. Clean up the unused codes. SHA-1: f4f9f114a444aeb3763deee7263f991c0483a5f5 JIT-119161 - 14G RTS+ : iDRAC-HII - SEL in the setup menu and LC log in the iDRAC GUI do not match SHA-1: f14e976f54de93a637e0592f23efdd8ac500f31b [ESGB-872] CSM - Correct PIRQ routing for bridge 16-21 on ROME. SHA-1: 70e6b5ba17424c7f67381890495029c711078c50 [JIT-115913] Fix all USB ports may malfunction after hot plug USB device for AMD Alar. SHA-1: 32a7b3c6948db8555d723123fc68fa7ca31f404a [ESGB-1205] Update copyright year to 2019 for HII browser SHA-1: c0301e511d7ce91f2318691899c4ed045626a6b0 ESGB-1206 Update IFR Parser to UDK2018 - Update UefiHiiLib to UDK2018 - Update HiiDatabaseDxe driver to UDK2018 - Disable PcdHiiOsRuntimeSupport, this is a new feature in HiiDatabaseDxe driver in order to support run time HII configuration access. Disable it since we don't need it. SHA-1: 95e11fb4040b9f8fd8dd33d964219374fe0c743d [ESGB-1090] AGESA 0071 RC2 * Update AGESA 0071 RC2 RAS code to fix compile error when RAS enabled * Set RAS_SUPPORT = TRUE for Alar (Notes: Alar/Jalpa BIOS 0.2.2 does not enable RAS) SHA-1: a646dfa08c5ec0eca003dd83e2f426932f682e17 [ESGB-1090][ROME/all] merge Agesa 0071 RC2 Agesa 0071 RC2 - Turn ABL output off for ALAR Agesa 0071 RC2 - Add PhyFw binaries in XML description files. Agesa 0071 RC2 - Add 0071 RC2 platform change for Sesto. SHA-1: ba4f2f88f3f4e40ccf821343e9cd4d47c0925cba JIT-118200 Processor Cache Size display incorrect under OS. bugfix SHA-1: 362e5187615f51b778a3396c84f3d8d4ac2f728c [ESGB-1001] - Enhance SPI read performance. - Use 24BIT Address Erase (sector/block) command for better compatibility. SHA-1: 1eaa91c02b33b40b22bffdd457fef2c28a625e12 [ESGB-994] Added SPD_DEBUG capability. SHA-1: 795017605dc35a072c3b4e96e641238f065faefe [ESGB-994] Enabled RAS support. (Notes: Alar/Jalpa BIOS 0.2.2 does not enable RAS) SHA-1: 0372562e2bb3d3dce3bfd98f78048fd5b8828c69 ESGB-886 fix assert issue when RAS enabled and debug level set to 0x80000043 SHA-1: 27463e6c6cda0c39c41853ee2acb535df9c6291e ESGB-1313: [16G] send SCP by JSON format to iDRAC in base configuration SHA-1: 6ebf81851cee6e8ed406ebe072bbd08a621bf101 [ESGB-1314] DXIO Phy Customization Interface. Support Alar/Jalpa DXIO Phy customization. SHA-1: 60831f70037e63304e06335c6aabf0372d0cc194 [ESGB-1323] Fix Dpi SATA Map for Alar to load SWRAID.Besides the DpiSata Map, there is missing information on DellChipsetInfoDxe.c where SwRaidCfg information is not updated with hte iformation of the SATA Controllers. Also, uncommenting RaidCore.inf in Platform Package DSC. SHA-1: a12b364a4060c7171f56b2cdac89896c09a8a899 ESGB-886 bugfix: when pcie error injection cause reboot error, the AmdPlatformRasSspDxe will go into a deadloop when make previous error boot log. This patch fix the issue. SHA-1: be42e0b1f918aa08532afe3bcddd42b4c6719f69 [ESGB-886] Rome PCIe RAS: Ensure AER uncorrected error status remains visible across reset boundary SHA-1: f6db3b6f2d6c9e430af833b706221220c82c8c1a [ESGB-1136] Rome Chipset Initialization. Create entries in the PciChipsetInitOutput as a Power of 2. SHA-1: 7b79ddaaf12c293c8a07756cae0ccd185dae302f [ESGB-1108] Add support for determining if system is in POST. During POST, if the temperature is measured to be 0x85, then we will mark it as invalid. Otherwise, we will mark it as overflow. SHA-1: a1e759112ec581e89478cbae784cd8769c948dac; fe6ae0e1d28530d1121317d3ea11d3b3eec1eaff ESGB-1317: Add several more possible text modes. Simplify the code in GetResolutionSupport(). SHA-1: 2f22174510aa39e0e7ea22120e029178ba1081c7 [ESGB-886] Rome PCIe RAS support: unit testing bug fixes SHA-1: c8ad2eef9d981fd55d165bd0adcead33b5e2f8ab [ESGB-886] Rome previous boot error logging: Quick hack for Sesto support SHA-1: 4a8dd9cc0c938ad39a8bf7236dbdae68cffb0a35 [ESGB-886] Rome PCIe RAS - Move SCI/NMI generation to end of post-processing routine / reorganize code to disable PCIe error SMI generation SHA-1: bfa30ce6011c1e0348f9243afba94197916bc5a8 [JIT-119770] SWRAID 6.0-15G:15G Alar system is showing as S140 instead of S150 while changing the settings of NVMe in BIOS settings. SHA-1: cf88da09530fa26128edf8269de60bdee3502cf1 ESGB-1206 Update IFR Parser to UDK2018 SHA-1: c40a73dc81c2d8bc8198b574709d2e57797a56fc; 9c9ff26236abcf8179b3831ac2c03da420bf67d5; dd8a1d7edf08962e1f472842764617390bbb1b21 [ESGB-886] PCIe RAS error handler SHA-1: cacc800ca7572f440a54a0412e3bb68c27b07ddf [ESGB-886] Temporarily comment out Dell UR validation for unit testing SHA-1: 64673c2f16c92a13423cc4ad3b92af671db36bf4 [ESGB-1320] Integrate the 6.0.0-0000 S150 binaries for 15G platforms SHA-1: e31b920c2687f5e4809f1be5114a2960f11ce62e [ESGB-886] PCIe RAS unit testing bug fixes SHA-1: eccf4b5af5455572cfd45d046965b325c79a6a4c [ESGB-994] Added PostProcessingRequiredCumulative flag debug check. SHA-1: 0edf1df64339ff251c36c0d6d81cef9f315bb3f8 [ESGB-886] PCIe AER enablement SHA-1: 0f4310a50573e6f73563fa18e11f7ec75532bf58; 95cb0910f00a03ab25b2afa4b95b32f0064dbbe1 ESGB-1317: Add several more possible text modes that depend on support for different screen resolutions. SHA-1: 86bf7a0fc8bcce9ffa1237cebac619999436c653 [ESGB-1078] Enable SRIOV, WDT and ACPI IVRS for IOMMU SHA-1: 5d4cfc25ecd94ac00b4aa1c9f3c0902ce26abd46 [ESGB-1136] PciChipsetInitPeim check NULL pointer access SHA-1: 65c9476ff2f860f34ebb91443e9e11df38c81529 (reverted, eaf7de0795de04ba9443f579048fd06c7bd27057) [ESGB-886] Rome RAS: Temporary check-in for PCIe error handler unit testing SHA-1: 4fe32c4343e2bfb321d71fdb30eda0501ebf8671; cc6c17c58070220f5e4e48ba00e3ee5af3dddf34 [ESGB-1316] AMD NUMA Nodes Per Socket Part 2 - AtlasPkg Build fix - Add Processor BIOS Setting for NUMA nodes per socket and CCX as NUMA Node SHA-1: b062fcaccd3f05920733f1853c44c2d973998bfb [ESGB-828] MCA CPER post-processing fixes SHA-1: df207d633fb3bbfe79c9e82d7474503c4521b9f8 [ESGB-1050] Increase the buffer to store previous boot error from 100 to 200 errors (sync with DellSmmElogLib) SHA-1: 82bd32aba596b3973903b6ab76270f78ee35ca5e; addf06cb0984950a7ec8908f54beb4d6abe4aabc [ESGB-782] Enhance CPLD utility and FMP for 15G CPLD feature support so this includes some code changes. 1. Support "XEPV"(XFlash, Erase, Program, Verify) action. 2. Support "XVO"(XFlash, Verify Only) 3. Move Dell12gCpldFirmwareManagementProtocolLib.h to DellGenericPkg/Include/Library/ for other drivers reference and also update relevant drivers includs the header file. 4. Clear redundant code and useless code. 5. One solution to fix a defect of incomplete debug message be spewed out. 6. Update relevant binaries for this modification. SHA-1: 4b40528f141764b58627e277343a15e583ca53f6 [ESGB-828] MCA CPER post-processing fixes SHA-1: 6fefaf7267bc9b0ed4c771e9f82f1b2e181a195c [ESGB-886] Enable PCIe PcdAmdNbioRASControlV2 to legacy f/w first mode SHA-1: 6fc853683a5060445b8b26c341a7831f5331e74f [ESGB-886] Fix Alar/Jalpa build error after code change by SHA-1: fa03b3da60fd229d0c8409cfdf9f097f3c791661 SHA-1: fa03b3da60fd229d0c8409cfdf9f097f3c791661 [ESGB-886] RAS code porting - PCIe AER enablement SHA-1: 4b8d9c5df27df396cabfb738d3341fb2ab454549 [ESGB-735] Alternate Routing ID (ARI)- AMD provided a Fix for ARI conflict with P/G-Links (Ticket ECET-6171), enabling ARI Support now and commenting PcieAriInit to port the fix for Nvidia T4 cards to Rome. SHA-1: 19923ebd72e33750421d1f2329e40680db4573a5 [ESGB-735] Alternate Routing ID (ARI). Comment out AGESA ARI initialization for ZP. SHA-1: f1f48960967ecddb4428362fd0ae2d2437759c11 ESGB-1317: Add a 126 by 40 text mode for use in the UEFI shell. SHA-1: 899850a6e6d702b4a26d6d9c7eaabc192c6cbc86 [ESGB-1050] Increase the buffer to store previous boot error from 100 to 200 errors SHA-1: 27028bd833a50e9dd4bb8d1ded0a3ce0cf863183 [ESGB-1316] AMD NUMA Nodes Per Socket Atlaspkg build fix SHA-1: 8481c2da9d69667e18c41b44b8eee27e70f44c85 JIT-119420 SLP cannot be enabled and locked SHA-1: 05d1844cedea05faf76ab74917c484e0a31738a0; 8b09558542d02e1073ba4844269026c39ab4ba8f [ESGB-886] RAS code porting - PCIe AER enablement SHA-1: 436403b3b2595d421ddbb6e61ce67f8ebd212979 [ESGB-1316] AMD NUMA Nodes Per Socket Part 1 - Remove Naples Memory Interleave functionality. Only provide Auto and Disable as options for Memory Interleaving to match Rome CRB BIOS setting SHA-1: 047e64210ce44e1db290c7a3015d764da3d8e758 [ESGB-804] PCI Bifurcation - Rome Development: Fix bugs and move some code per code review https://gtie-crucible.us.dell.com/cru/ESGBIOS-214#CFR-8633 SHA-1: c7404da430105728a8c3234dcf6e70f30f17d90e [ESGB-782] Update EfiFlashCpld utility to avoid using the wording "14G" directly during CPLD update because the common utility is compatible with 14G and 15G. 1. Move the wording "14G" or "15G" wording to help message. 2. Update the utility version to 1.2 SHA-1: 454e21b8f8aa9789d5347728cc0e0a0595db2ec7 [ESGB-1167]BMC_I2C_DIMM_MUX_EN_N bit field implementation for 14G Cpld Spec Register Definitions Solution: Move offset 0x76 bit 0 for I2C switch mux control to offset 0x16 bit 4 to follow the newest design. Currently BIOS will keep these two ways to reach that, but offset 0x76 will be removed at PT. CPLD I/O map 16.4 : BMC_I2C_DIMM_MUX_EN_N - BIOS writes to 0 when done w/ SPD bus during POST. Affects bmc mem 0x0F.2. CPLD sets to 1 on platform reset and hsot power off. SHA-1: a68e2ce58fd462ac75506cea5f9f8721e5aa80d4 [ESGB-1167]14G Cpld Spec Register Definitions Solution: Add "BMC_I2C_DIMM_MUX_EN_N" bit filed definition for new design of 14G CPLD definition. CPLD I/O map 16.4 : BMC_I2C_DIMM_MUX_EN_N - BIOS writes to 0 when done w/ SPD bus during POST. Affects bmc mem 0x0F.2. CPLD sets to 1 on platform reset and hsot power off. SHA-1: 62a11cbe14b7f52a00b36547eaf57cf29701f5b3 JIT-119420 SLP cannot be enabled and locked SHA-1: c46ea06ad8436b1ade05f80ea9807242c18b2be2 [ESGB-1292] Display AMD SMU version Display correct DXIO version per https://ontrack.amd.com/browse/ECET-6599 SHA-1: 1117ad89eb571704172d96d1a5fc32f39cb36a72; c06363ab59d26804a4d0af54c564c1479d8d0ac8; 27e65fac075efdb006d2ee0435442dd5b99bf5e3 [ESGB-886] RAS code porting - PCIe AER enablement SHA-1: 5152a1072b8a1df5b9150aa14c9cf437b9e57563 ESGB-886 only enable AMD supported downcore(16, 32, 48) option, will add more downcore option when AMD finish this feature. SHA-1: 9c0654ee86933c21c70a847aad40b2886b8ff347 ESGB-886 Support DownCore to 48 Cores SHA-1: d392f55c243771d8927c16329a90fd1e89532414 [ESGB-1001] Clear flash write OPCODEs in SPIx18 and SPIx50 registers as soon as possible to prevent flash part from unexpected memory direct write. SHA-1: 837b485f7438746acaabce2f0865b681854fd6a2 JIT-116158 bugfix for Processor Settings Prefetch Setup options Validation SHA-1: 3b7ef80f954261b43709b5e7119e26974bb8c056; a74c52837f478d5e21bba87ec3c0b40d91f57f3d [ESGB-886] add RAS postProcess function call code SHA-1: 44b247bbbe056c9be4dc27d09b0e118eb7d16979 [ESGB-856] Fix build error caused by unreferenced local variable warning. SHA-1: 731cf780c69c5e4ac56acdcae708bd1e4e546793 [ESGB-856] TPM support on 15G ROME. - Using vendor ID to lookup TPM2 manufacturer string. - Do not reserve those bytes returned from TPM2_GetCapability with TPM_PT_MANUFACTURER. SHA-1: 9ad57dab9e4f74d3917690ca008a3b99a34287fc [ESGB-1154] PCI - Reset: Update CPLD bits for 15G AMD systems per HW team's update. SHA-1: 7652999a333dc3d24ba1000aca4e60a251c935ea; 98bb636534bd153c873b256e6c2cbe678c37be17 [ESGB-1136] PciChipsetInitPeim fix memory corruption issue SHA-1: 8e6f3c880b82486883ae916b3a562d3408af23f0 [ESGB-804] PCI Bifurcation - Rome Development: Add OCP bifurcation support for embedded OCP. According to PSE team, this is common across all 15G platforms. There is no plan to support floating OCP at this moment. Wave 1 platforms will not support OCP on risers. SHA-1: e765db7f34307cb88200a284bd4a182aa481725f [JIT-117652] Cordoba: WA for detected memory corruption SHA-1: 231d581d1c079275f5ade90301174b3757d02c33 [ESGB-561] Add Dell SMM Elog SMA protocol to support SEL decoder. SHA-1: 0aa8711c37ad52cc84f2ea617cd1b5e8d343793a ESGB-543: PEI serial debug level detect driver modify. PCD must be highest priority. SHA-1: af05d8a430543c2a977f76536c9070fdf1ab9f49 [ESGB-1105] iDRAC-HII RTS+ X04 (SWB# 2H6H5 X04) into the latest 14G BIOS Releases. SHA-1: 93976e576cfb12fd5a3d70b50c4d309dbd668736; 58ebb1f70c6f81351c7a7872295d944f0d63ea5a; 44061c6f8730e5a1d82a13c7b29a5f8e82c5de93 [JIT-115620]14G RTS+: BIOS SCP, set boot mode from BIOS to UEFI, set multiple UEFI network attributes fails using SMA path note:BIOS behavior will changed. In the past, SCP only once, but now will execute 2 time if error found on first time. -update success attribute only before retry for match with SSM -add debug message for result file SHA-1: 22bae8f6458d375f75fdd8731b3b285064d3b0b6 [ESGB-1001] SPI Development. - Using OPCODE 0x4B (read manufacturer ID) to check if the current using flash part is SPI emulator with WINBOND. - If using emulator SPI with WINBOND flash part, don't send ENTER/EXIT ADS command. - Replace erase and write opcodes with 4 byte address commands. !!!!! When using SPI emulator: - W25Q256JW for SESTO/REVENTON platform. - W25Q256JV or W25R128FV on ALAR platform. SHA-1: 17ce54d368cc3e54d0054cd05c11f1dc904d7b4a [ESGB-1136] PciChipsetInitPeim changes to generate DpiPci Table. Cordoba Code now uses GetDpiPciTable instead of DellModularityCoreOverride to generate DpiPciTable SHA-1: 03db314751536f35c3b9c3f21029182a3a1047a7 [ESGB-992] Alar/Jalpa. OC pin porting for internal USB port. SHA-1: 8284b2060711164ec990fdffaa3869f478a26567 [ESGB-1090] Copy main BIOS to DRAM also to reduce the redundant SPI read (save ~4 seconds) when decompressing GUIDED sections for Alar/Jalpa. SHA-1: 9818d71b8f6b6b483931e7a441717e827371a87c [JIT-118594] CSM - Fix a messy code showed during POST when enabling SOL with external serial device. SHA-1: c9ce24fd53574220a5a00c30bff414b5fabe26e9 [ESGB-856] 15G TPM Enabling. Since TPMID GPIOs are not available anymore, temporarily using EDK2 defined PCD PcdTpmInstanceGuid to know if a TPM is installed. [ToDo] Code clean-up to remove those code that is using TPMID. 15G SPI TPM only support TPM2.0 so the new detection flow should use TPM vendor ID or manufacture string to identify the TPM is normal TPM2 or CTPM2.0. SHA-1: 92be0aab8aaed3c4dbc6fdb98b7a399de9f3bb64 [ESGB-664] PCI Resource Assignment: Add serial messages to print out MMIO Limit above 4GB to verify setup option. SHA-1: 09700bac1aacabc4acd8634f89d42808613c685a ESGB-886 fix build issue for Agesa RAS code, we will not use Agesa RAS code, this is only for compare during debug time SHA-1: c4ebb4d9c76215d034e356000a06a812e1a9f84e [JIT-117146] Correction in TPM 2.0 support. Avoid measuring Secure Boot variables twice (SecureBoot, PK, KEK, db, dbx) for 2.0 TPMs. SHA-1: 8476f4a9502201db94602424bc6c03b582b5c05c ESGB-1292 ONLY display SMU and DXIO information in AMD Platform SHA-1: fca7b6b60c4f8256f3ad4b670b2b295cc697eba2 ESGB-886 enable RAS support in build SHA-1: 404d96b6e986cfe007670b0df5bc798bb79afe01 [ESGB-804] PCI Bifurcation - Rome Development: Port AMD's fix for LOM connected to WAFL. SHA-1: 6b859859aca29020d55eb2dee4e18e3792e3bf05 JIT-118358 Downcore support in ROME CPU part 1. This is Dell part change for CPU down core, as the Amd has some issue in their side, current downcore does not work and cause system hang. SHA-1: 56662b4f2a64667d49ea9a3254dc25e141a30a27 [JIT-116821]BIOS don't switch I2C DIMM MUX after BIOS POST end. Root Cause: BIOS programs incorrect bit field to notify CPLD that BIOS access DIMM was done. Solution: Follows the newest 15G definition notify CPLD that BIOS doesn't need to access DIMM via I2C. Sesto/Reventon/Roadster : Using CPLD I/O map 16.4 bit field. SHA-1: b159e9a4d3019409cf37e1805fd15637022ff9e1 [ESGB-1167]15G Cpld Spec Register Definitions Solution: Add "BMC_I2C_DIMM_MUX_EN_N" bit filed definition to follow the newest document. CPLD I/O map 16.4 : BMC_I2C_DIMM_MUX_EN_N - BIOS writes to 0 when done w/ SPD bus during POST. Affects bmc mem 0x0F.2. CPLD sets to 1 on platform reset and hsot power off. SHA-1: e2179be9726552a0889b024b98c6efdc6d80bf84 [ESGB-785] Avoid NULL pointer access. SMM memory pool allocation only allow memory type EfiRuntimeServicesData and EfiRuntimeServicesCode. SHA-1: 57b74a1bc00c4c8ee2e1d919d0097b4175fe23cf [ESGB-1292] Display AMD SMU version. Add support to display AMD DXIO version. **************************************************************************** - Version: 0.2.1 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 01/04/2019 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 v0.0.7.0 for Family 17h * PSP Firmware Version: 00.0C.00.40 * ABL Firmware Version: RABLSSP00702013 * SMU Firmware Version: 0.36.40.0 * uCode: 08300006 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ JIT-118024: [Alar/Jalpa] (BIOSUT) BIOS setup pop up a Saving Changes error massage when save changes. Workaround: Clear NVRAM by NVRAM_CLR jumper. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update FVS mode. Set slimline 3 for SATA. Notes: FVS mode configuration: ST 1,2,4,5,6 for PCIe x8 and ST3 for SATA. 2. Fix JIT-115398: Front down USB port of 2U system malfunction. Update USB HS output current to increase by 5%. 3. Fix JIT-118346: BIOS version 0.2.0 flash iDRAC FW system will halt under OS. - Revert the code change of SHA-1: a18ae2ec914bee27f3a61cc192981eeb3127e153 as temporal solution. 4. Fix JIT-116516: [Alar/Jalpa] Use "dmpstore" to set AuditMode will get fail. 5. Clean up the unused codes. 6. Update Code Base to version SHA-1: 8574ada61edf930965baafbbec8d733fd961e4fc ------------------------ SHA-1: 09351ea32db32797ea01fd810695c9d0915473f7 Workaround JIT-118346: BIOS version 0.2.0 flash iDRAC FW system will halt under OS. - Revert SHA-1: a18ae2ec914bee27f3a61cc192981eeb3127e153; ESGB-1290 : Factory QT Build Verification Failed by backplane inventory is not complete before iDRAC receive Storage IPMI Command from BIOS - Initial Check In. SHA-1: 16dc1f301d0dc3faae953a40a3b85debf1dcaeca [ESGB-1263] Alar/Jalpa. Cordoba: set CORDOBA_BIOS_ENABLE=FALSE for 0.2.1 release SHA-1: dbbc21ede960f271a7fd36c77bcdbc792cffd49e [ESGB-853] Security - Secure Boot. Fix JIT-116516: [Alar/Jalpa] Use "dmpstore" to set AuditMode will get fail. SHA-1: 89434c59056ce7f3c0b42d4ca72858860918bec2 [ESGB-856] AMD FCH TPM Support. - Introduce a new PCD gEfiDellGenericPkgTokenSpaceGuid.PcdTpmHwInterfaceBusType for TPM HW type, LPC or SPI. - Enable RouteTpm2Spi bit so the SPI TPM can be decoded. - SESTO/REVENTON and ROADSTER will use SPI TPM. SHA-1: ae8fdee36dbeed4d3ad989d7b64cc760905dd0d2 [ESGB-1150] Moved DellSmmCppc to DellPurleyModulePkg. Currently no one seems to be using this driver. SHA-1: 5eefbbcc1812588316e12198ef004df5cf20c327 [JIT-116343][TB2 MLK] Observe the incorrect description for the F1 help message in System Profile Setting. Solution: Merge solution from NF to Leo master and the solution description is as below.SHA-1: ddc0814bf7d63ded8924505435f809b08e836813 * "Refs ticket:830" JIT-76749-"System Profile to Performance Per Watt(DAPC)" option still exist in help info SHA-1: 9b8433ecb0f1cf4034330de3164db14c2e8029b7 [ESGB-812] Solution is broken after AGESA code update, so revert the original solution as SHA-1: 976ba7c1201643c6913e01c9e5ea41ba1ba3ca62 SHA-1: 26b44ab9b752377f1e7b293f1efee0c448c37d4f & SHA-1: 5741c110a68c7082d73d00e7ade7b170c8acc21a [ESGB-992] Alar/Jalpa. Clean up the unused codes. SHA-1: 53ccadf8c0252ac2f7700274e0b3206a0c5d41ed [ESGB-992] Alar/Jalpa. Update FVS mode. Set slimline 3 for SATA. Notes: FVS mode configuration: ST 1,2,4,5,6 for PCIe x8 and ST3 for SATA. SHA-1: 67f9c5ad8d5ec7a8fd010095bddc64a952812cec [ESGB-992] Alar/Jalpa. Update USB HS output current to increase by 5%. [JIT-115398] Front down USB port of 2U system malfunction. SHA-1: fef449a4d0b06b5220af6a5dc63f027875621231 [JIT-117652] Cordoba: Modularity Core rehaul to support multi-connector devices - Device with multiple connectors now pass validation checks - Improved device connection validation algorithm - Fixed potential bugs where core entries could overwrite each other - Fixed core output lane width assigment - Fixed core output global lane offset assignment - Centralized device connection validation - F... SHA-1: ab3d7128d210f6162f0a288a5cc7973008065b8f [ESGB-1037] PCI Host Bridge - Porting for Rome Port Naples fix to Rome for JIT-113847 to reserve IOMMU HT legacy region. SHA-1: 129f02a83caaa8e9b2eb65d5d7d45df9f6860cf1 [ESGB-1196] Cordoba: Improved RiserId field assignment to cover all cases in analog to logical ID conversion SHA-1: 07cea7c60f8b24dfd610a664778b6e051b6a03a6 [ESGB-1217] Cordoba: Backplane payload parser update - Updated to adhere to BP 1-wire behavioral spec 0.981 - Does not support x16 devices because spec is currently vague - Fixed analog to logical ID conversion for slimline connectors SHA-1: 42b734dc5c00ac0562ec83e2e352f378b8a423e1 [ESGB-1165] Align to 15G CPLD Spec 2.41 - Created inventory number granularity macro to account for new granularity SHA-1: 363ce4dde369ccb33fb4d456dd2b8c881a8ce90f [ESGB-1043] Rename the macro "AGESA_DEBUG_ENABLE_BY_DIP6" definition to "AGESA_DEBUG_ENABLE_BY_DIP" because 15G hardware design uses DIP 3 not DIP 6. SHA-1: d61fbac517f786e7c1ab2a0d90c5a3e15140d8ae [ESGB-664] PCI Resource Assignment Add more debug messages SHA-1: 63adde53b808122352890b29682ec175b68bd015 JIT-118012 RSOD occurred when running the test of 2 sub-items in FirmwareManagementTest > FirmwareManagementProtocol in SCT2.6A. (system with NVMe) SHA-1: 007a255f7276d2b782f629db735020465038b154 [ESGB-1060] PCI Resource Conflict - Verification with GPUs on Reventon Change the name of the function to describe the number of times that BIOS has tried to resolve PCI resource conflict SHA-1: 55b2812912bf48268df2d8628b00dc3a86ad97a8 [JIT-113337] [LS] System always reboot when install a GPU on riser. Correct GCD add memory space for MMIO below and above 4GB: AMD/Rome/AgesaModulePkg/Library/FabricResourceReportToGcdLib/FabricResourceReportToGcdLib.c Assign valid value for PciBusNumber field in structure FABRIC_RESOURCE_FOR_EACH_RB and correct a condition in IsResourceNodeInRootBridgeAperture(): DellPkgs/DellChipsetPkgs/AmdRo... SHA-1: 3fc4cad8c10109dd03bea375c98b3633e3b7d9de [ESGB-1245] GUID should be in the format as "{8,4,4,{2,2,2,2,2,2,2,2}}" SHA-1: a9a0d955867207e8b45b65f5c2266878b2f497c9 [ESGB-1001] Add SPI QUAD IO mode to debug menu for test purpose. - QUAD 114 with 16.66, 33.33 and 66.66 MHz. - QUAD 144 with 16.66, 33.33 and 66.66 MHz. SHA-1: f951bc74f7f902560a8977f0ed76d3b54c6ef016 [ESGB-1090] Pull in DellEfiVariableCheckSmm driver to enable EFI variable access control. SHA-1: c10f0bf3465c12e32ca0b27c34135def65f8fe97 [ESGB-1134] Cordoba: Added silicon id to unicode string decoder SHA-1: 52f7fea61b30a2494e1431615d7edfb94edd5a0a [JIT-117269] Mask CTO based on PCI ID of special factory rig SHA-1: 33e18c7c3f8ec3c0f7fcd37196948af0f494696b JIT-117878 [COSMOS_MLK] RSOD occurred when running the test of 8 sub-items in HIITest in SCT2.6A. (system with NVMe) SHA-1: 79c2e2faf666b7e984ed048b953f8b2bd25af8b1 [JIT-113367] Change back FVS GPIO pin to original one because factory validation tool will be ready. SHA-1: 485669dbd28f4f8356efff0da8a489dd11c4b899 [ESGB-1090] temp fix for LOM detection fail on 2nd CPU SHA-1: 1c3d5d3279c9b540208ea57599d8d7dab3cb245f [ESGB-1134] Cordoba: Added DellChipsetDescriptionLib Implemented port id to unicode string conversion for easier debug in serial SHA-1: ef52d51bace354387f4ac303218acb71a6c8e458 [14G MLK] [(JIT-115680] 14G MLK Setting Memory Mapped I/O Base to 512GB causing lockup Update EEMI message per review SHA-1: 87ee570786b5bdc77da84410961a369bcc99ba39 [JIT-109965] Update AGESA 0070 RC4 for Roadster * Fix AGESA 0070 RC4 PSP APCB FCH_CONSOLE_OUT_SERIAL_PORT setting will causing Roadster hang inside ABL. SHA-1: f3b362c6fe6d84a0f5cc56227d901f50c810fc06 [ESGB-872] CSM - Fix system has black screen and restarts automatically when booting into Win2016 for Sesto 2 CPUs **************************************************************************** - Version: 0.2.0 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 12/20/2018 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 v0.0.7.0 for Family 17h * PSP Firmware Version: 00.0C.00.40 * ABL Firmware Version: RABLSSP00702013 * SMU Firmware Version: 0.36.40.0 * uCode: 08300006 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ JIT-118024: [Alar/Jalpa] (BIOSUT) BIOS setup pop up a Saving Changes error massage when save changes. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 0.0.7.0 RC4. 2. Update Matrox Video ROM for legacy BIOS mode. 3. Enable Software RAID feature and active its function. 4. Fix ODD device does not show at setup menu. 5. Fix JIT-115511: [Alar/Jalpa] BIOS 0.1.3 will hang up with the 2DPC memory configuration. 6. Fix JIT-116948: [BIOSUT][Alar/Jalpa] USB Keyboard response typeing very slow under DOS. 7. Fix JIT-116482: [Alar/Jalpa] External video can't workable when onboard video is disabled. 8. Update Code Base to version SHA-1: fb5c8bcbd0db022d51a6cd3825fd0d1668230d0e ------------------------ SHA-1: 6e5810a5951ffcc1af549a1b93689e2fb8f56c91 [ESGB-1263] Alar/Jalpa. Cordoba: set CORDOBA_BIOS_ENABLE=FALSE SHA-1: fb5c8bcbd0db022d51a6cd3825fd0d1668230d0e [ESGB-1102] Agesa 0070 RC4 for Alar Build Fix SHA-1: 11b90d6b484158104d128ce013b8bf843b3a7bba [ESGB-1102] Agesa 0070 RC4 for Alar SHA-1: b0ef7d8bc6471b2f75d71d72e602808b034ea7db [ESGB-994] SPD Logging on AMD platforms - Updated MAIN BIOS size for RAS_SUPPORT feature enabled. SHA-1: 76d9104fd933add32290b884bc328a3091d005a3 Revert "[ESGB-992] Alar/Jalpa. Update USB HS output current to increase by 15%."This reverts commit b385c4525f50f1d2ad2009c68642ba20a59a8c75. SHA-1: 795e992129f39555208e66a0e57076e05580d21d SHA-1: 9cf0853c534b2ea21ee005d3f2d7143dc1f439f2 [ESGB-820] Software RAID feature enabling and active it's function. SHA-1: e246778a202ff23feceecdb0a764a543f0a1c46c [ESGB-1263] Alar/Jalpa. Cordoba: set CORDOBA_BIOS_ENABLE=TRUE SHA-1: f1772e553a9cf62afb63bd65c5a66b440572ef3e [ESGB-1263] Alar/Jalpa. Cordoba: Update backplane static table. SHA-1: b385c4525f50f1d2ad2009c68642ba20a59a8c75 [ESGB-992] Alar/Jalpa. Update USB HS output current to increase by 15%. [JIT-115398] Front down USB port of 2U system malfunction. SHA-1: cc0e651004115c05d9b9d018bbf790dba6b5eca4 [ESGB-992] Alar/Jalpa. Fix ODD does not show at setup menu. SHA-1: c317c8f9ca7219e753ce6d3acf2df8be62f43fd5 [ESGB-1126] Cordoba: Fix device path for Alar/Jalpa part 2 SHA-1: aa4a104474ddabada589670e6ea569d6e241b43d ESGB-1292 fix DXIO display crash issue SHA-1: ea0f2c0675612cddd9c5141f346b8a55f0b4c6a3 [ESGB-1297] Create DELL_CPU_DEAD_LOOPRemoves need to add a BaseLib reference to a driver or library's INF when a need for dead loop arises. SHA-1: 6defe44a9ba9c1f028379c9e7123b62a1a4b0ca6 ESGB-1292 Display AMD DXIO version in setup menu SHA-1: 70d57d88dea340b03a5d6309ed5cb5a9f21c7de5 [ESGB-1102] Agesa 0070 RC2 APCB fix SHA-1: 99b32c3413d245a0da27b790866b349c94504a5f [ESGB-1292] Display AMD SMU version Fix build issue with Intel Platform. SHA-1: 8179341dab73513219a248b9db4c02220ee799f5 [JIT-112639] Pause not working on console redirection.Terminal press space bar is not working in serial console redirection, also keymap message is always displayed even if console redirection isn't on. Move the decision about whether console redirection message should be shown to BDS, which has the policy data and can make the decision. Then signal an event to have the message shown. We make sure that the event signal happens after the terminal... SHA-1: 6ae806d49714015b008e343ada888dc0768444de SHA-1: 507fab043fcfb9fe7c016d2daa39f7cb35fdf2b3 [JIT-117269] Mask CTO based on PCI ID of special factory rig SHA-1: d5428a6cde3a23b3efa05a8311cd81e310c7e85c ESGB-1292 Display AMD SMU version in setup menu SHA-1: bc063042f4cb3f370b066e25ae82cdbb44e33c3e JIT-116935 Not entirely sure this fixes the root cause of the reported issue. In PEI, if an ID module having the "load defaults when rebranding" bit set is asked for a default value for some attribute which is not in the module, then the code will read far beyond the proper area of flash. This error happens because the bit is stored as the upper bit of the NumberOfDefaults module entry, and it ... SHA-1: e455b4d00902e74b42bcbcaa6149e9a595125aaa [ESGB-781] Turn off debug message in UsbMassStorageDxe to avoid poor performance for copying large files. SHA-1: 44e90cdf7d978de4c38554b110086f022735e36c [ESGB-992] Alar/Jalpa. Set 256KB FV size for SWRAID driver. SHA-1: 6c68087b70ab07103efb7a62ee4392dc21aa8d4b [ESGB-1001] Add DellSpiAccessDxe driver to produce DELL_SPI_PROTOCOL so the consumer (DellRaidFmpDxe) can locate the protocol to write data to flash part. SHA-1: 57e329220e55a6407b5d9fd19c95e5eb3d674b04 [ESGB-811] Rome has 4 SATA controller but just only one controller is updated to correct SSID/SVID and others are porting with default value in AHCI/IDE/RAID mode. Root Cause: Rome has 4 SATA controllers but just only one controller catches correct SSID/SVID (via PCDs "PcdSataAhciSsid", "PcdSataRaid5Ssid", "PcdSataRaidSsid") for programming. Solution: correct the mechanism to assign correct and... SHA-1: b6eb3c73156a93a70bf45d4501437d7de787248b [ESGB-1292] Display AMD SMU version Return the SMU version in Unicode Null-terminated string. SHA-1: 4d6a7e49c72fb358168e30a1ca39bcfcac83aa62 [JIT-104103] Changes for not attempting link recovery with first degraded link width. F1/F2 prompt and error logging will remain same. SHA-1: 43b8673ea0fe6d15786e319dfcc385d88a415a39 [ESGB-872][ESGB-1032] CSM - Change debug print level for USB keyboard to improve performance. SHA-1: 935f33d273d6fdb8fc21ed3f449e6415fd4bdf23 [JIT-113367] Non-Rips SD card should not be disabled when set all ports off in BIOS setup. SHA-1: 00d3ea1d9bcd941d68e2b42d91af0d601404a968 [JIT-117152] SMM is locked earlier causing SavePreviousBootErrorToMem (non-SMM code) to fail when there is a PCIe error during previous boot. Re-write the code so that no non-SMM code is executed when handling PCIe previous boot error SHA-1: c17c87e2b34f80fa88fac743f14f062712f429fd [ESGB-607] revert SHA-1: aa0c9f39de4416fb2b43574c55f86aef7c36715dOffset 0Eh has already been used; take 0Fh for FMP failure instead SHA-1: 5a8cd46a7612f975e1faa49cb4657918e186e915 [ESGB-992] Alar/Jalpa. Adjust FVMAIN size. Reduce size because original build fail only exceed 0x1c8 size. SHA-1: ccb42d4e137a2fc7512481e1f4b80ba65cdb01fe [ESGB-1263] Alar/Jalpa. Update backplane static table. SHA-1: 1f729bf3600fc97a8f545b542afb3a45501443d6 [ESGB-1001] Remove SpiCommonLib library dependency. SHA-1: f333c833d9802dec93f3f7f2d35bcf412a067fac [ESGB-1001] Add function to send Write Disable CMD (0x4h) to flash part. SHA-1: 9b97db0484972c641ee7a307638bc26d3a1f7632 [JIT-115413] Syncing EDk2 changes for NVMe driver(supported languages). SHA-1: 2ca9ecdf9ca818439e6980b90dcea863158435d5 ESGB-886 RAS code bug fix SHA-1: fecf8cdfd1def2e4e51c87549dfc93bb979fae59 [JIT-116989] Disable Relaxed Ordering for the NVMe Subsystem in AMD Platforms SHA-1: d316e600b47da55c503eee3c4c4a92a6056210bd [JIT-111363] with Zoom Card, POST will show a black message boxAdd workaround to consplitter to consume leading white space printed to console out. Workaround is Disabled by default for all platforms. SHA-1: e2db920e2891e99f8754d94d194b03ae69562498 JIT-112165 : SWPT_RTS+_LC_PI_FI - User Defined Delay becomes writable when AC Power Recovery Delay is not set to User-Defined SHA-1: 487b4f08c6ba40b5ad28b7ad0cb9c3cdb6bcf85e [ESGB-992] Alar/Jalpa. Fix build fail. SHA-1: 4a1c854342c5706934ee736c33f6b5144e289e97 [ESGB-992] Alar/Jalpa. Access correct PSP entry type based on new struct definition. CPI - SHA-1: 4657420af6481db9d695cf4dfa49efc86c79d69b SHA-1: 4f97c753a95dfa42c4f1ca0675774c91173ad31c [ESGB-781] Turn off debug message in DellUsbSmmCore to avoid poor response when typing USB keyboard. SHA-1: 6824a9946108f0aeaac692047a6de3bf2b7251b9 [ESGB-1292] Display AMD SMU version Read SMU version from an SMN scratchpad register. SHA-1: 946f774d640d8c82b7e9c598ab36019dcd9bc9bb [JIT-116294] AMD BIOS generates incorrect GESB length for UEFI CPER PCIe error records SHA-1: 465dac676f6e6b2324950cfbdb8d7995918cad2f [ESGB-1126] Cordoba: Fix device path for Alar/Jalpa part 1 SHA-1: 2335b82546718f39cfd3dcc7eb987c88fcc54d79 [ESGB-1102] Agesa 0070 RC2 for ALAR - Will not boot to Windows. Windows keeps resetting SHA-1: fc5ef640da3aa8cad4f5dd7a8311e0d245b9971a [ESGB-1090] SESTO - fix build fail when cordoba bios enabled SHA-1: a18ae2ec914bee27f3a61cc192981eeb3127e153 ESGB-1290 : Factory QT Build Verification Failed by backplane inventory is not complete before iDRAC receive Storage IPMI Command from BIOS - Initial Check In. SHA-1: 0238989bf5faadd7f419695dcae8f7e060ea4a03 JIT-111201 : 14G Juno MLK : Diagnostics option greyed out Showing not available - Initial Check in. SHA-1: 1f103f9436cf2a5feede42c1dad24fdcaff237f7 [ESGB-664] PCI Resource Assignment Comment out a function call and some serial messages to reduce boot time. SHA-1: cbf02ed526bc8e501be0a7334a9b262994a9565d [ESGB-1043]: iDrac Serial - Porting for ROME Signal iDrac from port 80 that x86 is starting to execute. SHA-1: da96505d1cfcb6b2f7c9122ae388e5bb2fff95a7 [ESGB-1228] Corrected a statement in python script so that the generation of PcdValueInit works. (The linking still does not work.) SHA-1: 9418d4f8815cf922b86fc6467d14f16d190fd343 [ESGB-1126] Cordoba: Alar grid selection bug SHA-1: 507280819098441e33377966ae0e8d20b3cf8638 [JIT-112327] disable ARI FWD enable for Nvidia T4 cards installed SHA-1: 424d1f2cf47227fbc66c5fdd754c728f9e4f0673 [ESGB-1224] enlarge DXIO entry array for some configuration requirement. SHA-1: 8800c2697c565a2bc94c8d9ceba0ac1a6d5fc2a9 [ESGB-849] ACPI - Platform Porting Disable BIOS setup option "NUMA Distance Enumeration" (ACPI SLIT) on all ROME projects. SHA-1: df8f26e25b3ad59e25cf19e9d4870de2b4903938 [ESGB-1166] iDrac reset step and execution are incorrect Root Cause: Some bit field definition for 15G CPLD was changed, so it caused iDrac relevant function to access/program incorrect registers. Solution: Follow the newest 15G CPLD IO map register definition to fix the correct register for access and programming. SHA-1: 9d19c7c63033f23ff51c24efa2d7419863b00c4b [ESGB-849] ACPI - Platform Porting AMD platform ACPI tables structure improvement. Move all AMD generic but duplicated ACPI tables to DellChipsetPkgs. SHA-1: 763b481f3602eb10c039797ebfc4c8770deee4cb [ESGB-1001] Using BasePciLibCf8 PCI library instance in early PEI phase. SHA-1: ba3bfd8cd34ae61eb178da710bcf4c29501d2248 [JIT-114027] Un proper lclogs showing while Downgrading BIOS from MLK 1.7.20 to 1.6.9 version SHA-1: 02d2f7f2a9d44c25013428c4513b7aadafefdac1 [ESGB-1165] Cordoba riser helper functions Introduced DellBaseLib2 SHA-1: f8e87d93be49fdf320358126c76449b595415079 ESGB-1051 Add batch file and script to check fake OEM ID data files for correctness. SHA-1: efbadb39a18e920d8eaa9543723683cbeb9ae745 ESGB-1051 General refactoring and comment clean up/additions. SHA-1: c0be0eec9c100e8e5018156f60f81a0d50418f1e [JIT-116312] Fix JIT-116312 MLK BIOS fails to return chassis serial number SHA-1: 9ccf76ffb08d5cb70ea8c3e2461de43eb34cb469 [ESGB-1224] SESTO - cordoba support [Cordoba] .Update port info in dpi pci from Cordoba .Add to support x4x4 bp .Add to support x8x8 riser SHA-1: 5e0475b931718a09a61dbf1125045899d06b2918 [ESGB-1126] Cordoba: Fix SPI corruption issue part 2 SHA-1: 850cfd3f1088f4ba8f43edb074b687a956e42ce6 ESGB-886 fix ras build issue, and the RAS module did not be dispatched issue SHA-1: 0a125f72d8788db0a9b4521358bffcfcfab1b3f9 [ESGB-1126] Cordoba: Fix SPI corruption issue SHA-1: 4870e9390d6d3a1efbaa93ac38fc2902edd05ad0 [JIT-109547] Increase PCIe SSD Memory Allocation Size from 2MB to 4MB SHA-1: fef73e3a7d3f2731f959f87976edfde6285d3411 ESGB-1051 Fix checksum issues when the size of the default data file is 256 or more bytes. Added a few more global variables. Modified the output format slightly to better line up things and to add some checksum-related info. SHA-1: 87d9ba7ff8ce5f31d57ecdd05d09f0429eb49b49 [ESGB-1005] Replace data ROM flash memory access with SPI access. Get PM header via SPI protocol if OEMID region is not memory mapped. SHA-1: bf59c1c96ed5e057e48d325792e7f26f8d9edfdb [ESGB-648] Dual FLASH part Design. Get OEMID region information from PCD if DELL_SPLIT_ROM is enabled. SHA-1: 3ff96ad51179a6b87ce1ef0750167c7e397dae3f [ESGB-1005] Code change to let ACI DXE/SMM driver can read data ROM on 15G dual ROM system. Current design is using memory direct read to read ACI data from flash part and this works if the region is memory mapped within 4G ~ (4G - 16MB). On 15G dual ROM system, ACI region is in data ROM which is not memory mapped so the code change is made to let the flash read use DELL SPI wrapper protocol to... SHA-1: a0b4083a46f7f2aa01ab6edcdd3bd3f0a9a33804 ESGB-1051 Fix issue when string's ending (NULL) hex byte is the first and only one on a line. SHA-1: afb425de8adf0460ef19f1bfe1312889efe60060 [JIT-116294] AMD BIOS generates incorrect GESB length for UEFI CPER PCIe error records SHA-1: bcd4f82e06a86562312ac44b1cc32d8ac21922b2 [ESGB-1105] iDRAC-HII RTS+ X03 (SWB# 2H6H5 X03) into the latest 14G BIOS Releases. The changes include defect fixes for,JIT-115734: 14G RTS+ iDRAC-HII: Security: Sensitive data cleanup. Kindly inform us the BIOS release to which this patch will be integrated. Note: 1. These changes are for all platforms push binary to all platforms 2. iDRAC Settings Version is 3.00.00.36 SHA-1: 31c876aee300e4740c9ce2e89492b1980595d362 [ESGB-1224] add condition to switch 14G/15G CPLD Original check-in broke Kepler and Surveyor builds, fixing build error SHA-1: 24fe84b942b7cf62c1639ed73cd087f75577a032 [ESGB-554] [WSMT Changes for 14G MLK]: -Dxe driver changes for complying with WSMT requirement of commbuffer to be one of (EfiReservedMemoryType, EfiRuntimeServicesCode, EfiRuntimeServicesData, EfiACPIMemoryNVS) -Original check-in breaks AMD platform builds, fixing build error SHA-1: 2a3cd18581bdf925aaa461895156e97a0a3dad9e [ESGB-1005] BIOS NVRAM attribute can be accessed from data ROM. Current design is using memory direct read to read NVRAM attributes from flash part when normal/backup NVRAM regions are memory mapped within 4G ~ (4G -16M). On dual ROM system, the regions will reside in data ROM and not be memory mapped so the code change is made to use DELL SPI wrapper protocol/PPI to read NVRAM attributes from ... SHA-1: 36e742f8a178dda2ccab440fe61835879bfd007b [JIT-111687] iDRAC9 3.30.30.30 X39 : HII : PCIe SSD Export Log : PCI Vendor ID is blank SHA-1: a2ddf52f2627bb52c1f6f57807a252e1fdc8538e [ESGB-1136] PciChipsetInitPeim changes in GetDxioTopologyTable2 before creating DpiPci Table in Chipset Initialization Code. SHA-1: 976ba7c1201643c6913e01c9e5ea41ba1ba3ca62 [ESGB-812] DeterminismPercentage value is always overrided by AGESA setup setting via CBS library and it causes user can't change the setting. Root Cause: Link incorrect library to cause the DeterminismPercentage value be overrided. Solution: Remove the library connection of CBS library. [NOTE] Current AGESA code doesn't provide any interface to customize the DeterminismPercentage value as NF, ... SHA-1: bb5015f55857efd30fa4f661ff48688f89083292 [ESGB-1126] Cordoba: fix build fail for Alar/Jalpa SHA-1: 4ced348d896a9799d29f1e8f2e0f1ed0dc8d4d63 JIT-115873 After set BIOS settings(HDD Placeholder to enable and install OS on PERC, PERC boot option will become the 1st boot option Extend the feature ([ESGB-578] Support HDD Placeholder in UEFI Boot Sequence) to support FQDD RAID.Mezzanine.xxx SHA-1: 6ae31f91c08444f265f0e252bb7f4c633770ccea [ESGB-1150] During Whitley development, we encounter SMBIOS issue. So we improve SMBIOS related debug information to developers. SHA-1: 828c4ff9ece43b6cb9b8c5fd91f3cf4a996a1300 [ESGB-1227, ESGB-1224] Cordoba: Sesto grid copmletion and static override of SNAPI Riser2 from Cordoba SHA-1: 383cd4efd3030dfab3a3a947e2b8b0b9ea7eb679 [JIT-115688] BIOS 1.7.23 RSOD -AMD also needs this change. SHA-1: 729effd3e50e73ee3c46365be4ac9010562bf947 [ESGB-1126] Cordoba: build issue using wrong #define in Alar SHA-1: 540ea5a5d8d71be3f6f4141be27cc59801dee2c9 [ESGB-992] Check in source code to build FWSigPtch.exe SHA-1: bb9637fd77efb7254a51a603abde40e602fde3b8 Revert "ESGB-541: [SCP] Move SCP processing before ConnectAll()"This reverts commit 3dda94b0a3a9d5cdde8c5bdedf269be434711497. revert this change due to SCP will configuration fail with new code base SHA-1: fc1a809ed36ab0183bede76f7b3785365f956cb7 [14G MLK] [JIT-115335] 14G Benelli MLK[April PT] : Seeing error message as ¡§Unable to display Lifecycle Log¡¨ in R740 server SHA-1: 0968f6e3fbbad3e111fecac21295b32e5299b9bb [ESGB-1126] Cordoba: Grid changes Hight encoding readable SHA-1: adab523e71bcb8953ef1ed1ba7338df94b32d8a6 [ESGB-829] PPT configuration is incorrect. Root cause: BIOS access wrong register to acquire incorrect PPT value for configuration. Solution: According ECET-6903 comment from AMD, implement the correct PPT value via access correct register (0x5D314 and 0x5D318) for Rome. Register bit field description: TDP and Package Power values can be read from the following SMN addresses: SMN: 0005_D...SMN: 0005_D318h 31:30 Reserved 29:21 MP1_MinTDP. Minimum configurable TDP ([Watts] [unsigned]. 20:12 MP1_MaxTDP. Maximum configurable TDP ([Watts] [unsigned]. 11:3 MP1_TDP Default socket TDP [Watts] [unsigned] 2:0 MP1_MaxPPT: MP1_MaxPPT[8:6] Maximum socket power limit [Watts] [unsigned] SHA-1: 6c630f8cdc937bcbc8a28f6e69ab173f01da6282 [ESGB-849] ACPI - Platform Porting 1. Implement DSDT run-time patching interface for ROME projects. 2. Implement Dell ACPI WMI interface for Naples&Rome projects. SHA-1: fd9f6ac72ee71f381e7bd8540793977c6b295d9a [ESGB-554] Copy data from communication buffer to caller input buffer. SHA-1: 871665788aa226144c2a5eab6ca0e3597bbd843d ESGB-554 [WSMT Changes for 14G MLK]: -Dxe driver changes for complying with WSMT requirement of commbuffer to be one of (EfiReservedMemoryType, EfiRuntimeServicesCode, EfiRuntimeServicesData, EfiACPIMemoryNVS) SHA-1: 6d437d0e75d770b5176fd754880693fe869af9c7 [JIT-115688] BIOS 1.7.23 RSOD SHA-1: d7d1ab8d055bed29575a848c40ccc9a1aea70fa9 [ESGB-1111] (ESI) Personality Module to enable Wrigley Link Training Error Work Around Sometimes Wrigley card does not train to X16 as it should. This PM can be enabled to detect case where it trains to something other than X16 in which case its root port is disables and the enabled which causes the Wrigley to retrain. SHA-1: cbf73be93dbc3be467fabee27141086b41f0148e [ESGB-829] TDP configuration is incorrect. Root cause: BIOS access wrong register to acquire incorrect Max/Min/Nominal TDP value for configuration. Solution: According ECET-6903 comment from AMD, implement the correct TDP value via access correct register (0x5D314 and 0x5D318) for Rome. (MaxTDP=240, MinTDP=225, Nominal=225) Register bit field description: TDP and Package Power values can...SMN: 0005_D318h 31:30 Reserved 29:21 MP1_MinTDP. Minimum configurable TDP ([Watts] [unsigned]. 20:12 MP1_MaxTDP. Maximum configurable TDP ([Watts] [unsigned]. 11:3 MP1_TDP Default socket TDP [Watts] [unsigned] 2:0 MP1_MaxPPT: MP1_MaxPPT[8:6] Maximum socket power limit [Watts] [unsigned] SHA-1: 79b3520b79df8e9d50956a5fad8bcabba857c1be [ESGB-648] Synchronize the code from DEV branch to master for EFI variable service. Current EFI variable service is using physical address to read the content from flash part and this access is based on a presumption that the NV store is memory-mapped within 4G ~ 4G-16MB. So if the NV store region is not memory-mapped, we need to send read command to flash part for data access. SHA-1: 1e98ad7b1c349f9928b9d70ae79498a2371b6b9a [ESGB-1048][Skyline] Fixed JIT-112160 RSoD after applying server template to MX740 SHA-1: 207d4962dfd74bb4e94ede70dd30e8be82c2c33c [ESGB-648] Synchronize the code from DEV branch to master for AMD dual ROM. SHA-1: 6fb1fcab8e239558ffdd12fe266eacfe47dded60 [14G MLK] [(JIT-115680] 14G MLK Setting Memory Mapped I/O Base to 512GB causing lockup Add F1/F2 to warn user MMIO base is below TOHM. SHA-1: 413cda5fc46d5bcd093240aa1e857ee9c04aa1dc [ESGB-1094] Cordoba: Platform grid platform minor type support added for Sesto and Roadster - Grid related code clean up for Sesto, Roadster, and Alar SHA-1: 82fe1546e04b31d10360ae92c92274d6b86fc006 [ESGB-1224] CORDOBA clean up SHA-1: b6f60cab8662f03c44dfc3dc974ac0e5a2f09aa6 [ESGB-1196] Cordoba: Analog ID to Logical ID conversion in DynamicDeviceDescription Driver SHA-1: fa07e2e50cb8c45ce86de6de3ed62f0d4429ac85 [ESGB-1111] (ESI) Personality Module to enable Dell UEFI NVMe driver for all M.2 devices. Correct code that will be true when a specific personality module has been applied such that Dell UEFI NVMe driver gets loaded for any M.2 device discovered. This is needed so that the M.2 devices on a Wrigley card are included in the setup menus. Previous attempt added code in an incoorect place which has been corrected here. SHA-1: 5e8cf1b9402e847e822d4bdf8778fd91bbc8e908 [ESGB-829] TDP configuration is incorrect. Root cause: BIOS access wrong register to acquire incorrect Max/Min/Nominal TDP value for configuration. Solution: According ECET-6903 comment from AMD, implement the correct TDP value via access correct register (0x5D314 and 0x5D318) for Rome. (MaxTDP=240, MinTDP=225, Nominal=225) Register bit field description: TDP and Package Power values can...SMN: 0005_D318h 31:30 Reserved 29:21 MP1_MinTDP. Minimum configurable TDP ([Watts] [unsigned]. 20:12 MP1_MaxTDP. Maximum configurable TDP ([Watts] [unsigned]. 11:3 MP1_TDP Default socket TDP [Watts] [unsigned] 2:0 MP1_MaxPPT: MP1_MaxPPT [8:6] Maximum socket power limit [Watts] [unsigned] SHA-1: f753ebe0174a387ea044841d730766139b764228 Issue fix - [JIRA] (JIT-111686) Lifecycle Controller: HII : PCIe SSD Export Log name contains 8 blank spaces SHA-1: cb8d2d49b940b05149613a9ed2ce7e3f3f7e1079 [JIT-101951]14G RTS+: iDRAC system erase feature for NVDIMM component, during POST it reports executing SCP BIOS config job change naming from "Processing SCP Configuration Task" to "Processing Configuration Task" SHA-1: e9564136f9a624e0fa39070ad5b03366b8a91cec [JIT-115688] Program correct base/mask in MTRR when there is only one video frame buffer. SHA-1: 84978ac471e7a901bd3aa0c27b9898300b044db4 [ESGB-1070][JIT-110931] [Odyssey] SOL OS redirection is not working with BIOS 1.6.2.(cherry picked from commit 225b000b0f6753f4af989fa9e77473aae36f3af3) SHA-1: 3cf71ef04091dde8825e7daac08ac56328f92bc5 [ESGB-1022] Modified EDK2 build tools so that it generates all INFs we need to use in DellRestrictedBinaryPkg. Also updated the file list for some file name correction. One known limitation is we need to add GUIDs used only in certain libraries to its consumer to prevent linking issue. SHA-1: 5fafe382913b561c3f38bfc23a77312c4a728bc5 [ESGB-1224] CORDOBA - fix (1)x4 DXIO fail (2)incorrect WAFL counting SHA-1: f7b2039e99198034b5357f76101dc3f12d847206 [ESGB-1001] Fix build error. SHA-1: ff25ed49e53f58e865ad6497eb11b1ecfa628f5d [ESGB-1001] SPI Development. - Common function for flash linear address convert. - NV storage check: - Using PCD values to get region base and size. SHA-1: 678fee8ad9325786af962102045539cddeb4e105 [ESGB-1224] fix build issue on ALAR caused by "SHA-1: 21ae3b75" SHA-1: 8367c8830b94ac48e3798a50b68ae99e62ad1094 [ESGB-144] dynamic report 1P or 2P table. SHA-1: e3a36c62e48e43fa40f92a9ded5031989f205d0b [JIT-115688] BIOS 1.7.23 RSOD SHA-1: 21ae3b755881440f09f1fb906c8330b1f59af6ed [ESGB-1224] add condition to switch 14G/15G CPLD SHA-1: 79361e8836d7b45f577534f1ee98be0ce847c6c6 [JIT-110878] SFF PCIe SSDs listing twice in system inventory revert the change: "Refs ticket:20" implement sub-instance for PCIE SSD upstram/downstram and SSD drive for RedFish support. SHA-1: 647b3e7a67ab9363f38f5f7870bdb81b310b9a28 [JIT-115633][Pioneer_MLK] Boot Options can't be changed with BIOS 1.7.23(0XGXR_X23). SHA-1: 839a78a8102b5becafc292174177246589818fb7 [ESGB-1001] Data ROM access in SPI PPI. SHA-1: e0eb470c2d27bb51b145a07cdc9d102de584c7f7 [ESGB-1274] Cordoba: Sesto PCIe/Riser cohabitation conflict resolution- Static description driver cleaned up - Implemented compilation flag logic to select between 'normal' behavior and debug behavior - Bugfix for cordoba riser payload override platform hook - Static description driver selects applicable PCIe descriptions if their corresponding riser is not plugged in SHA-1: 7b50c56964e2567e793ff8ea6d4bc5789817e2e5 [ESGB-1139] Cordoba: Floating devices core analyzer support SHA-1: cfc04a02d48482e57af3d0d50c438d02b11ea70b [ESGB-828] Rome RAS Porting SHA-1: 5d658b08670d7805d509716a8bf0e0269af106e6 [ESGB-144] SESTO - patch for cordoba boot issue SHA-1: 3f1a2babe9d253998f200e53973408c35cb02f82 [ESGB-1043] PSP debug message can NOT be spewed out via iDrac"This reverts commit 9974f500c89b8e99621cdf8a1d30a650f9746eb5. SHA-1: 27677a1d6488aac1313bf416a6eb657dd5e53b13 [ESGB-1002] Initial check-in for early PEI code to initialize data ROM based on code ROM. SHA-1: 153418e6deaa6b59dd6ffdd29ce774d3070c43af [ESGB-648] 15G - Dual FLASH part Design 1. PCD value for NVRAM shadowed DRAM address. 2. Various PCDs to represent linear flash address and size of flash regions in both code ROM and data ROM. SHA-1: 64d96001904ce188ce291c136d936fc109f1625b JIT-115682 Certain BIOS Attributes are written on every boot with the same valueIn function AreAttributesIdentical(): * Skip the attribute flags check altogether. * Rearrange checks to make the fastest, simplest checks first. * Add ability to check only the data or also check the name and GUID. In the two functions that call AreAttributesIdentical(), only check the data as the name and GUID have already been checked before. SHA-1: 4b18372a51caf6d3705a62cc29e0588852bbaa0b [ESGB-1218] Cordoba: Cordoba 1.0 Riser, Slimline, and Riser-To-Slimline Parser- Does not support Sesto/Reventon's SNAPPI risers (riser 2s) - Does not implement full Riser-To-Slimline flow - Analog ID to logical ID conversion not implemented SHA-1: 391b9b716487f06dfe40320625c46dbfbab249d9 ESGB-1136 Rome Chipset Initialization Clean up code. SHA-1: 391b9b716487f06dfe40320625c46dbfbab249d9 SHA-1: 268c7b4301dc451d5d7631a7dcbc8fb59f6b563d ESGB-889 Spread Spectrum Clocking (SSC) Options to disable SSC on AMD. SHA-1: f2a603bf3eee6ebc375d28174fd07261d706da03 [ESGB-1043] GPIO initialization was done, and the defect about print PSP debug message via iDrac was fixed too. We can use DIP 6/DIP 3(15G hardware design) to control print message via iDrac, so update these settings 1. DEFAULT_DEBUG_PRINT = 0x00000000 2. PcdAmdIdsDebugPrintSerialPortEnable = FALSE SHA-1: 9974f500c89b8e99621cdf8a1d30a650f9746eb5 [ESGB-1043] PSP debug message can NOT be spewed out via iDrac Solution: Update AGESA ABL binary to fix SIO initialization defect. APCB settings for PSP debug message print. BLDCFG_FCH_CONSOLE_OUT_ENABLE 1 BLDCFG_FCH_CONSOLE_OUT_SERIAL_PORT 0 SHA-1: 6020cb306cd8f43d95443b459f143e9779f05193 [ESGB-648] Generate physical memory address if DELL_SPLIT_ROM is disabled. SHA-1: 8c52f628b3bc811c8aef7b73b57201ee2ecb2fde [ESGB-542] support http post SHA-1: 44b8c7dbf6c0d438210f547d70302df2d9d9c531 [ESGB-648] 15G Dual ROM Support. - Auto-gen process generates flash linear address in FLASH_REGION_STRUCT when DELL_SPLIT_ROM is enabled. - Build script skips recovery binary creating if RECOVERY_ROM_UNSUPPORTED environment variable is set. SHA-1: f703b45599485e7041e942dcf37820bb48c61317 [JIT-110222] Advanced Error Capabilities and Control register changing value after being hot plugged SHA-1: 419c54d3545b3e50817198ad974ca9c36db5ddac [ESGB-1108] Updated the code not to use Attribute for Aged DIMM flag. This helps to reduce writing to attribute every boot if the system have any Aged DIMM_DEVICE_TYPE_NVDIMM(s). SHA-1: 8fdcde969942d3e4e6375ef203264a281a2382cd [ESGB-809] FCH - GPIO ROME GPIO implementation 1. Fix local/remote GPIO condition in DellFchGpioLib. 2. Modify AGESA CPM FCH function to support remote GPIO pins. 3. Modify AMD platform CPM driver to support multi platform GPIO tables. 4. Modify all 15G ROME GPIO tables to enable all GPIO entries. SHA-1: b5a8bec612cd08e276e2f49b58bdc662fd9a3461 [ESGB-1192]provide a method to support user could get bootoption status from SetBootOrderEn/SetBootOrderDis attribute. -add 2 flag attribute for attribute changed SHA-1: 7d4ca9611c226b8af3e6fcb57a6cfa4953b55540 [ESGB-872][ESGB-1032] CSM - Fix system hangs when booting into RHEL 6.9 installation media for ROME and NAPLES. Sync all fixed MTRRs between BSP and APs. SHA-1: c1db6043d26740b37d35b91f2266e34d8477b1c7 [ESGB-872] CSM - Update Matrox Video ROM for legacy BIOS mode - Fix video cannot be displayed on ROME 1P configuration - 8254 timer 1 removal SHA-1: 8d8e0d3f1169ae6edcb407cb52007899ede00bc6 [ESISE-486] ESI/DSS feature to support flex a override platform IIO feature turned off by default and only exposed with a Personality Module. To enable ESISSDSettingCust1" so that we can merge Huangshan(new HDDBP) changes to support 4 NVMEs in R540 planar(Rosetta). Here are changes described, (1) Added a new attribute "ESISSDSettingCust1" (2) Detected if "ESISSDSettingCust1" is active as new HD... SHA-1: 28f26e2907bfd660f745faa5f1802326379dcfa4 [ESGB-1108] Fix the internal structure of the SPD log. SHA-1: 2f7fee19975e05ece44387acb8c987814ba3b8a1 JIT-113965 Lose attribute settings when flash MLK back to pre-MLK Fix for this issue going backward. The attributes were being wiped when the very last one was not able to be decoded. Have the flash FMP write a non-encoded attribute with a guaranteed unique value so that the attribute flash will be in a state that will NOT cause any older BIOS to wipe out all attributes. SHA-1: fc4d21706574181ef92f84745f26e8d0bdef473b [JIT-110878] SFF PCIe SSDs listing twice in system inventory revert the change: "Refs ticket:20" implement sub-instance for PCIE SSD upstram/downstram and SSD drive for RedFish support. SHA-1: cbfc3f2d19615b4a97e6d76690a0cd6933212fc4 [JIT-112080] (CR) Disabling Cryptographic erase functionality for coldstream devices SHA-1: 28f5e157a2253d7f0e4612775e559bd09472f9ad SHA-1: 91547da19593d93fcedab5652047023583049eee [JIT-114433] NVMe drives not showing correctly in HII [JIT-113310] iDRAC 3.30.30.30 Build 42 : R640 : System / Inventory lists double entries for PCIe SSDs [JIT-111932] [Pioneer-MLK] PCIe SSD(NVMe) displayed abnormal quantity in iDRAC GUI System Inventory. [JIT-111582] Toshiba:CD5:R640:Lifecycle Controller:HW Inventory:PCIe SSD: Incorrect inventory values [JIT-110878] SFF PCIe SSDs listing twic... SHA-1: 79f5a996702454b05f9ee2777832d0232aaed422 [ESGB-609] Add support for New/Old prefix processing for PersistentMemPassphrase attribute SHA-1: 91825a72f23e13a62cbddaeba27d2624238befe6 [ESGB-809] FCH - GPIO ROME GPIO implementation 1. Review and clean up GPIO library related header files 2. Move GPIO initial to early PEI phase instead of using AMD CPM tables. 3. Modify DellPlatformGpioLib to support all 15G AMD platforms 4. Modify DellFchGpioLib, using MMIO access instead of SMN and support remote GPIO pins 5. Review DellPchGpioLib, sync library interface with intel code base... SHA-1: 9ee62d47eace6edafd24ca89cf5f5e91802f95af [ESGB-992] Enhance current code to reduce modification of AGESA code and improve performance of DPI porting. 1. Move AGESA pcds initialization process to platform common layer. 2. Remove redundant system ID definition in DellBrand.h owned by current platform. 3. Clear redundant platform support list of RBU header 4. Avoid to use system ID in common chipset code. SHA-1: 0644859e32417fdc247855b0f3af401d02862a7d [ESGB-57] AMIGuiPkg: Fix issues reported by Coverity. - CID 112461 Out-of-bounds access. AgiDrawStdRect() is not used in current code, so remove it. SHA-1: 7a61a9617a9c991509d8d1875edb0a89f2a3b5eb [ESGB-1001] Fix out-of-bound access issue reported by Coverity. **************************************************************************** - Version: 0.1.4 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 11/16/2018 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 v0.0.6.1 for Family 17h * PSP Firmware Version: 00.0C.00.35 * SMU Firmware Version: 36.31.0 * DXIO Firmware Version: 36.483 * uCode: 08300006 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. SATA HDD tray 1, 2 of Alar 1U and HDD tray 1, 2, 5, 6 of Jalpa 2U can't detect hdd devices. Please use HDD tray 0, 3 for Alar 1U system, or use HDD tray 0, 3, 4, 7 for Jalpa 2U system. Note: UT planar has fixed this issue. 2. The NVME does not work at below configurations. - Alar 10x2.5" NVME(8SAS+2NVME) BP(DPN# KXJKN) with Mini-PERC card populated. - Jalpa 24x2.5" NVME BP(DPN# M7X6F) without Mini-PERC card populated. Note: The BIOS 0.1.4 with iDRAC X03 has fixed this issue. 3. The ODD does not work at below configuration. - Alar 4x3.5" SAS/SATA BP(DPN# JWG9T) with Mini-PERC card populated. Note: The BIOS 0.1.4 with iDRAC X03 has fixed this issue. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Correct the F1/F2 messaging for DIMM training failures. 2. Correct iDRAC device path to fix PCI device yellow mark in Windows 2016. 3. Workaround no screen display at legacy BIOS mode. 4. Enable Secure Boot setup item. 5. Workaround memory 2DPC cannot boot up system. 6. Increase the number of MAX. PPI support for the growing various PPI demand to avoid system post hang when TPM card populated. 7. Update PCIE port info table to fix ODD fail at Alar 8x2.5" SAS/SATA BP(DPN# 94J5V) and Jalpa 8x3.5"SAS/SATA BP(DPN# CP90M) configurations. 8. Update Code Base to version SHA-1: a646a39f1906173eaf0b0d0a2a292640420bd384 ------------------------ SHA-1: d50da0e098c55ad5e87af0ed3803e925ce4b5037 [ESGB-992] Alar/Jalpa. Update PCIE port info table to fix ODD fail at some configurations. SHA-1: a8f779f70eb8cf119322a9ef4a2324b0aa120da4 [ESGB-1131] Cordoba: DpiPci2 start/end lane fix SHA-1: f5aafdd77755d54588285762f52e00c75c2fdc40 [ESGB-1131] Cordoba: Alar Backplane static description update SHA-1: cdaec4c53917e6b5e6850d720e19fb0b883b6cf1 JIT-113965 Lose attribute settings when flash MLK back to pre-MLK Fix for this issue going forward. The attributes were being wiped when the very last one was not able to be decoded. When going from a newer BIOS that had a new attribute encoded at the end of NVRAM back to an older BIOS that didn't have that attribute, the attribute memory would get wiped. Not any more, however, going forward. SHA-1: 6834957ba9628dd04759788f74c4f85e01690a07 JIT-113965 Lose attribute settings when flash MLK back to pre-MLK Not a fix for this issue exactly, but while investigating, discovered that several encodings are different between the DEC and MLK BIOSes. Need the MLK BIOSes (the follow-on BIOSes) to use the same encodings as the DEC BIOS! SHA-1: 74863a110ab03667c14ff360ed41d93861a47b4c [JIT-115242] Create NVMe Drive LED Control Native ASL Prototype SHA-1: b2c30d34d9c9533a62de2dbd040675a90c7dc19c [JIT-115242] Create NVMe Drive LED Control Native ASL Prototype SHA-1: f2069bd8bf368863991f499b75c87b827657641f [JIT-110222] Advanced Error Capabilities and Control register changing value after being hot plugged SHA-1: d8e191dea8d06c7cc2fc7ebf8bbf5b19ab4832ef [JIT-110222] Advanced Error Capabilities and Control register changing value after being hot plugged SHA-1: a2dfe46fb120e3d07188d7b4a9c7e83d06474eb3 [ESGB-992] Alar/Jalpa. Enable Secure Boot setup item. SHA-1: a2d7172fce8c101b3f2192ce56a2cf91966c9220 [ESGB-1192]provide a method to support user could get bootoption status from SetBootOrderEn/SetBootOrderDis attribute. SHA-1: 7ad655c6767abada0a9f041c28d2f5c2f6352f02 [ESGB-781] Suppress Internal USB port setup item if the board has no internal USB port. SHA-1: e01f899f332747210e3dc0cb4b5295deaba97c42 [ESGB-781] Turn off USB ports according to USB setup items. SHA-1: 91e838217f8a9fb84d15acdd76f2708766434981 [ESGB-1017] FixCORDOBA_BIOS_ENABLE usage SHA-1: 245f972ab80c5927255eaf2747278198ad7c55fe [ESGB-1131] Cordoba: JALPA Backplane static description update config C3 SHA-1: 1d0400da3dded8fabd6b3df186b12e074f0f9aae [ESGB-1131] Cordoba: Alar Backplane static description update SHA-1: 0c9fbaaafbc0c44d008d6ed39ee8839fdc99c210 [ESGB-1108] Implemented original proposal of doubling SPD Warning Threshold method. Remove some code that doesn't need anymore due to new implementation. SHA-1: 2e159bc327ad1e62ee93ffe5452e857131f61ee7 [ESGB-1128] Alar & Jalpa Backplane static descriptions Cordoba: Backplane Config support Alar [C1/C2] Jalpa [C1] SHA-1: 28196bc89fe6b7fe5e53c5ea304cc6ba7a2086a4 [ESISE-432] Tencent BIOS customization - R640/740/740xd/540PM enabled customization's for ESI customer. Added ADDDC Disable option. SHA-1: f372c5ae1cb787d9d624e0e790c6669d8e491f92 [ESGB-781] Add missing header file. SHA-1: 83b3566ecc632ad1529f763418da578ad031edd8 [ESGB-781] Add code to provide a way to disable USB root ports (0-3) behind FCH XHCI0&1. SHA-1: 6376fbec19b4c37a201ca550d50d4c3192ab5cc8 [ESGB-992] Alar/Jalpa. Fix 2DPC issue. CPI - SHA-1: 5d7584b8006d9436397e1be8be91ec32ab9272fe SHA-1: 59cb51a73b7149b5d62aa5592e41820fa7bdf62b [ESGB-1192]provide a method to support user could get bootoption status from SetBootOrderEn/SetBootOrderDis attribute. SHA-1: c6dd17e04103b4bd0d133da00a55f61b635861f2 [JIT-113847] - Fix the wrong register was checked for TOM2 enabled. SHA-1: 872abf052b9fb2eade20712c7067148aa09acfc4 [JIT-111735] (CR)_HPX Code to Match POST PCI Bus Settings [JIT-110222] Advanced Error Capabilities and Control register changing value after being hot plugged SHA-1: ad71da80a89757bd2ec73e8d4ba743b1321cfbb0 [ESGB-1197] Replace static array definition with dynamically-sized buffer. SHA-1: 984cc4ad760d55faed930a4f92dc2fe0891b80b2 [ESGB-1090] Increase the number of MAX. PPI support for the growing various PPI demand. [Note] one PEI_PPI_LIST_POINTERS will take 12 bytes. SHA-1: 5fa9b8536e38a6f4a090e5c243a55374f2be21f3 [ESGB-1001] Clear B_SPI_HOST_ACCESS_ROM_EN bit also to protect specific flash region. SHA-1: 4e9106b862016efe5032e91fa3f47ff266c7241a [JIT-113847] - Reserve HT legacy region of IOMMU to avoid any DMA by IO devices to that area. SHA-1: fe1846dd683414e90cca7007f65a5a42c09650ae [ESGB-800] MEMORY - DELL Memory Interface - Updated DpiMemoryDxe.c and DpiMemoryPeim.c to reflect silk screen for UT boards - Added code to determine of DIMM has successfully trained - Ported the F1/F2 messaging for DIMM training failures - Remove Agesa code that would display to screen DIMM training failures SHA-1: 440a71f968bac7d3ef1d73b38d0e63ad5b915adb [ESGB-1094] Removed ADC references from Platform Descriptions and ModularityCore as ADCs are no longer relevant SHA-1: 3e402a314eb3f57960d5ce4d10bf1a02565922b2 [ESGB-57] HiiBrowser: Fix issues reported by Coverity SHA-1: 833df165abd51582db5796e214c7677a207d7989 ESGB-785 : SPI - BIOS Update Workaround: In order to support A0 and B(X) stepping CPU with same BIOS binary, the access location of SPI ROM should be dynamically updated for the difference of decode region. SHA-1: 3a61f88770fa5ef7dd44942b2032590405a59bed [ESGB-544] Fix issues reported by Coverity - CID 226214 Dereference after null check SHA-1: 2e3d5e8fcbdf1246c0f2343ec5ae0a54e30bcafc [ESGB-57] AMIGuiPkg: Fix issues reported by Coverity SHA-1: 57d61f9f5aec232c2b69fdb8f2c385daad88d786 [ESGB-793] Fix BIOS setup processor's information of core number and level 2 cache size are incorrect for CPU2. SHA-1: 4badff6f306a92ac3575e12b66fbb0f82ddce9bc [ESGB-1001] Set flash linear offset to 0 when the current using flash part is 16MB. SHA-1: cd6bd130636b382b98ee42f58b52a2b48b9dbccf [ESGB-1017] Moved external device description ppi from restricted to generic module package SHA-1: 6bd3701635fe915f1d2b31febee0a8063d646469 [ESGB-1197] Resolve build error for AMD platforms. SHA-1: be2bdce8ee946f798c2996d5c5e54d53f58ce363 [ESGB-1017] Rename platform config flag CORDOBA_ENABLE to CORDOBA_BIOS_ENABLE SHA-1: 87d5d8bff3fb3a4487afe5fa27656e9b02e7491b [ESGB-1197] Add support for change request JIT-113076. This adds the Maximum Memory Capacity field in F2 BIOS Setup (Processor Settings) for each processor socket. This field shows the maximum amount of system memory supported by each populated processor (CPU SKU limit). SHA-1: 61c0239e3d15605367062870d05a7698ac3aac83 [ESGB-1001] Remove the boundary check temporarily to avoid the failure when using SPI emulator. SHA-1: 3188803859cf2d947ada55a72b11decb67a8a732 [ESGB-1001] Fix Coverity issue "The pointed-to memory is accessed with a larger type, causing a crash or incorrect computation.". SHA-1: 20f66919881a09295286b18682c56a36638f3c53 [ESGB-872] CSM - Fix RHEL 7.4 installation failed with legacy BIOS MODE for ROME - System is stuck with the error message "Initramfs unpacking failed: XZ-compressed data is corrupt" - There is the new added E820 entry with ACPI NVS type in ROME starts from 4000000h(64MB). It's reserved for APOB region, but it makes first free memory not enough for Linux installation with legacy mode. ... SHA-1: df4a4f9ca2306c14a1501eab1c49b6a6e47a736a [ESGB-1245] Do not reset SMRAM to UC when CPU driver runs. SHA-1: 9d3bcd16d77a80f0942579e334b00d8e323f572b [ESGB-1005] Correct typo or coding rule volition found by Coverity. SHA-1: 6693acb6e9e40c038c16aa22a08c49385e052d2a ESGB-886 merge RAS code based on Agesa0061RC3 SHA-1: 94f752272852cecc10c67960147e4267d6c28950 [ESGB-779] SETUP - APCB and DellOverlay Change to DellChipsetMemInfoDxe.c to 2933MHz speed to DDR speed table SHA-1: 41b320126e1a95fd33db6d4a24ff04c16eb5ea2c [ESGB-779] SETUP - APCB and DellOverlay SHA-1: e58be290524d89d90bbf7e8f30e9cd8d70132238 [ESGB-1167] Updated 15G cpld lib header to include get planar major/minor type func prototypes SHA-1: 94b86ca3fdf9f7958ac90d1ce059ad0850dd60e0 [ESGB-1167] 15g CPLD planar minor type support - Created register definitions and helper function to access minor type. SHA-1: 2e75f544213b7bf7bfbd283f544686bb2228345e [JIT-113843] add option switch fPerc detection method SHA-1: 98a4edc92606784bb262b971cad8fc52f2b45733 [ESGB-1005] Add boundary check for SPI direct read/write/erase functions. SHA-1: b8e37d5ee9b65bb173f0ff0425b7451d13798b91 [ESGB-872] CSM - Add DellVideoChipsetSupportLib for ROME SHA-1: 2568f17ae0660a28ebba2e0dd7d2708d6d1809f9 JIT-109965 : CPU and FCH reversion settings was wrong in CPM table. Root cause: Mask bit setting is wrong and causes process can't find out the correct CPU reversion. Solution: Correct the PCD setting of ApuSupportMask for SSP support. SHA-1: f0c9bbf2e4e9065fe7896e3d82bb9178620face7 [ESGB-992] Alar/Jalpa. Correct iDRAC device path to fix iDRAC device yellow mark in Windows. SHA-1: 0163f09a4911c784578c39977935c189089abc57 [ESGB-992] Alar/Jalpa. Update DIMM mapping table. SHA-1: 739edfb87cdda25c51a6e17f8822c9316890ebe8 [ESGB-1001] Add SPI speed configuration in debug menu. SHA-1: 4e56debd5b4171a461cd9956151640eedc9a0c66 [ESGB-1019] Show build elapsed time for both main BIOS and recovery BIOS - Cosmetic change only. SHA-1: 3543da03fe9d00dfc72486cda4bd7c5800cace43 [ESGB-1090] SESTO - update SMU to newer 36.31 for internal test only SHA-1: 6118ce91479fa38f15a8ce02f256f83e1a66142a [ESGB-1126] Cordoba: Jalpa Grid minor type changes SHA-1: 01c02ce037f74da65b7d9b5d4aa1044224bf132f [ESGB-1108] Implemented original proposal of doubling SPD Warning Threshold method. Also, changed the doubling period from permanent to one time for next boot. SHA-1: 7ff2b4af49be20c0b0d45f306c0ba697d08d4853 [ESGB-872] CSM - Fix PIRQ routing issues for ROME - Fix translate PIRQ failed if device number is not zero - Correct bus number for PCIe endpoint devices - Add translate PIRQ support(0xBE) for PCIe slots with bridge devices - Update PIRQ routing tables for Alar, Sesto, and Roadster SHA-1: 3d000d8ae1e3aed4f3073ce5591754cfc7718576 ESGB-1043 : BIOS can NOT spew out debug message in SEC/early PEI phase via iDRAC serial. This code change enhances solution [cc0120] and reduce code size for every driver with code size. SHA-1: 23eee83c8fba467ae99445154077523c0a60c6da JIT-114315 [BIOS Build Tool]DllCompare fails to read the .EFI / .EXE file and exit abnormally There's a corner case that the DllCompare Tool reads a section data and judges it as reading failure and exit the app abnormally. Actually, all data has been read. SHA-1: b3560a98ed974a7635e6a09a6b6e399087ef2b3f [ESGB-1028] Refs ticket:1310 Cordoba: increase PEI2 map size to fix compilation error when Cordoba_Enable = TRUE SHA-1: 3b5fe59d8066ba0f9c329929716c424cf8d7a14c [ESGB-1028] Refs ticket:1310 Cordoba: Jalpa Grid Descriptions SHA-1: e201321fa7efef0e116a1a8241933024102889a7 ESGB-554 [WSMT Changes for 14G MLK]: - Enable Check untested memory as invalid communication buffer. - Enable Check UEFI runtime memory with EFI_MEMORY_RO as invalid communication buffer. SHA-1: 39c23c50f966ede9d17b0eaa31e3ac934d8f9d48 JIT-109965 : Increase PEI2 map size to fix compiler defect. SHA-1: a77c3cdc2577b98e7848443dfc38f20f2bcc0120 ESGB-1043 : BIOS can NOT spew out debug message in SEC/early PEI phase via iDRAC serial. Root cause: BIOS doesn't decode port 70/71 and cause BIOS receives incorrect data from CMOS then set incorrect baud rate. Solution: Try to decode port 0x20, 0x21, 0xA0, 0xA1, 0x40 to 0x43, 0x61, 0x70 to 0x73 and 0x92 in SEC phase. SHA-1: da49cf1667f49c5af07139165e2fb44369780165 [ESGB-992] Alar/Jalpa. Enable embedded video in attribute default table. CPI - SHA-1: 02ddb45d5ea2a479a68e6de9c9856599d5ce69b9 SHA-1: 8b2adca2507d1aa2655216bf87606813b53c4e5c [JIT-113843] Title: Add a setup option "fPerc self-describing" under Debug Menu. SHA-1: 9410367368e8f0e38334fdcf3f16f84ed2438da3 [ESGB-1215] Cordoba: Cordoba payload extraction logic in DynamicDeviceDescription ppi. SHA-1: 5f8571481207c2e1054b6e8e76d827616490a412 [ESGB-886] Rome RAS Porting SHA-1: 5ba3122afa0e3ee099bc35e7957643e0094df9ce [ESGB-1102] Agesa 0061 RC3 Change PSP and BIOS directory base address in ROM so that it is within the 3MB space allocated for them in PlatformConfig.txt SHA-1: a2cafcd124e2f34fe1dae9e8eb3a9b556c40208e [ESGB-1102] Agesa 0061 RC3 CppcPopulateApicIdsInPPTable fix SHA-1: 806b707dabe42e0018bcecfe8c53636fb0d9e3c4 [JIT-105866] CR to change the MPS default to 256 bytes on PLX USP, DSP and the corresponding root port. SHA-1: bb0473a489a2ac0ada29aac7795f3d21b2189920 [ESGB-886] Rome RAS Porting SHA-1: f27cc00e83a94b8e0b45cbfc6ba2d2786b54042c [ESGB-1108] Add changes to apply Hynix DIMM workaround. SHA-1: 69669de0a35d05796e17edba4921da654e38be6c [JIT-109965] Modify NVMe didn't show up for AMD project. SHA-1: 9d72669fad5d75cfc0f99f954991db0956af7c01 [JIT-113367] Update SMBIOS type 2 and type 3 for Roadster SHA-1: 1b326a491c9e75486e0c16a18415c658026b4fe9 ESGB-886 RAS code modification based on second review comments part 1 SHA-1: 55cffa87f75098971ef5c17e147f5df2d9498a90 [JIT-112327] R740 will not boot if more than 3 Nvidia T4 cards are installed SR-IOV is disable the Root Port still has ARI Fwd Enable, and this should not be the case SHA-1: 55480c40befd0f17257df5c9d2349cee90a95df7 [ESGB-1040] PCI Host Bridge - Support different AMD CPU generations (Naples, Rome, etc) Add more debug messages. SHA-1: 3657ec2b3fc863102859ba2de226588d437edc93 [ESGB-1040] PCI Host Bridge - Support different AMD CPU generations (Naples, Rome, etc) Add more comment SHA-1: 87c4b14c93f5261ecc860679c61317c6b714ba87 [JIT-110109] Commenting IPMI commands during RAID FV update as it results in platform reset. Since RAID Update util is DELL internal only this trivial solution is utilized. SHA-1: ac3b0e009dcb97a3c168f06cecb908d15d4f63b1 [ESGB-849] ACPI - Platform porting [MADT] Enable CPU#256 for OS SHA-1: 1683b28dad3f9bf41eb9f0eb9f996077a880e584 [JIT-113523] 14G R7425: Enable or disable BIOS LogicalProc setting, OS will always report the same number of threads [JIT-109055] RACADM does not set ProcCores correctly Implement system reset type override for NVRAM attribute changed on Naples & Rome. SHA-1: 05909245fcd14cea22c1376c1d017d478e8cda17 [ESGB-992] Alar/Jalpa. Update PCIE port info table according CPLD Lib update. CPI - SHA-1: b754bb99d5b19c0de04e1bca0790a22dbff6909f SHA-1: 8d6eedf1b4eba9d4574cadcae54f7c124608768d [ESGB-992] Alar/Jalpa. Update DIMM mapping table. CPI - SHA-1: 96f8026799bb53bdb1dd06db2737a68e9cdf6586 SHA-1: 0d707d3d3a02895509e4cbe2a430f78a341ffb38 ESGB-886 override ras code in AgesaModulePkg/ras directory SHA-1: 2fda5b5be6e3598bd16f721c35de807f01e1607a [ESGB-1164, ESGB-1167] Alar & Jalpa 14g CPLD #defs ported to 15g CPLD library - Includes compilation fix for 15g CPLD library SHA-1: 8f8fb0d7022a03964b76e78f0c116b6b2d3392e2 [ESGB-996] Update medsc_arev_switch to take into account the note for the CpuDebugEnable flag when A-Rev flag is set. SHA-1: 5ab473b1deb48e5d774c54fbd6cc4c36e70ead61 [ESGB-1017] Cordoba: Refactored device description and planar description structs Structures renamed to improve clarity and remove unnecessary knowledge of riser segments Riser specific content now has RiserId field. Useful for riser descriptions that only have slimline connections Grid logic updated to refer to new RiserId field PCIe slot 5 description lane count fixed: 8 -> 16 lanes SHA-1: ff8818771efc199fcf938f8cbbc280b6eea6ca24 [ESISE-432] Tencent BIOS customization - R640/740/740xd/540PM enabled customization's for ESI customer. - IOAT DCA attribute excluded SHA-1: bdab70794fe5ff9c47a9e2996ec0369ef54f48c3 [ESGB-1042] Using the same logic to prevent IP from executing the code outside SMRAM. SHA-1: d721c56cb35df512573db281c420dc54bbf633e4 [JIT-109965] Revert back DeviceLocationSsd.c. ------------------------ **************************************************************************** - Version: 0.1.3 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 10/26/2018 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 v0.0.6.1 for Family 17h * PSP Firmware Version: 00.0C.00.35 * SMU Firmware Version: 36.31.0 * DXIO Firmware Version: 36.483 * uCode: 08300006 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. SATA HDD tray 1, 2 of Alar 1U and HDD tray 1, 2, 5, 6 of Jalpa 2U can't detect hdd devices. Please use HDD tray 0, 3 for Alar 1U system, or use HDD tray 0, 3, 4, 7 for Jalpa 2U system. Note: UT planar has fixed this issue. 2. NVMe devices are sometimes lost at AC/DC cycle and warm reset. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update AGESA 0.0.6.1 RC3. 2. Update DIMM mapping table to fix SMBIOS type 17 memory information. 3. Fix CPU core and cache information in BIOS setup menu. (SHA-1: e048c20143b49b98e46378500d4fbfd571d8f6e9) 4. Update PCIE port info table according CPLD Lib update. 5. Update Code Base to version SHA-1: b6c9843cc0f93acf9eabc66af6a19da64885fd9c ------------------------ SHA-1: 34bc4c3959b09b8db3c771b092af9c15dbc23f0c [ESGB-609] - Remove restricted modular definition for ODM build. SHA-1: 76fd02e91493b77d270829efd6aa1fe234c786b6 [JIT-112895] Naples - Inject Multi-bit uncorrectable can not show uncorrect log under iDRAC SHA-1: 89d809e10cbe6694d04fa4ab9684ffff10742b1c [ESGB-994] Added Get/Set SPD IPMI command with MUX segment information for 15G AMD platforms and without MUX segment for 14G platforms. SHA-1: 273016e7b1d41a2291e3b350cf46b5c00c2ef5c7 [ESGB-1102] Agesa 0061 RC3 integration build/boot fix SHA-1: 828387c5936943afe7c55084e2d10290ea8ccfc8 JIT-113760 PSE-5448 - TPM PCR value is changing if Hw is added or removed. SHA-1: 6c6d356eae4b8ad58914d996804b708bcfd11796 [ESGB-1133, ESGB-1124] Cordoba: Alar platform & static riser descriptions bugfixes Planar connection descriptions changed to reflect the actual routing of Alar/Jalpa Static riser descriptions updated to reflect correct lane widths PCIe slot descriptions modified to be described as riser descriptions Static Device Description logic changed to resolve riser/pcie description cohabitation conflicts SHA-1: 5177cfde56ae330f4596a9a1010e59749247bf29 ESGB-1115 : 14G MLK : Add CLX Intel Speed Select feature - Add #define to target specific platforms for this feature. SHA-1: f1bab4ea9d86259a994083b294295d48a7f59c64 [JIT-112300] The PCIe extender card information is incorrect in iDRAC Hardware inventory. SHA-1: b0b0aba8f6c93f6abfae52038f5a787e43a70a95 [ESGB-1133] Alar & Jalpa riser CPLD defines- Static riser description defines in Alar header file updated in name only. Lane corrections not implemented SHA-1: 3f4f107aa93c7875184ee995c781f9bcfe37669b [JIT-112895] Naples - Inject Multi-bit uncorrectable can not show uncorrect log under iDRAC SHA-1: e048c20143b49b98e46378500d4fbfd571d8f6e9 ESGB-886 report number of cpu cores in one package SHA-1: e58ccba2f217e619fbaaec2f01d9ca5d2e6ba5f6 [ESGB-1040] PCI Host Bridge - - Support different AMD CPU generations (Naples, Rome, etc) Revert the workaround in 02ddb45d5ea for Sesto video due to wrong PciRoot device path. SHA-1: cf39bacdaece95b3d45e14190496962094b39ce0 [ESGB-828] Rome RAS Porting SHA-1: c3183eefcb63a9fb182605ac5a61ab83ff7e7082 [ESGB-828] Naples Rome RAS Porting SHA-1: 4bfeca040c6ea0344eb2b48642fb1d6ba66e8615 [ESGB-994] Updated memory mapping tables only with SmbusI2C information. SHA-1: 5e0d9a9e26cbc9a6b8d9d4f7d465735487dfbc9e [ESGB-994] SPD Logging on AMD platforms- Updated memory mapping table with SmbusMux Controller, Smbus Mux Channel, SmbusAddress, smbusDevice information. SHA-1: 1defce688c4c9e9983c8c210cca412e2b1e6adc0 [ESGB-1040] PCI Host Bridge. Correct PciRoot device path. Add more debug messages. SHA-1: 96f8026799bb53bdb1dd06db2737a68e9cdf6586 [ESGB-994] Updated memory mapping tables only with SmbusI2C information. SHA-1: cc0379efe4fb412296ff35659cdf6fa576d64822 [ESGB-828] Rome RAS porting SHA-1: 3a010e4911580709012d06098f31dfff1484e497 [ESGB-828] Rome RAS Porting SHA-1: 6fbe820738b551a1a104a9276cbb4869bff32df7 Fix JIT-113550 : Type 42 SMBIOS Table Contains Bogus String Pool. Allocated 2 extra bytes for the NULL NULL that constitutes an empty string pool. SHA-1: a049eacd633900ca084ea474c4ff77ae430925f0 JIT-112516 [Minotaur _ST_T340] When the BOSS module is used with RAID card HDD(DPN: XXTRP), the Boot Menu will repeat multiple BOSS VD options. - Fix the RSOD when reproducing the issue with debug print level 80000042 SHA-1: 3e25946e54753633e236a250630eca6f3707d99d [ESGB-1102] Agesa 0061 RC3 integration SHA-1: 4c3c159de9fcd0d5877e476c8ab6bb2fd7ffd91e [ESGB-1166] 15g Cpld IO Lib implementation SHA-1: 11e850b94b2c18f0acdc3612866d74769d97ea7b [ESGB-828] Rome RAS Porting - Previous boot error logging support SHA-1: b249671370be1d706679bcbd89638e5090702ff7 [ESGB-1136] ChipsetInitePeim changes to enable Cordoba SHA-1: 049404ff1f9f165dd944a1cce38960a140eb0438 [ESGB-872] CSM - Update PIRQ routing table for ROME Alar SHA-1: 1bf379673281975c168e6b9c50499bb38bf80977, SHA-1: 4be3e83d0e2ce8467875d75fee75f0a241bbdc79, SHA-1: e1fb968a810b6ed81888c3dcbd3f95d2d52e1de9, SHA-1: cb50122e25981429fc05f622cf99abd7109e65ef [ESGB-994] SPD Logging on AMD platforms. - Added SPD IPMI command description. SHA-1: fa33a55fefc58e1af8f6e4752993e717f70c571b [ESGB-872] CSM - Update DellIrqRoutingLib for ROME. SHA-1: 95072df17588aef72f297b54297cae56c2402894 [ESGB-1154] PCI - Reset. Add debug messages to track SMU state machines. SHA-1: cbfb1a387461f62627633d783012e6037a741a73 ESGB-886 ras code change based on review comments SHA-1: 328778109e0e5c7e70074115fcd6e2f946d305d8 [ESGB-992] Alar/Jalpa. Update DIMM mapping table. SHA-1: 9ad51e778bfa3fc0470b1a69349999a09f827eb0 [ESGB-992] Alar/Jalpa. Load NVRAM Attribute and Attribute default service in order. SHA-1: 5fad1cef8a735cc2d52807f13da27b845c035d00 [ESGB-1098] PCIe Bus Allocation CustomizationImplement the core and core chipset support for the feature. The feature is not enabled on any platform by this commit. SHA-1: 60ad3b6d938a7428d3a7c9ed9c01e45f509beb9a [ESGB-1098] PCIe Bus Allocation CustomizationAdd an Attribute and setup option to control the feature. The option is disabled for all platforms by default, and not enabled in this revision. Code Review: Add warning to help text. SHA-1: 9e48418fe6c38ee833b497e9bc1eb8d3628352f8 [JIT-112895] [Surveyor]Inject Multi-bit uncorrectable can not show uncorrect log under iDRAC. Comment out Deferred error logging at time of poison detection until after program upgrades to iDRAC v3.25.25.25 or later (rts+ v3.30.30.30 branches) SHA-1: 7924abe999905189fe9491b58346c674ca034e33 ESGB-1115 : 14G MLK : Add CLX Intel Speed Select feature - Fix TDP reporting for Level1 and Level2. SHA-1: b754bb99d5b19c0de04e1bca0790a22dbff6909f [ESGB-1146] AMD Riser2 discovery CPLD fix. Changed 14g CPLD lib to no longer use the NSOCKETS compiler flag for determining Riser2 type. Riser2 discovery method is now chosen based on current running platform type. SHA-1: 17000b0b1b4f9f1240d2f2070769e222fc7d393f [ESGB-802] Dell PCI Interface Add the workaround for WAFL LOM in 2 P config. SHA-1: 53c23def2a80ed4c9e608f0fe8c207fbf71dbef9 [JIT-110518] - Fixed SHA-1: d9893320a2d12d3249a72b2ea2706ac703f0d921 JIT-110518 changes SHA-1: 35ff2d7aa6cc3dc1446433c9472392156dab4ca3 [ESGB-609] Fix build error if EXTRA_DEBUG is 0 SHA-1: 6ec8960487831d16bd716bf1717a58896b3d4fd5 ESGB-886 separate DellElog code into separate files in SMM mode SHA-1: 187c5ca5ca82cf9dd4d2c99287ee2f2b076b8166 [JIT-112080] (CR) Disabling Cryptographic erase functionality for coldstream devices SHA-1: d66186470e7bf7bb05917e47c4c56da78282bbdc [ESGB-1040] PCI Host Bridge - Support different AMD CPU generations (Naples, Rome, etc) Clean up code SHA-1: afc8692c1281636dd68161e7683263514a893c70 ESGB-1024 Add a "-ShowBuildEnvironment" switch. When this is the first command line parameter to makea or makearun, then nothing is built. Instead, the environment variables and values that would be in effect during a build are written to standard output. SHA-1: f3cc4dada4720cda441d580e16d432ced36f059d [ESGB-809] FCH - GPIO Remove PeiDxeSmmGpioLib in ROME code base. SHA-1: da741210271605a74cbb368f2425dd185b87a2c8 [ESGB-782] Update UEFI SHELL CPLD Flash Tool to support ROME silicons. SHA-1: d74e51a2a4c72016b32a35f1afda317dbda373f4 [ESGB-1120, ESGB-1141] Cordoba: Backplane description field updates- Updated Cordoba Backplane payload ver1 to newest Cordoba spec - Added BayId field for core analyzer to consume - Implemented "always accept static description" feature SHA-1: 63a654dbc0d4f5a70c51c48212188cd8d7325736 [ESGB-115] 14G MLK : Add CLX Intel Speed Select feature modify for AMD build error SHA-1: 23a35a56a7a475ec3d80b7a6991de0691a553e86 JIT-109965 : UEFI0130 will show twice after clear CMOS Root Cause : Legacy IO decode doesn't be activated and enabled so cause solution [4ef977] can't work. Solution : Try to enable IO decode before access CMOS. Set LegacyIoEn bit will activate port 0x20, 0x21, 0xA0, 0xA1, 0x40 to 0x43, 0x61, 0x70 to 0x73 and 0x92. SHA-1: b6239f5349d71ab0e16b06953ac1cdca1acf0a9d [ESGB-115] Isolated INTEL TDP related code from AMD. SHA-1: afc84c9fda670bbf1e5ab801ce93ca10e0e5638a [ESGB-994] SPD Logging on AMD platforms- Added support for Get DIMM SPD Information - IPMI command 0xB8; - Added support for Set DIMM SPD Information ¡V IPMI command 0xB9 - These IPMI commands were leverage from 11G behaviors. SHA-1: a413a03bc3994976a1ca772f8bab8dbea4ffb9c6 [ESGB-1028] Refs ticket:1310 Cordoba backplane description SHA-1: 0229aff4693fd64dcdb757b02a4f598a8cde7ea9 [ESGB-1040] PCI Host Bridge - Support different AMD CPU generations (Naples, Rome, etc) Refactor the code to support multiple generations. SHA-1: a985bd82b13ad20df630450b1977c8e169a48d09 [ESGB-1032][ESGB-872] CSM - Fix system restarts automatically during Linux installation with legacy PXE environment. - [NewFrontier] This issue belongs to Linux legacy PXE loader. (syslinux-6.03 and syslinux-6.04 pre-1) To have better compatibility with legacy OS installation, BIOS need provide only one large and flat available memory without fragments in E820 table. - [ROME] Add 4000 pages of pre-allocated EfiReservedMemoryType to reduce E820 fragments. - [ROME] Update default PreAllocatedMemorySize to 256MB because there is the dependency issue to get MemoryTypeInformation HOB in ROME. SHA-1: 0a632f0b4ef21a7c073c26df21986c9094ff8a84 [ESGB-1118] Add F2 Setup menu to export hashes of device firmware - Replace CreateX509SignatureList with more generic routine CreateSignatureList. Also, Setup menu should offer choice of hash only when user is importing .efi file (not .hsh file). - Support import of .hsh files for SHA-384 and SHA-512 hashes. SHA-1: 930e9b510af9ab7e83ef021387112d49bbf846a7 ESGB-886 Sesto and Roster board boot up with SMT disable by default SHA-1: 3adf7220b16eaa689f585b2682edf1d1d1b46e19 [ESGB-828] Rome porting SHA-1: 0d61ea312f40820a05085148c8534386b0674a5f [ESGB-886] Rome RAS Porting SHA-1: f6a18a58ee9a1642cd0bd3fce15de3f0bd50c168 [ESGB-766] Cordoba: Alar Static Device Description Reimplementation - Infrastructure to support embedded, riser, and backplane descriptions implemented - Backplane support needs to be reviewed as it was copied, with no modifications, from Alar/DpiPci2Common.c - All embedded descriptions previous to this commit will still be passed to the modularity core PPI. - Now only one Riser2 static description accepted if it is plugged in the system. SHA-1: 6ee38248eada3b023c703bb163125f641ab623a1 JIT-111585: Recovery BIOS does not flash BIOS to Primary ROM add a message for system halt when recovery update is done. SHA-1: 9779d05a1d0d900a3bf918993c6bfbda5772c128 JIT-111497: IPS | 14G BIOS | IPMI command to modify bootseq is ALSO modifying HDDSeq (PSE-5464). IPS release-Change BIOS behavior to meet customer requirement, BIOS will not changed BCV list. for below command: ipmitool -I lanplus -H xx.xx.xx.xx -U root -P calvin chassis bootdev disk options=persistent SHA-1: 09e8737259214fa57107f04b5271497809b04350 ESGB-886 comment out CBS configuration, so that bios setup menu can be directly controlled by NVRAM SHA-1: 1f9a605ffbaa576788745c33bc2c6cdcbd6fdcda [JIT-112481] System OS hangs indefinitely on Surprise Removal with BIOS 1.6.4 SHA-1: 448af6aa1eb502f4beb6902379c9c2a23fa91cc5 ESGB-886 Based on RAS code review comments, code change part 2 SHA-1: 26ce7705bd9f72b01881648b18e483be484673ed [ESGB-1028] Refs ticket:1310 Cordoba: (Code Review)DpiPci2 generation from DellModularityCore (No PeiChipsetInit) SHA-1: 4fa0d7c829e861defe55835bb9ce99d37566144f [ESGB-992] Alar/Jalpa. Update PCIE port info table to meet Alar/Jalpa configurations. SHA-1: 7b72f2e7daa9a604234ab3981208c5c38493532b [ESGB-992] Alar/Jalpa. Update USB XHCI controller device number. SHA-1: 954b2b60b4396a4d549ab8999c96eddd68fc032e [ESGB-663] PCI Resource Conflict Resolution Fix Pci Read error. SHA-1: 4a1dd2c09e8b85269fb8c0cbcdf514214f0834b7 [ESGB-663] PCI Resource Conflict Resolution Fix RbIndex to be relative to socket. SHA-1: cecb9c62e38eb4eb59c4ec6c40aceb4be7edeb2a [ESGB-992] - Enabling all devices in Roadster DpiPci2Common.c dynamic table. - Change pDxioPortDescriptor->EngineData.EngineType for NotUsed to equal DxioUnusedEngine - Set default LinkSpeedCapability to DxioGen4 SHA-1: d5c8bf7591f4ee0315e27b585baaa0201e63209a ESGB-886 support SMT disable feature. SHA-1: aea37a3e8b3bdadd8765ca75bba4a8785e55e8df JIT-110226: BIOS Recovery should not ask user to restore service tag SHA-1: 964b0ad25e3c0b7389e5eb9cbb2d460a6d365a64 [ESGB-886] Naples/Rome porting - Remove unsuccessful library singleton code/fix Intel platform bug with PCI error logging SHA-1: 2c64d85f9d946e229f49d0b1c39476f28e7d0d35 [ESGB-872] [ROME] CSM - Support USB keyboard in legacy mode - [Sesto] Validate USB keyboard works during BIOS POST - [Sesto] Validate USB keyboard works in DOS - [Sesto] Validate hot-plug of USB keyboard works in DOS SHA-1: 7c911d7ef7348726985f9bd49739d1fcac4ade2b [ESGB-648] Dual FLASH part Design. - Add SwitchRom (chip-select) function. - Debug message for different phases. SHA-1: 8f9af02b6eebfc35f8bc76cd339e5563c8150c46, SHA-1: 40af185c5305b5274fbc48e644ab25093fd2553c [ESGB-828] HSTI Related Changes SHA-1: a3f1340ce2c39d436f697822ef461482698c5d09 [ESGB-587] ApachePassHii and ApachePassDriver, Fixed AMD Build. SHA-1: e837d7ab366afaa24def315f653dfedc86081bd3 [ESISE-463] Verizon - 14G - Request for BIOS change to support "home snoop without directory"- PM enabled feature to add Directory Mode to Processor setup menu ------------------------ **************************************************************************** - Version: 0.1.2 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 10/05/2018 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA 0.6.0 for Family 17h * PSP Firmware Version: 00.0C.00.20 * SMU Firmware Version: 36.29 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. SATA HDD tray 1, 2 of Alar 1U and HDD tray 1, 2, 5, 6 of Jalpa 2U can't detect hdd devices. Please use HDD tray 0, 3 for Alar 1U system, or use HDD tray 0, 3, 4, 7 for Jalpa 2U system. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update PCIE port info table to meet Alar/Jalpa configurations. 2. Add max to wait 2 minutes for checking BP INVENTORY COMPLETE. 3. Fix RSOD at NVME supported configuration. 4. Correct SATA table to fix ST1 SATA port information didn't display in setup. 5. Correct USB XHCI controller device number. 6. Correct USB Hub reset register offset. 7. SPI speed change to 33Mhz from 16Mhz. 8. Update SMU 36.29 and set ARI Off. 9. Update Code Base to version SHA-1: 61b233ececd1970cfc9dbba08d6898357a76017c ------------------------ SHA-1: 6691d9ca99dec381581b1b97d260cdbaa9d5ef02 [JIT-111330] System will halt after setup Secure Boot mode as "Audit Mode" in BIOS. Once EDK2 opensource fix this issue, we will apply the solution from EDK2. SHA-1: 0dbd58ba79ae95e8dbe8b23536b9d773ef88c928 [ESGB-663] PCI Resource Conflict Resolution Fix problem with shadowing OROM caused by 8f8827. Still have problem with ProcessingOrom SHA-1: e1e2e083455704434d79ba066e358f8750685d7d [JIT-107396] Change IP6 policy default back to auto, so that during iSCSI boot, DHCP6 SARR process can be initialized. This is NOT a proper fix for the issue; this is to match shipping BIOS behavior. SHA-1: d2708fd3d3086630960bcf43e4b020ef5e77935b ESGB-886 Based on Dave's RAS spread sheet, change part 1, give more detailed debug information SHA-1: a3306b400915d1fd11b6f19b83a3c44d8d171595 [ESGB-648] Dual FLASH part Design. - Add DellSpiFvbServicesWrapperPei to dual ROM Arch. supported platform. - Remove unnecessary dependencies added in DpiPlatformIdPei.inf. - Adjust the PEIM loading sequence. SHA-1: ca55c850f32e6c28fce992c8717d8caa807a90cf ESGB-1115 : 14G MLK : Add CLX Intel Speed Select feature - Fix DellAlarPkg Build with previous check in. SHA-1: d8b779bc8144e6ecf60da060ff858dfe8c010eb0 [ESGB-1113] Initial PciChipsetInitPeim for Cordoba feature in Laguna Seca Project - Fix build issue SHA-1: 119c76320c4328778ff9c864b36ec71c2f525455 [ESGB-802] Set basic configuration to DXIO for Alar/Jalpa boards to enable P-Links, G-Links and WAFL. SHA-1: 8f88276c56c8920fe0346a35945b058f091e646d [ESGB-663] PCI Resource Conflict Resolution Verify with ATI and Nvidia P2000 on Jalpa. SHA-1: dc25e28a10a0db7a32d7279bf35c919092907cc8 [ESGB-1090] SESTO - merge from ALAR "SHA-1: f473b3a7ee" for NBIO device identify. SHA-1: e9e395e597a181165c0a7bc8b4ed99bbd91ac45a [ESGB-1090] SESTO - 1) disable ARI, 2) code clean up. SHA-1: f473b3a7ee328c275bc6a04544356fef4da8cfb8 [ESGB-992] Alar/Jalpa. Fix RSOD at NVME supported configuration. SHA-1: 40329f9a6c1f173d7fbdbc2c51d45d52a3b9b31e [ESGB-992] Alar/Jalpa. Corrected USB Hub reset register offset. SHA-1: 71867930b17f5c3ff5033cbf16fc26ddb93bf4c4 [ESGB-992] Alar/Jalpa. Change SPI speed to 33Mhz from 16Mhz. SHA-1: 0f17b5e3e66770d6cdccb19fe804d495a3898b2e [ESGB-992] Alar/Jalpa. Update SATA table to fix ST1 SATA port information didn't display in setup. SHA-1: 2c0ff26817fd718114b8ab191bf9a1b25a6657da [ESGB-992] Alar/Jalpa. Max to wait 2 minutes for checking BP INVENTORY COMPLETE. SHA-1: 6e7809a16a9163d2fcfbd3878f1f9aa33a6ecde3 [ESGB-992] Alar/Jalpa ARI off. CPI - SHA-1: 16def83ff91aef535db232b8e23aeae17275a65e SHA-1: 16def83ff91aef535db232b8e23aeae17275a65e [ESGB-1102] SMU 36.29, Roadster ARI Off, and update to DpiPci2/DpiPci2Common.c for Roadster 2 Socket config SHA-1: d04238752f51037cbfc63ed707cebc7385cb0c2c [ESGB-886] Rome RAS porting: Move Naples Dell RAS code to separate file for portability SHA-1: 4946b45b03087b3a88d5152760ef436f2bc9be45 [ESGB-544] Support iDRAC IPv4 and IPv6 addresses in POST screen.[ESGB-544] Support iDRAC IPv4 and IPv6 addresses in POST screen. - Check the Null pointer to be safer. SHA-1: 4e60a08c4f4f65c60af03006cecf7c83540e5806 [ESGB-886] add FchALink RAS support SHA-1: 68e0ae633f5347556cf8cc3b9c3c65f4566b4eaa [ESGB-1095] Cordoba: Alar chassis grid implementation - Implemented core algorithms for mapping external devices to their corresponding slot on a platform's chassis grid. This algorithm is generic and can handle grids from different platforms. - Described Alar grid and its slot mapping attributes for risers. SHA-1: 9f940406ddee7b0fa58bdeb23cead8acaafc5c49 [ESGB-886] Rome RAS porting: Move Naples Dell RAS code to separate file for portability SHA-1: b5610852215d4d0136d978ad43f5a3e6258fe2de [ESGB-1090] USB port disablement porting for Sesto & Reventon platform. SHA-1: a9d6f34676ed6eecf3316ee3f9e62141fe49498f [ESGB-1090] Enable USB ports behind integrated USB 2.0 HUB (microchip 2514) SHA-1: 8c5a378a9142e3ea79c315672ae6fd129da674ec [ESGB-886] fix build issue when RAS_SUPPORT enabled, and change ApeiMcBankStrucInitData in DellApeiChipsetHooksLibDxe.c SHA-1: da3ab0ae66825e5fbd0324e4b7666a767be3c250 [ESGB-1113] Initial PciChipsetInitPeim for Cordoba feature in Laguna Seca Project SHA-1: fc4fb0fe64c27e202f5b0099eb67bd03b9e0b45c [JIT-100293] [JIT-99513] [JIT-99673] When UNRECOVERED READ ERROR sense data is returned, set media as absent and non-removable to reduce the read attempt. SHA-1: 4334d9a12932aaa8147708f89bfa3e25c8f2e248 [ESGB-886] support USB ras error dell log SHA-1: 82918db4d9dc10b81c436bb6263f1ed27ab516ea [ESGB-886] Check in unmodified AMD RomePI-SP3_0.0.6.0_RC3 PlatformRas Directory SHA-1: b651ff4766801ea9b51063e98738b174a33f5869 [ESGB-828] HSTI Enabling: Naples Regression Testing fixes SHA-1: d9e47b97d6cd36bee34db3181f6db882451807c7 [ESGB-828] HSTI Enabling: Naples Regression Testing fixes SHA-1: 4a9465a3105c0280e3f161950074c863c62603c6 [ESGB-828] HSTI Enabling: Naples Regression Testing fixes SHA-1: fecf78f343f67ec5007cd2f28507a29f63173fb7 [ESGB-828] HSTI Enabling: Naples Regression Testing fixes SHA-1: cacf13ac67f4fa4d2dedbedaaf7e87f61b8de359 [ESGB-828] HSTI Enabling: Naples Regression Testing fixes SHA-1: eb91c0d73b1370ebd16e48694842abafd6a1fcec [ESGB-828] HSTI Enabling: Naples Regression Testing fixes SHA-1: 53fc02fcfbab4cceed79cd902a30d6112f340353 [ESGB-1108] Fix Read on old Hynix Dimms failing SHA-1: a0c88218d32269ba8329611ad95895772570d1e2 [JIT-111689] Possible dereference of NULL pointer in DellHiiSetupUefiVars.c Add check for NULL pointer before dereferencing it. This code path may be needed in the case where boot option variables (BootXXXX) are unexpectedly missing. SHA-1: 0b744fd87139b4e0f404e9dbfda116068cf46dd1 [ESGB-1109] Using EFI_RNG_PROTOCOL to generate random PlatformAuth value for TPM2.0. Remove the usage of RandomSeed from OpenSsl can avoid unnecessary OpenSSl symbols be included and reduce much code size. (~400k) SHA-1: a5d635114eb9867df348ad4776e680816ef2b2ba [ESGB-1109] Add RngDxe driver to produce EFI_RNG_PROTOCOL. SHA-1: cba414cfeb3ab88a30e04ae29f3ee5d9fe53df1b [ESGB-1109] Enable RngDxe driver to support HW random number generator. SHA-1: dc60c0f34e7da005fda965637fff2858127fda5a [ESGB-1109] Enable RdRand support. SHA-1: a08c3d32da9621a464d547a4f56ebfa1164a777e [ESGB-1028] Cordoba: Debug Prints BacKplane/Floating Devices SHA-1: 2bfd432135c5d7700b84128f60cb1406d4354275 [ESGB-1102] Agesa 0060 RC3 integration for Roadster APCB SHA-1: a68c82f738ecc5c9d6ec3cd21c24b8b05bbb500b [ESGB-1108] Add fix to Correctable Error Counts. Also did some code cleanup. SHA-1: 3dda94b0a3a9d5cdde8c5bdedf269be434711497 [ESGB-541] [SCP] Move SCP processing before ConnectAll() SHA-1: dbd4ef93f023e6fe50c8f2180d0665ea006af00d [ESGB-1005] Add MX25U3235F (1.8v) flash part for dual ROM system. SHA-1: e11236409c86fff8d53179a8c6a4166ff451da3d [ESGB-841] FCH-USB Symptom: RSOD during POST after set "All Ports Off" or "All Ports Off (Dynamic)" RootCause: NULL function pointer called because function FpUsbPortDisable2 did not implement in RomePI. Solution: Comment out function FpUsbPortDisable2 before RomePI support. Functional review was required after new RomePI implement this function. SHA-1: 6a263caccf774eab0fa32a4e2f7efe3848345b6f [ESGB-849] ACPI - Platform porting Symptom: Found ACPI error "ACPI Error: [A014] Namespace lookup failure, AE_ALREADY_EXISTS" RootCuase: ACPI naming conflict between AMD ALIB and APIC. Solution: Remove AMD ALIB because it never been called in our ACPI design. SHA-1: bd866748ec2c2af3835512762faf558dc2d3a984 [ESGB-996] Isolate non-referenced local variables for AMD platform to avoid build error. SHA-1: d6c4184832b07091b312c2dd2195b50b63a15efc [ESGB-996] fix build error on ALAR SHA-1: 99fd2801f03ded0659deabce50d85e2ae75361d9 [ESGB-1090] fix build fail caused by SHA-1: a0675fa1 SHA-1: 9c874637e1018b780ece37619cd5cc12b8d566a7 Fix JIT-111296 Extended BIOS ROM size is not correct Fill in the extended BIOS ROM size in SMBIOS table type 0 when appropriate. SHA-1: 70d1e7e75ddb3146b0b20a185f35fee660a3717b [ESGB-1109] Reduce code size due to implicitly BaseCryptLib library linked. Function DellBdsLockCpld (DellCpldFirmwareManagementProtocolLib) and GetSecureBootPolicyCrc (DellSecurityLib) are called ONLY by DellBdsDxe driver so move them out of the libraries and remove the linked libraries from DellBdsDxe driver. It reduces ~250K for the final generated .efi binary. ------------------------ **************************************************************************** - Version: 0.1.1 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 09/21/2018 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA 0.6.0 RC3 for Family 17h * PSP Firmware Version: 00.0C.00.20 * SMU Firmware Version: 36.19.v36.465 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. The mini-PERC UEFI driver will not be loaded and the function failed. 2. Riser 1B slot 2 for Jalpa 2U system is disabled, because the system will hang at POST when enabled. 3. SLIMLINE_3 was dedicated for SATA function. 4. SATA HDD tray 1, 2 of Alar 1U and HDD tray 1, 2, 5, 6 of Jalpa 2U can't detect hdd devices. Please use HDD tray 0, 3 for Alar 1U system, or use HDD tray 0, 3, 4, 7 for Jalpa 2U system. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Enable SLIMLINE_1/ SLIMLINE_2/ SLIMLINE_4/ SLIMLINE_5 /SLIMLINE_6 ports. 2. Support FVS mode. - Skip F1/F2 when power on - Boot from EFI default - Force SLIMLINE_1/ SLIMLINE_2/ SLIMLINE_4/ SLIMLINE_5 /SLIMLINE_6 to PCIe x8 port and /SLIMLINE_3 to 8x SATA ports 3. Update ACPI to fix VGA yellow bang in Windows 2016. 4. Fix UEFI0130 is always showed at every boot when configure another processor, because some RTC registers are incorrect should be corrected. 5. Enable PCIe Gen4 capability support. 6. Update Code Base to version SHA-1: 8b4faf4b080987b81ed72128a0ec7071c0503b93. ------------------------ SHA-1: 8b4faf4b080987b81ed72128a0ec7071c0503b93 [ESGB-1028] Refs ticket:1310 Cordoba: Riser detection segmentation updates SHA-1: 70d1e7e75ddb3146b0b20a185f35fee660a3717b [ESGB-1109] Reduce code size due to implicitly BaseCryptLib library linked. Function DellBdsLockCpld (DellCpldFirmwareManagementProtocolLib) and GetSecureBootPolicyCrc (DellSecurityLib) are called ONLY by DellBdsDxe driver so move them out of the libraries and remove the linked libraries from DellBdsDxe driver. It reduces ~250K for the final generated .efi binary. SHA-1: dca4c3d9f76c2d6fe2c95e3b9d6e44f1d1869cda ESGB-886 put platform ras feature into Dell override directory SHA-1: 7c333ef86bf28f2e1990304110649fe5f0c6a354 [ESGB-1108] Merge Spd Branch Changes to Trunk SHA-1: f9568f490cc73cf775f247249529c6dd75e7509a ESGB-886 fix MCTP bugin Intel platform. Reverse back to the old GetPfaFromPciId() function for Intel platform and create GetPciPortPfaFromConnectedDevId () for AMD platform. SHA-1: eaaaa8a5a272b99ecf8d7d71cdbbd65a037dc977 [ESGB-828] HSTI Enabling: Naples Regression Testing fixes SHA-1: c23b32e0b01515c57f34406929bc0871cdc944bb [ESGB-876] fix to have idrac protocol load when RAS_SUPPORT is disabled Surveyor and Kepler build fix SHA-1: f1d815154bb6cbf8bb63675ab17ca35c75d2ce47 [ESGB-1037]: PCI Host Bridge - Porting for Rome Add die, ccd, core, thread to SmuV11LaunchThread() function. Merge branch 'master' of ssh://gtie-bitbucket.us.dell.com/esgbios/leo SHA-1: d8b69cb3d1cef0fbef8f7576d55cd4956dc32078 [ESGB-1037]: PCI Host Bridge - Porting for Rome Add die, ccd, core, thread to SmuV11LaunchThread SHA-1: eca9a1498a2fb7a98d4123b80467fbfbd6ab73f4 [ESGB-849] ACPI - Platform porting Move ACPI iDrac and legacy VGA resource to PC03 (NBIO0) for all Rome projects. SHA-1: 60f386c37378ba28aeedb4f24231c8f4b12a4a84 [ESGB-992] update ACPI to fix VGA yellow bang in Windows 2016. SHA-1: fd934358ad42abb66a4dd5e3c524eed17dd09771 Merge branch 'master' of ssh://gtie-bitbucket.us.dell.com/esgbios/leo SHA-1: 7468f0d50714dce82605e531c2460cf472fb9db4 [ESGB-876] fix to have idrac protocol load when RAS_SUPPORT is disabled SHA-1: 6f962b6eb66aca5357c66fe76cec59b0c782a2c2 [JIT-110930] UDF file partitions are not showing up correctly when using EDK2 drivers. The files inside the partition is not visible in the UEFI shell and BIOS update explorer. Use Dell CDFS and UDF drivers in conjunction with EDK2. SHA-1: 7468f0d50714dce82605e531c2460cf472fb9db4 [ESGB-876] fix to have idrac protocol load when RAS_SUPPORT is disabled SHA-1: cbeed2a4977a7f8432f5cb58782f015f619fa0e3 [ESGB-1102] Agesa 0060 RC3 integration for Alar SHA-1: 49fa077e5e953fbd520ea85aa5b45912184ef977 JIT-109965 : UEFI0130 is always showed at every boot when configure another processor, because some RTC registers are incorrect should be corrected. 1. Implement CMOS checksum feature and error handling. 2. When Nvram clean jumper is installed or checksum has error, try to do CMOS clear and recalculate checksum. 3. When checksum has error, BIOS reports "UEFI0069" via set bit 6 in CMOS register E. 4. When CMOS lost power, alarm register will become invalid value. Implement a mechanism to detect and reset alarm registers at every boot. (Although current design doesn't have a clear detection for CMOS power lost, but system still needs to clear invalid CMOS data.) SHA-1: 348fc08990969a30a654e212eac474cc462542d0 [ESGB-992] Alar/Jalpa BIOS development for Rome ES1 Bring-up. Reduce used heap size about 0x4200 bytes SHA-1: d5d5dcb0380861412eb8102cffd151e7d359e344 [ESGB-992] Add MX25U25645G flash part information. SHA-1: e42e03228f564213065ae671cdd162dd7bed9b9f [ESGB-992] Alar/Jalpa BIOS development for Rome ES1 Bring-up. Reduce used heap size about 0x4200 bytes SHA-1: f14c82b0a7fba45d27ed4047a686eb6298a9d741 [ESGB-992] Alar/Jalpa BIOS development for Rome ES1 Bring-up. Reduce used heap size about 0x2700 bytes SHA-1: a264e83ab536fc2192208f290951d865006f30de [ESGB-1028] Refs ticket:1310 Cordoba: Alar PlatformDescription typo fix SHA-1: 5e0b74aead62b6152c6ba57f458d799776737e57 [ESGB-1028] Refs ticket:1310 Cordoba: DellModularityCore clean up SHA-1: a91caa961013b946a4d5780be423359beebb17a5 Merge branch 'master' of ssh://gtie-bitbucket.us.dell.com/esgbios/leo SHA-1: e606b201e2b0051bd5933cd8df6bbfe437d0116c [ESGB-544] Support iDRAC IPv4 and IPv6 addresses in POST screen. - Fix Some string do not show while entering LC SHA-1: 45f90e61439bd10bdd62abbbfa52b3067cb88053 [ESGB-1028] Refs ticket:1310 Cordoba: Alar fix apriory ppi dispatch order SHA-1: 4c687e32842920871e8924861b9c977b52e41a31 Merge branch 'master' of https://gtie-bitbucket.us.dell.com/scm/esgbios/leo SHA-1: ff6d49d4de638a974845f1dd7425c94eb328fe90 [ESGB-828] Support HSTI Rollout > Naples regression testing code changes and bug fixes SHA-1: ae15d2b7d815e9b1cdc0d42641f52c3227ba9eec [ESGB-1090] SESTO - add missing file and restore files which committed incorrectly. SHA-1: da995962bcf04000999b95cd9ecf19ed5d487a6a [ESGB-1090] merge SESTO BU change back to master SHA-1: 362567f342dc045e53c1fe3b225a8031d2bea53c [ESGB-1028] Refs ticket:1310 Cordoba: Alar embedded devices descriptors SHA-1: 0fd14af549fcd805181a3f325b2270049a430a31 [ESGB-1017] Cordoba: ASSERT contexts are now error handled for ExternalDeviceDescription.c SHA-1: 10a36d2a48e4c866b45e92a42d99bd2c94ae45ca [ESGB-1028] Cordoba: Fixed uint to unicode string logic in Core Analyzer SHA-1: 1249829753a1e97379c7a2a449bf96f5fc08ad6d [JIT-109965] Boot Roadster with AGESA 0060 1. System assert due to ran out of stack before system memory ready Increase stack size from 256KB to 1MB for all Rome projects. 2. System hang during DXIO initial Add CPU2 P1 PCIE Slot 2 entry to avoid DXIO hang. 3. System assert due to SPI access fail Remove incorrect PCD PcdFlashLinearOffset setting for Roadster. SHA-1: feec7ccd2064e20f4dd4301fc4b30441be448a3b [ESGB-1105] iDRAC-HII RTS+ X02 (SWB# 2H6H5 X02) into the latest 14G BIOS Releases. The changes include defect fixes for, JIT-107639 - L10N: I18N: 14G LC v3.30.30: Strings not localized under iDRAC Settings JIT-111134 - iDRAC-HII : CSSD 6.0 BLD 0048 Integration Kindly inform us the BIOS release to which this patch will be integrated. Note: 1.These changes are for all platforms push binary to all platforms 2.iDRAC Settings Version is 3.00.00.35 SHA-1: c47bc6f785f4e7be6fe49ca830b387fc3aaee96a [ESGB-992] Remove Wnbond_W25Q256 entries to avoid programming QE BIT. SHA-1: 5d1a249f9febfa56b624a62c2c43184338c7d9a8 JIT-109965 : Check-in Roadster bring up code into master. SHA-1: 3a97e866ca973be8e472b9fabf3fc81df627103a ESGB-886 fix the build issue when RAS enabled based on AGESA 0.0.6.0RC2 SHA-1: e66cb0b08e2316c02b4627738b7b38fc24cf5d5e [ESGB-1028] Refs ticket:1310 Cordoba: Alar Cordoba code porting for development SHA-1: 01d9aac792caac25c98d7bf4dd8fa4c3f3c957ac [ESGB-1017] Fixed missing cordoba pei dependency compilations for Alar SHA-1: a2bc510e6cce9255aaac257ebad4c8c6c6ac9d7b [ESGB-1037]: PCI Host Bridge - Porting for Rome Remove PciHostBridgeSsp. Have not tested with Naples yet. SHA-1: f5f234a04606f5b4e745eea9502198d016fa7f76 [ESGB-1005] Replace memory direct read by SPI read command. SHA-1: 70e9106549f5f4bd26fd6e4c7df54f6fc14554da [ESGB-57] HiiBrowser: Fixed that expression statement cannot get current value for password field with interactive flag set (cont.) - Clear the password content after the handshake - Do not apply the change to non-interactive password SHA-1: 91e50abbb71a173169357f698f19843245a80eb6 JIT-110622 [Spitzer-SIT]-BIOS:System password and setup password still show as "*" then clear system password and setup password use "delete" key. SHA-1: d9e94c6113ca1dc3a0d4fd359806b229c2f311f6 [ESGB-1037]: PCI Host Bridge - Porting for Rome Use PciHostBridgeDxe instead of PciHostBridgeSsp. Have not tested with Naples yet. SHA-1: 8c0bd8d2ddaa30b57b5f09258f80bc616dca58e6 ESGB-886 fix one issue of DellPreviousBootErrorDxe.inf SHA-1: 70ea23e7b3281ccd0bdff4d6d466aab8119ea739 ESGB-886 ras previous error log part II SHA-1: fba1d798f568559a54cbc03fdbff8f23cfa362cf [ESGB-992] Alar/Jalpa BIOS development for Rome ES1 Bring-up. 1. Implement DIP 6 function and console redirection and AGESA serial message can be printed out via iDrac serial 2. Implement the Serial Debug Output (for AGESA) function which can be activated in debug menu option "MRC Serial Debug Output" SHA-1: 7a3c9ae8d603894aa750ffe24152f198d44b77b8 [ESGB-57] HiiBrowser: Fixed that expression statement cannot get current value for password field with interactive flag set SHA-1: b57588193b9fbb22711506577d3d11cacee0ba98 [ESGB-849] ACPI - Platform porting 1. Implement ACPI DSDT PciTree for Rome 2 sockets projects 2. Fix Rome USB hotplug issue 3. Add Rome WAFL support 4. Bugfix for PIC mode routing 5. Move ACPI legacy resource to PC00 (NBIO3) SHA-1: 260f6d6cc6aa8a811e26ccc2167a9a19be94f2d6 [ESGB-674] ACPI Development 1. Support up to 256 threads on Rome 2. Fix AGESA coding error for run-time CPU SSDT generation 3. Implement ACPI X2APIC for all Rome projects 4. Bugfix for 2 sockets IOAPICs Validation: [2 x 32 Cores = 128 Threads] Boot Windows 2016 [2 x 64 Cores = 256 Threads] Boot Ubuntu 18.04 Note: Threads above 255 were disabled due to known defect, will enable it after function ready. SHA-1: cd5c963fdbd1c12b27573f02f215a09de331a8c6 ESGB-1043 Set AGESA debug print to iDrac serial port for ROME projects. SHA-1: 7628a25d88e5621586cb174678154a67fd83469b Merge branch 'master' of ssh://gtie-bitbucket.us.dell.com/esgbios/leo SHA-1: 1d30ecc27069af9dfea789e5b72905f4d2af851b [ESGB-1102] Agesa 0060 RC2 integration based on Alar SHA-1: 001e3f97cc694141ec06b6e5c53df1caf92e7560 [ESGB-1028] Update Chipset Descriptor Values to reflect the current topology for Rome CPU SHA-1: 527ae39311b7465fe0078267d754d0cef66c9bef ESGB-886 use dell ras log to replace amd's ras log part 1 SHA-1: 634a6355dd9daea635c8e08eaff9c3e2e163d3f3 [ESGB-828] Support HSTI Rollout Various unit testing bug fixes for WHEA logging SHA-1: d3da0731a9764ca5921e9e3e72d93f7a6223a17c [ESGB-828] Support HSTI Rollout SHA-1: 2b4ea00c21068b78fe6cfe6841913995015eb731 [ESGB-828] Support HSTI Rollout Resolve ASSERT during runtime error handling SHA-1: 89a5abc3aea1f583b966b4a171d2f0b1bb2197c8 [ESGB-828] Support HSTI Rollout SHA-1: 4b4017974a3529d22dad6f2b86d454fb508f1685 [ESGB-1028] Refs ticket:1310 Cordoba: Alar cordoba code porting for development, all code control via DEFINE CORDOBA_ENABLE = FALSE // Default value SHA-1: ec5debf286efcd62066ec11459e4b213b4a9db91 [ESGB-992] Alar/Jalpa BIOS development for Rome ES1 Bring-up. - update PCIE port info table to enable G0, P1, G2, P3 and WAFL links - version 0.1.0 SHA-1: 23ee640df3e865428e391dd4eaf0c3979e93baa7 [ESGB-1032] Revert recent HSTI enabling check-ins This reverts commit e210d8b22f60cc5316dc34794bc7eb9778423d05. SHA-1: 7ab7e7a4201f3a21a2d2a303536c7886bd4f4eda [ESGB-992] Make PlatformInit PEIM be loaded as early as possible SHA-1: 296bc7d16056a31218d64d829c406ef3f554a28e [ESGB-992] Alar/Jalpa BIOS development for Rome ES1 Bring-up. Symptom: BIOS can detect HDD but no HDD informaiton in SATA page of setup menu. Root Cause: Incorrect path definitions for port map and SATA controller. Solution: Corret the pahts of port map and controller path. AHCI Controller 0: [Bus 0x42|Dev 0x00|Func 0x00], device path : PciRoot(0x1)/Pci(0x8,0x2), HDD was detected. AHCI Controller 1: [Bus 0x43|Dev 0x00|Func 0x00], device path : PciRoot(0x1)/Pci(0x8,0x3), No HDD AHCI Controller 2: [Bus 0x83|Dev 0x00|Func 0x00], device path : PciRoot(0x2)/Pci(0x8,0x2), HDD was detected. AHCI Controller 3: [Bus 0x84|Dev 0x00|Func 0x00], device path : PciRoot(0x2)/Pci(0x8,0x3), No HDD SHA-1: ed6ead564e830bd4eba090adc5e06aa046ffc119 [ESGB-544] Support iDRAC IPv4 and IPv6 addresses in POST screen. SHA-1: 30998988b30841acf1afbdb9df09866963a40dee [ESGB-1001] Add function to read read-only 64-bits unique id SHA-1: b297ff6460f7202b67fe3e9c2233d31e34d8f641 [ESGB-828] Resolve Alar build errors SHA-1: ecc7ae12798d04ace9490007b110d33751ba2097 ESGB-886 add code to support SATA RAS Feature/DpiCpuDxe/DpiCpuDxe.c SHA-1: e210d8b22f60cc5316dc34794bc7eb9778423d05 [ESGB-1032] HSTI enabling SHA-1: 1df95099d257ed0681ba78dbef4938c96bb77d53 [ESGB-1032] Merge changes from stg/NewFrontier branch for HSTI enabling SHA-1: f8cd51a2de1a1ac68033a8b673645b085f06f009 [ESGB-1005] Issue SMI when reading SPI. !!todo:SPI read should be through SPI command instead of using MMIO!! SHA-1: 1573f7939af086f5f76cb0a7c29d3ac6566ef0d6 [ESGB-828] AMD Naples/Rome RAS porting SHA-1: b8a629e87f8fe741e9a6eb103c118d4f1925ca7d ESGB-866 fix the Alar platform build issue when RAS enabled. SHA-1: bece517ba3998e22d841275ff1d2bef6ddf1dd42 [ESGB-1095] Alar & Jalpa Platform Descriptions - Created platform description for Alar and Jalpa. - Currently not compiled or linked in the Alar platform package. - Physical grid not implemented SHA-1: 2418dc9efcfffa67ec079fcc3717ce61055c8431 [ESGB-1082] Show UEFI0074 (message that Secure Boot policy has changed) only if the current boot mode is UEFI boot mode. SHA-1: d783c772d6843ef2f81118c6ede713f913bcfa94 ESGB-866 add code for SataRasSmi part one SHA-1: bd623cad86a6da81744c85769927e43db0e9bc46 ESGB-866 add code for pcie error log SHA-1: d589e3edae145a555212e85801c28c174538e444 [ESGB-828] AMD Rome/Naples RAS porting SHA-1: 037a982a5127567d73cd2332472c35a413ba51d5 [ESGB-828] AMD Naples/Rome RAS porting SHA-1: 5105aac795366ef7d9beb7541066d2444aaeef85 [ESGB-828] AMD Naples/Rome RAS porting ------------------------ **************************************************************************** - Version: 0.1.0 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 09/07/2018 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 v0.0.5.2 for Family 17h * PSP Firmware Version: 00.0C.00.20 * SMU Firmware Version: 36.19.v36.465 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. 2. 91.0.0, 0.1.0 and newer versions are for Rome ES1 CPU test. 3. Update BIOS revision 91.0.0, 0.1.0 and newer versions from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. The mini-PERC UEFI driver will not be loaded and the function failed. 2. Riser 1B slot 2 for Jalpa 2U system were disabled, because the system will hang at POST when enabled. 3. SLIMLINE_1/ SLIMLINE_2/ SLIMLINSLIMLINE_4/ SLIMLINE_5/SLIMLINE_6 were disabled, because the system will hang at POST when enabled. (RSOD) 4. SLIMLINE_3 was dedicated for SATA function. 5. SATA HDD tray 1, 2 of Alar 1U and HDD tray 1, 2, 5, 6 of Jalpa 2U can't detect hdd devices. Please use HDD tray 0, 3 for Alar 1U system, or use HDD tray 0, 3, 4, 7 for Jalpa 2U system. 6. Some error massage displayed: UEFI0130, UEFI0324 and UEFI0074. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Update SMU to version 36.19.v36.465. 2. Enable OCP Port (G2 link x8). 3. Enable Riser 1A slot2 and Riser 1B slot3 (G0 link x16). Note that the Riser 1B slot2 is not enabled. 4. Enable LOM device (WAFL0 link x1). 5. Fix SATA HDD devices didn't show in BIOS setup menu. (SHA-1: 296bc7d16056a31218d64d829c406ef3f554a28e) 6. Update Code Base to version SHA-1: 2330607f6ff996e8bbaa2c9abd19aeac616c2870. ------------------------ SHA-1: 2330607f6ff996e8bbaa2c9abd19aeac616c2870 [ESGB-752] Follow the code change at [46371e8] to implement it for AMD's platform SHA-1: c1b3c105ec1074d4b8799168453c6990ddd6c764 [ESGB-1030] Update SMU to 36.19.v36.465 SHA-1: d435e05b82a9fc7c5c12f17e2f31bf92fad85458 ESGB-886 fix surveyor build issue SHA-1: 8d8c81d01209608d639185c4aca6bcdd51363351 (Removed) ESGB-886 modify RAS Smm code to use DELL log SHA-1: c544e2ce0fb630596d6bb4f5190e26e7920d0647 Fix JIT-107662 - Strings not localized under OS Deployment BIOS Memory Settings The current memory operating mode setting was not being translated in LC. Now it is. I also made a slight clean-up to the JIT-107659 changes (similar issue, different string). SHA-1: 727297353f9019adbdcae526577fc08038de4562 (Removed) [ESGB-828] AMD Naples/Rome RAS Porting SHA-1: 7dc799a1c852d38084f7d89311dc99ac2551f284 (Removed) [ESGB-828] AMD Naples/Rome RAS Porting SHA-1: c0b4a5554ef2109212b07e3ec014d354679f3925 JIT-110450 MLK - System BIOS has halted with the error CPU Exception Type 0x0E: Page Fault (Software) and RSOD at POST robust code for avoid bootoption get null and cause RSOD issue SHA-1: b3eec06d6f12514343ee2a08b179a2555c49b7ec [ESGB-1005] Add a PEIM driver to produce DELL_SPI_PPI SHA-1: 13c21d1698fd5cc1c1bc8b390d1fa8929e7b6fc5 [ESGB-1005] SPI Common Library support for PEI phase. SHA-1: 889be27b22a9e6885648f07451f1173105feab5d Merge branch 'master' of ssh://gtie-bitbucket.us.dell.com/esgbios/leo SHA-1: 55bb15f00036657eb108858fac8a9757028e4aed Merge branch 'master' of https://gtie-bitbucket.us.dell.com/scm/esgbios/leo SHA-1: 609b60fc9d622645642ba14982b696930c850cde Merge branch 'master' of https://gtie-bitbucket.us.dell.com/scm/esgbios/leo SHA-1: 5c05cf3cd2c1589c8479a32f75d78663b639b419 [JIT-109672 ] System BSOD's with NMI Hardware Failure on Surprise Remove/Insert on Surveyor with Windows SHA-1: dd09f56950170db7e5fba4b7afab77e4ae77bc9d [ESGB-992] Remove code to enable SPI fast read in SEC phase. SHA-1: 254334025846a72e08996fcfa6d84c805d81e895 [ESGB-992] Support SPI 4-Byte address mode. Adding 16MB offset to access upper 16MB when using 32MB flash part. SHA-1: c0f89f4b0e0772cc370ccb251a8614ff80dc60c0 [ESGB-992] temp hide Winbond W25Q256 SPI/QPI from support list to avoid access unstable. SHA-1: 35cba6e9f5cfb49efc4f6a1881242d12270f687b (Removed) ESGB-866 add code for RAS Smm SHA-1: a9fc02c7ebc2ac928a6f0b057ea5a3efe90ab53a [ESGB-609] Rename procedures per Coverity report SHA-1: fdf3afd1d969bb5f84e77ca2c3ea7b941f832f09 Fix JIT-107659 : Strings not localized under BIOS Integrated Devices The previous fix (68537fb1aac) caused the string to be translated, but one was unable to save changes in setup. Moved the controlling variable (EmbeddedVideoCurrentState) from the current value varstore to the feature support varstore. SHA-1: 961f4493e27287e702dd408965d8dc88bcf499bc (Removed) ESGB-866add AmdPlatformRasSspDxe module SHA-1: 729862ee30a4a5aad6e3d165ed3aac01acef6cd6 Merge branch 'master' of ssh://gtie-bitbucket.us.dell.com/esgbios/leo SHA-1:bf5261b0c8124f404fea7a883b7627f508baf1ef [ESGB-891] Fixed dangerous BIT macro define in DpiPlatformDescription.h SHA-1: 184608301504e311a073cb977dbe7f60492b3b61 ESGB-1051 Update some AWK library functions to handle "bad" input. Add files to make rebranding with a set of default values easier. SHA-1: 978a96d6342bd88f7380b6ad9329caf5499e34d0 * JIT-109965 : Fix BIOS which is built from Makea_partners.bat is always stuck in SEC phase because RTM volume doesn't be signed via ODM build process. SHA-1: da46be16314824707ad70ad662d59d42d8e24b2d [ESGB-849] ACPI - Platform porting Porting the location of MMIO base/limit registers on the second socket for all Rome projects. SHA-1: 77dab1550f3dacd8bbd90d9404f7db7e1bc2f45a [ESGB-849] ACPI - Platform porting Update APIC Mode enable method to support 2 sockets configuration on Rome. SHA-1: 4b67c11eaad61ad9921680648e2f51881b653eb8 [ESGB-849] ACPI - Platform porting Support 2 sockets IOAPICs in MADT table for all Rome projects. SHA-1: d3741d363bdb8a5cf896c0b7f390504f599b0e24 ESGB-849 ACPI - Platform porting Reserve BIOS region 0xFF000000 ~ 0xFFFFFFFF in ACPI to improve OS/Driver capability. SHA-1: dd55b927d5bb12c034e904623a39483fe1b1a759 [ESGB-1044] Integrate the 5.4.0-0001 S140 binaries for DecFY19 release. SHA-1: 7407f03cc0e0e0529ba3ff74ca944f9d8c2fc361 [ESGB-1032] Remove the code change which will enable SPI fast read.This reverts commit b10cfaad71e77e823700eff7569614e7029f7545. SHA-1: 687daaf865091333ecdc77ec5bf5ce9bd1b34210 [JIT-110231] AuthorizeDeviceFirmware (BIOS Attribute) has no effect when enabled - Restore original code that was accidentally removed by a previous change (r9824, 2c7eb12de80). SHA-1:aa71dc98d69a9d630c35091ccaf39f826d65a0bc ESGB-1032 NF Sustaining Add new setup options "Minimum SEV-ES ASID" for all AMD platforms. SHA-1: 069994d61162bbbbbe9dcb7d6e0badb21aba2bb5 ESGB-1032 NF Sustaining Add new setup options "NUMA Distance Enumeration" for all AMD platforms. SHA-1: ca8faf6492a0c3fee62283eee9b0e598fae43df2 ESGB-1043 Set debug print to iDrac serial port for ROME projects. SHA-1: 139184f57a27b27a428f8795bfdda8d89c0995a2 JIT-109965 : Modify Sesto PspData.xml SHA-1: 0fb1f40b5216414158ff213bfd16578e36e47b6a [ESGB-992] Fix a defect that system will write a error message back to SPI rom even though the update process is success SHA-1: 8ee56b5acd44ce65b9730a8b904277b5cf6992b0 JIT-109965 : Modify Roadster PspData.xml SHA-1: b8bfac1f5b28744e38e03d968764d63e9a30c12b [ESGB-992] Alar/Jalpa BIOS development for Rome ES1 Bring-up. - update PCIE port info table. remove some to avoid post hang. - update SATA port info table. SHA-1: 464ec93d80bf5512115f96c765cb394625b6140c Merge branch 'master' of https://gtie-bitbucket.us.dell.com/scm/esgbios/leo SHA-1: a9bf16d40280ad9108d048ef9de9f09f1e898d9b Merge branch 'master' of ssh://gtie-bitbucket.us.dell.com/esgbios/leo SHA-1: a83d0d3b2c9aed07a3f70540f32973904ddd9043 JIT-109965 : modify loadrule for Alar/Jalpa/Sesto/Reventon/Roadster projects SHA-1: f1a71b8c0c15f424f7cb5e24a23b64a2a1044277 Merge branch 'master' of ssh://gtie-bitbucket.us.dell.com/esgbios/leo SHA-1: 3a027054f0aca4d9c13c151d9fc8b12f26f89058 [ESGB-992] Early video fix for Alar/Jalpa SHA-1: 7d0b4a725cacd3d5474070c9905b39c286873a1b [ESGB-830] added LaginaSeca 2S project - Sesto SHA-1: 815718efac85dc066335f69cc0f209e9953936bd Merge branch 'master' of https://gtie-bitbucket.us.dell.com/scm/esgbios/leo SHA-1: 0fa29e747f2d6b36402661b78dfd5872366ef5e8 JIT-109965 : Add back Roadster Conf folder. SHA-1: 9b0c58ca0251ea299e1e3d38ad7332712540db78 [JIT-103639] Dell firmware not handling ResetSystem() correctly -Fix for AMD systems SHA-1: 5027525acdc7acba9281a8fcc035f8be3b13ad2b ESGB-1035 Update localized strings. Add .gitignore file to ignore files created by the localization update process. ------------------------ **************************************************************************** - Version: 91.0.0 - System: Jalpa(R7515)/Alar(R6515) - Release Date: 08/25/2018 - Released By: Leo YL Chen - SWB#: JR2MF (RTS) **************************************************************************** Included collaterals: * AGESA v9 v0.0.5.2 for Family 17h * PSP Firmware Version: 00.0C.00.20 * SMU Firmware Version: 36.17.0 ~~~~~~~~~~~~~~~ Important Note: ~~~~~~~~~~~~~~~ 1. 95.0.1 and 95.0.2 are for Naples CPU bring up test. The 95.0.1 and 95.0.2 support Naples CPU only. 2. 91.0.0 is for Rome ES1 CPU bring up test. The 91.0.0 supports Rome CPU only. 3. Update BIOS revision 91.0.0 from 95.0.1 or 95.0.2, please use programmer machine to flash the 32M rom file. ~~~~~~~~~~~~~ KNOWN ISSUES: ~~~~~~~~~~~~~ 1. OCP Port was disabled, because the system will hang at POST when OCP is enabled. 2. The mini-PERC UEFI driver will not be loaded and the function failed. 3. Riser 1A for Alar 1U/Jalpa 2U system and riser 1B for Jalpa 2U system were disabled, because the system will hang at POST when enabled. 4. SLIMLINE_1/ SLIMLINE_2/ SLIMLINSLIMLINE_4/ SLIMLINE_5/SLIMLINE_6 were disabled, because the system will hang at POST when enabled. 5. SLIMLINE_3 SATA HDD devices will not be showed in BIOS setup menu. 6. SLIMLINE_3 was dedicated for SATA function. SATA HDD tray 1, 2 of Alar 1U and HDD tray 1, 2, 5, 6 of Jalpa 2U can't detect hdd devices Please use HDD tray 0, 3 for Alar 1U system, or use HDD tray 0, 3, 4, 7 for Jalpa 2U system. 7. LOM device was disabled, because Rome CPU WAFL ports issue. ~~~~~~~~~~~~~ CHANGES: ~~~~~~~~~~~~~ 1. Initial version release for Rome ES1 CPU bring up. - Modified SATA port map for Rome CPU root port change. - Modified DXIO table for Rome CPU root port change. - Modify DIMM Slot Label to match RAS information for Alar/Japla planar. - Add Alar 1U/ Jalpa 2U Planar ID, Chassis Type/Height, and platform types. 2. [ESGB-992] Fix a defect that system will write a error message back to SPI rom even though the update process is success. 3. [ESGB-992] Switch back to SPI 3 bytes address mode and add additional 16MB offset to SPI linear address to access upper 16MB. 4. Update Code Base SHA-1: edb26af247a73b565d0216ca7aa46bfd37e0927f