You can install the {0}, or you can select a different client on the Log In page or the Client Preferences page.
Yes=Yes
No=No
Next=Next >
Finish=Finish
# Two factor authentication
PINNotChanged=Your PIN was not set.
2FactorConfigError=There is an error with the two-factor authentication configuration.
PINEither=A new PIN is required. Either choose a new PIN, or the system can generate one for you.
PINEither2=You can choose a new PIN, or the system can generate one for you.
NewUserPINText1=You must choose a new PIN.
NewUserPINText2= Enter the new PIN in both boxes and click OK. After setting your PIN, you will need to log in with your new PIN.
ChallengeText1=More information is required.
ChallengeText2=The authentication system requires some additional information. Please supply it and press OK to continue the login process, or Cancel to quit.
NewPIN1=New PIN
NewPIN2=New PIN again
PINChangingMessage1=A new PIN has been generated.
PINChangingMessage2=You have 10 seconds to remember your new PIN. To keep your PIN secure, do not write it down.
PINExpired=You need a new PIN. A new PIN will be generated for you. Your new PIN will be displayed for 10 seconds when you click OK.
PINExpired1=A new PIN will be generated.
PINExpired2=A new PIN will be generated. Your new PIN will be displayed for 10 seconds when you click OK.
NextTokenText=Next tokencode:
NextTokenText1=Please enter next tokencode.
NextTokenText2=You must enter the next tokencode that appears on your token (that is, the number displayed on the token without your PIN) to complete the authentication.
After entering the tokencode, click Log In to complete the authentication.
PasswordChallengeText=Password:
PasswordChallengeText1=Please enter your password.
PasswordChallengeText2=After entering the password, click Log In to complete the authentication.
PasswordChallengeText3=Enter your password to complete the authentication.
InvalidPasswordChallengeResponse=The supplied password was not valid. Passwords must be between 1 and 128 characters in length.
PasswordChallengeReasonFirstTime=By supplying your password here, the system will remember it and allow you to perform future log ins with just your PASSCODE.
PasswordChallengeReasonLookupFailure=The system was unable to obtain the correct password. Please enter the correct password to log in.
RSASetPasswordFailed=Unable to update the password cached by the RSA SecurID Agent. Please check that both the RSA SecurID Agent and Authentication Server are the correct version and are properly configured to use the Windows Password Integration facility.
RSAGetPasswordFailed=Unable to obtain the cached password from the RSA SecurID Agent. Please check that both the RSA SecurID Agent and Authentication Server are the correct version and are properly configured to use the Windows Password Integration facility.
MustEnterPIN=You must enter a PIN. Please try again.
MustEnterTokencode=You must enter a tokencode. Please try again.
SafewordAuthenticatorError=There was a problem with the SafeWord authenticator while authenticating the user.
PINSystem=System generated
NFuseNextTokencode=Next tokencode
NFusePasswordChallenge=Password required
SecretReadError=Could not read the RADIUS secret file.
PINUser=User generated
PINChanging=Your PIN will be set to
NFuseChangePIN=Set PIN
RadiusAuthenticatorError=There was a problem with the Radius authenticator while authenticating the user.
SecurIDAuthenticatorError=There was a problem with the SecurID authenticator while authenticating the user.
NFuseChallenge=Please respond
PINRejected=Your PIN could not be set.
PINEither1=Please obtain a new PIN
PINChanged=Your PIN has been set successfully. Please log in with your new PIN.
Passcode=PASSCODE:
PINNoMatch=The PINs did not match. Please try again.
# Password Expiry Warning
PwdExpWarn=Password Expiry Warning
PwdExpWarnMessage=Your password will expire shortly.
PwdExpWarnBodyPre=Your password will expire within the next
PwdExpWarnBodyPostDay=day.
PwdExpWarnBodyPostDays=days.
PwdExpWarnBodyPostHours=24 hours.
PwdExpWarnBodyPost=You can either change it now, or continue and change it later.
PwdExpWarnQuestion=Would you like to change your password now?
# Change Password
ChangePasswordTitle=Change Password
ChangePasswordConfirm=Confirm password:
ChangePasswordOld=Old password:
ChangePasswordConfirmDifferent=The new passwords you have entered do not match.
ChangePasswordOldInvalid=The old password entered was incorrect.
ChangePasswordNewInvalid=The new password supplied was unacceptable. Make sure your new password is of a reasonable length, and is not the same as a password you have already used.
ChangePasswordFailed=The change password operation failed.
ChangePasswordNew=New password:
ChangePassword=Change Password
ChangePassword3=Consult your help desk or corporate policy for any relevant password guidelines.
# NDS Authentication
NDSBadUsername=Your user name must either be fully-qualified with a leading dot (such as .user.company.com) or the first part of your user name without any dots (for example, user).
NDSServerFailedContextSearch=Context lookup failure on server "{0}". The error was "{1}". This server will be temporarily removed from the list of active servers.
Tree=Tree:
Context=Context:
NDSAllServersFailed=All NDS servers have failed. No context lookup will be possible. Users might still be able to log in with fully qualified user names.
lookupContextString=[Find Context]
NDSMultiContext=Multiple contexts were found for this user.
# Certificate Authentication
CertificateUser=Smart card
CertificateSSONUser=Pass-through with smart card
InvalidCertificate=The certificate presented is not valid.
LoggedOutCloseBrowser=You are logged out from the Web Interface. Please close your browser.
NoCertificatePresent=No certificate was presented.
NoCertificateLogin=Certificate login is not allowed. Please contact your administrator.
CertificateLoginError=Authentication failed due a problem with your certificate. Please contact your administrator, giving HTTP error "{0}" as the reason for failure.
# Citrix Advanced Access Control Integration
NoAGELogin=Login through Citrix Advanced Access Control is not allowed. Please contact your administrator.
AGEAuthenticationError=Access is denied. Please contact your system administrator.
AuthSvcUnknownAccessInfoError=A communication error occurred while attempting to authenticate with the Advanced Access Control authentication service at "{0}". Check the authentication service is running. The following message was provided by the underlying platform: "{1}".
AuthSvcUnknownLogoutError=A communication error occurred while attempting to close the session using the Advanced Access Control authentication service at "{0}". Check the authentication service is running. The following message was provided by the underlying platform: "{1}".
AuthSvcAccessInfoFailed=The Advanced Access Control authentication service failed to authenticate the user.
AuthSvcLogoutFailed=The Advanced Access Control authentication service failed to close the session.
# General Authentication
LogBackIntoWI=Log back in to the Web Interface
LogoffButton=Log Off button
YouHaveLoggedOut=You have logged off
SilentAuthentication=Use silent authentication
LoggedoutTitle=Logged Off
LoggingOutTitle=Logging Off
LogOff=Log Off
LogoffWI=Web Interface only
LogoffWIApps=Web Interface and applications
WelcomeLoggedOutCloseBrowser=You have logged off from the Web Interface. For security reasons, you should now close this browser. To log in to the Web Interface again, you must restart your Web browser.
NoAnonymousLogin=Anonymous log in is not allowed. Please contact your administrator.
UnauthenticatedUser=A logon attempt has been made by an unauthenticated user. If this problem persists, attempt a repair of the site using the Access Management Console.
ADFSUnauthenticatedUser=A logon attempt has been made by an unauthenticated user. Verify that shadow accounts have been created for all of the intended users of the system. If this problem persists, attempt a repair of the site using the Access Management Console.
LogoutError=An error has occurred while logging off from your applications.
LogoffFederatedServicesError=An error has occurred while logging off from federated services.
GeneralAuthenticationError=An authentication error has occurred.
BlankDomain=A domain must be specified.
LoggedOut=Logged Off
NoAuthenticationMethods=There are no authentication methods currently available.
Domain=Domain:
LoginType=Log in Type:
PleaseLogin5=To log in, select an authentication type, enter the credentials required, and then click Log In.
If you do not know your log in information, contact your help desk or system administrator.
SilentLoginError=Automatic smart card log in has failed. HTTP error "{0}" was reported as the reason for failure.
PleaseLogin3=If you do not know your log in information, contact your help desk or system administrator.
UserName=User name:
Password=Password:
ExplicitUser=Explicit
SessionExpired=Your session with the server has expired. You have been logged off.
NoExplicitLogin=Explicit log in is not permitted. Please contact your administrator.
SingleSignOnUser=Pass-through
NoIntegratedLogin=Integrated log in is not allowed. Please contact your administrator.
LoginTitle=Web Interface Log In
Authentication=Authentication
PleaseLogin4=To log in, enter the credentials required, and then click Log In.
If you do not know your log in information, please contact your help desk or system administrator.
EnterLoginCredentials=Enter Log In Credentials
BlankUsername=The user name cannot be blank.
YouHaveLoggedOutText=You have logged off from the Web Interface. Follow the link provided to log back on.
HiddenDomainWithNoDomainSupplied=The domain field is hidden, no log in domains are specified, and the user did not supply UPN credentials.
NDSUnsupported=The configuration is invalid: NDS authentication is not supported in this version of the Web Interface.
SSOUnsupported=The configuration is invalid: neither smart card nor pass-through authentication are supported in this version of the Web Interface.
DomainUsernameCredentialFormatNotAllowed=Only UPN format credentials are allowed; for example, username@example.citrix.com
UPNcredentialFormatNotAllowed=Only Domain Username format credentials are allowed.
CertificateErrorTitle=Web Interface - Certificate Error
AccessDeniedErrorTitle=Web Interface - Access Denied Error
# JICA Settings
OverrideJICAPackages=Select the Client for Java packages:
JICAPrinter=Printer mapping
JICAClipboard=Clipboard
JICACDM=Client drive mapping
JICAConfigUI=Configuration UI
JICAAudio=Audio
JICAZero=Local text echo
# Audio Settings
AudioMedium=Medium quality
AudioHigh=High quality
AudioQuality=Audio Quality:
AudioLow=Low quality
AudioOff=Off
# Color Settings
HighColor=High color (16 bit)
TrueColor=True color (24 bit)
256Colors=256 colors
16Colors=16 colors
WindowColor=Window Color:
# Window Size Settings
CustomDimension=Custom dimension
PercentOfDisplay=Percent of screen
SelectWinSize=Select window size:
CustomSize=Custom size:
PercentOfScreen=Percent of screen:
Seamless=Seamless
WindowSize=Window Size
FullScreen=Full screen
# General Settings
AppIcon=Icon
RememberFolder=Remember folder location
CurrentFolder=Current folder:
ShowFolder=Show current folder location
AppDescription=Description
AppName=Name
ApplicationDetails=Display following application details
KeyPassthroughRemote=On the remote computer
KeyPassthroughFullscreenOnly=In full screen mode only
KeyPassthroughLocal=On the local computer
ApplyWindowsKeyCombinations=Apply Windows key combinations (for example, ALT+TAB):
Layout=Layout
Auto=Auto
Compact=Compact
SelectLayout=Select a layout:
ColumnsOfApplications=Columns of applications:
EnablePDADeviceSupport=Enable PDA device support
EnablePrinterMapping=Enable printer mapping
AsstPresentationSettings=Use this page to configure language, user interface layout, application display, and silent authentication.
AsstClientSettings=Use this page to select your preferred client and Client for Java packages.
CustomSettingsNotAllowed=You are not permitted to customize your Web Interface session.
SettingsError1=The application icon or application name must be enabled.
NFuseSettings1=Use this page to override the default settings provided by your system administrator. For example, if you want to start from the folder you last visited the next time you log in, select Remember folder location. For more information, contact your system administrator.
SectionConnection=Connection Preferences
SectionDeployment=Client Preferences
AsstLogBackIntoWI=Use this link to get back to the Login page to log back on to the Web Interface.
NFuseConnectionSettings1=Use this page to select your preferred window size, keyboard mapping, colors, audio quality, and local device mappings.
SettingsTitle=Settings
AsstConnectionSettings=Use this page to select your preferred window size, keyboard mapping, colors, audio quality, and local device mappings.
NFuseSettings=Settings
AsstWorkspaceControl=Use this page to customize reconnect and log off behaviors.
NFusePresentationSettings1=Use this page to configure language, user interface layout, application display and silent authentication.
SettingsError=You have entered invalid data. Please reenter the data and select OK.
SelectClient=Select a client to launch applications:
NFuseClientSettings1=Use this page to select your preferred client and Client for Java packages.
SectionPresentation=Presentation Preferences
SettingsNavigationGuide=Navigate to the relevant settings sections using the following links.
NFuseWSCSettings1=Use this page to customize reconnect and log off behaviors.
Index=Index
AppAccessStreaming=Streaming client
AppAccessRemote=Remote client
ClientPreferencesSection=Application launch method
StreamingOptionDisabledNoOsSupport=Your system does not support streaming application access.
StreamingOptionDisabledNoBrowserSupport=Your browser does not support streaming application access.
StreamingOptionDisabledNoClientInstalled=There is no streaming client installed on your system.
StreamingAppLaunchNoOsSupport=The resource you requested cannot be accessed because your system does not support streaming application access.
StreamingAppLaunchFailureNoBrowserSupport=The resource you requested cannot be accessed because your browser does not support streaming application access.
StreamingAppLaunchFailureNoClientInstalled=The resource you requested cannot be accessed because the streaming client is not installed on your system.
StreamingAppLaunchFailureNotPermitted=The resource you requested cannot be accessed because streaming application access is not permitted from untrusted sites.
StreamingAppLaunchFailureStreamingNotEnabled=The resource you requested cannot be accessed because streaming access is not enabled.
# Workspace Control
WorkspaceControlLogoffPartialTemp=Some of your applications may not have been logged off. Close all remaining applications. If this problem persists, contact your administrator.
Disconnect=Disconnect
WorkspaceControlLogoffPartialPersist=Some of your applications may not have been logged off. Close all remaining applications. If this message is not usually displayed at the end of your sessions, contact your administrator.
Reconnect=Reconnect
WorkspaceControl=Workspace Control
DisconnectError=An error has occurred while disconnecting your applications.
DisconnectInternalError=An error has occurred while disconnecting a user's applications. Either workspace control is not enabled, the user is anonymous, or there has been an error retrieving the user's credentials or client name.
ReconnectError=An error has occurred while reconnecting your applications.
ReconnectButton=Reconnect button
ReconnectInternalError=An error has occurred while reconnecting a user's applications. Either workspace control is not enabled, the user is anonymous, or there has been an error retrieving the user's credentials or client name.
WorkspaceControlDisconnectPartialPersist=Some of your applications may not have been disconnected. Close all remaining applications. If this message is not usually displayed at the end of your sessions, contact your administrator.
WorkspaceControlReconnectPartialPersist=Some of your applications may not have been reconnected. If this message is not usually displayed at the end of your sessions, contact your administrator.
WorkspaceControlDisconnectPartialTemp=Some of your applications may not have been disconnected. Close all remaining applications. If this problem persists, contact your administrator.
WorkspaceControlReconnectPartialTemp=Some of your applications may not have been reconnected. Try reconnecting to your applications again. If this problem persists, contact your administrator.
LogOffFrom=Logs off from:
NoAppToReconnect=There are no existing applications available for reconnection.
# Persistent URLs
DoNotCloseThisWindow=Please do not close this window, otherwise you may need to be reauthenticated.
ApplicationLaunch={0} is being launched.
HaveAwaitingApplication=Your application will be launched after you provide the correct credentials.
ShortcutDisabled=Application shortcuts are currently disabled.
NoLaunchApplication=Click the Log Off button or launch another application.
DirectLaunchMode=Direct Application Launch
# Account self service
CPMServiceUnknownError=A communication error occurred while attempting to authenticate with the Password Manager Service at "{0}". Check that the Password Manager Service is running. The following message was provided by the underlying platform: "{1}".
CPMServiceBadURL=An invalid URL was provided for the Password Manager Service: "{0}". Please correct this URL in the site configuration.
AccountSelfService=Account Self Service
WelcomeSelfService=Welcome to Account Self Service
SelfServiceEntryWelcome=Account Self Service helps you to log in to the Web Interface if your account is locked or if you have forgotten your password.
Account Self Service is only available if you have already registered your answers to security questions through the Citrix Password Manager Agent. If you do not know how to do this, please contact your help desk or system administrator. ChooseTask=Choose a task ChooseTaskToPerform=Choose a task to perform with Account Self Service: UnlockAccount=Unlock account UnlockAccountDesc=Select this option if your account is locked. ResetAccountPassword=Reset account password ResetAccountPasswordDesc=Select this option if you have forgotten your account password. StartUnlockAccount=Click OK to start Account Self Service and unlock your account. StartResetAccountPassword=Click OK to start Account Self Service and reset your account password. SelfServiceNotAllowed=You cannot use the Account Self Service feature. Please contact your system administrator. SelfServiceNotAllowed2=You cannot use the Account Self Service feature. SelfServiceNotComplete=You did not complete Account Self Service. Your account has not been changed. SelfServiceLockedOut=You are temporarily locked out of Account Self Service. Please contact your system administrator. AccountDetails=Account Details EnterAccountDetails=Enter your account details SelfServiceAccountWelcome=To continue, enter the account details required and then click Next.
If you do not know your account details, please contact your help desk or system administrator. SecurityQuestion=Security Question AnswerSecurityQuestions=Answer your security questions SecurityQuestionWelcome=Before you can use account self service, you need to confirm your identity by answering your security questions.
Your answers here must match the answers you gave during Security Questions Registration. Your answers are shown as you enter them; be sure that no one else can observe them. Question=Question Of=of AnswerInstruction=Answer this question exactly as you answered it during registration. AnswerLabel=Answer: InvalidAnswer=You must provide a valid answer to the question. AnswerWasIncorrect=Your answer to this question was incorrect. AllowedAttemptsReached=Your answer to this question was incorrect. The allowed number of attempts has been reached. AccountUnlockFailed=Web Interface failed to unlock your account. Please contact your system administrator. AccountUnlocked=Account Unlocked AccountHasBeenUnlocked=Your account has been unlocked AccountUnlockedWelcome=Your account has been unlocked successfully. Follow the link provided to log in to the Web Interface. AccountUnlockedInfo=You answered all your security questions successfully. Your account has been unlocked. ResetPassword=Reset Password ResetYourPassword=Reset your password ResetPasswordWelcome=Enter and confirm your new password.
Consult your help desk or corporate policy for any relevant password guidelines. PasswordWasReset=Password was reset PasswordHasBeenReset=Your password has been reset ResetPasswordInfo=You answered all your security questions successfully. Your password has been reset. ResetPasswordWelcome2=
Your password has been reset successfully. Follow the link provided to log in to the Web Interface. ResetPasswordFailed=Web Interface failed to reset your password. Please contact your system administrator. LogInToCPS=Log in to the Web Interface AsstLogIntoCPS=Use this link to get back to the log in screen to log in to the Web Interface. ForgottenPasswordMessage=If you cannot remember your account password, you may be able to reset it using {0}. ToUnlockAccountMessage=You may be able to unlock your account using {0}. # Tool tips TipStandardWindowSizeList=Select a standard window size from the list TipJICAClipboard=Select this option to include the clipboard package TipPinTypeUser=Specifies your own new PIN TipPresentationSettings=Click here to configure language, user interface layout, application display, and silent authentication TipConnectionSettings=Click here to select your preferred window size, keyboard mapping, colors, audio quality, and local device mappings TipClientSettings=Click here to select your preferred client and Client for Java packages TipOKSettings=Click here to save the settings TipCancelSettings=Click here to discard changes to the settings TipJICAZero=Select this option to include the local text echo package TipOKChangePassword=Click here to change your password TipChangePasswordOld=Enter your old password TipChangePasswordNew=Enter your new password TipChangePasswordConfirm=Enter your new password again TipCancelChangePassword=Click here to cancel the operation TipJICAAudio=Select this option to include the audio package TipJICACDM=Select this option to include the client drive mapping package TipJICAConfigUI=Select this option to include the configuration UI package TipJICAPrinter=Select this option to include the printer mapping package TipWindowColor=Select the window color TipAudioQuality=Select the audio quality TipPercentOfScreen=Select this option to specify the window size as a percentage of the client's display TipPercentOfScreenInput=Enter the percentage value TipCustomSize=Select this option to use customized window sizes. Enter the width and height. TipCustomSizeWidthInput=Enter the window width in pixels TipCustomSizeHeightInput=Enter the window height in pixels TipAppIcon=Displays icons in the Applications page TipAppName=Displays application names in the Applications page TipAppDescription=Displays detailed descriptions for applications in the Applications page TipRememberFolder=Remembers your folder location TipShowFolder=Displays the folder location in the Applications page TipSilentAuthentication=Enables silent authentication TipStandardWindowSize=Select this option to use standard window sizes. Enter the size in the field provided. TipLoginType=Select the log in type TipUserName=Enter your user name TipPassword=Enter your password TipDomain=Specify your domain name TipContext=Specify your NDS context TipTree=Specify your NDS tree name TipPasscode=Enter your passcode TipTokenCode=Enter the next tokencode TipNewPin1=Enter your new PIN TipNewPin2=Enter your new PIN again TipPinTypeSystem=Allows the system to generate a new PIN TipLoginButton=Click this button to log in TipLogOffButton=Click here to log off the Web Interface and your applications TipReconnectButton=Click here to reconnect to your applications TipDisConnectButton=Click here to disconnect your applications and return to the log in screen TipKeyPassthrough=Select how the Windows key combinations should be handled TipKeyPassthroughList=Select how the Windows key combinations should be handled TipLayoutType=Select the user interface layout TipAppColumns=Specify the number of applications to be displayed in one row TipAppColumnsInput=Enter the number of applications to be displayed in one row TipWorkspaceControl=Click here to customize reconnect and log off behaviors TipLogBackIntoWI=Use this link to return to the Login page to log back on to the Web Interface TipLogIntoCPS=Use this link to return to the Login page to log on to the Web Interface TipEnableVirtualCOMPort=Select this option to enable PDA device support TipEnablePrinterMapping=Select this option to enable printer mapping TipReconnectButtonSetting=Enables manual reconnection. Select the types of applications for reconnection TipLogOffButtonSetting=Select how application log off should be handled TipAppAccessStreaming=Select this option to use streaming application access TipAppAccessStreamingDisabled=You do not have a streaming client installed on your system TipAppAccessRemote=Select this option to use remote application access TipUnavailableRadeApp=(unavailable) TipSelfServiceButton=Click here to unlock your account or reset your password using Account Self Service TipAnswer=Enter an answer to the security question TipNoPasswordChange=Leave password unchanged and continue to rest of site