Debug Labs


Unhandled Exception in Component Code (Software - NONCONTINUABLE)

This lab will demonstrate an Unhandled Exception in a component. In this scenario, an Unhandled Exception in the COM Component "badCom.dll".

This scenario is presented in 2 variations, the 1st variation shows the unhandled exception in a COMSVCS thread running the COM object, while the second variation shows the unhandled exception in a spawned thread other than the one running the COM object. 

In both variations, the Unhandled Exception is caused by a NONCONTINUABLE exception implemented by a call to RaiseException(...).

1- Lab Setup
	

Note: This lab assumes that you have already installed the necessary lab files to run it.

1- Verify the site is running in medium protection

2- Verify that the process "dllhost.exe" mapped to the out of process pooled application is running and note down its PID

To find the PID of the desired dllhost, do the follwing:

- Open Component Services

- Expand "Component Services" Node

- Expand "Computers" Node

- Expand "My Computer" Node

- Select "COM+ Applications"

- Click "Status View" icon and notice the PID column on the right hand pane

 

3- Attach windbg to the dllhost process with the PID found in step 2

a) Using the GUI:

- Click "File"

- Click "Attach to Process"

- Select "dllhost.exe" with the PID found in step 2 and click "OK"

b) Using the command prompt:

- Switch to thr folder where the debugging tools for windows is installed

- Type in "windbg -p <PID>" and hit Enter 

 

Note: If the failfast feature is not disabled, you need to instruct the debugger to catch "Other Exceptions" by running the following command:

In Windbg command line, type in " sxe * " with no quotation marks and press Enter.

4- In windbg command line, type in "g" with no quotation marks and press Enter

 

 

2- Run Scenario

1- Click the "Invoke Component" button to load the COM Component in the dllhost process memory space. You should see the COM Component "badCom.dll"among the list of modules loaded in dllhost.exe
2- Click the "Cause Unknown Exception V:1" button the first time to cause a 1st chance Unknown Exception in dllhost.exe.
 Note that the debugger breaks and diplays 
	a- Comments about the exception
b- The value of the registers
c- The module where the Eception happened
d- The assembly line that caused the Exception
3- To study the second variation of this lab, click the "Cause Unknown Exception V:2" button.

                                                                           

                                                                                         

1) Unhandled Exception in the main thread running HttpExtensionProc:  (Variation 1)

1- Debug Annotation

 

1) Without symbols

 

 

a) The faulting Stack

 

The stack backtrace of the thread that caused the Unhandled Exception would look like:

 

 

0:021> kvn50

# ChildEBP RetAddr Args to Child

WARNING: Stack unwind information not available. Following frames may be wrong.

00 01e4f0d4 0203327e 00000057 00000001 00000000 KERNEL32!RaiseException+0x37

01 01e4f0f4 02032aaa 00000001 65723d73 31765f32 badcom!DllUnregisterServer+0x1501

02 01e4f124 779d7b9d 0040bfd8 00408a60 00000000 badcom!DllUnregisterServer+0xd2d

03 01e4f140 77a22c42 0040bfd8 00000024 00000004 OLEAUT32!DispCallFunc+0x15d

04 01e4f1d0 020325d0 000c020c 0040bfd8 00000003 OLEAUT32!ClearCustData+0x588

05 01e4f1f8 6b61dff3 0040bfd8 00000003 6b659388 badcom!DllUnregisterServer+0x853

06 01e4f274 6b62171a 004085e8 0040bfd8 00000003 vbscript!DllRegisterServer+0x844c

07 01e4f954 ffffffff 0040b140 00000000 004001a0 vbscript!DllRegisterServer+0xbb73

08 77f80000 00000003 00000004 0000ffff 000000b8 0xffffffff

 

This call stack shows that an exception of code (00000057) was raised in "badext.dll". This exception is a software exception that translates to "ERROR_INVALID_PARAMETER". In this case,

the exception is NONCONTINUABLE (Second parameter of RaiseException is not 0) which means that any attempt to continue execution causes the EXCEPTION_NONCONTINUABLE_EXCEPTION

exception causing the process to terminate.

 

Again, In this call stack, it is clear that the culprit is "badCom.dll". So it is enough to tell the customer to contact the dll vendor to fix it. If it is an in-house component and the customer would like help

from Microsoft, they should open an advisory case to troubleshoot the issue further.

 

 

2) With symbols including public symbols of "badCom.dll"

 

 

First, we need to add the private symbol path(company wide symbols) as well as public symbols of our dll

a) Using the GUI:

- Click "File"

- Click "Symbol File Path"

- Type in SRV*C:\LabSymbols*\\symbols\symbols;C:\IISDebugLabs\symbols\Pub and hit Enter

b) Using the ".sympath+" command:

.sympath+ SRV*C:\LabSymbols*\\symbols\symbols;C :\IISDebugLabs\symbols\Pub

 

 

The stack backtrace of the thread that caused the Unhandled Exception would look like:

 

 

 

0:021> kvn50

# ChildEBP RetAddr Args to Child

00 01e4f0d4 0203327e 00000057 00000001 00000000 KERNEL32!RaiseException+0x56 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\windows\base\client\thread.c @ 1382]

01 01e4f0f4 02032aaa 00000001 65723d73 31765f32 badcom!doRE2+0x2a

02 01e4f124 779d7b9d 0040bfd8 00408a60 00000000 badcom!CScenarios::processSc+0x260

03 01e4f140 77a22c42 0040bfd8 00000024 00000004 OLEAUT32!tPushValJmpTab+0xf5 [D:\OA\src\dispatch\WIN32\i386\invoke.asm @ 340]

04 01e4f1d0 020325d0 000c020c 0040bfd8 00000003 OLEAUT32!CTypeInfo2::Invoke+0x244 (CONV: stdcall) [D:\OA\src\typelib2\tiinvoke.cpp @ 629]

05 01e4f1f8 6b61dff3 0040bfd8 00000003 6b659388 badcom!ATL::IDispatchImpl::Invoke+0x41 (CONV: stdcall) [c:\nt\public\sdk\inc\atl30\atlcom.h @ 4093]

06 01e4f274 6b62171a 004085e8 0040bfd8 00000003 vbscript!CatchIDispatchInvoke+0x9e (CONV: stdcall) [E:\vbscript\src\core\callout.h @ 111]

07 01e4f384 6b604038 0009001f 0000023f 004084e0 vbscript!InvokeDispatch+0x330 (FPO: [EBP 0x6b659388] [7,60,4]) (CONV: stdcall) [E:\vbscript\src\vbscript\var.cpp @ 1211]

08 01e4f3c8 6b603156 004084e0 0040bfd8 00000003 vbscript!GetDispatchDispID+0x1cc (FPO: [EBP 0x01e4f954] [4,3,4]) (CONV: stdcall) [E:\vbscript\src\vbscript\var.cpp @ 972]

09 01e4f998 6b601ef7 00000009 01e4fa8c 00000000 vbscript!CScriptRuntime::Run+0x3b8d (CONV: thiscall) [E:\vbscript\src\vbscript\interp.cpp @ 3347]

0a 01e4f9c8 6b601c5c 00000000 00000000 00000000 vbscript!CScriptRuntime::Init+0x2e1 (FPO: [EBP 0x6b658a10] [6,0,4]) (CONV: thiscall) [E:\vbscript\src\vbscript\interp.cpp @ 904]

0b 01e4fb08 6b606fc5 004084e0 6b606ef1 0040bf68 vbscript!CScriptEntryPoint::Call+0x76 (FPO: [5,58,2]) (CONV: thiscall) [E:\vbscript\src\vbscript\entrypnt.cpp @ 40]

0c 01e4fb54 749f2e70 01911e90 6b610c9a 00000000 vbscript!CSession::GetGlobalEntryPoint+0x25 (FPO: [3,0,0]) (CONV: thiscall) [E:\vbscript\src\core\wrapper.cpp @ 485]

0d 01e4fb6c 749f3af0 01912060 01912060 012d1e90 asp!CResponse::Release+0x18 (FPO: [1,0,1]) (CONV: stdcall) [D:\nt\private\inet\iis\svcs\cmp\asp\response.cpp @ 1716]

0e 01e4fb9c 74a22f5b 00000000 74a32c70 77e873a1 asp!CActiveScriptEngine::TryCall+0x15 (FPO: [Non-Fpo]) (CONV: thiscall) [D:\nt\private\inet\iis\svcs\cmp\asp\scrptmgr.cpp @ 2040]

0f 01e4fbe0 749f3a72 00000000 01e4fc28 749f593d asp!CActiveScriptEngine::Call+0x10c (FPO: [Non-Fpo]) (CONV: thiscall) [D:\nt\private\inet\iis\svcs\cmp\asp\scrptmgr.cpp @ 2005]

10 01e4fbec 749f593d 01e4fc4c 00000000 00000000 asp!CallScriptFunctionOfEngine+0x48 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\inet\iis\svcs\cmp\asp\exec.cpp @ 1394]

11 01e4fc28 749f54c8 01a11fa0 01591e90 01e4fc94 asp!ExecuteRequest+0x19e (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\inet\iis\svcs\cmp\asp\exec.cpp @ 326]

12 01e4fc70 749fcf9b 01a11fa0 01591e90 01e4fc94 asp!Execute+0x17e (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\inet\iis\svcs\cmp\asp\exec.cpp @ 190]

13 01e4fcc0 749fcc37 00000000 000bd6f8 01e4fd58 asp!CHitObj::ViperAsyncCallback+0x452 (FPO: [Non-Fpo]) (CONV: thiscall) [D:\nt\private\inet\iis\svcs\cmp\asp\hitobj.cpp @ 2487]

14 01e4fcd8 787c214a 00000000 77acd455 01b51e90 asp!CViperAsyncRequest::OnCall+0x3f (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\inet\iis\svcs\cmp\asp\viperint.cpp @ 194]

15 01e4fce0 77acd455 01b51e90 77aa71a0 00000000 COMSVCS!STAActivityWorkHelper+0xa (FPO: [1,0,0]) (CONV: stdcall) [.\stathred.cpp @ 1321]

16 01e4fd24 77acd318 000751d8 00085860 787c2140 ole32!EnterForCallback+0x6a (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\ole32\com\dcomrem\crossctx.cxx @ 1758]

17 01e4fe50 77acd1dd 00085860 787c2140 01b51e90 ole32!SwitchForCallback+0x12b (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\ole32\com\dcomrem\crossctx.cxx @ 1643]

18 01e4fe78 77aac61a 00085860 787c2140 01b51e90 ole32!PerformCallback+0x50 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\ole32\com\dcomrem\crossctx.cxx @ 1558]

19 01e4fed4 77ad1185 000757c0 787c2140 01b51e90 ole32!CObjectContext::InternalContextCallback+0xf5 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\ole32\com\dcomrem\context.cxx @ 3942]

1a 01e4fef4 787beff3 000757c0 787c2140 01b51e90 ole32!CObjectContext::DoCallback+0x1a (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\ole32\com\dcomrem\context.cxx @ 3798]

1b 01e4ff24 787c11ad 00010007 00000000 01e4ffec COMSVCS!STAActivityWork::DoWork+0x73 (FPO: [0,4,2]) (CONV: thiscall) [..\inc\STAThred.h @ 340]

1c 01e4ffb4 77e887dd 00b5f364 00010007 00000000 COMSVCS!STAThread::STAThreadWorker+0x465 (FPO: [EBP 0x01e4ffec] [1,31,4]) (CONV: stdcall) [.\stathred.cpp @ 628]

1d 01e4ffec 00000000 787c0d48 00b5f364 00000000 KERNEL32!BaseThreadStart+0x52 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\windows\base\client\support.c @ 460]

 

 

Now, with the public symbols lined up, we see that the RaiseException() call in kernel32 came from the function (doRE2) in "badCom.dll".

that was called from the class "CScenarios" by the method "ProcessSc()"

 

Again, In this call stack, it is clear that the culprit is "badCom.dll". So it is enough to tell the customer to contact the dll vendor to fix it. If it is an in-house component and the customer would like help

from Microsoft, they should open an advisory case to troubleshoot the issue further

 

Advanced Technique  

 

Notice also that the call to our extension was invoked by "wam.dll" (Web Application Manager). It is the component responsible for handing

over any request that needs to be processed by an ISAPI extension.

 

One way to see the http request passed to our extension is to dump the structure of "pWamExecInfo".

 

 

Maybe the most interesting finding in this dump analysis -in addition determining the dll cause of the crash- is to determine the ASP page

the faulting thread was running. There are many ways to find that, let find the running ASP page by dumping the ASP template class.

In frame 12 The first parameter passed to "asp!execute()" is a pointer to the CTempate class.

Note: You could use the "kpn" command instead of "kvn" to see the parameters mane/value passed.

 

To dump the class CTemplate, do the following:

 

0:021> dt CTemplate 01a11fa0 -r

+0x000 __VFN_table : 0x749f6a40

+0x004 m_pLinkNext : 0x74a31978

+0x000 __VFN_table : 0x749f2fac

+0x004 m_pLinkNext : 0x01a11fa0

.....

.....

+0x098 m_rgpFilemaps : 0x01c72be0 -> 0x01a51e90

+0x000 m_szPathInfo : 0x01c72c08 "/IISDebugLabs/App/initcom.asp"

+0x004 m_szPathTranslated : 0x01c72c30 "C:\IISDEBUGLABS\WWW\APP\INITCOM.ASP"

+0x008 m_pfilemapParent : (null)

 

.....

.....  

 

 

This shows that the faulting thread was running the ASP page: "C:\IISDEBUGLABS\WWW\APP\INITCOM.ASP"

 

To verify that the symbols are lined up properly for theh componsnt, issue this command.

 

 

 

0:016> lmv mbadcom

start end module name

02030000 02038000 badcom (pdb symbols) c:\iisdebuglabs\symbols\pub\badcom.pdb

Loaded symbol image file: badcom.dll

Image path: c:\IISDEB~1\www\app\badcom.dll

Timestamp: Tue Jun 10 22:45:51 2003 (3EE697DF) Checksum: 0000F229

File version: 1.0.0.1

Product version: 1.0.0.1

File flags: 0 (Mask 3F)

File OS: 4 Unknown Win32

File type: 2.0 Dll

File date: 00000000.00000000

CompanyName:

ProductName: badCOM

Module InternalName: badCOM

OriginalFilename: badCOM.DLL

ProductVersion: 1, 0, 0, 1

FileVersion: 1, 0, 0, 1

FileDescription: badCOM Module

LegalCopyright: Copyright 2003

 

 

3) with Private Symbols "badCom.dll"

 

The stack backtrace of the thread that caused the Unhandled Exception would look like:

 

 

0:021> kvn50

# ChildEBP RetAddr Args to Child

00 01e4f0d4 0203327e 00000057 00000001 00000000 KERNEL32!RaiseException+0x56 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\windows\base\client\thread.c @ 1382]

01 01e4f0f4 02032aaa 00000001 65723d73 31765f32 badcom!doRE2+0x2a (CONV: stdcall) [H:\nT\PRIVATE\inet\iis\svcs\w3\gateways\comDBG\scenarios.cpp @ 697]

02 01e4f124 779d7b9d 0040bfd8 00408a60 00000000 badcom!CScenarios::processSc+0x260 (CONV: stdcall) [H:\nT\PRIVATE\inet\iis\svcs\w3\gateways\comDBG\scenarios.cpp @ 183]

03 01e4f140 77a22c42 0040bfd8 00000024 00000004 OLEAUT32!tPushValJmpTab+0xf5 [D:\OA\src\dispatch\WIN32\i386\invoke.asm @ 340]

04 01e4f1d0 020325d0 000c020c 0040bfd8 00000003 OLEAUT32!CTypeInfo2::Invoke+0x244 (CONV: stdcall) [D:\OA\src\typelib2\tiinvoke.cpp @ 629]

05 01e4f1f8 6b61dff3 0040bfd8 00000003 6b659388 badcom!ATL::IDispatchImpl::Invoke+0x41 (CONV: stdcall) [c:\nt\public\sdk\inc\atl30\atlcom.h @ 4093]

06 01e4f274 6b62171a 004085e8 0040bfd8 00000003 vbscript!CatchIDispatchInvoke+0x9e (CONV: stdcall) [E:\vbscript\src\core\callout.h @ 111]

07 01e4f384 6b604038 0009001f 0000023f 004084e0 vbscript!InvokeDispatch+0x330 (FPO: [EBP 0x6b659388] [7,60,4]) (CONV: stdcall) [E:\vbscript\src\vbscript\var.cpp @ 1211]

08 01e4f3c8 6b603156 004084e0 0040bfd8 00000003 vbscript!GetDispatchDispID+0x1cc (FPO: [EBP 0x01e4f954] [4,3,4]) (CONV: stdcall) [E:\vbscript\src\vbscript\var.cpp @ 972]

09 01e4f998 6b601ef7 00000009 01e4fa8c 00000000 vbscript!CScriptRuntime::Run+0x3b8d (CONV: thiscall) [E:\vbscript\src\vbscript\interp.cpp @ 3347]

0a 01e4f9c8 6b601c5c 00000000 00000000 00000000 vbscript!CScriptRuntime::Init+0x2e1 (FPO: [EBP 0x6b658a10] [6,0,4]) (CONV: thiscall) [E:\vbscript\src\vbscript\interp.cpp @ 904]

0b 01e4fb08 6b606fc5 004084e0 6b606ef1 0040bf68 vbscript!CScriptEntryPoint::Call+0x76 (FPO: [5,58,2]) (CONV: thiscall) [E:\vbscript\src\vbscript\entrypnt.cpp @ 40]

0c 01e4fb54 749f2e70 01911e90 6b610c9a 00000000 vbscript!CSession::GetGlobalEntryPoint+0x25 (FPO: [3,0,0]) (CONV: thiscall) [E:\vbscript\src\core\wrapper.cpp @ 485]

0d 01e4fb6c 749f3af0 01912060 01912060 012d1e90 asp!CResponse::Release+0x18 (FPO: [1,0,1]) (CONV: stdcall) [D:\nt\private\inet\iis\svcs\cmp\asp\response.cpp @ 1716]

0e 01e4fb9c 74a22f5b 00000000 74a32c70 77e873a1 asp!CActiveScriptEngine::TryCall+0x15 (FPO: [Non-Fpo]) (CONV: thiscall) [D:\nt\private\inet\iis\svcs\cmp\asp\scrptmgr.cpp @ 2040]

0f 01e4fbe0 749f3a72 00000000 01e4fc28 749f593d asp!CActiveScriptEngine::Call+0x10c (FPO: [Non-Fpo]) (CONV: thiscall) [D:\nt\private\inet\iis\svcs\cmp\asp\scrptmgr.cpp @ 2005]

10 01e4fbec 749f593d 01e4fc4c 00000000 00000000 asp!CallScriptFunctionOfEngine+0x48 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\inet\iis\svcs\cmp\asp\exec.cpp @ 1394]

11 01e4fc28 749f54c8 01a11fa0 01591e90 01e4fc94 asp!ExecuteRequest+0x19e (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\inet\iis\svcs\cmp\asp\exec.cpp @ 326]

12 01e4fc70 749fcf9b 01a11fa0 01591e90 01e4fc94 asp!Execute+0x17e (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\inet\iis\svcs\cmp\asp\exec.cpp @ 190]

13 01e4fcc0 749fcc37 00000000 000bd6f8 01e4fd58 asp!CHitObj::ViperAsyncCallback+0x452 (FPO: [Non-Fpo]) (CONV: thiscall) [D:\nt\private\inet\iis\svcs\cmp\asp\hitobj.cpp @ 2487]

14 01e4fcd8 787c214a 00000000 77acd455 01b51e90 asp!CViperAsyncRequest::OnCall+0x3f (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\inet\iis\svcs\cmp\asp\viperint.cpp @ 194]

15 01e4fce0 77acd455 01b51e90 77aa71a0 00000000 COMSVCS!STAActivityWorkHelper+0xa (FPO: [1,0,0]) (CONV: stdcall) [.\stathred.cpp @ 1321]

16 01e4fd24 77acd318 000751d8 00085860 787c2140 ole32!EnterForCallback+0x6a (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\ole32\com\dcomrem\crossctx.cxx @ 1758]

17 01e4fe50 77acd1dd 00085860 787c2140 01b51e90 ole32!SwitchForCallback+0x12b (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\ole32\com\dcomrem\crossctx.cxx @ 1643]

18 01e4fe78 77aac61a 00085860 787c2140 01b51e90 ole32!PerformCallback+0x50 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\ole32\com\dcomrem\crossctx.cxx @ 1558]

19 01e4fed4 77ad1185 000757c0 787c2140 01b51e90 ole32!CObjectContext::InternalContextCallback+0xf5 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\ole32\com\dcomrem\context.cxx @ 3942]

1a 01e4fef4 787beff3 000757c0 787c2140 01b51e90 ole32!CObjectContext::DoCallback+0x1a (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\ole32\com\dcomrem\context.cxx @ 3798]

1b 01e4ff24 787c11ad 00010007 00000000 01e4ffec COMSVCS!STAActivityWork::DoWork+0x73 (FPO: [0,4,2]) (CONV: thiscall) [..\inc\STAThred.h @ 340]

1c 01e4ffb4 77e887dd 00b5f364 00010007 00000000 COMSVCS!STAThread::STAThreadWorker+0x465 (FPO: [EBP 0x01e4ffec] [1,31,4]) (CONV: stdcall) [.\stathred.cpp @ 628]

1d 01e4ffec 00000000 787c0d48 00b5f364 00000000 KERNEL32!BaseThreadStart+0x52 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\windows\base\client\support.c @ 460]

 

 

Notice in frame 01 and 02 the line of the code as well as the name and location of the source code. Going back to the source code in Scenarios.cpp:

 

Line 183 looks like

 

STDMETHODIMP CScenarios::processSc(VARIANT *pVar)

{

.....

.....

else if (!strncmp(szS, "re2", 3))

{

return doRE2(lpEcb, Variation); //Line 183

}

.....

.....

}

 

Line 697 looks like

 

 

DWORD doRE2(int Variation)

{

DWORD dwThreadID;

HANDLE hThread;

if (1 == Variation)

{

RaiseException(ERROR_INVALID_PARAMETER, EXCEPTION_NONCONTINUABLE, 0, NULL); //line 697

}

if (2 == Variation)

{

hThread = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE)RENonContinuable, NULL, 0, &dwThreadID);

}

return S_OK;

}

 

 

 

 

 


		

 

1) Unknown Exception in a spawned thread: (Variation 2)

1- Debug Annotation

 

1) Without symbols

 

a) The faulting Stack

 

The stack backtrace of the thread that caused the Unhandled Exception would look like:

 

0:006> kvn50

# ChildEBP RetAddr Args to Child

WARNING: Stack unwind information not available. Following frames may be wrong.

00 0214ffa0 020332bd 00000057 00000001 00000000 KERNEL32!RaiseException+0x37

01 0214ffec 00000000 020332af 00000000 00000000 badcom!DllUnregisterServer+0x1540

 

 

In this stack backtrace, it is clear that the culprit is "badCom.dll". So it is enough to tell the customer to contact the dll vendor to fix it. If it is an in-house component and the customer would like help

from Microsoft, they should open an advisory case to troubleshoot the issue further.

 

b) The registers values

 

 

0:006> r

eax=0214ff50 ebx=00000000 ecx=00000101 edx=ffffffff esi=00000000 edi=00070000

eip=77e9e8bb esp=0214ff48 ebp=0214ffa0 iopl=0 nv up ei pl zr na po nc

cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246

KERNEL32!RaiseException+37:

77e9e8bb e988c60100 jmp KERNEL32!GetThreadPriorityBoost+0x105 (77ebaf48)

 

 

c) The disassembly code

 

0:006> u eip

KERNEL32!RaiseException+37:

77e9e8bb e988c60100 jmp KERNEL32!GetThreadPriorityBoost+0x105 (77ebaf48)

77e9e8c0 8b4510 mov eax,[ebp+0x10]

77e9e8c3 83f80f cmp eax,0xf

77e9e8c6 0f8774c60100 jnbe KERNEL32!GetThreadPriorityBoost+0xfd (77ebaf40)

77e9e8cc 8945c0 mov [ebp-0x40],eax

77e9e8cf 8bc8 mov ecx,eax

77e9e8d1 48 dec eax

77e9e8d2 85c9 test ecx,ecx

 

 

2) With symbols including public symbols of "badCom.dll"

 

First, we need to add the private symbol path(company wide symbols) as well as public symbols of our dll

a) Using the GUI:

- Click "File"

- Click "Symbol File Path"

- Type in SRV*C:\LabSymbols*\\symbols\symbols;C:\IISDebugLabs\symbols\Pub and hit Enter

b) Using the ".sympath+" command:

.sympath+ SRV*C:\LabSymbols*\\symbols\symbols;C :\IISDebugLabs\symbols\Pub

 

 

The stack backtrace of the thread that caused the Unhandled Exception would look like:

 

0:006> kvn50

# ChildEBP RetAddr Args to Child

WARNING: Stack unwind information not available. Following frames may be wrong.

00 0214ffa0 020332bd 00000057 00000001 00000000 KERNEL32!RaiseException+0x37 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\windows\base\client\thread.c @ 1382]

01 0214ffec 00000000 020332af 00000000 00000000 badcom!RENoncontinuable+0xe  

 

 

Now, with the public symbols lined up, we see that the function call that raised the exception is to "ReNoncontinuable"

 

Again, In this call stack, it is clear that the culprit is "badCom.dll". So it is enough to tell the customer to contact the dll vendor to fix it. If it is an in-house component and the customer would like help

from Microsoft, they should open an advisory case to troubleshoot the issue further.

 

 

To verify that the symbols are lined up properly for our extension, issue this command.

 

 

 

 

0:016> lmv mbadcom

start end module name

02030000 02038000 badcom (pdb symbols) c:\iisdebuglabs\symbols\pub\badcom.pdb

Loaded symbol image file: badcom.dll

Image path: c:\IISDEB~1\www\app\badcom.dll

Timestamp: Tue Jun 10 22:45:51 2003 (3EE697DF) Checksum: 0000F229

File version: 1.0.0.1

Product version: 1.0.0.1

File flags: 0 (Mask 3F)

File OS: 4 Unknown Win32

File type: 2.0 Dll

File date: 00000000.00000000

CompanyName:

ProductName: badCOM

Module InternalName: badCOM

OriginalFilename: badCOM.DLL

ProductVersion: 1, 0, 0, 1

FileVersion: 1, 0, 0, 1

FileDescription: badCOM Module

LegalCopyright: Copyright 2003

 

 

3) with Private Symbols "badCom.dll"

The stack backtrace of the thread that caused the Unhandled Exception would look like:

 

 

0:006> kvn50

# ChildEBP RetAddr Args to Child

WARNING: Stack unwind information not available. Following frames may be wrong.

00 0214ffa0 020332bd 00000057 00000001 00000000 KERNEL32!RaiseException+0x37 (FPO: [Non-Fpo]) (CONV: stdcall) [D:\nt\private\windows\base\client\thread.c @ 1382]

01 0214ffec 00000000 020332af 00000000 00000000 badcom!RENoncontinuable+0xe (CONV: stdcall) [H:\nT\PRIVATE\inet\iis\svcs\w3\gateways\comDBG\scenarios.cpp @ 720]

 

 

Notice in frame 01 the line of the code as well as the name and location of the source code. Going back to the source code in Scenarios.cpp:

 

Line 720 looks like

 

DWORD RENoncontinuable()

{

RaiseException(ERROR_INVALID_PARAMETER, 0, 0, NULL); //line 720

return 1;

}

 


- Microsoft Confidential -