########################################################################
##                                                                    ##
## Oracle 11g 11.1.0.7.0 Patch Set Install Response File Template     ##
## --------------------------------------------------------------     ##
##                                                                    ##
## Copyright(c) Oracle Corporation 2005. All rights reserved.         ##
##                                                                    ##
## Specify values for the variables listed below to customize         ##
## your installation.                                                 ##
##                                                                    ##
## Each variable is associated with a comment which explains          ##
## how the variable is used and what effect it will have on           ##
## your installation.  The default setting of the                     ##
## DEPENDENCY_LIST variables installs the products included           ##
## in a Typical install.                                              ##
##                                                                    ##
## Please specify values for the specific variable types              ##
## in the following formats:                                          ##
##                                                                    ##
##         String       "Sample Value"                                ##
##         Boolean      true or false                                 ##
##         Number       1000                                          ##
##         StringList   {"String value 1","String Value 2"}           ##
##                                                                    ##
## The values that are given as <Value Required> need to be           ##
## specified for a silent installation to be successful.              ##
##                                                                    ##
##                                                                    ##
########################################################################


RESPONSEFILE_VERSION=2.2.1.0.0


#-----------------------------------------------------------------------------
# Name          : UNIX_GROUP_NAME
# Datatype      : String
# Description   : Unix group which will have write permissions on the
#                 installer inventory directory
# Valid values  : Any Unix group to which the current user belongs
# value : None
# Mandatory     : No
#-----------------------------------------------------------------------------

UNIX_GROUP_NAME=<Value Unspecified>

#-----------------------------------------------------------------------------
# Name          : FROM_LOCATION
# Datatype      : String
# Description   : Complete path of the products.xml file from the staging area
#                 where you untared your patch set. 
# Valid values  : Full path ending in "products.xml"
# Example value : "/patchset/oracle11g/stage/products.xml"
# Default value : "../stage/products.xml"
# Mandatory     : Yes
#-----------------------------------------------------------------------------

FROM_LOCATION=<Value Required>

#-----------------------------------------------------------------------------
# Name          : NEXT_SESSION_RESPONSE
# Datatype      : String
# Description   : Optionally specifies the full path of next session's
#                 response file. If only a file name is specified, the
#                 response file is retrieved from <TEMP>\oraInstall
#                 directory. This variable is only active if
#                 NEXT_SESSION is set to true.
# Valid values  : Full path to a valid response file or a response file name
# Example value : "/tmp/install.rsp"
# Default value : None
# Mandatory     : No
#-----------------------------------------------------------------------------

NEXT_SESSION_RESPONSE=<Value Unspecified>

#-----------------------------------------------------------------------------
# Name          : ORACLE_HOME
# Datatype      : String
# Description   : Full path of existing Oracle Home directory to use for 
#                 installing Oracle patch set, i.e. the target "Oracle Home"
# Valid values  : Directory path
# Example value : "/u01/app/oracle/products/11.1.0.7.0"
# Default value : none
# Mandatory     : Yes
#-----------------------------------------------------------------------------

ORACLE_HOME=<Value Required>

#-----------------------------------------------------------------------------
# Name          : ORACLE_HOME_NAME
# Datatype      : String
# Description   : Oracle Home Name. Used in creating folders and services.
# Valid values  : any string not used for any Oracle HOME
# Example value : ORACLE_HOME_NAME = "OHOME1"
# Default value : OHOME1 
# Mandatory     : Yes
#-----------------------------------------------------------------------------

ORACLE_HOME_NAME=<Value Required>

#-----------------------------------------------------------------------------
# Name          : TOPLEVEL_COMPONENT
# Datatype      : StringList
# Description   : Top-level product and version to install
                  The format is of the form {"<Internal name>", "<version>"}
# Note          : DO NOT CHANGE THE DEFAULT VALUE.
#                 To install different top-level products, use one of the
#                 other response file templates
# Mandatory     : Yes
#-----------------------------------------------------------------------------

TOPLEVEL_COMPONENT={"oracle.patchset.db","11.1.0.7.0"}

#-----------------------------------------------------------------------------
# Name          : SHOW_SPLASH_SCREEN
# Datatype      : Boolean
# Description   : Set to true to show the initial splash screen of the
#                 installer
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_SPLASH_SCREEN=false

#-----------------------------------------------------------------------------
# Name          : SHOW_WELCOME_PAGE
# Datatype      : Boolean
# Description   : Set to true to show the Welcome page of the installer
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_WELCOME_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_COMPONENT_LOCATIONS_PAGE
# Datatype      : Boolean
# Description   : Set to true to show the component locations page in
#                 the installer.  This page only appears if there are
#                 products whose install directories can be changed.
#                 If you set this to false you will prevent the user
#                 from specifying alternate install directories.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_COMPONENT_LOCATIONS_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_CUSTOM_TREE_PAGE
# Datatype      : Boolean
# Description   : Set to true to display the available products
#                 selection tree during a Custom install
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_CUSTOM_TREE_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_SUMMARY_PAGE
# Datatype      : Boolean
# Description   : Set to true to display the Summary page in the
#                 installer
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_SUMMARY_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_INSTALL_PROGRESS_PAGE
# Datatype      : Boolean
# Description   : Set to true to show the install progress screen.
#                 This screen shows detailed status of the
#                 installation, which file is being copied, which link
#                 action is being performed, etc.  It also shows
#                 percentage complete.
# Valid values  : true, false
# Default value : true
# Mandatory     : Yes
#-----------------------------------------------------------------------------

SHOW_INSTALL_PROGRESS_PAGE=true

#-----------------------------------------------------------------------------
# Name          : SHOW_REQUIRED_CONFIG_TOOL_PAGE
# Datatype      : Boolean
# Description   : Set to true to display the status screen for
#                 required configuration tools.  This screen shows the
#                 status of each tool along with detailed information
#                 in the event of tool failure.
# Valid values  : true, false
# Default value : true
# Mandatory     : Yes
#-----------------------------------------------------------------------------

SHOW_REQUIRED_CONFIG_TOOL_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_OPTIONAL_CONFIG_TOOL_PAGE
# Datatype      : Boolean
# Description   : Set to true to display the optional configuration
#                 tool page which allows you to launch optional
#                 configuration tools and view details status,
#                 including details on any failures.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_OPTIONAL_CONFIG_TOOL_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_CONFIG_TOOL_PAGE
# Datatype      : Boolean
# Description   : Set to true if the config assistants page in OUI needs to be
#                 shown. This page shows the list of configuration assistants
#                 that are part of this installation and are configured to
#                 launch automatically.
#                 It shows the status of each assistant, including any failures 
#                 with detailed information on why it failed.
# Valid values  : true, false
# Default value : false
# Example value : SHOW_CONFIG_TOOL_PAGE = true
#-----------------------------------------------------------------------------

SHOW_CONFIG_TOOL_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_XML_PREREQ_PAGE
# Datatype      : Boolean
# Description   : This variable determines whether or not to show the prereq
#                 page.
# Valid values  : true, false
# Default value : false
# Example value : SHOW_XML_PREREQ_PAGE = true
#-----------------------------------------------------------------------------

SHOW_XML_PREREQ_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_RELEASE_NOTES
# Datatype      : Boolean
# Description   : Set to true to show the release notes screen from
#                 which Release Notes can be viewed.  NOTE, 11.1.0.7.0 does
#                 not use any release notes so this will not be
#                 relevant for an 11.1.0.7.0 install.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_RELEASE_NOTES=false

#-----------------------------------------------------------------------------
# Name          : SHOW_END_OF_INSTALL_MSGS
# Datatype      : Boolean
# Description   : Set to true if the text on end of install screen is to be
#                 shown. The text is always available under
#                 <Oracle Home>/install/readme.txt.
# Valid values  : true, false
# Default value : true
# Example value : SHOW_END_OF_INSTALL_MSGS = true
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_END_OF_INSTALL_MSGS=true

#-----------------------------------------------------------------------------
# Name          : SHOW_ROOTSH_CONFIRMATION
# Datatype      : Boolean
# Description   : Set to true to display the dialog which prompts the
#                 user to run root.sh before a database is created.
#                 If this is set to false, the root.sh script can be
#                 run manually after installation, but the Database
#                 Configuration Assistant may not have permissions to
#                 update the oratab file if this is the first Oracle
#                 installation on the machine.
# Valid values  : true, false
# Default value : true
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_ROOTSH_CONFIRMATION=true

#-----------------------------------------------------------------------------
# Name          : SHOW_END_SESSION_PAGE
# Datatype      : Boolean
# Description   : Set to true to display end session dialog.  This
#                 page shows whether the installation is successful.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_END_SESSION_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_EXIT_CONFIRMATION
# Datatype      : Boolean
# Description   : Set to true to display dialog for confirming exit.
#                 If set to false, installer will exit without
#                 prompting.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_EXIT_CONFIRMATION=false

#-----------------------------------------------------------------------------
# Name          : NEXT_SESSION
# Datatype      : Boolean
# Description   : Set to true to allow users to go back to the File
#                 Locations page for another installation.  If this is
#                 set to true, NEXT_SESSION_RESPONSE should be used to
#                 indicate location of the second reponse file.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

NEXT_SESSION=false

#-----------------------------------------------------------------------------
# Name          : NEXT_SESSION_ON_FAIL
# Datatype      : Boolean
# Description   : Set to true to allow users to go back to the File
#                 Locations page for another installation even if the
#                 first installation failed.  This flag is only
#                 relevant if NEXT_SESSION is set to true.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

NEXT_SESSION_ON_FAIL=false

#-----------------------------------------------------------------------------
# Name          : SHOW_DEINSTALL_CONFIRMATION
# Datatype      : Boolean
# Description   : Set to true if deinstall confimation is needed during a
#                 deinstall session.
# Valid values  : true, false
# Default value : false
# Example value : SHOW_DEINSTALL_CONFIRMATION = true
#-----------------------------------------------------------------------------

SHOW_DEINSTALL_CONFIRMATION=false

#-----------------------------------------------------------------------------
# Name          : SHOW_DEINSTALL_PROGRESS
# Datatype      : Boolean
# Description   : Set to true if deinstall progress is needed during a deinstall
#                 session.
# Valid values  : true, false
# Default value : false
# Example value : SHOW_DEINSTALL_PROGRESS = true
#-----------------------------------------------------------------------------

SHOW_DEINSTALL_PROGRESS=false

#-----------------------------------------------------------------------------
# Name          : ACCEPT_LICENSE_AGREEMENT
# Datatype      : Boolean
# Description   : By setting this variable to true, you are accepting the
#                 license agreement. This variable is used only for silent
#                 installations.
# Valid values  : true, false
# Default value : true
# Example       : ACCEPT_LICENSE_AGREEMENT = true
#-----------------------------------------------------------------------------

ACCEPT_LICENSE_AGREEMENT=true

#-----------------------------------------------------------------------------
# Name          : RESTART_SYSTEM
# Datatype      : Boolean
# Description   : Set to true to allow automatic restart of the system, if set
#                 to false then installer will exit without restarting, no exit
#                 confirmation dialog is shown
# Valid values  : true, false
# Default value : true
# Example value : RESTART_SYSTEM = false
#-----------------------------------------------------------------------------

RESTART_SYSTEM=<Value Unspecified>

#-----------------------------------------------------------------------------
# Name          : CLUSTER_NODES
# Datatype      : StringList
# Description   : This variable represents the cluster node names selected by
#                 the user for installation.
# Valid values  : {"node","node2"}
# Default value : none
# Example value : CLUSTER_NODES = {"node1"}
#-----------------------------------------------------------------------------

CLUSTER_NODES=<Value Unspecified>

#-----------------------------------------------------------------------------
# Name          : OUI_HOSTNAME
# Datatype      : String
# Description   : This variable holds the hostname of the system as set by the
#                  user.
# Valid values  : any string
# Default value : none
# Example       : OUI_HOSTNAME = host1
#-----------------------------------------------------------------------------

OUI_HOSTNAME=<Value Unspecified>

#-----------------------------------------------------------------------------
# Name          : REMOVE_HOMES
# Datatype      : StringList
# Description   : List of the homes to be removed during a deinstall session.
#                 Each home is represented by its full path.
# Valid values  : {"string1","string2",...}
# Default value : none
# Example value : REMOVE_HOMES = {<path_of_home1>,<path_of_home2>, ...}
#-----------------------------------------------------------------------------

REMOVE_HOMES=<Value Unspecified>

#-----------------------------------------------------------------------------
# Name          : COMPONENT_LANGUAGES
# Datatype      : StringList
# Description   : Languages in which the components will be installed.
#                 The following choices are available. The value should
#                 contain only one of these choices.
#                 The choices are of the form Internal Name : External name.
#                 Please use the internal name while specifying the value.
# Valid values  :
#    en,   : English
#    fr,   : French
#    ar,   : Arabic
#    bn,   : Bengali
#    pt_BR,   : Brazilian Portuguese
#    bg,   : Bulgarian
#    fr_CA,   : Canadian French
#    ca,   : Catalan
#    hr,   : Croatian
#    cs,   : Czech
#    da,   : Danish
#    nl,   : Dutch
#    ar_EG,   : Egyptian
#    en_GB,   : English (United Kingdom)
#    et,   : Estonian
#    fi,   : Finnish
#    de,   : German
#    el,   : Greek
#    iw,   : Hebrew
#    hu,   : Hungarian
#    is,   : Icelandic
#    in,   : Indonesian
#    it,   : Italian
#    ja,   : Japanese
#    ko,   : Korean
#    es,   : Latin American Spanish
#    lv,   : Latvian
#    lt,   : Lithuanian
#    ms,   : Malay
#    es_MX,   : Mexican Spanish
#    no,   : Norwegian
#    pl,   : Polish
#    pt,   : Portuguese
#    ro,   : Romanian
#    ru,   : Russian
#    zh_CN,   : Simplified Chinese
#    sk,   : Slovak
#    sl,   : Slovenian
#    es_ES,   : Spanish
#    sv,   : Swedish
#    th,   : Thai
#    zh_TW,   : Traditional Chinese
#    tr,   : Turkish
#    uk,   : Ukrainian
#    vi,   : Vietnamese
# Default value : en
# Mandatory     : No
#-----------------------------------------------------------------------------

COMPONENT_LANGUAGES={"en"}

#-----------------------------------------------------------------------------
# End of GENERAL SESSION section
#-----------------------------------------------------------------------------
#
# Oracle11g R1 Patch 1 
#

#-----------------------------------------------------------------------------
# Name          : sl_userNodelist
# Datatype      : StringList
# Description   : This variable should only be used if cluster hardware and
#                 software is configured according to specifications for
#                 Real Application Clusters in the Oracle11g Installation Guide.
#                 Specify a list of nodes on which this installation should
#                 be duplicated.
# Valid values  : Any list of machine names which are part of a cluster along
#                 with the machine where the installer is being run.
# Example value : {"CLUST1","CLUST2","CLUST3"}
# Default value : {}
# Mandatory     : No
#-----------------------------------------------------------------------------

sl_userNodeList=<Value Unspecified>

###############################################################################
#                                                                             #
# Dialog: Oracle Direct Connect Identification                                #
# -----------------------------------------                                   #
#
# Oracle direct connect allows you to associate your configuration information#
# with your Metalink account. When you log your service request with Oracle,  #
# you will be able to link the request with the pre-collected configuration   #
# in this ORACLE HOME                                                         #
###############################################################################

#------------------------------------------------------------------------------
# Name       : METALINK_USERNAME
# Datatype   : String
# Description: Metalink Account Username.
#
# Prerequisites for setting this variable:
#  n_configurationOption=1, 2
#  n_performUpgrade=0
#  n_dbType = 1 or 2
#  b_acceptLicense=true
#  b_useRegistration = true
#
#  Example   : s_metaLinkUser="metalink"
#------------------------------------------------------------------------------
METALINK_USERNAME=<Value Unspecified>

#------------------------------------------------------------------------------
# Name       : METALINK_PASSWORD
# Datatype   : String
# Description: Stores the Metalink Account Username password.
#
# Prerequisites for setting this variable:
#  n_configurationOption=1, 2
#  n_performUpgrade=0
#  n_dbType = 1 or 2
#  s_userName is set
#
# Example    : s_proxyPassword="password"
#------------------------------------------------------------------------------
METALINK_PASSWORD=<Value Unspecified>
#------------------------------------------------------------------------------
# Name       : PROXY_HOST
# Datatype   : String
# Description: Stores the Proxy server name. Length should be greater than zero.
#
# Prerequisites for setting this variable:
#  n_configurationOption=1, 2
#  n_performUpgrade=0
#  n_dbType = 1 or 2
#  b_proxyused = true
#
# Example    : s_serverName="stacb16.us.oracle.com" 
#------------------------------------------------------------------------------
PROXY_HOST=<Value Unspecified>

#------------------------------------------------------------------------------
# Name       : PROXY_PORT
# Datatype   : String
# Description: Stores the proxy port number. Should be Numeric and atleast 2 chars.
#
# Prerequisites for setting this variable:
#  n_configurationOption=1, 2
#  n_performUpgrade=0
#  n_dbType = 1 or 2
#  b_proxyused = true
#  s_serverName is set
#
# Example    : s_portNumber="25" 
#------------------------------------------------------------------------------
PROXY_PORT=<Value Unspecified>

#------------------------------------------------------------------------------
# Name       : PROXY_USER
# Datatype   : String
# Description: Stores the proxy user name. Leave s_userName and s_proxyPassword 
# blank if your proxy server requires no authentication.
#
# Prerequisites for setting this variable:
#  n_configurationOption=1, 2
#  n_performUpgrade=0
#  n_dbType = 1 or 2
#  b_proxyused = true
#
# Example    : s_userName="username" 
#------------------------------------------------------------------------------
PROXY_USER=<Value Unspecified>

#------------------------------------------------------------------------------
# Name       : PROXY_PWD
# Datatype   : String
# Description: Stores the proxy password. Leave s_userName and s_proxyPassword 
# blank if your proxy server requires no authentication.
#
# Prerequisites for setting this variable:
#  n_configurationOption=1, 2
#  n_performUpgrade=0
#  n_dbType = 1 or 2
#  b_proxyused = true
#  s_userName is set
#
# Example    : s_proxyPassword="password" 
#------------------------------------------------------------------------------
PROXY_PWD=<Value Unspecified>

#------------------------------------------------------------------------------
# Name		: SECURITY_UPDATES_VIA_METALINK
# Datatype	: Boolean
# Description	: This is set to true to enable the user to set the password for
# Metalink credentials.
# Valid values	: true,false
# Default value	: false
# Mandatory	: No
#------------------------------------------------------------------------------
SECURITY_UPDATES_VIA_METALINK=<Value Unspecified>

#------------------------------------------------------------------------------
# Name		: DECLINE_SECURITY_UPDATES
# Datatype	: Boolean
# Description   : This is set to false,if user don't want to give any proxy
# details for connection.
# Metalink credentials.
# Valid values  : true,false
# Default value : false
# Mandatory     : No
#------------------------------------------------------------------------------
DECLINE_SECURITY_UPDATES=<Value Unspecified>

#------------------------------------------------------------------------------
# Name 		: COLLECTOR_UPGRADE
# Datatype	: Boolean
# Description   : This is set to true,if OCM is already configured.
# Metalink credentials.
# Valid values  : true,false
# Default value : false
# Mandatory     : No
#------------------------------------------------------------------------------
COLLECTOR_UPGRADE=<Value Unspecified>

#------------------------------------------------------------------------------
# Name		: COLLECTOR_IGNORE_CONFIGURATION
# Datatype      : Boolean
# Description   : This is set to true to ignore OCM configuration page display.
# Metalink credentials.
# Valid values  : true,false
# Default value : false
# Mandatory     : No
#------------------------------------------------------------------------------
COLLECTOR_IGNORE_CONFIGURATION=<Value Unspecified>

#------------------------------------------------------------------------------
# Name		: COLLECTOR_IGNORE_FAILURES
# Datatype      : Boolean
# Description   : This is set to true to ignore OCM related errors.
# Metalink credentials.
# Valid values  : true,false
# Default value : false
# Mandatory     : No
#------------------------------------------------------------------------------
COLLECTOR_IGNORE_FAILURES=<Value Unspecified>

#------------------------------------------------------------------------------
# Name		: COLLECTOR_USE_OBFUSCATED_PASSWORDS
# Datatype      : Boolean
# Description   : This is set to true to obfuscate the passwords.
# Valid values  : true,false
# Default value : false
# Mandatory     : No
#------------------------------------------------------------------------------
COLLECTOR_USE_OBFUSCATED_PASSWORDS=<Value Unspecified>

#------------------------------------------------------------------------------
# Name		: COLLECTOR_RESPONSE_FILE
# Datatype      : Boolean
# Description   : This is set to true to use the existing response file for the
# configuration.
# Valid values  : true,false
# Default value : false
# Mandatory     : No
#------------------------------------------------------------------------------
COLLECTOR_RESPONSE_FILE=<Value Unspecified>