Command Summary
      Lists all of the incidents associated with the current ADR home.   
      Output is limited to the number of incidents requested.
      
    Input Requirements
      o Choose an output mode for incidents. BASIC is the default.
        - BASIC displays only basic incident information (the INCIDENT_ID, 
          PROBLEM_ID, and CREATE_TIME fields
          It does not display flood-controlled incidents.
        - BRIEF displays all information related to the incidents
          It includes flood-controlled incidents
        - DETAIL displays all information for the incidents (as with BRIEF 
          mode) as well as information about incident dumps
          It includes flood-controlled incidents
      o A maximun number of incidents to be returned is prompted for 
        - Default is 50	
    
    Ouput Details
      o A list of incidents up to the number requested will be displayed
      
    

show_incident_all %%MODE%% %%NUM_INC%% 

    Command Summary
      Creates a new package. ADRCI automatically assigns the package number 
      for the new package.
      
    Input Requirements
      o Incident ID is required
        - Default is 0 which will return an error
    
    Ouput Details
      o Package number created will be displayed
      
    

ips_create %%INC_ID%%

    Command Summary
      This command shows the current status of Procwatcher. 
      
    Input Requirements
      o None
    
    Ouput Details
      o Current status of Procwatcher
      
    

%%DA_PROCWATCHER_DIR%%/prw.sh stat

    Command Summary
      This command starts Procwatcher.
      
    Input Requirements
      o None
    
    Ouput Details
      o Confirmation that Procwatcher was started
      
    

%%DA_PROCWATCHER_DIR%%/prw.sh start

    Command Summary
      This command stops Procwatcher. 
      
    Input Requirements
      o None
    
    Ouput Details
      o Confirmation that Procwatcher was terminated
      
    

%%DA_PROCWATCHER_DIR%%/prw.sh stop

    Command Summary
      This command packages Procwatcher files. 
      
    Input Requirements
      o None
    
    Ouput Details
      o Confirmation that Procwatcher files have been packaged
      
    

%%DA_PROCWATCHER_DIR%%/prw.sh pack
    echo DA_FILE_COLLECTED=$PWD/Procwatcher_Files_.*.zip
    

    Command Summary
      This command collects ILOM snapshot data previously generated.
      
    Input Requirements
      o Full directory path where the ILOM zip file is located
      o Node name (without "-ilom")
    
    Ouput Details
      o Confirms that the snapshot was located
  
    

#!/bin/sh
       if [ "x%%ILOM_ZIPDIR%%" = "x" -o  "x%%NODE_NAME%%" = "x" ]; then
       echo "ERROR: Please enter a value for both ILOM zip directory and Node Name."
       else
         if [ -d %%ILOM_ZIPDIR%% ]; then
         echo DA_FILE_COLLECTED=%%ILOM_ZIPDIR%%/%%NODE_NAME%%-ilom.*.zip
         else
         echo "ERROR: Directory Invalid. You must enter a valid directory path."
         fi
       fi
    

    Command Summary
      This command runs Exachk in non-interactive mode including root
      privileged checks.
      
    Input Requirements
      o Full directory path where Exachk is installed
      o Full path of the CRS_HOME
    
    Ouput Details
      o Results of the Exachk, including root privileged checks

    

#!/bin/sh
    if [ "x%%Exachk_DIR%%" = "x" -o  "x%%CRS_HOME%%" = "x" ]; then
    echo "ERROR: Please enter a value for both Exachk directory and CRS_HOME."
    else
      if [ -d %%CRS_HOME%% ]; then
        if [ -d %%Exachk_DIR%% ]; then
        export CRS_HOME=%%CRS_HOME%%
        %%Exachk_DIR%%/Exachk -s
        else
        echo "ERROR: Please enter a valid directory where Exachk is installed."
        fi
      else
      echo "ERROR: Please enter a valid CRS_HOME."
      fi
    fi
    

    Command Summary
      This command runs Exachk in non-interactive mode without root
      privileged checks.
      
    Input Requirements
      o Full directory path where Exachk is installed
      o Full path of the CRS_HOME
    
    Ouput Details
      o Results of the Exachk, excluding root privileged checks

    

#!/bin/sh
    if [ "x%%Exachk_DIR%%" = "x" -o  "x%%CRS_HOME%%" = "x" ]; then
    echo "ERROR: Please enter a value for both Exachk directory and
CRS_HOME."
    else
      if [ -d %%CRS_HOME%% ]; then
        if [ -d %%Exachk_DIR%% ]; then
        export CRS_HOME=%%CRS_HOME%%
        %%Exachk_DIR%%/Exachk -S
        else
        echo "ERROR: Please enter a valid directory where Exachk is installed."
        fi
      else
      echo "ERROR: Please enter a valid CRS_HOME."
      fi
    fi
    

    Command Summary
      This command collects data from an Exachk execution performed outside
      of the Diagnostic Assistant tool.
      
    Input Requirements
      o Full directory path where Exachk zip file is located
    
    Ouput Details
      o Confirmation that the zip file was found

    

#!/bin/sh
     if [ "x%%Exachk_ZIPDIR%%" = "x" ]; then
       echo "ERROR: No Directory. You must enter a valid directory path."
     else
       if [ -d %%Exachk_ZIPDIR%% ]; then
       echo DA_FILE_COLLECTED=%%Exachk_ZIPDIR%%/.*.zip
       else
       echo "ERROR: Directory Invalid. You must enter a valid directory
path."
       fi
     fi
    

    Command Summary
      This command collects Clusterware related log files for a given date.
      
    Input Requirements
      o Full path to the GRID_HOME
      o Date in YYYY-MM-DD format
    
    Ouput Details
      o Zip file of the Clusterware log files for the given date
  
    

#!/bin/sh
    export HOST=`hostname -a`
    export GRID_HOME=%%GRIDHOME%%
    export BASELOGDIR=${GRID_HOME}/log/${HOST}
    export GRIDZIP=gridlogs_${HOST}.zip
     
    if [ -d $BASELOGDIR ]; then
      cd $BASELOGDIR
    else
      echo "ERROR: Invalid directory specified for GRID_HOME: ${GRID_HOME}"
      echo "Please export this environment variable with the correct value."
      exit 1
    fi

    export BASEOUTDIR=/tmp/da_grid
    export OUTDIR=${BASEOUTDIR}/logs_$$
    if [ ! -d ${BASEOUTDIR} ]; then
      mkdir ${BASEOUTDIR}
    fi
     
    if [ ! -d ${OUTDIR} ]; then
      mkdir ${OUTDIR}
    else
      rm -rf ${OUTDIR}/*
    fi
     
    # Need to capture output of:$GRID_HOME/bin/crsctl stat res -t -init
    ${GRID_HOME}/bin/crsctl stat res -t -init > ${OUTDIR}/crsctl.log

    export GREPDATE="%%GREPDATE%%"
         
    ## First, check the alert log
    F1=`grep -c "$GREPDATE" alert${HOST}.log`
    if [ ${F1} -gt 0 ]; then
      cp alert${HOST}.log ${OUTDIR}/
    fi
   
    ## Next, check ohasd/ohasd.*
    for a_log in `ls ohasd/ohasd.l*`
      do
        F2=`grep -c "$GREPDATE" ${a_log}`
        if [ ${F2} -gt 0 ]; then
          cp ${a_log} ${OUTDIR}/
        fi
    done
     
    ## Next, check agent/ohasd/oraagent_${USER}/oraagent_${USER}.l*

    for a_log in `ls agent/ohasd/oraagent_${USER}/oraagent_${USER}.l*`
      do
        F2=`grep -c "$GREPDATE" ${a_log}`
        if [ ${F2} -gt 0 ]; then
          cp ${a_log} ${OUTDIR}/
        fi
    done

    ## Next, check agent/ohasd/orarootagent_root/orarootagent_root.l*

    for a_log in `ls agent/ohasd/orarootagent_root/orarootagent_root.l*`
      do
        F2=`grep -c "$GREPDATE" ${a_log}`
        if [ ${F2} -gt 0 ]; then
          cp ${a_log} ${OUTDIR}/
        fi
    done

    ## Next, check cssd/ocssd.l*

    for a_log in `ls cssd/ocssd.l*`
      do
        F2=`grep -c "$GREPDATE" ${a_log}`
        if [ ${F2} -gt 0 ]; then
          cp ${a_log} ${OUTDIR}/
        fi
    done

    ## Next, check crsd/crsd.l*

    for a_log in `ls crsd/crsd.l*`
      do
        F2=`grep -c "$GREPDATE" ${a_log}`
        if [ ${F2} -gt 0 ]; then
          cp ${a_log} ${OUTDIR}/
        fi
    done

    ## Next, check agent/crsd/oraagent_${USER}/oraagent_${USER}.l*

    for a_log in `ls agent/crsd/oraagent_${USER}/oraagent_${USER}.l*`
      do
        F2=`grep -c "$GREPDATE" ${a_log}`
        if [ ${F2} -gt 0 ]; then
          cp ${a_log} ${OUTDIR}/
        fi
    done

    ## Next, check agent/crsd/orarootagent_root/orarootagent_root.l*

    for a_log in `ls agent/crsd/orarootagent_root/orarootagent_root.l*`
      do
        F2=`grep -c "$GREPDATE" ${a_log}`
        if [ ${F2} -gt 0 ]; then
          cp ${a_log} ${OUTDIR}/
        fi
    done

    ## Next, check diskmon/diskmon.l*

    for a_log in `ls diskmon/diskmon.l*`
      do
        F2=`grep -c "$GREPDATE" ${a_log}`
        if [ ${F2} -gt 0 ]; then
          cp ${a_log} ${OUTDIR}/
        fi
    done

    ## Next, check gpnpd/gpnpd.l*

    for a_log in `ls gpnpd/gpnpd.l*`
      do
        F2=`grep -c "$GREPDATE" ${a_log}`
        if [ ${F2} -gt 0 ]; then
          cp ${a_log} ${OUTDIR}/
        fi
    done

    ## Zip our list of files up, ignoring directories 
    cd ${OUTDIR}
    zip -j "${OUTDIR}/gridlog.zip" *

    echo DA_FILE_COLLECTED=${OUTDIR}/gridlog.zip

    

    Command Summary
      This command displays information about LSI battery state.
      
    Input Requirements
      o None
    
    Ouput Details
      o Details about the LSI battery state
  
    

#!/bin/sh
     if [ ! -x "/opt/MegaRAID/MegaCli/MegaCli64" ]; then
       echo "ERROR: LSI MegaCli64 executable not found"
     else
       /opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -aAll
     fi
    

    Command Summary
      This command displays information about Virtual Drive(s).
      
    Input Requirements
      o None
    
    Ouput Details
      o Details about Virtual Drive(s)
  
    

#!/bin/sh
     if [ ! -x "/opt/MegaRAID/MegaCli/MegaCli64" ]; then
       echo "ERROR: LSI MegaCli64 executable not found"
     else
       /opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -Lall -aAll
     fi
    

    Command Summary
      This command verifies the state of the cache in the dbnodes.
      
    Input Requirements
      o None
    
    Ouput Details
      o Verification of the cache state
  
    

#!/bin/sh
     if [ ! -x "/opt/MegaRAID/MegaCli/MegaCli64" ]; then
       echo "ERROR: LSI MegaCli64 executable not found"
     else
       /opt/MegaRAID/MegaCli/MegaCli64 --CfgDsply -a0 |grep -i writethrough
     fi
    

    Command Summary
     Runs NET module to collect Network information.
      
    Input Requirements
      o None
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "NET" subdirectory under 
        the Diagnostic Assistant output directory
        
    

run_module=NET

    Command Summary
      Runs LOG module to collect database trace and log files
    
    Input Requirements
      o None
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "LOG" subdirectory under 
        the Diagnostic Assistant output directory

    

run_module=LOG

    Command Summary
      Runs LOG module and shows the Alert Log and Diagnostic Incidents files
    
    Input Requirements
      o None
    
    Ouput Details
      o Shows the Alert log and Diagnostic Incidents log
      
  

run_module=LOG file_output=DA_LOG_alert_log.txt,DA_LOG_diag_incidents.txt view_existing_output=true

    Command Summary
      Runs ASM module and collects Automatic Storage management (ASM) information.

    Input Requirements
      o Is ASM installed in a separate Oracle home (Y/N)?
      o ASM Oracle Home Directory Path
      o ASM Oracle SID
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "ASM" subdirectory under 
        the Diagnostic Assistant output directory

  

run_module=ASM

    Command Summary
      Runs ONET module to collect Oracle Network information.
      
    Input Requirements
      o None
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "ONET" subdirectory under 
        the Diagnostic Assistant output directory
        
    

run_module=ONET

    Command Summary
      Runs Exadata_DatabaseHang profile to collect information to diagnose 
      database hanging issues.
      
    Input Requirements
      o None
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "Exadata_DatabaseHang" 
        subdirectory under the Diagnostic Assistant output directory
  
    

run_profile=Exadata_DatabaseHang

    Command Summary
      Runs Exadata_FailedDrives profile to collect information to diagnose 
      failed drive issues.
      
    Input Requirements
      o Enter a specific cell name/IP or a newline for all cells
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "Exadata_DatabaseHang" 
        subdirectory under the Diagnostic Assistant output directory
        
    

run_profile=Exadata_FailedDrives CELL_NODE=%%CELL_NODE%%

    Command Summary
      Runs Exadata_SickCell profile to collect information to diagnose 
      failed cell issues.
      
    Input Requirements
      o Enter a specific cell name/IP or a newline for all cells
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "Exadata_Sickcell" 
        subdirectory under the Diagnostic Assistant output directory
        
    

run_profile=Exadata_SickCell CELL_NODE=%%CELL_NODE%%

    Command Summary
      Runs Exadata_FlashDrives profile to collect information to diagnose  
      flash drive issues.
      
    Input Requirements
      o Enter a specific cell name/IP or a newline for all cells
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "Exadata_FlashDrives" 
        subdirectory under the Diagnostic Assistant output directory
        
    

run_profile=Exadata_FlashDrives CELL_NODE=%%CELL_NODE%%

    Command Summary
      Runs Exadata_NetworkCabling profile to collect information to  
      diagnose Network cabling issues.
      
    Input Requirements
      o None
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "Exadata_NetworkCabling" 
        subdirectory under the Diagnostic Assistant output directory
        
    

run_profile=Exadata_NetworkCabling

    Command Summary
      Runs Exadata_IbSwitch profile to collect information to diagnose 
      Ib switch issues.
      
    Input Requirements
      o Enter the user login for the remote switches
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "Exadata_IbSwitch" 
        subdirectory under the Diagnostic Assistant output directory
        
    

run_profile=Exadata_IbSwitch

    Command Summary
      Runs Exadata_IbSwitch profile at the root level to collect additional 
      information for the Exadata_IbSwitch collection. You must have run the
      Exadata_IbSwitch profile in normal (non-root) mode prior to this and 
      have an existing "Exadata_IbSwitch" subdirectory under the Diagnostic  
      Assistant output directory to store this additional information.
      
    Input Requirements
      o Enter the root user password
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "Exadata_IbSwitch" 
        subdirectory under the Diagnostic Assistant output directory that 
        contain detailed switch data
        
    

run_profile_root=Exadata_IbSwitch

    Command Summary
      Runs Exadata_RacInstance profile to collect information to diagnose 
      RAC instance issues.
      
    Input Requirements
      o Is ASM installed in a separate Oracle home (Y/N)?
      o ASM Oracle Home Directory Path
      o ASM Oracle SID
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "Exadata_RacInstance" 
        subdirectory under the Diagnostic Assistant output directory
        
    

run_profile=Exadata_RacInstance

    Command Summary
      Runs Exadata_Assessment profile to collect information about the entire 
      Exadata implementation. This collection may take over 15 minutes to complete.
      
    Input Requirements
      o Is ASM installed in a separate Oracle home (Y/N)?
      o ASM Oracle Home Directory Path
      o ASM Oracle SID
    
    Ouput Details
      o Shows a summary of the collection process
      o Generates a collection of files in the "Exadata_Assessment" 
        subdirectory under the Diagnostic Assistant output directory
        
    

run_profile=Exadata_Assessment

    Command Summary
      Collects the controlfile and redohdr dump data.
      
    Input Requirements
      o None
    
    Ouput Details
      o Shows the controlfile and redohdr dump

    

connect / as sysdba
      
      set pages 10000
      prompt Collecting the controlfile and redohdr dump...
  
      alter session set events 'immediate trace name controlf level 10' ;
      alter session set events 'immediate trace name redohdr level 10' ; 
    

    Command Summary
      This command is step 1 in the 2 step process for the collection of 
      important patching and validation logs.
      
      Step 1 captures from the cell side. Requires "root"
      user creditionals:
        /var/log/cellos/CheckHWnFWProfile.log
        /var/log/cellos/validations.log
        /var/log/cellos/checkconfigs_configuration_summaries.txt
        /var/log/cellos/validations/upgradecbusb.log
        /var/log/cellos/patch.out.place.log
        /root/_patch_hctap_/_p_/wait_out 
        /root/_patch_hctap_/ all .log and .txt files
        /boot/ all .log and .txt files
        imageinfo
        ipmitool event logs 
        /opt/oracle.SupportTools/CheckHWnFWProfile hardware and firmware checks
        /var/log/messages
        /SP/console/history
      
    Input Requirements
      o Cell Node(s)
        - select cell(s) FIRST_NODE, ALL_NODES, enter name/ip 
        - default is ALL NODES
    
    Ouput Details
      o Location of the resulting zip file
  
    

SSHCELL_AS_ROOT %%CELL_NODE%%
    echo "BEGIN GET --------------- /var/log/cellos/CheckHWnFWProfile.log"
    echo " "
    cat /var/log/cellos/CheckHWnFWProfile.log 
    echo " "
    echo "END --------------------- /var/log/cellos/CheckHWnFWProfile.log"
    echo " "
    
    echo "BEGIN GET --------------- /var/log/cellos/validations.log"
    echo " "
    cat /var/log/cellos/validations.log
    echo " "
    echo "END ---------------------  /var/log/cellos/validations.log"
    echo " "
    
    echo "BEGIN GET --------------- /var/log/cellos/checkconfigs_configuration_summaries.txt"
    echo " "
    cat /var/log/cellos/checkconfigs_configuration_summaries.txt
    echo " "
    echo "END ---------------------  /var/log/cellos/checkconfigs_configuration_summaries.txt"
    echo " "
    
    echo "BEGIN GET --------------- /var/log/cellos/upgradecbusb.log"
    echo " "
    cat /var/log/cellos/upgradecbusb.log
    echo " "
    echo "END ---------------------  /var/log/cellos/upgradecbusb.log"
    echo " "
    
    echo "BEGIN GET --------------- /var/log/cellos/patch.out.place.log"
    echo " "
    cat /var/log/cellos/patch.out.place.log
    echo " "
    echo "END ---------------------  /var/log/cellos/patch.out.place.log"
    echo " "
 
    for i in `ls /root/_patch_hctap_/_p_/wait*`
    do
    echo "BEGIN GET --------------- $i"
    echo " "
    cat $i
    echo " "
    echo "END ---------------------  $i"
    echo " "
    done

    for i in `ls /root/_patch_hctap_/*.log`
    do
    echo "BEGIN GET --------------- $i"
    echo " "
    cat $i
    echo " "
    echo "END ---------------------  $i"
    echo " "
    done

    for i in `ls /root/_patch_hctap_/*.txt`
    do
    echo "BEGIN GET --------------- $i"
    echo " "
    cat $i
    echo " "
    echo "END ---------------------  $i"
    echo " "
    done

    for i in `ls /boot/*.log`
    do
    echo "BEGIN GET --------------- $i"
    echo " "
    cat $i
    echo " "
    echo "END ---------------------  $i"
    echo " "
    done

    for i in `ls /boot/*.txt`
    do
    echo "BEGIN GET --------------- $i"
    echo " "
    cat $i
    echo " "
    echo "END ---------------------  $i"
    echo " "
    done

    echo "BEGIN GET --------------- imageinfo"
    echo " "
    imageinfo
    echo " "
    echo "END --------------------- imageinfo"
    echo " "

    echo "BEGIN GET --------------- ipmitool event logs"
    echo " "
    ipmitool sel elist > ipmitool_sel_elist.`hostname -s`.txt
    cat ipmitool_sel_elist.`hostname -s`.txt
    echo " "
    echo "END --------------------- ipmitool event logs"
    echo " "

    echo "BEGIN GET --------------- hardware and firmware checks"
    echo " "
    /opt/oracle.SupportTools/CheckHWnFWProfile -c loose >  hwfw.`hostname`.txt
    cat hwfw.`hostname`.txt
    echo " "
    echo "END --------------------- hardware and firmware checks"
    echo " "

    echo "BEGIN GET --------------- /var/log/messages"
    echo " "
    cat /var/log/messages
    echo " "
    echo "END --------------------- /var/log/messages"
    echo " "

    echo "BEGIN GET --------------- Serial Console"
    echo " "
    ipmitool sunoem cli 'show  /SP/console/history' > serialconsole.`hostname -s`.txt
    cat serialconsole.`hostname -s`.txt
    echo " "
    echo "END --------------------- Serial Console"
    echo " "

    

    Command Summary
      This command is step 2 in the 2 step process for the collection of 
      important patching and validation logs.
      
      Step 2 captures patching logs from node location of where the patchmgr
      was last run. Generally requires "root" user creditionals:
            {PATCHMGR_DIR}/patchmgr.stderr
            {PATCHMGR_DIR}/patchmgr.stderr
            {PATCHMGR_DIR}/patchmgr_output.txt
            {PATCHMGR_DIR}/.../...logs
      
    Input Requirements
      o Host
        - enter the node name where the patchmgr ran from
        - no .domain
      o Password
        - ssh password for root user
      o Patch Manager
        - enter the location of where the patchmgr was last run
    
    Ouput Details
      o patching logs from node location of where the patchmgr
        was last run
  
    

SSH %%PASS%% root@%%HOST%% export LOGDIR=%%PATCHMGR%%
    if [ -d $LOGDIR ]; then
      cd $LOGDIR
    else
      echo "ERROR: Invalid directory specified for PatchMgr Location: %%PATCHMGR%%"
      exit 1
    fi

    echo "BEGIN GET --------------- ${LOGDIR}/patchmgr.stderr"
    echo " "
    cat ${LOGDIR}/patchmgr.stderr
    echo " "
    echo "END ---------------------  ${LOGDIR}/patchmgr.stderr"
    echo " "
    
    echo "BEGIN GET --------------- ${LOGDIR}/patchmgr.stdout"
    echo " "
    cat ${LOGDIR}/patchmgr.stdout
    echo " "
    echo "END ---------------------  ${LOGDIR}/patchmgr.stdout"
    echo " "
    
    echo "BEGIN GET --------------- ${LOGDIR}/patchmgr_output.txt"
    echo " "
    cat ${LOGDIR}/patchmgr_output.txt
    echo " "
    echo "END ---------------------  ${LOGDIR}/patchmgr_output.txt"
    echo " "
    
    for i in `find ${LOGDIR} -name \*.log`
    do
    echo "BEGIN GET --------------- $i"
    echo " "
    cat $i
    echo " "
    echo "END ---------------------  $i"
    echo " "
    done

    

    Command Summary
      This option can be used when the cell is not accessible but the ILOM 
      can be accessed. Root user credentials are required.
      
    Input Requirements
      o Host
        - enter the IP address or hostname of the server to connect from
        - no .domain
      o Password
        - ssh password for root user
      o ILOMHost
        - enter the ILOM ip address or hostname for the troubled cell
      o ILOMPassword
        - enter ILOM root user password

    Ouput Details
      o patching logs from the ILOM serial console for the cell
  
    

SSH %%PASS%% root@%%HOST%% export IHOST=%%ILOMHOST%% 
    export IPASS=%%PASS2%%
    
    echo "BEGIN GET --------------- Serial Console"
    echo " "
    rm -f serialconsole.${IHOST}.txt
    ipmitool -H ${IHOST} -U root -P ${IPASS} sunoem cli 'show  /SP/console/history' >> serialconsole.${IHOST}.txt
    cat serialconsole.${IHOST}.txt
    echo " "
    echo "END --------------------- Serial Console"