Patch 9952228 - 11.1.0.7.5 Patch Set Update
Released: October 12, 2010
This document is accurate at the time of release. For any changes and additional information regarding PSU 11.1.0.7.5, see these related documents that are available at My Oracle Support (http://support.oracle.com/):
Note 854428.1 Patch Set Updates for Oracle Products
Note 1230876.1 Oracle Database Patch Set Update 11.1.0.7.5 Known Issues
This document includes the following sections:
Patch Set Update (PSU) patches are cumulative. That is, the content of all previous PSUs is included in the latest PSU patch.
PSU 11.1.0.7.5 includes all fixes previously included in PSU 11.1.0.7.4 and those listed in Section 5, "Bugs Fixed by This Patch".
To install the PSU 11.1.0.7.5 patch, the Oracle home must have the 11.1.0.7.0 Database installed. Subsequent PSU patches can be installed on Oracle Database 11.1.0.7.0 or any PSU with a lower 5th numeral version than the one being installed.
Table 1 describes installation types and security content. For each installation type, it indicates the most recent PSU patch to include new security fixes that are pertinent to that installation type. If there are no security fixes to be applied to an installation type, then "None" is indicated. If a specific PSU is listed, then apply that or any later PSU patch to be current with security fixes.
Table 1 Installation Types and Security Content
| Installation Type | Latest PSU with Security Fixes |
|---|---|
|
Server homes |
PSU 11.1.0.7.5 |
|
Client-Only Installations |
None |
|
Instant Client Installations |
None (The Instant Client installation is not the same as the client-only Installation. For additional information about Instant Client installations, see Oracle Database Concepts.) |
|
ASM (Automatic Storage Management) homes |
PSU 11.1.0.7.1 |
|
CRS (Cluster Ready Services) homes |
None |
This section includes the following sections:
For a list of platforms that are supported in this Patch Set Update, see My Oracle Support Note 1159443.1 Patch Set Update and Critical Patch Update October 2010 Availability Document.
You must use the OPatch utility version 11.1.0.6.7 or later to apply this patch. Oracle recommends that you use the latest released OPatch 11.1, which is available for download from My Oracle Support patch 6880880 by selecting the 11.1.0.0.0 release.
For information about OPatch documentation, including any known issues, see My Oracle Support Note 293369.1 OPatch documentation list.
These instructions are for both non-RAC environments and RAC environments.
Before you install PSU 11.1.0.7.5, perform the following actions to check the environment and to detect and resolve any one-off patch conflicts.
Ensure that the $PATH definition has the following executables: make, ar, ld, and nm.
The location of these executables depends on your operating system. On many operating systems, they are located in /usr/ccs/bin, in which case you can set your PATH definition as follows:
export PATH=$PATH:/usr/ccs/bin
For an introduction to the PSU one-off patch concepts, see "Patch Set Updates Patch Conflict Resolution" in My Oracle Support Note 854428.1 Patch Set Updates for Oracle Products.
The fastest and easiest way to determine whether you have one-off patches in the Oracle home that conflict with the PSU, and to get the necessary conflict resolution patches, is to use the Patch Recommendations and Patch Plans features on the Patches & Updates tab in My Oracle Support. These features work in conjunction with the My Oracle Support Configuration Manager. Recorded training sessions on these features can be found in Note 603505.1.
However, if you are not using My Oracle Support Patch Plans, follow these steps:
Determine whether any currently installed one-off patches conflict with the PSU patch as follows:
unzip p9952228_11107_<platform>.zip opatch prereq CheckConflictAgainstOHWithDetail -phBaseDir ./9952228
The report will indicate the patches that conflict with PSU 9952228 and the patches for which PSU 9952228 is a superset. Refer to "Patch Set Updates Patch Conflict Resolution" in My Oracle Support Note 854428.1 Patch Set Updates for Oracle Products.
Note that Oracle proactively provides PSU 11.1.0.7.5 one-off patches for common conflicts.
Use My Oracle Support Note 1061295.1 Patch Set Updates - One-off Patch Conflict Resolution to determine, for each conflicting patch, whether a conflict resolution patch is already available, and if you need to request a new conflict resolution patch or if the conflict may be ignored
When all the PSU 11.1.0.7.5 one-off patches that you have requested are available at My Oracle Support, proceed with Section 2.3.2, "Patch Installation Instructions".
Follow these steps:
If you are using a Data Guard Physical Standby database, you must install this patch on both the primary database and the physical standby database, as described by My Oracle Support Note 278641.1.
If you are patching an ASM instance, shut down all Oracle Database instances that use this ASM instance. (To see which Oracle Database instances are connected to this ASM instance, query the V$ASM_CLIENT view.)
Do one of the following, depending on whether this is a RAC environment:
If this is a RAC environment, choose one of the patch installation methods provided by OPatch (rolling, all node, or minimum downtime), and shutdown instances and listeners as appropriate for the installation method selected.
This PSU patch is rolling RAC installable. Refer to My Oracle Support Note 244241.1 Rolling Patch - OPatch Support for RAC.
If this is not a RAC environment, shut down all instances and listeners associated with the Oracle home that you are updating. For more information, see Oracle Database Administrator's Guide.
Set your current directory to the directory where the patch is located and then run the OPatch utility by entering the following commands:
unzip p9952228_11107_<platform>.zip
cd 9952228
opatch apply
If there are errors, refer to Section 3, "Known Issues".
Do not perform the operations in this section on ASM instances. However, if you shut down ASM as part of applying the PSU, you must start ASM instances before you can perform any of the actions in this section on any database instances.
After installing the patch, perform the following actions:
Apply conflict resolution patches as explained in Section 2.3.3.1.
Load modified SQL files into the database, as explained in Section 2.3.3.2.
Recompile views in the database, if necessary, as explained in Section 2.3.3.3.
Apply the patch conflict resolution one-off patches that were determined to be needed when you performed the steps in Section 2.3.1.2, "One-off Patch Conflict Detection and Resolution".
The following steps load modified SQL files into the database. For a RAC environment, perform these steps on only one node.
For each database instance running on the Oracle home being patched, connect to the database using SQL*Plus. Connect as SYSDBA and run the catbundle.sql script as follows:
cd $ORACLE_HOME/rdbms/admin sqlplus /nolog SQL> CONNECT / AS SYSDBA SQL> STARTUP SQL> @catbundle.sql psu apply SQL> QUIT
The catbundle.sql execution is reflected in the dba_registry_history view by a row associated with bundle series PSU.
For information about the catbundle.sql script, see My Oracle Support Note 605795.1 Introduction to Oracle Database catbundle.sql.
Check the following log files in $ORACLE_HOME/cfgtoollogs/catbundle for any errors:
catbundle_PSU_<database SID>_APPLY_<TIMESTAMP>.log catbundle_PSU_<database SID>_GENERATE_<TIMESTAMP>.log
where TIMESTAMP is of the form YYYYMMMDD_HH_MM_SS. If there are errors, refer to Section 3, "Known Issues".
Recompiling views in the database is a one-time action that is required to complete the installation of CPU fixes that were initially released in January, 2008. It requires that the database be in upgrade mode, so this step is not rolling RAC installable. You may defer this step to a later downtime. If you do this, your system will continue to work; however, the installation of the January 2008 CPU fixes will not be complete until the view recompilation is completed.
Skip this section if you have recompiled views for this database during the installation of a previous PSU or CPU.
The time required to recompile the views and related objects depends on the total number of objects and on your system configuration. In one internal Oracle test with approximately 2000 views and 4000 objects, the total execution time for view_recompile_jan2008cpu.sql and utlrp.sql was about 30 minutes.
If you want to check whether view recompilation has already been performed for the database, execute the following statement:
SELECT * FROM registry$history where ID = '6452863';
If the view recompilation has been performed, this statement returns one or more rows. If the view recompilation has not been performed, this statement returns no rows.
The following steps recompile the views in the database. For a RAC environment, perform these steps on only one node.
Run the pre-check script (so named because it was initially released in CPUJan2008), which reports the maximum number of views and objects that may be recompiled:
cd $ORACLE_HOME/cpu/view_recompile sqlplus /nolog SQL> CONNECT / AS SYSDBA SQL> @recompile_precheck_jan2008cpu.sql SQL> QUIT
The purpose of this step is to help you determine whether view recompilation should be done at the same time as the PSU install, or scheduled later.
If the database is not in a RAC environment, perform this step and skip the next step. (If the database is in a RAC environment, go to the next step.)
Run the view recompilation script. Note that this script is run with the database in upgrade mode, which restricts connections as SYSDBA.
cd $ORACLE_HOME/cpu/view_recompile sqlplus /nolog SQL> CONNECT / AS SYSDBA SQL> SHUTDOWN IMMEDIATE SQL> STARTUP UPGRADE SQL> @view_recompile_jan2008cpu.sql SQL> SHUTDOWN; SQL> STARTUP; SQL> QUIT
If the database is in a RAC environment, run the view recompilation script as follows. Note that this script is run with the database in upgrade mode, which restricts connections as SYSDBA. Stop all instances except the one where the view recompilation is being executed.
cd $ORACLE_HOME/cpu/view_recompile
sqlplus /nolog
SQL> CONNECT / AS SYSDBA
SQL> STARTUP NOMOUNT
SQL> ALTER SYSTEM SET CLUSTER_DATABASE=FALSE SCOPE=spfile;
SQL> SHUTDOWN
SQL> STARTUP UPGRADE
SQL> @view_recompile_jan2008cpu.sql
SQL> SHUTDOWN;
SQL> STARTUP NOMOUNT;
Set the CLUSTER_DATABASE initialization parameter to TRUE:
SQL> ALTER SYSTEM SET CLUSTER_DATABASE=TRUE SCOPE=spfile;
Restart the database:
SQL> QUIT
cd $CRS_HOME/bin
srvctl start database -d <database-name>
Check the log file for any errors. The log file is in the current directory and is named: vcomp_<sid>_<timestamp>.log
If any invalid objects were reported, run the utlrp.sql script as follows:
cd $ORACLE_HOME/rdbms/admin sqlplus /nolog SQL> CONNECT / AS SYSDBA SQL> @utlrp.sql
Then, manually recompile any invalid objects. For example:
SQL> alter package schemaname.packagename compile;
The setting of RECYCLEBIN is changed during the preceding steps due to bug 9768907; therefore, see My Oracle Support Note 9768907.8 STARTUP UPGRADE turns off RECYCLEBIN with SPFILE for details and workaround instructions.
These instructions are for a database that is created or upgraded after the installation of PSU 11.1.0.7.5.
You must execute the steps in Section 2.3.3.2, "Loading Modified SQL Files into the Database" for any new database only if it was created by any of the following methods:
Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)
Using a script that was created by DBCA that creates a database from a sample database
Upgraded databases require that you perform the steps in Section 2.3.3.3, "Recompiling Views in the Database" if these steps have not previously been performed; otherwise, no post-installation steps need to be performed.
These instructions are for both Non-RAC environments and RAC environments.
Section 2.4.1, "Patch Deinstallation Instructions for a Non-RAC Environment"
Section 2.4.2, "Post Deinstallation Instructions for a Non-RAC Environment"
Section 2.4.3, "Patch Deinstallation Instructions for a RAC Environment"
Section 2.4.4, "Post Deinstallation Instructions for a RAC Environment"
Follow these steps:
Verify that an $ORACLE_HOME/rdbms/admin/catbundle_PSU_<database SID>_ROLLBACK.sql file exists for each database associated with this ORACLE_HOME. If this is not the case, you must execute the steps in Section 2.3.3.2, "Loading Modified SQL Files into the Database" against the database before deinstalling the PSU.
Shut down all instances and listeners associated with the Oracle home that you are updating. For more information, see Oracle Database Administrator's Guide.
Run the OPatch utility specifying the rollback argument as follows.
opatch rollback -id 9952228
If there are errors, refer to Section 3, "Known Issues".
Follow these steps:
Start all database instances running from the Oracle home. (For more information, see Oracle Database Administrator's Guide.)
For each database instance running out of the ORACLE_HOME, connect to the database using SQL*Plus as SYSDBA and run the rollback script as follows:
cd $ORACLE_HOME/rdbms/admin
sqlplus /nolog
SQL> CONNECT / AS SYSDBA
SQL> STARTUP
SQL> @catbundle_PSU_<database SID>_ROLLBACK.sql
SQL> QUIT
In a RAC environment, the name of the rollback script will have the format catbundle_PSU_<database SID PREFIX>_ROLLBACK.sql.
Check the log file for any errors. The log file is found in $ORACLE_HOME/cfgtoollogs/catbundle and is named catbundle_PSU_<database SID>_ROLLBACK_<TIMESTAMP>.log where TIMESTAMP is of the form YYYYMMMDD_HH_MM_SS. If there are errors, refer to Section 3, "Known Issues".
Follow these steps for each node in the cluster, one node at a time:
Shut down the instance on the node. (Shut down all RDBMS instances before any ASM instances.)
Run the OPatch utility specifying the rollback argument as follows.
opatch rollback -id 9952228
If there are errors, refer to Section 3, "Known Issues".
Start the instance on the node. Depending on the type of home, enter the following commands or command.
For ASM homes:
srvctl start listener srvctl start asm srvctl start instance
For RDBMS (non-ASM) homes:
srvctl start instance
Follow the instructions listed in Section Section 2.4.2, "Post Deinstallation Instructions for a Non-RAC Environment" only on the node for which the steps in Section 2.3.3.2, "Loading Modified SQL Files into the Database" were executed during the patch application.
All other instances can be started and accessed as usual while you are executing the deinstallation steps.
For information about OPatch issues, see My Oracle Support Note 293369.1 OPatch documentation list.
For issues documented after the release of this PSU, see My Oracle Support Note 1230876.1 Oracle Database Patch Set Update 11.1.0.7.5 Known Issues.
Other known issues are as follows.
The following ignorable errors may be encountered while running the catbundle.sql script or its rollback script:
ORA-29809: cannot drop an operator with dependent objects ORA-29931: specified association does not exist ORA-29830: operator does not exist ORA-00942: table or view does not exist ORA-00955: name is already used by an existing object ORA-01430: column being added already exists in table ORA-01432: public synonym to be dropped does not exist ORA-01434: private synonym to be dropped does not exist ORA-01435: user does not exist ORA-01917: user or role 'XDB' does not exist ORA-01920: user name '<user-name>' conflicts with another user or role name ORA-01921: role name '<role name>' conflicts with another user or role name ORA-01952: system privileges not granted to 'WKSYS' ORA-02303: cannot drop or replace a type with type or table dependents ORA-02443: Cannot drop constraint - nonexistent constraint ORA-04043: object <object-name> does not exist ORA-29832: cannot drop or replace an indextype with dependent indexes ORA-29844: duplicate operator name specified ORA-14452: attempt to create, alter or drop an index on temporary table already in use ORA-06512: at line <line number>. If this error follow any of above errors, then can be safely ignored. ORA-01927: cannot REVOKE privileges you did not grant
The view recompilation pre-check script returns different results during subsequent runs (such as after the first time you ran it).
The results (the maximum number of views and objects that may be recompiled) may be more or less than reported in the previous running of the script. This is expected behavior, and is not a problem.
If the view recompilation script has already been run, a message is displayed indicating that the script has already been applied.
This is not a problem, because as the instructions note, you do not need to run the script if it has already been run.
On HP-UX systems, the following ignorable warnings may be encountered during the relinking of the oracle binary:
WARNING:OUI-67215: OPatch found the word "failed" in the stderr of the make command.Please look at this stderr. You can re-run this make command. cc: warning 487: Possibly incorrect message catalog. total_lntt_bytes is 0, assuming size of .debug_lntt Failed to mmap lntt temp file.
The inventory list of patches for PSU 11.1.0.7.2 does not include fix 9250812, although the code for this fix is, in fact, included in the PSU. This situation can result in the following issues that do not require any action on your part:
If you install PSU 11.1.0.7.2 on top of PSU 11.1.0.7.1 and patch 9250812, OPatch will detect a conflict with patch 9250812. This conflict can be ignored, and you can proceed with the installation of PSU 11.1.0.7.2.
After PSU 11.1.0.7.2 is installed, fix for patch 9250812 will not be listed in the OPatch bug inventory, but the fix is included in the PSU.
The PSU 11.1.0.7.5 patch 9952228 inventory and the readme incorrectly list Bug 7171015 as being fixed.
PSU 11.1.0.7.6 will contain the bug fix for 7171015.
The following documents are references for this patch.
Note 293369.1 OPatch documentation list
Note 360870.1 Impact of Java Security Vulnerabilities on Oracle Products
Note 468959.1 Enterprise Manager Grid Control Known Issues
Note 9952228.8 Bug 9952228 - 11.1.0.7.5 Patch Set Update (PSU)
This patch includes the following bug fixes.
CPU molecules in PSU 11.1.0.7.5:
PSU 11.1.0.7.5 contains all molecules previously released in PSU 11.1.0.7.4 and the following new PSU 11.1.0.7.5 molecules:
10009173 - DB-11.1.0.7-MOLECULE-030-CPUOCT2010
10009222 - DB-11.1.0.7-MOLECULE-032-CPUOCT2010
10009229 - DB-11.1.0.7-MOLECULE-033-CPUOCT2010
10009241 - DB-11.1.0.7-MOLECULE-034-CPUOCT2010
10009246 - DB-11.1.0.7-MOLECULE-035-CPUOCT2010
PSU 11.1.0.7.5 contains all fixes previously released in PSU 11.1.0.7.4 and the following new fixes:
Advanced Queuing
7694273 - AQCON:EMON SIGNIFICANTLY SLOW WITH ARRAY ENQUEUE AND MULTIPLE SCHEDULES ON A Q
High Availability
6858062 - KSWSAS SERVICE ENTRY IS NEVER FREED RESULTING IN MEMORY USE FOR DELETED SERVICES
7133740 - BUGAP: ONE INSTANCE OF BUG ( 2 - NODE RAC DATABASE) I CRASHED DUE TO ORA-600
7585314 - OCSSD.BIN CONSUMING 6 TIMES MORE CPU IF EXCESSIVE DATAPUMP IS RUNNING ON NODE
7661251 - SR11.2RCL - TRC - ORA-00445: BACKGROUND PROCESS "W006" DID NOT START AFTER 6
8247855 - AFTER ERROR IN K2G_DTP_START_SVC, HANG ON AS ENQUEUE OCCURS
8342923 - SIGSEGV SIGNALED WHEN ATTEMPTING TO START A NON-EXISTENT SERVICE
8433693 - MAIN_LINUX LRG9H9C RUNS WILL BE SUSPENDED 04/21/09; TOO MANY HANGS
8502963 - PMON FAILS TO ACQUIRE LATCH AND PUBLISH CONNECTION LOAD BALANCING
8546332 - TB_FAN:RESTART NON-RLB MASTER INSTANCE, SOME RLB EVENTS ARE INCORRECT.
8622613 - CKPT HITS ORA-600 ERROR
8764031 - SERVICES DML CAUSES ORA-00600 FOR READ ONLY DATABASE
8847439 - SERVICE NAMES NOT ALWAYS TREATED AS CASE INSENSITIVE BY RAC
9485429 - DIAG DUMP TIMEOUT AFTER IPC SEND TIMEOUT
9841005 - ADG USAGE QUERY IS INCORRECT IN FEATURE USAGE TRACKING
10019218 - DROPPED DISKS BEFORE DISK_REPAIR_TIME EXPIRED
10046072 - FIX FOR RAC ROLLING ISSUE WITH SERVICES MERGE FIXES
10127716 - APPSST:GSI 11G RECOVERY SLOW FOR 45 MINUTES AFTER STARTING MRP
Buffer Cache Management
8248911 - TB:SH: DBW0 HIT ORA-00600: INTERNAL ERROR CODE,ARGUMENTS:[2886],INSTANCE CRASHED
Generic
5552232 - WRONG RESULTS WITH ROWNUM WHEN PARALLEL EXECUTION
6522654 - USING DATA PUMP THROUGH DBLINK CAUSED DATA CORRUPTION FOR CLOB VALUES
6734871 - EUS USERS INTERMITTENTLY HANG
6798427 - ORA-07445 [NPIERR()+446] [SIGSEGV]
6971433 - ORA-600 [KTREXC_1] OCCURRED DURING MERGE INTO
7174167 - ORA-600 AT QCTOTRANLIK:LIKE TRANSFORM IF SET NLS_COMP=LINGUISTIC AND NLS_SORT
7626014 - TB:SH: ORA-00600:[KKSFBC-NEW-CHILD-THRESH-EXCEEDED], [], [], IN LONG RUNNING
8763922 - ORA-07445 [KGGHASH()+216] [ACCESS_VIOLATION] [ADDR:0X1A3A0000] [PC:0X61A83C8] [
8803762 - ORA-00600 [KDSGRP1] BLOCK CORRUPTION ON 11G DATABASE UPGRADE
9399991 - ORA-600 [KKPAMRGET] / ORA-600 [KCBGCUR_1] LEAD TO RAC NODE CRASH
9768907 - 11G PSU1 TURNED OFF RECYCLE BIN SCOPE=BOTH VIA "STARTUP UPGRADE"
Space Management
6709070 - ORA-600 [6780] IN TEST CASE FOR BUG 5577788
7022905 - ALTER TABLESPACE DROP DATAFILE DROPS NON_EMPTY FILE
7041254 - RESTORE VALIDATE CHECK LOGICAL FAILS WITH ORA-19661 ON SYSAUX DATAFILE
7329252 - ORA-8102 DURING REBUILD INDEX ONLINE WHEN CONCURRENT W/ UPDATES
8332021 - CANNOT ADD A DF WHEN SESSIONS ARE REPORTING ORA-1653 ON 11.1.0.7
9084111 - ORA-600 [KTFBHGET-1] ON TRUNCATE TABLE AND ADD DATAFILE
Secure Files
8856478 - PERF DEGRADATION WITH SF COMPRESSION ON SMALL LOBS DURING ATB MOVE
Scheduler
8285404 - CJQ ERRORS OUT WITH ORA-1000 DURING WINDOW SWITCHES
8649055 - DATABASE SCHEDULER JOBS STOP RUNNING INTERMITTENTLY
9434549 - SCH:EVENT JOBS SCHEDULED MORE NUMBER OF TIMES THAN EXPECTED
Our goal is to make Oracle products, services, and supporting documentation accessible to all users, including users that are disabled. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at http://www.oracle.com/accessibility/.
Accessibility of Code Examples in Documentation
Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.
Accessibility of Links to External Web Sites in Documentation
This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.
TTY Access to Oracle Support Services
To reach AT&T Customer Assistants, dial 711 or 1.800.855.2880. An AT&T Customer Assistant will relay information between the customer and Oracle Support Services at 1.800.223.1711. Complete instructions for using the AT&T relay services are available at http://www.consumer.att.com/relay/tty/standard2.html. After the AT&T Customer Assistant contacts Oracle Support Services, an Oracle Support Services engineer will handle technical issues and provide customer support according to the Oracle service request process.
Patch 9952228 - 11.1.0.7.5 Patch Set Update Release 11.1.0.7.3 for UNIX
Copyright © 2006, 2010, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.
If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.
This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications.
Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.
This software and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.