Skip Headers
Oracle® Database Patch 10248523 - 11.2.0.2.1 Patch Set Update

 

 

Oracle® Database

Patch 10248523 - 11.2.0.2.1 Patch Set Update

 

Released: January 18, 2011

This document is accurate at the time of release. For any changes and additional information regarding PSU 11.2.0.2.1, see these related documents that are available at My Oracle Support (http://support.oracle.com/):

This document includes the following sections:

1 Patch Information

Patch Set Update (PSU) patches are cumulative. That is, the content of all previous PSUs is included in the latest PSU patch.

PSU 11.2.0.2.1 includes the fixes listed in Section 7, "Bugs Fixed by This Patch".

To install the PSU 11.2.0.2.1 patch, the Oracle home must have the 11.2.0.1.0 Database installed. Subsequent PSU patches can be installed on Oracle Database 11.2.0.1.0 or any PSU with a lower 5th numeral version than the one being installed.

Table 1 describes installation types and security content. For each installation type, it indicates the most recent PSU patch to include new security fixes that are pertinent to that installation type. If there are no security fixes to be applied to an installation type, then "None" is indicated. If a specific PSU is listed, then apply that or any later PSU patch to be current with security fixes.

Table 1 Installation Types and Security Content

Installation Type Latest PSU with Security Fixes

Server homes

None

Grid Infrastructure home

None

Client-Only Installations

None

Instant Client Installations

None

(The Instant Client installation is not the same as the client-only Installation. For additional information about Instant Client installations, see Oracle Database Concepts.)


2 Prerequisites

This section includes the following section:

2.1 OPatch Utility

You must use the OPatch utility version 11.2.0.1.3 or later to apply this patch. Oracle recommends that you use the latest released OPatch 11.2, which is available for download from My Oracle Support patch 6880880 by selecting the 11.2.0.0.0 release.

For information about OPatch documentation, including any known issues, see My Oracle Support Note 293369.1 OPatch documentation list.

3 Installation

These instructions are for all Oracle Database installations.

3.1 Patch Pre-Installation Instructions

Before you install PSU 11.2.0.2.1, perform the following actions to check the environment and to detect and resolve any one-off patch conflicts.

3.1.1 Environments with Grid Infrastructure

If you are installing the PSU to an environment that has a Grid Infrastructure home, note the following:

  • Database PSU 11.2.0.2.1 should only be applied to the Database home using the instructions contained in this readme.

  • 11.2.0.2 Grid Infrastructure bundle patch 1 <<Patch 10157506>> should be applied to the Grid Infrastructure home using the readme instructions provided with the bundle patch.

3.1.2 Environment Checks

  1. Ensure that the $PATH definition has the following executables: make, ar, ld, and nm.

    The location of these executables depends on your operating system. On many operating systems, they are located in /usr/ccs/bin, in which case you can set your PATH definition as follows:

    export PATH=$PATH:/usr/ccs/bin
    

3.1.3 One-off Patch Conflict Detection and Resolution

For an introduction to the PSU one-off patch concepts, see "Patch Set Updates Patch Conflict Resolution" in My Oracle Support Note 854428.1 Patch Set Updates for Oracle Products.

The fastest and easiest way to determine whether you have one-off patches in the Oracle home that conflict with the PSU, and to get the necessary conflict resolution patches, is to use the Patch Recommendations and Patch Plans features on the Patches & Updates tab in My Oracle Support. These features work in conjunction with the My Oracle Support Configuration Manager. Recorded training sessions on these features can be found in Note 603505.1.

However, if you are not using My Oracle Support Patch Plans, follow these steps:

  1. Determine whether any currently installed one-off patches conflict with the PSU patch as follows:

    unzip p10248523_11201_<platform>.zip
    opatch prereq CheckConflictAgainstOHWithDetail -phBaseDir ./10248523
    
  2. The report will indicate the patches that conflict with PSU 10248523 and the patches for which PSU 10248523 is a superset.

    Note that Oracle proactively provides PSU 11.2.0.2.1 one-off patches for common conflicts.

  3. Use My Oracle Support Note 1061295.1 Patch Set Updates - One-off Patch Conflict Resolution to determine, for each conflicting patch, whether a conflict resolution patch is already available, and if you need to request a new conflict resolution patch or if the conflict may be ignored.

  4. When all the one-off patches that you have requested are available at My Oracle Support, proceed with Section 3.2, "Patch Installation Instructions".

3.2 Patch Installation Instructions

Follow these steps:

  1. If you are using a Data Guard Physical Standby database, you must install this patch on both the primary database and the physical standby database, as described by My Oracle Support Note 278641.1.

  2. Do one of the following, depending on whether this is a RAC environment:

    • If this is a RAC environment, choose one of the patch installation methods provided by OPatch (rolling, all node, or minimum downtime), and shutdown instances and listeners as appropriate for the installation method selected.

      This PSU patch is rolling RAC installable. Refer to My Oracle Support Note 244241.1 Rolling Patch - OPatch Support for RAC.

    • If this is not a RAC environment, shut down all instances and listeners associated with the Oracle home that you are updating. For more information, see Oracle Database Administrator's Guide.

  3. Set your current directory to the directory where the patch is located and then run the OPatch utility by entering the following commands:

    unzip p10248523_11201_<platform>.zip
    cd 10248523
    opatch apply
    
  4. If there are errors, refer to Section 5, "Known Issues".

3.3 Patch Post-Installation Instructions

After installing the patch, perform the following actions:

  1. Apply conflict resolution patches as explained in Section 3.3.1.

  2. Load modified SQL files into the database, as explained in Section 3.3.2.

3.3.1 Applying Conflict Resolution Patches

Apply the patch conflict resolution one-off patches that were determined to be needed when you performed the steps in Section 3.1.3, "One-off Patch Conflict Detection and Resolution".

3.3.2 Loading Modified SQL Files into the Database

The following steps load modified SQL files into the database. For a RAC environment, perform these steps on only one node.

  1. For each database instance running on the Oracle home being patched, connect to the database using SQL*Plus. Connect as SYSDBA and run the catbundle.sql script as follows:

    cd $ORACLE_HOME/rdbms/admin
    sqlplus /nolog
    SQL> CONNECT / AS SYSDBA
    SQL> STARTUP
    SQL> @catbundle.sql psu apply
    SQL> QUIT
    

    The catbundle.sql execution is reflected in the dba_registry_history view by a row associated with bundle series PSU.

    For information about the catbundle.sql script, see My Oracle Support Note 605795.1 Introduction to Oracle Database catbundle.sql.

  2. Check the following log files in $ORACLE_BASE/cfgtoollogs/catbundle for any errors:

    catbundle_PSU_<database SID>_APPLY_<TIMESTAMP>.log
    catbundle_PSU_<database SID>_GENERATE_<TIMESTAMP>.log
    

    where TIMESTAMP is of the form YYYYMMMDD_HH_MM_SS. If there are errors, refer to Section 5, "Known Issues".

3.4 Patch Post-Installation Instructions for Databases Created or Upgraded after Installation of PSU 11.2.0.2.1 in the Oracle Home

These instructions are for a database that is created or upgraded after the installation of PSU 11.2.0.2.1.

You must execute the steps in Section 3.3.2, "Loading Modified SQL Files into the Database" for any new database only if it was created by any of the following methods:

  • Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)

  • Using a script that was created by DBCA that creates a database from a sample database

There are no actions required for databases that have been upgraded.

4 Deinstallation

These instructions apply if you need to deinstall the patch.

4.1 Patch Deinstallation Instructions for a Non-RAC Environment

Follow these steps:

  1. Verify that an $ORACLE_HOME/rdbms/admin/catbundle_PSU_<database SID>_ROLLBACK.sql file exists for each database associated with this ORACLE_HOME. If this is not the case, you must execute the steps in Section 3.3.2, "Loading Modified SQL Files into the Database" against the database before deinstalling the PSU.

  2. Shut down all instances and listeners associated with the Oracle home that you are updating. For more information, see Oracle Database Administrator's Guide.

  3. Run the OPatch utility specifying the rollback argument as follows.

    opatch rollback -id 10248523
    
  4. If there are errors, refer to Section 5, "Known Issues".

4.2 Patch Post-Deinstallation Instructions for a Non-RAC Environment

Follow these steps:

  1. Start all database instances running from the Oracle home. (For more information, see Oracle Database Administrator's Guide.)

  2. For each database instance running out of the ORACLE_HOME, connect to the database using SQL*Plus as SYSDBA and run the rollback script as follows:

    cd $ORACLE_HOME/rdbms/admin
    sqlplus /nolog
    SQL> CONNECT / AS SYSDBA
    SQL> STARTUP
    SQL> @catbundle_PSU_<database SID>_ROLLBACK.sql
    SQL> QUIT
    

    In a RAC environment, the name of the rollback script will have the format catbundle_PSU_<database SID PREFIX>_ROLLBACK.sql.

  3. Check the log file for any errors. The log file is found in $ORACLE_BASE/cfgtoollogs/catbundle and is named catbundle_PSU_<database SID>_ROLLBACK_<TIMESTAMP>.log where TIMESTAMP is of the form YYYYMMMDD_HH_MM_SS. If there are errors, refer to Section 5, "Known Issues".

4.3 Patch Deinstallation Instructions for a RAC Environment

Follow these steps for each node in the cluster, one node at a time:

  1. Shut down the instance on the node.

  2. Run the OPatch utility specifying the rollback argument as follows.

    opatch rollback -id 10248523
    

    If there are errors, refer to Section 5, "Known Issues".

  3. Start the instance on the node as follows:

    srvctl start instance
    

4.4 Patch Post-Deinstallation Instructions for a RAC Environment

Follow the instructions listed in Section Section 4.2, "Patch Post-Deinstallation Instructions for a Non-RAC Environment" only on the node for which the steps in Section 3.3.2, "Loading Modified SQL Files into the Database" were executed during the patch application.

All other instances can be started and accessed as usual while you are executing the deinstallation steps.

5 Known Issues

For information about OPatch issues, see My Oracle Support Note 293369.1 OPatch documentation list.

For issues documented after the release of this PSU, see My Oracle Support Note 1263386.1 Oracle Database Patch Set Update 11.2.0.2.1 Known Issues.

Other known issues are as follows.

Issue 1   

The following ignorable errors may be encountered while running the catbundle.sql script or its rollback script:

ORA-29809: cannot drop an operator with dependent objects
ORA-29931: specified association does not exist
ORA-29830: operator does not exist
ORA-00942: table or view does not exist
ORA-00955: name is already used by an existing object
ORA-01430: column being added already exists in table
ORA-01432: public synonym to be dropped does not exist
ORA-01434: private synonym to be dropped does not exist
ORA-01435: user does not exist
ORA-01917: user or role 'XDB' does not exist
ORA-01920: user name '<user-name>' conflicts with another user or role name
ORA-01921: role name '<role name>' conflicts with another user or role name
ORA-01952: system privileges not granted to 'WKSYS'
ORA-02303: cannot drop or replace a type with type or table dependents
ORA-02443: Cannot drop constraint - nonexistent constraint
ORA-04043: object <object-name> does not exist
ORA-29832: cannot drop or replace an indextype with dependent indexes
ORA-29844: duplicate operator name specified 
ORA-14452: attempt to create, alter or drop an index on temporary table already in use
ORA-06512: at line <line number>. If this error follow any of above errors, then can be safely ignored.
ORA-01927: cannot REVOKE privileges you did not grant

6 References

The following documents are references for this patch.

Note 293369.1 OPatch documentation list

Note 360870.1 Impact of Java Security Vulnerabilities on Oracle Products

Note 468959.1 Enterprise Manager Grid Control Known Issues

Note 9952216.8 Bug 10248523 - 11.2.0.2.1 Patch Set Update (PSU)

7 Bugs Fixed by This Patch

This patch includes the following bug fixes.

7.1 CPU Molecules

CPU molecules in PSU 11.2.0.2.1:

PSU 11.2.0.2.1 contains no PSU 11.2.0.2.1 molecules.

7.2 Bug Fixes

PSU 11.2.0.2.1 contains the following new fixes:

Memory Management

9539440 - TST&PERF: QUERY ON V$SEGMENT_STATISTICS RESULTS IN ORA-4030

Automatic Storage Management

9715581 - DBMV2: EXADATA AUTO MANAGEMENT FAILED TO BRING UP DISKS ONLI

9788588 - STALENESS REGISTRY MAY GET CLEARED PREMATURELY

10019218 - ASM DROPPED DISKS BEFORE DISK_REPAIR_TIME EXPIRED

10022980 - DISK NOT EXPELLED WHEN COMPACT DISABLED

10040531 - ORA-600 [KFRHTADD01] TRYING TO MOUNT RECO DISKGROUP

10073683 - ORA-600 [KFCBINITSLOT40] ON ASM ON DBMV2 WITH BP5

10209232 - STBH: DB STUCK WITH A STALE EXTENT MAP AND RESULTS IN DATA

Generic

9735237 - ORA-7445 [_INTEL_FAST_MEMCMP()+30] DURING STRESS TESTING

9770451 - APPLICATION CRASHES WITH ORA-00600 [20022]

10013431 - LX64: DATABASE OPEN HANGS AT END OF DBCA CREATEDB, ORA-32701

10077191 - SQL EXEC PART:ORA-00600: INTERNAL ERROR CODE, ARGUMENTS: [KK

10080579 - HW ACCELERATED ENCRYPTION NEEDS TO BE ENABLE BY DEFAULT

10151017 - MERGE STATEMENT NOT BEING SHARED UNDER SPECIFIC CIRCUMSTANCE

High Availability

9744252 - MRP HANGS IN ACTIVE DATA GUARD WHEN DOING AD HOC QUERY WITH

9881076 - WHILE TRUNCATE, RO ENQUEUE IS CAUSING PROCESS HANG

10079168 - DBMV2: TOOK LONG TIME TO GET SWITCHOVER_STATUS FROM V$DATABA

10238786 - RECOVER AUTOMATIC NOT WORKING PROPERLY IN 11.2.0.2

Space Management

9956713 - FIX FOR BUG-9753577: RECOMPUTE STOPKEY ON BLOCK REPIN DURING

8 Documentation Accessibility

Our goal is to make Oracle products, services, and supporting documentation accessible to all users, including users that are disabled. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at http://www.oracle.com/accessibility/.

Accessibility of Code Examples in Documentation

Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

Access to Oracle Support

Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/support/contact.html or visit http://www.oracle.com/accessibility/support.html if you are hearing impaired.


Patch 10248523 - 11.2.0.2.1 Patch Set Update Release 11.2.0.2.1 for UNIX

Copyright © 2006, 2011, Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.

This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications.

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

This software and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.