Go to primary content

Oracle® Database

Patch 23054246 - Database Patch Set Update 12.1.0.2.160719 (Includes CPUJul2016)

Released: July 19, 2016

This document is accurate at the time of release. For any changes and additional information regarding PSU 12.1.0.2.160719, see these related documents that are available at My Oracle Support (http://support.oracle.com/):

This document includes the following sections:

1 Patch Information

From CPUJan2016 onwards, the 5th digit of the version number will be changed to reflect the release date in the format YYMMDD. See My Oracle Support Document 2061926.1 for more information.

Patch Set Update (PSU) patches are cumulative. That is, the content of all previous PSUs is included in the latest PSU patch.

PSU 12.1.0.2.160719 includes the fixes listed in Section 7, "Bugs Fixed by This Patch".

To install the PSU 12.1.0.2.160719 patch, the Oracle home must have the 12.1.0.2.0 Database installed. Subsequent PSU patches can be installed on Oracle Database 12.1.0.2.0 or any PSU with a lower 5th numeral version than the one being installed.

This patch is Oracle RAC Rolling Installable.

This patch is Database Vault installable. Review My Oracle Support Document 1195205.1 for details on how to apply this patch to a Database Vault environment.

This patch is Data Guard Standby-First Installable. See My Oracle Support Document 1265700.1 Oracle Patch Assurance - Data Guard Standby-First Patch Apply for details on how to remove risk and reduce downtime when applying this patch.

Table 1 describes installation types and security content. For each installation type, it indicates the most recent PSU patch to include new security fixes that are pertinent to that installation type. If there are no security fixes to be applied to an installation type, then "None" is indicated. If a specific PSU is listed, then apply that or any later PSU patch to be current with security fixes.

Table 1 Installation Types and Security Content

Installation Type Latest PSU with Security Fixes

Server homes

PSU 12.1.0.2.160719


Client-Only Installations

PSU 12.1.0.2.160719

Instant Client Installations

PSU 12.1.0.2.160719

(The Instant Client installation is not the same as the client-only Installation. For additional information about Instant Client installations, see Oracle Call Interface Programmer's Guide.)


2 Prerequisites

This section includes the following section:

2.1 OPatch Utility

You must use the OPatch utility version 12.1.0.1.7 or later to apply this patch. Oracle recommends that you use the latest released OPatch version for 12.1, which is available for download from My Oracle Support patch 6880880 by selecting the 12.1.0.1.0 release.

For information about OPatch documentation, including any known issues, see My Oracle Support Document 293369.1 OPatch documentation list.

3 Installation

These instructions are for all Oracle Database installations.

3.1 Patch Pre-Installation Instructions

Before you install PSU 12.1.0.2.160719, perform the following actions to check the environment and to detect and resolve any one-off patch conflicts.

3.1.1 Applying Database PSU Along Side the Oracle JavaVM Component 12.1.0.2.x Database PSU Patch

From October 2014 onwards, the Oracle JavaVM Component 12.1.0.2.x Database PSU patch is also available as a separate patch. This patch is not Oracle RAC Rolling Installable. For customers wanting to install both patches together during a single downtime window, follow the various Patching Options listed in the My Oracle Support Document 1929745.1 - Oracle Recommended Patches -- "Oracle JavaVM Component Database PSU" (OJVM PSU) Patches.

3.1.2 Environments with Grid Infrastructure

If you are installing the PSU to an environment that has a Grid Infrastructure home, note the following:

  • Grid Infrastructure PSU 12.1.0.2.160719 Patch 23273629 should be applied to the Grid Infrastructure home and Database home using the readme instructions provided with the patch.

3.1.3 Environment Checks

  1. Ensure that the $PATH definition has the following executables: make, ar, ld, and nm.

    The location of these executables depends on your operating system. On many operating systems, they are located in /usr/ccs/bin, in which case you can set your PATH definition as follows:

    export PATH=$PATH:/usr/ccs/bin
    

3.1.4 One-off Patch Conflict Detection and Resolution

For an introduction to the PSU one-off patch concepts, see "Patch Set Updates Patch Conflict Resolution" in My Oracle Support Document 854428.1 Patch Set Updates for Oracle Products.

The fastest and easiest way to determine whether you have one-off patches in the Oracle home that conflict with the PSU, and to get the necessary conflict resolution patches, is to use the Patch Recommendations and Patch Plans features on the Patches & Updates tab in My Oracle Support. These features work in conjunction with the My Oracle Support Configuration Manager. Recorded training sessions on these features can be found in Document 603505.1.

However, if you are not using My Oracle Support Patch Plans, the My Oracle Support Conflict Checker tool enables you to upload an OPatch inventory and check the patches that you want to apply to your environment for conflicts.

If no conflicts are found, you can download the patches. If conflicts are found, the tool finds an existing resolution to download. If no resolution is found, it will automatically request a resolution, which you can monitor in the Plans and Patch Requests region of the Patches & Updates tab.

For more information, see Knowledge Document 1091294.1, How to use the My Oracle Support Conflict Checker Tool.

Or, use the following steps to manually discover conflicts and resolutions:

  1. Determine whether any currently installed one-off patches conflict with the PSU patch as follows:

    unzip p23054246_12102_<platform>.zip
    cd 23054246
    opatch prereq CheckConflictAgainstOHWithDetail -ph ./
    
  2. The report will indicate the patches that conflict with PSU 23054246 and the patches for which PSU 23054246 is a superset.

    Note that Oracle proactively provides PSU 12.1.0.2.160719 one-off patches for common conflicts.

  3. Use My Oracle Support Document 1321267.1 Database Patch conflict resolution to determine, for each conflicting patch, whether a conflict resolution patch is already available, and if you need to request a new conflict resolution patch or if the conflict may be ignored.

  4. When all the one-off patches that you have requested are available at My Oracle Support, proceed with Section 3.2, "Patch Installation Instructions".

3.2 Patch Installation Instructions

Follow these steps:

  1. If you are using a Data Guard Physical Standby database, you must install this patch on both the primary database and the physical standby database, as described by My Oracle Support Document 278641.1.

  2. If this is a RAC environment, install the PSU patch using the OPatch rolling (no downtime) installation method as the PSU patch is rolling RAC installable. Refer to My Oracle Support Document 244241.1 Rolling Patch - OPatch Support for RAC.

  3. If this is not a RAC environment, shut down all instances and listeners associated with the Oracle home that you are updating. For more information, see Oracle Database Administrator's Guide.

  4. Set your current directory to the directory where the patch is located and then run the OPatch utility by entering the following commands:

    unzip p23054246_12102_<platform>.zip
    cd 23054246
    opatch apply
    
  5. If there are errors, refer to Section 5, "Known Issues".

3.3 Patch Post-Installation Instructions

After installing the patch, perform the following actions:

  1. Apply conflict resolution patches as explained in Section 3.3.1.

  2. Load modified SQL files into the database, as explained in Section 3.3.2.

  3. Upgrade Oracle Recovery Manager catalog, as explained in Section 3.3.3.

3.3.1 Applying Conflict Resolution Patches

Apply the patch conflict resolution one-off patches that were determined to be needed when you performed the steps in Section 3.1.4, "One-off Patch Conflict Detection and Resolution".

3.3.2 Loading Modified SQL Files into the Database

The following steps load modified SQL files into the database. For a RAC environment, perform these steps on only one node.

Datapatch is run to complete the post-install SQL deployment for the PSU. For further details about Datapatch, including Known Issues and workarounds to common problems, see: Database 12c Post Patch SQL Automation (Doc ID 1585822.1).

  1. For each separate database running on the same shared Oracle home being patched, run the datapatch utility as described in Table 2.

    Table 2 Steps to Run the Datapatch Utility for Standalone DB Versus Single/Multitenant (CDB/PDB) DB

    Steps Standalone DB Steps Single/Multitenant (CDB/PDB) DB

    1

    % sqlplus /nolog

    1

    % sqlplus /nolog

    2

    SQL> Connect / as sysdba

    2

    SQL> Connect / as sysdba

    3

    SQL> startup

    3

    SQL> startup

    4

    SQL> quit

    4

    SQL> alter pluggable database all open;Foot 1 

    5

    % cd $ORACLE_HOME/OPatch

    5

    SQL> quit

    6

    % ./datapatch -verbose

    6

    % cd $ORACLE_HOME/OPatch



    7

    % ./datapatch -verbose


    Footnote 1 It is recommended the Post Install step be run on all pluggable databases; however, the following command (SQL> alter pluggable database PDB_NAME open ) could be substituted to only open certain PDBs in the single/multitenant database. Doing so will result in the Post Install step only being run on the CDB and opened PDB's. To update a pluggable database at a later date (skipped or newly plugged in), open the database using the alter pluggable database command mentioned previously and rerun the datapatch utility. See My Oracle Support Document 1935365.1 Multitenant Unplug/Plug Best Practices for more information about the procedure for unplugging/plugging with different patch releases (in both directions).

    The datapatch utility will then run the necessary apply scripts to load the modified SQL files into the database. An entry will be added to the dba_registry_sqlpatch view reflecting the patch application. In the dba_registry_sqlpatch view, verify the Status for the APPLY is "SUCCESS". For any other status, refer to the following My Oracle Support note for additional information and actions: Document 1609718.1 Datapatch Known Issues.

  2. Check the following log files in $ORACLE_BASE/cfgtoollogs/sqlpatch/23054246/<unique patch ID> for errors:

    23054246_apply_<database SID>_<CDB name>_<timestamp>.log
    

    where database SID is the database SID, CDB name is the name of the multitenant container database, and timestamp is of the form YYYYMMMDD_HH_MM_SS.

  3. This patch now includes the OJVM Mitigation patch (Patch:19721304). If an OJVM PSU is installed or planned to be installed, no further actions are necessary. Otherwise, the workaround of using the OJVM Mitigation patch can be activated. As SYSDBA do the following from the admin directory:

    SQL > @dbmsjdev.sql
    SQL > exec dbms_java_dev.disable
    

    For more information on the OJVM mitigation patch, see Document 1929745.1 Oracle Recommended Patches -- "Oracle JavaVM Component Database PSU" (OJVM PSU) Patches.

3.3.3 Upgrade Oracle Recovery Manager Catalog

If you are using the Oracle Recovery Manager, the catalog needs to be upgraded. Enter the following command to upgrade it:

$ rman catalog username/password@alias
RMAN> UPGRADE CATALOG;

3.4 Patch Post-Installation Instructions for Databases Created or Upgraded after Installation of PSU 12.1.0.2.160719 in the Oracle Home

You must execute the steps in Section 3.3.2, "Loading Modified SQL Files into the Database" for any new database. There are no actions required for databases that have been upgraded.

For more information, see My Oracle Support, 12.1:DBCA(Database Creation) does not execute ”datapatch (Doc ID 2084676.1).

4 Deinstallation

These instructions apply if you need to deinstall the patch.

4.1 Patch Deinstallation Instructions for a Non-RAC Environment

Follow these steps:

  1. Shut down all instances and listeners associated with the Oracle home that you are updating. For more information, see Oracle Database Administrator's Guide.

  2. Run the OPatch utility specifying the rollback argument as follows.

    opatch rollback -id 23054246
    
  3. If there are errors, refer to Section 5, "Known Issues".

4.2 Patch Post-Deinstallation Instructions for a Non-RAC Environment

After deinstalling the patch, perform the following actions:

4.2.1 Run the datapatch Utility

Datapatch is run to complete the post-deinstall SQL deployment for the PSU. For further details about Datapatch, including Known Issues and workarounds to common problems, see: Database 12c Post Patch SQL Automation (Doc ID 1585822.1).

Follow these steps:

  1. For each separate database running on the same shared Oracle home being patched, run the datapatch utility as described in Table 3. If this is Oracle RAC, run datapatch on only one instance.

    Table 3 Steps to Run the datapatch Utility for Standalone DB Versus Single/Multitenant (CDB/PDB) DB

    Steps Standalone DB Steps Single/Multitenant (CDB/PDB) DB

    1

    % sqlplus /nolog

    1

    % sqlplus /nolog

    2

    SQL> Connect / as sysdba

    2

    SQL> Connect / as sysdba

    3

    SQL> startup

    3

    SQL> startup

    4

    SQL> quit

    4

    SQL> alter pluggable database all open;Foot 1 

    5

    % cd $ORACLE_HOME/OPatch

    5

    SQL> quit

    6

    % ./datapatch -verbose

    6

    % cd $ORACLE_HOME/OPatch



    7

    % ./datapatch -verbose


    Footnote 1 It is recommended the Post Install step be run on all pluggable databases; however, the following command (SQL> alter pluggable database PDB_NAME open ) could be substituted to only open certain PDBs in the single/multitenant database. Doing so will result in the Post Install step only being run on the CDB and opened PDB's. To update a pluggable database at a later date (skipped or newly plugged in), open the database using the alter pluggable database command mentioned previously and rerun the datapatch utility. See My Oracle Support Document 1935365.1 Multitenant Unplug/Plug Best Practices for more information about the procedure for unplugging/plugging with different patch releases (in both directions).

    The datapatch utility will then run the necessary rollback scripts. An entry will be added to the dba_registry_sqlpatch view reflecting the patch application. In the dba_registry_sqlpatch view, verify the Status for the ROLLBACK is "SUCCESS". For any other status, refer to the following My Oracle Support note for additional information and actions: Document 1609718.1 Datapatch Known Issues.

  2. Check the following log files in $ORACLE_BASE/cfgtoollogs/sqlpatch/23054246/<unique patch ID> for errors:

    19303936_rollback_<database SID>_<CDB name>_<timestamp>.log
    

    where database SID is the database SID, CDB name is the name of the multitenant container database, and timestamp is of the form YYYYMMMDD_HH_MM_SS.

4.2.2 Upgrade Oracle Recovery Manager Catalog

If you are using the Oracle Recovery Manager, the catalog needs to be upgraded. Enter the following command to upgrade it:

$ rman catalog username/password@alias
RMAN> UPGRADE CATALOG;
RMAN> UPGRADE CATALOG;

4.3 Patch Deinstallation Instructions for Oracle RAC Environment

Patch deinstallation instructions for Oracle RAC includes these environments:

Follow these steps for each node in the cluster, one node at a time.

  1. Shut down the instance on the node.

  2. Run the OPatch utility specifying the rollback argument as follows.

    opatch rollback -id 23054246
    

    If there are errors, refer to Section 5, "Known Issues".

  3. Start the instance on the node as follows:

    srvctl start instance
    

4.4 Patch Post-Deinstallation Instructions for Oracle RAC Environment

Follow the instructions listed in Section Section 4.2, "Patch Post-Deinstallation Instructions for a Non-RAC Environment" only on the node for which the steps in Section 3.3.2, "Loading Modified SQL Files into the Database" were executed during the patch application.

All other instances can be started and accessed as usual while you are executing the deinstallation steps.

5 Known Issues

For information about OPatch issues, see My Oracle Support Document 293369.1 OPatch documentation list.

For issues documented after the release of this PSU, see My Oracle Support Document 2136770.1 Oracle Database Patch Set Update 12.1.0.2.160719 Known Issues.

Other known issues are as follows.

Issue 1   

The following ignorable errors may be encountered while running the datapatch/catbundle.sql script or its rollback script:

ORA-29809: cannot drop an operator with dependent objects
ORA-29931: specified association does not exist
ORA-29830: operator does not exist
ORA-00942: table or view does not exist
ORA-00955: name is already used by an existing object
ORA-01430: column being added already exists in table
ORA-01432: public synonym to be dropped does not exist
ORA-01434: private synonym to be dropped does not exist
ORA-01435: user does not exist
ORA-01917: user or role 'XDB' does not exist
ORA-01920: user name '<user-name>' conflicts with another user or role name
ORA-01921: role name '<role name>' conflicts with another user or role name
ORA-01952: system privileges not granted to 'WKSYS'
ORA-02303: cannot drop or replace a type with type or table dependents
ORA-02443: Cannot drop constraint - nonexistent constraint
ORA-04043: object <object-name> does not exist
ORA-29832: cannot drop or replace an indextype with dependent indexes
ORA-29844: duplicate operator name specified 
ORA-14452: attempt to create, alter or drop an index on temporary table already in use
ORA-06512: at line <line number>. If this error follow any of above errors, then can be safely ignored.
ORA-01927: cannot REVOKE privileges you did not grant
ORA-02289: sequence does not exist 
Issue 2   

On HP-UX Itanium systems, the following ignorable warnings may be encountered during the relinking of the client_sharedlib:

OUI-67215: OPatch found the word "error" in the stderr of the make command.
Please look at this stderr. You can re-run this make command.
Stderr output: ld: Invalid dynamic relocation needed for
read-only section, in input file
/scratch/installs/DB/64bit/DB/12101/server/lib/libpls12.a[pfrd.o], for symbol
.text at offset b00
  ...
ld: Invalid non-PIC relocation for symbol ".rodata" in file
"/scratch/installs/DB/64bit/DB/12101/server/lib/libpls12.a[plzsql.o]"
(section index 5, offset 0x92).
39651 errors.
  ...
ld: Invalid non-PIC relocation for symbol ".rodata" in file
"/scratch/installs/DB/64bit/DB/12101/server/lib/libpls12.a[plzsql.o]"
(section index 5, offset 0x92).
39651 errors.
 
OUI-67008:OPatch Session completed with warnings.

6 References

The following documents are references for this patch.

Document 1585822.1 Database 12c Post Patch SQL Automation

Document 293369.1 OPatch documentation list

Document 360870.1 Impact of Java Security Vulnerabilities on Oracle Products

Document 1321267.1 Database Patch conflict resolution

Document 23054246.8 Database 12.1.0.2.160719 Patch Set Update (PSU)

Document 1591141.1 12.1.0.2 Patch Set Updates - List of Fixes in each PSU

Document 1561792.2 Patching Assistant: Oracle Database/Client - Select PSU/SPU (aka CPU)

7 Bugs Fixed by This Patch

This patch includes the following bug fixes.

7.1 Bug Fixes

See My Oracle Support Document 1924126.1 that documents all the non-security bugs fixed in each 12.1.0.2 Patch Set Update (PSU).

PSU 12.1.0.2.160719 contains the following new fixes:

Advanced Queuing

   17722075 - ORA-7445 [KKCNRLI()+615]
   20868862 - UTLRP.SQL FAILED WITH ORA-600 [KWRCFPB: IOT$ ROP$ MISMATCH]
   21665897 - FIX FOR BUG 14712567 CAUSES LARGE NUMBERS OF AQ$_PLSQL_NTFN_% TO BE SPAWNED

Automatic Storage Management

   21099555 - XDWK GENERATES EXCESSIVE REDO REBUILDING METADATA SIGNIFICANTLY DELAYING RESYNC

Buffer Cache Management

   19366375 - CORRECT ELAPSED TIME CALCULATION AND ADD DIAGNOSTIC FOR BUG 18920073
   20798891 - ORA-8103 ON QUERIES AGAINST BLOCK TYP=58, NO DDLS
   21184223 - DBWR TRACING PLACEHOLDER - TO TRACE WHEN A BUFFER CANNOT BE WRITTEN REPEATEDLY
   21188584 - ORA-07445:  [KCBLDRGET()+14064] WHEN RUNNING UTLRP
   21246723 - ORA-8103 DURING SELECT STATEMENT REFERING TO KTRVAC: PATH TYP=40
   21263635 - ORA-7445 KCBZWB AND THEN PMON CRASHED THE INSTANCE WITH ORA-600 [1100]

Generic

   14283239 - HIGH CPU  FOR SQL REQUESTS WITH SYSAUTH$ INVOLVED
   17414008 - WRONG RESULTS FOR FUNCTIONS RETURNING OBJECT TYPES
   18549238 - PRIMARY KEY ALLOWS NULLS AFTER DBMS_REDEFINITION OF TABLE
   18740837 - USAGE OF UNDEFINED BEHAVIOR IS SSLEQ AND LTMEQ CAUSES HANG IN DISAPTCHER
   19201867 - SR12.2PX_HYBRID_LOAD - TRC - ORA-600 [KXSPOAC : EXL 1]
   19308965 - RAW HAZARDS SEEN ON SOLARIS T5
   19578350 - ORA-7445 [KGLBRK()+47] [SIGSEGV] [ADDR:0X30] [PC:0XD5CCF7F]
   20009833 - ORA-600 [KGHSTACK_FREE1], [PAPWORKSPACE: QERPXMOBJVECINIT] WITH SUBQUERY PRUNING
   20228093 - MATERIALIZED VIEW DEFERRED MODE ORA-00918: COLUMN AMBIGUOUSLY DEFINED
   20880215 - ORA-7445 [QCSISCOLINFRO()+358] FOR ADD COLUMN WITH DEFAULT AND ENABLE NOVALIDATE
   21220620 - WRONG RESULT ON 12C WHEN QUERYING PARTITIONED TABLE WITH DISTINCT CLAUSE
   21296029 - WRONG RESULT ON COMMIT IN DISTRIBUTED TRANSACTION
   21373473 - INSTANCE TERMINATED AS  LMD0 AND LMD2 HUNG FOR MORE THAN 70 SECS
   21629064 - ORA-600 [3020] KCOX_FUTURE ON STANDBY FOR KTU UNDO BLOCK SEQ:254
   22075064 - GSI-12C :- ADVERSE SYSTEM IMPACT DUE TO CONCURRENT CURSOR OBSOLETION DUMPS
   22551446 - DML TRIGGERS SHOULD NOT FIRE DURING ALTER DATABASE NATIONAL CHARACTER SET
   23260854 - TRACKING BUG TO RESOLVE REGRESSION CAUSED BY BAD BLRS FOR BUG 13542050
   21291274 - Fix for bug 21291274
   22366558 - Fix for bug 22366558

High Availability

   19524158 - EXCESSIVE READMOSTLY KJMVALIDATE MESSAGES IN LMS TRACES
   19931709 - ORA-1343 DUE TO INCOMPLETE SUPPLEMENTAL LOGGING DURING DATABASE/PDB OPEN
   20378086 - RMAN-06531 CHANGING LEVEL 0 BACKUPSET TO KEEP IN 12C
   20848335 - RMAN STANDBY ALWAYS SHOW ORA-20079 DESPITE RESYNC IS DONE FROM PRIMARY
   20977794 - RMAN DUPLICATE ERROR: ORA-65500: COULD NOT MODIFY DB_UNIQUE_NAME, RESOURCE EXIST
   21649497 - OPC-RAC: UNREASONABLE VALUE OF PERCENT IN RLB EVENT

Oracle Multitenant

   17867700 - LNX64-12102-CDB:ORA-600 [KSPCREPDB: BAD KSPMAS]  WHEN INSTANCE TASK AND OPEN PDB

Oracle Security

   17532734 - ORA-28104: INPUT VALUE FOR DB USER OR ROLE IS NOT VALID ON UPGRADE
   19013183 - WRONG RESULTS WITH CONTEXT SENSITIVE VPD POLICY IN PL/SQL BLOCK
   21241829 - Fix for bug 21241829
   22296366 - Fix for bug 22296366
   22507210 - Fix for bug 22507210
   22507234 - Fix for bug 22507234

Oracle Space Management

   16863642 - ORA-600 [KCBZWFCRO_2] ASSERT FROM FORCE-CR-OVERRIDE BUFFER
   19402853 - ORA-600 [17182] SIGNALED ON A PARALLEL SLAVE
   20528052 - AQ$_PLSQL_NTFN JOBS EXECUTED IN LARGE NUMBERS AFFECTING DATABASE PERFORMANCE
   20708701 - ORA-8103 WHILE RUNNING A QUERY ON EHCC IN BIG FILE TABLESPACE
   20898391 - WRONG RESULTS FOR QUERY ON INDEX SCAN
   20920911 - ORA-00600 [KAFGER BUFFER OVERWRITE] EVEN IF PATCH 20711021 IS INSTALLED

Oracle Utilities

   22178855 - TST&PERF: BEEHIVE: UPGRADE TOOK LONG TIME
   22380919 - Fix for bug 22380919

Oracle Virtual Operating System Services

   17319928 - CDB ON ACFS:PDB CLONING FAILS WHEN DATAFILES ARE CREATED IN RW SNAP
   21450666 - ORA-00600: [KSPFLG: INVALID PARAM] DURING UPGARDE FROM 12.1.0.2 TO 12.2

PL/SQL

   18191823 - ORA-600 [19708] WHERE PK IN (SELECT... FROM TABLE(PKS) FOR SPEC LEVEL TYPE DEF
   18797519 - PLS-707 [2602] USING SUBTYPES OF CURSOR%ROWTYPE TYPE AFTER UPGRADE TO 12.1
   18851894 - ORA-600 [PEVMSQL.C: PFRDFN [252]] FETCHING A CURSOR
   19534363 - WRONG RESULTS FROM REGEXP FUNCTIONS AFTER CREATE OR REPLACE PACKAGE BODY
   20267166 - ORA-7445 [PHD_TOID_BY_NAME()+366] REPLACING TYPE IN PACKAGE WITH SIMILAR SUBTYPE

Patch Automation

   22815955 - 12102 FADBBP 22653029: DATAPATCH COMPLETED SUCCESSFULLY BUT ALL SQL WERE NOT RUN
   22923409 - REL11ST18--CDB/PDB-MUTIPLE DATAPATCH SESSIONS CREATING LOCKS IN CDB
   23229229 - MAKE IGNORABLE LIST COMMON FOR ALL PATCHES

XML Database

   20898997 - XMLTYPESUP: QCTOXSNLB SHOULD NOT CHECK AGAINST SNAPSHOT SIZE

8 Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/us/corporate/accessibility/index.html.

Access to Oracle Support

Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/support/contact.html or visit http://www.oracle.com/us/corporate/accessibility/support/index.html if you are hearing impaired.


Patch 23054246 - Database Patch Set Update 12.1.0.2.160719 (Includes CPUJul2016) for UNIX

Copyright © 2006, 2016, Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark licensed through X/Open Company, Ltd.

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.