===============================
Interim Patch for Bug: 22377946
===============================

Date: Dec 30, 2015
---------------------------------
Platform Patch for   : Linux x86-64
Product Patched      : Oracle HTTP Server
Product Version      : 12.1.2.0.0

This document describes how to install the interim patch for
bug # 22377946. It includes the following sections: 

	Section 1, "Prerequisites"

	Section 2, "Pre-Installation Instructions"

	Section 3, "Installation Instructions"

	Section 4, "Post-Installation Instructions"

	Section 5, "Deinstallation Instructions"

	Section 6, "Post Deinstallation Instructions" 

	Section 7, "Bugs Fixed by This Patch" 
	

1 Prerequisites
----------------

Ensure that you meet the following requirements before you install or
deinstall the patch:
	
1. Before applying the non-mandatory patches, ensure that you have the
   exact symptoms described in the bug.

2. Review and download the latest version of OPatch 11.1.x via Bug 6880880.
   (OPatch version 13.1.0.0.0 or higher)
    
    Patch : p6880880_131000_Generic.zip
    
   a. Oracle recommends that all customers be on the latest version of OPatch.
      Review the My Oracle Support note 224346.1, and follow the instructions
      to update to the latest version if needed. Click the following link to
      view the note: 
  
      Note 224346.1  - Opatch - Where Can I Find the Latest Version of Opatch?
      https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=224346.1

   b. For FMW Opatch usage, refer to the document at:
      http://download.oracle.com/docs/cd/E21764_01/doc.1111/e16793/opatch.htm
   
3. Verify the OUI Inventory.
   OPatch needs access to a valid OUI inventory to apply patches. 
   
   Note: This needs the ORACLE_HOME to be set(refer section "2. Pre-Installation Instructions") 
   prior to run the below commands:
   
   Validate the OUI inventory with the following commands:

   $ opatch lsinventory  

   If the command errors out, contact Oracle Support and work to validate
   and verify the inventory setup before proceeding.

4. Confirm the executables appear in your system PATH.

   The patching process will use the unzip and the OPatch executables. After
   setting the ORACLE_HOME environment, confirm if the following executables
   exist, before proceeding to the next step:

	- opatch
	- unzip

   If either of these executables do not show in the PATH, correct the
   problem before proceeding.

5. Create a location for storing the unzipped patch. This location
   will be referred to later in the document as PATCH_TOP.
   

2 Pre-Installation Instructions
-------------------------------

1. Set the ORACLE_HOME environment variable to WebTier Install Home.
      
2. Stop all servers (Admin Server and all Managed Server(s)).

3. Stop all opmn, OHS services.


3 Installation Instructions
---------------------------

Note: If you are using a 64-bit install, then 64-bit jdk only should be used throughout. 
      This should include both shiphome install and patch application. Although you can 
      use 32-bit jdk on 64-bit boxes, but since 64-bit is the primary platform, you must 
      use 64-bit jdks for all such installations.  
      
      OPatch commands should be run with -jre option as :

 e.g. opatch apply -jre $ORACLE_HOME/jdk/jre
        or
       opatch rollback -id <patch_id> -jre $ORACLE_HOME/jdk/jre 


1. Unzip the patch zip file into the PATCH_TOP.

   $ unzip -d PATCH_TOP p22377946_121200_Linux-x86-64.zip
   
2. Set your current directory to the directory where the patch is located.

   $ cd PATCH_TOP/22377946

3. Run OPatch to apply the patch.

   $ opatch apply
       
Note:
-----
When OPatch starts, it validates the patch and makes sure that there are no
conflicts with the software already installed in the ORACLE_HOME.

In case of opatch conflict, you will see a warning message similar to the one mentioned below:

	Interim Patch XXXX has Conflict with patch(es) [ YYYY ] in OH ...
	Conflict patches: YYYY
	Patch(es) YYYY conflict with the patch currently being installed (XXXX).
	If you continue, patch(es) YYYY will be rolled back and the new patch (XXXX) will be installed.

If a merge of the new patch (XXXX) and the conflicting patch(es) ( YYYY) is required,
contact Oracle Support Services and request a Merged patch.

Do you want to proceed? [y|n]
n

You must stop the patch installation and contact oracle support on how to proceed.


4 Post-Installation Instructions
---------------------------------

1. Start all servers (Admin Server and all Managed Server(s)).

2. Start all opmn, OHS services.
  

5 Deinstallation Instructions
------------------------------

If you experience any problems after installing this patch, remove the patch as
follows:

1. Make sure to follow the same Prerequisites or pre-install steps (if any)
   when deinstalling a patch.  
   This includes setting up any environment variables like ORACLE_HOME and
   verifying the OUI inventory before deinstalling.

2. Change to the directory where the patch was unzipped.

   $ cd PATCH_TOP/22377946

3. Run OPatch to deinstall the patch.

   $ opatch rollback -id 22377946
                          

6 Post Deinstallation Instructions
-----------------------------------

1. Restart all servers (Admin Server and all Managed Server(s))

2. Restart all opmn, OHS services.


7 Bugs Fixed by This Patch
--------------------------

17165063 - Fix for bug 17165063
19288606 - Fix for bug 19288606
19319912 - Fix for bug 19319912
19320318 - Fix for bug 19320318
19320346 - Fix for bug 19320346
19320420 - Fix for bug 19320420
19427272 - Fix for bug 19427272
19427597 - Fix for bug 19427597
19436186 - Fix for bug 19436186
19438407 - Fix for bug 19438407
19647609 - Fix for bug 19647609
19304888 - FIX FOR BUG 19304888
20806507 - FIX FOR BUG 20806507
20900385 - FIX FOR BUG 20900385
21305938 - FIX FOR BUG 21305938
17572242 - FIX FOR BUG 17572242

-----------------------------------------------------------------------------
DISCLAIMER:

This interim patch has only undergone basic unit testing, and has not been
through a complete test cycle generally followed for a production patch set. 
Though the fixes in this document rectifies the bug, Oracle Corporation will
not be responsible for other issues that may arise due to these fixes. 
Oracle Corporation recommends to later upgrade to the next production patch
set, when available. Applying this patch could overwrite other interim
patches applied since the last patch set. Customers need to make a request
to Oracle Support for a patch that includes those fixes, as well as inform
Oracle Support about all the patches installed when a Service Request is
opened. Please download, test, and provide feedback as soon as possible
to assist in the timely resolution of this problem.

Copyright (c) 2015, Oracle and/or its affiliates. All rights reserved.
-----------------------------------------------------------------------------
