NTP Status, Process, and Configuration Information
NTP Status
Using: ntpq -p
| remote |
refid |
st |
t |
when |
poll |
reach |
delay |
offset |
jitter |
| +ns1.ewr.datapip |
204.152.184.72 |
2 |
u |
760 |
1024 |
377 |
75.879 |
3.989 |
0.138 |
| *ns3.datapipe.ne |
204.152.184.72 |
2 |
u |
285 |
1024 |
377 |
0.513 |
-0.342 |
0.137 |
Back to top
NTP Process
ntp 4163 1 0 May05 ? 00:00:00 ntpd -u ntp:ntp -p /var/run/ntpd.pid
Back to top
NTP Configuration
Information Taken from /etc/ntp.conf
# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery
# Permit all access over the loopback interface. This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
restrict -6 ::1
# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
# server 0.rhel.pool.ntp.org
# server 1.rhel.pool.ntp.org
# server 2.rhel.pool.ntp.org
#broadcast 192.168.1.255 key 42 # broadcast server
#broadcastclient # broadcast client
#broadcast 224.0.1.1 key 42 # multicast server
#multicastclient 224.0.1.1 # multicast client
#manycastserver 239.255.254.254 # manycast server
#manycastclient 239.255.254.254 key 42 # manycast client
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available.
# server 127.127.1.0 # local clock
# # fudge 127.127.1.0 stratum 10
# Drift file. Put this in a directory which the daemon can write to.
# No symbolic links allowed, either, since the daemon updates the file
# by creating a temporary in the same directory and then rename()'ing
# it to the file.
driftfile /var/lib/ntp/drift
# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography.
keys /etc/ntp/keys
# Specify the key identifiers which are trusted.
#trustedkey 4 8 42
# Specify the key identifier to use with the ntpdc utility.
#requestkey 8
# Specify the key identifier to use with the ntpq utility.
#controlkey 8
# server time.datapipe.net
# server ntp.ewr.datapipe.net
# server ntp.sjc.datapipe.net
server time.datapipe.net
server ntp.ewr.datapipe.net
server ntp.sjc.datapipe.net
Back to top